MPIOS-MIB

File: MPIOS-MIB.mib (83882 bytes)

Imported modules

SNMPv2-TC RFC1155-SMI MAIPU-SMI
SNMPv2-SMI

Imported symbols

DisplayString TruthValue RowStatus
TEXTUAL-CONVENTION Counter mpMgmt
Counter64 Counter32 IpAddress
MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32

Defined Types

EnabledStatus  
A simple status value for the object.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

TaskEntry  
SEQUENCE    
  taskId Unsigned32
  taskName DisplayString
  taskPriority Integer32
  taskStatus INTEGER
  taskOptions Integer32
  taskMain DisplayString
  taskStackPtr Unsigned32
  taskStackBase Unsigned32
  taskStackPos Unsigned32
  taskStackEnd Unsigned32
  taskStackSize Unsigned32
  taskStackSizeUsage Unsigned32
  taskStackMaxUsed Unsigned32
  taskStackFree Unsigned32
  taskErrorStatus Integer32

CpuTaskEntry  
SEQUENCE    
  cpuTaskId Integer32
  cpuTaskName OCTET STRING
  cpuTaskPri Integer32
  cpuTaskDeltaUtil Integer32
  cpuTaskDeltaTicks Integer32
  cpuTaskAverageUtil Integer32
  cpuTaskTotalTicks Integer32
  cpuTaskCurrentUtil Integer32

CpuUtilEntry  
SEQUENCE    
  cpuUtilCpuId Integer32
  cpuUtilDeltaUtil Integer32
  cpuUtilDeltaUsedTicks Integer32
  cpuUtilDeltaTicks Integer32
  cpuUtilDeltaTimes Integer32
  cpuUtilAverageUtil Integer32
  cpuUtilTotalUsedTicks Integer32
  cpuUtilTotalTicks Integer32
  cpuUtilTotalTimes Integer32
  cpuUtilCurrentUtil Integer32

SysRtrEntityEntry  
SEQUENCE    
  rtrEntityId INTEGER
  rtrEntityName DisplayString
  rtrEntityType INTEGER
  rtrEntityLogType INTEGER
  rtrEntityLogMaxSize INTEGER
  rtrEntityLogFilter INTEGER
  rtrEntityThreshold INTEGER
  rtrEntityRowStatus RowStatus

SysRtrGroupEntry  
SEQUENCE    
  rtrGroupId INTEGER
  rtrGroupName DisplayString
  rtrGroupInterval INTEGER
  rtrGroupEntityMembers DisplayString
  rtrGroupRowStatus RowStatus

SysRtrScheduleEntry  
SEQUENCE    
  rtrScheduleId Unsigned32
  rtrScheduleType INTEGER
  rtrScheduleObjId INTEGER
  rtrScheduleStartTimeFlag INTEGER
  rtrScheduleAfterTime DisplayString
  rtrScheduleStartTime DisplayString
  rtrScheduleAgeOut Unsigned32
  rtrScheduleLifeFlag INTEGER
  rtrScheduleLifeTime Unsigned32
  rtrScheduleRepeat Unsigned32
  rtrScheduleInterval Unsigned32
  rtrScheduleRowStatus RowStatus

SysRtrIcmpEchoEntry  
SEQUENCE    
  rtrIcmpEchoEntityId INTEGER
  rtrIcmpEchoTargetIp IpAddress
  rtrIcmpEchoPktNum Unsigned32
  rtrIcmpEchoPktLen INTEGER
  rtrIcmpEchoTimeout INTEGER
  rtrIcmpEchoSchInterval Unsigned32
  rtrIcmpEchoExtendFlag TruthValue
  rtrIcmpEchoVrfName DisplayString
  rtrIcmpEchoSourceIp IpAddress
  rtrIcmpEchoTos INTEGER
  rtrIcmpEchoSetDf TruthValue
  rtrIcmpEchoVerifyData TruthValue
  rtrIcmpEchoIsScheduling TruthValue
  rtrIcmpEchoPktTotalSend Counter32
  rtrIcmpEchoPktTotalRcvd Counter32
  rtrIcmpEchoSuccessRate INTEGER
  rtrIcmpEchoRowStatus RowStatus

