Nortel-Magellan-Passport-FrameRelayAtmMIB

File: Nortel-Magellan-Passport-FrameRelayAtmMIB.mib (271897 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 RowPointer DisplayString
StorageType RowStatus PassportCounter64
InterfaceIndex Gauge32 Integer32
Unsigned32 AsciiString NonReplicated
HexString EnterpriseDateAndTime Link
IntegerSequence Unsigned64

Defined Types

FrAtmRowStatusEntry  
SEQUENCE    
  frAtmRowStatus RowStatus
  frAtmComponentName DisplayString
  frAtmStorageType StorageType
  frAtmIndex Integer32

FrAtmCidDataEntry  
SEQUENCE    
  frAtmCustomerIdentifier Unsigned32

FrAtmStateEntry  
SEQUENCE    
  frAtmAdminState INTEGER
  frAtmOperationalState INTEGER
  frAtmUsageState INTEGER
  frAtmAvailabilityStatus OCTET STRING
  frAtmProceduralStatus OCTET STRING
  frAtmControlStatus OCTET STRING
  frAtmAlarmStatus OCTET STRING
  frAtmStandbyStatus INTEGER
  frAtmUnknownStatus INTEGER

FrAtmStatsEntry  
SEQUENCE    
  frAtmLastUnknownDlci Unsigned32
  frAtmUnknownDlciFramesFromIf Counter32
  frAtmInvalidHeaderFramesFromIf Counter32

FrAtmIfEntryEntry  
SEQUENCE    
  frAtmIfAdminStatus INTEGER
  frAtmIfIndex InterfaceIndex

FrAtmOperStatusEntry  
SEQUENCE    
  frAtmSnmpOperStatus INTEGER

FrAtmEmissionPriorityQsEntry  
SEQUENCE    
  frAtmNumberOfEmissionQs Unsigned32

FrAtmFrmToIfByQueueEntry  
SEQUENCE    
  frAtmFrmToIfByQueueIndex Integer32
  frAtmFrmToIfByQueueValue Unsigned32

FrAtmOctetToIfByQueueEntry  
SEQUENCE    
  frAtmOctetToIfByQueueIndex Integer32
  frAtmOctetToIfByQueueValue Unsigned32

FrAtmFramerRowStatusEntry  
SEQUENCE    
  frAtmFramerRowStatus RowStatus
  frAtmFramerComponentName DisplayString
  frAtmFramerStorageType StorageType
  frAtmFramerIndex NonReplicated

FrAtmFramerProvEntry  
SEQUENCE    
  frAtmFramerInterfaceName Link

FrAtmFramerLinkEntry  
SEQUENCE    
  frAtmFramerFlagsBetweenFrames Unsigned32

FrAtmFramerStateEntry  
SEQUENCE    
  frAtmFramerAdminState INTEGER
  frAtmFramerOperationalState INTEGER
  frAtmFramerUsageState INTEGER

FrAtmFramerStatsEntry  
SEQUENCE    
  frAtmFramerFrmToIf Counter32
  frAtmFramerFrmFromIf Counter32
  frAtmFramerOctetFromIf Counter32
  frAtmFramerAborts Counter32
  frAtmFramerCrcErrors Counter32
  frAtmFramerLrcErrors Counter32
  frAtmFramerNonOctetErrors Counter32
  frAtmFramerOverruns Counter32
  frAtmFramerUnderruns Counter32
  frAtmFramerLargeFrmErrors Counter32
  frAtmFramerFrmModeErrors Counter32

FrAtmFramerUtilEntry  
SEQUENCE    
  frAtmFramerNormPrioLinkUtilToIf Gauge32
  frAtmFramerNormPrioLinkUtilFromIf Gauge32

FrAtmLmiRowStatusEntry  
SEQUENCE    
  frAtmLmiRowStatus RowStatus
  frAtmLmiComponentName DisplayString
  frAtmLmiStorageType StorageType
  frAtmLmiIndex NonReplicated

FrAtmLmiParmsEntry  
SEQUENCE    
  frAtmLmiProcedures INTEGER
  frAtmLmiAsyncStatusReport INTEGER
  frAtmLmiErrorEventThreshold Unsigned32
  frAtmLmiEventCount Unsigned32
  frAtmLmiCheckPointTimer Unsigned32
  frAtmLmiMessageCountTimer Unsigned32
  frAtmLmiIgnoreActiveBit INTEGER
  frAtmLmiSide INTEGER
  frAtmLmiPvcConfigParmsInFsr INTEGER

FrAtmLmiStateEntry  
SEQUENCE    
  frAtmLmiAdminState INTEGER
  frAtmLmiOperationalState INTEGER
  frAtmLmiUsageState INTEGER

FrAtmLmiPsiEntry  
SEQUENCE    
  frAtmLmiProtocolStatus INTEGER
  frAtmLmiOpProcedures INTEGER

FrAtmLmiStatsEntry  
SEQUENCE    
  frAtmLmiKeepAliveStatusToIf Counter32
  frAtmLmiFullStatusToIf Counter32
  frAtmLmiKeepAliveStatusEnqFromIf Counter32
  frAtmLmiFullStatusEnqFromIf Counter32
  frAtmLmiNetworkSideEventHistory AsciiString
  frAtmLmiProtocolErrors Counter32
  frAtmLmiUnexpectedIes Counter32
  frAtmLmiSequenceErrors Counter32
  frAtmLmiUnexpectedReports Counter32
  frAtmLmiPollingVerifTimeouts Counter32
  frAtmLmiKeepAliveEnqToIf Counter32
  frAtmLmiFullStatusEnqToIf Counter32
  frAtmLmiUserSideEventHistory AsciiString
  frAtmLmiStatusSequenceErrors Counter32
  frAtmLmiNoStatusReportCount Counter32

FrAtmLmiUspParmsEntry  
SEQUENCE    
  frAtmLmiFullStatusPollingCycles Unsigned32
  frAtmLmiLinkVerificationTimer Unsigned32

FrAtmDlciRowStatusEntry  
SEQUENCE    
  frAtmDlciRowStatus RowStatus
  frAtmDlciComponentName DisplayString
  frAtmDlciStorageType StorageType
  frAtmDlciIndex Integer32

FrAtmDlciStateEntry  
SEQUENCE    
  frAtmDlciAdminState INTEGER
  frAtmDlciOperationalState INTEGER
  frAtmDlciUsageState INTEGER

FrAtmDlciABitEntry  
SEQUENCE    
  frAtmDlciABitStatusToIf INTEGER
  frAtmDlciABitReasonToIf INTEGER
  frAtmDlciABitStatusFromIf INTEGER
  frAtmDlciABitReasonFromIf INTEGER

FrAtmDlciSpOpEntry  
SEQUENCE    
  frAtmDlciMaximumFrameSize Unsigned32
  frAtmDlciRateEnforcement INTEGER
  frAtmDlciCommittedInformationRate Unsigned32
  frAtmDlciCommittedBurstSize Unsigned32
  frAtmDlciExcessBurstSize Unsigned32
  frAtmDlciMeasurementInterval Unsigned32
  frAtmDlciEmissionPriorityToIf INTEGER
  frAtmDlciDlciType INTEGER
  frAtmDlciTroubled INTEGER
  frAtmDlciTroubledReason INTEGER

FrAtmDlciStatsEntry  
SEQUENCE    
  frAtmDlciFrmToIf Counter32
  frAtmDlciFecnFrmToIf Counter32
  frAtmDlciBecnFrmToIf Counter32
  frAtmDlciDeFrmToIf Counter32
  frAtmDlciDiscCongestedToIf Counter32
  frAtmDlciDiscDeCongestedToIf Counter32
  frAtmDlciFrmFromIf Counter32
  frAtmDlciFecnFrmFromIf Counter32
  frAtmDlciBecnFrmFromIf Counter32
  frAtmDlciEfciFrmFromNetwork Counter32
  frAtmDlciDeFrmFromIf Counter32
  frAtmDlciExcessFrmFromIf Counter32
  frAtmDlciDiscExcessFromIf Counter32
  frAtmDlciDiscFrameAbit Counter32
  frAtmDlciDiscCongestedFromIf Counter32
  frAtmDlciDiscDeCongestedFromIf Counter32
  frAtmDlciErrorShortFrmFromIf Counter32
  frAtmDlciErrorLongFrmFromIf Counter32
  frAtmDlciBecnFrmSetByService Counter32
  frAtmDlciBytesToIf Counter32
  frAtmDlciDeBytesToIf Counter32
  frAtmDlciDiscCongestedToIfBytes Counter32
  frAtmDlciDiscDeCongestedToIfBytes Counter32
  frAtmDlciBytesFromIf Counter32
  frAtmDlciDeBytesFromIf Counter32
  frAtmDlciExcessBytesFromIf Counter32
  frAtmDlciDiscExcessFromIfBytes Counter32
  frAtmDlciDiscByteAbit Counter32
  frAtmDlciDiscCongestedFromIfBytes Counter32
  frAtmDlciDiscDeCongestedFromIfBytes Counter32
  frAtmDlciErrorShortBytesFromIf Counter32
  frAtmDlciErrorLongBytesFromIf Counter32

FrAtmDlciCalldEntry  
SEQUENCE    
  frAtmDlciAccountingEnabled INTEGER
  frAtmDlciAccountingEnd INTEGER
  frAtmDlciCorrelationTag HexString

FrAtmDlciIntEntry  
SEQUENCE    
  frAtmDlciStartTime EnterpriseDateAndTime
  frAtmDlciTotalIngressBytes Unsigned64
  frAtmDlciTotalEgressBytes Unsigned64
  frAtmDlciEirIngressBytes Unsigned64
  frAtmDlciEirEgressBytes Unsigned64
  frAtmDlciDiscardedBytes Unsigned64
  frAtmDlciTotalIngressFrames Unsigned32
  frAtmDlciTotalEgressFrames Unsigned32
  frAtmDlciEirIngressFrames Unsigned32
  frAtmDlciEirEgressFrames Unsigned32
  frAtmDlciDiscardedFrames Unsigned32
  frAtmDlciElapsedDifference Unsigned32

FrAtmDlciSpRowStatusEntry  
SEQUENCE    
  frAtmDlciSpRowStatus RowStatus
  frAtmDlciSpComponentName DisplayString
  frAtmDlciSpStorageType StorageType
  frAtmDlciSpIndex NonReplicated

FrAtmDlciSpProvEntry  
SEQUENCE    
  frAtmDlciSpMaximumFrameSize Unsigned32
  frAtmDlciSpRateEnforcement INTEGER
  frAtmDlciSpCommittedInformationRate Unsigned32
  frAtmDlciSpCommittedBurstSize Unsigned32
  frAtmDlciSpExcessBurstSize Unsigned32
  frAtmDlciSpMeasurementInterval Unsigned32
  frAtmDlciSpEmissionPriorityToIf INTEGER
  frAtmDlciSpEmissionPrioToIf INTEGER
  frAtmDlciSpAccounting INTEGER

FrAtmDlciSiwfRowStatusEntry  
SEQUENCE    
  frAtmDlciSiwfRowStatus RowStatus
  frAtmDlciSiwfComponentName DisplayString
  frAtmDlciSiwfStorageType StorageType
  frAtmDlciSiwfIndex NonReplicated

FrAtmDlciSiwfConnOpEntry  
SEQUENCE    
  frAtmDlciSiwfDiscardPriority INTEGER
  frAtmDlciSiwfAtmServiceCategory INTEGER
  frAtmDlciSiwfTrafficParmConvPolicy INTEGER
  frAtmDlciSiwfAvgFrameSize INTEGER
  frAtmDlciSiwfRemoteAddress AsciiString
  frAtmDlciSiwfRemoteConnectionIdentifier IntegerSequence

FrAtmDlciSiwfSdOpEntry  
SEQUENCE    
  frAtmDlciSiwfMode INTEGER
  frAtmDlciSiwfDeToClpMapping INTEGER
  frAtmDlciSiwfClpToDeMapping INTEGER
  frAtmDlciSiwfFecnToEfciMapping INTEGER
  frAtmDlciSiwfCrToUuMapping INTEGER
  frAtmDlciSiwfTransferPriority INTEGER
  frAtmDlciSiwfAssignedBandwidthPool INTEGER

FrAtmDlciSiwfSiwfSpvcOpEntry  
SEQUENCE    
  frAtmDlciSiwfPeakCellRate0 Unsigned32
  frAtmDlciSiwfPeakCellRate01 Unsigned32
  frAtmDlciSiwfSustainedCellRate0 Unsigned32
  frAtmDlciSiwfSustainedCellRate01 Unsigned32
  frAtmDlciSiwfMaximumBurstSize0 Unsigned32
  frAtmDlciSiwfMaximumBurstSize01 Unsigned32
  frAtmDlciSiwfEquivalentBitRate Unsigned32
  frAtmDlciSiwfType INTEGER
  frAtmDlciSiwfVccClearCause Unsigned32
  frAtmDlciSiwfVccCauseDiag HexString

FrAtmDlciSiwfStatsEntry  
SEQUENCE    
  frAtmDlciSiwfUnknown1490Frames Counter32
  frAtmDlciSiwfInvalid1490Frames Counter32
  frAtmDlciSiwfLastUnknown1490ProtocolHeader HexString
  frAtmDlciSiwfUnknown1483Frames Counter32
  frAtmDlciSiwfInvalid1483Frames Counter32
  frAtmDlciSiwfLastUnknown1483ProtocolHeader HexString

FrAtmDlciSiwfSdRowStatusEntry  
SEQUENCE    
  frAtmDlciSiwfSdRowStatus RowStatus
  frAtmDlciSiwfSdComponentName DisplayString
  frAtmDlciSiwfSdStorageType StorageType
  frAtmDlciSiwfSdIndex NonReplicated

FrAtmDlciSiwfSdProvEntry  
SEQUENCE    
  frAtmDlciSiwfSdMode INTEGER
  frAtmDlciSiwfSdDeToClpMapping INTEGER
  frAtmDlciSiwfSdClpToDeMapping INTEGER
  frAtmDlciSiwfSdFecnToEfciMapping INTEGER
  frAtmDlciSiwfSdCrToUuMapping INTEGER

FrAtmDlciSiwfNPvcRowStatusEntry  
SEQUENCE    
  frAtmDlciSiwfNPvcRowStatus RowStatus
  frAtmDlciSiwfNPvcComponentName DisplayString
  frAtmDlciSiwfNPvcStorageType StorageType
  frAtmDlciSiwfNPvcIndex NonReplicated

FrAtmDlciSiwfNPvcProvEntry  
SEQUENCE    
  frAtmDlciSiwfNPvcAtmConnection Link
  frAtmDlciSiwfNPvcCorrelationTag HexString

FrAtmDlciSiwfNPvcSiwfNpvcOpEntry  
SEQUENCE    
  frAtmDlciSiwfNPvcConnectionToAtm RowPointer

FrAtmDlciSiwfSPvcRowStatusEntry  
SEQUENCE    
  frAtmDlciSiwfSPvcRowStatus RowStatus
  frAtmDlciSiwfSPvcComponentName DisplayString
  frAtmDlciSiwfSPvcStorageType StorageType
  frAtmDlciSiwfSPvcIndex NonReplicated

FrAtmDlciSiwfSPvcProvEntry  
SEQUENCE    
  frAtmDlciSiwfSPvcRemoteAddress AsciiString
  frAtmDlciSiwfSPvcRemoteConnectionIdentifier IntegerSequence
  frAtmDlciSiwfSPvcCorrelationTag HexString

FrAtmDlciSiwfQoSRowStatusEntry  
SEQUENCE    
  frAtmDlciSiwfQoSRowStatus RowStatus
  frAtmDlciSiwfQoSComponentName DisplayString
  frAtmDlciSiwfQoSStorageType StorageType
  frAtmDlciSiwfQoSIndex NonReplicated

FrAtmDlciSiwfQoSProvEntry  
SEQUENCE    
  frAtmDlciSiwfQoSEmissionPriorityToIf INTEGER
  frAtmDlciSiwfQoSTransferPriority INTEGER

FrAtmDlciSiwfAtmConRowStatusEntry  
SEQUENCE    
  frAtmDlciSiwfAtmConRowStatus RowStatus
  frAtmDlciSiwfAtmConComponentName DisplayString
  frAtmDlciSiwfAtmConStorageType StorageType
  frAtmDlciSiwfAtmConIndex NonReplicated

FrAtmDlciSiwfAtmConOperEntry  
SEQUENCE    
  frAtmDlciSiwfAtmConNextHop RowPointer

FrAtmDlciNiwfRowStatusEntry  
SEQUENCE    
  frAtmDlciNiwfRowStatus RowStatus
  frAtmDlciNiwfComponentName DisplayString
  frAtmDlciNiwfStorageType StorageType
  frAtmDlciNiwfIndex NonReplicated

FrAtmDlciNiwfOperEntry  
SEQUENCE    
  frAtmDlciNiwfDeToClpMapping INTEGER
  frAtmDlciNiwfClpToDeMapping INTEGER
  frAtmDlciNiwfTransferPriority Unsigned32
  frAtmDlciNiwfAtmServiceCategory INTEGER
  frAtmDlciNiwfTrafficParmConvPolicy INTEGER
  frAtmDlciNiwfAvgFrameSize INTEGER
  frAtmDlciNiwfEquivalentBitRate Unsigned32
  frAtmDlciNiwfAtmDlci AsciiString
  frAtmDlciNiwfAssignedBandwidthPool INTEGER

FrAtmDlciNiwfSpvcRowStatusEntry  
SEQUENCE    
  frAtmDlciNiwfSpvcRowStatus RowStatus
  frAtmDlciNiwfSpvcComponentName DisplayString
  frAtmDlciNiwfSpvcStorageType StorageType
  frAtmDlciNiwfSpvcIndex NonReplicated

