NNC-ATM-STATISTICS-MIB

File: NNC-ATM-STATISTICS-MIB.mib (117131 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB NNCGNI0001-SMI ATM-MIB
NNC-INTERVAL-STATISTICS-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter64 RowStatus MODULE-COMPLIANCE
OBJECT-GROUP ifIndex nncExtensions
NncExtCounter64 atmVplVpi atmVclVpi
atmVclVci NncExtIntvlStateType NncExtAbsIntvlNumberType
NncExtRelIntvlNumberType

Defined Types

NncVpl15MinCurrentEntry  
SEQUENCE    
  nncVpl15MinCurrentState NncExtIntvlStateType
  nncVpl15MinCurrentAbsoluteIntervalNumber NncExtAbsIntvlNumberType
  nncVpl15MinCurrentClp0And1InCells NncExtCounter64
  nncVpl15MinCurrentClp0InCells NncExtCounter64
  nncVpl15MinCurrentDiscardClp0And1InCells NncExtCounter64
  nncVpl15MinCurrentDiscardClp0InCells NncExtCounter64
  nncVpl15MinCurrentTaggedInCells NncExtCounter64
  nncVpl15MinCurrentClp0And1OutCells NncExtCounter64
  nncVpl15MinCurrentClp0OutCells NncExtCounter64

NncVpl15MinIntervalEntry  
SEQUENCE    
  nncVpl15MinIntervalNumber NncExtRelIntvlNumberType
  nncVpl15MinIntervalState NncExtIntvlStateType
  nncVpl15MinIntervalAbsoluteIntervalNumber NncExtAbsIntvlNumberType
  nncVpl15MinIntervalClp0And1InCells NncExtCounter64
  nncVpl15MinIntervalClp0InCells NncExtCounter64
  nncVpl15MinIntervalDiscardClp0And1InCells NncExtCounter64
  nncVpl15MinIntervalDiscardClp0InCells NncExtCounter64
  nncVpl15MinIntervalTaggedInCells NncExtCounter64
  nncVpl15MinIntervalClp0And1OutCells NncExtCounter64
  nncVpl15MinIntervalClp0OutCells NncExtCounter64

NncVpl1HourCurrentEntry  
SEQUENCE    
  nncVpl1HourCurrentState NncExtIntvlStateType
  nncVpl1HourCurrentAbsoluteIntervalNumber NncExtAbsIntvlNumberType
  nncVpl1HourCurrentClp0And1InCells NncExtCounter64
  nncVpl1HourCurrentClp0InCells NncExtCounter64
  nncVpl1HourCurrentDiscardClp0And1InCells NncExtCounter64
  nncVpl1HourCurrentDiscardClp0InCells NncExtCounter64
  nncVpl1HourCurrentTaggedInCells NncExtCounter64
  nncVpl1HourCurrentClp0And1OutCells NncExtCounter64
  nncVpl1HourCurrentClp0OutCells NncExtCounter64
  nncVpl1HourCurrentRowStatus RowStatus

NncVpl1HourIntervalEntry  
SEQUENCE    
  nncVpl1HourIntervalNumber NncExtRelIntvlNumberType
  nncVpl1HourIntervalState NncExtIntvlStateType
  nncVpl1HourIntervalAbsoluteIntervalNumber NncExtAbsIntvlNumberType
  nncVpl1HourIntervalClp0And1InCells NncExtCounter64
  nncVpl1HourIntervalClp0InCells NncExtCounter64
  nncVpl1HourIntervalDiscardClp0And1InCells NncExtCounter64
  nncVpl1HourIntervalDiscardClp0InCells NncExtCounter64
  nncVpl1HourIntervalTaggedInCells NncExtCounter64
  nncVpl1HourIntervalClp0And1OutCells NncExtCounter64
  nncVpl1HourIntervalClp0OutCells NncExtCounter64

NncVplStatEntry  
SEQUENCE    
  nncVplStatClp0And1InCells NncExtCounter64
  nncVplStatClp0InCells NncExtCounter64
  nncVplStatDiscardClp0And1InCells NncExtCounter64
  nncVplStatDiscardClp0InCells NncExtCounter64
  nncVplStatTaggedInCells NncExtCounter64
  nncVplStatClp0And1OutCells NncExtCounter64
  nncVplStatClp0OutCells NncExtCounter64

NncVcl15MinCurrentEntry  
SEQUENCE    
  nncVcl15MinCurrentState NncExtIntvlStateType
  nncVcl15MinCurrentAbsoluteIntervalNumber NncExtAbsIntvlNumberType
  nncVcl15MinCurrentClp0And1InCells NncExtCounter64
  nncVcl15MinCurrentClp0InCells NncExtCounter64
  nncVcl15MinCurrentDiscardClp0And1InCells NncExtCounter64
  nncVcl15MinCurrentDiscardClp0InCells NncExtCounter64
  nncVcl15MinCurrentTaggedInCells NncExtCounter64
  nncVcl15MinCurrentClp0And1OutCells NncExtCounter64
  nncVcl15MinCurrentClp0OutCells NncExtCounter64

NncVcl15MinIntervalEntry  
SEQUENCE    
  nncVcl15MinIntervalNumber NncExtRelIntvlNumberType
  nncVcl15MinIntervalState NncExtIntvlStateType
  nncVcl15MinIntervalAbsoluteIntervalNumber NncExtAbsIntvlNumberType
  nncVcl15MinIntervalClp0And1InCells NncExtCounter64
  nncVcl15MinIntervalClp0InCells NncExtCounter64
  nncVcl15MinIntervalDiscardClp0And1InCells NncExtCounter64
  nncVcl15MinIntervalDiscardClp0InCells NncExtCounter64
  nncVcl15MinIntervalTaggedInCells NncExtCounter64
  nncVcl15MinIntervalClp0And1OutCells NncExtCounter64
  nncVcl15MinIntervalClp0OutCells NncExtCounter64

NncVcl1HourCurrentEntry  
SEQUENCE    
  nncVcl1HourCurrentState NncExtIntvlStateType
  nncVcl1HourCurrentAbsoluteIntervalNumber NncExtAbsIntvlNumberType
  nncVcl1HourCurrentClp0And1InCells NncExtCounter64
  nncVcl1HourCurrentClp0InCells NncExtCounter64
  nncVcl1HourCurrentDiscardClp0And1InCells NncExtCounter64
  nncVcl1HourCurrentDiscardClp0InCells NncExtCounter64
  nncVcl1HourCurrentTaggedInCells NncExtCounter64
  nncVcl1HourCurrentClp0And1OutCells NncExtCounter64
  nncVcl1HourCurrentClp0OutCells NncExtCounter64
  nncVcl1HourCurrentRowStatus RowStatus

NncVcl1HourIntervalEntry  
SEQUENCE    
  nncVcl1HourIntervalNumber NncExtRelIntvlNumberType
  nncVcl1HourIntervalState NncExtIntvlStateType
  nncVcl1HourIntervalAbsoluteIntervalNumber NncExtAbsIntvlNumberType
  nncVcl1HourIntervalClp0And1InCells NncExtCounter64
  nncVcl1HourIntervalClp0InCells NncExtCounter64
  nncVcl1HourIntervalDiscardClp0And1InCells NncExtCounter64
  nncVcl1HourIntervalDiscardClp0InCells NncExtCounter64
  nncVcl1HourIntervalTaggedInCells NncExtCounter64
  nncVcl1HourIntervalClp0And1OutCells NncExtCounter64
  nncVcl1HourIntervalClp0OutCells NncExtCounter64

NncVclStatEntry  
SEQUENCE    
  nncVclStatClp0And1InCells NncExtCounter64
  nncVclStatClp0InCells NncExtCounter64
  nncVclStatDiscardClp0And1InCells NncExtCounter64
  nncVclStatDiscardClp0InCells NncExtCounter64
  nncVclStatTaggedInCells NncExtCounter64
  nncVclStatClp0And1OutCells NncExtCounter64
  nncVclStatClp0OutCells NncExtCounter64

NncAtmVplStatCounterEntry  
SEQUENCE    
  nncAtmVplStatCounterIndex INTEGER
  nncAtmVplStatCounterValue INTEGER

NncAtmVclStatCounterEntry  
SEQUENCE    
  nncAtmVclStatCounterIndex INTEGER
  nncAtmVclStatCounterValue INTEGER

NncVpa15MinCurrentEntry  
SEQUENCE    
  nncVpa15MinCurrentState NncExtIntvlStateType
  nncVpa15MinCurrentAbsoluteIntervalNumber Integer32
  nncVpa15MinCurrentClp0And1OutCells Counter64
  nncVpa15MinCurrentDiscardClp0And1Cells Counter64
  nncVpa15MinCurrentDiscardClp0Cells Counter64

NncVpa15MinIntervalEntry  
SEQUENCE    
  nncVpa15MinIntervalNumber Integer32
  nncVpa15MinIntervalState NncExtIntvlStateType
  nncVpa15MinIntervalAbsoluteIntervalNumber Integer32
  nncVpa15MinIntervalClp0And1OutCells Counter64
  nncVpa15MinIntervalDiscardClp0And1Cells Counter64
  nncVpa15MinIntervalDiscardClp0Cells Counter64

NncVpa1HourCurrentEntry  
SEQUENCE    
  nncVpa1HourCurrentState NncExtIntvlStateType
  nncVpa1HourCurrentAbsoluteIntervalNumber Integer32
  nncVpa1HourCurrentClp0And1OutCells Counter64
  nncVpa1HourCurrentDiscardClp0And1Cells Counter64
  nncVpa1HourCurrentDiscardClp0Cells Counter64

NncVpa1HourIntervalEntry  
SEQUENCE    
  nncVpa1HourIntervalNumber Integer32
  nncVpa1HourIntervalState NncExtIntvlStateType
  nncVpa1HourIntervalAbsoluteIntervalNumber Integer32
  nncVpa1HourIntervalClp0And1OutCells Counter64
  nncVpa1HourIntervalDiscardClp0And1Cells Counter64
  nncVpa1HourIntervalDiscardClp0Cells Counter64

Defined Values

nncAtmStatistics 1.3.6.1.4.1.123.3.29
This module contains definitions for performance monitoring of the ATM layer and it's circuits. This MIB module contains the following tables: ATM VPL 15 Minute Current Table ATM VPL 15 Minute Interval Table ATM VPL 1 Hour Current Table ATM VPL 1 Hour Interval Table ATM VPL Stat Table ATM VPL Stat Counter Table ATM VCL 15 Minute Current Table ATM VCL 15 Minute Interval Table ATM VCL 1 Hour Current Table ATM VCL 1 Hour Interval Table ATM VCL Stat Table ATM VCL Stat Counter Table nncDepthOfHistoricalStrata These tables are heavily influenced by the definition of VPL/VCL described in rfc1695, and by the statistic table definitions described for Sonet in rfc1595. The number of intervals supported is dependent upon resource availibility on any given product, but should nominally be 32. To avoid building in massive amounts of storage, some products may adopt a bulk collection scheme. Intervals: Statistics on the performance of VPL/VCLs are collected over a historical stratum of up to a maximum of M intervals. The value of M is a function of a product's storage capability. The intervals can be either 15 minutes or 1 hour and are aligned to the quarter or one hour, respectively, of a wall clock. The current interval spans back to the last 15 minute or 1 hour tick on the wall clock. Continuing along the timeline from that point is the most recently completed interval and has an index of 1. The previous interval has an index of 2 and so on. Note that the oldest interval may be incomplete since the statistic collection may have been enabled offset to the quarter or one hour tick. t 0 -1i -2i -3i ===========|===========|===========|===========|=========== current N = 1 N = 2 N = 3 N = 4 ... N = M interval Counters: The following is understood for each counter in this MIB: - OAM cells are included in counts - idle and unassigned cells are not counted - valid cells are those that have passed HEC and have assigned VPI/VCI - admitted cells have a connection This module also contains definitions for performance monitoring of Virtual Path Aggregation (VPA) - also known as VCC to VPC Traffic Aggregation - and implemented as Shaped Trunk Group. Only egress VPA statistics are provided. The following tables have been added : ATM VPA Short (15 minutes) Current Table ATM VPA Short (15 Minutes) Interval Table ATM VPA Long (1 Hour) Current Table ATM VPA Long (1 Hour) Interval Table Intervals: two 15-minute intervals are provided : current and previous two 1-hour intervals are provided : current and previous.
MODULE-IDENTITY    

nncAtmStatisticsObjects 1.3.6.1.4.1.123.3.29.1
OBJECT IDENTIFIER    

nncAtmStatisticsTraps 1.3.6.1.4.1.123.3.29.2
OBJECT IDENTIFIER    

nncAtmStatisticsGroups 1.3.6.1.4.1.123.3.29.3
OBJECT IDENTIFIER    

nncAtmStatisticsCompliances 1.3.6.1.4.1.123.3.29.4
OBJECT IDENTIFIER    

nncVpl15MinCurrentTable 1.3.6.1.4.1.123.3.29.1.1
The nncVpl15MinCurrentTable contains objects for monitoring the performance of a VPL during the current 15 minute interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVpl15MinCurrentEntry

nncVpl15MinCurrentEntry 1.3.6.1.4.1.123.3.29.1.1.1
An entry in the 15 minute current statistics table. Each conceptual row contains current statistics for a particular VPL.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVpl15MinCurrentEntry  

nncVpl15MinCurrentState 1.3.6.1.4.1.123.3.29.1.1.1.1
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVpl15MinCurrentAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.1.1.2
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtAbsIntvlNumberType  

nncVpl15MinCurrentClp0And1InCells 1.3.6.1.4.1.123.3.29.1.1.1.3
Number of valid cells admitted at ingress on the VPL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinCurrentClp0InCells 1.3.6.1.4.1.123.3.29.1.1.1.4
Number of valid cells admitted at ingress on the VPL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinCurrentDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.1.1.5
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinCurrentDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.1.1.6
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinCurrentTaggedInCells 1.3.6.1.4.1.123.3.29.1.1.1.7
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinCurrentClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.1.1.8
Number of valid cells transmitted at egress on the VPL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinCurrentClp0OutCells 1.3.6.1.4.1.123.3.29.1.1.1.9
Number of valid cells transmitted at egress on the VPL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinIntervalTable 1.3.6.1.4.1.123.3.29.1.2
The nncVpl15MinIntervalTable contains objects for monitoring the performance of a virtual path link over a historical stratum of M 15 minute intervals.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVpl15MinIntervalEntry

nncVpl15MinIntervalEntry 1.3.6.1.4.1.123.3.29.1.2.1
An entry in the 15 minute interval statistics table. Each conceptual row contains statistics for a particular VPL and interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVpl15MinIntervalEntry  

nncVpl15MinIntervalNumber 1.3.6.1.4.1.123.3.29.1.2.1.1
The interval number (N) of the statistics in this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncExtRelIntvlNumberType  

nncVpl15MinIntervalState 1.3.6.1.4.1.123.3.29.1.2.1.2
The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVpl15MinIntervalAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.2.1.3
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtAbsIntvlNumberType  

nncVpl15MinIntervalClp0And1InCells 1.3.6.1.4.1.123.3.29.1.2.1.4
Number of valid cells admitted at ingress on the VPL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinIntervalClp0InCells 1.3.6.1.4.1.123.3.29.1.2.1.5
Number of valid cells admitted at ingress on the VPL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinIntervalDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.2.1.6
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinIntervalDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.2.1.7
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinIntervalTaggedInCells 1.3.6.1.4.1.123.3.29.1.2.1.8
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinIntervalClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.2.1.9
Number of valid cells transmitted at egress on the VPL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl15MinIntervalClp0OutCells 1.3.6.1.4.1.123.3.29.1.2.1.10
Number of valid cells transmitted at egress on the VPL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourCurrentTable 1.3.6.1.4.1.123.3.29.1.3
The nncVpl1HourCurrentTable contains objects for monitoring the performance of a VPL during the current 1 hour interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVpl1HourCurrentEntry

nncVpl1HourCurrentEntry 1.3.6.1.4.1.123.3.29.1.3.1
An entry in the 1 hour current statistics table. Each conceptual row contains current statistics for a particular VPL. By default, 1 Hour statistics are not gathered. In order to enable gathering of these statistics, a row must be created. The semantics of nncVpl1HourCurrentRowStatus is the same as the definition of RowStatus in rfc1443 with the following constraints. 1. Creation is done in one step, that is, by setting the nncVpl1HourCurrentRowStatus column to createAndGo. Setting the column to createAndWait will return wrongValue. 2. The VPI specified in the instance must be an endpoint that is currently used in a VPL otherwise the agent will return return inconsistentValue and no row is created. 3. If the maximum number of rows (an agent limitation) has been reached, resourceUnavailable is returned and no row is created. 4. Creation of a current row will also enable the corresponding interval table whose rows will be created when intervals are completed. 5. Statistics collection is disabled by setting the column to destroy. This will also remove all corresponding rows in the interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVpl1HourCurrentEntry  

nncVpl1HourCurrentState 1.3.6.1.4.1.123.3.29.1.3.1.1
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVpl1HourCurrentAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.3.1.2
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtAbsIntvlNumberType  

nncVpl1HourCurrentClp0And1InCells 1.3.6.1.4.1.123.3.29.1.3.1.3
Number of valid cells admitted at ingress on the VPL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourCurrentClp0InCells 1.3.6.1.4.1.123.3.29.1.3.1.4
Number of valid cells admitted at ingress on the VPL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourCurrentDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.3.1.5
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourCurrentDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.3.1.6
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourCurrentTaggedInCells 1.3.6.1.4.1.123.3.29.1.3.1.7
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourCurrentClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.3.1.8
Number of valid cells transmitted at egress on the VPL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourCurrentClp0OutCells 1.3.6.1.4.1.123.3.29.1.3.1.9
Number of valid cells transmitted at egress on the VPL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourCurrentRowStatus 1.3.6.1.4.1.123.3.29.1.3.1.10
This object is used to create and delete rows in this table. The following sets are invalid: createAndWait, active, and notInService. Such sets will return wrongValue.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

nncVpl1HourIntervalTable 1.3.6.1.4.1.123.3.29.1.4
The nncVpl1HourIntervalTable contains objects for monitoring the performance of a virtual path link over a historical stratum of M 1 hour intervals.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVpl1HourIntervalEntry

nncVpl1HourIntervalEntry 1.3.6.1.4.1.123.3.29.1.4.1
An entry in the 1 hour interval statistics table. Each conceptual row contains statistics for a particular VPL and interval. These rows are automatically created if there is a corresponding entry in the 1 hour current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVpl1HourIntervalEntry  

nncVpl1HourIntervalNumber 1.3.6.1.4.1.123.3.29.1.4.1.1
The interval number (N) of the statistics in this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncExtRelIntvlNumberType  

nncVpl1HourIntervalState 1.3.6.1.4.1.123.3.29.1.4.1.2
The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVpl1HourIntervalAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.4.1.3
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtAbsIntvlNumberType  

nncVpl1HourIntervalClp0And1InCells 1.3.6.1.4.1.123.3.29.1.4.1.4
Number of valid cells admitted at ingress on the VPL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourIntervalClp0InCells 1.3.6.1.4.1.123.3.29.1.4.1.5
Number of valid cells admitted at ingress on the VPL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourIntervalDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.4.1.6
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourIntervalDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.4.1.7
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourIntervalTaggedInCells 1.3.6.1.4.1.123.3.29.1.4.1.8
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourIntervalClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.4.1.9
Number of valid cells transmitted at egress on the VPL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVpl1HourIntervalClp0OutCells 1.3.6.1.4.1.123.3.29.1.4.1.10
Number of valid cells transmitted at egress on the VPL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVplStatTable 1.3.6.1.4.1.123.3.29.1.10
The nncVplStatTable contains objects for monitoring the accumulated performance of a VPL since measurement started on the VPL.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVplStatEntry

nncVplStatEntry 1.3.6.1.4.1.123.3.29.1.10.1
An entry in the Vpl Stat table. Each conceptual row contains accumulated statistics for a particular VPL.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVplStatEntry  

nncVplStatClp0And1InCells 1.3.6.1.4.1.123.3.29.1.10.1.1
Number of valid cells admitted at ingress on the VPL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVplStatClp0InCells 1.3.6.1.4.1.123.3.29.1.10.1.2
Number of valid cells admitted at ingress on the VPL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVplStatDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.10.1.3
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVplStatDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.10.1.4
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVplStatTaggedInCells 1.3.6.1.4.1.123.3.29.1.10.1.5
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVplStatClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.10.1.6
Number of valid cells transmitted at egress on the VPL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVplStatClp0OutCells 1.3.6.1.4.1.123.3.29.1.10.1.7
Number of valid cells transmitted at egress on the VPL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinCurrentTable 1.3.6.1.4.1.123.3.29.1.5
The nncVcl15MinCurrentTable contains objects for monitoring the performance of a VCL during the current 15 minute interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVcl15MinCurrentEntry

nncVcl15MinCurrentEntry 1.3.6.1.4.1.123.3.29.1.5.1
An entry in the 15 minute current statistics table. Each conceptual row contains current statistics for a particular VCL.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVcl15MinCurrentEntry  

nncVcl15MinCurrentState 1.3.6.1.4.1.123.3.29.1.5.1.1
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVcl15MinCurrentAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.5.1.2
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtAbsIntvlNumberType  

nncVcl15MinCurrentClp0And1InCells 1.3.6.1.4.1.123.3.29.1.5.1.3
Number of valid cells admitted at ingress on the VCL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinCurrentClp0InCells 1.3.6.1.4.1.123.3.29.1.5.1.4
Number of valid cells admitted at ingress on the VCL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinCurrentDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.5.1.5
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinCurrentDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.5.1.6
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinCurrentTaggedInCells 1.3.6.1.4.1.123.3.29.1.5.1.7
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinCurrentClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.5.1.8
Number of valid cells transmitted at egress on the VCL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinCurrentClp0OutCells 1.3.6.1.4.1.123.3.29.1.5.1.9
Number of valid cells transmitted at egress on the VCL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinIntervalTable 1.3.6.1.4.1.123.3.29.1.6
The nncVcl15MinIntervalTable contains objects for monitoring the performance of a virtual channel link over a historical stratum of M 15 minute intervals.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVcl15MinIntervalEntry

nncVcl15MinIntervalEntry 1.3.6.1.4.1.123.3.29.1.6.1
An entry in the 15 minute interval statistics table. Each conceptual row contains statistics for a particular VCL and interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVcl15MinIntervalEntry  

nncVcl15MinIntervalNumber 1.3.6.1.4.1.123.3.29.1.6.1.1
The interval number (N) of the statistics in this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncExtRelIntvlNumberType  

nncVcl15MinIntervalState 1.3.6.1.4.1.123.3.29.1.6.1.2
The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVcl15MinIntervalAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.6.1.3
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtAbsIntvlNumberType  

nncVcl15MinIntervalClp0And1InCells 1.3.6.1.4.1.123.3.29.1.6.1.4
Number of valid cells admitted at ingress on the VCL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinIntervalClp0InCells 1.3.6.1.4.1.123.3.29.1.6.1.5
Number of valid cells admitted at ingress on the VCL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinIntervalDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.6.1.6
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinIntervalDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.6.1.7
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinIntervalTaggedInCells 1.3.6.1.4.1.123.3.29.1.6.1.8
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinIntervalClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.6.1.9
Number of valid cells transmitted at egress on the VCL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl15MinIntervalClp0OutCells 1.3.6.1.4.1.123.3.29.1.6.1.10
Number of valid cells transmitted at egress on the VCL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourCurrentTable 1.3.6.1.4.1.123.3.29.1.7
The nncVcl1HourCurrentTable contains objects for monitoring the performance of a VCL during the current 1 hour interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVcl1HourCurrentEntry

nncVcl1HourCurrentEntry 1.3.6.1.4.1.123.3.29.1.7.1
An entry in the 1 hour current statistics table. Each conceptual row contains current statistics for a particular VCL. By default, 1 Hour statistics are not gathered. In order to enable gathering of these statistics, a row must be created. The semantics of nncVcl1HourCurrentRowStatus is the same as the definition of RowStatus in rfc1443 with the following constraints. 1. Creation is done in one step, that is, by setting the nncVcl1HourCurrentRowStatus column to createAndGo. Setting the column to createAndWait will return wrongValue. 2. The VCI specified in the instance must be an endpoint that is currently used in a VCL otherwise the agent will return return inconsistentValue and no row is created. 3. If the maximum number of rows (an agent limitation) has been reached, resourceUnavailable is returned and no row is created. 4. Creation of a current row will also enable the corresponding interval table whose rows will be created when intervals are completed. 5. Statistics collection is disabled by setting the column to destroy. This will also remove all corresponding rows in the interval table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVcl1HourCurrentEntry  

nncVcl1HourCurrentState 1.3.6.1.4.1.123.3.29.1.7.1.1
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVcl1HourCurrentAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.7.1.2
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtAbsIntvlNumberType  

nncVcl1HourCurrentClp0And1InCells 1.3.6.1.4.1.123.3.29.1.7.1.3
Number of valid cells admitted at ingress on the VCL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourCurrentClp0InCells 1.3.6.1.4.1.123.3.29.1.7.1.4
Number of valid cells admitted at ingress on the VCL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourCurrentDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.7.1.5
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourCurrentDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.7.1.6
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourCurrentTaggedInCells 1.3.6.1.4.1.123.3.29.1.7.1.7
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourCurrentClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.7.1.8
Number of valid cells transmitted at egress on the VCL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourCurrentClp0OutCells 1.3.6.1.4.1.123.3.29.1.7.1.9
Number of valid cells transmitted at egress on the VCL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourCurrentRowStatus 1.3.6.1.4.1.123.3.29.1.7.1.10
This object is used to create and delete rows in this table. The following sets are invalid: createAndWait, active, and notInService. Such sets will return wrongValue.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

nncVcl1HourIntervalTable 1.3.6.1.4.1.123.3.29.1.8
The nncVcl1HourIntervalTable contains objects for monitoring the performance of a virtual Channel link over a historical stratum of M 1 hour intervals.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVcl1HourIntervalEntry

nncVcl1HourIntervalEntry 1.3.6.1.4.1.123.3.29.1.8.1
An entry in the 1 hour interval statistics table. Each conceptual row contains statistics for a particular VCL and interval. These rows are automatically created if there is a corresponding entry in the 1 hour current table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVcl1HourIntervalEntry  

nncVcl1HourIntervalNumber 1.3.6.1.4.1.123.3.29.1.8.1.1
The interval number (N) of the statistics in this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncExtRelIntvlNumberType  

nncVcl1HourIntervalState 1.3.6.1.4.1.123.3.29.1.8.1.2
The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVcl1HourIntervalAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.8.1.3
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtAbsIntvlNumberType  

nncVcl1HourIntervalClp0And1InCells 1.3.6.1.4.1.123.3.29.1.8.1.4
Number of valid cells admitted at ingress on the VCL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourIntervalClp0InCells 1.3.6.1.4.1.123.3.29.1.8.1.5
Number of valid cells admitted at ingress on the VCL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourIntervalDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.8.1.6
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourIntervalDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.8.1.7
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourIntervalTaggedInCells 1.3.6.1.4.1.123.3.29.1.8.1.8
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourIntervalClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.8.1.9
Number of valid cells transmitted at egress on the VCL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVcl1HourIntervalClp0OutCells 1.3.6.1.4.1.123.3.29.1.8.1.10
Number of valid cells transmitted at egress on the VCL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVclStatTable 1.3.6.1.4.1.123.3.29.1.11
The nncVclStatTable contains objects for monitoring the accumulated performance of a VCL since measurement started on the VCL.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVclStatEntry

nncVclStatEntry 1.3.6.1.4.1.123.3.29.1.11.1
An entry in the Stat table. Each conceptual row contains accumulated statistics for a particular VCL.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVclStatEntry  

nncVclStatClp0And1InCells 1.3.6.1.4.1.123.3.29.1.11.1.1
Number of valid cells admitted at ingress on the VCL with CLP=0 or 1, including those with header errors corrected. This counter is formed after the UPC function.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVclStatClp0InCells 1.3.6.1.4.1.123.3.29.1.11.1.2
Number of valid cells admitted at ingress on the VCL with CLP=0, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVclStatDiscardClp0And1InCells 1.3.6.1.4.1.123.3.29.1.11.1.3
Number of valid cells with CLP=1 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVclStatDiscardClp0InCells 1.3.6.1.4.1.123.3.29.1.11.1.4
Number of valid cells with CLP=0 discarded at ingress by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVclStatTaggedInCells 1.3.6.1.4.1.123.3.29.1.11.1.5
Number of valid cells admitted at ingress with CLP=0, with CLP set to 1 by ingress traffic policing, including those with header errors corrected.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVclStatClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.11.1.6
Number of valid cells transmitted at egress on the VPL with CLP=0 or 1.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncVclStatClp0OutCells 1.3.6.1.4.1.123.3.29.1.11.1.7
Number of valid cells transmitted at egress on the VPL with CLP=0.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtCounter64  

nncAtmVplStatCounterTable 1.3.6.1.4.1.123.3.29.1.12
This table supplies the maximum interval numbers for valid data for Atm Vpl End Points in the nncVpl15MinIntervalTable and nncVpl1HourIntervaltable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncAtmVplStatCounterEntry

nncAtmVplStatCounterEntry 1.3.6.1.4.1.123.3.29.1.12.1
An Entry in nncAtmVplStatCounterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncAtmVplStatCounterEntry  

nncAtmVplStatCounterIndex 1.3.6.1.4.1.123.3.29.1.12.1.1
This index specifies the type of interval available. 1 = hourly 2 = daily (not used) 3 = monthly (not used) 4 = 15 minute interval stats.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER hourly(1), daily(2), monthly(3), interval(4)  

nncAtmVplStatCounterValue 1.3.6.1.4.1.123.3.29.1.12.1.2
This values represents the maximum interval number for valid data for Atm Vpl End Points. This number is based on the type of interval being reported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7fffffff  

nncAtmVclStatCounterTable 1.3.6.1.4.1.123.3.29.1.13
This table supplies the maximum interval numbers for valid data for Atm Vcl End Points in the nncVcl15MinIntervalTable and nncVcl1HourIntervaltable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncAtmVclStatCounterEntry

nncAtmVclStatCounterEntry 1.3.6.1.4.1.123.3.29.1.13.1
An Entry in nncAtmVclStatCounterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NncAtmVclStatCounterEntry  

nncAtmVclStatCounterIndex 1.3.6.1.4.1.123.3.29.1.13.1.1
This index specifies the type of interval available. 1 = hourly 2 = daily (not used) 3 = monthly (not used) 4 = 15 minute interval stats.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER hourly(1), daily(2), monthly(3), interval(4)  

nncAtmVclStatCounterValue 1.3.6.1.4.1.123.3.29.1.13.1.2
This values represents the maximum interval number for valid data for Atm Vcl End Points. This number is based on the type of interval being reported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7fffffff  

nncVpa15MinCurrentTable 1.3.6.1.4.1.123.3.29.1.15
The nncVpa15MinCurrentTable contains objects for monitoring the performance of a VPA during the current 15 minute interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVpa15MinCurrentEntry

nncVpa15MinCurrentEntry 1.3.6.1.4.1.123.3.29.1.15.1
An entry in the 15 minute current statistics table. Each conceptual row contains current statistics for a particular VPA
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVpa15MinCurrentEntry  

nncVpa15MinCurrentState 1.3.6.1.4.1.123.3.29.1.15.1.1
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVpa15MinCurrentAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.15.1.2
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nncVpa15MinCurrentClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.15.1.3
Total CLP0 and CLP1 cells transmitted on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa15MinCurrentDiscardClp0And1Cells 1.3.6.1.4.1.123.3.29.1.15.1.4
Total CLP0 and CLP1 cells discarded due to congestion on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa15MinCurrentDiscardClp0Cells 1.3.6.1.4.1.123.3.29.1.15.1.6
Total CLP0 cells discarded due to congestion on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa15MinIntervalTable 1.3.6.1.4.1.123.3.29.1.16
The nncVpa15MinIntervalTable contains objects for monitoring the performance of a VPA during the 15 minute interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVpa15MinIntervalEntry

nncVpa15MinIntervalEntry 1.3.6.1.4.1.123.3.29.1.16.1
An entry in the 15 minute current statistics table. Each conceptual row contains current statistics for a particular VPA
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVpa15MinIntervalEntry  

nncVpa15MinIntervalNumber 1.3.6.1.4.1.123.3.29.1.16.1.1
The interval number (N) of the statistics in this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

nncVpa15MinIntervalState 1.3.6.1.4.1.123.3.29.1.16.1.2
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVpa15MinIntervalAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.16.1.3
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nncVpa15MinIntervalClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.16.1.4
Total CLP0 and CLP1 cells transmitted on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa15MinIntervalDiscardClp0And1Cells 1.3.6.1.4.1.123.3.29.1.16.1.5
Total CLP0 and CLP1 cells discarded due to congestion on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa15MinIntervalDiscardClp0Cells 1.3.6.1.4.1.123.3.29.1.16.1.6
Total CLP0 cells discarded due to congestion on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa1HourCurrentTable 1.3.6.1.4.1.123.3.29.1.17
The nncVpa1HourCurrentTable contains objects for monitoring the performance of a VPA during the current 1 hour interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVpa1HourCurrentEntry

nncVpa1HourCurrentEntry 1.3.6.1.4.1.123.3.29.1.17.1
An entry in the 1 hour current statistics table. Each conceptual row contains current statistics for a particular VPA
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVpa1HourCurrentEntry  

nncVpa1HourCurrentState 1.3.6.1.4.1.123.3.29.1.17.1.1
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVpa1HourCurrentAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.17.1.2
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nncVpa1HourCurrentClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.17.1.3
Total CLP0 and CLP1 cells transmitted on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa1HourCurrentDiscardClp0And1Cells 1.3.6.1.4.1.123.3.29.1.17.1.4
Total CLP0 and CLP1 cells discarded due to congestion on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa1HourCurrentDiscardClp0Cells 1.3.6.1.4.1.123.3.29.1.17.1.5
Total CLP0 cells discarded due to congestion on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa1HourIntervalTable 1.3.6.1.4.1.123.3.29.1.18
The nncVpa1HourIntervalTable contains objects for monitoring the performance of a VPA during the 1 hour interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NncVpa1HourIntervalEntry

nncVpa1HourIntervalEntry 1.3.6.1.4.1.123.3.29.1.18.1
An entry in the 1hour current statistics table. Each conceptual row contains current statistics for a particular VPA
Status: current Access: not-accessible
OBJECT-TYPE    
  NncVpa1HourIntervalEntry  

nncVpa1HourIntervalNumber 1.3.6.1.4.1.123.3.29.1.18.1.1
The interval number (N) of the statistics in this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

nncVpa1HourIntervalState 1.3.6.1.4.1.123.3.29.1.18.1.2
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtIntvlStateType  

nncVpa1HourIntervalAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.29.1.18.1.3
The absolute interval number of this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nncVpa1HourIntervalClp0And1OutCells 1.3.6.1.4.1.123.3.29.1.18.1.4
Total CLP0 and CLP1 cells transmitted on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa1HourIntervalDiscardClp0And1Cells 1.3.6.1.4.1.123.3.29.1.18.1.5
Total CLP0 and CLP1 cells discarded due to congestion on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncVpa1HourIntervalDiscardClp0Cells 1.3.6.1.4.1.123.3.29.1.18.1.6
Total CLP0 cells discarded due to congestion on all constituent VCs of a particular VPA
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

nncDepthOf15MinHistoricalStrata 1.3.6.1.4.1.123.3.29.1.9
The depth of the historical strata of 15min interval tables in this module.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtRelIntvlNumberType  

nncDepthOf1HourHistoricalStrata 1.3.6.1.4.1.123.3.29.1.14
The depth of the historical strata of 1 hour interval tables in this module.
Status: current Access: read-only
OBJECT-TYPE    
  NncExtRelIntvlNumberType  

nncVpl15MinCurrentGroup 1.3.6.1.4.1.123.3.29.3.1
A collection of objects providing 15 Min current statistics for a VPI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVpl15MinIntervalGroup 1.3.6.1.4.1.123.3.29.3.2
A collection of objects providing 15 Min interval statistics for a VPI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVpl1HourCurrentGroup 1.3.6.1.4.1.123.3.29.3.3
A collection of objects providing 1 Hour current statistics for a VPI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVpl1HourIntervalGroup 1.3.6.1.4.1.123.3.29.3.4
A collection of objects providing 1 Hour interval statistics for a VPI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVplStatGroup 1.3.6.1.4.1.123.3.29.3.9
A collection of objects providing cumulative statistics for a VPI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVcl15MinCurrentGroup 1.3.6.1.4.1.123.3.29.3.5
A collection of objects providing 15 Min current statistics for a VCI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVcl15MinIntervalGroup 1.3.6.1.4.1.123.3.29.3.6
A collection of objects providing 15 Min interval statistics for a VCI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVcl1HourCurrentGroup 1.3.6.1.4.1.123.3.29.3.7
A collection of objects providing 1 Hour current statistics for a VCI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVcl1HourIntervalGroup 1.3.6.1.4.1.123.3.29.3.8
A collection of objects providing 1 Hour interval statistics for a VCI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVclStatGroup 1.3.6.1.4.1.123.3.29.3.10
A collection of objects providing cumulative statistics for a VCI endpoint
Status: current Access: read-only
OBJECT-GROUP    

nncVplIntervalStateGroup 1.3.6.1.4.1.123.3.29.3.11
A collection of objects providing the state of intervals in the VPL current and interval tables.
Status: current Access: read-only
OBJECT-GROUP    

nncVclIntervalStateGroup 1.3.6.1.4.1.123.3.29.3.12
A collection of objects providing the state of intervals in the VCL current and interval tables.
Status: current Access: read-only
OBJECT-GROUP    

nncVplStatCounterGroup 1.3.6.1.4.1.123.3.29.3.13
A collection of objects providing the count of valid intervals in the VPL interval tables.
Status: current Access: read-only
OBJECT-GROUP    

nncVclStatCounterGroup 1.3.6.1.4.1.123.3.29.3.14
A collection of objects providing the count of valid intervals in the VCL interval tables.
Status: current Access: read-only
OBJECT-GROUP    

nncDepthOfHistoricalStrataGroup 1.3.6.1.4.1.123.3.29.3.15
A collection of objects providing the number of intervals supported in the interval tables.
Status: current Access: read-only
OBJECT-GROUP    

nncVpa15MinCurrentGroup 1.3.6.1.4.1.123.3.29.3.16
A collection of objects providing 15 Min current statistics for a VP Aggregation
Status: current Access: read-only
OBJECT-GROUP    

nncVpa15MinIntervalGroup 1.3.6.1.4.1.123.3.29.3.17
A collection of objects providing 15 Min interval statistics for a VP Aggregation
Status: current Access: read-only
OBJECT-GROUP    

nncVpa1HourCurrentGroup 1.3.6.1.4.1.123.3.29.3.18
A collection of objects providing 1 hour current statistics for a VP Aggregation
Status: current Access: read-only
OBJECT-GROUP    

nncVpa1HourIntervalGroup 1.3.6.1.4.1.123.3.29.3.19
A collection of objects providing 1 hour interval statistics for a VP Aggregation
Status: current Access: read-only
OBJECT-GROUP    

nncAtmStatisticsCompliance 1.3.6.1.4.1.123.3.29.4.1
The compliance statement for Newbridge SNMP entities which have Vpl/Vcl endpoints and VPA
Status: current Access: read-only
MODULE-COMPLIANCE    

nncAtmStatisticsServiceCompliance 1.3.6.1.4.1.123.3.29.4.2
The compliance statement for Newbridge SNMP Service-level entities which report on Vpl/Vcl endpoints
Status: current Access: read-only
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor