Nortel-Magellan-Passport-FraDpnTrunksMIB

File: Nortel-Magellan-Passport-FraDpnTrunksMIB.mib (37538 bytes)

Imported modules

RFC-1212	Nortel-Magellan-Passport-UsefulDefinitionsMIB	Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB	Nortel-Magellan-Passport-DpnTrunksMIB

Imported symbols

OBJECT-TYPE	passportMIBs	Counter32
RowPointer	DisplayString	StorageType
RowStatus	Gauge32	Unsigned32
NonReplicated	Link	dpnGate
dpnGateIndex

Defined Types

DpnGateFrAccessRowStatusEntry
SEQUENCE
	dpnGateFrAccessRowStatus	RowStatus
	dpnGateFrAccessComponentName	DisplayString
	dpnGateFrAccessStorageType	StorageType
	dpnGateFrAccessIndex	NonReplicated

DpnGateFrAccessProvEntry
SEQUENCE
	dpnGateFrAccessMaximumErroredInterval	Unsigned32
	dpnGateFrAccessReceiveErrorSensitivity	Unsigned32

DpnGateFrAccessStateEntry
SEQUENCE
	dpnGateFrAccessAdminState	INTEGER
	dpnGateFrAccessOperationalState	INTEGER
	dpnGateFrAccessUsageState	INTEGER
	dpnGateFrAccessAvailabilityStatus	OCTET STRING
	dpnGateFrAccessProceduralStatus	OCTET STRING
	dpnGateFrAccessControlStatus	OCTET STRING
	dpnGateFrAccessAlarmStatus	OCTET STRING
	dpnGateFrAccessStandbyStatus	INTEGER
	dpnGateFrAccessUnknownStatus	INTEGER

DpnGateFrAccessOpEntry
SEQUENCE
	dpnGateFrAccessRoundTripDelay	Gauge32

DpnGateFrAccessStatsEntry
SEQUENCE
	dpnGateFrAccessReceivedBytesFromIf	Counter32
	dpnGateFrAccessLostFramesFromIf	Counter32
	dpnGateFrAccessDiscardBadFromIf	Counter32
	dpnGateFrAccessDiscardExcessToIf	Counter32

DpnGateFrAccessFrMuxSetupRowStatusEntry
SEQUENCE
	dpnGateFrAccessFrMuxSetupRowStatus	RowStatus
	dpnGateFrAccessFrMuxSetupComponentName	DisplayString
	dpnGateFrAccessFrMuxSetupStorageType	StorageType
	dpnGateFrAccessFrMuxSetupIndex	NonReplicated

DpnGateFrAccessFrMuxSetupTrafficDescrEntry
SEQUENCE
	dpnGateFrAccessFrMuxSetupCommittedInformationRate	Unsigned32
	dpnGateFrAccessFrMuxSetupCommittedBurstSize	Unsigned32
	dpnGateFrAccessFrMuxSetupMaximumFrameSize	Unsigned32

DpnGateFrAccessFrMuxSetupDlciCompNameOpEntry
SEQUENCE
	dpnGateFrAccessFrMuxSetupDlciCompName	RowPointer

DpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry
SEQUENCE
	dpnGateFrAccessFrMuxSetupPvcSetupRowStatus	RowStatus
	dpnGateFrAccessFrMuxSetupPvcSetupComponentName	DisplayString
	dpnGateFrAccessFrMuxSetupPvcSetupStorageType	StorageType
	dpnGateFrAccessFrMuxSetupPvcSetupIndex	NonReplicated

DpnGateFrAccessFrMuxSetupPvcSetupProvEntry
SEQUENCE
	dpnGateFrAccessFrMuxSetupPvcSetupDlciName	Link

Defined Values

fraDpnTrunksMIB		1.3.6.1.4.1.562.2.4.2.68
OBJECT IDENTIFIER

dpnGateFrAccess		1.3.6.1.4.1.562.2.4.1.61.4
OBJECT IDENTIFIER

dpnGateFrAccessRowStatusTable		1.3.6.1.4.1.562.2.4.1.61.4.1
This entry controls the addition and deletion of dpnGateFrAccess components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessRowStatusEntry

dpnGateFrAccessRowStatusEntry		1.3.6.1.4.1.562.2.4.1.61.4.1.1
A single entry in the table represents a single dpnGateFrAccess component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessRowStatusEntry

dpnGateFrAccessRowStatus		1.3.6.1.4.1.562.2.4.1.61.4.1.1.1
This variable is used as the basis for SNMP naming of dpnGateFrAccess components. These components can be added and deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

dpnGateFrAccessComponentName		1.3.6.1.4.1.562.2.4.1.61.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

dpnGateFrAccessStorageType		1.3.6.1.4.1.562.2.4.1.61.4.1.1.4
This variable represents the storage type value for the dpnGateFrAccess tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

dpnGateFrAccessIndex		1.3.6.1.4.1.562.2.4.1.61.4.1.1.10
This variable represents the index for the dpnGateFrAccess tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

dpnGateFrAccessProvTable		1.3.6.1.4.1.562.2.4.1.61.4.10
This group of provisionable attributes contains the parameters used by Unacknowledged, Utp, and FrAccess for monitoring link quality.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessProvEntry

dpnGateFrAccessProvEntry		1.3.6.1.4.1.562.2.4.1.61.4.10.1
An entry in the dpnGateFrAccessProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessProvEntry

dpnGateFrAccessMaximumErroredInterval		1.3.6.1.4.1.562.2.4.1.61.4.10.1.1
This attribute specifies the interval time over which the error threshold (as specified by receiveErrorSensitivity) must be continuously exceeded before the Unacknowledged, Utp, or FrAccess component can be degraded. Once the error interval count exceeds the provisioned value, the Unacknowledged, Utp, or FrAccess component issues an alarm indicating that link quality has degraded, and it disables its parent component. The exception to this is a value of zero, the default, which indicates that the mechanism is completely disabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0 \| 1..15

dpnGateFrAccessReceiveErrorSensitivity		1.3.6.1.4.1.562.2.4.1.61.4.10.1.2
This attribute is the allowable error rate beyond which the Unacknowledged, Utp, or FrAccess component can be degraded if it persists for a duration longer than the maximumErrorInterval. The threshold is expressed as a percentage of number of errored frames in the last interval per number of frames received in the last interval. The exception to this is a value of zero, which indicates that the mechanism is completely disabled. The configurable values are: 0 = the mechanism is completely disabled 1 = 1/(21) 2 = 1/(22) 3 = 1/(23) : 10 = 1/(210)
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	0 \| 1..10

dpnGateFrAccessStateTable		1.3.6.1.4.1.562.2.4.1.61.4.11
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessStateEntry

dpnGateFrAccessStateEntry		1.3.6.1.4.1.562.2.4.1.61.4.11.1
An entry in the dpnGateFrAccessStateTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessStateEntry

dpnGateFrAccessAdminState		1.3.6.1.4.1.562.2.4.1.61.4.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	locked(0), unlocked(1), shuttingDown(2)

dpnGateFrAccessOperationalState		1.3.6.1.4.1.562.2.4.1.61.4.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

dpnGateFrAccessUsageState		1.3.6.1.4.1.562.2.4.1.61.4.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(0), active(1), busy(2)

dpnGateFrAccessAvailabilityStatus		1.3.6.1.4.1.562.2.4.1.61.4.11.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

dpnGateFrAccessProceduralStatus		1.3.6.1.4.1.562.2.4.1.61.4.11.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

dpnGateFrAccessControlStatus		1.3.6.1.4.1.562.2.4.1.61.4.11.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

dpnGateFrAccessAlarmStatus		1.3.6.1.4.1.562.2.4.1.61.4.11.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

dpnGateFrAccessStandbyStatus		1.3.6.1.4.1.562.2.4.1.61.4.11.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hotStandby(0), coldStandby(1), providingService(2), notSet(15)

dpnGateFrAccessUnknownStatus		1.3.6.1.4.1.562.2.4.1.61.4.11.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

dpnGateFrAccessOpTable		1.3.6.1.4.1.562.2.4.1.61.4.12
This group of attributes contains the set of LTP operational parameters measured and maintained by this component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessOpEntry

dpnGateFrAccessOpEntry		1.3.6.1.4.1.562.2.4.1.61.4.12.1
An entry in the dpnGateFrAccessOpTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessOpEntry

dpnGateFrAccessRoundTripDelay		1.3.6.1.4.1.562.2.4.1.61.4.12.1.1
This is the measured Round Trip Delay (ms) discovered with the remote through the LTP staging protocol. The value includes emission, propagation, and queuing delays. A 2 byte control frame is used to perform the measurement. A value of zero is displayed when the link is disabled or the measured Round Trip Delay is unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge32	0..1500

