NMS-EPON-ONU-PARAM
File:
NMS-EPON-ONU-PARAM.mib (12735 bytes)
Imported modules
Imported symbols
Defined Types
OnuPerformParameterAlarmsSetEntry |
|
SEQUENCE |
|
|
|
|
llidIfIndex |
INTEGER |
|
|
cpuUsageHighLimitEnable |
INTEGER |
|
|
cpuUsageHighLimitThreshold |
INTEGER |
|
|
cpuUsageHighLimitClearThreshold |
INTEGER |
|
|
cpuUsageHighLimitRowStatus |
RowStatus |
|
|
ramUsageHighLimitEnable |
INTEGER |
|
|
ramUsageHighLimitThreshold |
INTEGER |
|
|
ramUsageHighLimitClearThreshold |
INTEGER |
|
|
ramUsageHighLimitRowStatus |
RowStatus |
|
|
temperatureAlarmUpLimitEnable |
INTEGER |
|
|
temperatureAlarmUpLimitThreshold |
INTEGER |
|
|
temperatureAlarmUpLimitClearThreshold |
INTEGER |
|
|
temperatureAlarmUpLimitRowStatus |
RowStatus |
|
|
temperatureAlarmLowLimitEnable |
INTEGER |
|
|
temperatureAlarmLowLimitThreshold |
INTEGER |
|
|
temperatureAlarmLowLimitClearThreshold |
INTEGER |
|
|
temperatureAlarmLowLimitRowStatus |
RowStatus |
|
|
voltageAlarmUpLimitEnable |
INTEGER |
|
|
voltageAlarmUpLimitThreshold |
INTEGER |
|
|
voltageAlarmUpLimitClearThreshold |
INTEGER |
|
|
voltageAlarmUpLimitRowStatus |
RowStatus |
|
|
voltageAlarmLowLimitEnable |
INTEGER |
|
|
voltageAlarmLowLimitThreshold |
INTEGER |
|
|
voltageAlarmLowLimitClearThreshold |
INTEGER |
|
|
voltageAlarmLowLimitRowStatus |
RowStatus |
|
Defined Values
nmsOnuPerf |
1.3.6.1.4.1.3320.101.201 |
OBJECT IDENTIFIER |
|
|
|
llidIfIndex |
1.3.6.1.4.1.3320.101.201.1.1.1.1 |
Index of LLID interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
cpuUsageHighLimitEnable |
1.3.6.1.4.1.3320.101.201.1.1.1.2 |
Enable or disable the alarm of CPU usage. 1-enable, 2-disable. Default is disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
cpuUsageHighLimitThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.3 |
The upper threshold of CPU usage alarm. The unit is 1%. The range is 1-100. Default is 100. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..100 |
|
cpuUsageHighLimitClearThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.4 |
The upper threshold of CPU usage alarm cleared. The range is 1-100. Default is 100. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..100 |
|
ramUsageHighLimitEnable |
1.3.6.1.4.1.3320.101.201.1.1.1.6 |
Enable or disable the alarm of RAM usage. 1-enable, 2-disable. Default is disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
ramUsageHighLimitThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.7 |
The upper threshold of RAM usage alarm. The unit is 1%. The range is 1-100. Default is 100. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..100 |
|
ramUsageHighLimitClearThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.8 |
The upper threshold of RAM usage alarm cleared. The range is 1-100. Default is 100. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..100 |
|
temperatureAlarmUpLimitEnable |
1.3.6.1.4.1.3320.101.201.1.1.1.10 |
Enable or disable the alarm of PON high temperature. 1-enable, 2-disable. Default is disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
temperatureAlarmUpLimitThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.11 |
The upper threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is 1280. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-1280..1280 |
|
temperatureAlarmUpLimitClearThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.12 |
The upper threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is 1280. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-1280..1280 |
|
temperatureAlarmLowLimitEnable |
1.3.6.1.4.1.3320.101.201.1.1.1.14 |
Enable or disable the alarm of PON low temperature. 1-enable, 2-disable. Default is disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
temperatureAlarmLowLimitThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.15 |
The low threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is -1280. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-1280..1280 |
|
temperatureAlarmLowLimitClearThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.16 |
The low threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is -1280. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-1280..1280 |
|
voltageAlarmUpLimitEnable |
1.3.6.1.4.1.3320.101.201.1.1.1.18 |
Enable or disable the alarm of PON high voltage. 1-enable, 2-disable. Default is disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
voltageAlarmUpLimitThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.19 |
The upper threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 65. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65 |
|
voltageAlarmUpLimitClearThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.20 |
The upper threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 65. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65 |
|
voltageAlarmLowLimitEnable |
1.3.6.1.4.1.3320.101.201.1.1.1.22 |
Enable or disable the alarm of PON low voltage. 1-enable, 2-disable. Default is disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
voltageAlarmLowLimitThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.23 |
The low threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 0. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65 |
|
voltageAlarmLowLimitClearThreshold |
1.3.6.1.4.1.3320.101.201.1.1.1.24 |
The low threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 0. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65 |
|
ifIndex |
1.3.6.1.4.1.3320.101.201.1.2.1.1 |
Index of LLID interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
cpuUsage |
1.3.6.1.4.1.3320.101.201.1.2.1.2 |
CPU usage . The unit is 1%. The range is 1-100. Default is 0. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..100 |
|
ramUsage |
1.3.6.1.4.1.3320.101.201.1.2.1.3 |
RAM usage. The unit is 1%. The range is 1-100. Default is 0. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..100 |
|
temperature |
1.3.6.1.4.1.3320.101.201.1.2.1.4 |
Temperature.The unit is 0.1 degree. The range is -1280-1280. Default is 0. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-1280..1280 |
|
voltage |
1.3.6.1.4.1.3320.101.201.1.2.1.5 |
Voltage.The unit is 0.1V. The range is 0-65. Default is 0. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65 |
|
paraStatus |
1.3.6.1.4.1.3320.101.18.8.1 |
Description. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
above(1), below(2), normal(3) |
|
nmsOnuPerfNotifV2 |
1.3.6.1.4.1.3320.101.18.8.2 |
Root node for the converted TRAP-TYPEs. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|