Nortel-Magellan-Passport-FrameRelayMuxMIB
File:
Nortel-Magellan-Passport-FrameRelayMuxMIB.mib (77887 bytes)
Imported modules
Imported symbols
Defined Types
| FrMuxRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxRowStatus |
RowStatus |
|
| |
frMuxComponentName |
DisplayString |
|
| |
frMuxStorageType |
StorageType |
|
| |
frMuxIndex |
Integer32 |
|
| FrMuxOperStatusEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxSnmpOperStatus |
INTEGER |
|
| FrMuxIfEntryEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxIfAdminStatus |
INTEGER |
|
| |
frMuxIfIndex |
InterfaceIndex |
|
| FrMuxCidDataEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxCustomerIdentifier |
Unsigned32 |
|
| FrMuxStateEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxAdminState |
INTEGER |
|
| |
frMuxOperationalState |
INTEGER |
|
| |
frMuxUsageState |
INTEGER |
|
| |
frMuxAvailabilityStatus |
OCTET STRING |
|
| |
frMuxProceduralStatus |
OCTET STRING |
|
| |
frMuxControlStatus |
OCTET STRING |
|
| |
frMuxAlarmStatus |
OCTET STRING |
|
| |
frMuxStandbyStatus |
INTEGER |
|
| |
frMuxUnknownStatus |
INTEGER |
|
| FrMuxStatsEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxLastUnknownDlci |
Unsigned32 |
|
| |
frMuxUnknownDlciFramesFromIf |
Counter32 |
|
| |
frMuxInvalidHeaderFramesFromIf |
Counter32 |
|
| |
frMuxTimeFramerCongested |
Counter32 |
|
| FrMuxFramerRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxFramerRowStatus |
RowStatus |
|
| |
frMuxFramerComponentName |
DisplayString |
|
| |
frMuxFramerStorageType |
StorageType |
|
| |
frMuxFramerIndex |
NonReplicated |
|
| FrMuxFramerProvEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxFramerInterfaceName |
Link |
|
| FrMuxFramerLinkEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxFramerFlagsBetweenFrames |
Unsigned32 |
|
| FrMuxFramerStateEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxFramerAdminState |
INTEGER |
|
| |
frMuxFramerOperationalState |
INTEGER |
|
| |
frMuxFramerUsageState |
INTEGER |
|
| FrMuxFramerStatsEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxFramerFrmToIf |
Counter32 |
|
| |
frMuxFramerFrmFromIf |
Counter32 |
|
| |
frMuxFramerOctetFromIf |
Counter32 |
|
| |
frMuxFramerAborts |
Counter32 |
|
| |
frMuxFramerCrcErrors |
Counter32 |
|
| |
frMuxFramerLrcErrors |
Counter32 |
|
| |
frMuxFramerNonOctetErrors |
Counter32 |
|
| |
frMuxFramerOverruns |
Counter32 |
|
| |
frMuxFramerUnderruns |
Counter32 |
|
| |
frMuxFramerLargeFrmErrors |
Counter32 |
|
| |
frMuxFramerFrmModeErrors |
Counter32 |
|
| FrMuxFramerUtilEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxFramerNormPrioLinkUtilToIf |
Gauge32 |
|
| |
frMuxFramerNormPrioLinkUtilFromIf |
Gauge32 |
|
| FrMuxLmiRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxLmiRowStatus |
RowStatus |
|
| |
frMuxLmiComponentName |
DisplayString |
|
| |
frMuxLmiStorageType |
StorageType |
|
| |
frMuxLmiIndex |
NonReplicated |
|
| FrMuxLmiProvEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxLmiProcedures |
INTEGER |
|
| |
frMuxLmiLinkVerificationTimer |
Unsigned32 |
|
| |
frMuxLmiFullStatusPollingCycles |
Unsigned32 |
|
| |
frMuxLmiErrorEventThreshold |
Unsigned32 |
|
| |
frMuxLmiEventCount |
Unsigned32 |
|
| FrMuxLmiStateEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxLmiAdminState |
INTEGER |
|
| |
frMuxLmiOperationalState |
INTEGER |
|
| |
frMuxLmiUsageState |
INTEGER |
|
| FrMuxLmiPsiEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxLmiProtocolStatus |
INTEGER |
|
| FrMuxLmiStatsEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxLmiKeepAliveStatusEnqToIf |
Counter32 |
|
| |
frMuxLmiFullStatusEnqToIf |
Counter32 |
|
| |
frMuxLmiProtocolErrors |
Counter32 |
|
| |
frMuxLmiUnexpectedIes |
Counter32 |
|
| |
frMuxLmiSequenceErrors |
Counter32 |
|
| |
frMuxLmiUnexpectedReports |
Counter32 |
|
| |
frMuxLmiNoStatusReportCount |
Counter32 |
|
| FrMuxDlciRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxDlciRowStatus |
RowStatus |
|
| |
frMuxDlciComponentName |
DisplayString |
|
| |
frMuxDlciStorageType |
StorageType |
|
| |
frMuxDlciIndex |
Integer32 |
|
| FrMuxDlciOperEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxDlciApplicationName |
RowPointer |
|
| FrMuxDlciStateEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxDlciAdminState |
INTEGER |
|
| |
frMuxDlciOperationalState |
INTEGER |
|
| |
frMuxDlciUsageState |
INTEGER |
|
| FrMuxDlciAbitEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxDlciABitStatusFromIf |
INTEGER |
|
| FrMuxDlciStatsEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxDlciFrmToIf |
Counter32 |
|
| |
frMuxDlciBytesToIf |
PassportCounter64 |
|
| |
frMuxDlciFrmFromIf |
Counter32 |
|
| |
frMuxDlciDeFrmFromIf |
Counter32 |
|
| |
frMuxDlciBytesFromIf |
PassportCounter64 |
|
| |
frMuxDlciDeBytesFromIf |
PassportCounter64 |
|
| |
frMuxDlciFecnFrmToIf |
Counter32 |
|
| |
frMuxDlciFecnFrmFromIf |
Counter32 |
|
| |
frMuxDlciBecnFrmToIf |
Counter32 |
|
| |
frMuxDlciBecnFrmFromIf |
Counter32 |
|
| |
frMuxDlciDiscCongestedFromIf |
Counter32 |
|
| |
frMuxDlciDiscCongestedFromIfBytes |
Counter32 |
|
| |
frMuxDlciDiscDeCongestedFromIf |
Counter32 |
|
| |
frMuxDlciDiscDeCongestedFromIfBytes |
Counter32 |
|
| |
frMuxDlciErrorShortFrmFromIf |
Counter32 |
|
| |
frMuxDlciErrorLongFrmFromIf |
Counter32 |
|
| FrMuxDlciApplInfoRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxDlciApplInfoRowStatus |
RowStatus |
|
| |
frMuxDlciApplInfoComponentName |
DisplayString |
|
| |
frMuxDlciApplInfoStorageType |
StorageType |
|
| |
frMuxDlciApplInfoIndex |
NonReplicated |
|
| FrMuxDlciApplInfoProvEntry |
|
| SEQUENCE |
|
|
|
| |
frMuxDlciApplInfoApplicationName |
Link |
|
Defined Values
| frMux |
1.3.6.1.4.1.562.2.4.1.112 |
| OBJECT IDENTIFIER |
|
|
|
| frMuxRowStatusTable |
1.3.6.1.4.1.562.2.4.1.112.1 |
| This entry controls the addition and deletion of
frMux components. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxRowStatusEntry |
|
| frMuxRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.112.1.1 |
| A single entry in the table represents a single
frMux component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxRowStatusEntry |
|
|
| frMuxRowStatus |
1.3.6.1.4.1.562.2.4.1.112.1.1.1 |
| This variable is used as the basis for SNMP naming of
frMux components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| frMuxComponentName |
1.3.6.1.4.1.562.2.4.1.112.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| frMuxStorageType |
1.3.6.1.4.1.562.2.4.1.112.1.1.4 |
| This variable represents the storage type value for the
frMux tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| frMuxIndex |
1.3.6.1.4.1.562.2.4.1.112.1.1.10 |
| This variable represents the index for the frMux tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..65535 |
|
| frMuxOperStatusTable |
1.3.6.1.4.1.562.2.4.1.112.8 |
| This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxOperStatusEntry |
|
| frMuxOperStatusEntry |
1.3.6.1.4.1.562.2.4.1.112.8.1 |
| An entry in the frMuxOperStatusTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxOperStatusEntry |
|
|
| frMuxSnmpOperStatus |
1.3.6.1.4.1.562.2.4.1.112.8.1.1 |
| The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| frMuxIfEntryTable |
1.3.6.1.4.1.562.2.4.1.112.9 |
| This group contains the provisionable attributes for the ifEntry. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxIfEntryEntry |
|
| frMuxIfEntryEntry |
1.3.6.1.4.1.562.2.4.1.112.9.1 |
| An entry in the frMuxIfEntryTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxIfEntryEntry |
|
|
| frMuxIfAdminStatus |
1.3.6.1.4.1.562.2.4.1.112.9.1.1 |
| The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| frMuxIfIndex |
1.3.6.1.4.1.562.2.4.1.112.9.1.2 |
| This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
1..65535 |
|
| frMuxCidDataTable |
1.3.6.1.4.1.562.2.4.1.112.10 |
| This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxCidDataEntry |
|
| frMuxCidDataEntry |
1.3.6.1.4.1.562.2.4.1.112.10.1 |
| An entry in the frMuxCidDataTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxCidDataEntry |
|
|
| frMuxCustomerIdentifier |
1.3.6.1.4.1.562.2.4.1.112.10.1.1 |
| This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0 | 1..8191 |
|
| frMuxStateTable |
1.3.6.1.4.1.562.2.4.1.112.11 |
| This group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxStateEntry |
|
| frMuxStateEntry |
1.3.6.1.4.1.562.2.4.1.112.11.1 |
| An entry in the frMuxStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxStateEntry |
|
|
| frMuxAdminState |
1.3.6.1.4.1.562.2.4.1.112.11.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| frMuxOperationalState |
1.3.6.1.4.1.562.2.4.1.112.11.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| frMuxUsageState |
1.3.6.1.4.1.562.2.4.1.112.11.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| frMuxAvailabilityStatus |
1.3.6.1.4.1.562.2.4.1.112.11.1.4 |
| If supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| frMuxProceduralStatus |
1.3.6.1.4.1.562.2.4.1.112.11.1.5 |
| If supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| frMuxControlStatus |
1.3.6.1.4.1.562.2.4.1.112.11.1.6 |
| If supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| frMuxAlarmStatus |
1.3.6.1.4.1.562.2.4.1.112.11.1.7 |
| If supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| frMuxStandbyStatus |
1.3.6.1.4.1.562.2.4.1.112.11.1.8 |
| If supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
hotStandby(0), coldStandby(1), providingService(2), notSet(15) |
|
| frMuxUnknownStatus |
1.3.6.1.4.1.562.2.4.1.112.11.1.9 |
| This attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
false(0), true(1) |
|
| frMuxStatsTable |
1.3.6.1.4.1.562.2.4.1.112.12 |
| This group contains the statistics about the operational behavior of
the FrMux at the interface level. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxStatsEntry |
|
| frMuxStatsEntry |
1.3.6.1.4.1.562.2.4.1.112.12.1 |
| An entry in the frMuxStatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxStatsEntry |
|
|
| frMuxLastUnknownDlci |
1.3.6.1.4.1.562.2.4.1.112.12.1.1 |
| This attribute identifies the most recent DLCI which user frames
were received on, for which a Dlci has not been provisioned on the
interface. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..1023 |
|
| frMuxUnknownDlciFramesFromIf |
1.3.6.1.4.1.562.2.4.1.112.12.1.2 |
| This attribute counts frames received from the interface with an
unknown DLCI (Dlci which is not provisioned). When the
maximum is reached the count wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxTimeFramerCongested |
1.3.6.1.4.1.562.2.4.1.112.12.1.4 |
| This attribute accumulates the time (in msec) during which Framer
congestion has been observed in the direction towards the interface.
The overload causing this statistic to increase may be caused by
oversubscription. When this count reaches maximum, it wraps to
zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramer |
1.3.6.1.4.1.562.2.4.1.112.2 |
| OBJECT IDENTIFIER |
|
|
|
| frMuxFramerRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.112.2.1.1 |
| A single entry in the table represents a single
frMuxFramer component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxFramerRowStatusEntry |
|
|
| frMuxFramerRowStatus |
1.3.6.1.4.1.562.2.4.1.112.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
frMuxFramer components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| frMuxFramerComponentName |
1.3.6.1.4.1.562.2.4.1.112.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| frMuxFramerStorageType |
1.3.6.1.4.1.562.2.4.1.112.2.1.1.4 |
| This variable represents the storage type value for the
frMuxFramer tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| frMuxFramerIndex |
1.3.6.1.4.1.562.2.4.1.112.2.1.1.10 |
| This variable represents the index for the frMuxFramer tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| frMuxFramerProvTable |
1.3.6.1.4.1.562.2.4.1.112.2.10 |
| This group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxFramerProvEntry |
|
| frMuxFramerProvEntry |
1.3.6.1.4.1.562.2.4.1.112.2.10.1 |
| An entry in the frMuxFramerProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxFramerProvEntry |
|
|
| frMuxFramerInterfaceName |
1.3.6.1.4.1.562.2.4.1.112.2.10.1.1 |
| This attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| frMuxFramerLinkTable |
1.3.6.1.4.1.562.2.4.1.112.2.11 |
| This group contains attributes defining the framing of data on the
link interface. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxFramerLinkEntry |
|
| frMuxFramerLinkEntry |
1.3.6.1.4.1.562.2.4.1.112.2.11.1 |
| An entry in the frMuxFramerLinkTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxFramerLinkEntry |
|
|
| frMuxFramerFlagsBetweenFrames |
1.3.6.1.4.1.562.2.4.1.112.2.11.1.4 |
| This attribute defines the number of flags that are inserted between
frames sent to the link interface. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..16 |
|
| frMuxFramerStateTable |
1.3.6.1.4.1.562.2.4.1.112.2.12 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxFramerStateEntry |
|
| frMuxFramerStateEntry |
1.3.6.1.4.1.562.2.4.1.112.2.12.1 |
| An entry in the frMuxFramerStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxFramerStateEntry |
|
|
| frMuxFramerAdminState |
1.3.6.1.4.1.562.2.4.1.112.2.12.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| frMuxFramerOperationalState |
1.3.6.1.4.1.562.2.4.1.112.2.12.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| frMuxFramerUsageState |
1.3.6.1.4.1.562.2.4.1.112.2.12.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| frMuxFramerStatsTable |
1.3.6.1.4.1.562.2.4.1.112.2.13 |
| This group contains the operational statistics data for a Framer
component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxFramerStatsEntry |
|
| frMuxFramerStatsEntry |
1.3.6.1.4.1.562.2.4.1.112.2.13.1 |
| An entry in the frMuxFramerStatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxFramerStatsEntry |
|
|
| frMuxFramerFrmToIf |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.1 |
| The number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerFrmFromIf |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.2 |
| The number of frames received from the link interface by Framer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerOctetFromIf |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.3 |
| The number of bytes received from the link interface by Framer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerAborts |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.4 |
| This attribute is the total number of aborts received. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerCrcErrors |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.5 |
| This attribute is the total number of frames with CRC errors,
occurring in the receive direction from the link. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerLrcErrors |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.6 |
| This attribute is the total number of frames with LRC errors,
occurring in the Tx link prior to transmission onto the link. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerNonOctetErrors |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.7 |
| This attribute is the total number of frames that were non octet
aligned. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerOverruns |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.8 |
| This attribute is the total number of frames received from the link
for which overruns occurred. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerUnderruns |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.9 |
| This attribute is the total number of frames transmitted to the link
for which underruns occurred. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerLargeFrmErrors |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.10 |
| This attribute is the total number of frames received which were too
large. The frame execeeded the maximumFrameLengthLimit
provisioned attribute or it contained more than the 255 block
hardware limit. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerFrmModeErrors |
1.3.6.1.4.1.562.2.4.1.112.2.13.1.11 |
| This attribute is the total number of frames detected with framing
mode errors. A framingModeError is flagged when frames are
inconsistent with the specified framingType, that is when
interrupting frames are used while running in hdlc mode. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxFramerUtilTable |
1.3.6.1.4.1.562.2.4.1.112.2.14 |
| This group contains the link utilizaiton operational data for a
Framer component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxFramerUtilEntry |
|
| frMuxFramerUtilEntry |
1.3.6.1.4.1.562.2.4.1.112.2.14.1 |
| An entry in the frMuxFramerUtilTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxFramerUtilEntry |
|
|
| frMuxFramerNormPrioLinkUtilToIf |
1.3.6.1.4.1.562.2.4.1.112.2.14.1.1 |
| This attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) sent to the link as a percentage of the
available bandwidth on the link. Note that this includes traffic with
Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2
and 3. The utilization is the average for the last minute. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
0..100 |
|
| frMuxFramerNormPrioLinkUtilFromIf |
1.3.6.1.4.1.562.2.4.1.112.2.14.1.3 |
| This attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) received from the link as a percentage
of the available bandwidth on the link. Note that this includes traffic
with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority
of 2 and 3. The utilization is the average for the last minute. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
0..100 |
|
| frMuxLmi |
1.3.6.1.4.1.562.2.4.1.112.3 |
| OBJECT IDENTIFIER |
|
|
|
| frMuxLmiRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.112.3.1.1 |
| A single entry in the table represents a single
frMuxLmi component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxLmiRowStatusEntry |
|
|
| frMuxLmiRowStatus |
1.3.6.1.4.1.562.2.4.1.112.3.1.1.1 |
| This variable is used as the basis for SNMP naming of
frMuxLmi components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| frMuxLmiComponentName |
1.3.6.1.4.1.562.2.4.1.112.3.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| frMuxLmiStorageType |
1.3.6.1.4.1.562.2.4.1.112.3.1.1.4 |
| This variable represents the storage type value for the
frMuxLmi tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| frMuxLmiIndex |
1.3.6.1.4.1.562.2.4.1.112.3.1.1.10 |
| This variable represents the index for the frMuxLmi tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| frMuxLmiProvTable |
1.3.6.1.4.1.562.2.4.1.112.3.10 |
| This group contains the provisionable attributes of the Local
Management Interface component of the FrMux. The Local
Management Interface of the FrMux is always User Side Procedure
of the User Network Interface (USP-UNI). |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxLmiProvEntry |
|
| frMuxLmiProvEntry |
1.3.6.1.4.1.562.2.4.1.112.3.10.1 |
| An entry in the frMuxLmiProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxLmiProvEntry |
|
|
| frMuxLmiProcedures |
1.3.6.1.4.1.562.2.4.1.112.3.10.1.1 |
| This attribute selects the procedures to be used for the Local
Management Interface. The following are the supported procedures:
none : No Local Management Interface procedure is active.
vendorForum : Local Management Interface procedure according to
the Vendor Forum specification is active. DLCI 1023 is used for the
LMI protocol.
ansi: Local Management Interface procedure according to the
ANSI specification is active. DLCI 0 is used for the LMI protocol.
ccitt: Local Management Interface procedure according to the
CCITT specification is active. DLCI 0 is used for the LMI protocol. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), vendorForum(1), ansi(2), ccitt(3) |
|
| frMuxLmiLinkVerificationTimer |
1.3.6.1.4.1.562.2.4.1.112.3.10.1.2 |
| This attribute specifies the time interval (in seconds) at which the
FrMux sends Status Enquiry messages to the interface. Exchange of
Status Enquiry and Status Report messages constitutes a polling
cycle, so this attribute may also be interpreted as time interval at
which the FrMux initiates polling cycles. It must be less than
checkPointTimer (t392) configured at the other end of the Frame
Relay interface.
This attribute corresponds to t391 of the ANSI and CCITT
specifications, and nT1 of the Vendor Forum specification. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
5 | 10 | 15 | 20 | 25 | 30 |
|
| frMuxLmiFullStatusPollingCycles |
1.3.6.1.4.1.562.2.4.1.112.3.10.1.3 |
| This attribute specifies every which polling cycle the FrMux sends a
full STATUS ENQUIRY to the interface. Every
fullStatusPollingCycles polling cycles the FrMux sends a full
STATUS ENQUIRY. In all other cycles of a sequence of
fullStatusPollingCycles polling cycles the FrMux sends a keep alive
STATUS ENQUIRY.
This attribute corresponds to n391 of the ANSI and CCITT
specifications and nN1 of the Vendor Forum specification. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..255 |
|
| frMuxLmiErrorEventThreshold |
1.3.6.1.4.1.562.2.4.1.112.3.10.1.4 |
| This attribute specifies the number of error events which, if they
occur within eventCount events, will cause a protocol error
condition (protocolStatus = errorCondition). The error condition is
cleared after eventCount sequential correct events occur
(protocolStatus = normalCondition).
An event is one of the following: (1) expiry of the
linkVerificationTimer (t391), (2) reception of a STATUS message.
An error event is one of the following: (1)non-receipt of the
STATUS message in t391 seconds, (2)invalid STATUS message, (3)
invalid sequence number.
This attribute corresponds to n392 of the ANSI and CCITT
specifications and nN2 of the Vendor Forum Specification.
This attribute must be less than or equal to eventCount. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..10 |
|
| frMuxLmiEventCount |
1.3.6.1.4.1.562.2.4.1.112.3.10.1.5 |
| This attribute specifies the number of contiguous events within
which no more than eventErrorThreshold error events are allowed.
This attribute corresponds to n392 of the ANSI and CCITT
specifications and nN3 of the Vendor Forum Specification.
This attribute must be greater than or equal to errorEventThreshold. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..10 |
|
| frMuxLmiStateTable |
1.3.6.1.4.1.562.2.4.1.112.3.11 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxLmiStateEntry |
|
| frMuxLmiStateEntry |
1.3.6.1.4.1.562.2.4.1.112.3.11.1 |
| An entry in the frMuxLmiStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxLmiStateEntry |
|
|
| frMuxLmiAdminState |
1.3.6.1.4.1.562.2.4.1.112.3.11.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| frMuxLmiOperationalState |
1.3.6.1.4.1.562.2.4.1.112.3.11.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| frMuxLmiUsageState |
1.3.6.1.4.1.562.2.4.1.112.3.11.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| frMuxLmiPsiTable |
1.3.6.1.4.1.562.2.4.1.112.3.12 |
| This group provides the protocol status of the Local Management
Interface of this FrMux. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxLmiPsiEntry |
|
| frMuxLmiPsiEntry |
1.3.6.1.4.1.562.2.4.1.112.3.12.1 |
| An entry in the frMuxLmiPsiTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxLmiPsiEntry |
|
|
| frMuxLmiProtocolStatus |
1.3.6.1.4.1.562.2.4.1.112.3.12.1.1 |
| This attribute indicates whether the Lmi is in an error condition or
whether the protocol is behaving normally. When operating with no
LMI protocol (procedures = none), this attribute will always be set
to normalCondition. When operating with an LMI protocol
(procedures set to one of venforForum, ansi, ccitt), this attribute is
set to errorCondition when errorEventThreshold of the last
eventCount events are in error.
The error condition is cleared when eventCount consecutive good
events take place.
The consequence of an error condition is that all Dlci's on this
interface become disabled and there is no data flow in either
direction. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
errorCondition(0), normalCondition(1) |
|
| frMuxLmiStatsTable |
1.3.6.1.4.1.562.2.4.1.112.3.13 |
| This group contains the operational statistics for the FrMux Local
Management Interface. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxLmiStatsEntry |
|
| frMuxLmiStatsEntry |
1.3.6.1.4.1.562.2.4.1.112.3.13.1 |
| An entry in the frMuxLmiStatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxLmiStatsEntry |
|
|
| frMuxLmiKeepAliveStatusEnqToIf |
1.3.6.1.4.1.562.2.4.1.112.3.13.1.1 |
| This attribute counts the number of keep alive STATUS ENQUIRY
messages sent to the interface. When the maximum count is reached
it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxLmiFullStatusEnqToIf |
1.3.6.1.4.1.562.2.4.1.112.3.13.1.2 |
| This attribute counts the number of full STATUS ENQUIRY
messages sent to the interface. When the maximum count is reached
it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxLmiProtocolErrors |
1.3.6.1.4.1.562.2.4.1.112.3.13.1.3 |
| This attribute counts the number of Local Management Interface
protocol errors. Protocol errors include (1) protocol message format
errors, (2) protocol timer expiry errors, and (3) sequence errors.
When the maximum count is reached it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxLmiUnexpectedIes |
1.3.6.1.4.1.562.2.4.1.112.3.13.1.4 |
| This attribute counts the number of frames received with an
Information Element identifier that is unknown or unexpected.
When the maximum count is reached, this counter wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxLmiSequenceErrors |
1.3.6.1.4.1.562.2.4.1.112.3.13.1.5 |
| This attribute counts the number of Local Management Interface
sequence errors. A sequence error is receipt of an LMI message
with a receive sequence number not equal to the last send sequence
number. When the maximum count is reached the counter wraps to
zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxLmiUnexpectedReports |
1.3.6.1.4.1.562.2.4.1.112.3.13.1.6 |
| This attribute counts the number of frames received on the Local
Management Interface with an unknown or unexpected report type.
When the maximum count is reached the counter wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxLmiNoStatusReportCount |
1.3.6.1.4.1.562.2.4.1.112.3.13.1.7 |
| This attribute counts the number of times when no status report or
an invalid status report comes from the external network. This
attribute is incremented in two cases:
i) after a status enquiry is sent out and t391 timer expires without
having a status report received.
ii) an invalid status report is received.
When the maximum count is reached it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlci |
1.3.6.1.4.1.562.2.4.1.112.4 |
| OBJECT IDENTIFIER |
|
|
|
| frMuxDlciRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.112.4.1.1 |
| A single entry in the table represents a single
frMuxDlci component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxDlciRowStatusEntry |
|
|
| frMuxDlciRowStatus |
1.3.6.1.4.1.562.2.4.1.112.4.1.1.1 |
| This variable is used as the basis for SNMP naming of
frMuxDlci components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| frMuxDlciComponentName |
1.3.6.1.4.1.562.2.4.1.112.4.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| frMuxDlciStorageType |
1.3.6.1.4.1.562.2.4.1.112.4.1.1.4 |
| This variable represents the storage type value for the
frMuxDlci tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| frMuxDlciIndex |
1.3.6.1.4.1.562.2.4.1.112.4.1.1.10 |
| This variable represents the index for the frMuxDlci tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
16..1007 |
|
| frMuxDlciOperTable |
1.3.6.1.4.1.562.2.4.1.112.4.10 |
| This group contains the name of the application associated with this
Dlci. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxDlciOperEntry |
|
| frMuxDlciOperEntry |
1.3.6.1.4.1.562.2.4.1.112.4.10.1 |
| An entry in the frMuxDlciOperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxDlciOperEntry |
|
|
| frMuxDlciApplicationName |
1.3.6.1.4.1.562.2.4.1.112.4.10.1.1 |
| This attribute contains the name of the application associated with
this Dlci. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowPointer |
|
|
| frMuxDlciStateTable |
1.3.6.1.4.1.562.2.4.1.112.4.11 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxDlciStateEntry |
|
| frMuxDlciStateEntry |
1.3.6.1.4.1.562.2.4.1.112.4.11.1 |
| An entry in the frMuxDlciStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxDlciStateEntry |
|
|
| frMuxDlciAdminState |
1.3.6.1.4.1.562.2.4.1.112.4.11.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| frMuxDlciOperationalState |
1.3.6.1.4.1.562.2.4.1.112.4.11.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| frMuxDlciUsageState |
1.3.6.1.4.1.562.2.4.1.112.4.11.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| frMuxDlciAbitTable |
1.3.6.1.4.1.562.2.4.1.112.4.12 |
| This group contains the A-Bit status information for this Dlci. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxDlciAbitEntry |
|
| frMuxDlciAbitEntry |
1.3.6.1.4.1.562.2.4.1.112.4.12.1 |
| An entry in the frMuxDlciAbitTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxDlciAbitEntry |
|
|
| frMuxDlciABitStatusFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.12.1.1 |
| This attribute is the most recent A-Bit status received from the
interface. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
inactive(0), active(1) |
|
| frMuxDlciStatsTable |
1.3.6.1.4.1.562.2.4.1.112.4.13 |
| This group contains the operational statistics for the FrMux Dlci. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
FrMuxDlciStatsEntry |
|
| frMuxDlciStatsEntry |
1.3.6.1.4.1.562.2.4.1.112.4.13.1 |
| An entry in the frMuxDlciStatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxDlciStatsEntry |
|
|
| frMuxDlciFrmToIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.1 |
| This attribute counts the frames sent to the interface. When the
maximum count is reached the count wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciBytesToIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.2 |
| This attribute counts the bytes sent to the interface. When the
maximum count is reached the count wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| frMuxDlciFrmFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.3 |
| This attribute counts the frames received from the interface. Frames
that are discarded are not included in this count. When the
maximum count is reached the count wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciDeFrmFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.4 |
| This attribute counts the frames received from the interface with the
Discard Eligibility (DE) bit set. When the count reaches maximum
it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciBytesFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.5 |
| This attribute counts the bytes received from the interface. Frames
that are discarded are not included in this count. When the
maximum count is reached the count wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| frMuxDlciDeBytesFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.6 |
| This attribute counts the bytes received from the interface with the
Discard Eligibility (DE) bit set. When the count reaches maximum
it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PassportCounter64 |
|
|
| frMuxDlciFecnFrmToIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.7 |
| This attribute counts the frames sent to the interface with the
Forward Explicit Congestion Notification (FECN) bit set. When the
count reaches maximum it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciFecnFrmFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.8 |
| This attribute counts the frames received from the interface with the
Forward Explicit Congestion Notification (FECN) bit set. When the
count reaches maximum it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciBecnFrmToIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.9 |
| This attribute counts the frames sent to the interface with the
Backward Explicit Congestion Notification (BECN) bit set. When
the count reaches maximum it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciBecnFrmFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.10 |
| This attribute counts the frames received from the interface with the
Backward Explicit Congestion Notification (BECN) bit set. When
the count reaches maximum it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciDiscCongestedFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.11 |
| This attribute counts the number of frames discarded in the receive
direction due to local congestion. When this count reaches
maximum, it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciDiscCongestedFromIfBytes |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.12 |
| This attribute counts the number of bytes discarded in the receive
direction due to local congestion. When this count reaches
maximum, it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciDiscDeCongestedFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.13 |
| This attribute counts the number of discard eligible (DE=1) frames
discarded in the receive direction due to local congestion. When this
count reaches maximum, it wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciDiscDeCongestedFromIfBytes |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.14 |
| This attribute counts the number of bytes of discard eligible (DE=1)
traffic discarded in the receive direction due to local congestion.
When the maximum count is reached the count wraps to zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciErrorShortFrmFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.15 |
| This attribute counts the frames received with 0 octets in the
information field. When the count reaches maximum it wraps to
zero. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciErrorLongFrmFromIf |
1.3.6.1.4.1.562.2.4.1.112.4.13.1.16 |
| This attribute counts the frames received with number of octets in
the information field greater than the maximum frame size
provisioned in the component pointed to by the applicationName.
When the count reaches maximum it wraps to zero. Frames whose
lengths are greater than the hardware receive buffer are discarded by
the Framer and are therefore not included in this count. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| frMuxDlciApplInfoRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.112.4.2.1.1 |
| A single entry in the table represents a single
frMuxDlciApplInfo component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxDlciApplInfoRowStatusEntry |
|
|
| frMuxDlciApplInfoRowStatus |
1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
frMuxDlciApplInfo components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| frMuxDlciApplInfoComponentName |
1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| frMuxDlciApplInfoStorageType |
1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.4 |
| This variable represents the storage type value for the
frMuxDlciApplInfo tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| frMuxDlciApplInfoIndex |
1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.10 |
| This variable represents the index for the frMuxDlciApplInfo tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| frMuxDlciApplInfoProvEntry |
1.3.6.1.4.1.562.2.4.1.112.4.2.11.1 |
| An entry in the frMuxDlciApplInfoProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
FrMuxDlciApplInfoProvEntry |
|
|
| frMuxDlciApplInfoApplicationName |
1.3.6.1.4.1.562.2.4.1.112.4.2.11.1.1 |
| This attribute is the link to the application associated with this Dlci. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|