Nortel-Magellan-Passport-MgmtInterfacesMIB

File: Nortel-Magellan-Passport-MgmtInterfacesMIB.mib (77685 bytes)

Imported modules

RFC-1212 RFC1155-SMI Nortel-Magellan-Passport-UsefulDefinitionsMIB
Nortel-Magellan-Passport-StandardTextualConventionsMIB Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE IpAddress components
passportMIBs RowPointer DisplayString
StorageType RowStatus Integer32
Unsigned32 AsciiString NonReplicated
AsciiStringIndex

Defined Types

NmisRowStatusEntry  
SEQUENCE    
  nmisRowStatus RowStatus
  nmisComponentName DisplayString
  nmisStorageType StorageType
  nmisIndex NonReplicated

NmisLocalRowStatusEntry  
SEQUENCE    
  nmisLocalRowStatus RowStatus
  nmisLocalComponentName DisplayString
  nmisLocalStorageType StorageType
  nmisLocalIndex NonReplicated

NmisLocalStateEntry  
SEQUENCE    
  nmisLocalAdminState INTEGER
  nmisLocalOperationalState INTEGER
  nmisLocalUsageState INTEGER

NmisLocalOperEntry  
SEQUENCE    
  nmisLocalMaxAllowedSessions Unsigned32
  nmisLocalActiveSessions Unsigned32

NmisLocalSessionRowStatusEntry  
SEQUENCE    
  nmisLocalSessionRowStatus RowStatus
  nmisLocalSessionComponentName DisplayString
  nmisLocalSessionStorageType StorageType
  nmisLocalSessionIndex Integer32

NmisLocalSessionOperEntry  
SEQUENCE    
  nmisLocalSessionUserid AsciiString
  nmisLocalSessionDataStreams OCTET STRING
  nmisLocalSessionHostCard RowPointer
  nmisLocalSessionScreenWidth Unsigned32

NmisTelnetRowStatusEntry  
SEQUENCE    
  nmisTelnetRowStatus RowStatus
  nmisTelnetComponentName DisplayString
  nmisTelnetStorageType StorageType
  nmisTelnetIndex NonReplicated

NmisTelnetStateEntry  
SEQUENCE    
  nmisTelnetAdminState INTEGER
  nmisTelnetOperationalState INTEGER
  nmisTelnetUsageState INTEGER

NmisTelnetOperEntry  
SEQUENCE    
  nmisTelnetMaxAllowedSessions Unsigned32
  nmisTelnetActiveSessions Unsigned32

NmisTelnetSessionRowStatusEntry  
SEQUENCE    
  nmisTelnetSessionRowStatus RowStatus
  nmisTelnetSessionComponentName DisplayString
  nmisTelnetSessionStorageType StorageType
  nmisTelnetSessionIndex Integer32

NmisTelnetSessionOperEntry  
SEQUENCE    
  nmisTelnetSessionUserid AsciiString
  nmisTelnetSessionDataStreams OCTET STRING
  nmisTelnetSessionRemoteIpAddr IpAddress
  nmisTelnetSessionRemoteTcpPort Unsigned32
  nmisTelnetSessionScreenWidth Unsigned32

NmisTelnetSessionClientRowStatusEntry  
SEQUENCE    
  nmisTelnetSessionClientRowStatus RowStatus
  nmisTelnetSessionClientComponentName DisplayString
  nmisTelnetSessionClientStorageType StorageType
  nmisTelnetSessionClientIndex NonReplicated

NmisTelnetSessionClientOperEntry  
SEQUENCE    
  nmisTelnetSessionClientVirtualRouter RowPointer
  nmisTelnetSessionClientRemoteIpAddr IpAddress
  nmisTelnetSessionClientRemoteTcpPort Unsigned32

NmisFmipRowStatusEntry  
SEQUENCE    
  nmisFmipRowStatus RowStatus
  nmisFmipComponentName DisplayString
  nmisFmipStorageType StorageType
  nmisFmipIndex NonReplicated

NmisFmipStateEntry  
SEQUENCE    
  nmisFmipAdminState INTEGER
  nmisFmipOperationalState INTEGER
  nmisFmipUsageState INTEGER

NmisFmipOperEntry  
SEQUENCE    
  nmisFmipMaxAllowedSessions Unsigned32
  nmisFmipActiveSessions Unsigned32

NmisFmipSessionRowStatusEntry  
SEQUENCE    
  nmisFmipSessionRowStatus RowStatus
  nmisFmipSessionComponentName DisplayString
  nmisFmipSessionStorageType StorageType
  nmisFmipSessionIndex Integer32

NmisFmipSessionOperEntry  
SEQUENCE    
  nmisFmipSessionUserid AsciiString
  nmisFmipSessionDataStreams OCTET STRING
  nmisFmipSessionRemoteIpAddr IpAddress
  nmisFmipSessionRemoteTcpPort Unsigned32
  nmisFmipSessionScreenWidth Unsigned32

NmisFtpRowStatusEntry  
SEQUENCE    
  nmisFtpRowStatus RowStatus
  nmisFtpComponentName DisplayString
  nmisFtpStorageType StorageType
  nmisFtpIndex NonReplicated

NmisFtpStateEntry  
SEQUENCE    
  nmisFtpAdminState INTEGER
  nmisFtpOperationalState INTEGER
  nmisFtpUsageState INTEGER

NmisFtpOperEntry  
SEQUENCE    
  nmisFtpMaxAllowedSessions Unsigned32
  nmisFtpActiveSessions Unsigned32

NmisFtpSessionRowStatusEntry  
SEQUENCE    
  nmisFtpSessionRowStatus RowStatus
  nmisFtpSessionComponentName DisplayString
  nmisFtpSessionStorageType StorageType
  nmisFtpSessionIndex Integer32

NmisFtpSessionOperEntry  
SEQUENCE    
  nmisFtpSessionUserid AsciiString
  nmisFtpSessionRemoteIpAddr IpAddress
  nmisFtpSessionRemoteTcpPort Unsigned32

AcRowStatusEntry  
SEQUENCE    
  acRowStatus RowStatus
  acComponentName DisplayString
  acStorageType StorageType
  acIndex NonReplicated

AcProvEntry  
SEQUENCE    
  acPublicKeyAuth OCTET STRING

AcUseridRowStatusEntry  
SEQUENCE    
  acUseridRowStatus RowStatus
  acUseridComponentName DisplayString
  acUseridStorageType StorageType
  acUseridIndex AsciiStringIndex

AcUseridProvEntry  
SEQUENCE    
  acUseridPassword AsciiString
  acUseridCustomerIdentifier Unsigned32
  acUseridCommandScope INTEGER
  acUseridCommandImpact INTEGER
  acUseridAllowedAccess OCTET STRING
  acUseridLoginDirectory AsciiString
  acUseridAllowedOutAccess OCTET STRING

AcIpAccessRowStatusEntry  
SEQUENCE    
  acIpAccessRowStatus RowStatus
  acIpAccessComponentName DisplayString
  acIpAccessStorageType StorageType
  acIpAccessIndex IpAddress

AcIpAccessProvEntry  
SEQUENCE    
  acIpAccessIpAddressMask IpAddress

Defined Values

mgmtInterfacesMIB 1.3.6.1.4.1.562.2.4.2.15
OBJECT IDENTIFIER    

nmis 1.3.6.1.4.1.562.2.4.1.17
OBJECT IDENTIFIER    

nmisRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.1
This entry controls the addition and deletion of nmis components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisRowStatusEntry

nmisRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.1.1
A single entry in the table represents a single nmis component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisRowStatusEntry  

nmisRowStatus 1.3.6.1.4.1.562.2.4.1.17.1.1.1
This variable is used as the basis for SNMP naming of nmis components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisComponentName 1.3.6.1.4.1.562.2.4.1.17.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisStorageType 1.3.6.1.4.1.562.2.4.1.17.1.1.4
This variable represents the storage type value for the nmis tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisIndex 1.3.6.1.4.1.562.2.4.1.17.1.1.10
This variable represents the index for the nmis tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

nmisLocal 1.3.6.1.4.1.562.2.4.1.17.2
OBJECT IDENTIFIER    

nmisLocalRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.2.1
This entry controls the addition and deletion of nmisLocal components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisLocalRowStatusEntry

nmisLocalRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.2.1.1
A single entry in the table represents a single nmisLocal component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisLocalRowStatusEntry  

nmisLocalRowStatus 1.3.6.1.4.1.562.2.4.1.17.2.1.1.1
This variable is used as the basis for SNMP naming of nmisLocal components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisLocalComponentName 1.3.6.1.4.1.562.2.4.1.17.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisLocalStorageType 1.3.6.1.4.1.562.2.4.1.17.2.1.1.4
This variable represents the storage type value for the nmisLocal tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisLocalIndex 1.3.6.1.4.1.562.2.4.1.17.2.1.1.10
This variable represents the index for the nmisLocal tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

nmisLocalStateTable 1.3.6.1.4.1.562.2.4.1.17.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisLocalStateEntry

nmisLocalStateEntry 1.3.6.1.4.1.562.2.4.1.17.2.10.1
An entry in the nmisLocalStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisLocalStateEntry  

nmisLocalAdminState 1.3.6.1.4.1.562.2.4.1.17.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

nmisLocalOperationalState 1.3.6.1.4.1.562.2.4.1.17.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

nmisLocalUsageState 1.3.6.1.4.1.562.2.4.1.17.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

nmisLocalOperTable 1.3.6.1.4.1.562.2.4.1.17.2.11
This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisLocalOperEntry

nmisLocalOperEntry 1.3.6.1.4.1.562.2.4.1.17.2.11.1
An entry in the nmisLocalOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisLocalOperEntry  

nmisLocalMaxAllowedSessions 1.3.6.1.4.1.562.2.4.1.17.2.11.1.1
This attribute indicates the maximum number of simultaneous sessions the manager will allow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 2..35  

nmisLocalActiveSessions 1.3.6.1.4.1.562.2.4.1.17.2.11.1.2
This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..35  

nmisLocalSession 1.3.6.1.4.1.562.2.4.1.17.2.2
OBJECT IDENTIFIER    

nmisLocalSessionRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.2.2.1
This entry controls the addition and deletion of nmisLocalSession components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisLocalSessionRowStatusEntry

nmisLocalSessionRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1
A single entry in the table represents a single nmisLocalSession component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisLocalSessionRowStatusEntry  

nmisLocalSessionRowStatus 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.1
This variable is used as the basis for SNMP naming of nmisLocalSession components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisLocalSessionComponentName 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisLocalSessionStorageType 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.4
This variable represents the storage type value for the nmisLocalSession tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisLocalSessionIndex 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.10
This variable represents the index for the nmisLocalSession tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2  

nmisLocalSessionOperTable 1.3.6.1.4.1.562.2.4.1.17.2.2.10
This group contains the operational attributes for a Local session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisLocalSessionOperEntry

nmisLocalSessionOperEntry 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1
An entry in the nmisLocalSessionOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisLocalSessionOperEntry  

nmisLocalSessionUserid 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.1
This attribute indicates the Userid logged in to the Session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(8)  

nmisLocalSessionDataStreams 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.2
This attribute indicates which data streams will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

nmisLocalSessionHostCard 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.3
This attribute holds the component name of the host control processor Card servicing the local operator session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

nmisLocalSessionScreenWidth 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.4
This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 79..2000  

nmisTelnet 1.3.6.1.4.1.562.2.4.1.17.3
OBJECT IDENTIFIER    

nmisTelnetRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.3.1
This entry controls the addition and deletion of nmisTelnet components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisTelnetRowStatusEntry

nmisTelnetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.3.1.1
A single entry in the table represents a single nmisTelnet component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisTelnetRowStatusEntry  

nmisTelnetRowStatus 1.3.6.1.4.1.562.2.4.1.17.3.1.1.1
This variable is used as the basis for SNMP naming of nmisTelnet components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisTelnetComponentName 1.3.6.1.4.1.562.2.4.1.17.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisTelnetStorageType 1.3.6.1.4.1.562.2.4.1.17.3.1.1.4
This variable represents the storage type value for the nmisTelnet tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisTelnetIndex 1.3.6.1.4.1.562.2.4.1.17.3.1.1.10
This variable represents the index for the nmisTelnet tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

nmisTelnetStateTable 1.3.6.1.4.1.562.2.4.1.17.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisTelnetStateEntry

nmisTelnetStateEntry 1.3.6.1.4.1.562.2.4.1.17.3.10.1
An entry in the nmisTelnetStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisTelnetStateEntry  

nmisTelnetAdminState 1.3.6.1.4.1.562.2.4.1.17.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

nmisTelnetOperationalState 1.3.6.1.4.1.562.2.4.1.17.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

nmisTelnetUsageState 1.3.6.1.4.1.562.2.4.1.17.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

nmisTelnetOperTable 1.3.6.1.4.1.562.2.4.1.17.3.11
This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisTelnetOperEntry

nmisTelnetOperEntry 1.3.6.1.4.1.562.2.4.1.17.3.11.1
An entry in the nmisTelnetOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisTelnetOperEntry  

nmisTelnetMaxAllowedSessions 1.3.6.1.4.1.562.2.4.1.17.3.11.1.1
This attribute indicates the maximum number of simultaneous sessions the manager will allow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 2..35  

nmisTelnetActiveSessions 1.3.6.1.4.1.562.2.4.1.17.3.11.1.2
This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..35  

nmisTelnetSession 1.3.6.1.4.1.562.2.4.1.17.3.2
OBJECT IDENTIFIER    

nmisTelnetSessionRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.3.2.1
This entry controls the addition and deletion of nmisTelnetSession components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisTelnetSessionRowStatusEntry

nmisTelnetSessionRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1
A single entry in the table represents a single nmisTelnetSession component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisTelnetSessionRowStatusEntry  

nmisTelnetSessionRowStatus 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.1
This variable is used as the basis for SNMP naming of nmisTelnetSession components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisTelnetSessionComponentName 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisTelnetSessionStorageType 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.4
This variable represents the storage type value for the nmisTelnetSession tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisTelnetSessionIndex 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.10
This variable represents the index for the nmisTelnetSession tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

nmisTelnetSessionOperTable 1.3.6.1.4.1.562.2.4.1.17.3.2.10
This group contains the operational attributes for a Telnet session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisTelnetSessionOperEntry

nmisTelnetSessionOperEntry 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1
An entry in the nmisTelnetSessionOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisTelnetSessionOperEntry  

nmisTelnetSessionUserid 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.1
This attribute indicates the userid logged in to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(8)  

nmisTelnetSessionDataStreams 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.2
This attribute indicates which data streams (alarm, debug, log, scn) will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. When a client connection is up through this interface, all of the values are turned off. This means that this data is discarded when the session has a Telnet client connection set up. When the client connection terminates, the data which was being received prior to the client being set up is requested again. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

nmisTelnetSessionRemoteIpAddr 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.3
This attribute indicates the IP address of the remote device connected to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

nmisTelnetSessionRemoteTcpPort 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.4
This attribute indicates the TCP port number of the Telnet client being used on the remote device connected to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

nmisTelnetSessionScreenWidth 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.5
This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 79..2000  

nmisTelnetSessionClient 1.3.6.1.4.1.562.2.4.1.17.3.2.2
OBJECT IDENTIFIER    

nmisTelnetSessionClientRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1
This entry controls the addition and deletion of nmisTelnetSessionClient components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisTelnetSessionClientRowStatusEntry

nmisTelnetSessionClientRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1
A single entry in the table represents a single nmisTelnetSessionClient component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisTelnetSessionClientRowStatusEntry  

nmisTelnetSessionClientRowStatus 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of nmisTelnetSessionClient components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisTelnetSessionClientComponentName 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisTelnetSessionClientStorageType 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.4
This variable represents the storage type value for the nmisTelnetSessionClient tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisTelnetSessionClientIndex 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.10
This variable represents the index for the nmisTelnetSessionClient tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

nmisTelnetSessionClientOperTable 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10
This group contains the operational attributes for a Telnet client.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisTelnetSessionClientOperEntry

nmisTelnetSessionClientOperEntry 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1
An entry in the nmisTelnetSessionClientOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisTelnetSessionClientOperEntry  

nmisTelnetSessionClientVirtualRouter 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.1
This attribute indicates the VR instance that determines which address space the remoteIpAddr belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

nmisTelnetSessionClientRemoteIpAddr 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.2
This attribute indicates the IP address of the remote side of the client connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

nmisTelnetSessionClientRemoteTcpPort 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.3
This attribute indicates the TCP port number of the remote side of the client connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

nmisFmip 1.3.6.1.4.1.562.2.4.1.17.4
OBJECT IDENTIFIER    

nmisFmipRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.4.1
This entry controls the addition and deletion of nmisFmip components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFmipRowStatusEntry

nmisFmipRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.4.1.1
A single entry in the table represents a single nmisFmip component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFmipRowStatusEntry  

nmisFmipRowStatus 1.3.6.1.4.1.562.2.4.1.17.4.1.1.1
This variable is used as the basis for SNMP naming of nmisFmip components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisFmipComponentName 1.3.6.1.4.1.562.2.4.1.17.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisFmipStorageType 1.3.6.1.4.1.562.2.4.1.17.4.1.1.4
This variable represents the storage type value for the nmisFmip tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisFmipIndex 1.3.6.1.4.1.562.2.4.1.17.4.1.1.10
This variable represents the index for the nmisFmip tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

nmisFmipStateTable 1.3.6.1.4.1.562.2.4.1.17.4.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFmipStateEntry

nmisFmipStateEntry 1.3.6.1.4.1.562.2.4.1.17.4.10.1
An entry in the nmisFmipStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFmipStateEntry  

nmisFmipAdminState 1.3.6.1.4.1.562.2.4.1.17.4.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

nmisFmipOperationalState 1.3.6.1.4.1.562.2.4.1.17.4.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

nmisFmipUsageState 1.3.6.1.4.1.562.2.4.1.17.4.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

nmisFmipOperTable 1.3.6.1.4.1.562.2.4.1.17.4.11
This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFmipOperEntry

nmisFmipOperEntry 1.3.6.1.4.1.562.2.4.1.17.4.11.1
An entry in the nmisFmipOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFmipOperEntry  

nmisFmipMaxAllowedSessions 1.3.6.1.4.1.562.2.4.1.17.4.11.1.1
This attribute indicates the maximum number of simultaneous sessions the manager will allow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 2..35  

nmisFmipActiveSessions 1.3.6.1.4.1.562.2.4.1.17.4.11.1.2
This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..35  

nmisFmipSession 1.3.6.1.4.1.562.2.4.1.17.4.2
OBJECT IDENTIFIER    

nmisFmipSessionRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.4.2.1
This entry controls the addition and deletion of nmisFmipSession components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFmipSessionRowStatusEntry

nmisFmipSessionRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1
A single entry in the table represents a single nmisFmipSession component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFmipSessionRowStatusEntry  

nmisFmipSessionRowStatus 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.1
This variable is used as the basis for SNMP naming of nmisFmipSession components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisFmipSessionComponentName 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisFmipSessionStorageType 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.4
This variable represents the storage type value for the nmisFmipSession tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisFmipSessionIndex 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.10
This variable represents the index for the nmisFmipSession tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..35  

nmisFmipSessionOperTable 1.3.6.1.4.1.562.2.4.1.17.4.2.10
This group contains the operational attributes for an FMIP session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFmipSessionOperEntry

nmisFmipSessionOperEntry 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1
An entry in the nmisFmipSessionOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFmipSessionOperEntry  

nmisFmipSessionUserid 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.1
This attribute indicates the userid logged in to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(8)  

nmisFmipSessionDataStreams 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.2
This attribute indicates which data streams will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

nmisFmipSessionRemoteIpAddr 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.3
This attribute indicates the IP address of the remote device connected to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

nmisFmipSessionRemoteTcpPort 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.4
This attribute indicates the TCP port number of the FMIP client being used on the remote device connected to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

nmisFmipSessionScreenWidth 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.5
This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 79..2000  

nmisFtp 1.3.6.1.4.1.562.2.4.1.17.5
OBJECT IDENTIFIER    

nmisFtpRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.5.1
This entry controls the addition and deletion of nmisFtp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFtpRowStatusEntry

nmisFtpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.5.1.1
A single entry in the table represents a single nmisFtp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFtpRowStatusEntry  

nmisFtpRowStatus 1.3.6.1.4.1.562.2.4.1.17.5.1.1.1
This variable is used as the basis for SNMP naming of nmisFtp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisFtpComponentName 1.3.6.1.4.1.562.2.4.1.17.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisFtpStorageType 1.3.6.1.4.1.562.2.4.1.17.5.1.1.4
This variable represents the storage type value for the nmisFtp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisFtpIndex 1.3.6.1.4.1.562.2.4.1.17.5.1.1.10
This variable represents the index for the nmisFtp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

nmisFtpStateTable 1.3.6.1.4.1.562.2.4.1.17.5.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFtpStateEntry

nmisFtpStateEntry 1.3.6.1.4.1.562.2.4.1.17.5.10.1
An entry in the nmisFtpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFtpStateEntry  

nmisFtpAdminState 1.3.6.1.4.1.562.2.4.1.17.5.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

nmisFtpOperationalState 1.3.6.1.4.1.562.2.4.1.17.5.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

nmisFtpUsageState 1.3.6.1.4.1.562.2.4.1.17.5.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

nmisFtpOperTable 1.3.6.1.4.1.562.2.4.1.17.5.11
This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFtpOperEntry

nmisFtpOperEntry 1.3.6.1.4.1.562.2.4.1.17.5.11.1
An entry in the nmisFtpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFtpOperEntry  

nmisFtpMaxAllowedSessions 1.3.6.1.4.1.562.2.4.1.17.5.11.1.1
This attribute indicates the maximum number of simultaneous sessions the manager will allow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 2..35  

nmisFtpActiveSessions 1.3.6.1.4.1.562.2.4.1.17.5.11.1.2
This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..35  

nmisFtpSession 1.3.6.1.4.1.562.2.4.1.17.5.2
OBJECT IDENTIFIER    

nmisFtpSessionRowStatusTable 1.3.6.1.4.1.562.2.4.1.17.5.2.1
This entry controls the addition and deletion of nmisFtpSession components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFtpSessionRowStatusEntry

nmisFtpSessionRowStatusEntry 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1
A single entry in the table represents a single nmisFtpSession component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFtpSessionRowStatusEntry  

nmisFtpSessionRowStatus 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.1
This variable is used as the basis for SNMP naming of nmisFtpSession components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

nmisFtpSessionComponentName 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nmisFtpSessionStorageType 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.4
This variable represents the storage type value for the nmisFtpSession tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

nmisFtpSessionIndex 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.10
This variable represents the index for the nmisFtpSession tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16  

nmisFtpSessionOperTable 1.3.6.1.4.1.562.2.4.1.17.5.2.10
This group contains the operational attributes for an FTP session.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NmisFtpSessionOperEntry

nmisFtpSessionOperEntry 1.3.6.1.4.1.562.2.4.1.17.5.2.10.1
An entry in the nmisFtpSessionOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NmisFtpSessionOperEntry  

nmisFtpSessionUserid 1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.1
This attribute indicates the userid logged in to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(8)  

nmisFtpSessionRemoteIpAddr 1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.2
This attribute indicates the IP address of the remote device connected to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

nmisFtpSessionRemoteTcpPort 1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.3
This attribute indicates the TCP port number of the FTP control connection being used on the remote device connected to the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

ac 1.3.6.1.4.1.562.2.4.1.18
OBJECT IDENTIFIER    

acRowStatusTable 1.3.6.1.4.1.562.2.4.1.18.1
This entry controls the addition and deletion of ac components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcRowStatusEntry

acRowStatusEntry 1.3.6.1.4.1.562.2.4.1.18.1.1
A single entry in the table represents a single ac component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AcRowStatusEntry  

acRowStatus 1.3.6.1.4.1.562.2.4.1.18.1.1.1
This variable is used as the basis for SNMP naming of ac components. These components can be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

acComponentName 1.3.6.1.4.1.562.2.4.1.18.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

acStorageType 1.3.6.1.4.1.562.2.4.1.18.1.1.4
This variable represents the storage type value for the ac tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

acIndex 1.3.6.1.4.1.562.2.4.1.18.1.1.10
This variable represents the index for the ac tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

acProvTable 1.3.6.1.4.1.562.2.4.1.18.10
This group contains the provisionable attributes which apply to the overall access of the the node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcProvEntry

acProvEntry 1.3.6.1.4.1.562.2.4.1.18.10.1
An entry in the acProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AcProvEntry  

acPublicKeyAuth 1.3.6.1.4.1.562.2.4.1.18.10.1.1
This attribute indicates whether Telnet sessions require a public key exchange in order to log in to the node. FMIP sessions always require a public key exchange for login authentication. Description of bits: telnet(0)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

acUserid 1.3.6.1.4.1.562.2.4.1.18.2
OBJECT IDENTIFIER    

acUseridRowStatusTable 1.3.6.1.4.1.562.2.4.1.18.2.1
This entry controls the addition and deletion of acUserid components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcUseridRowStatusEntry

acUseridRowStatusEntry 1.3.6.1.4.1.562.2.4.1.18.2.1.1
A single entry in the table represents a single acUserid component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AcUseridRowStatusEntry  

acUseridRowStatus 1.3.6.1.4.1.562.2.4.1.18.2.1.1.1
This variable is used as the basis for SNMP naming of acUserid components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

acUseridComponentName 1.3.6.1.4.1.562.2.4.1.18.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

acUseridStorageType 1.3.6.1.4.1.562.2.4.1.18.2.1.1.4
This variable represents the storage type value for the acUserid tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

acUseridIndex 1.3.6.1.4.1.562.2.4.1.18.2.1.1.10
This variable represents the index for the acUserid tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..8)  

acUseridProvTable 1.3.6.1.4.1.562.2.4.1.18.2.10
This group contains the provisionable attributes for a userid.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcUseridProvEntry

acUseridProvEntry 1.3.6.1.4.1.562.2.4.1.18.2.10.1
An entry in the acUseridProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AcUseridProvEntry  

acUseridPassword 1.3.6.1.4.1.562.2.4.1.18.2.10.1.1
This attribute holds the password for the userid. This is a write-only attribute to provide additional security for passwords. The password string consists of 5-8 characters, which may be any printable ASCII characters. If the password string includes any non-alphanumeric character, such as $ or *, the entire string must be enclosed in double quotes. Letters in the password string are case-sensitive.
Status: mandatory Access: write-only
OBJECT-TYPE    
  AsciiString Size(5..8)  

acUseridCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.18.2.10.1.2
This attribute indicates the Customer Identifier (CID) assigned to the userid. The CID is used in Customer Network Management (CNM). A CNM operator may only send commands to components provisioned with the same CID as the operator. A CNM operator will only receive event data, such as alarms, which is generated by components provisioned with the same CID as the operator. The special CID of 0 is reserved for the network owner, known as the Netman. The Passport CID attribute is compatible with DPN-100 Netman and Basic CIDs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..8191  

acUseridCommandScope 1.3.6.1.4.1.562.2.4.1.18.2.10.1.3
This attribute indicates the command scope assigned to the userid. The scope determines the importance of the components on which the userid will be allowed to execute commands. Scope has three levels: 1) Network scope implies the userid can manage components that affect the operation of the entire network, such as trunks. 2) Device scope implies the userid can manage components that affect the operation of the entire Passport module, such as processors or the file system. 3) Application scope implies the userid can manage components that affect the operation of a single application. Note that scope is hierarchical: A userid provisioned with network scope can also manage components with a scope of device or application.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(1), device(2), application(3)  

acUseridCommandImpact 1.3.6.1.4.1.562.2.4.1.18.2.10.1.4
This attribute indicates the command impact assigned to the userid. The impact determines the importance of the commands which the userid will be allowed to execute. Impact has five levels: 1) Debug impact implies the userid can issue all debugging commands. Debug is the highest impact level. 2) System Administration impact implies the userid can issue provisioning commands on security components. This means the userid can Add, Delete, Display, or Set the Userid and IpAccess subcomponents of AccessControl. 3) Configuration impact implies the userid can issue provisioning commands to alter the provisioned configuration of the Passport module, such as Start Prov, Add, Delete, and Set. 4) Service impact implies the userid can issue operational commands which may affect the service of running components, such as Lock and Unlock. 5) Passive impact implies the userid can only issue query commands which display unrestricted information but otherwise do not affect the operation or configuration of the Passport module. Commands such as List and Display. Passive is the lowest impact level. Note that impact is hierarchical: A userid provisioned with debug impact can also issue all other commands at lower impact levels.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER debug(3), systemAdministration(4), configuration(5), service(6), passive(7)  

acUseridAllowedAccess 1.3.6.1.4.1.562.2.4.1.18.2.10.1.5
This attribute indicates the set of network management interfaces through which the userid will be allowed incoming access to the Passport. The allowedAccess attribute can be used to restrict a userid to a desired subset of the network management interfaces provided. Description of bits: local(0) telnet(1) fmip(2) ftp(3)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

acUseridLoginDirectory 1.3.6.1.4.1.562.2.4.1.18.2.10.1.6
This attribute is the login directory for file system commands or FTP commands. The userid will initially be placed in this directory upon logging in to Telnet, FMIP, Local or FTP. The default value of '/' is the root of the /sfs/ shadowed file system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..128)  

acUseridAllowedOutAccess 1.3.6.1.4.1.562.2.4.1.18.2.10.1.7
This attribute indicates whether or not the userid will be allowed outgoing Telnet access from the Passport. Description of bits: telnet(0)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

acIpAccess 1.3.6.1.4.1.562.2.4.1.18.3
OBJECT IDENTIFIER    

acIpAccessRowStatusTable 1.3.6.1.4.1.562.2.4.1.18.3.1
This entry controls the addition and deletion of acIpAccess components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcIpAccessRowStatusEntry

acIpAccessRowStatusEntry 1.3.6.1.4.1.562.2.4.1.18.3.1.1
A single entry in the table represents a single acIpAccess component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AcIpAccessRowStatusEntry  

acIpAccessRowStatus 1.3.6.1.4.1.562.2.4.1.18.3.1.1.1
This variable is used as the basis for SNMP naming of acIpAccess components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

acIpAccessComponentName 1.3.6.1.4.1.562.2.4.1.18.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

acIpAccessStorageType 1.3.6.1.4.1.562.2.4.1.18.3.1.1.4
This variable represents the storage type value for the acIpAccess tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

acIpAccessIndex 1.3.6.1.4.1.562.2.4.1.18.3.1.1.10
This variable represents the index for the acIpAccess tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

acIpAccessProvTable 1.3.6.1.4.1.562.2.4.1.18.3.10
This group contains the provisionable attributes for an IpAccess component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcIpAccessProvEntry

acIpAccessProvEntry 1.3.6.1.4.1.562.2.4.1.18.3.10.1
An entry in the acIpAccessProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AcIpAccessProvEntry  

acIpAccessIpAddressMask 1.3.6.1.4.1.562.2.4.1.18.3.10.1.1
This attribute indicates the bit mask indicating the significant bits which are used in the comparison of an incoming IP address against the 'friendly' IP address in the instance value of the IpAccess component. This bit mask is ANDed to the incoming IP address, and ANDed to the instance value, before the comparison. An IP subnetwork address, in combination with this bit mask attribute, may be provisioned to include an entire IP subnetwork into the friendly IP address list with a single IpAccess component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mgmtInterfacesGroup 1.3.6.1.4.1.562.2.4.2.15.1
OBJECT IDENTIFIER    

mgmtInterfacesGroupBE 1.3.6.1.4.1.562.2.4.2.15.1.5
OBJECT IDENTIFIER    

mgmtInterfacesGroupBE01 1.3.6.1.4.1.562.2.4.2.15.1.5.2
OBJECT IDENTIFIER    

mgmtInterfacesGroupBE01A 1.3.6.1.4.1.562.2.4.2.15.1.5.2.2
OBJECT IDENTIFIER    

mgmtInterfacesCapabilities 1.3.6.1.4.1.562.2.4.2.15.3
OBJECT IDENTIFIER    

mgmtInterfacesCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.15.3.5
OBJECT IDENTIFIER    

mgmtInterfacesCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.15.3.5.2
OBJECT IDENTIFIER    

mgmtInterfacesCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.15.3.5.2.2
OBJECT IDENTIFIER