MITEL-RIP2EXTENSION-MIB

File: MITEL-RIP2EXTENSION-MIB.mib (3745 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RIPv2-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE enterprises
RowStatus rip2IfConfAddress

Defined Types

MitelRipExtGrpIfConfEntry  
SEQUENCE    
  mitelIfConfTblSendDefaultRoutes INTEGER
  mitelIfConfTblRipType INTEGER
  mitelIfConfTblRowStatus RowStatus

Defined Values

mitelRouterRipExtensionGroup 1.3.6.1.4.1.1027.4.8.1.6
The MITEL RIP2 IfConf Extension MIB module.
MODULE-IDENTITY    

mitel 1.3.6.1.4.1.1027
OBJECT IDENTIFIER    

mitelProprietary 1.3.6.1.4.1.1027.4
OBJECT IDENTIFIER    

mitelPropIpNetworking 1.3.6.1.4.1.1027.4.8
OBJECT IDENTIFIER    

mitelIpNetRouter 1.3.6.1.4.1.1027.4.8.1
OBJECT IDENTIFIER    

mitelRipExtGrpIfConfTable 1.3.6.1.4.1.1027.4.8.1.6.1
A table containing information about logical LAN destinations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MitelRipExtGrpIfConfEntry

mitelRipExtGrpIfConfEntry 1.3.6.1.4.1.1027.4.8.1.6.1.1
The entries in this table provide additional information to the Rip2IfConf table from RFC 1724.
Status: current Access: not-accessible
OBJECT-TYPE    
  MitelRipExtGrpIfConfEntry  

mitelIfConfTblSendDefaultRoutes 1.3.6.1.4.1.1027.4.8.1.6.1.1.1
This entry determines whether default routes are sent with RIP information for this IP address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mitelIfConfTblRipType 1.3.6.1.4.1.1027.4.8.1.6.1.1.2
This entry determines which type of RIP to use on this IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rip(1), triggerRip(2)  

mitelIfConfTblRowStatus 1.3.6.1.4.1.1027.4.8.1.6.1.1.3
The current status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus