NETGEAR-DOT1X-ADVANCED-FEATURES-MIB

File: NETGEAR-DOT1X-ADVANCED-FEATURES-MIB.mib (4568 bytes)

Imported modules

SNMPv2-SMI IEEE8021-PAE-MIB SNMPv2-TC
BROADCOM-REF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 dot1xPaePortNumber RowStatus
ng700smartswitch

Defined Types

AgentDot1xGuestVlanPortConfigEntry  
SEQUENCE    
  agentDot1xGuestVlanId Unsigned32
  agentDot1xGuestVlanPeriod Unsigned32

Defined Values

agentdot1xAdvanced 1.3.6.1.4.1.4526.11.36
The Netgear Private MIB for Dot1x Advanced Features
MODULE-IDENTITY    

agentGuestVlanConfigGroup 1.3.6.1.4.1.4526.11.36.1
OBJECT IDENTIFIER    

agentGuestVlanSupplMode 1.3.6.1.4.1.4526.11.36.1.1
Mode showing whether at the global level,Guest VLAN Supplicant Mode is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDot1xGuestVlanPortConfigTable 1.3.6.1.4.1.4526.11.36.1.2
A table for Guest Vlan and associated functionality.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDot1xGuestVlanPortConfigEntry

agentDot1xGuestVlanPortConfigEntry 1.3.6.1.4.1.4526.11.36.1.2.1
Represents entry for guest config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDot1xGuestVlanPortConfigEntry  

agentDot1xGuestVlanId 1.3.6.1.4.1.4526.11.36.1.2.1.1
Specifies the Guest Vlan of the interface. An interface will be moved to its Guest Vlan if its access is unsucessfully authenticated. A value of zero indicates no Guest Vlan configured for the interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentDot1xGuestVlanPeriod 1.3.6.1.4.1.4526.11.36.1.2.1.2
The value, in seconds, of the guestVlanPeriod constant currently in use for Guest Vlan Assignment for the interface .
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

agentDot1xEnhancementConfigGroup 1.3.6.1.4.1.4526.11.36.2
OBJECT IDENTIFIER    

agentDot1xRadiusVlanAssignment 1.3.6.1.4.1.4526.11.36.2.1
Enable/Disable dot1x Vlan Assignment Support on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)