SysRtrJitterEntry  
SEQUENCE    
  rtrJitterEntityId INTEGER
  rtrJitterState INTEGER
  rtrJitterTargetIp IpAddress
  rtrJitterTargetPort Unsigned32
  rtrJitterCodec INTEGER
  rtrJitterPktLen INTEGER
  rtrJitterPktNum INTEGER
  rtrJitterPktInterval INTEGER
  rtrJitterSchInterval Unsigned32
  rtrJitterSourceIp IpAddress
  rtrJitterSourcePort Unsigned32
  rtrJitterTimeout Unsigned32
  rtrJitterVrfName DisplayString
  rtrJitterTos INTEGER
  rtrJitterMinRtt INTEGER
  rtrJitterMaxRtt INTEGER
  rtrJitterPktLossSd INTEGER
  rtrJitterPktLossDs INTEGER
  rtrJitterDsMin INTEGER
  rtrJitterDsMax INTEGER
  rtrJitterSdMin INTEGER
  rtrJitterSdMax INTEGER
  rtrJitterDelayDsMin INTEGER
  rtrJitterDelayDsMax INTEGER
  rtrJitterDelaySdMin INTEGER
  rtrJitterDelaySdMax INTEGER
  rtrJitterIcpifMin DisplayString
  rtrJitterIcpifMax DisplayString
  rtrJitterMosMin DisplayString
  rtrJitterMosMax DisplayString
  rtrJitterRowStatus RowStatus

SysRtrFlowStatisticsEntry  
SEQUENCE    
  rtrFlStatisticsEntityId INTEGER
  rtrFlStatisticsIfName DisplayString
  rtrFlStatisticsInterval INTEGER
  rtrFlStaInputMaxPkts Counter64
  rtrFlStaTmInputMaxPkts DisplayString
  rtrFlStaInputMaxFlow Counter64
  rtrFlStaTmInputMaxFlow DisplayString
  rtrFlStaInputMinPkts Counter64
  rtrFlStaTmInputMinPkts DisplayString
  rtrFlStaInputMinFlow Counter64
  rtrFlStaTmInputMinFlow DisplayString
  rtrFlStaOutputMaxPkts Counter64
  rtrFlStaTmOutputMaxPkts DisplayString
  rtrFlStaOutputMaxFlow Counter64
  rtrFlStaTmOutputMaxFlow DisplayString
  rtrFlStaOutputMinPkts Counter64
  rtrFlStaTmOutputMinPkts DisplayString
  rtrFlStaOutputMinFlow Counter64
  rtrFlStaTmOutputMinFlow DisplayString
  rtrFlowStatisticsRowStatus RowStatus

SysRtrUdpechoEntry  
SEQUENCE    
  rtrUdpechoEntityId INTEGER
  rtrUdpechoState INTEGER
  rtrUdpechoTargetIp IpAddress
  rtrUdpechoTargetPort Unsigned32
  rtrUdpechoPktLen INTEGER
  rtrUdpechoSchInterval Unsigned32
  rtrUdpechoSourceIp IpAddress
  rtrUdpechoSourcePort Unsigned32
  rtrUdpechoTimeout Unsigned32
  rtrUdpechoVrfName DisplayString
  rtrUdpechoTos INTEGER
  rtrUdpechoPktLoss INTEGER
  rtrUdpechoPktSucc INTEGER
  rtrUdpechoDelay INTEGER
  rtrUdpechoDelayMin INTEGER
  rtrUdpechoDelayMax INTEGER
  rtrUdpechoRowStatus RowStatus

SysIfPktPriStaEntry  
SEQUENCE    
  sysIfPktPriority INTEGER
  sysIfIndex INTEGER
  sysIfDesc DisplayString
  sysIfInOctets Counter
  sysIfInUcastPkts Counter
  sysIfInNUcastPkts Counter
  sysIfInDiscards Counter
  sysIfInErrors Counter
  sysIfInUnkownProtos Counter
  sysIfOutOctets Counter
  sysIfOutUcastPkts Counter
  sysIfOutNUcastPkts Counter
  sysIfOutDiscards Counter
  sysIfOutErrors Counter

Defined Values

mpios 1.3.6.1.4.1.5651.3.20
The process and memory information of MP2600 infomation!
MODULE-IDENTITY    

iosSystem 1.3.6.1.4.1.5651.3.20.1
OBJECT IDENTIFIER    

iosObjects 1.3.6.1.4.1.5651.3.20.1.1
OBJECT IDENTIFIER    

sysMemory 1.3.6.1.4.1.5651.3.20.1.1.1
OBJECT IDENTIFIER    

numBytesFree 1.3.6.1.4.1.5651.3.20.1.1.1.1
The number of bytes free in the system memory
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

numBlocksFree 1.3.6.1.4.1.5651.3.20.1.1.1.2
The number of blocks free in the system memory
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

avgBlockSizeFree 1.3.6.1.4.1.5651.3.20.1.1.1.3
The average block size that is free in the system memory
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

maxBlockSizeFree 1.3.6.1.4.1.5651.3.20.1.1.1.4
The largest block size that is free in the memory
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

numBytesAlloc 1.3.6.1.4.1.5651.3.20.1.1.1.5
The number of bytes of system memory that have been allocated by tasks and system services
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

numBlocksAlloc 1.3.6.1.4.1.5651.3.20.1.1.1.6
The number of blocks of system memory that have been allocated in the system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

avgBlockSizeAlloc 1.3.6.1.4.1.5651.3.20.1.1.1.7
The average memory block size that has been allocated in the system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

memoryTotalBytes 1.3.6.1.4.1.5651.3.20.1.1.1.8
The total available memory bytes
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

allocBytesPercent 1.3.6.1.4.1.5651.3.20.1.1.1.9
The allocated bytes percent which value is allocated bytes divided by total bytes, This value can be in the range from 0 to 100.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysTask 1.3.6.1.4.1.5651.3.20.1.1.2
OBJECT IDENTIFIER    

taskTable 1.3.6.1.4.1.5651.3.20.1.1.2.1
Represents the target's task table. Each entry in this table represents a task
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TaskEntry

taskEntry 1.3.6.1.4.1.5651.3.20.1.1.2.1.1
Each entry contains information with regards to a task in the system
Status: current Access: not-accessible
OBJECT-TYPE    
  TaskEntry  

taskId 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.1
This is the task ID assigned by VxWorks to a task in the system. A taskId of zero specifies a new task.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

taskName 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.2
This is the name of the VxWorks task. This value can only be specified (set) at task creation.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

taskPriority 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.3
The priority of the VxWorks task. This value can be in the range from 0, the highest priority, to 255, the lowest priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

taskStatus 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.4
This field specifies the current task status. It can be used to change the current task state. For example, to suspend a task, the value of taskStatus is changed to task-suspended, to delete a task the value is changed to task-deleted, etc...
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER task-ready(1), task-suspended(2), task-delay(3), task-deleted(4)  

taskOptions 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.5
This value represents the sum of the following options: value option 1 VX_SUPERVISOR_MODE(read-only) 2 VX_UNBREAKABLE (break points ignored) 4 VX_DEALLOC_STACK (deallocate stack) 8 VX_FP_TASK (floating point support) 16 VX_STDIO (read-only) 128 VX_PRIVATE_ENV (private env. variables) 256 VX_NO_STACK_FILL (don't fill stack) All the options above can be set at task creation time. However, once the task is executing the only option that can be changed is VX_UNBREAKABLE. The option is toggled based on the current setting.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

taskMain 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.6
This is the name of the entry function for the VxWorks task. This name can only be specified when a task is created (entry added in the table). The symbol must exist in the VxWorks target.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

taskStackPtr 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.7
This is the saved stack pointer for the task.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

taskStackBase 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.8
This is the address of the bottom of the stack of the VxWorks task.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

taskStackPos 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.9
This is the effective top of the stack in the current task state.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

taskStackEnd 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.10
This is the address of the top of the stack of the VxWorks task.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

taskStackSize 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.11
This is the actual size of the stack in bytes. The size of the stack can only be specified at task creation (adding an entry to the table).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

taskStackSizeUsage 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.12
The number of bytes currently in use by the task from the stack.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

taskStackMaxUsed 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.13
This is the maximum number of bytes that have been used by the task from the stack.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

taskStackFree 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.14
This is the number of bytes that are free currently in the task stack.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

taskErrorStatus 1.3.6.1.4.1.5651.3.20.1.1.2.1.1.15
This is the most recent error status for this task.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

taskDescr 1.3.6.1.4.1.5651.3.20.1.1.2.2
This is description for error task. If the task runs well the string will be null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysCpu 1.3.6.1.4.1.5651.3.20.1.1.3
OBJECT IDENTIFIER    

sysCpuStatus 1.3.6.1.4.1.5651.3.20.1.1.3.1
This is the status of collecting CPU utilization rate which include two status: spyCpu (2), noSpyCpu(1), if you want to get cpuUtilTable and cpuTaskTable, you must make status to spy cpu
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noSpyCpu(1), spyCpu(2)  

sysCpuTaskTabView 1.3.6.1.4.1.5651.3.20.1.1.3.2
This is the status of cpuTaskTable view: detailed view is showing every task info and simple view is only showing task which had used cpu
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER detailed(1), simple(2)  

checkCpuTimeInterval 1.3.6.1.4.1.5651.3.20.1.1.3.3
check cpu time interval,unit is second
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..3600  

cpuTaskTable 1.3.6.1.4.1.5651.3.20.1.1.3.4
Represents the target's task cpu table. Each entry in this table represents a task
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpuTaskEntry

cpuTaskEntry 1.3.6.1.4.1.5651.3.20.1.1.3.4.1
Each entry contains information with regards to a task cpu in the system
Status: current Access: not-accessible
OBJECT-TYPE    
  CpuTaskEntry  

cpuTaskId 1.3.6.1.4.1.5651.3.20.1.1.3.4.1.1
This is the task ID assigned by VxWorks to a task in the system. A taskId of zero specifies a new task.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuTaskName 1.3.6.1.4.1.5651.3.20.1.1.3.4.1.2
This is the name of the VxWorks task. This value can only be specified (set) at task creation.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

cpuTaskPri 1.3.6.1.4.1.5651.3.20.1.1.3.4.1.3
The priority of the VxWorks task. This value can be in the range from 0, the highest priority, to 255, the lowest priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuTaskDeltaUtil 1.3.6.1.4.1.5651.3.20.1.1.3.4.1.4
The CPU utilization of the VxWorks task during DeltaTicks. This value can be in the range from 0 to 100.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuTaskDeltaTicks 1.3.6.1.4.1.5651.3.20.1.1.3.4.1.5
The task CPU utilization delta ticks.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuTaskAverageUtil 1.3.6.1.4.1.5651.3.20.1.1.3.4.1.6
The CPU utilization of the VxWorks task during TotalTicks. This value can be in the range from 0 to 100.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuTaskTotalTicks 1.3.6.1.4.1.5651.3.20.1.1.3.4.1.7
The total ticks till cpuTaskStatus been start, until the status be end.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuTaskCurrentUtil 1.3.6.1.4.1.5651.3.20.1.1.3.4.1.8
The cpu current utilization
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilTable 1.3.6.1.4.1.5651.3.20.1.1.3.5
The Sys CPU total utilization table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpuUtilEntry

cpuUtilEntry 1.3.6.1.4.1.5651.3.20.1.1.3.5.1
The Sys CPU utilization table at a certain period of time, include two kind of time interval: one is from spy cpu to current show cpu, the other is from last show cpu to current show cpu
Status: current Access: not-accessible
OBJECT-TYPE    
  CpuUtilEntry  

cpuUtilCpuId 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.1
cpu id for multi-cpu device
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilDeltaUtil 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.2
The Sys CPU utilization in delta times
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilDeltaUsedTicks 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.3
The System used ticks in delta ticks
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilDeltaTicks 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.4
The Sys CPU utilization ticks in delta times
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilDeltaTimes 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.5
The delta times, unit is second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilAverageUtil 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.6
The Sys CPU utilization in total times
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilTotalUsedTicks 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.7
The Sys CPU utilization used ticks in total times
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilTotalTicks 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.8
The Sys CPU utilization ticks in total times
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilTotalTimes 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.9
The total times, unit is second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpuUtilCurrentUtil 1.3.6.1.4.1.5651.3.20.1.1.3.5.1.10
The cpu current utilization
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sysTemperature 1.3.6.1.4.1.5651.3.20.1.1.4
OBJECT IDENTIFIER    

sysCpuTemper 1.3.6.1.4.1.5651.3.20.1.1.4.1
Get current system environment cpu temperature
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sysCpuAlertTemper 1.3.6.1.4.1.5651.3.20.1.1.4.2
Get or set current system environment cpu alarm temperature default is 85 C
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysMainBoardTemper 1.3.6.1.4.1.5651.3.20.1.1.4.3
Get current system environment main borad temperature
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sysMainBoardAlertTemper 1.3.6.1.4.1.5651.3.20.1.1.4.4
Get or set current system environment main board alarm temperature default is 65 C
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysAlertTrapInt 1.3.6.1.4.1.5651.3.20.1.1.4.5
Send alert trap time interval when system temperature is always more than alert temperature, unit is second,default is 60 s
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysNFI 1.3.6.1.4.1.5651.3.20.1.1.200
OBJECT IDENTIFIER    

sysRtrGbl 1.3.6.1.4.1.5651.3.20.1.1.200.1
OBJECT IDENTIFIER    

sysRtrCtrl 1.3.6.1.4.1.5651.3.20.1.1.200.1.1
RTR global switch enable--enable RTR module disable--no RTR module
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

sysRtrResponder 1.3.6.1.4.1.5651.3.20.1.1.200.1.2
Rtr Responder TRUE--Rtr Responder False--no Rtr Responder on valid in jitter entity now
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sysRtrEntityMgt 1.3.6.1.4.1.5651.3.20.1.1.200.2
OBJECT IDENTIFIER    

sysRtrEntityTable 1.3.6.1.4.1.5651.3.20.1.1.200.2.100
Rtr entity table,config or view information about Rtr entity
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysRtrEntityEntry

sysRtrEntityEntry 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1
Rtr entity,config or view information about Rtr entity
Status: current Access: not-accessible
OBJECT-TYPE    
  SysRtrEntityEntry  

rtrEntityId 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.1
Rtr entity Id,index
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2000  

rtrEntityName 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.2
rtr entity name,araised aumatically,read-only
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrEntityType 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.3
rtr entity,inlcuding icmpEcho,jitter,flow statistics,udpecho
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER icmpEcho(1), jitter(2), flowStatistics(3), udpecho(4)  

rtrEntityLogType 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.4
RTR entity logging type local -stored in the device file system remote -remote services
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

rtrEntityLogMaxSize 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.5
rtr entity's log with max lines, if log type is local
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

rtrEntityLogFilter 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.6
RTR entity log filter options
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), error(2), overThreshold(3)  

rtrEntityThreshold 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.7
RTR entity log filter threshhod,only valid with icmpEcho entity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

rtrEntityRowStatus 1.3.6.1.4.1.5651.3.20.1.1.200.2.100.1.8
rtr entity row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sysRtrGroupMgt 1.3.6.1.4.1.5651.3.20.1.1.200.3
OBJECT IDENTIFIER    

sysRtrGroupTable 1.3.6.1.4.1.5651.3.20.1.1.200.3.100
Rtr group table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysRtrGroupEntry

sysRtrGroupEntry 1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1
Rtr group entity
Status: current Access: not-accessible
OBJECT-TYPE    
  SysRtrGroupEntry  

rtrGroupId 1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.1
rtr group id,index
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2000  

rtrGroupName 1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.2
rtr group name,araised aumatically, read-only
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrGroupInterval 1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.3
rtr group interval, seconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..10000  

rtrGroupEntityMembers 1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.4
RTR group members string type 1 3 10-20 50 string length no more than 255, separated by comma,no space in the string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

rtrGroupRowStatus 1.3.6.1.4.1.5651.3.20.1.1.200.3.100.1.5
rtr group table row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sysRtrScheduleMgt 1.3.6.1.4.1.5651.3.20.1.1.200.4
OBJECT IDENTIFIER    

sysRtrScheduleTable 1.3.6.1.4.1.5651.3.20.1.1.200.4.100
rtr schedule table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysRtrScheduleEntry

sysRtrScheduleEntry 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1
rtr schedule table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SysRtrScheduleEntry  

rtrScheduleId 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.1
rtr schedule Id,index
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

rtrScheduleType 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.2
rtr schedule type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER entity(1), group(2)  

rtrScheduleObjId 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.3
id of rtrschedule object which means rtr group or entity.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2000  

rtrScheduleStartTimeFlag 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.4
RTR schedule start time startNow >> afterTime >> startTime--start at the given time
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER startNow(1), afterTime(2), startTime(3)  

rtrScheduleAfterTime 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.5
RTR schedule given time type string HH:MM:SS valid when sysRtrScheduleFlag is afterTime +/-.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

rtrScheduleStartTime 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.6
RTR schedule given time type string HH:MM:SS,mm,dd,yyyy valid when sysRtrScheduleFlag is startTime.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrScheduleAgeOut 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.7
rtr schedule ageout time in second.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2073600  

rtrScheduleLifeFlag 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.8
rtr schedule's life forever,if config, no need to config lifetime and repeat times repeatAndDie,if config, need to config lifetime and repeat times
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forever(1), repeatAndDie(2)  

rtrScheduleLifeTime 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.9
rtr schedule's lieftime in second, valid only when rtrScheduleLifeFlag is repeatAndDie.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2147483647  

rtrScheduleRepeat 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.10
rtr schedule's repeat times, valid only when rtrScheduleLifeFlag is repeatAndDie.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2147483647  

rtrScheduleInterval 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.11
rtr schedule interval in second
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

rtrScheduleRowStatus 1.3.6.1.4.1.5651.3.20.1.1.200.4.100.1.12
rtr schedule row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sysRtrIcmpEchoMgt 1.3.6.1.4.1.5651.3.20.1.1.200.5
OBJECT IDENTIFIER    

sysRtrIcmpEchoTable 1.3.6.1.4.1.5651.3.20.1.1.200.5.100
RTR ICMP entity table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysRtrIcmpEchoEntry

sysRtrIcmpEchoEntry 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1
RTR ICMP entity entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SysRtrIcmpEchoEntry  

rtrIcmpEchoEntityId 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.1
ICMP entity ID,index
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2000  

rtrIcmpEchoTargetIp 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.2
ICMPECHO(ping) destination address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rtrIcmpEchoPktNum 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.3
ICMP PING send packets number once
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..200000000  

rtrIcmpEchoPktLen 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.4
ICMP PING send packets size
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 36..18024  

rtrIcmpEchoTimeout 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.5
ICMP ping reply timeout in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..3600  

rtrIcmpEchoSchInterval 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.6
IcmpEcho interval in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2147483647  

rtrIcmpEchoExtendFlag 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.7
ICMP extern ping flag, have set Tos,verify data,DF,sourceIp and vrf or yet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rtrIcmpEchoVrfName 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.8
vrfname type string, valid only rtrIcmpEchoExtendFlag is TRUE
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrIcmpEchoSourceIp 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.9
ICMP source IP address, valid only rtrIcmpEchoExtendFlag is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rtrIcmpEchoTos 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.10
ICMP TOS value, valid only rtrIcmpEchoExtendFlag is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rtrIcmpEchoSetDf 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.11
ICMP pakcet DF bit, valid only rtrIcmpEchoExtendFlag is TRUE
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rtrIcmpEchoVerifyData 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.12
ICMP verifay data flag, valid only rtrIcmpEchoExtendFlag is TRUE
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

rtrIcmpEchoIsScheduling 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.13
whether icmpEcho entity is in scheduling
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rtrIcmpEchoPktTotalSend 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.14
total packets which send by the ICMP entity.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rtrIcmpEchoPktTotalRcvd 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.15
total packets which receive by the ICMP entity.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rtrIcmpEchoSuccessRate 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.16
total success rate till now
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

rtrIcmpEchoRowStatus 1.3.6.1.4.1.5651.3.20.1.1.200.5.100.1.17
ICMP row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sysRtrJitterMgt 1.3.6.1.4.1.5651.3.20.1.1.200.6
OBJECT IDENTIFIER    

sysRtrJitterTable 1.3.6.1.4.1.5651.3.20.1.1.200.6.100
RTR JITTER entity table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysRtrJitterEntry

sysRtrJitterEntry 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1
RTR JITTER entity entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SysRtrJitterEntry  

rtrJitterEntityId 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.1
JITTER entity id,index
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2000  

rtrJitterState 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.2
JITTE entity 1 -init 2 -close 3 -send request 4-send packets 5 -finish
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER init(1), closed(2), request(3), transmit(4), finished(5)  

rtrJitterTargetIp 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.3
JITTER responder destination ip address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rtrJitterTargetPort 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.4
JITTER responder destination port
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

rtrJitterCodec 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.5
JITTER codec type,including: 1 G711MULAW,2 G711ALAW,3 G729A,4 USER_DEFINED 5 UNKOWN
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER g711MULAW(1), g711ALAW(2), g729A(3), userDefined(4), invalid(5)  

