Nortel-Magellan-Passport-ModAtmQosMIB

File: Nortel-Magellan-Passport-ModAtmQosMIB.mib (14018 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-ModCommonMIB Nortel-Magellan-Passport-ShelfMIB

Imported symbols

OBJECT-TYPE passportMIBs DisplayString
StorageType RowStatus Integer32
Unsigned32 NonReplicated modFrsIndex
modFrs modIndex

Defined Types

ModFrsAtmNetRowStatusEntry  
SEQUENCE    
  modFrsAtmNetRowStatus RowStatus
  modFrsAtmNetComponentName DisplayString
  modFrsAtmNetStorageType StorageType
  modFrsAtmNetIndex NonReplicated

ModFrsAtmNetProvEntry  
SEQUENCE    
  modFrsAtmNetRetryTimerPeriod Unsigned32

ModFrsAtmNetTpmRowStatusEntry  
SEQUENCE    
  modFrsAtmNetTpmRowStatus RowStatus
  modFrsAtmNetTpmComponentName DisplayString
  modFrsAtmNetTpmStorageType StorageType
  modFrsAtmNetTpmIndex Integer32

ModFrsAtmNetTpmProvEntry  
SEQUENCE    
  modFrsAtmNetTpmEmissionPriority Unsigned32
  modFrsAtmNetTpmAtmServiceCategory INTEGER
  modFrsAtmNetTpmAvgFrameSize Unsigned32
  modFrsAtmNetTpmTrafficParmConversionPolicy INTEGER
  modFrsAtmNetTpmAssignedBandwidthPool INTEGER

Defined Values

modAtmQosMIB 1.3.6.1.4.1.562.2.4.2.75
OBJECT IDENTIFIER    

modFrsAtmNet 1.3.6.1.4.1.562.2.4.1.16.3.2
OBJECT IDENTIFIER    

modFrsAtmNetRowStatusTable 1.3.6.1.4.1.562.2.4.1.16.3.2.1
This entry controls the addition and deletion of modFrsAtmNet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModFrsAtmNetRowStatusEntry

modFrsAtmNetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1
A single entry in the table represents a single modFrsAtmNet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ModFrsAtmNetRowStatusEntry  

modFrsAtmNetRowStatus 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1.1
This variable is used as the basis for SNMP naming of modFrsAtmNet components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

modFrsAtmNetComponentName 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

modFrsAtmNetStorageType 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1.4
This variable represents the storage type value for the modFrsAtmNet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

modFrsAtmNetIndex 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1.10
This variable represents the index for the modFrsAtmNet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

modFrsAtmNetProvTable 1.3.6.1.4.1.562.2.4.1.16.3.2.10
This group contains information related to the Frame Relay to ATM interworking.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModFrsAtmNetProvEntry

modFrsAtmNetProvEntry 1.3.6.1.4.1.562.2.4.1.16.3.2.10.1
An entry in the modFrsAtmNetProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ModFrsAtmNetProvEntry  

modFrsAtmNetRetryTimerPeriod 1.3.6.1.4.1.562.2.4.1.16.3.2.10.1.1
This attribute specifies the module wide retry timer interval for failed SPVC calls using Frame Relay to ATM Networking. Changes to this attribute will take effect on subsequent call setups.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 30..300  

modFrsAtmNetTpm 1.3.6.1.4.1.562.2.4.1.16.3.2.2
OBJECT IDENTIFIER    

modFrsAtmNetTpmRowStatusTable 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1
This entry controls the addition and deletion of modFrsAtmNetTpm components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModFrsAtmNetTpmRowStatusEntry

modFrsAtmNetTpmRowStatusEntry 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1
A single entry in the table represents a single modFrsAtmNetTpm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ModFrsAtmNetTpmRowStatusEntry  

modFrsAtmNetTpmRowStatus 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of modFrsAtmNetTpm components. These components can be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

modFrsAtmNetTpmComponentName 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

modFrsAtmNetTpmStorageType 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1.4
This variable represents the storage type value for the modFrsAtmNetTpm tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

modFrsAtmNetTpmIndex 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1.10
This variable represents the index for the modFrsAtmNetTpm tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

modFrsAtmNetTpmProvTable 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2
This group specifies the mapping from Frame Relay parameters to ATM parameters for a Frame Relay using the defined transfer priority.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModFrsAtmNetTpmProvEntry

modFrsAtmNetTpmProvEntry 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1
An entry in the modFrsAtmNetTpmProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ModFrsAtmNetTpmProvEntry  

modFrsAtmNetTpmEmissionPriority 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.1
This attribute specifies the egress emission priority at the FR to ATM interface. A value of 3 specifies the highest priority, whereas a value of 0 specifies the lowest priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

modFrsAtmNetTpmAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.2
This attribute specifies the ATM class of service value to be used on a transport connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ubr(0), cbr(1), rtVbr(2), nrtVbr(3)  

modFrsAtmNetTpmAvgFrameSize 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.3
This attribute specifies the average frame size that is used in the traffic parameter conversion policy calculations for this transfer priority to determine the overhead factor for FR to ATM interworking. The overhead factor affects the granularity of the bandwidth requirements. The values should be identical across the network. Otherwise, there may result in bandwidth conversion inconsistencies.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8187  

modFrsAtmNetTpmTrafficParmConversionPolicy 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.4
This attribute specifies the traffic parameter conversion policy to use for this transfer priority to specify the equivalent bandwidth rate at the FrAtm interface. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected - PCR0+1 is based on the AR - SCR0+1 is based on the CIR and EIR - MBS0+1 is based on Bc,Be,CIR,EIR and AR - Takes into account that the instananeous rate of the frame relay stream can burst above CIR and up tp the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR0+1 is based on the AR - SCR0 is based on the CIR - MBS0 is based on Bc,CIR and AR - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer - PCR0+1 is based on CIR and EIR - SCR0 is based on the CIR - MBS0 is based on the Bc,CIR and AR - The maximum PCR is no longer based on AR but based on the CIR and EIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected - PCR0+1 is based only on CIR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n4(4), n5(5), n6(6)  

modFrsAtmNetTpmAssignedBandwidthPool 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.5
This attribute specifies the bandwidth pool which is used to support this transfer priority. The bandwidth pool is defined in the frAtm Ca component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15)  

modAtmQosGroup 1.3.6.1.4.1.562.2.4.2.75.1
OBJECT IDENTIFIER    

modAtmQosGroupBE 1.3.6.1.4.1.562.2.4.2.75.1.5
OBJECT IDENTIFIER    

modAtmQosGroupBE01 1.3.6.1.4.1.562.2.4.2.75.1.5.2
OBJECT IDENTIFIER    

modAtmQosGroupBE01A 1.3.6.1.4.1.562.2.4.2.75.1.5.2.2
OBJECT IDENTIFIER    

modAtmQosCapabilities 1.3.6.1.4.1.562.2.4.2.75.3
OBJECT IDENTIFIER    

modAtmQosCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.75.3.5
OBJECT IDENTIFIER    

modAtmQosCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.75.3.5.2
OBJECT IDENTIFIER    

modAtmQosCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.75.3.5.2.2
OBJECT IDENTIFIER