Nortel-Magellan-Passport-TimeMIB
File:
Nortel-Magellan-Passport-TimeMIB.mib (32747 bytes)
Imported modules
Imported symbols
Defined Types
| TimeRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
timeRowStatus |
RowStatus |
|
| |
timeComponentName |
DisplayString |
|
| |
timeStorageType |
StorageType |
|
| |
timeIndex |
NonReplicated |
|
| TimeOperEntry |
|
| SEQUENCE |
|
|
|
| |
timeNetworkTime |
EnterpriseDateAndTime |
|
| |
timeSyncStatus |
INTEGER |
|
| |
timeSyncSource |
IpAddress |
|
| |
timeTimeOffset |
Unsigned32 |
|
| |
timeModuleTime |
EnterpriseDateAndTime |
|
| |
timeOffset |
INTEGER |
|
| |
timeMainServer |
IpAddress |
|
| |
timeXntpVersion |
Unsigned32 |
|
| TimeSyncSourcesEntry |
|
| SEQUENCE |
|
|
|
| |
timeSyncSourcesValue |
IpAddress |
|
| TimeServerRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
timeServerRowStatus |
RowStatus |
|
| |
timeServerComponentName |
DisplayString |
|
| |
timeServerStorageType |
StorageType |
|
| |
timeServerIndex |
Integer32 |
|
| TimeServerProvEntry |
|
| SEQUENCE |
|
|
|
| |
timeServerIpAddress |
IpAddress |
|
| |
timeServerIpStack |
INTEGER |
|
| TimeServerStateEntry |
|
| SEQUENCE |
|
|
|
| |
timeServerAdminState |
INTEGER |
|
| |
timeServerOperationalState |
INTEGER |
|
| |
timeServerUsageState |
INTEGER |
|
| TimeServerOperEntry |
|
| SEQUENCE |
|
|
|
| |
timeServerXntpVersion |
Unsigned32 |
|
| |
timeServerStratum |
Unsigned32 |
|
| |
timeServerPoll |
Unsigned32 |
|
| |
timeServerPktSent |
Counter32 |
|
| |
timeServerPktRecv |
Counter32 |
|
| |
timeServerPktValid |
Counter32 |
|
| |
timeServerStatus |
OCTET STRING |
|
| NSRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
nSRowStatus |
RowStatus |
|
| |
nSComponentName |
DisplayString |
|
| |
nSStorageType |
StorageType |
|
| |
nSIndex |
NonReplicated |
|
| NSProvEntry |
|
| SEQUENCE |
|
|
|
| |
nSPrimaryReference |
RowPointer |
|
| |
nSSecondaryReference |
RowPointer |
|
| |
nSTertiaryReference |
RowPointer |
|
| NSStateEntry |
|
| SEQUENCE |
|
|
|
| |
nSAdminState |
INTEGER |
|
| |
nSOperationalState |
INTEGER |
|
| |
nSUsageState |
INTEGER |
|
| NSOperEntry |
|
| SEQUENCE |
|
|
|
| |
nSClockSyncState |
INTEGER |
|
| |
nSActiveReference |
RowPointer |
|
| |
nSStandbyReference |
RowPointer |
|
Defined Values
| timeMIB |
1.3.6.1.4.1.562.2.4.2.13 |
| OBJECT IDENTIFIER |
|
|
|
| time |
1.3.6.1.4.1.562.2.4.1.19 |
| OBJECT IDENTIFIER |
|
|
|
| timeRowStatusTable |
1.3.6.1.4.1.562.2.4.1.19.1 |
| This entry controls the addition and deletion of
time components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
TimeRowStatusEntry |
|
| timeRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.19.1.1 |
| A single entry in the table represents a single
time component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
TimeRowStatusEntry |
|
|
| timeRowStatus |
1.3.6.1.4.1.562.2.4.1.19.1.1.1 |
| This variable is used as the basis for SNMP naming of
time components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| timeComponentName |
1.3.6.1.4.1.562.2.4.1.19.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| timeStorageType |
1.3.6.1.4.1.562.2.4.1.19.1.1.4 |
| This variable represents the storage type value for the
time tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| timeIndex |
1.3.6.1.4.1.562.2.4.1.19.1.1.10 |
| This variable represents the index for the time tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| timeOperTable |
1.3.6.1.4.1.562.2.4.1.19.10 |
| This group contains the operational attributes of the Time
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
TimeOperEntry |
|
| timeOperEntry |
1.3.6.1.4.1.562.2.4.1.19.10.1 |
| An entry in the timeOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
TimeOperEntry |
|
|
| timeNetworkTime |
1.3.6.1.4.1.562.2.4.1.19.10.1.1 |
| The networkTime attribute represents the current date and time. The
operator resets the current date and time by setting this attribute. If
syncStatus is synchronized or synchronizing, the set verb is
disabled. |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
EnterpriseDateAndTime |
Size(0|19) |
|
| timeSyncStatus |
1.3.6.1.4.1.562.2.4.1.19.10.1.2 |
| This attribute indicates the XNTP (Network Time Protocol)
synchronization status of this module. If the value is synchronized
or synchronizing, the syncSource attribute indicates the IP address
of the main network time server.
The values have the following meanings:
synchronized -- The module is synchronized with the network time
server.
unsynchronized -- There is no network time server selected as
XNTP server for the module to synchronize its time with.
synchronizing -- The module is trying to synchronize with the
network time server.
unknown -- The synchronization status of the module is unknown. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
synchronized(0), unsynchronized(1), synchronizing(4), unspecified(5) |
|
| timeSyncSource |
1.3.6.1.4.1.562.2.4.1.19.10.1.3 |
| The syncSource is the IP address of the time server host to which
the module's syncStatus is synchronized. If the module's syncStatus
is unsynchronized, the address is 0.0.0.0. |
| Status: obsolete |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| timeTimeOffset |
1.3.6.1.4.1.562.2.4.1.19.10.1.4 |
| The timeOffset attribute is the number of minutes, to add to the
reference time, which is equal to the Universal Coordinated Time
(UTC), to obtain the moduleTime. |
| Status: obsolete |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..1440 |
|
| timeModuleTime |
1.3.6.1.4.1.562.2.4.1.19.10.1.5 |
| This attribute indicates the current date and time on this module.
The moduleTime is obtained by adding an offset to the reference
time, which is the Universal Time Coordinated (UTC). When the
moduleTime is set, it keeps the value even if the card boots. It is the
time used for time stamps, such as in alarms and accounting data.
The operator resets the current date and time by setting this attribute
when syncStatus is unsynchronized. Setting this attribute is not
allowed if syncStatus is synchronized or synchronizing. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
EnterpriseDateAndTime |
Size(0|19) |
|
| timeOffset |
1.3.6.1.4.1.562.2.4.1.19.10.1.6 |
| This attribute specifies the number of minutes to be added to the
reference time, which is Universal Coordinated Time (UTC), to
obtain the moduleTime. It keeps its value even if the card boots.
However, if the node is powered-off for more than 24 hours, it
resets to the default value, which is 0. The specified value should be
in the range -720 (-12 hours) to 720 (+12 hours). Values greater
than 720 are accepted for backward compatibility; for example, 780
(13 hours) corresponds to an offset of -11 hours. If a value greater
than 720 is entered, it will be displayed as a negative offset. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
-720..1440 |
|
| timeMainServer |
1.3.6.1.4.1.562.2.4.1.19.10.1.7 |
| This attribute indicates the IP address of the main network time
server that this module synchronizes with. If syncStatus is
unsynchronized, then mainServer is 0.0.0.0. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| timeXntpVersion |
1.3.6.1.4.1.562.2.4.1.19.10.1.8 |
| This attribute indicates the current protocol version of XNTP
running on this module. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..15 |
|
| timeSyncSourcesTable |
1.3.6.1.4.1.562.2.4.1.19.391 |
| This attribute indicates the IP addresses of the network time servers
that this module synchronizes with. XNTP uses the clock values of
the network time servers to set its moduleTime. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
TimeSyncSourcesEntry |
|
| timeSyncSourcesEntry |
1.3.6.1.4.1.562.2.4.1.19.391.1 |
| An entry in the timeSyncSourcesTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
TimeSyncSourcesEntry |
|
|
| timeSyncSourcesValue |
1.3.6.1.4.1.562.2.4.1.19.391.1.1 |
| This variable represents both the value and the index for the
timeSyncSourcesTable. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| timeServer |
1.3.6.1.4.1.562.2.4.1.19.3 |
| OBJECT IDENTIFIER |
|
|
|
| timeServerRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.19.3.1.1 |
| A single entry in the table represents a single
timeServer component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
TimeServerRowStatusEntry |
|
|
| timeServerRowStatus |
1.3.6.1.4.1.562.2.4.1.19.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
timeServer components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| timeServerComponentName |
1.3.6.1.4.1.562.2.4.1.19.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| timeServerStorageType |
1.3.6.1.4.1.562.2.4.1.19.3.1.1.4 |
| This variable represents the storage type value for the
timeServer tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| timeServerIndex |
1.3.6.1.4.1.562.2.4.1.19.3.1.1.10 |
| This variable represents the index for the timeServer tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..10 |
|
| timeServerProvTable |
1.3.6.1.4.1.562.2.4.1.19.3.11 |
| This group contains the provisionable attributes of the Server
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
TimeServerProvEntry |
|
| timeServerProvEntry |
1.3.6.1.4.1.562.2.4.1.19.3.11.1 |
| An entry in the timeServerProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
TimeServerProvEntry |
|
|
| timeServerIpAddress |
1.3.6.1.4.1.562.2.4.1.19.3.11.1.1 |
| This attribute specifies the IP address of a network time server that
the module will attempt to synchronize with. The value of
ipAddress must be unique across all Server components. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| timeServerIpStack |
1.3.6.1.4.1.562.2.4.1.19.3.11.1.2 |
| This attribute specifies the IP stack that XNTP uses to communi-
cate with the network time server. If ipiFrIpiVc is selected, then an
IpiFr or IpiVc component must be provisioned on this module. If
vrIp is selected, then Ip must be provisioned under the management
Vr on this module. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ipiFrIpiVc(1), vrIp(2) |
|
| timeServerStateTable |
1.3.6.1.4.1.562.2.4.1.19.3.12 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
TimeServerStateEntry |
|
| timeServerStateEntry |
1.3.6.1.4.1.562.2.4.1.19.3.12.1 |
| An entry in the timeServerStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
TimeServerStateEntry |
|
|
| timeServerAdminState |
1.3.6.1.4.1.562.2.4.1.19.3.12.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| timeServerOperationalState |
1.3.6.1.4.1.562.2.4.1.19.3.12.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| timeServerUsageState |
1.3.6.1.4.1.562.2.4.1.19.3.12.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| timeServerOperTable |
1.3.6.1.4.1.562.2.4.1.19.3.13 |
| This group contains the operational attributes of the Server
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
TimeServerOperEntry |
|
| timeServerOperEntry |
1.3.6.1.4.1.562.2.4.1.19.3.13.1 |
| An entry in the timeServerOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
TimeServerOperEntry |
|
|
| timeServerXntpVersion |
1.3.6.1.4.1.562.2.4.1.19.3.13.1.1 |
| This attribute indicates the version of XNTP currently in use by the
network time server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..15 |
|
| timeServerStratum |
1.3.6.1.4.1.562.2.4.1.19.3.13.1.2 |
| This attribute indicates the stratum level of the clock on the network
time server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..16 |
|
| timeServerPoll |
1.3.6.1.4.1.562.2.4.1.19.3.13.1.3 |
| This attribute indicates the time interval for the Passport module to
poll the network time server for time synchronization. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..15 |
|
| timeServerPktSent |
1.3.6.1.4.1.562.2.4.1.19.3.13.1.4 |
| This attribute counts the packets sent to the network time server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| timeServerPktRecv |
1.3.6.1.4.1.562.2.4.1.19.3.13.1.5 |
| This attribute counts the packets received from the network time
server, including the invalid packets. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| timeServerPktValid |
1.3.6.1.4.1.562.2.4.1.19.3.13.1.6 |
| This attribute counts the valid packets received from the network
time server. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| timeServerStatus |
1.3.6.1.4.1.562.2.4.1.19.3.13.1.392 |
| This attribute indicates the status of the network time server.
main -- This network time server is working properly, and is the
system servers (synchronization sources) of the module.
primary -- This network time server is working properly, and is the
primary servers (one of the synchronization sources) of the module
secondary -- This network time server is working properly, but its
offset and dispersion is not stable or too high so that it can not be
selected as one of the primary time synchronization sources. But if
the primary synchronization sources are not available, it can take
over the responsibility and become the time synchronization source
of the module.
unused -- This network time server is not used as a server
(synchronization source) of the module.
noResponse -- This network time server is not responding to the
module's time synchronization request. This could be caused by
network error or protocol error, or network time server
configuration error.
stratumTooHigh -- This network time server has the bad stratum
(higher than 16), or its stratum is higher than the module's stratum.
leapUnsync -- This network time server's leap value indicates that
this network time server is not synchronized.
clockUnsync -- This network time server's clock values indicates
that this network time server is not synchronized.
rootTooNoisy -- This network time server's root dispersion is too
high, so that its time stamp is not used.
peerTooNoisy -- The modules dispersion relative to this network
time server is too high, so this network time server's time stamp is
not used.
faultStick -- This offset of the module relative to this network time
server is out of the range or too high, so that it can not be selected
as one of the primary time synchronization source.
Description of bits:
main(0)
primary(1)
secondary(2)
unused(3)
noResponse(4)
stratumTooHigh(5)
leapUnsync(6)
clockUnsync(7)
rootTooNoisy(8)
peerTooNoisy(9)
faultStick(10) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| nS |
1.3.6.1.4.1.562.2.4.1.20 |
| OBJECT IDENTIFIER |
|
|
|
| nSRowStatusTable |
1.3.6.1.4.1.562.2.4.1.20.1 |
| This entry controls the addition and deletion of
nS components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
NSRowStatusEntry |
|
| nSRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.20.1.1 |
| A single entry in the table represents a single
nS component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NSRowStatusEntry |
|
|
| nSRowStatus |
1.3.6.1.4.1.562.2.4.1.20.1.1.1 |
| This variable is used as the basis for SNMP naming of
nS components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| nSComponentName |
1.3.6.1.4.1.562.2.4.1.20.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| nSStorageType |
1.3.6.1.4.1.562.2.4.1.20.1.1.4 |
| This variable represents the storage type value for the
nS tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| nSIndex |
1.3.6.1.4.1.562.2.4.1.20.1.1.10 |
| This variable represents the index for the nS tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| nSProvTable |
1.3.6.1.4.1.562.2.4.1.20.10 |
| This group contains all of the provisioning data for the
NetworkSynchronization component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
NSProvEntry |
|
| nSProvEntry |
1.3.6.1.4.1.562.2.4.1.20.10.1 |
| An entry in the nSProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NSProvEntry |
|
|
| nSPrimaryReference |
1.3.6.1.4.1.562.2.4.1.20.10.1.1 |
| This component name is the port that is the preferred choice as the
reference for the network clock. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowPointer |
|
|
| nSSecondaryReference |
1.3.6.1.4.1.562.2.4.1.20.10.1.2 |
| This component name is the port that is the second choice for the
reference for the network clock. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowPointer |
|
|
| nSTertiaryReference |
1.3.6.1.4.1.562.2.4.1.20.10.1.3 |
| This component name is the port that is the third choice for the
reference for the network clock. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowPointer |
|
|
| nSStateTable |
1.3.6.1.4.1.562.2.4.1.20.11 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
NSStateEntry |
|
| nSStateEntry |
1.3.6.1.4.1.562.2.4.1.20.11.1 |
| An entry in the nSStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NSStateEntry |
|
|
| nSAdminState |
1.3.6.1.4.1.562.2.4.1.20.11.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| nSOperationalState |
1.3.6.1.4.1.562.2.4.1.20.11.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| nSUsageState |
1.3.6.1.4.1.562.2.4.1.20.11.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| nSOperTable |
1.3.6.1.4.1.562.2.4.1.20.12 |
| This group contains the operational attributes for the network clock
sync |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
NSOperEntry |
|
| nSOperEntry |
1.3.6.1.4.1.562.2.4.1.20.12.1 |
| An entry in the nSOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NSOperEntry |
|
|
| nSClockSyncState |
1.3.6.1.4.1.562.2.4.1.20.12.1.1 |
| When the clockSyncState is in the freeRun state, either no
reference have beed provisioned or none of the provisioned
references have been found to be valid. The Stratum-3 clock is
allowed to run freely at its last adjusted frequency. When the
clockSyncState is in the synchronizing state, the Stratum-3 is
trying to synchronize in frequency to a valid provisioned reference.
This state should last approximately 1-2 minutes, provided the
reference is stable. Once frequency synchronization is acheived, a
null phase is acquired and the clockSyncState enters the
synchronized state. In this state, both phase and frequency are
tracked and compensated for. This node is now ready to support
transparent data services. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
freeRun(0), synchronizing(1), synchronized(3) |
|
| nSActiveReference |
1.3.6.1.4.1.562.2.4.1.20.12.1.2 |
| Indicates the active 8Khz clock reference source |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowPointer |
|
|
| nSStandbyReference |
1.3.6.1.4.1.562.2.4.1.20.12.1.3 |
| Indicates the standby 8Khz clock reference source which will be
selected if a failure is detected on the active source. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowPointer |
|
|
| timeGroup |
1.3.6.1.4.1.562.2.4.2.13.1 |
| OBJECT IDENTIFIER |
|
|
|
| timeGroupBE |
1.3.6.1.4.1.562.2.4.2.13.1.5 |
| OBJECT IDENTIFIER |
|
|
|