rtrJitterPktLen 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.6
JITTER codec packet length, read-writable when rtrJitterCodec is USER_DEFINED else read-only type:byte.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 16..1500  

rtrJitterPktNum 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.7
JITTER codec packet number, read-writable when rtrJitterCodec is USER_DEFINED else read-only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..6000  

rtrJitterPktInterval 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.8
JITTER codec packet send interval, read-writable when rtrJitterCodec is USER_DEFINED else read-only, type:ms
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..6000  

rtrJitterSchInterval 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.9
Jitter schedule interval, read-writable when rtrJitterCodec is USER_DEFINED else read-only, type:s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2147483647  

rtrJitterSourceIp 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.10
JITTER source IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rtrJitterSourcePort 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.11
JITTER source port
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

rtrJitterTimeout 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.12
JITTER timeout value,type:ms, notice,the value must no less than then interval between two schedule
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..604800000  

rtrJitterVrfName 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.13
JITTER vrf
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrJitterTos 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.14
JITTER pakcet TOS value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rtrJitterMinRtt 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.15
JITTER minimal round-trip-time value in ms
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterMaxRtt 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.16
JITTER maximal round-trip-time value in ms
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterPktLossSd 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.17
JITTER total lossed pakcets which send by the source
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterPktLossDs 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.18
JITTER total loss pakcets which send by the target
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterDsMin 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.19
JITTER minimal destination to source jitter in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterDsMax 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.20
JITTER maximal destionation to source jitter in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterSdMin 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.21
JITTER minimal source to destination jitter in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterSdMax 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.22
JITTER maximal source to destination jitter in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterDelayDsMin 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.23
JITTER minimal destination to source delay in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterDelayDsMax 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.24
JITTER maximal destination to source delay in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterDelaySdMin 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.25
JITTER minimal souce to destionation delay in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterDelaySdMax 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.26
JITTER maximal source to destination delay in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrJitterIcpifMin 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.27
JITTER minimal icpif
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrJitterIcpifMax 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.28
JITTER maximal icpif
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrJitterMosMin 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.29
JITTER minimal MOS
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrJitterMosMax 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.30
JITTER maximal MOS
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrJitterRowStatus 1.3.6.1.4.1.5651.3.20.1.1.200.6.100.1.31
JITTER row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sysRtrFlowStatisticsMgt 1.3.6.1.4.1.5651.3.20.1.1.200.7
OBJECT IDENTIFIER    

sysRtrFlowStatisticsTable 1.3.6.1.4.1.5651.3.20.1.1.200.7.100
RTR flow statistics table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysRtrFlowStatisticsEntry

sysRtrFlowStatisticsEntry 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1
RTR flow statistics entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SysRtrFlowStatisticsEntry  

rtrFlStatisticsEntityId 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.1
flow statistics entity Id
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2000  

rtrFlStatisticsIfName 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.2
interface name which will be statistic
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlStatisticsInterval 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.3
monitor interval in second
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 10..600  

rtrFlStaInputMaxPkts 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.4
maximal pakcets received once sampling period
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rtrFlStaTmInputMaxPkts 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.5
maximal time between minimal received packets number and miximal received packets number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlStaInputMaxFlow 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.6
maximal flow value received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rtrFlStaTmInputMaxFlow 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.7
maximal time between minimal flow value and miximal flow vlaue
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlStaInputMinPkts 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.8
minimal pakcets received once sampling period
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rtrFlStaTmInputMinPkts 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.9
minimal time between minimal packets number and miximal packets number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlStaInputMinFlow 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.10
minimal flow value received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rtrFlStaTmInputMinFlow 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.11
minimal time between minimal flow value and miximal flow vlaue
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlStaOutputMaxPkts 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.12
maximal pakcets send once sampling period
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rtrFlStaTmOutputMaxPkts 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.13
maximal time between minimal send packets number and miximal send packets number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlStaOutputMaxFlow 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.14
maximal flow send
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rtrFlStaTmOutputMaxFlow 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.15
maximal time between minimal send flow and miximal send flow
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlStaOutputMinPkts 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.16
minimal pakcets send once sampling period
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rtrFlStaTmOutputMinPkts 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.17
minimal time between minimal send packets number and miximal send packets number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlStaOutputMinFlow 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.18
minimal flow send
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rtrFlStaTmOutputMinFlow 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.19
minimal time between minimal send flow and miximal send flow
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrFlowStatisticsRowStatus 1.3.6.1.4.1.5651.3.20.1.1.200.7.100.1.20
flow statistics row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sysRtrUdpechoMgt 1.3.6.1.4.1.5651.3.20.1.1.200.8
OBJECT IDENTIFIER    

sysRtrUdpechoTable 1.3.6.1.4.1.5651.3.20.1.1.200.8.100
RTR UDPECHO entity table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysRtrUdpechoEntry

sysRtrUdpechoEntry 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1
RTR UDPECHO entity entry
Status: current Access: not-accessible
OBJECT-TYPE    
  SysRtrUdpechoEntry  

rtrUdpechoEntityId 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.1
UDPECHO entity id,index
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2000  

rtrUdpechoState 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.2
UDPECHO entity 1 -init 2 -close 3 -send request 4-send packets 5 -finish
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER init(1), closed(2), request(3), transmit(4), finished(5)  

rtrUdpechoTargetIp 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.3
UDPECHO responder destination ip address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rtrUdpechoTargetPort 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.4
UDPECHO responder destination port
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

rtrUdpechoPktLen 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.5
UDPECHO packet length
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 4..1500  

rtrUdpechoSchInterval 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.6
UDPECHO schedule interval, type:s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

rtrUdpechoSourceIp 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.7
UDPECHO source IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

rtrUdpechoSourcePort 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.8
UDPECHO source port
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65535  

rtrUdpechoTimeout 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.9
UDPECHO timeout value,type:ms, notice,the value must no less than then interval between two schedule
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..604800000  

rtrUdpechoVrfName 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.10
UDPECHO vrf
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

rtrUdpechoTos 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.11
UDPECHO pakcet TOS value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

rtrUdpechoPktLoss 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.12
UDPECHO total lossed pakcets which send by the source
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrUdpechoPktSucc 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.13
UDPECHO total pakcets sent and received successfully
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrUdpechoDelay 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.14
UDPECHO destination to source and source to destinatino delay in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrUdpechoDelayMin 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.15
UDPECHO maximal destination to source and source to destinatino delay in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrUdpechoDelayMax 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.16
UDPECHO maximal destination to source and source to destinatino delay in millisecond
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rtrUdpechoRowStatus 1.3.6.1.4.1.5651.3.20.1.1.200.8.100.1.17
UDPECHO row status
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

sysIfStatistic 1.3.6.1.4.1.5651.3.20.1.1.300
OBJECT IDENTIFIER    

sysIfPktPriStatistics 1.3.6.1.4.1.5651.3.20.1.1.300.1
OBJECT IDENTIFIER    

sysIfPktPriStaTable 1.3.6.1.4.1.5651.3.20.1.1.300.1.100
The statistics of interface's flow based on the precedence of IP packet. The index of this table is priority and ifIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysIfPktPriStaEntry

sysIfPktPriStaEntry 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1
The statistics of interface's flow based on the precedence of IP packet. The index of this table is priority and ifIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SysIfPktPriStaEntry  

sysIfPktPriority 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.1
The precedence of IP packet, it start from 1 to 9. Numeric one represent the precedence 0, two represent 1 and so on. 9 represent the number of non-IP packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER priority0(1), priority1(2), priority2(3), priority3(4), priority4(5), priority5(6), priority6(7), priority7(8), other(9)  

sysIfIndex 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.2
The index of interface in the system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysIfDesc 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.3
The name of interface assigned to
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

sysIfInOctets 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.4
The interface received bytes at specified precedence
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfInUcastPkts 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.5
The number of subnetwork-unicast packets delivered to a higher-layer protocol with specified precedence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfInNUcastPkts 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.6
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfInDiscards 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.7
The number of inbound packets which were chosen to be discarded
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfInErrors 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.8
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfInUnkownProtos 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.9
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfOutOctets 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.10
The total number of octets transmitted out of the interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfOutUcastPkts 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.11
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfOutNUcastPkts 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.12
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfOutDiscards 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.13
The number of outbound packets which were chosen to be even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

sysIfOutErrors 1.3.6.1.4.1.5651.3.20.1.1.300.1.100.1.14
The number of outbound packets that could not be transmitted because of errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter