MOTOROLA-PTP-MIB
File:
MOTOROLA-PTP-MIB.mib (13857 bytes)
Imported modules
Imported symbols
Defined Values
motorola |
1.3.6.1.4.1.17713 |
OBJECT IDENTIFIER |
|
|
|
ptp |
1.3.6.1.4.1.17713.1 |
OBJECT IDENTIFIER |
|
|
|
ptmp |
1.3.6.1.4.1.17713.2 |
OBJECT IDENTIFIER |
|
|
|
licence |
1.3.6.1.4.1.17713.1.8 |
OBJECT IDENTIFIER |
|
|
|
mgmt |
1.3.6.1.4.1.17713.1.9 |
OBJECT IDENTIFIER |
|
|
|
phyControl |
1.3.6.1.4.1.17713.1.10 |
OBJECT IDENTIFIER |
|
|
|
phyStatus |
1.3.6.1.4.1.17713.1.12 |
OBJECT IDENTIFIER |
|
|
|
reset |
1.3.6.1.4.1.17713.1.18 |
OBJECT IDENTIFIER |
|
|
|
versions |
1.3.6.1.4.1.17713.1.19 |
OBJECT IDENTIFIER |
|
|
|
pubStats |
1.3.6.1.4.1.17713.1.20 |
OBJECT IDENTIFIER |
|
|
|
encryption |
1.3.6.1.4.1.17713.1.22 |
OBJECT IDENTIFIER |
|
|
|
ptpTraps |
1.3.6.1.4.1.17713.1.99 |
OBJECT IDENTIFIER |
|
|
|
iPAddress |
1.3.6.1.4.1.17713.1.5.1 |
Internet protocol (IP) address. This address is used by
the family of Internet protocols to uniquely this
identify the unit on a network |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
subnetMask |
1.3.6.1.4.1.17713.1.5.2 |
A subnet allows the flow of network traffic between
hosts to be segregated based on a network
configuration. By organizing hosts into
logical groups, subnetting can improve network
security and performance |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
gatewayIPAddress |
1.3.6.1.4.1.17713.1.5.3 |
The IP address of a computer on the current network that
is currently acting as a network gateway. A gateway
acts as an entrance / exit to packets from / to
other networks |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
targetMACAddress |
1.3.6.1.4.1.17713.1.5.4 |
MAC address of the PTP wireless unit forming the other
end of the PTP link |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(6) |
|
masterSlaveMode |
1.3.6.1.4.1.17713.1.5.5 |
The PTP wireless link operates using a master and slave
relationship |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
master(0), slave(1) |
|
maximumTransmitPower |
1.3.6.1.4.1.17713.1.5.6 |
Maximum transmit power the wireless unit is permitted to
use when establishing and maintaining the wireless
link |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-15..25 |
|
regionCode |
1.3.6.1.4.1.17713.1.8.1 |
The region code prohibits the wireless unit from
operating outside the regulated limits |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..31 |
|
productVariant |
1.3.6.1.4.1.17713.1.8.2 |
The product variant |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
motorola-ptp-xx400-full(0), motorola-ptp-xx400-full(1), motorola-ptp-xx400-full(2), motorola-ptp-xx400-lite(3), spare-1(4), spare-2(5), spare-3(6), spare-4(7), spare-5(8), spare-6(9), spare-7(10), motorola-ptp-xx600-lite(11), motorola-ptp-xx600-full(12) |
|
productName |
1.3.6.1.4.1.17713.1.8.3 |
Name of the product variant |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
ethernetFibreSupport |
1.3.6.1.4.1.17713.1.8.4 |
Gigabit Ethernet fibre support |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
frequencyVariant |
1.3.6.1.4.1.17713.1.8.5 |
Frequency variant of the wireless unit |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
freq-5800-mhz(0), freq-5400-mhz(1), freq-4900-mhz(2) |
|
targetRange |
1.3.6.1.4.1.17713.1.9.1 |
Initial target range used in installation +/-1,
expressed in tenths of a kilometer. When
Auto-Ranging this must be set to 0 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..2000 |
|
rangingMode |
1.3.6.1.4.1.17713.1.9.2 |
Type of ranging to use during installation, either
Auto-Ranging or use a selectable Target
Range |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto-0-5-km(0), auto-0-40-km(1), auto-0-100-km(2), auto-0-200-km(3), target-range(4) |
|
asymmetricTDD |
1.3.6.1.4.1.17713.1.10.1 |
Control TDD Structure |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
symmetric-data-rate-1-to-1(0), asymmetric-data-rate-2-to-1(1), prohibited(2), latency-optimised(3) |
|
receivePower |
1.3.6.1.4.1.17713.1.12.1 |
Receive power expressed in tenths of a dBm |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vectorError |
1.3.6.1.4.1.17713.1.12.2 |
The vector error measurement compares the received
signal's IQ modulation characteristics to an
ideal signal to determine the composite error
vector magnitude. The value represented by this
attribute is the average vector error over the
previous second expressed in tenths of a dB |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
transmitPower |
1.3.6.1.4.1.17713.1.12.3 |
Transmit power expressed in tenths of a dBm |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
range |
1.3.6.1.4.1.17713.1.12.4 |
Distance between the two peer wireless units expressed
in tenths of a kilometer |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
linkLoss |
1.3.6.1.4.1.17713.1.12.5 |
The wireless link loss expressed in tenths of a dB |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-500..500 |
|
receiveChannel |
1.3.6.1.4.1.17713.1.12.6 |
Current active receive channel |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..21 |
|
transmitChannel |
1.3.6.1.4.1.17713.1.12.7 |
Current active transmit channel |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..21 |
|
receiveModulationMode |
1.3.6.1.4.1.17713.1.12.8 |
Current active receive modulation mode |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
mod-acquisition(0), mod-bpsk-1-2(1), mod-qpsk-1-2(2), mod-qpsk-2-3(3), mod-16qam-1-2(4), mod-16qam-3-4(5), mod-64qam-2-3(6), mod-64qam-3-4(7), mod-64qam-7-8(8) |
|
transmitModulationMode |
1.3.6.1.4.1.17713.1.12.9 |
Current active transmit modulation mode |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
mod-acquisition(0), mod-bpsk-1-2(1), mod-qpsk-1-2(2), mod-qpsk-2-3(3), mod-16qam-1-2(4), mod-16qam-3-4(5), mod-64qam-2-3(6), mod-64qam-3-4(7), mod-64qam-7-8(8) |
|
receiveFreq |
1.3.6.1.4.1.17713.1.12.11 |
Current receive frequency expressed in MHz |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..5875 |
|
transmitFreq |
1.3.6.1.4.1.17713.1.12.12 |
Current transmit frequency expressed in MHz |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..5875 |
|
signalStrengthRatio |
1.3.6.1.4.1.17713.1.12.13 |
Signal strength ratio (Vertical / Horizontal) expressed
in tenths of a dB |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
systemReset |
1.3.6.1.4.1.17713.1.18.1 |
Setting this attribute to '1' will cause a system
reboot |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
running(0), console-reboot(1) |
|
softwareVersion |
1.3.6.1.4.1.17713.1.19.1 |
Current software version |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
hardwareVersion |
1.3.6.1.4.1.17713.1.19.2 |
Hardware platform version |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
secondarySoftwareVersion |
1.3.6.1.4.1.17713.1.19.3 |
Secondary software version, used when the primary
software image is invalid or erased |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
bootVersion |
1.3.6.1.4.1.17713.1.19.4 |
Boot code software version |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
receiveDataRate |
1.3.6.1.4.1.17713.1.20.1 |
Average data rate over the last one second interval
expressed in kbps |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
transmitDataRate |
1.3.6.1.4.1.17713.1.20.2 |
Average data rate over the last one second interval
expressed in kbps |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
aggregateDataRate |
1.3.6.1.4.1.17713.1.20.3 |
Average data rate over the last one second interval
expressed in kbps |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
encryptionAlgorithm |
1.3.6.1.4.1.17713.1.22.1 |
The Encryption Algorithm used by the wireless link. You
should be aware that enabling encryption results
in a reduction in available data bandwidth N.B. The
same Encryption Algorithm must be configured at BOTH
ends of the link for it to function correctly |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), aes-rijndael(1), aes-256-bit-rijndael(2) |
|
dfsChannelChangeTrap |
1.3.6.1.4.1.17713.1.99.1 |
DFS channel change event |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|