Nortel-Magellan-Passport-DisdnNI2MIB
File:
Nortel-Magellan-Passport-DisdnNI2MIB.mib (27957 bytes)
Imported modules
Imported symbols
Defined Types
| DataSigChanNi2RowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
dataSigChanNi2RowStatus |
RowStatus |
|
| |
dataSigChanNi2ComponentName |
DisplayString |
|
| |
dataSigChanNi2StorageType |
StorageType |
|
| |
dataSigChanNi2Index |
NonReplicated |
|
| DataSigChanNi2L2Entry |
|
| SEQUENCE |
|
|
|
| |
dataSigChanNi2T23 |
Unsigned32 |
|
| |
dataSigChanNi2T200 |
Unsigned32 |
|
| |
dataSigChanNi2N200 |
Unsigned32 |
|
| |
dataSigChanNi2T203 |
Unsigned32 |
|
| |
dataSigChanNi2N201 |
Unsigned32 |
|
| |
dataSigChanNi2CircuitSwitchedK |
Unsigned32 |
|
| DataSigChanNi2ProvEntry |
|
| SEQUENCE |
|
|
|
| |
dataSigChanNi2Side |
INTEGER |
|
| DataSigChanNi2OperEntry |
|
| SEQUENCE |
|
|
|
| |
dataSigChanNi2ActiveChannels |
Unsigned32 |
|
| |
dataSigChanNi2PeakActiveChannels |
Unsigned32 |
|
| |
dataSigChanNi2DChanStatus |
INTEGER |
|
| DataSigChanNi2FramerRowStatusEntry |
|
| SEQUENCE |
|
|
|
| |
dataSigChanNi2FramerRowStatus |
RowStatus |
|
| |
dataSigChanNi2FramerComponentName |
DisplayString |
|
| |
dataSigChanNi2FramerStorageType |
StorageType |
|
| |
dataSigChanNi2FramerIndex |
NonReplicated |
|
| DataSigChanNi2FramerProvEntry |
|
| SEQUENCE |
|
|
|
| |
dataSigChanNi2FramerInterfaceName |
Link |
|
| DataSigChanNi2FramerStateEntry |
|
| SEQUENCE |
|
|
|
| |
dataSigChanNi2FramerAdminState |
INTEGER |
|
| |
dataSigChanNi2FramerOperationalState |
INTEGER |
|
| |
dataSigChanNi2FramerUsageState |
INTEGER |
|
| DataSigChanNi2FramerStatsEntry |
|
| SEQUENCE |
|
|
|
| |
dataSigChanNi2FramerFrmToIf |
Unsigned32 |
|
| |
dataSigChanNi2FramerFrmFromIf |
Unsigned32 |
|
| |
dataSigChanNi2FramerOctetFromIf |
Unsigned32 |
|
| |
dataSigChanNi2FramerAborts |
Unsigned32 |
|
| |
dataSigChanNi2FramerCrcErrors |
Unsigned32 |
|
| |
dataSigChanNi2FramerLrcErrors |
Unsigned32 |
|
| |
dataSigChanNi2FramerNonOctetErrors |
Unsigned32 |
|
| |
dataSigChanNi2FramerOverruns |
Unsigned32 |
|
| |
dataSigChanNi2FramerUnderruns |
Unsigned32 |
|
| |
dataSigChanNi2FramerLargeFrmErrors |
Unsigned32 |
|
Defined Values
| disdnNI2MIB |
1.3.6.1.4.1.562.2.4.2.126 |
| OBJECT IDENTIFIER |
|
|
|
| dataSigChanNi2RowStatusEntry |
1.3.6.1.4.1.562.2.4.1.120.12.1.1 |
| A single entry in the table represents a single
dataSigChanNi2 component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DataSigChanNi2RowStatusEntry |
|
|
| dataSigChanNi2RowStatus |
1.3.6.1.4.1.562.2.4.1.120.12.1.1.1 |
| This variable is used as the basis for SNMP naming of
dataSigChanNi2 components.
These components can be added and deleted. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| dataSigChanNi2ComponentName |
1.3.6.1.4.1.562.2.4.1.120.12.1.1.2 |
| This variable provides the component's string name for
use with the ASCII Console Interface |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| dataSigChanNi2StorageType |
1.3.6.1.4.1.562.2.4.1.120.12.1.1.4 |
| This variable represents the storage type value for the
dataSigChanNi2 tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| dataSigChanNi2Index |
1.3.6.1.4.1.562.2.4.1.120.12.1.1.10 |
| This variable represents the index for the dataSigChanNi2 tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| dataSigChanNi2L2Table |
1.3.6.1.4.1.562.2.4.1.120.12.11 |
| This group represents the provisionable Layer 2 attributes of the
Q931 CCITT protocol. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DataSigChanNi2L2Entry |
|
| dataSigChanNi2L2Entry |
1.3.6.1.4.1.562.2.4.1.120.12.11.1 |
| An entry in the dataSigChanNi2L2Table. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DataSigChanNi2L2Entry |
|
|
| dataSigChanNi2T23 |
1.3.6.1.4.1.562.2.4.1.120.12.11.1.1 |
| This attribute specifies the layer2 enable request timer. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..15 |
|
| dataSigChanNi2T200 |
1.3.6.1.4.1.562.2.4.1.120.12.11.1.2 |
| This attribute specifies the maximum time between a layer 2 frame
and its acknowledgement |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..20 |
|
| dataSigChanNi2N200 |
1.3.6.1.4.1.562.2.4.1.120.12.11.1.3 |
| This attribute specifies the maximum number of re-transmissions of
a layer2 frame. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..8 |
|
| dataSigChanNi2T203 |
1.3.6.1.4.1.562.2.4.1.120.12.11.1.4 |
| This attribute specifies the maximum time that a no layer 2 traffic
situation can last. Expiry triggers a check on whether the far end is
a live. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
2..40 |
|
| dataSigChanNi2N201 |
1.3.6.1.4.1.562.2.4.1.120.12.11.1.5 |
| This attribute specifies the maximum number of octets in an
information field. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
4..260 |
|
| dataSigChanNi2CircuitSwitchedK |
1.3.6.1.4.1.562.2.4.1.120.12.11.1.6 |
| This attribute specifies the maximum number of frames for B
channel use. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..632 |
|
| dataSigChanNi2ProvEntry |
1.3.6.1.4.1.562.2.4.1.120.12.13.1 |
| An entry in the dataSigChanNi2ProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DataSigChanNi2ProvEntry |
|
|
| dataSigChanNi2Side |
1.3.6.1.4.1.562.2.4.1.120.12.13.1.1 |
| This attribute specifies whether the layer 2 HDLC interface is the
network or user side of the connection. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
network(1), user(2) |
|
| dataSigChanNi2OperEntry |
1.3.6.1.4.1.562.2.4.1.120.12.15.1 |
| An entry in the dataSigChanNi2OperTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DataSigChanNi2OperEntry |
|
|
| dataSigChanNi2ActiveChannels |
1.3.6.1.4.1.562.2.4.1.120.12.15.1.1 |
| This attribute indicates the number of currently active channels.
This includes data and voice channels. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..128 |
|
| dataSigChanNi2PeakActiveChannels |
1.3.6.1.4.1.562.2.4.1.120.12.15.1.4 |
| This attribute indicates the maximum number of channels that have
been active on this signalling channel during the last polling period. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..128 |
|
| dataSigChanNi2DChanStatus |
1.3.6.1.4.1.562.2.4.1.120.12.15.1.7 |
| This attribute indicates the state of the D-channel.
outOfService means that there is no layer 2 or layer 3 connectivity
to the PBX.
establishing means that the signalling channel is attempting to stage
the layer 2.
established means that the layer 2 is enabled. If the signalling
channel stays in the established state, then it is waiting for a restart
from the PBX.
enabling means that the resources for processing calls are being
initialized. If the signalling channel stays in the enabling state then
it is waiting for a restart acknowledgement from the PBX.
inService means that the resources for processing calls are
available.
restarting means that the resources for call processing are being rei-
initialized. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5) |
|
| dataSigChanNi2Tracing |
1.3.6.1.4.1.562.2.4.1.120.12.16.1.1 |
| This attribute defines which types of tracing are active for this
signalling channel. The tracing messages are sent to the debug
stream. To see the messages the agentQueue attribute in Col/debug
must be greater than 0 and a Telnet NMIS session must list the
debug stream in in its data streams (ex. set nmis telnet session/1
dataStreams debug). Different types of tracing can be enabled
simultaneously.
Note that tracing consumes additional CPU resources and will slow
down call processing on a heavily loaded card. If there is message
block exhaustion tracing will be suspended for a period and then
automatically reenabled. An alarm is generated on tracing
suspension and resumption. This mechanism protects the function
processor against excessive numbers of tracing messages.
Types of tracing include:
protocolErrors - get details of any protocol errors which are
occuring. Protocol errors are also reported in summary form as
alarms.
q931Summary - Summary of the Q.931 messages on the signalling
link, including certain call details (calling number, called number,
release codes).
q931Hex - Q.931 messages displayed in hex format. Useful to
determine protocol compliance in case of errors reported on local or
remote ends.
q931Symbolic - Q.931 messages parsed to give maximum detail.
Useful for understanding content of messages flowing on the link.
portHex - Messages in hex format being sent and received on the
link.
Description of bits:
protocolErrors(0)
q931Summary(1)
q931Hex(2)
q931Symbolic(3)
portHex(4) |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1) |
|
| dataSigChanNi2FramerRowStatusEntry |
1.3.6.1.4.1.562.2.4.1.120.12.2.1.1 |
| A single entry in the table represents a single
dataSigChanNi2Framer component. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DataSigChanNi2FramerRowStatusEntry |
|
|
| dataSigChanNi2FramerRowStatus |
1.3.6.1.4.1.562.2.4.1.120.12.2.1.1.1 |
| This variable is used as the basis for SNMP naming of
dataSigChanNi2Framer components.
These components cannot be added nor deleted. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| dataSigChanNi2FramerStorageType |
1.3.6.1.4.1.562.2.4.1.120.12.2.1.1.4 |
| This variable represents the storage type value for the
dataSigChanNi2Framer tables. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
StorageType |
|
|
| dataSigChanNi2FramerIndex |
1.3.6.1.4.1.562.2.4.1.120.12.2.1.1.10 |
| This variable represents the index for the dataSigChanNi2Framer tables. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
NonReplicated |
|
|
| dataSigChanNi2FramerProvTable |
1.3.6.1.4.1.562.2.4.1.120.12.2.10 |
| This group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DataSigChanNi2FramerProvEntry |
|
| dataSigChanNi2FramerProvEntry |
1.3.6.1.4.1.562.2.4.1.120.12.2.10.1 |
| An entry in the dataSigChanNi2FramerProvTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DataSigChanNi2FramerProvEntry |
|
|
| dataSigChanNi2FramerInterfaceName |
1.3.6.1.4.1.562.2.4.1.120.12.2.10.1.1 |
| This attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run. |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Link |
|
|
| dataSigChanNi2FramerStateTable |
1.3.6.1.4.1.562.2.4.1.120.12.2.12 |
| This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DataSigChanNi2FramerStateEntry |
|
| dataSigChanNi2FramerStateEntry |
1.3.6.1.4.1.562.2.4.1.120.12.2.12.1 |
| An entry in the dataSigChanNi2FramerStateTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DataSigChanNi2FramerStateEntry |
|
|
| dataSigChanNi2FramerAdminState |
1.3.6.1.4.1.562.2.4.1.120.12.2.12.1.1 |
| This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
locked(0), unlocked(1), shuttingDown(2) |
|
| dataSigChanNi2FramerOperationalState |
1.3.6.1.4.1.562.2.4.1.120.12.2.12.1.2 |
| This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(0), enabled(1) |
|
| dataSigChanNi2FramerUsageState |
1.3.6.1.4.1.562.2.4.1.120.12.2.12.1.3 |
| This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(0), active(1), busy(2) |
|
| dataSigChanNi2FramerStatsEntry |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1 |
| An entry in the dataSigChanNi2FramerStatsTable. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DataSigChanNi2FramerStatsEntry |
|
|
| dataSigChanNi2FramerFrmToIf |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.1 |
| This attribute counts the number of frames transmitted to the link
interface by Framer.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerFrmFromIf |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.2 |
| This attribute counts the number of frames received from the link
interface by Framer.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerOctetFromIf |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.3 |
| The number of bytes received from the link interface by Framer. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerAborts |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.4 |
| This attribute counts the total number of aborts received.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerCrcErrors |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.5 |
| This attribute counts the total number of frames with CRC errors.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerLrcErrors |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.6 |
| This attribute counts the total number of frames with LRC errors.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerNonOctetErrors |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.7 |
| This attribute counts the total number of frames that were non octet
aligned.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerOverruns |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.8 |
| This attribute counts the total number of frames received from the
link for which overruns occurred.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerUnderruns |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.9 |
| This attribute counts the total number of frames transmitted to the
link for which underruns occurred.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|
| dataSigChanNi2FramerLargeFrmErrors |
1.3.6.1.4.1.562.2.4.1.120.12.2.13.1.10 |
| This attribute counts the total number of frames received which
were too large. The frame was longer than 500 bytes.
This count wraps to zero after reaching its maximum value. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..4294967295 |
|