NBS-TUNABLE-MIB
File:
NBS-TUNABLE-MIB.mib (6078 bytes)
Imported modules
Imported symbols
Defined Types
NbsTunableChannelEntry |
|
SEQUENCE |
|
|
|
|
nbsTunableChannelIfIndex |
InterfaceIndex |
|
|
nbsTunableChannelFreqStart |
INTEGER |
|
|
nbsTunableChannelFreqEnd |
INTEGER |
|
|
nbsTunableChannelFreqStep |
INTEGER |
|
|
nbsTunableChannelFreqExponent |
INTEGER |
|
|
nbsTunableChannelFreqAdmin |
INTEGER |
|
|
nbsTunableChannelFreqOper |
INTEGER |
|
|
nbsTunableChannelFreqDefault |
INTEGER |
|
Defined Values
nbsTunableMib |
1.3.6.1.4.1.629.203 |
MIB for representing Tunable Optics parameters |
MODULE-IDENTITY |
|
|
|
nbsTunableGrp |
1.3.6.1.4.1.629.203.1 |
MIB for representing Tunable Optics parameters |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
nbsTunableChannelEntry |
1.3.6.1.4.1.629.203.1.2.1 |
Describes a setting for an interface's tunable optics. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NbsTunableChannelEntry |
|
|
nbsTunableChannelFreqStart |
1.3.6.1.4.1.629.203.1.2.1.2 |
The first allowable frequency for this tunable optic, in
GigaHertz (GHz), unless FreqExponent != 9.
For L-Band, ITU Grid 48 is '184800'
For Q-Band, ITU Grid 48 is '184850'
For C-Band, ITU Grid 1 is '190100'
For H-Band, ITU Grid 1 is '190150'
If GHz does not provide the appropriate resolution, the
tunable optic may report a FreqExponent less than 9.
If 32 bits is insufficient to cover the range in GHz, the
tunable optic may report a FreqExponent greater than 9. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
nbsTunableChannelFreqEnd |
1.3.6.1.4.1.629.203.1.2.1.3 |
The last allowable frequency (inclusive) for this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9.
For L-Band, ITU Grid 99 is '189900'
For Q-Band, ITU Grid 99 is '189950'
For C-Band, ITU Grid 72 is '197200'
For H-Band, ITU Grid 72 is '197250'
If GHz does not provide the appropriate resolution, the
tunable optic may report a FreqExponent less than 9.
If 32 bits is insufficient to cover the range in GHz, the
tunable optic may report a FreqExponent greater than 9. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
nbsTunableChannelFreqStep |
1.3.6.1.4.1.629.203.1.2.1.4 |
The spacing of the allowable frequencies that this tunable
optic supports, in GigaHertz (GHz), unless FreqExponent != 9.
100 indicates the standard ITU grid spacing of 100GHz.
For example, if this tunable optic supports both C and H
band, or both Q and L band, FreqStep should report 50.
If this tunable optic supports steps finer than 1GHz,
the tunable optic may report a FreqExponent less than 9. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
nbsTunableChannelFreqExponent |
1.3.6.1.4.1.629.203.1.2.1.5 |
The exponent of all the Freq values (including FreqStep). 9
(the default) indicates all units are in GigaHertz (GHz). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
nbsTunableChannelFreqAdmin |
1.3.6.1.4.1.629.203.1.2.1.6 |
The administratively desired frequency of this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
nbsTunableChannelFreqOper |
1.3.6.1.4.1.629.203.1.2.1.7 |
The current operational frequency of this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
nbsTunableChannelFreqDefault |
1.3.6.1.4.1.629.203.1.2.1.8 |
The default frequency of this tunable optic, in GigaHertz
(GHz), unless FreqExponent != 9. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|