FrAtmDlciNiwfSpvcProvEntry  
SEQUENCE    
  frAtmDlciNiwfSpvcRemoteAddress AsciiString
  frAtmDlciNiwfSpvcRemoteDlci INTEGER
  frAtmDlciNiwfSpvcCorrelationTag HexString

FrAtmDlciNiwfNdRowStatusEntry  
SEQUENCE    
  frAtmDlciNiwfNdRowStatus RowStatus
  frAtmDlciNiwfNdComponentName DisplayString
  frAtmDlciNiwfNdStorageType StorageType
  frAtmDlciNiwfNdIndex NonReplicated

FrAtmDlciNiwfNdProvEntry  
SEQUENCE    
  frAtmDlciNiwfNdDeToClpMapping INTEGER
  frAtmDlciNiwfNdClpToDeMapping INTEGER
  frAtmDlciNiwfNdTransferPriority INTEGER

FrAtmDlciNiwfQoSRowStatusEntry  
SEQUENCE    
  frAtmDlciNiwfQoSRowStatus RowStatus
  frAtmDlciNiwfQoSComponentName DisplayString
  frAtmDlciNiwfQoSStorageType StorageType
  frAtmDlciNiwfQoSIndex NonReplicated

FrAtmDlciNiwfQoSProvEntry  
SEQUENCE    
  frAtmDlciNiwfQoSEmissionPriorityToIf INTEGER
  frAtmDlciNiwfQoSTransferPriority INTEGER

FrAtmDlciEgSpRowStatusEntry  
SEQUENCE    
  frAtmDlciEgSpRowStatus RowStatus
  frAtmDlciEgSpComponentName DisplayString
  frAtmDlciEgSpStorageType StorageType
  frAtmDlciEgSpIndex NonReplicated

FrAtmDlciEgSpProvEntry  
SEQUENCE    
  frAtmDlciEgSpCommittedInformationRate Unsigned32
  frAtmDlciEgSpCommittedBurstSize Unsigned32
  frAtmDlciEgSpExcessBurstSize Unsigned32
  frAtmDlciEgSpMeasurementInterval Unsigned32

FrAtmVFramerRowStatusEntry  
SEQUENCE    
  frAtmVFramerRowStatus RowStatus
  frAtmVFramerComponentName DisplayString
  frAtmVFramerStorageType StorageType
  frAtmVFramerIndex NonReplicated

FrAtmVFramerProvEntry  
SEQUENCE    
  frAtmVFramerOtherVirtualFramer Link
  frAtmVFramerLogicalProcessor Link

FrAtmVFramerStateEntry  
SEQUENCE    
  frAtmVFramerAdminState INTEGER
  frAtmVFramerOperationalState INTEGER
  frAtmVFramerUsageState INTEGER

FrAtmVFramerStatsEntry  
SEQUENCE    
  frAtmVFramerFrmToOtherVFramer PassportCounter64
  frAtmVFramerFrmFromOtherVFramer PassportCounter64
  frAtmVFramerOctetFromOtherVFramer PassportCounter64

FrAtmAddrRowStatusEntry  
SEQUENCE    
  frAtmAddrRowStatus RowStatus
  frAtmAddrComponentName DisplayString
  frAtmAddrStorageType StorageType
  frAtmAddrIndex NonReplicated

FrAtmAddrProvEntry  
SEQUENCE    
  frAtmAddrAddress AsciiString

FrAtmAddrAddrOpEntry  
SEQUENCE    
  frAtmAddrMyAddress AsciiString

FrAtmCaRowStatusEntry  
SEQUENCE    
  frAtmCaRowStatus RowStatus
  frAtmCaComponentName DisplayString
  frAtmCaStorageType StorageType
  frAtmCaIndex NonReplicated

FrAtmCaProvEntry  
SEQUENCE    
  frAtmCaCallAdmissionControl INTEGER
  frAtmCaOverrideLinkRate Unsigned32

FrAtmCaSdEntry  
SEQUENCE    
  frAtmCaSdMode INTEGER
  frAtmCaSdDeToClpMapping INTEGER
  frAtmCaSdClpToDeMapping INTEGER
  frAtmCaSdFecnToEfciMapping INTEGER
  frAtmCaSdCrToUuMapping INTEGER

FrAtmCaNdEntry  
SEQUENCE    
  frAtmCaNdDeToClpMapping INTEGER
  frAtmCaNdClpToDeMapping INTEGER

FrAtmCaIfQoSEntry  
SEQUENCE    
  frAtmCaSiwfEmissionPriorityToIf INTEGER
  frAtmCaSiwfTransferPriority INTEGER
  frAtmCaNiwfEmissionPriorityToIf INTEGER
  frAtmCaNiwfTransferPriority INTEGER

FrAtmCaOpEntry  
SEQUENCE    
  frAtmCaLinkRate Unsigned32
  frAtmCaNailedUpPvcs Gauge32
  frAtmCaTroubledDlcis Gauge32
  frAtmCaSoftPvcs Gauge32

FrAtmCaAccountingOptionsEntry  
SEQUENCE    
  frAtmCaAccountClass Unsigned32
  frAtmCaAccountCollection OCTET STRING
  frAtmCaServiceExchange Unsigned32

FrAtmCaBwPoolEntry  
SEQUENCE    
  frAtmCaBwPoolIndex Integer32
  frAtmCaBwPoolValue Unsigned32

FrAtmCaPoolProvBwEntry  
SEQUENCE    
  frAtmCaPoolProvBwIndex Integer32
  frAtmCaPoolProvBwValue Gauge32

FrAtmCaPoolAvailBwEntry  
SEQUENCE    
  frAtmCaPoolAvailBwIndex Integer32
  frAtmCaPoolAvailBwValue Gauge32

FrAtmCaPoolAdmitBwEntry  
SEQUENCE    
  frAtmCaPoolAdmitBwIndex Integer32
  frAtmCaPoolAdmitBwValue Gauge32

FrAtmCaTpmRowStatusEntry  
SEQUENCE    
  frAtmCaTpmRowStatus RowStatus
  frAtmCaTpmComponentName DisplayString
  frAtmCaTpmStorageType StorageType
  frAtmCaTpmIndex Integer32

FrAtmCaTpmProvEntry  
SEQUENCE    
  frAtmCaTpmAssignedBandwidthPool INTEGER
  frAtmCaTpmTrafficParmConvPolicy INTEGER
  frAtmCaTpmAverageFrameSize INTEGER

Defined Values

frameRelayAtmMIB 1.3.6.1.4.1.562.2.4.2.51
OBJECT IDENTIFIER    

frAtm 1.3.6.1.4.1.562.2.4.1.72
OBJECT IDENTIFIER    

frAtmRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.1
This entry controls the addition and deletion of frAtm components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmRowStatusEntry

frAtmRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.1.1
A single entry in the table represents a single frAtm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmRowStatusEntry  

frAtmRowStatus 1.3.6.1.4.1.562.2.4.1.72.1.1.1
This variable is used as the basis for SNMP naming of frAtm components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmComponentName 1.3.6.1.4.1.562.2.4.1.72.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmStorageType 1.3.6.1.4.1.562.2.4.1.72.1.1.4
This variable represents the storage type value for the frAtm tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmIndex 1.3.6.1.4.1.562.2.4.1.72.1.1.10
This variable represents the index for the frAtm tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

frAtmCidDataTable 1.3.6.1.4.1.562.2.4.1.72.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCidDataEntry

frAtmCidDataEntry 1.3.6.1.4.1.562.2.4.1.72.10.1
An entry in the frAtmCidDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCidDataEntry  

frAtmCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.72.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

frAtmStateTable 1.3.6.1.4.1.562.2.4.1.72.11
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmStateEntry

frAtmStateEntry 1.3.6.1.4.1.562.2.4.1.72.11.1
An entry in the frAtmStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmStateEntry  

frAtmAdminState 1.3.6.1.4.1.562.2.4.1.72.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

frAtmOperationalState 1.3.6.1.4.1.562.2.4.1.72.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

frAtmUsageState 1.3.6.1.4.1.562.2.4.1.72.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

frAtmAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.72.11.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

frAtmProceduralStatus 1.3.6.1.4.1.562.2.4.1.72.11.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

frAtmControlStatus 1.3.6.1.4.1.562.2.4.1.72.11.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

frAtmAlarmStatus 1.3.6.1.4.1.562.2.4.1.72.11.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

frAtmStandbyStatus 1.3.6.1.4.1.562.2.4.1.72.11.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

frAtmUnknownStatus 1.3.6.1.4.1.562.2.4.1.72.11.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

frAtmStatsTable 1.3.6.1.4.1.562.2.4.1.72.12
FrUni/n Statistics This group contains the statistics about the operational behavior of the service at the interface level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmStatsEntry

frAtmStatsEntry 1.3.6.1.4.1.562.2.4.1.72.12.1
An entry in the frAtmStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmStatsEntry  

frAtmLastUnknownDlci 1.3.6.1.4.1.562.2.4.1.72.12.1.1
This attribute identifies the most recent DLCI which user frames were received on for which a DLCI has not been provisioned on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1023  

frAtmUnknownDlciFramesFromIf 1.3.6.1.4.1.562.2.4.1.72.12.1.2
This attribute contains a count of the number of frames received from the interface with an unknown DLCI (DLCI which is not provisioned). When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmInvalidHeaderFramesFromIf 1.3.6.1.4.1.562.2.4.1.72.12.1.3
This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmIfEntryTable 1.3.6.1.4.1.562.2.4.1.72.13
This group contains the provisionable attributes for the ifEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmIfEntryEntry

frAtmIfEntryEntry 1.3.6.1.4.1.562.2.4.1.72.13.1
An entry in the frAtmIfEntryTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmIfEntryEntry  

frAtmIfAdminStatus 1.3.6.1.4.1.562.2.4.1.72.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

frAtmIfIndex 1.3.6.1.4.1.562.2.4.1.72.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

frAtmOperStatusTable 1.3.6.1.4.1.562.2.4.1.72.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmOperStatusEntry

frAtmOperStatusEntry 1.3.6.1.4.1.562.2.4.1.72.14.1
An entry in the frAtmOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmOperStatusEntry  

frAtmSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.72.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

frAtmEmissionPriorityQsTable 1.3.6.1.4.1.562.2.4.1.72.15
This group contains the provisionable attribute to specifie the number of Frame Relay egress emission priority queues to be used on that Frame Relay Interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmEmissionPriorityQsEntry

frAtmEmissionPriorityQsEntry 1.3.6.1.4.1.562.2.4.1.72.15.1
An entry in the frAtmEmissionPriorityQsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmEmissionPriorityQsEntry  

frAtmNumberOfEmissionQs 1.3.6.1.4.1.562.2.4.1.72.15.1.1
This attribute specifies the number of egress emission priority queues that will be used for that Frame Relay interface. The possible values of this attribute are 2 or 4: For V.35, V.11, HSSI, E1, DS1, E3, DS3 or 8pDS1 the possible values are: 2 (in which case they are hardware queues), or 4 (in which case they are software queues). For DS1C, E1C or DS3C the possible values are 2, 4 (in all cases they are software queues).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 2 | 4  

frAtmFrmToIfByQueueTable 1.3.6.1.4.1.562.2.4.1.72.341
This attribute counts the total number of frames transmitted to the interface per egress emission priority queue since the component has been activated. There is potientially a maximum of 4 emission priority queues. The number of available egress queues varies according to the value of the provisionable attribute numberOfEmissionQs. Egress queue 0 has the lowest priority, while egress queue 3 has the highest priority. The queue values are only indicated when the numberOfEmissionQs is set to 4 queues.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmFrmToIfByQueueEntry

frAtmFrmToIfByQueueEntry 1.3.6.1.4.1.562.2.4.1.72.341.1
An entry in the frAtmFrmToIfByQueueTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmFrmToIfByQueueEntry  

frAtmFrmToIfByQueueIndex 1.3.6.1.4.1.562.2.4.1.72.341.1.1
This variable represents the index for the frAtmFrmToIfByQueueTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

frAtmFrmToIfByQueueValue 1.3.6.1.4.1.562.2.4.1.72.341.1.2
This variable represents an individual value for the frAtmFrmToIfByQueueTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmOctetToIfByQueueTable 1.3.6.1.4.1.562.2.4.1.72.342
This attribute counts the total number of octets transmitted from the service to the interface per emission priority queue since the component has been activated. There is potientially a maximum of 4 emission priority queues. The number of available egress queues varies according to the value of the provisionable attribute numberOfEmissionQs. Egress queue 0 has the lowest priority, while egress queue 3 has the highest priority.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmOctetToIfByQueueEntry

frAtmOctetToIfByQueueEntry 1.3.6.1.4.1.562.2.4.1.72.342.1
An entry in the frAtmOctetToIfByQueueTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmOctetToIfByQueueEntry  

frAtmOctetToIfByQueueIndex 1.3.6.1.4.1.562.2.4.1.72.342.1.1
This variable represents the index for the frAtmOctetToIfByQueueTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

frAtmOctetToIfByQueueValue 1.3.6.1.4.1.562.2.4.1.72.342.1.2
This variable represents an individual value for the frAtmOctetToIfByQueueTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmFramer 1.3.6.1.4.1.562.2.4.1.72.2
OBJECT IDENTIFIER    

frAtmFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.2.1
This entry controls the addition and deletion of frAtmFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmFramerRowStatusEntry

frAtmFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.2.1.1
A single entry in the table represents a single frAtmFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmFramerRowStatusEntry  

frAtmFramerRowStatus 1.3.6.1.4.1.562.2.4.1.72.2.1.1.1
This variable is used as the basis for SNMP naming of frAtmFramer components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmFramerComponentName 1.3.6.1.4.1.562.2.4.1.72.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmFramerStorageType 1.3.6.1.4.1.562.2.4.1.72.2.1.1.4
This variable represents the storage type value for the frAtmFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmFramerIndex 1.3.6.1.4.1.562.2.4.1.72.2.1.1.10
This variable represents the index for the frAtmFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmFramerProvTable 1.3.6.1.4.1.562.2.4.1.72.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmFramerProvEntry

frAtmFramerProvEntry 1.3.6.1.4.1.562.2.4.1.72.2.10.1
An entry in the frAtmFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmFramerProvEntry  

frAtmFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.72.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

frAtmFramerLinkTable 1.3.6.1.4.1.562.2.4.1.72.2.11
This group contains attributes defining the framing of data on the link interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmFramerLinkEntry

frAtmFramerLinkEntry 1.3.6.1.4.1.562.2.4.1.72.2.11.1
An entry in the frAtmFramerLinkTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmFramerLinkEntry  

frAtmFramerFlagsBetweenFrames 1.3.6.1.4.1.562.2.4.1.72.2.11.1.4
This attribute defines the number of flags that are inserted between frames sent to the link interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

frAtmFramerStateTable 1.3.6.1.4.1.562.2.4.1.72.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmFramerStateEntry

frAtmFramerStateEntry 1.3.6.1.4.1.562.2.4.1.72.2.12.1
An entry in the frAtmFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmFramerStateEntry  

frAtmFramerAdminState 1.3.6.1.4.1.562.2.4.1.72.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

frAtmFramerOperationalState 1.3.6.1.4.1.562.2.4.1.72.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

frAtmFramerUsageState 1.3.6.1.4.1.562.2.4.1.72.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

frAtmFramerStatsTable 1.3.6.1.4.1.562.2.4.1.72.2.13
This group contains the operational statistics data for a Framer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmFramerStatsEntry

frAtmFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.72.2.13.1
An entry in the frAtmFramerStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmFramerStatsEntry  

frAtmFramerFrmToIf 1.3.6.1.4.1.562.2.4.1.72.2.13.1.1
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerFrmFromIf 1.3.6.1.4.1.562.2.4.1.72.2.13.1.2
The number of frames received from the link interface by Framer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerOctetFromIf 1.3.6.1.4.1.562.2.4.1.72.2.13.1.3
The number of bytes received from the link interface by Framer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerAborts 1.3.6.1.4.1.562.2.4.1.72.2.13.1.4
This attribute is the total number of aborts received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerCrcErrors 1.3.6.1.4.1.562.2.4.1.72.2.13.1.5
This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.72.2.13.1.6
This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerNonOctetErrors 1.3.6.1.4.1.562.2.4.1.72.2.13.1.7
This attribute is the total number of frames that were non octet aligned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerOverruns 1.3.6.1.4.1.562.2.4.1.72.2.13.1.8
This attribute is the total number of frames received from the link for which overruns occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerUnderruns 1.3.6.1.4.1.562.2.4.1.72.2.13.1.9
This attribute is the total number of frames transmitted to the link for which underruns occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerLargeFrmErrors 1.3.6.1.4.1.562.2.4.1.72.2.13.1.10
This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerFrmModeErrors 1.3.6.1.4.1.562.2.4.1.72.2.13.1.11
This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified framingType, that is when interrupting frames are used while running in hdlc mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmFramerUtilTable 1.3.6.1.4.1.562.2.4.1.72.2.14
This group contains the link utilizaiton operational data for a Framer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmFramerUtilEntry

frAtmFramerUtilEntry 1.3.6.1.4.1.562.2.4.1.72.2.14.1
An entry in the frAtmFramerUtilTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmFramerUtilEntry  

frAtmFramerNormPrioLinkUtilToIf 1.3.6.1.4.1.562.2.4.1.72.2.14.1.1
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

frAtmFramerNormPrioLinkUtilFromIf 1.3.6.1.4.1.562.2.4.1.72.2.14.1.3
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

frAtmLmi 1.3.6.1.4.1.562.2.4.1.72.3
OBJECT IDENTIFIER    

frAtmLmiRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.3.1
This entry controls the addition and deletion of frAtmLmi components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmLmiRowStatusEntry

frAtmLmiRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.3.1.1
A single entry in the table represents a single frAtmLmi component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmLmiRowStatusEntry  

frAtmLmiRowStatus 1.3.6.1.4.1.562.2.4.1.72.3.1.1.1
This variable is used as the basis for SNMP naming of frAtmLmi components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

frAtmLmiComponentName 1.3.6.1.4.1.562.2.4.1.72.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmLmiStorageType 1.3.6.1.4.1.562.2.4.1.72.3.1.1.4
This variable represents the storage type value for the frAtmLmi tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmLmiIndex 1.3.6.1.4.1.562.2.4.1.72.3.1.1.10
This variable represents the index for the frAtmLmi tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmLmiParmsTable 1.3.6.1.4.1.562.2.4.1.72.3.10
This group contains the provisionable attributes of the LMI component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmLmiParmsEntry

frAtmLmiParmsEntry 1.3.6.1.4.1.562.2.4.1.72.3.10.1
An entry in the frAtmLmiParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmLmiParmsEntry  

frAtmLmiProcedures 1.3.6.1.4.1.562.2.4.1.72.3.10.1.1
This attribute selects the procedures to be used for the Local Management Interface. The following procedures are supported: none: no Local Management Interface procedures are running on this interface. This accommodates Frame Relay user equipment that has not implemented any LMI procedures. The remaining attributes of this group are ignored. vendorForum: Local Management Interface procedures from the Vendor Forum specification are supported on this interface. DLCI 1023 is used for the LMI protocol. This value cannot be used if the side attribute is both. ansi: Local Management Interface procedures from the ANSI specification are supported. DLCI 0 is used for the LMI protocol. itu: Local Management Interface procedures from the ITU-T specification are supported. DLCI 0 is used for the LMI protocol. Was previously ccitt. autoConfigure: The interface determines automatically which Local Management Interface procedures to use. This value cannot be used if the side attribute is user. The procedures currently in use can be seen in the operational attribute opProcedures.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), vendorForum(1), ansi(2), itu(3), autoConfigure(4)  

frAtmLmiAsyncStatusReport 1.3.6.1.4.1.562.2.4.1.72.3.10.1.2
This attribute selects the use of asynchronous PVC status report procedures as specified in ANSI, CCITT, and Vendor Forum. This attribute can be set to on or off. If procedures is set to none, this attribute is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

frAtmLmiErrorEventThreshold 1.3.6.1.4.1.562.2.4.1.72.3.10.1.3
An event is defined as follows: (1) receipt of a STATUS ENQUIRY message; or (2) expiration of timer T392. An error event is (1) nonreceipt of STATUS ENQUIRY in T392 seconds; (2) invalid contents of a LMI message; (3) invalid receive sequence number. This attribute specifies the number of error events which, if they occur within eventCount events, cause a protocol error condition. The condition is cleared after eventCount sequential correct events occur. This attribute corresponds to the nN2 parameter described in the Vendor Forum Specification. It must be less than or equal to eventCount.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

frAtmLmiEventCount 1.3.6.1.4.1.562.2.4.1.72.3.10.1.4
This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. This attribute corresponds to the nN3 parameter described in the Vendor Forum Specification. It must be greater than or equal to errorEventThreshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

frAtmLmiCheckPointTimer 1.3.6.1.4.1.562.2.4.1.72.3.10.1.5
This attribute selects the time (in seconds) within which a STATUS ENQUIRY message is expected. This attribute corresponds to the nT2 parameter described in the Vendor Forum Specification. It must be less than messageCountTimer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 5 | 10 | 15 | 20 | 25 | 30  

frAtmLmiMessageCountTimer 1.3.6.1.4.1.562.2.4.1.72.3.10.1.6
This attribute selects the time (in seconds) within which at most five (this is a fixed value and corresponds to maximum message count in VendorForum) STATUS ENQUIRY messages are expected. This attribute applies only when the lmiProcedures is set to vendorForum. messageCountTimer must always be greater than checkPointTimer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 5 | 10 | 15 | 20 | 25 | 30  

frAtmLmiIgnoreActiveBit 1.3.6.1.4.1.562.2.4.1.72.3.10.1.7
This attribute specifies whether the Frame Relay LMI Active Bit (A-bit) has a bearing on the transfer of user data across this Frame Relay interface for both directions of traffic flow. When this attribute is set to yes, the A-bit status of a user DLCI connection does not affect data transfer. When this attribute is set to no, data received from the local interface will be discarded if an A-bit =0 condition exists towards the local user. Data being sent to the local interface is discarded if an A-bit = 0 condition exists towards the subnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

frAtmLmiSide 1.3.6.1.4.1.562.2.4.1.72.3.10.1.8
This attribute can be set to user, network, or both. When this attribute is set to user, USP LMI procedures are running. When this attribute is set to network, NSP LMI procedures are running. When this attribute is set to both, USPNSP LMI procedures are running. When the value is both, the procedures attribute must not be set to vendorForum. Setting the value to user when the procedures attribute is set to autoConfigure is disallowed semantically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(0), user(1), both(2)  

frAtmLmiPvcConfigParmsInFsr 1.3.6.1.4.1.562.2.4.1.72.3.10.1.9
When this attribute is set to yes, additional Q.933 information elements are included in the LMI Full Status message to facilitate CPE PVC parameter configuring. When set to yes, the Check Prov command fails if the Lmi side is not set to network. When set to yes, Check Prov fails if the number of DLCIs on the FrUni is greater than 300. If the service is not a FrUni this attribute is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

frAtmLmiStateTable 1.3.6.1.4.1.562.2.4.1.72.3.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmLmiStateEntry

frAtmLmiStateEntry 1.3.6.1.4.1.562.2.4.1.72.3.11.1
An entry in the frAtmLmiStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmLmiStateEntry  

frAtmLmiAdminState 1.3.6.1.4.1.562.2.4.1.72.3.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

frAtmLmiOperationalState 1.3.6.1.4.1.562.2.4.1.72.3.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

frAtmLmiUsageState 1.3.6.1.4.1.562.2.4.1.72.3.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

frAtmLmiPsiTable 1.3.6.1.4.1.562.2.4.1.72.3.12
This group provides the protocol status of the Local Management Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmLmiPsiEntry

frAtmLmiPsiEntry 1.3.6.1.4.1.562.2.4.1.72.3.12.1
An entry in the frAtmLmiPsiTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmLmiPsiEntry  

frAtmLmiProtocolStatus 1.3.6.1.4.1.562.2.4.1.72.3.12.1.1
This attribute indicates whether the LMI is in an error condition or whether the LMI procedures are behaving normally. When operating with no LMI protocol, this attribute is always set to normalCondition. When operating with LMI procedures, this attribute is set to errorCondition after n392 of the last n393 events are in error. The consequence of an errorCondition is that all DLCIs on this interface will become inactive in both directions. The errorCondition is cleared and a normalCondition is indicated when a sufficient number of events have occurred without error. In ANSI, this occurs when n393 consecutive good events take place. If the procedures attribute is set to autoConfigure, this attribute is set to configuring while adaptive LMI determines which LMI procedures are running on the link. A single LMI error event during auto configuration causes the attribute value to change to errorCondition. If during configuring no LMI message is received, an LMI errorCondition is raised after n392 x t392 seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER errorCondition(0), normalCondition(1), configuring(2)  

frAtmLmiOpProcedures 1.3.6.1.4.1.562.2.4.1.72.3.12.1.2
The opProcedures attribute indicates the procedures being used for the Local Management Interface. This attribute should be ignored if protocolStatus is not normalCondition. The following procedures are supported: none: Local Management Interface procedures are not running on this interface. This accommodates Frame Relay user equipment that has not implemented any LMI procedures. vendorForum: Local Management Interface procedures from the Vendor Forum specification are running on this interface. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedures from the ANSI specification are running. DLCI 0 is used for the LMI protocol. itu: Local Management Interface procedures from the ITU-T specification are running. DLCI 0 is used for the LMI protocol. Was previously ccitt. unknown: Local Management Interface procedures have yet to be determined by Adaptive LMI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), vendorForum(1), ansi(2), itu(3), unknown(4)  

frAtmLmiStatsTable 1.3.6.1.4.1.562.2.4.1.72.3.13
This group contains the operational statistics for the Frame Relay Local Management Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmLmiStatsEntry

frAtmLmiStatsEntry 1.3.6.1.4.1.562.2.4.1.72.3.13.1
An entry in the frAtmLmiStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmLmiStatsEntry  

frAtmLmiKeepAliveStatusToIf 1.3.6.1.4.1.562.2.4.1.72.3.13.1.1
This attribute counts the number of Local Management Interface keep alive status messages sent to the external user device in response to a status enquiry for keep alive status. When the maximum count is exceeded it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiFullStatusToIf 1.3.6.1.4.1.562.2.4.1.72.3.13.1.2
This attribute counts the number of Local Management Interface full status messages sent to the external user device in response to a status enquiry for keep alive or full status. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiKeepAliveStatusEnqFromIf 1.3.6.1.4.1.562.2.4.1.72.3.13.1.3
This attribute counts the number of Local Management Interface valid keep alive status enquiry messages received from the external user device. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiFullStatusEnqFromIf 1.3.6.1.4.1.562.2.4.1.72.3.13.1.4
This attribute counts the number of Local Management Interface valid full status enquiry messages received from the external user device. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiNetworkSideEventHistory 1.3.6.1.4.1.562.2.4.1.72.3.13.1.5
This attribute displays the Local Management Interface network side procedure event history in order of occurrence. An event is represented by a single symbol. A '+' symbol indicates a good event. An 'X' symbol indicates a protocol error event. The leftmost event is the most recent to occur. The provisioned eventCount (nN3/ N393) dictates the maximum number of events displayed. A good event is triggered by receipt of a valid status enquiry message. An error event is one of three possibilities, either a nT2/T392 timer expiry, receipt of a status enquiry message with bad sequence numbers, or when lmiProcedures is provisioned to vendorForum and we receive more than nN4 status enquiry messages within the provisioned messageCountTimer (nT3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..10)  

frAtmLmiProtocolErrors 1.3.6.1.4.1.562.2.4.1.72.3.13.1.6
This attribute counts the number of Local Management Interface protocol errors. It is the sum of the sequence (sequenceErrors), timeout (pollingVerifTimeouts) and too many status enquiry messages received within the messageCountTimer (nT3) errors. The too many status enquiries error only applies when lmiProcedures is set to vendorForum. When the maximum count is exceeded it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiUnexpectedIes 1.3.6.1.4.1.562.2.4.1.72.3.13.1.7
This attribute counts the number of Local Management Interface frames received with an Information Element identifier that is unknown or unexpected. An unexpected Information Element is not a protocol error. When the maximum count is reached, this counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiSequenceErrors 1.3.6.1.4.1.562.2.4.1.72.3.13.1.8
This attribute counts the number of Local Management Interface Status Enquiry message sequence errors. A sequence error is receipt of a Status Enquiry message with a receive sequence number not equal to the last send sequence number. When the maximum count is reached the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiUnexpectedReports 1.3.6.1.4.1.562.2.4.1.72.3.13.1.9
This attribute counts the number of Local Management Interface frames received with an unknown or unexpected report type. An unexpected report type is not a protocol error. When the maximum count is reached the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiPollingVerifTimeouts 1.3.6.1.4.1.562.2.4.1.72.3.13.1.10
This attribute counts the number of checkPointTImer (t392) timer expiries occurring on the Local Management Interface. When the maximum count is reached the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiKeepAliveEnqToIf 1.3.6.1.4.1.562.2.4.1.72.3.13.1.11
This attribute counts the number of Local Management Interface keep alive enquiry status messages sent to the external user device for keep alive status. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiFullStatusEnqToIf 1.3.6.1.4.1.562.2.4.1.72.3.13.1.12
This attribute counts the number of Local Management Interface full status messages sent to the external user device in response to a status enquiry for keep alive or full status. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiUserSideEventHistory 1.3.6.1.4.1.562.2.4.1.72.3.13.1.13
This attribute displays the Local Management Interface user side procedure event history in order of occurrence. An event is represented by a single symbol. A '+' symbol indicates a good event. An 'X' symbol indicates a protocol error event. The left most event is the most recent to occur. The provisioned eventCount (nN3/ N393) dictates the maximum number of events displayed. A good event is triggered by receipt of a valid status message. An error event is either a nT1/T391 timer expiry or receipt of a status message with bad sequence numbers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..10)  

frAtmLmiStatusSequenceErrors 1.3.6.1.4.1.562.2.4.1.72.3.13.1.14
This attribute counts the number of Local Management Interface Status message sequence errors. A sequence error is receipt of a Status message with a receive sequence number not equal to the last send sequence number. When the maximum count is reached the counter wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiNoStatusReportCount 1.3.6.1.4.1.562.2.4.1.72.3.13.1.15
This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented in two cases: i) after a status enquiry is sent out and T391 timer expires without having a status report received. ii) an invalid status report is received. When the maximum count is reached it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmLmiUspParmsTable 1.3.6.1.4.1.562.2.4.1.72.3.14
This group contains the provisionable attributes of the Local Management Interface user side procedure.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmLmiUspParmsEntry

frAtmLmiUspParmsEntry 1.3.6.1.4.1.562.2.4.1.72.3.14.1
An entry in the frAtmLmiUspParmsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmLmiUspParmsEntry  

frAtmLmiFullStatusPollingCycles 1.3.6.1.4.1.562.2.4.1.72.3.14.1.1
This attribute specifies how frequently the Frame Relay UNI service should initiate a Status Enquiry for a full PVC status report. A polling cycle is a Status Enquiry and Status Report exchange. This attribute is used only if the side attribute is either user or both.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

frAtmLmiLinkVerificationTimer 1.3.6.1.4.1.562.2.4.1.72.3.14.1.2
This attribute specifies how frequently the Frame Relay UNI service should initiate a Status Enquiry for link integrity verification. It must be less than checkPointTimer (t392). When the Lmi side is network, this attribute is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 5 | 10 | 15 | 20 | 25 | 30  

frAtmDlci 1.3.6.1.4.1.562.2.4.1.72.4
OBJECT IDENTIFIER    

frAtmDlciRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.1
This entry controls the addition and deletion of frAtmDlci components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciRowStatusEntry

frAtmDlciRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.1.1
A single entry in the table represents a single frAtmDlci component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciRowStatusEntry  

frAtmDlciRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlci components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciComponentName 1.3.6.1.4.1.562.2.4.1.72.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciStorageType 1.3.6.1.4.1.562.2.4.1.72.4.1.1.4
This variable represents the storage type value for the frAtmDlci tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciIndex 1.3.6.1.4.1.562.2.4.1.72.4.1.1.10
This variable represents the index for the frAtmDlci tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 16..1007  

frAtmDlciStateTable 1.3.6.1.4.1.562.2.4.1.72.4.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciStateEntry

frAtmDlciStateEntry 1.3.6.1.4.1.562.2.4.1.72.4.10.1
An entry in the frAtmDlciStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciStateEntry  

frAtmDlciAdminState 1.3.6.1.4.1.562.2.4.1.72.4.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

frAtmDlciOperationalState 1.3.6.1.4.1.562.2.4.1.72.4.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

frAtmDlciUsageState 1.3.6.1.4.1.562.2.4.1.72.4.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

frAtmDlciABitTable 1.3.6.1.4.1.562.2.4.1.72.4.11
This group contains the A-Bit status information for this Data Link Connection Identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciABitEntry

frAtmDlciABitEntry 1.3.6.1.4.1.562.2.4.1.72.4.11.1
An entry in the frAtmDlciABitTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciABitEntry  

frAtmDlciABitStatusToIf 1.3.6.1.4.1.562.2.4.1.72.4.11.1.1
This attribute contains the most recent A-bit status sent to the interface. The A-bit status is part of the LMI protocol, and indicates the remote end's willingness to accept data from the local interface. When an inactive setting is sent out, the Frame Relay service will discard any data offered from the local interface. When an active setting is sent out, the Frame Relay service tries to process all data offered from the local interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1), notApplicable(2)  

frAtmDlciABitReasonToIf 1.3.6.1.4.1.562.2.4.1.72.4.11.1.2
This attribute provides the reason (if any) for an inactive status to be sent to the interface. This reason is notApplicable for an active status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), remoteUserSignaled(1), localLmiError(2), remoteLmiError(3), localLinkDown(4), remoteLinkDown(5), pvcDown(6)  

frAtmDlciABitStatusFromIf 1.3.6.1.4.1.562.2.4.1.72.4.11.1.3
This attribute indicates the most recent A-Bit status received from the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1), notApplicable(2)  

frAtmDlciABitReasonFromIf 1.3.6.1.4.1.562.2.4.1.72.4.11.1.4
This attribute provides the reason (if any) for an inactive status to be sent to the subnet. The value is notApplicable when the aBitStatusFromIf attribute is active. The value is remoteUserSignaled if the remote interface originating the A-Bit status detects that the virtual circuit is down at the remote network through the LMI protocol. The remote interface must be running network site LMI protocol for this A-Bit status reason to be sent. The value is localLmiError if the LMI protocol is down at this interface. The value is localLinkDown if the physical link is disabled at this interface. The value is pvcDown if no A-Bit status has been sent to this interface from the local network. The value is missingFromLmiReport if the remote interface did not provide a reason along with the inactive A-Bit status. DESCRIPTION
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), remoteUserSignaled(1), localLmiError(2), localLinkDown(4), pvcDown(6), missingFromLmiReport(7)  

frAtmDlciSpOpTable 1.3.6.1.4.1.562.2.4.1.72.4.12
This group contains service parameters for the Dlci component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSpOpEntry

frAtmDlciSpOpEntry 1.3.6.1.4.1.562.2.4.1.72.4.12.1
An entry in the frAtmDlciSpOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSpOpEntry  

frAtmDlciMaximumFrameSize 1.3.6.1.4.1.562.2.4.1.72.4.12.1.1
This attribute indicates the maximum number of octets which can be included in the information field. This definition does not include the FrameRelay header and CRC octets. This attribute corresponds to the dN1 parameter described in the Vendor Forum Specification.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8187  

frAtmDlciRateEnforcement 1.3.6.1.4.1.562.2.4.1.72.4.12.1.2
This attribute indicates whether rate enforcement is in effect for this user Data Link Connection on this FrAtm interface. When rate enforcement is on, Committed Information Rate (CIR) and DE=1 traffic will be measured and enforced. When rate enforcement is off, all frames from the user will be accepted and no modifications to the frame with respect to the DE bit will be made.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

frAtmDlciCommittedInformationRate 1.3.6.1.4.1.562.2.4.1.72.4.12.1.3
This attribute indicates the committed information rate (CIR) in bits per second (bit/s) and represents the rate at which the network agrees to transfer information under normal conditions when rateEnforcement is on. This rate is measured over a measurement interval (t). This attribute is not applicable when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciCommittedBurstSize 1.3.6.1.4.1.562.2.4.1.72.4.12.1.4
This attribute indicates the committed burst size (Bc) in bits and represents the amount of data that a network agrees to transfer under normal conditions over a measurement interval (t) when rateEnforcement is on. Data marked with DE=1 is not accounted for in committed burst size. This attribute is not applicable when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciExcessBurstSize 1.3.6.1.4.1.562.2.4.1.72.4.12.1.5
This attribute indicates the excess burst size (Be) in bits and represents the amount of uncommitted data that the network attempts to deliver over measurement interval (t) when rateEnforcement is on. Data marked DE=1 by the user or by the network is accounted for here. This attribute is not applicable ignored when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciMeasurementInterval 1.3.6.1.4.1.562.2.4.1.72.4.12.1.6
This attribute indicates the time interval over which rates and burst sizes are measured. This attribute is not applicable when rateEnforcement is off.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciEmissionPriorityToIf 1.3.6.1.4.1.562.2.4.1.72.4.12.1.7
This attribute indicates the emission priority of frames sent to the interface. If the value of FrAtm/n numberOfEmissionQs is 2, set the value of this attribute to either 0 or 1; if the value of FrAtm/n numberOfEmissionQs is 4, set the value of this attribute to one of 0, 1, 2, 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 1 | 2 | 3  

frAtmDlciDlciType 1.3.6.1.4.1.562.2.4.1.72.4.12.1.8
This attribute indicates the type of DLCI. A value of serviceInterworking indicates that a FrAtm/n Dlci/n Siwf component is present. A value of networkInterworking indicates that a FrAtm/n Dlci/n Niwf component is present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER serviceInterworking(0), networkInterworking(1)  

frAtmDlciTroubled 1.3.6.1.4.1.562.2.4.1.72.4.12.1.9
This attribute indicates whether or not the connection is in a troubled state. Connections may become troubled for the following reasons; if CAC failed to admit the call, or if one of the attributes aBitStatusToIf, aBitStatusFromIf goes inactive; otherwise it is set to no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

frAtmDlciTroubledReason 1.3.6.1.4.1.562.2.4.1.72.4.12.1.10
This attribute provides the reason (if any) for a troubled connection. A value of notApplicable indicates no current failures; either Connection Admission Control (CAC) is off, or call was admitted. A value of notAdmitted indicates the CAC algorithm fails to admit this connection. Check if there is a sufficient bandwidth allocation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), notAdmitted(1)  

frAtmDlciStatsTable 1.3.6.1.4.1.562.2.4.1.72.4.13
This group contains the operational statistics for the Frame Relay Data Link Connection Identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciStatsEntry

frAtmDlciStatsEntry 1.3.6.1.4.1.562.2.4.1.72.4.13.1
An entry in the frAtmDlciStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciStatsEntry  

frAtmDlciFrmToIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.1
This attribute counts the number of frames sent to the interface. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciFecnFrmToIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.2
This attribute counts the number of frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciBecnFrmToIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.3
This attribute counts the number of frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDeFrmToIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.4
This attribute counts the number of frames sent to the interface with the Discard Eligibility (DE) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscCongestedToIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.5
This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the interface. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscDeCongestedToIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.6
This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion in the direction toward the interface. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciFrmFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.7
This attribute counts the number of frames received from the interface. Frames that are discarded due to error or excess are not counted. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciFecnFrmFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.8
This attribute counts the number of frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciBecnFrmFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.9
This attribute counts the number of frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciEfciFrmFromNetwork 1.3.6.1.4.1.562.2.4.1.72.4.13.1.10
This attribute counts the number of frames received from the interworking function with the Explicit Forward Congestion Indication (EFCI) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDeFrmFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.11
This attribute counts the number of frames received from the interface with the Discard Eligibility (DE) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciExcessFrmFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.12
This attribute counts the number of frames received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforcement. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscExcessFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.13
This attribute counts the number of frames which were discarded due to rate enforcement. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscFrameAbit 1.3.6.1.4.1.562.2.4.1.72.4.13.1.14
This attribute counts the number of frame discards at the Frame Relay Service, due to an inactive PVC status, in the direction toward the interworking function. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscCongestedFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.15
This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the interworking function. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscDeCongestedFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.16
This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set due to local congestion in the direction toward the interworking function. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciErrorShortFrmFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.17
This attribute counts the number of frames received with 0 octets in the information field. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciErrorLongFrmFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.18
This attribute counts the number of frames received with number of octets in the information field greater than the subscribed maximum. When the maximum count is reached, the count wraps to zero. The hardware ignores frame lengths greater than the hardware receive buffer, and therfore does not includes them in this count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciBecnFrmSetByService 1.3.6.1.4.1.562.2.4.1.72.4.13.1.19
This attribute counts the number of frames with BECN set by the Frame Relay service. It is incremented when the Frame Relay service sets BECN on a frame upon detecting local congestion. This count is incremented regardless of whether the frame already bears a set BECN bit since its use is to determine the place of congestion. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciBytesToIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.20
This attribute counts the number of bytes sent out the interface. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDeBytesToIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.21
This attribute counts the number of bytes sent to the interface with the Discard Eligibility (DE) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscCongestedToIfBytes 1.3.6.1.4.1.562.2.4.1.72.4.13.1.22
This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the link. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscDeCongestedToIfBytes 1.3.6.1.4.1.562.2.4.1.72.4.13.1.23
This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the link. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciBytesFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.24
This attribute counts the number of bytes received from the interface. Bytes that are discarded due to error or excess are not counted. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDeBytesFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.25
This attribute counts the number of bytes received from the interface with the Discard Eligibility (DE) bit set. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciExcessBytesFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.26
This attribute counts the number of bytes received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforcement. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscExcessFromIfBytes 1.3.6.1.4.1.562.2.4.1.72.4.13.1.27
This attribute counts the number of bytes which were discarded due to rate enforcement. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscByteAbit 1.3.6.1.4.1.562.2.4.1.72.4.13.1.28
This attribute counts the bytes number of which were discarded due to the A-bit being turned off. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscCongestedFromIfBytes 1.3.6.1.4.1.562.2.4.1.72.4.13.1.29
This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the interworking function. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciDiscDeCongestedFromIfBytes 1.3.6.1.4.1.562.2.4.1.72.4.13.1.30
This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the interworking function. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciErrorShortBytesFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.31
This attribute counts the number of bytes received with 0 octets in the information field. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciErrorLongBytesFromIf 1.3.6.1.4.1.562.2.4.1.72.4.13.1.32
This attribute counts the number of bytes received when the number of octets in the information field is greater than the subscribed maximum. The hardware ignores bytes lengths greater than the hardware receive buffer and therefore does not include them in this count. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciCalldTable 1.3.6.1.4.1.562.2.4.1.72.4.14
This group contains the operational values for the FrAtm Dlci call data. If the accountingEnabled attribute is no, then this group except for accountingEnabled is not displayed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciCalldEntry

frAtmDlciCalldEntry 1.3.6.1.4.1.562.2.4.1.72.4.14.1
An entry in the frAtmDlciCalldTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciCalldEntry  

frAtmDlciAccountingEnabled 1.3.6.1.4.1.562.2.4.1.72.4.14.1.1
This attribute indicates whether accounting is enabled. To enable accounting, the FrAtm Ca accountCollection attribute must be non- empty and FrAtm Dlci Sp accounting attribute must be on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

frAtmDlciAccountingEnd 1.3.6.1.4.1.562.2.4.1.72.4.14.1.2
This attribute indicates whether this DLCI represents the called or calling end of the connection. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

frAtmDlciCorrelationTag 1.3.6.1.4.1.562.2.4.1.72.4.14.1.3
This attribute indicates the unique string which identifies this connection. The value of this operational attribute can be provisioned in the correlationTag attribute of either the Siwf Npvc, Siwf Spvc, or Niwf Spvc subcomponents. For the Siwf Spvc and Niwf Spvc cases, when the provisionable correlationTag is an empty string, then this attribute receives the value of a system- generated correlationTag. Downstream processing uses this attribute to correlate accounting records issued at different nodes in the network. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..28)  

frAtmDlciIntTable 1.3.6.1.4.1.562.2.4.1.72.4.15
This group contains the operational statistics for the FrAtm Dlci interval data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciIntEntry

frAtmDlciIntEntry 1.3.6.1.4.1.562.2.4.1.72.4.15.1
An entry in the frAtmDlciIntTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciIntEntry  

frAtmDlciStartTime 1.3.6.1.4.1.562.2.4.1.72.4.15.1.1
This attribute indicates the start time of this interval. A new interval is started each time an accounting record is generated and call at a setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnterpriseDateAndTime Size(0|19)  

frAtmDlciTotalIngressBytes 1.3.6.1.4.1.562.2.4.1.72.4.15.1.2
This attribute counts the total payload bytes in received from the link since the start of the interval. To calculate total valid payload bytes received from link, subtract discardedBytes from this attribute. The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated or at call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

frAtmDlciTotalEgressBytes 1.3.6.1.4.1.562.2.4.1.72.4.15.1.3
This attribute counts the total payload bytes sent to the link since the start of the interval. The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated or at call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

frAtmDlciEirIngressBytes 1.3.6.1.4.1.562.2.4.1.72.4.15.1.4
This attribute counts the total valid payload bytes in frames with the Discard Eligibility (DE) bit set to 1 received from the link since the start of the interval. Subtract this attribute and discardedBytes from totalIngressBytes to calculate total valid payload bytes in frames received from the link, with the DE bit set to 0. The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated or at call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

frAtmDlciEirEgressBytes 1.3.6.1.4.1.562.2.4.1.72.4.15.1.5
This attribute counts the total valid payload bytes in frames with the Discard Eligibility (DE) bit set sent to the link since the start of the interval. Subtract the value of this attribute from totalEgressBytes to calculate total valid payload bytes in frames, with DE set to 0, sent to the link. The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated or at call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

frAtmDlciDiscardedBytes 1.3.6.1.4.1.562.2.4.1.72.4.15.1.6
This attribute counts the total payload bytes in invalid frames received from the link and discarded at the DLCI since the start of the interval. This count is a sum of octets in frames discarded due to: frames too long or too short; A-Bit off; or to rate enforcement. The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated or at call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned64 Size(8)  

frAtmDlciTotalIngressFrames 1.3.6.1.4.1.562.2.4.1.72.4.15.1.7
This attribute counts the total number of frames received from the link since the start of the interval. To calculate the total valid number of frames received from the link, subtract discardedFrames from this attribute. The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated or at call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciTotalEgressFrames 1.3.6.1.4.1.562.2.4.1.72.4.15.1.8
This attribute counts the total number of frames sent to the link since the start of the interval. The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated or at call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciEirIngressFrames 1.3.6.1.4.1.562.2.4.1.72.4.15.1.9
This attribute counts the number of valid frames with the Discard Eligibility (DE) bit set to 1 received from the link since the start of the interval. Subtract this attribute and discardedFrames from totalIngressFrames to calculate total valid frames received from the link, with the DE bit set to 0. The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated or at call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciEirEgressFrames 1.3.6.1.4.1.562.2.4.1.72.4.15.1.10
This attribute counts the number of frames with the Discard Eligibility (DE) bit set sent to the link since the start of the interval. Subtract the value of this attribute from totalEgressFrames to calculate total frames, with DE set to 0, sent to the link.The start of the interval is captured in the startTime attribute. The count is reset to zero when an accounting record is generated call setup. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciDiscardedFrames 1.3.6.1.4.1.562.2.4.1.72.4.15.1.11
This attribute counts the number of invalid frames received from the link and discarded at the DLCI. The count is reset to zero when an accounting record is generated or at call setup. The count is a sum of frames discarded due to: frames too long or too short; A-Bit is off; or rate enforcement. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciElapsedDifference 1.3.6.1.4.1.562.2.4.1.72.4.15.1.12
This attribute indicates the elapsed time representing the of this interval data. It is the elapsed time in 0.1 second increments since the start of the interval. If the accountingEnabled attribute is no, then this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciSp 1.3.6.1.4.1.562.2.4.1.72.4.2
OBJECT IDENTIFIER    

frAtmDlciSpRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.2.1
This entry controls the addition and deletion of frAtmDlciSp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSpRowStatusEntry

frAtmDlciSpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.2.1.1
A single entry in the table represents a single frAtmDlciSp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSpRowStatusEntry  

frAtmDlciSpRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.2.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciSp components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

frAtmDlciSpComponentName 1.3.6.1.4.1.562.2.4.1.72.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciSpStorageType 1.3.6.1.4.1.562.2.4.1.72.4.2.1.1.4
This variable represents the storage type value for the frAtmDlciSp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciSpIndex 1.3.6.1.4.1.562.2.4.1.72.4.2.1.1.10
This variable represents the index for the frAtmDlciSp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciSpProvTable 1.3.6.1.4.1.562.2.4.1.72.4.2.10
This group contains the provisionable attributes for the Data Link Connection Identifier. These attributes reflect the service parameters specific to this instance of DLCI. The congestion control attributes in this group are defined in T1.606 Addendum 1.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSpProvEntry

frAtmDlciSpProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1
An entry in the frAtmDlciSpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSpProvEntry  

frAtmDlciSpMaximumFrameSize 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.1
This attribute specifies the maximum number of octets which may be included in the information field. The Frame Relay header and CRC octets are not included in this definition. This attribute corresponds to the dN1 parameter described in the Vendor Forum Specification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8187  

frAtmDlciSpRateEnforcement 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.2
This attribute specifies whether rate enforcement is in effect for this user data link connection. When rateEnforcement is on, the CIR and De=1 traffic will be measured and enforced. When rateEnforcement is off, all frames from the user are accepted and no modifications to the frame with respect to the De bit will be made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

frAtmDlciSpCommittedInformationRate 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.3
This attribute specifies the committed information rate (CIR). It represents the rate at which the network agrees to transfer information under normal conditions when rate enforcement is in effect. When rate enforcement is not in effect, this attribute is ignored. Determination of the actual CIR is based on committedInformationRate, committedBurstSize and a measurement interval. The measurement interval is determined internally when committedInformationRate has a non-zero value. Otherwise, it is based on measurementInterval which must be explicitly provisioned. Note: The committedBurstSize must have a value of 0 when rate enforcement is in effect and committedInformationRate has a value of 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciSpCommittedBurstSize 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.4
This attribute specifies the committed burst size (Bc). It represents the amount of data that a network agrees to transfer under normal conditions over a measurement interval when rate enforcement is in effect. Data marked DE=1 is not accounted for in the committed burst size. When rate enforcement is not in effect, this attribute is ignored. Note: The committedInformationRate must have a value of 0 when rate enforcement is in effect and committedBurstSize has a value of 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciSpExcessBurstSize 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.5
This attribute specifies the excess burst size (Be). It represents the amount of uncommitted data that the network will attempt to deliver over a measurement interval when rate enforcement is in effect. Data marked DE=1 by the user or by the network is accounted for here. committedInformationRate, committedBurstSize, and excessBurstSize cannot all be zero when rate enforcement is in effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciSpMeasurementInterval 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.6
This attribute specifies the time interval over which rates and burst sizes are measured when rate enforcement is in effect. When rate enforcement is in effect and both committedInformationRate and committedBurstSize have values of zero, this attribute must have a non-zero value. When rate enforcement is not in effect or when committedInformationRate and committedBurstSize have non-zero values, this attribute is ignored. When committedInformationRate and committedBurstSize have non-zero values, the time interval is internally calculated. In this situation, measurementInterval is ignored, and it does not represent the time interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..25500  

frAtmDlciSpEmissionPriorityToIf 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.7
This attribute specifies the emission priority of frames sent to the interface. The high priority frames in the high priority frame queue will be served before the low priority frames in the low priority queue. This attribute is obsoleted. During migration, its value will be transferred to emissionPriToIf.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER low(0), high(3)  

frAtmDlciSpEmissionPrioToIf 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.8
This attribute specifies the emission priority of frames sent to the interface. Frames in a higher priority queue will be sent before frames in a lower priority queue. The value of this attribute must be greater than or equal to 0, and less than the value of the provisionable attribute numberOfEmissionQs.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1 | 2 | 3  

frAtmDlciSpAccounting 1.3.6.1.4.1.562.2.4.1.72.4.2.10.1.9
This attribute allows the operator to control accounting for this DLCI. To enable accounting data collection and record generation, the value of this attribute must be on and at least one of the accountCollection reasons in the FrAtm Ca component must be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

frAtmDlciSiwf 1.3.6.1.4.1.562.2.4.1.72.4.3
OBJECT IDENTIFIER    

frAtmDlciSiwfRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.3.1
This entry controls the addition and deletion of frAtmDlciSiwf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfRowStatusEntry

frAtmDlciSiwfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.1.1
A single entry in the table represents a single frAtmDlciSiwf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfRowStatusEntry  

frAtmDlciSiwfRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.3.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciSiwf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciSiwfComponentName 1.3.6.1.4.1.562.2.4.1.72.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciSiwfStorageType 1.3.6.1.4.1.562.2.4.1.72.4.3.1.1.4
This variable represents the storage type value for the frAtmDlciSiwf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciSiwfIndex 1.3.6.1.4.1.562.2.4.1.72.4.3.1.1.10
This variable represents the index for the frAtmDlciSiwf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciSiwfConnOpTable 1.3.6.1.4.1.562.2.4.1.72.4.3.11
This group contains operational attributes for the ATM connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfConnOpEntry

frAtmDlciSiwfConnOpEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.11.1
An entry in the frAtmDlciSiwfConnOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfConnOpEntry  

frAtmDlciSiwfDiscardPriority 1.3.6.1.4.1.562.2.4.1.72.4.3.11.1.2
This attribute indicates the discard priority of frames sent to and received from the ATM connection. When discardPriority is dp3 the frames belonging to this connection will be discarded first when the FrAtm/n Dlci/n Siwf and the ATM End-Point experience congestion. When discardPriority is dp2 the frames belonging to this connection will be discarded after all the dp3 priority frames are discarded when the FrAtm/n Dlci/n Siwf and the ATM End-Point experience congestion. When discardPriority is dp1 the frames belonging to this connection will be discarded after all the dp2 and dp3 priority frames are discarded when the FrAtm/n Dlci/n Siwf and the ATM End-Point experience congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dp1(1), dp2(2), dp3(3)  

frAtmDlciSiwfAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.72.4.3.11.1.4
This attribute indicates the ATM service category that is used for this connection. This attribute is only displayed for SPVCs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ubr(0), cbr(1), rtVbr(2), nrtVbr(3), notApplicable(5)  

frAtmDlciSiwfTrafficParmConvPolicy 1.3.6.1.4.1.562.2.4.1.72.4.3.11.1.5
This attribute indicates the traffic parameter conversion policy that is being used for this connection. For Npvcs, this attribute is not displayed. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected - ATM service category rtVbr and nrtVbr supported only - PCR0+1 is based on AR - SCR0+1 is based on CIR and EIR - MBS0+1 is based on Bc, Be, CIR, EIR and AR - Takes into account that the instantaneous rate of the frame relay stream can be above CIR and up to the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR0+1 is based on AR - SCR0 is based on CIR - MBS0 is based on Bc, CIR, and AR - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer - ATM service category rtVbr and nrtVbr supported only - PCR0+1 is based on CIR and EIR - SCR0 is based on the CIR - MBS0 is based on the CIR - The maximum PCR is no longer based on the AR but rather on the CIR and EIR or CIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected - ATM service category ubr, cbr, rtVbr and nrtVbr supported only - PCR0+1 is based only on CIR. DESCRIPTION
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER n3(3), n4(4), n5(5), n6(6), notApplicable(7)  

frAtmDlciSiwfAvgFrameSize 1.3.6.1.4.1.562.2.4.1.72.4.3.11.1.6
This attribute indicates the average frame size that is used for this connection as part of the traffic parameter conversion policy. Average frame size is not applicable for Npvcs, and therefore it is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..8187  

frAtmDlciSiwfRemoteAddress 1.3.6.1.4.1.562.2.4.1.72.4.3.11.1.8
This attribute indicates the remote address (native E.164, native X.121 or NSAP) for this connection. This attribute is only diplayed for SPVCs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(1..44)  

frAtmDlciSiwfRemoteConnectionIdentifier 1.3.6.1.4.1.562.2.4.1.72.4.3.11.1.9
This attribute indicates the remote connection identifier. This identifier is either a remote Atm Vpi.Vci logical channel number or a remote Frame Relay Dlci logical channel number. The remote Atm Vpi.Vci logical channel number is displayed as 'Vpi.Vci'. and the remote Frame Relay Dlci logical channel number is displayed as '0.remoteDlci'. For NPVCs, this attribute is not diplayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IntegerSequence Size(3..9)  

frAtmDlciSiwfSdOpTable 1.3.6.1.4.1.562.2.4.1.72.4.3.12
This group contains operational information for a Siwf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfSdOpEntry

frAtmDlciSiwfSdOpEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.12.1
An entry in the frAtmDlciSiwfSdOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfSdOpEntry  

frAtmDlciSiwfMode 1.3.6.1.4.1.562.2.4.1.72.4.3.12.1.1
This attribute indicates the mode of interoperability between the Frame Relay and ATM connections regarding upper layer protocol encapsulations. A value of translationMode indicates that the interworking function performs translation between RFC 1490 and RFC 1483 encapsulated headers, including routed protocol translation, bridged protocol translation, and connection oriented protocol translation (except for RFC 1490 connection oriented protocol without RFC 1490 header, which is done in speTranslationMode). A value of transparentMode indicates that the interworking function forwards data without altering the upper layer user protocol encapsulation. Transparent mode is selected when the upper layer user protocol encapsulation methods are compatible between terminal equipments. A value of speTranslationMode indicates that the interworking function performs single protocol translation between RFC 1490 with no header and RFC 1483 encapsulated packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER translationMode(0), transparentMode(1), speTranslationMode(2)  

frAtmDlciSiwfDeToClpMapping 1.3.6.1.4.1.562.2.4.1.72.4.3.12.1.2
This attribute indicates the type of DE to CLP mapping that is performed in the Frame Relay to ATM direction. A value of preserve indicates that the DE field in a Q.922 core frame is copied to the ATM CLP field of every cell containing the information of that frame. A value of always0 indicates that the CLP field of every generated ATM cell is always 0. A value of always1 indicates that the CLP field of every generated ATM cell is always1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2)  

frAtmDlciSiwfClpToDeMapping 1.3.6.1.4.1.562.2.4.1.72.4.3.12.1.3
This attribute indicates the type of CLP to DE mapping that is performed in the ATM to Frame Relay direction. A value of preserve indicates that the DE field of the Q.922 Core frame is set when one or more ATM cells belonging to an AAL5 frame have their CLP field set. A value of always0 indicates that the DE field of the Q.922 Core frame is always set to 0. A value of always1 indicates that the DE field of the Q.922 Core frame is always set to 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2)  

frAtmDlciSiwfFecnToEfciMapping 1.3.6.1.4.1.562.2.4.1.72.4.3.12.1.4
This attribute indicates the type of FECN to EFCI mapping that is performed in the Frame Relay to ATM direction. A value of preserve indicates that the FECN field in a Q.922 Core frame is copied directly to the ATM EFCI field of every cell. A value of always0 indicates that the EFCI field in every ATM cell generated is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER always0(0), preserve(2)  

frAtmDlciSiwfCrToUuMapping 1.3.6.1.4.1.562.2.4.1.72.4.3.12.1.5
This attribute indicates the type of CR to UU mapping that is performed in the Frame Relay to ATM direction. A value of preserve indicates that the CR field in the Q.922 Core frame is mapped directly to the ATM UU field of every cell generated by the AAL5 segmentation process. A value of always0 indicates that the UU field in every ATM cell generated is set to 0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER always0(0), preserve(2)  

frAtmDlciSiwfTransferPriority 1.3.6.1.4.1.562.2.4.1.72.4.3.12.1.6
This attribute indicates the transfer priority used to establish the connection. For Npvcs, the value will be notApplicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), notApplicable(253)  

frAtmDlciSiwfAssignedBandwidthPool 1.3.6.1.4.1.562.2.4.1.72.4.3.12.1.7
This attribute specifies the bandwidth pool which is used by this Dlci.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15)  

frAtmDlciSiwfSiwfSpvcOpTable 1.3.6.1.4.1.562.2.4.1.72.4.3.13
This group contains operational attributes for the FrAtm Dlci Siwf Spvc connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfSiwfSpvcOpEntry

frAtmDlciSiwfSiwfSpvcOpEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1
An entry in the frAtmDlciSiwfSiwfSpvcOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfSiwfSpvcOpEntry  

frAtmDlciSiwfPeakCellRate0 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.1
This attribute indicates the Peak Cell Rate (PCR) of the ATM VCC to which this interworking function is linked for all cells (with CLP=0 and CLP=1). The pcr0 is derived from the remote end traffic parameters using the conversion policy of the transferPriorityMapping. For NPVCs, this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciSiwfPeakCellRate01 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.2
This attribute indicates the Peak Cell Rate (PCR) of the ATM VCC to which this interworking function is linked for all cells (with CLP=0 and CLP=1). The pcr01 is derived from the remote end traffic parameters using the conversion policy of the transferPriorityMapping. For NPVCs, this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciSiwfSustainedCellRate0 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.3
This attribute indicates the Sustained Cell Rate (SCR) of the ATM VCC to which this interworking function is linked for high priority cells (with CLP=0). The scr0 is derived from the remote end traffic parameters using the conversion policy of the transferPriorityMapping. For NPVCs, this attribute is not dispalyed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciSiwfSustainedCellRate01 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.4
This attribute indicates the Sustained Cell Rate (SCR) of the ATM VCC that to which this interworking function is linked for all cells (with CLP=0 and CLP=1). The scr01 is derived from the remote end traffic parameters using the conversion policy of the transferPriorityMapping. For NPVCs, this attribute is not dispalyed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciSiwfMaximumBurstSize0 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.5
This attribute indicates the Maximum Burst Size (MBS) of the ATM VCC to which this interworking function is linked for high priority cells (with CLP=0). The mbs0 is derived from the remote end traffic parameters using the conversion policy of the transferPriorityMapping. For NPVCs, this attribute is not dispalyed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciSiwfMaximumBurstSize01 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.6
This attribute indicates the Maximum Burst Size (MBS) of the ATM VCC to which this interworking function is linked for all cells (with CLP=0 and CLP=1). The mbs01 is derived from the remote end traffic parameters using the conversion policy of the transferPriorityMapping. For NPVCs, this attribute is not displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciSiwfEquivalentBitRate 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.7
This attribute indicates the access reserved bandwidth for this FR- ATM connection when CAC is on. If a connection is subcribed to CIR only or CIR plus EIR service, the EBR reserved is CIR. If a connection is subcribed to EIR only service, the EBR reserved is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciSiwfType 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.9
This attribute indicates if the component provisioned is a calling or called end. If the value is master, the Dlci Siwf Spvc component is provisioned as a calling end and is responsible for originating the call to set up the ATM VCC. If the value is slave, this Dlci Siwf component is provisioned as a called end and is responsible for terminating call setup requests from the remote end. This attribute is not displayed for NPVCs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(0), slave(1), notApplicable(2)  

frAtmDlciSiwfVccClearCause 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.10
This attribute indicates the cause value of the last release message received from the network. This attribute is not displayed for NPVCs. Please refer to ATM User-Network Interface Specification for possible clear causes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

frAtmDlciSiwfVccCauseDiag 1.3.6.1.4.1.562.2.4.1.72.4.3.13.1.15
This attribute indicates the diagnostic value of the last release message received from the network. This attribute is not displayed for NPVCs. Please refer to ATM User-Network Interface Specification for possible diagnostic values.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(1..8)  

frAtmDlciSiwfStatsTable 1.3.6.1.4.1.562.2.4.1.72.4.3.14
This group contains statistics for the Siwf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfStatsEntry

frAtmDlciSiwfStatsEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.14.1
An entry in the frAtmDlciSiwfStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfStatsEntry  

frAtmDlciSiwfUnknown1490Frames 1.3.6.1.4.1.562.2.4.1.72.4.3.14.1.1
This attribute counts the number of frames received from the interface that have a frame header that is not recognized by the RFC 1490. When the maximum count is reached, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciSiwfInvalid1490Frames 1.3.6.1.4.1.562.2.4.1.72.4.3.14.1.2
This attribute counts the number of frames received from the interface that have an invalid frame header. An invalid frame header occurs when the frame has less than the expected number of bytes. When the maximum count is reached, the count wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciSiwfLastUnknown1490ProtocolHeader 1.3.6.1.4.1.562.2.4.1.72.4.3.14.1.3
This attribute contains the most recent unrecognized protocol header that was received from the interface. All the RFC 1490 protocols described in sections 5.3.1.1 through 5.3.1.3 of FRF.8 are supported, except ARP is not supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(1..8)  

frAtmDlciSiwfUnknown1483Frames 1.3.6.1.4.1.562.2.4.1.72.4.3.14.1.4
This attribute counts the number of frames received from the ATM connection that have a frame header that is not recognized by the RFC 1483. When the maximum count is reached, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciSiwfInvalid1483Frames 1.3.6.1.4.1.562.2.4.1.72.4.3.14.1.5
This attribute counts the number of frames received from the ATM connection that have an invalid frame header. An invalid frame header occurs when the frame has less than the expected number of bytes. When the maximum count is reached, it wraps to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

frAtmDlciSiwfLastUnknown1483ProtocolHeader 1.3.6.1.4.1.562.2.4.1.72.4.3.14.1.6
This attribute identifies the most recent unrecognized protocol header that was received from the ATM connection. All the RFC 1483 protocols described in sections 5.3.1.1 through 5.3.1.3 of FRF.8 are supported except ARP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(1..8)  

frAtmDlciSiwfSd 1.3.6.1.4.1.562.2.4.1.72.4.3.2
OBJECT IDENTIFIER    

frAtmDlciSiwfSdRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.3.2.1
This entry controls the addition and deletion of frAtmDlciSiwfSd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfSdRowStatusEntry

frAtmDlciSiwfSdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.2.1.1
A single entry in the table represents a single frAtmDlciSiwfSd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfSdRowStatusEntry  

frAtmDlciSiwfSdRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.3.2.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciSiwfSd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciSiwfSdComponentName 1.3.6.1.4.1.562.2.4.1.72.4.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciSiwfSdStorageType 1.3.6.1.4.1.562.2.4.1.72.4.3.2.1.1.4
This variable represents the storage type value for the frAtmDlciSiwfSd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciSiwfSdIndex 1.3.6.1.4.1.562.2.4.1.72.4.3.2.1.1.10
This variable represents the index for the frAtmDlciSiwfSd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciSiwfSdProvTable 1.3.6.1.4.1.562.2.4.1.72.4.3.2.10
This group contains provisionable attributes for the parent Siwf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfSdProvEntry

frAtmDlciSiwfSdProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.2.10.1
An entry in the frAtmDlciSiwfSdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfSdProvEntry  

frAtmDlciSiwfSdMode 1.3.6.1.4.1.562.2.4.1.72.4.3.2.10.1.1
This attribute specifies the mode of interoperability between the Frame Relay and ATM connections regarding upper layer protocol encapsulations. When translationMode is selected, the interworking function performs translations between RFC 1490 and RFC 1483 encapsulated headers, including routed protocol translation, bridged protocol translation, and connection oriented protocol translation (except for RFC 1490 connection oriented protocol without RFC 1490 header, which is done in speTranslationMode). A value of transparentMode indicates that the interworking function forwards data without altering the upper layer user protocol encapsulation. Transparent mode is selected when the upper layer user protocol encapsulation methods are compatible between terminal equipments. A value of speTranslationMode indicates that the interworking function performs single protocol translation between RFC 1490 with no header and RFC 1483 encapsulated packets. The default value is sameAsInterface, which means as defined in FrAtm/n Ca sdMode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER translationMode(0), transparentMode(1), speTranslationMode(2), sameAsInterface(255)  

frAtmDlciSiwfSdDeToClpMapping 1.3.6.1.4.1.562.2.4.1.72.4.3.2.10.1.2
This attribute specifies the DE to CLP mapping that is performed in the Frame Relay to ATM direction. When preserve is selected, the DE field in the Q.922 core frame is mapped to the ATM CLP field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame. When always0 is selected, the CLP field of every ATM cell generated by the segmentation process of the AAL5 PDU containing the information of that frame is always set to 0. When always1 is selected, the CLP field of every ATM cell generated by the segmentation process of the AAL5 PDU containing the information of that frame is always set to 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2), sameAsInterface(255)  

frAtmDlciSiwfSdClpToDeMapping 1.3.6.1.4.1.562.2.4.1.72.4.3.2.10.1.3
This attribute specifies the type of CLP to DE mapping that is performed in the ATM to Frame Relay to direction. When preserve is selected, the DE field of the Q.922 Core frame is set when one or more ATM cells belonging to an AAL5 frame have their CLP field set. When always0 is selected, the DE field of the Q.922 Core frame is always set to 0. When always1 is selected, the DE field of the Q.922 Core frame is always set to 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2), sameAsInterface(255)  

frAtmDlciSiwfSdFecnToEfciMapping 1.3.6.1.4.1.562.2.4.1.72.4.3.2.10.1.4
This attribute specifies the type of FECN to EFCI mapping that is performed in the Frame Relay to ATM direction. When preserve is selected, the FECN field in the Q.922 Core frame is mapped directly to the ATM EFCI field of every cell generated by the AAL5 segmentation process. When always0 is selected, the EFCI field in every ATM cell generated is set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), preserve(2), sameAsInterface(255)  

frAtmDlciSiwfSdCrToUuMapping 1.3.6.1.4.1.562.2.4.1.72.4.3.2.10.1.5
This attribute indicates the type of CR to UU mapping that is performed in the Frame Relay to ATM direction. A value of preserve indicates that the CR field in the Q.922 Core frame is mapped directly to the ATM UU field of every cell generated by the AAL5 segmentation process. A value of always0 indicates that the UU field in every ATM cell generated is set to 0.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), preserve(2), sameAsInterface(255)  

frAtmDlciSiwfNPvc 1.3.6.1.4.1.562.2.4.1.72.4.3.3
OBJECT IDENTIFIER    

frAtmDlciSiwfNPvcRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.3.3.1
This entry controls the addition and deletion of frAtmDlciSiwfNPvc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfNPvcRowStatusEntry

frAtmDlciSiwfNPvcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.3.1.1
A single entry in the table represents a single frAtmDlciSiwfNPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfNPvcRowStatusEntry  

frAtmDlciSiwfNPvcRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.3.3.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciSiwfNPvc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciSiwfNPvcComponentName 1.3.6.1.4.1.562.2.4.1.72.4.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciSiwfNPvcStorageType 1.3.6.1.4.1.562.2.4.1.72.4.3.3.1.1.4
This variable represents the storage type value for the frAtmDlciSiwfNPvc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciSiwfNPvcIndex 1.3.6.1.4.1.562.2.4.1.72.4.3.3.1.1.10
This variable represents the index for the frAtmDlciSiwfNPvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciSiwfNPvcProvTable 1.3.6.1.4.1.562.2.4.1.72.4.3.3.10
This group contains provisionable attributes for the NPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfNPvcProvEntry

frAtmDlciSiwfNPvcProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.3.10.1
An entry in the frAtmDlciSiwfNPvcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfNPvcProvEntry  

frAtmDlciSiwfNPvcAtmConnection 1.3.6.1.4.1.562.2.4.1.72.4.3.3.10.1.1
This attribute specifies the ATM connection to which the interworking function is linked. The ATM connection must be linked to an ATM end-point. For example AtmIf/m Vcc/m Nep.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

frAtmDlciSiwfNPvcCorrelationTag 1.3.6.1.4.1.562.2.4.1.72.4.3.3.10.1.3
This attribute specifies a unique string, set by the operator, which identifies the call for accounting purposes. Downstream processing uses this attribute to correlate accounting records issued at different nodes in the network. Normally, this value is provisioned with the same value at each end of the connection. If the value of accountingEnabled is no, this attribute has no effect. This attribute is also visible in the FrAtm Dlci component when accounting is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..28)  

frAtmDlciSiwfNPvcSiwfNpvcOpTable 1.3.6.1.4.1.562.2.4.1.72.4.3.3.11
This group contains the operational attributes for the FrAtm Dlci Siwf Npvc connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfNPvcSiwfNpvcOpEntry

frAtmDlciSiwfNPvcSiwfNpvcOpEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.3.11.1
An entry in the frAtmDlciSiwfNPvcSiwfNpvcOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfNPvcSiwfNpvcOpEntry  

frAtmDlciSiwfNPvcConnectionToAtm 1.3.6.1.4.1.562.2.4.1.72.4.3.3.11.1.1
This attribute indicates the ATM connection to which the interworking function is linked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

frAtmDlciSiwfSPvc 1.3.6.1.4.1.562.2.4.1.72.4.3.4
OBJECT IDENTIFIER    

frAtmDlciSiwfSPvcRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.3.4.1
This entry controls the addition and deletion of frAtmDlciSiwfSPvc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfSPvcRowStatusEntry

frAtmDlciSiwfSPvcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.4.1.1
A single entry in the table represents a single frAtmDlciSiwfSPvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfSPvcRowStatusEntry  

frAtmDlciSiwfSPvcRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.3.4.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciSiwfSPvc components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciSiwfSPvcComponentName 1.3.6.1.4.1.562.2.4.1.72.4.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciSiwfSPvcStorageType 1.3.6.1.4.1.562.2.4.1.72.4.3.4.1.1.4
This variable represents the storage type value for the frAtmDlciSiwfSPvc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciSiwfSPvcIndex 1.3.6.1.4.1.562.2.4.1.72.4.3.4.1.1.10
This variable represents the index for the frAtmDlciSiwfSPvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciSiwfSPvcProvTable 1.3.6.1.4.1.562.2.4.1.72.4.3.4.10
This group contains provisionable attributes for the soft PVC component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfSPvcProvEntry

frAtmDlciSiwfSPvcProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.4.10.1
An entry in the frAtmDlciSiwfSPvcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfSPvcProvEntry  

frAtmDlciSiwfSPvcRemoteAddress 1.3.6.1.4.1.562.2.4.1.72.4.3.4.10.1.2
This attribute specifies the remote address of the SPVC. It is represented as a prefix NPI string and a sequence of up to 15 digits to specify either a native (E.164 or X.121) address format or Atm End System Address(AESA) in ISO NSAP format. For example: native E.164 = 'e.upto15digits' native X.121 = 'x.upto14digits' NSAP E.164 ATM address = 'n.upto15digits.ESI.SEL' NSAP address = '40 hexadecimal digits'
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(3..44)  

frAtmDlciSiwfSPvcRemoteConnectionIdentifier 1.3.6.1.4.1.562.2.4.1.72.4.3.4.10.1.3
This attribute specifies the remote connection identifier. The identifier is either a remote Atm Vpi.Vci logical channel number assignment or a remote Frame Relay Dlci logical channel number assignment. The remote Atm Vpi.Vci logical channel number is input as 'Vpi.Vci'. and the remote Frame Relay Dlci logical channel number is input as '0.remoteDlci'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IntegerSequence Size(3..9)  

frAtmDlciSiwfSPvcCorrelationTag 1.3.6.1.4.1.562.2.4.1.72.4.3.4.10.1.4
This attribute specifies the unique string, set by the operator, which identifies the call for accounting purposes. Downstream processing uses this attribute to correlate accounting records issued at different nodes in the network. If the value of accountingEnabled is no, this attribute has no effect. This attribute is also visible in the FrAtm Dlci component when accounting is enabled. When this attribute is an empty string, the operational correlationTag attribute in the FrAtm Dlci component receives the value of a system-generated correlationTag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..28)  

frAtmDlciSiwfQoS 1.3.6.1.4.1.562.2.4.1.72.4.3.5
OBJECT IDENTIFIER    

frAtmDlciSiwfQoSRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.3.5.1
This entry controls the addition and deletion of frAtmDlciSiwfQoS components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfQoSRowStatusEntry

frAtmDlciSiwfQoSRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.5.1.1
A single entry in the table represents a single frAtmDlciSiwfQoS component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfQoSRowStatusEntry  

frAtmDlciSiwfQoSRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.3.5.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciSiwfQoS components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciSiwfQoSComponentName 1.3.6.1.4.1.562.2.4.1.72.4.3.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciSiwfQoSStorageType 1.3.6.1.4.1.562.2.4.1.72.4.3.5.1.1.4
This variable represents the storage type value for the frAtmDlciSiwfQoS tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciSiwfQoSIndex 1.3.6.1.4.1.562.2.4.1.72.4.3.5.1.1.10
This variable represents the index for the frAtmDlciSiwfQoS tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciSiwfQoSProvTable 1.3.6.1.4.1.562.2.4.1.72.4.3.5.10
This group contains the provisionable quality of service attributes for the Qos component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfQoSProvEntry

frAtmDlciSiwfQoSProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.5.10.1
An entry in the frAtmDlciSiwfQoSProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfQoSProvEntry  

frAtmDlciSiwfQoSEmissionPriorityToIf 1.3.6.1.4.1.562.2.4.1.72.4.3.5.10.1.1
This attribute specifies the emission priority of frames sent to the FrAtm interface. Frames in a higher priority queue, represented by a numerically higher number, will be sent before frames in a lower priority queue. The value of this attribute is interpreted according to the value of the provisionable attribute numberOfEmissionQs under the parent FrAtm component. If the numberOfEmissionQs attribute is set to 2, emissionPriorityToIf value of 0 is mapped to emission priority queue 0 representing a lower priority queue, and emissionPriorityToIf values of 1, 2, and 3 are mapped to emission priority queue 1 representing the highest priority queue. If the numberOfEmissionQs is set to 4, the emissionPriorityToIf values are directly assigned to the emission priority queues. A value of deriveFromTp specifies that the emission priority is to be extracted from the Mod Frs AtmNet Tpm/n component using the transferPriority attribute. A value of sameAsInterface specifies that the emission priority is to be extracted from the FrAtm Ca component using the niwfEmissionPriorityToIf attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), deriveFromTp(254), sameAsInterface(255)  

frAtmDlciSiwfQoSTransferPriority 1.3.6.1.4.1.562.2.4.1.72.4.3.5.10.1.2
This attribute specifies the transfer priority of frames sent to the ATM connection using this particular Dlci. In the Frame Relay to ATM direction, the tp is used to select the ATM service category of the connection. In the ATM to Frame Relay direction, the tp is used to select the FrAtm emission priority queue. A value of sameAsInterface specifies that the emission priority is to be extracted from the FrAtm Ca component using the siwfTransferPriority attribute. DESCRIPTION
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), sameAsInterface(255)  

frAtmDlciSiwfAtmCon 1.3.6.1.4.1.562.2.4.1.72.4.3.6
OBJECT IDENTIFIER    

frAtmDlciSiwfAtmConRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.3.6.1
This entry controls the addition and deletion of frAtmDlciSiwfAtmCon components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfAtmConRowStatusEntry

frAtmDlciSiwfAtmConRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.6.1.1
A single entry in the table represents a single frAtmDlciSiwfAtmCon component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfAtmConRowStatusEntry  

frAtmDlciSiwfAtmConRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.3.6.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciSiwfAtmCon components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

frAtmDlciSiwfAtmConComponentName 1.3.6.1.4.1.562.2.4.1.72.4.3.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciSiwfAtmConStorageType 1.3.6.1.4.1.562.2.4.1.72.4.3.6.1.1.4
This variable represents the storage type value for the frAtmDlciSiwfAtmCon tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciSiwfAtmConIndex 1.3.6.1.4.1.562.2.4.1.72.4.3.6.1.1.10
This variable represents the index for the frAtmDlciSiwfAtmCon tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciSiwfAtmConOperTable 1.3.6.1.4.1.562.2.4.1.72.4.3.6.10
This attribute group contains the operational attributes for the NapAtmConnection component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciSiwfAtmConOperEntry

frAtmDlciSiwfAtmConOperEntry 1.3.6.1.4.1.562.2.4.1.72.4.3.6.10.1
An entry in the frAtmDlciSiwfAtmConOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciSiwfAtmConOperEntry  

frAtmDlciSiwfAtmConNextHop 1.3.6.1.4.1.562.2.4.1.72.4.3.6.10.1.1
This attribute shows the component name of the AtmIf Vcc Ep or AtmCon component to which this switched connection is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

frAtmDlciNiwf 1.3.6.1.4.1.562.2.4.1.72.4.4
OBJECT IDENTIFIER    

frAtmDlciNiwfRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.4.1
This entry controls the addition and deletion of frAtmDlciNiwf components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciNiwfRowStatusEntry

frAtmDlciNiwfRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.4.1.1
A single entry in the table represents a single frAtmDlciNiwf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciNiwfRowStatusEntry  

frAtmDlciNiwfRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.4.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciNiwf components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciNiwfComponentName 1.3.6.1.4.1.562.2.4.1.72.4.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciNiwfStorageType 1.3.6.1.4.1.562.2.4.1.72.4.4.1.1.4
This variable represents the storage type value for the frAtmDlciNiwf tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciNiwfIndex 1.3.6.1.4.1.562.2.4.1.72.4.4.1.1.10
This variable represents the index for the frAtmDlciNiwf tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciNiwfOperTable 1.3.6.1.4.1.562.2.4.1.72.4.4.10
This group contains operational networking description information for a Niwf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciNiwfOperEntry

frAtmDlciNiwfOperEntry 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1
An entry in the frAtmDlciNiwfOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciNiwfOperEntry  

frAtmDlciNiwfDeToClpMapping 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.1
This attribute indicates the type of DE to CLP mapping that is performed in the Frame Relay to ATM direction. A value of preserve indicates that the DE field in the Q.922 core frame copies to the CLP field of every ATM cell containing the frame. A value of always0 indicates that the CLP field of every ATM cell is always set to 0. A value of always1 indicates that the CLP field of every ATM cell is always set to 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2)  

frAtmDlciNiwfClpToDeMapping 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.2
This attribute indicates the type of CLP to DE mapping that is performed in the ATM to Frame Relay direction. A value of preserve indicates that the DE field of the Q.922 core frame is set when one or more ATM cells belonging to the frame has its CLP field set, or when the DE field of the FR-SSCS PDU is set. A value of transparent indicates that the DE field of the Q.922 core frame copies directly from the DE field of the FR-SSCS PDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER preserve(2), transparent(3)  

frAtmDlciNiwfTransferPriority 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.3
This attribute indicates the transfer priority in use for a specific connection. This is the transfer priority that the local Frame Relay network uses for this connection to an ATM network. In the Frame Relay to ATM direction, the tp selects the FRF.5 End Point which multiplexes the frames. In the ATM to Frame Relay direction, the tp selects the default FrAtm emission priority queue to be used by this Dlci.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..15  

frAtmDlciNiwfAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.4
This attribute indicates the ATM service category that was mapped for this connection. A value of scNotAvailable indicates that atmServiceCategory is not yet available for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ubr(0), cbr(1), rtVbr(2), nrtVbr(3), scNotAvailable(255)  

frAtmDlciNiwfTrafficParmConvPolicy 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.5
This attribute indicates the traffic parameter conversion policy that is used for this connection. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected. - PCR(0+1) is based on the ATM link rate. - SCR(0+1) is based on the CIR and EIR. - MB(0+1) is based on Bc, Be, CIR, EIR and AR. - Takes into account that the instantaneous rate of the frame relay stream can be above CIR and up to the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR(0+1) is based on AR. - SCR(0) is based on the CIR. - MBS(0) is based on Bc, CIR, and AR. - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR(0+1) is based on the CIR and EIR. - SCR(0) is based on the CIR. - MBS(0) is based on the CIR. - The maximum PCR is no longer based on the AR but rather on the CIR and EIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected. - PCR(0+1) is based only on the CIR policyNotAvailable indicates that the trafficParmConvPolicy is not yet available for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER policyNotAvailable(0), n3(3), n4(4), n5(5), n6(6)  

frAtmDlciNiwfAvgFrameSize 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.6
This attribute indicates the average frame size that was used for this connection as part of the traffic parameter conversion policy. A value of zero indicates that the avgFrameSize is not yet available for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..8187  

frAtmDlciNiwfEquivalentBitRate 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.7
This attribute indicates the access reserved bandwidth for this FR- ATM connection when CAC is on. If a connection is subcribed to CIR only or CIR plus EIR service, the EBR reserved is CIR. If a connection is subcribed to EIR only service, the EBR reserved is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frAtmDlciNiwfAtmDlci 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.8
This attribute displays the DLCI logical channel used inside the ATM VCC. A null value indicates that the atmDlci is not yet available for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..40)  

frAtmDlciNiwfAssignedBandwidthPool 1.3.6.1.4.1.562.2.4.1.72.4.4.10.1.9
This attribute specifies the bandwidth pool which is used by this Dlci.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15)  

frAtmDlciNiwfSpvc 1.3.6.1.4.1.562.2.4.1.72.4.4.2
OBJECT IDENTIFIER    

frAtmDlciNiwfSpvcRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.4.2.1
This entry controls the addition and deletion of frAtmDlciNiwfSpvc components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciNiwfSpvcRowStatusEntry

frAtmDlciNiwfSpvcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.4.2.1.1
A single entry in the table represents a single frAtmDlciNiwfSpvc component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciNiwfSpvcRowStatusEntry  

frAtmDlciNiwfSpvcRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.4.2.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciNiwfSpvc components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

frAtmDlciNiwfSpvcComponentName 1.3.6.1.4.1.562.2.4.1.72.4.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciNiwfSpvcStorageType 1.3.6.1.4.1.562.2.4.1.72.4.4.2.1.1.4
This variable represents the storage type value for the frAtmDlciNiwfSpvc tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciNiwfSpvcIndex 1.3.6.1.4.1.562.2.4.1.72.4.4.2.1.1.10
This variable represents the index for the frAtmDlciNiwfSpvc tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciNiwfSpvcProvTable 1.3.6.1.4.1.562.2.4.1.72.4.4.2.10
This group contains the provisionable attributes for the soft PVC component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciNiwfSpvcProvEntry

frAtmDlciNiwfSpvcProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.4.2.10.1
An entry in the frAtmDlciNiwfSpvcProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciNiwfSpvcProvEntry  

frAtmDlciNiwfSpvcRemoteAddress 1.3.6.1.4.1.562.2.4.1.72.4.4.2.10.1.1
This attribute specifies the remote address of the SPVC. It is represented as a prefix NPI string and a sequence of up to 15 digits to specify either a native E.164 or native X.121 address format. For example, native E.164 = 'e.upto15digits'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(3..17)  

frAtmDlciNiwfSpvcRemoteDlci 1.3.6.1.4.1.562.2.4.1.72.4.4.2.10.1.2
This attribute specifies the remote connection identifier. This identifier is the DLCI logical channel number assignment used inside the ATM pipe.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1007 | 1022  

frAtmDlciNiwfSpvcCorrelationTag 1.3.6.1.4.1.562.2.4.1.72.4.4.2.10.1.3
This attribute specifies aunique string, set by the operator, which identifies the call for accounting purposes. Downstream processing uses this attribute to correlate accounting records issued at different nodes in the network. Normally, the attribute is provisioned with the same value at both ends of the connection. If the value of accountingEnabled is no, this attribute has no effect. This attribute is also visible in the FrAtm Dlci component when accounting is enabled. When this attribute is an empty string, the operational correlationTag attribute in the FrAtm Dlci component receives the value of a system-generated correlationTag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HexString Size(0..28)  

frAtmDlciNiwfNd 1.3.6.1.4.1.562.2.4.1.72.4.4.3
OBJECT IDENTIFIER    

frAtmDlciNiwfNdRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.4.3.1
This entry controls the addition and deletion of frAtmDlciNiwfNd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciNiwfNdRowStatusEntry

frAtmDlciNiwfNdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.4.3.1.1
A single entry in the table represents a single frAtmDlciNiwfNd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciNiwfNdRowStatusEntry  

frAtmDlciNiwfNdRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.4.3.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciNiwfNd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciNiwfNdComponentName 1.3.6.1.4.1.562.2.4.1.72.4.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciNiwfNdStorageType 1.3.6.1.4.1.562.2.4.1.72.4.4.3.1.1.4
This variable represents the storage type value for the frAtmDlciNiwfNd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciNiwfNdIndex 1.3.6.1.4.1.562.2.4.1.72.4.4.3.1.1.10
This variable represents the index for the frAtmDlciNiwfNd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciNiwfNdProvTable 1.3.6.1.4.1.562.2.4.1.72.4.4.3.10
This group contains provisionable attributes for the parent Niwf component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciNiwfNdProvEntry

frAtmDlciNiwfNdProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.4.3.10.1
An entry in the frAtmDlciNiwfNdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciNiwfNdProvEntry  

frAtmDlciNiwfNdDeToClpMapping 1.3.6.1.4.1.562.2.4.1.72.4.4.3.10.1.1
This attribute specifies the type of DE to CLP mapping performs in the Frame Relay to ATM direction. When preserve is selected, the DE field in the Q.922 core frame copies to the CLP field of every ATM cell containing the frame. When always0 is selected, the CLP field of every ATM cell is always set to 0. When always1 is selected, the CLP field of every ATM cell is always set to 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2), sameAsInterface(255)  

frAtmDlciNiwfNdClpToDeMapping 1.3.6.1.4.1.562.2.4.1.72.4.4.3.10.1.2
This attribute specifies the type of CLP to DE mapping performs in the ATM to Frame Relay direction. When preserve is selected, the DE field of the Q.922 core frame is set when one or more ATM cells belonging the frame has its CLP field set, or when the DE field of the FR-SSCS PDU is set. When transparent is selected, the DE field of the Q.922 core frame copies directly from the DE field of the FR-SSCS PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER preserve(2), transparent(3), sameAsInterface(255)  

frAtmDlciNiwfNdTransferPriority 1.3.6.1.4.1.562.2.4.1.72.4.4.3.10.1.3
This attribute specifies the transfer priority of frames sent to and received from the ATM connection. In the Frame Relay to ATM direction, the tp selects the FRF.5 End Point which multiplexes the frames. In the ATM to Frame Relay direction, the tp is applied to frames on a per-DLCI basis. This attribute is obsoleted. During migration, its value will be transfered to the QualityOfService transferPriority.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), sameAsInterface(255)  

frAtmDlciNiwfQoS 1.3.6.1.4.1.562.2.4.1.72.4.4.4
OBJECT IDENTIFIER    

frAtmDlciNiwfQoSRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.4.4.1
This entry controls the addition and deletion of frAtmDlciNiwfQoS components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciNiwfQoSRowStatusEntry

frAtmDlciNiwfQoSRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.4.4.1.1
A single entry in the table represents a single frAtmDlciNiwfQoS component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciNiwfQoSRowStatusEntry  

frAtmDlciNiwfQoSRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.4.4.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciNiwfQoS components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciNiwfQoSComponentName 1.3.6.1.4.1.562.2.4.1.72.4.4.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciNiwfQoSStorageType 1.3.6.1.4.1.562.2.4.1.72.4.4.4.1.1.4
This variable represents the storage type value for the frAtmDlciNiwfQoS tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciNiwfQoSIndex 1.3.6.1.4.1.562.2.4.1.72.4.4.4.1.1.10
This variable represents the index for the frAtmDlciNiwfQoS tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciNiwfQoSProvTable 1.3.6.1.4.1.562.2.4.1.72.4.4.4.10
This group contains the provisionable quality of service attributes for the Qos component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciNiwfQoSProvEntry

frAtmDlciNiwfQoSProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.4.4.10.1
An entry in the frAtmDlciNiwfQoSProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciNiwfQoSProvEntry  

frAtmDlciNiwfQoSEmissionPriorityToIf 1.3.6.1.4.1.562.2.4.1.72.4.4.4.10.1.1
This attribute specifies the emission priority of frames sent to the FrAtm interface. Frames in a higher priority queue, depicted by a numerically higher number, are sent before frames in a lower priority queue. The value of this attribute is interpreted according to the value of the provisionable attribute numberOfEmissionQs under the parent FrAtm component. If the numberOfEmissionQs attribute is set to 2, emissionPriorityToIf value of 0 maps to emission priority queue 0 representing a lower priority queue, and emissionPriorityToIf values of 1, 2, and 3 map to emission priority queue 1 representing the highest priority queue. If the numberOfEmissionQs is set to 4, the emissionPriorityToIf values are directly assigned to the emission priority queues. A value of deriveFromTp specifies that the emission priority is to be extracted from the Mod Frs AtmNet Tpm/n component using the transferPriority attribute. A value of sameAsInterface specifies that the emission priority is extracts from the FrAtm Ca component using the niwfEmissionPriorityToIf attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), deriveFromTp(254), sameAsInterface(255)  

frAtmDlciNiwfQoSTransferPriority 1.3.6.1.4.1.562.2.4.1.72.4.4.4.10.1.2
This attribute specifies the transfer priority of frames sent to the ATM connection. In the Frame Relay to ATM direction, the tp selects the FRF.5 End Point which multiplexes the frames. In the ATM to Frame Relay direction, the tp selects the default FrAtm emission priority queue to be used by this DLCI. A value of sameAsInterface specifies that the emission priority is to be extracted from the FrAtm Ca component using the niwfTransferPriority attribute. DESCRIPTION
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), sameAsInterface(255)  

frAtmDlciEgSp 1.3.6.1.4.1.562.2.4.1.72.4.5
OBJECT IDENTIFIER    

frAtmDlciEgSpRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.4.5.1
This entry controls the addition and deletion of frAtmDlciEgSp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciEgSpRowStatusEntry

frAtmDlciEgSpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.4.5.1.1
A single entry in the table represents a single frAtmDlciEgSp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciEgSpRowStatusEntry  

frAtmDlciEgSpRowStatus 1.3.6.1.4.1.562.2.4.1.72.4.5.1.1.1
This variable is used as the basis for SNMP naming of frAtmDlciEgSp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmDlciEgSpComponentName 1.3.6.1.4.1.562.2.4.1.72.4.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmDlciEgSpStorageType 1.3.6.1.4.1.562.2.4.1.72.4.5.1.1.4
This variable represents the storage type value for the frAtmDlciEgSp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmDlciEgSpIndex 1.3.6.1.4.1.562.2.4.1.72.4.5.1.1.10
This variable represents the index for the frAtmDlciEgSp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmDlciEgSpProvTable 1.3.6.1.4.1.562.2.4.1.72.4.5.10
This group contains the provisionable attributes of the egress direction for the Data Link Connection Identifier. These attributes reflect the service parameters for the egress direction specific to this instance of Dlci.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmDlciEgSpProvEntry

frAtmDlciEgSpProvEntry 1.3.6.1.4.1.562.2.4.1.72.4.5.10.1
An entry in the frAtmDlciEgSpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmDlciEgSpProvEntry  

frAtmDlciEgSpCommittedInformationRate 1.3.6.1.4.1.562.2.4.1.72.4.5.10.1.1
This attribute specifies the committed information rate (CIR) for the egress direction. It is used for bandwidth reservation for the purpose of performing a Call Admission Control (CAC) function towards the egress link. This attribute is not used to perform rate enforcement towards the egress link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciEgSpCommittedBurstSize 1.3.6.1.4.1.562.2.4.1.72.4.5.10.1.2
This attribute specifies the committed burst size (Bc) for the egress direction. It is used for bandwidth reservation for the purpose of performing a Call Admission Control (CAC) function towards the egress link. This attribute is not used to perform rate enforcement towards the egress link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciEgSpExcessBurstSize 1.3.6.1.4.1.562.2.4.1.72.4.5.10.1.3
This attribute specifies the excess burst size (Be) for the egress direction. It is used for bandwidth reservation for the purpose of performing a Call Admission Control (CAC) function towards the egress link. This attribute is not used to perform rate enforcement towards the egress link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50000000  

frAtmDlciEgSpMeasurementInterval 1.3.6.1.4.1.562.2.4.1.72.4.5.10.1.4
This attribute specifies the time interval for the egress direction. It is used for bandwidth reservation for the purpose of performing a Call Admission Control (CAC) function towards the egress link. This attribute is not used to perform rate enforcement towards the egress link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..25500  

frAtmVFramer 1.3.6.1.4.1.562.2.4.1.72.5
OBJECT IDENTIFIER    

frAtmVFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.5.1
This entry controls the addition and deletion of frAtmVFramer components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmVFramerRowStatusEntry

frAtmVFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.5.1.1
A single entry in the table represents a single frAtmVFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmVFramerRowStatusEntry  

frAtmVFramerRowStatus 1.3.6.1.4.1.562.2.4.1.72.5.1.1.1
This variable is used as the basis for SNMP naming of frAtmVFramer components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmVFramerComponentName 1.3.6.1.4.1.562.2.4.1.72.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmVFramerStorageType 1.3.6.1.4.1.562.2.4.1.72.5.1.1.4
This variable represents the storage type value for the frAtmVFramer tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmVFramerIndex 1.3.6.1.4.1.562.2.4.1.72.5.1.1.10
This variable represents the index for the frAtmVFramer tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmVFramerProvTable 1.3.6.1.4.1.562.2.4.1.72.5.10
This group contains provisionable attributes for the VirtualFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmVFramerProvEntry

frAtmVFramerProvEntry 1.3.6.1.4.1.562.2.4.1.72.5.10.1
An entry in the frAtmVFramerProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmVFramerProvEntry  

frAtmVFramerOtherVirtualFramer 1.3.6.1.4.1.562.2.4.1.72.5.10.1.1
This attribute specifies the other VirtualFramer to which the service is linked, for example, FrUni/n VirtualFramer, FrDte/n VirtualFramer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

frAtmVFramerLogicalProcessor 1.3.6.1.4.1.562.2.4.1.72.5.10.1.2
This attribute specifies the logical processor on which the service component will reside.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

frAtmVFramerStateTable 1.3.6.1.4.1.562.2.4.1.72.5.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmVFramerStateEntry

frAtmVFramerStateEntry 1.3.6.1.4.1.562.2.4.1.72.5.11.1
An entry in the frAtmVFramerStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmVFramerStateEntry  

frAtmVFramerAdminState 1.3.6.1.4.1.562.2.4.1.72.5.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

frAtmVFramerOperationalState 1.3.6.1.4.1.562.2.4.1.72.5.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

frAtmVFramerUsageState 1.3.6.1.4.1.562.2.4.1.72.5.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

frAtmVFramerStatsTable 1.3.6.1.4.1.562.2.4.1.72.5.12
This group contains the operational statistics data for a VirtualFramer component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmVFramerStatsEntry

frAtmVFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.72.5.12.1
An entry in the frAtmVFramerStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmVFramerStatsEntry  

frAtmVFramerFrmToOtherVFramer 1.3.6.1.4.1.562.2.4.1.72.5.12.1.2
This attribute counts the frames transmitted to the otherVirtualFramer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

frAtmVFramerFrmFromOtherVFramer 1.3.6.1.4.1.562.2.4.1.72.5.12.1.3
This attribute counts the frames received from the otherVirtualFramer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

frAtmVFramerOctetFromOtherVFramer 1.3.6.1.4.1.562.2.4.1.72.5.12.1.5
This attribute counts the octets received from the otherVirtualFramer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PassportCounter64  

frAtmAddr 1.3.6.1.4.1.562.2.4.1.72.6
OBJECT IDENTIFIER    

frAtmAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.6.1
This entry controls the addition and deletion of frAtmAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmAddrRowStatusEntry

frAtmAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.6.1.1
A single entry in the table represents a single frAtmAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmAddrRowStatusEntry  

frAtmAddrRowStatus 1.3.6.1.4.1.562.2.4.1.72.6.1.1.1
This variable is used as the basis for SNMP naming of frAtmAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmAddrComponentName 1.3.6.1.4.1.562.2.4.1.72.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmAddrStorageType 1.3.6.1.4.1.562.2.4.1.72.6.1.1.4
This variable represents the storage type value for the frAtmAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmAddrIndex 1.3.6.1.4.1.562.2.4.1.72.6.1.1.10
This variable represents the index for the frAtmAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmAddrProvTable 1.3.6.1.4.1.562.2.4.1.72.6.10
This group specifies the address of the FrAtm Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmAddrProvEntry

frAtmAddrProvEntry 1.3.6.1.4.1.562.2.4.1.72.6.10.1
An entry in the frAtmAddrProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmAddrProvEntry  

frAtmAddrAddress 1.3.6.1.4.1.562.2.4.1.72.6.10.1.2
This attribute contains digits which form the unique identifier of the customer. It is the equivalent of the telephone number in the telephone network (either native E.164 or X.121 address formats). For example, E.164 prefix 'e.613722', X.121 prefix 'x.302'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(1..17)  

frAtmAddrAddrOpTable 1.3.6.1.4.1.562.2.4.1.72.6.11
This group display the address of the FrAtm Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmAddrAddrOpEntry

frAtmAddrAddrOpEntry 1.3.6.1.4.1.562.2.4.1.72.6.11.1
An entry in the frAtmAddrAddrOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmAddrAddrOpEntry  

frAtmAddrMyAddress 1.3.6.1.4.1.562.2.4.1.72.6.11.1.1
This attribute displays the parent FRATM component's address in the ISO NSAP format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(40)  

frAtmCa 1.3.6.1.4.1.562.2.4.1.72.7
OBJECT IDENTIFIER    

frAtmCaRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.7.1
This entry controls the addition and deletion of frAtmCa components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaRowStatusEntry

frAtmCaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.7.1.1
A single entry in the table represents a single frAtmCa component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaRowStatusEntry  

frAtmCaRowStatus 1.3.6.1.4.1.562.2.4.1.72.7.1.1.1
This variable is used as the basis for SNMP naming of frAtmCa components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

frAtmCaComponentName 1.3.6.1.4.1.562.2.4.1.72.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmCaStorageType 1.3.6.1.4.1.562.2.4.1.72.7.1.1.4
This variable represents the storage type value for the frAtmCa tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmCaIndex 1.3.6.1.4.1.562.2.4.1.72.7.1.1.10
This variable represents the index for the frAtmCa tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

frAtmCaProvTable 1.3.6.1.4.1.562.2.4.1.72.7.10
This attribute group contains the common provisionable attributes of the Ca component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaProvEntry

frAtmCaProvEntry 1.3.6.1.4.1.562.2.4.1.72.7.10.1
An entry in the frAtmCaProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaProvEntry  

frAtmCaCallAdmissionControl 1.3.6.1.4.1.562.2.4.1.72.7.10.1.1
This attribute specifies the control to turn on Call Admission Control (CAC). The default value for CAC is off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

frAtmCaOverrideLinkRate 1.3.6.1.4.1.562.2.4.1.72.7.10.1.2
This attribute allows the link rate to be overridden for this interface. This allows the user to specify a value other than the actual physical link rate computed when a Framer component is provisioned. In the absence of a Framer component, or when a VirtualFramer component is provisioned, this value needs to be explictly set to provide an equivalent link rate. This attribute provides control on the amount of bandwidth available for performing CAC. This attribute also provides the requested amount of bandwidth that is negotiated across an ATM network for traffic conversion polices 3 and 4, since these policies are a function of the access rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..520000000  

frAtmCaSdTable 1.3.6.1.4.1.562.2.4.1.72.7.11
This group contains provisionable service interworking attributes for the FrAtm component. The attributes defined in this group provide the defaults for all the connections on the FrAtm interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaSdEntry

frAtmCaSdEntry 1.3.6.1.4.1.562.2.4.1.72.7.11.1
An entry in the frAtmCaSdTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaSdEntry  

frAtmCaSdMode 1.3.6.1.4.1.562.2.4.1.72.7.11.1.1
This attribute specifies the mode of interoperability between the Frame Relay and ATM connections regarding upper layer protocol encapsulations. This is used as the default for all the connections on the interface. When translationMode is selected, the interworking function performs translations between RFC1490 and RFC1483 encapsulated headers. This includes routed protocol translation, bridged protocol translation, and connection oriented protocol translation (except for RFC 1490 connection oriented protocol without RFC 1490 header, which is done in speTranslationMode). A value of transparentMode indicates that the interworking function is forwarding data without altering the upper layer user protocol encapsulation. Use transparent mode when the upper layer user protocol encapsulation methods are compatible between terminal equipments. A value of speTranslationMode indicates that the interworking function performs single protocol translation between RFC1490 with no header and RFC1483 encapsulated packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER translationMode(0), transparentMode(1), speTranslationMode(2)  

frAtmCaSdDeToClpMapping 1.3.6.1.4.1.562.2.4.1.72.7.11.1.2
This attribute specifies the DE to CLP mapping that is performed in the Frame Relay to ATM direction. This is used as the default for all the connections on the interface. When preserve is selected, the DE field in a Q.922 core frame copies to the ATM CLP field of every cell containing the information of that frame. When always0 is selected, the CLP field of every generated ATM cell is always 0. When always1 is selected, the CLP field of every generated ATM cell is always 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2)  

frAtmCaSdClpToDeMapping 1.3.6.1.4.1.562.2.4.1.72.7.11.1.3
This attribute specifies the type of CLP to DE mapping that is performed in the ATM to Frame Relay direction. When preserve is selected, the DE field of the Q.922 core frame is set when one or more ATM cells belonging to an AAL5 frame has its CLP field set. When always0 is selected, the DE field of the Q.922 core frame is always set to 0. When always1 is selected, the DE field of the Q.922 core frame is always set to 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2)  

frAtmCaSdFecnToEfciMapping 1.3.6.1.4.1.562.2.4.1.72.7.11.1.4
This attribute specifies the type of FECN to EFCI mapping that is performed in the Frame Relay to ATM direction. When preserve is selected, the FECN field in the Q.922 Core frame maps directly to the ATM EFCI field of every cell generated by the AAL5 segmentation process. When always0 is selected, the EFCI field in every ATM cell generated is set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), preserve(2)  

frAtmCaSdCrToUuMapping 1.3.6.1.4.1.562.2.4.1.72.7.11.1.5
This attribute indicates the type of CR to UU mapping that is performed in the Frame Relay to ATM direction. A value of preserve indicates that the CR field in the Q.922 Core frame maps directly to the ATM UU field of every cell generated by the AAL5 segmentation process. A value of always0 indicates that the UU field in every ATM cell generated is set to 0.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), preserve(2)  

frAtmCaNdTable 1.3.6.1.4.1.562.2.4.1.72.7.12
This group contains the default provisionable networking attributes for the FrAtm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaNdEntry

frAtmCaNdEntry 1.3.6.1.4.1.562.2.4.1.72.7.12.1
An entry in the frAtmCaNdTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaNdEntry  

frAtmCaNdDeToClpMapping 1.3.6.1.4.1.562.2.4.1.72.7.12.1.1
This attribute specifies the type of DE to CLP mapping to be performed in the Frame Relay to ATM direction. When preserve is selected, the DE field in the Q.922 core frame copies to the CLP field of every ATM cell containing the frame. When always0 is selected, the CLP field of every ATM cell is always set to 0. When always1 is selected, the CLP field of every ATM cell is always set to 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always0(0), always1(1), preserve(2)  

frAtmCaNdClpToDeMapping 1.3.6.1.4.1.562.2.4.1.72.7.12.1.2
This attribute specifies the type of CLP to DE mapping to be performed in the ATM to Frame Relay direction. When preserve is selected, the DE field of the Q.922 core frame is set when one or more ATM cells belonging to the frame has its CLP field set, or when the DE field of the FR-SSCS PDU is set. When transparent is selected, the DE field of the Q.922 core frame copies directly from the DE field of the FR-SSCS PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER preserve(2), transparent(3)  

frAtmCaIfQoSTable 1.3.6.1.4.1.562.2.4.1.72.7.13
This attribute group contains the provisionable quality of service attributes for the parent FrAtm interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaIfQoSEntry

frAtmCaIfQoSEntry 1.3.6.1.4.1.562.2.4.1.72.7.13.1
An entry in the frAtmCaIfQoSTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaIfQoSEntry  

frAtmCaSiwfEmissionPriorityToIf 1.3.6.1.4.1.562.2.4.1.72.7.13.1.1
This attribute specifies the emission priority of frames sent to this FrAtm interface from its service interworking functions. Frames in a higher priority queue, designated by a numerically higher number, are sent before frames in a lower priority queue. The value of this attribute is interpreted according to the value of the provisionable attribute numberOfEmissionQs under the parent FrAtm component. If the numberOfEmissionQs attribute is set to 2, siwfEmissionPriorityToIf value of 0 maps to emission priority queue 0 representing a lower priority queue, and siwfEmissionPriorityToIf values of 1, 2 or 3 map to emission priority queue 1 representing the highest priority queue. If the numberOfEmissionQs is set to 4, the siwfEmissionPriorityToIf values directly map to the emission priority queues. A value of deriveFromTp specifies that the emission priority is extracted from the Mod Frs AtmNet Tpm/n component using the siwfTransferPriority attribute. The siwfEmissionPriorityToIf can also be overridden on a per connection basis by setting the emissionPriorityToIf attribute in the FrAtm Dlci Siwf Qos component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), deriveFromTp(254)  

frAtmCaSiwfTransferPriority 1.3.6.1.4.1.562.2.4.1.72.7.13.1.2
This attribute specifies the transfer priority of frames sent to and received from the ATM connection, through the service interworking functions of this interface. In the Frame Relay to ATM direction, the stp selects the ATM service category of the connection. In the ATM to Frame Relay direction, the stp selects the FrAtm emission priority queue. The siwfTransferPriority can also be overridden on a per connection basis by setting the transferPriority atribute in the FrAtm Dlci Siwf Qos component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

frAtmCaNiwfEmissionPriorityToIf 1.3.6.1.4.1.562.2.4.1.72.7.13.1.3
This attribute specifies the emission priority of frames sent to this FrAtm interface from its network interworking functions. Frames in a higher priority queue are sent before frames in a lower priority queue. The value of this attribute is interpreted according to the value of the provisionable attribute numberOfEmissionQs under the parent FrAtm component. If the numberOfEmissionQs attribute is set to 2, niwfEmissionPriorityToIf value of 0 maps to emission priority queue 0 representing a lower priority queue, and niwfEmissionPriorityToIf values of 1, 2 or 3 map to emission priority queue 1 representing the highest priority queue. If the numberOfEmissionQs is set to 4, the emissionPrioToIf values directly assign to the emission priority queues. A value of deriveFromTp specifies that the emission priority is extracted from the Mod Frs AtmNet Tpm/n component using the niwfTransferPriority attribute. The niwfEmissionPriorityToIf can also be overridden on a per connection basis by setting the emissionPriorityToIf atribute in the FrAtm Dlci Niwf Qos component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), deriveFromTp(254)  

frAtmCaNiwfTransferPriority 1.3.6.1.4.1.562.2.4.1.72.7.13.1.4
This attribute specifies the transfer priority of frames sent to and received from the ATM connection, through the network interworking functions of this interface. In the Frame Relay to ATM direction, the ntp selects the Frf5EndPoint which multiplexes the frames. In the ATM to Frame Relay direction, the ntp selects the default FrAtm emission priority queue. The niwfTransferPriority can also be overridden on a per connection basis by setting the transferPriority atribute in the FrAtm Dlci Niwf Qos component.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

frAtmCaOpTable 1.3.6.1.4.1.562.2.4.1.72.7.14
This attribute group contains the operational status of the Ca component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaOpEntry

frAtmCaOpEntry 1.3.6.1.4.1.562.2.4.1.72.7.14.1
An entry in the frAtmCaOpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaOpEntry  

frAtmCaLinkRate 1.3.6.1.4.1.562.2.4.1.72.7.14.1.1
This attribute indicates the link rate. If the provisionable attribute, overrideLinkRate, under the Ca component is 0, then the link rate reported is the actual link rate of the port or channel. Otherwise, the link rate reported is the overrideLinkRate provisioned under the Ca component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..520000000  

frAtmCaNailedUpPvcs 1.3.6.1.4.1.562.2.4.1.72.7.14.1.3
This attribute indicates the number of nailed-Up PVCs currently provisioned on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..5000  

frAtmCaTroubledDlcis 1.3.6.1.4.1.562.2.4.1.72.7.14.1.5
This attribute indicates the total number of DLCIs that are disabled and are experiencing problems. This counter increments as a result of the following problem scenarios: Abit down, PVC down, local CAC failure, or call setup failure due to network problem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..5000  

frAtmCaSoftPvcs 1.3.6.1.4.1.562.2.4.1.72.7.14.1.6
This attribute indicates the number of soft PVCs currently provisioned on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..5000  

frAtmCaAccountingOptionsTable 1.3.6.1.4.1.562.2.4.1.72.7.15
This group contains the common provisioned attributes for accounting on a FrAtm.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaAccountingOptionsEntry

frAtmCaAccountingOptionsEntry 1.3.6.1.4.1.562.2.4.1.72.7.15.1
An entry in the frAtmCaAccountingOptionsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaAccountingOptionsEntry  

frAtmCaAccountClass 1.3.6.1.4.1.562.2.4.1.72.7.15.1.1
This attribute specifies the accounting class, which is reserved for network operations usage. Its value is an arbitrary number. The accounting records the value of this attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

frAtmCaAccountCollection 1.3.6.1.4.1.562.2.4.1.72.7.15.1.2
This attribute controls accounting data collection at the interface level. It contains the following values: bill, test, study, audit, force which are used to specify the reason(s) for which accounting records are collected. If the bill, test, study and audit options are selected in the accountCollection field, accounting records are collected for bill, test, study, or audit purposes. If the force option is selected in the accountCollection field, accounting records are collected regardless of whether other reasons are provisioned. If no reason is provisioned for this attribute, then accounting data collection does not occur. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

frAtmCaServiceExchange 1.3.6.1.4.1.562.2.4.1.72.7.15.1.3
This attribute is an arbitrary number, which is reserved for network operations usage. It is recorded in the accounting record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

frAtmCaBwPoolTable 1.3.6.1.4.1.562.2.4.1.72.7.365
Port capacity is partitioned into 16 pools (pool 0 through pool 15). This attribute specifies the percentage of port capacity that is allowed for each pool. The percentage for each pool ranges from 0% to 1000%. It allows for under or over subscription of the port. Under subscription occurs when the sum of the percentage assigned to the 16 pools is less than 100%. Over subscription occurs when the sum of the percentage for the 16 pools exceeds 100%. The sum of the percentage assigned to the 16 pools cannot exceed 1000%. The default is full sharing of port capacity without pre-set partitions between transfer priorities.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaBwPoolEntry

frAtmCaBwPoolEntry 1.3.6.1.4.1.562.2.4.1.72.7.365.1
An entry in the frAtmCaBwPoolTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaBwPoolEntry  

frAtmCaBwPoolIndex 1.3.6.1.4.1.562.2.4.1.72.7.365.1.1
This variable represents the frAtmCaBwPoolTable specific index for the frAtmCaBwPoolTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

frAtmCaBwPoolValue 1.3.6.1.4.1.562.2.4.1.72.7.365.1.2
This variable represents an individual value for the frAtmCaBwPoolTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000  

frAtmCaPoolProvBwTable 1.3.6.1.4.1.562.2.4.1.72.7.366
This attribute indicates the total bandwidth requested for provisioned connections from each bandwidth pool. Total bandwidth for a given pool can be oversubcribed or undersubcribed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaPoolProvBwEntry

frAtmCaPoolProvBwEntry 1.3.6.1.4.1.562.2.4.1.72.7.366.1
An entry in the frAtmCaPoolProvBwTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaPoolProvBwEntry  

frAtmCaPoolProvBwIndex 1.3.6.1.4.1.562.2.4.1.72.7.366.1.1
This variable represents the frAtmCaPoolProvBwTable specific index for the frAtmCaPoolProvBwTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

frAtmCaPoolProvBwValue 1.3.6.1.4.1.562.2.4.1.72.7.366.1.2
This variable represents an individual value for the frAtmCaPoolProvBwTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..520000000  

frAtmCaPoolAvailBwTable 1.3.6.1.4.1.562.2.4.1.72.7.367
This attribute indicates the total available bandwidth from the bandwidth pool.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaPoolAvailBwEntry

frAtmCaPoolAvailBwEntry 1.3.6.1.4.1.562.2.4.1.72.7.367.1
An entry in the frAtmCaPoolAvailBwTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaPoolAvailBwEntry  

frAtmCaPoolAvailBwIndex 1.3.6.1.4.1.562.2.4.1.72.7.367.1.1
This variable represents the frAtmCaPoolAvailBwTable specific index for the frAtmCaPoolAvailBwTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

frAtmCaPoolAvailBwValue 1.3.6.1.4.1.562.2.4.1.72.7.367.1.2
This variable represents an individual value for the frAtmCaPoolAvailBwTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..52000000  

frAtmCaPoolAdmitBwTable 1.3.6.1.4.1.562.2.4.1.72.7.380
This attribute indicates the total admitted bandwidth from each bandwidth pool. Each value is the sum of the equivalent bit rates of the admitted connections.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaPoolAdmitBwEntry

frAtmCaPoolAdmitBwEntry 1.3.6.1.4.1.562.2.4.1.72.7.380.1
An entry in the frAtmCaPoolAdmitBwTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaPoolAdmitBwEntry  

frAtmCaPoolAdmitBwIndex 1.3.6.1.4.1.562.2.4.1.72.7.380.1.1
This variable represents the frAtmCaPoolAdmitBwTable specific index for the frAtmCaPoolAdmitBwTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

frAtmCaPoolAdmitBwValue 1.3.6.1.4.1.562.2.4.1.72.7.380.1.2
This variable represents an individual value for the frAtmCaPoolAdmitBwTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..520000000  

frAtmCaTpm 1.3.6.1.4.1.562.2.4.1.72.7.2
OBJECT IDENTIFIER    

frAtmCaTpmRowStatusTable 1.3.6.1.4.1.562.2.4.1.72.7.2.1
This entry controls the addition and deletion of frAtmCaTpm components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaTpmRowStatusEntry

frAtmCaTpmRowStatusEntry 1.3.6.1.4.1.562.2.4.1.72.7.2.1.1
A single entry in the table represents a single frAtmCaTpm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaTpmRowStatusEntry  

frAtmCaTpmRowStatus 1.3.6.1.4.1.562.2.4.1.72.7.2.1.1.1
This variable is used as the basis for SNMP naming of frAtmCaTpm components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

frAtmCaTpmComponentName 1.3.6.1.4.1.562.2.4.1.72.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frAtmCaTpmStorageType 1.3.6.1.4.1.562.2.4.1.72.7.2.1.1.4
This variable represents the storage type value for the frAtmCaTpm tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

frAtmCaTpmIndex 1.3.6.1.4.1.562.2.4.1.72.7.2.1.1.10
This variable represents the index for the frAtmCaTpm tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..15  

frAtmCaTpmProvTable 1.3.6.1.4.1.562.2.4.1.72.7.2.10
This attribute group contains the provisionable attributes of the Tpm component at this interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrAtmCaTpmProvEntry

frAtmCaTpmProvEntry 1.3.6.1.4.1.562.2.4.1.72.7.2.10.1
An entry in the frAtmCaTpmProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FrAtmCaTpmProvEntry  

frAtmCaTpmAssignedBandwidthPool 1.3.6.1.4.1.562.2.4.1.72.7.2.10.1.1
This attribute specifies the bandwidth pool that supports this transfer priority at this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), samePoolAsModule(255)  

frAtmCaTpmTrafficParmConvPolicy 1.3.6.1.4.1.562.2.4.1.72.7.2.10.1.2
This attribute specifies the traffic parameter conversion policy to use for a specific transfer priority for specifying equivalent bandwidth rate at the FrAtm interface. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected - ATM service category rtVbr and nrtVbr supported only - PCR0+1 is based on AR - SCR0+1 is based on CIR and EIR - MBS0+1 is based on Bc, Be, CIR, EIR and AR - Takes into account that the instantaneous rate of the Frame Relay stream can be above CIR and up to the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by the UPC traffic policer. - PCR0+1 is based on AR - ATM service category rtVbr and nrtVbr supported only - SCR0 is based on CIR - MBS0 is based on Bc, CIR, and AR - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by the UPC traffic policer. - ATM service category rtVbr and nrtVbr supported only - PCR0+1 is based on CIR for descriptor type 7 - PCR0+1 is based on CIR and EIR for descriptor type 8 - SCR0 is based on CIR - MBS0 is based on Bc, CIR, and AR - The maximum PCR is no longer based on the AR but rather on the CIR and EIR or CIR Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected - ATM service category ubr, cbr, rtVbr and nrtVbr supported only - PCR0+1 is based only on CIR. The default value sameAsModule implies the trafficParmConversionPolicy of Mod Frs AtmNet Tpm/n is as defined as Mod Frs AtmNet Tpm/n.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sameAsModule(0), n3(3), n4(4), n5(5), n6(6)  

frAtmCaTpmAverageFrameSize 1.3.6.1.4.1.562.2.4.1.72.7.2.10.1.3
This attribute specifies the average frame size at the FrAtm interface for connections using this transfer priority. If a value of 0 is specified, the average frame size defined in Mod Frs AtmNet Tpm/n avgFrameSize attribute is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8187  

frameRelayAtmGroup 1.3.6.1.4.1.562.2.4.2.51.1
OBJECT IDENTIFIER    

frameRelayAtmGroupBE 1.3.6.1.4.1.562.2.4.2.51.1.5
OBJECT IDENTIFIER    

frameRelayAtmGroupBE01 1.3.6.1.4.1.562.2.4.2.51.1.5.2
OBJECT IDENTIFIER    

frameRelayAtmGroupBE01A 1.3.6.1.4.1.562.2.4.2.51.1.5.2.2
OBJECT IDENTIFIER    

frameRelayAtmCapabilities 1.3.6.1.4.1.562.2.4.2.51.3
OBJECT IDENTIFIER    

frameRelayAtmCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.51.3.5
OBJECT IDENTIFIER    

frameRelayAtmCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.51.3.5.2
OBJECT IDENTIFIER    

frameRelayAtmCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.51.3.5.2.2
OBJECT IDENTIFIER