dpnGateFrAccessStatsTable		1.3.6.1.4.1.562.2.4.1.61.4.13
This group contains the operational statistics for FrAccess.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessStatsEntry

dpnGateFrAccessStatsEntry		1.3.6.1.4.1.562.2.4.1.61.4.13.1
An entry in the dpnGateFrAccessStatsTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessStatsEntry

dpnGateFrAccessReceivedBytesFromIf		1.3.6.1.4.1.562.2.4.1.61.4.13.1.1
This attribute counts the number of bytes received by FrAccess in information frames. When the maximum count is reached the count wraps to zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

dpnGateFrAccessLostFramesFromIf		1.3.6.1.4.1.562.2.4.1.61.4.13.1.2
This attribute counts the frames lost in the direction from interface, the loss of which is detected based on the sequence number mechanism. The reason for a loss may be the congestion-related loss in the external frame relay network, or errors/congestion developing in the FrMux service. When FrMux statistics do not show errors/congestion developing internally in FrMux, then the losses visible through this statistic should be attributed to the external frame relay network. When the maximum count is reached the count wraps to zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

dpnGateFrAccessDiscardBadFromIf		1.3.6.1.4.1.562.2.4.1.61.4.13.1.3
This attribute counts the number of frames discarded in the direction 'from interface', because they are unknown to the FrAccess protocol. When the maximum count is reached the count wraps to zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

dpnGateFrAccessDiscardExcessToIf		1.3.6.1.4.1.562.2.4.1.61.4.13.1.4
This attribute counts the number of frames discarded in the direction 'to interface' because of congestion on the transmit queue. When the maximum count is reached the count wraps to zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

dpnGateFrAccessFrMuxSetup		1.3.6.1.4.1.562.2.4.1.61.4.2
OBJECT IDENTIFIER

dpnGateFrAccessFrMuxSetupRowStatusTable		1.3.6.1.4.1.562.2.4.1.61.4.2.1
This entry controls the addition and deletion of dpnGateFrAccessFrMuxSetup components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessFrMuxSetupRowStatusEntry

dpnGateFrAccessFrMuxSetupRowStatusEntry		1.3.6.1.4.1.562.2.4.1.61.4.2.1.1
A single entry in the table represents a single dpnGateFrAccessFrMuxSetup component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessFrMuxSetupRowStatusEntry

dpnGateFrAccessFrMuxSetupRowStatus		1.3.6.1.4.1.562.2.4.1.61.4.2.1.1.1
This variable is used as the basis for SNMP naming of dpnGateFrAccessFrMuxSetup components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

dpnGateFrAccessFrMuxSetupComponentName		1.3.6.1.4.1.562.2.4.1.61.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

dpnGateFrAccessFrMuxSetupStorageType		1.3.6.1.4.1.562.2.4.1.61.4.2.1.1.4
This variable represents the storage type value for the dpnGateFrAccessFrMuxSetup tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

dpnGateFrAccessFrMuxSetupIndex		1.3.6.1.4.1.562.2.4.1.61.4.2.1.1.10
This variable represents the index for the dpnGateFrAccessFrMuxSetup tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

dpnGateFrAccessFrMuxSetupTrafficDescrTable		1.3.6.1.4.1.562.2.4.1.61.4.2.10
This group contains the provisionable attributes for the application of which this FrMuxSetup is a subcomponent. The parameters are used for maximum frame size checking and traffic shaping and are to be passed over to FrMux Dlci associated with the application. The attributes in this group are defined in T1.606 Addendum 1.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessFrMuxSetupTrafficDescrEntry

dpnGateFrAccessFrMuxSetupTrafficDescrEntry		1.3.6.1.4.1.562.2.4.1.61.4.2.10.1
An entry in the dpnGateFrAccessFrMuxSetupTrafficDescrTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessFrMuxSetupTrafficDescrEntry

dpnGateFrAccessFrMuxSetupCommittedInformationRate		1.3.6.1.4.1.562.2.4.1.61.4.2.10.1.1
This attribute specifies, in bit/s, the committed information rate (CIR) to which the traffic transmitted towards the interface is shaped. The minimum value is 4800 bit/s.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	4800..2048000

dpnGateFrAccessFrMuxSetupCommittedBurstSize		1.3.6.1.4.1.562.2.4.1.61.4.2.10.1.2
THIS ATTRIBUTE IS NOT BEING USED.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32	0..2048000

dpnGateFrAccessFrMuxSetupMaximumFrameSize		1.3.6.1.4.1.562.2.4.1.61.4.2.10.1.3
This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in this definition. This attribute corresponds to the dN1 parameter described in the Vendor Forum Specification.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Unsigned32	1..4096

dpnGateFrAccessFrMuxSetupDlciCompNameOpTable		1.3.6.1.4.1.562.2.4.1.61.4.2.11
This group contains the component name of the Dlci which carries the traffic for this application.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessFrMuxSetupDlciCompNameOpEntry

dpnGateFrAccessFrMuxSetupDlciCompNameOpEntry		1.3.6.1.4.1.562.2.4.1.61.4.2.11.1
An entry in the dpnGateFrAccessFrMuxSetupDlciCompNameOpTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessFrMuxSetupDlciCompNameOpEntry

dpnGateFrAccessFrMuxSetupDlciCompName		1.3.6.1.4.1.562.2.4.1.61.4.2.11.1.1
This attribute specifies the component name of the Dlci with which the application using this FrMuxSetup component is associated. The name is a string FrMux/n Dlci/m. For a PVC this is the same component name as provisioned under the subcomponent FrMuxPvcSetup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowPointer

dpnGateFrAccessFrMuxSetupPvcSetup		1.3.6.1.4.1.562.2.4.1.61.4.2.2
OBJECT IDENTIFIER

dpnGateFrAccessFrMuxSetupPvcSetupRowStatusTable		1.3.6.1.4.1.562.2.4.1.61.4.2.2.1
This entry controls the addition and deletion of dpnGateFrAccessFrMuxSetupPvcSetup components.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry

dpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry		1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1
A single entry in the table represents a single dpnGateFrAccessFrMuxSetupPvcSetup component.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry

dpnGateFrAccessFrMuxSetupPvcSetupRowStatus		1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1.1
This variable is used as the basis for SNMP naming of dpnGateFrAccessFrMuxSetupPvcSetup components. These components cannot be added nor deleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RowStatus

dpnGateFrAccessFrMuxSetupPvcSetupComponentName		1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

dpnGateFrAccessFrMuxSetupPvcSetupStorageType		1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1.4
This variable represents the storage type value for the dpnGateFrAccessFrMuxSetupPvcSetup tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	StorageType

dpnGateFrAccessFrMuxSetupPvcSetupIndex		1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1.10
This variable represents the index for the dpnGateFrAccessFrMuxSetupPvcSetup tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	NonReplicated

dpnGateFrAccessFrMuxSetupPvcSetupProvTable		1.3.6.1.4.1.562.2.4.1.61.4.2.2.10
This group contains provisionable attributes for setting up a Dlci associated with the application using the FrMuxSetup component. The Dlci is of the PVC type.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DpnGateFrAccessFrMuxSetupPvcSetupProvEntry

dpnGateFrAccessFrMuxSetupPvcSetupProvEntry		1.3.6.1.4.1.562.2.4.1.61.4.2.2.10.1
An entry in the dpnGateFrAccessFrMuxSetupPvcSetupProvTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DpnGateFrAccessFrMuxSetupPvcSetupProvEntry

dpnGateFrAccessFrMuxSetupPvcSetupDlciName		1.3.6.1.4.1.562.2.4.1.61.4.2.2.10.1.1
This attribute is the link to the Dlci which is associated with the application using the FrMuxSetup component.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Link

fraDpnTrunksGroup		1.3.6.1.4.1.562.2.4.2.68.1
OBJECT IDENTIFIER

fraDpnTrunksGroupBE		1.3.6.1.4.1.562.2.4.2.68.1.5
OBJECT IDENTIFIER

fraDpnTrunksGroupBE00		1.3.6.1.4.1.562.2.4.2.68.1.5.1
OBJECT IDENTIFIER

fraDpnTrunksGroupBE00A		1.3.6.1.4.1.562.2.4.2.68.1.5.1.2
OBJECT IDENTIFIER

fraDpnTrunksCapabilities		1.3.6.1.4.1.562.2.4.2.68.3
OBJECT IDENTIFIER

fraDpnTrunksCapabilitiesBE		1.3.6.1.4.1.562.2.4.2.68.3.5
OBJECT IDENTIFIER

fraDpnTrunksCapabilitiesBE00		1.3.6.1.4.1.562.2.4.2.68.3.5.1
OBJECT IDENTIFIER

fraDpnTrunksCapabilitiesBE00A		1.3.6.1.4.1.562.2.4.2.68.3.5.1.2
OBJECT IDENTIFIER

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor