MICOM-GCM-MIB

File: MICOM-GCM-MIB.mib (76026 bytes)

Imported modules

RFC-1212 RFC-1215 SNMPv2-TC
MICOM-OSCAR-MIB MICOM-SYS-MIB

Imported symbols

OBJECT-TYPE TRAP-TYPE DisplayString
micom-oscar mcmSysAsciiTimeOfDay

Defined Types

McmGcmLinkEntry  
SEQUENCE    
  mcmGcmLinkIndex INTEGER
  mcmGcmLinkUnitIndex INTEGER
  mcmGcmLinkName DisplayString
  mcmGcmLinkSigType INTEGER
  mcmGcmLinkSigPcmIndex INTEGER
  mcmGcmLinkSigOperStatus INTEGER
  mcmGcmLinkProtoType INTEGER
  mcmGcmLinkProtoPcmIndex INTEGER
  mcmGcmLinkProtoStatus INTEGER
  mcmGcmLinkVoiceCalls INTEGER

McmGcmUnitEntry  
SEQUENCE    
  mcmGcmUnitIndex INTEGER
  mcmGcmUnitName DisplayString
  mcmGcmUnitAdminStatus INTEGER
  mcmGcmUnitTimerAdminStatus INTEGER
  mcmGcmUnitSwitchType INTEGER
  mcmGcmUnitSwitchDelay INTEGER
  mcmGcmUnitPrimaryLinkIndex INTEGER
  mcmGcmUnitBackupRemainTime INTEGER
  mcmGcmUnitBackupSwitchDelay INTEGER
  mcmGcmUnitPrimarySwitchDelay INTEGER
  mcmGcmUnitRegionalLinkIndex INTEGER
  mcmGcmUnitModeCfg INTEGER
  mcmGcmUnitPriLinkFailMonStatus INTEGER
  mcmGcmUnitPriLinkFailMonDurMin INTEGER
  mcmGcmUnitPriLinkFailMonThrshld INTEGER
  mcmGcmUnitPriLinkFailMonCount INTEGER
  mcmGcmUnitCmd INTEGER

McmGcmBackupCfgEntry  
SEQUENCE    
  mcmGcmBackupCfgIndex INTEGER
  mcmGcmBackupCfgUnitIndex INTEGER
  mcmGcmBackupCfgLinkIndex INTEGER

McmGcmTimerEntry  
SEQUENCE    
  mcmGcmTimerIndex INTEGER
  mcmGcmTimerUnitIndex INTEGER
  mcmGcmTimerInactStartHr INTEGER
  mcmGcmTimerInactStartMin INTEGER
  mcmGcmTimerInactDurationHr INTEGER
  mcmGcmTimerInactDurationMin INTEGER
  mcmGcmTimerInactMonday INTEGER
  mcmGcmTimerInactTuesday INTEGER
  mcmGcmTimerInactWednesday INTEGER
  mcmGcmTimerInactThursday INTEGER
  mcmGcmTimerInactFriday INTEGER
  mcmGcmTimerInactSaturday INTEGER
  mcmGcmTimerInactSunday INTEGER
  mcmGcmTimerInactPeriodic INTEGER

NvmGcmLinkEntry  
SEQUENCE    
  nvmGcmLinkIndex INTEGER
  nvmGcmLinkUnitIndex INTEGER
  nvmGcmLinkName DisplayString
  nvmGcmLinkSigType INTEGER
  nvmGcmLinkSigPcmIndex INTEGER
  nvmGcmLinkProtoType INTEGER
  nvmGcmLinkProtoPcmIndex INTEGER
  nvmGcmLinkRowStatus INTEGER

NvmGcmUnitEntry  
SEQUENCE    
  nvmGcmUnitIndex INTEGER
  nvmGcmUnitName DisplayString
  nvmGcmUnitAdminStatus INTEGER
  nvmGcmUnitTimerAdminStatus INTEGER
  nvmGcmUnitSwitchType INTEGER
  nvmGcmUnitSwitchDelay INTEGER
  nvmGcmUnitPrimaryLinkIndex INTEGER
  nvmGcmUnitBackupRemainTime INTEGER
  nvmGcmUnitBackupSwitchDelay INTEGER
  nvmGcmUnitPrimarySwitchDelay INTEGER
  nvmGcmUnitRegionalLinkIndex INTEGER
  nvmGcmUnitModeCfg INTEGER
  nvmGcmUnitPriLinkFailMonStatus INTEGER
  nvmGcmUnitPriLinkFailMonDurMin INTEGER
  nvmGcmUnitPriLinkFailMonThrshld INTEGER

NvmGcmBackupCfgEntry  
SEQUENCE    
  nvmGcmBackupCfgIndex INTEGER
  nvmGcmBackupCfgUnitIndex INTEGER
  nvmGcmBackupCfgLinkIndex INTEGER
  nvmGcmBackupCfgLinkRowStatus INTEGER

NvmGcmTimerEntry  
SEQUENCE    
  nvmGcmTimerIndex INTEGER
  nvmGcmTimerUnitIndex INTEGER
  nvmGcmTimerInactStartHr INTEGER
  nvmGcmTimerInactStartMin INTEGER
  nvmGcmTimerInactDurationHr INTEGER
  nvmGcmTimerInactDurationMin INTEGER
  nvmGcmTimerInactMonday INTEGER
  nvmGcmTimerInactTuesday INTEGER
  nvmGcmTimerInactWednesday INTEGER
  nvmGcmTimerInactThursday INTEGER
  nvmGcmTimerInactFriday INTEGER
  nvmGcmTimerInactSaturday INTEGER
  nvmGcmTimerInactSunday INTEGER
  nvmGcmTimerInactPeriodic INTEGER
  nvmGcmTimerRowStatus INTEGER

McmGcmHwStatusEntry  
SEQUENCE    
  mcmGcmHwStatusIndex INTEGER
  mcmGcmHwStatusDesc DisplayString
  mcmGcmHwStatusOperStatus INTEGER
  mcmGcmHwStatusActiveLink INTEGER

Defined Values

micom-gcm 1.3.6.1.4.1.335.1.4.25
OBJECT IDENTIFIER    

configuration 1.3.6.1.4.1.335.1.4.25.1
OBJECT IDENTIFIER    

status 1.3.6.1.4.1.335.1.4.25.2
OBJECT IDENTIFIER    

mcmGcmGlobalCfgGroup 1.3.6.1.4.1.335.1.4.25.1.1
OBJECT IDENTIFIER    

mcmGcmGlobalCfgAdminStatus 1.3.6.1.4.1.335.1.4.25.1.1.1
NAME = ; DESC = The GCM admin status: \ 1 - GCM is enabled. \ 2 - GCM is disabled. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmGlobalCfgTraps 1.3.6.1.4.1.335.1.4.25.1.1.2
NAME = ; DESC = This object indicates whether GCM traps will \ be generated or not. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmGlobalCfgAutoActSelMode 1.3.6.1.4.1.335.1.4.25.1.1.3
NAME = ; DESC = This object is used to set the mode of the unit \ activation after reading the configuration file. \ disabled (2): The GCM does not change the objects \ mcmGcmUnitAdminStatus in the GCM Unit \ table after reading the configuration file. \ hwCfgAutoSelect (1): After reading the configuration \ file, the GCM activates only one of the three GCM \ Units depending on the hardware configuration. \ The stored configuration for the object \ mcmGcmUnitAdminStatus will be ignored. \ The following association between the GCM Unit \ rows and hardware configuration exists: \ Row 1: Port 2 and (optional) 3 with Serial WAN \ card; Port 2 is the Primary port. \ Row 2: Port 2 with Serial WAN card, Port 3 with \ ISDN card, Port 2 is the Primary port. \ Row 3: Port 2 and (optional) 3 with ISDN, Port 2 \ is the Primary port. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hwCfgAutoSelect(1), disabled(2)  

mcmGcmLinkTable 1.3.6.1.4.1.335.1.4.25.1.2
NAME = ; DESC = The GCM Link Table. (Operational) ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmGcmLinkEntry

mcmGcmLinkEntry 1.3.6.1.4.1.335.1.4.25.1.2.1
NAME = ; DESC = An entry in the GCM Link Table. \ (Operational) ; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmGcmLinkEntry  

mcmGcmLinkIndex 1.3.6.1.4.1.335.1.4.25.1.2.1.1
NAME = ; DESC = The index value which uniquely identifies an \ entry in the GCM Link Table. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmLinkUnitIndex 1.3.6.1.4.1.335.1.4.25.1.2.1.2
NAME = ; DESC = The index value that uniquely identifies an \ entry in the GCM Unit Table. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

mcmGcmLinkName 1.3.6.1.4.1.335.1.4.25.1.2.1.3
NAME = ; DESC = The name of the GCM Link. Default value is \ 'gcmLink'. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

mcmGcmLinkSigType 1.3.6.1.4.1.335.1.4.25.1.2.1.4
NAME = ; DESC = The type of the signaling channel, if a signaling \ protocol is used. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER reserved(1), isdn(2), unusedEver-up(3)  

mcmGcmLinkSigPcmIndex 1.3.6.1.4.1.335.1.4.25.1.2.1.5
NAME = ; DESC = The index value that uniquely identifies an entry \ for the PCM. In the case of the ICM, this entry \ represents an index for the dialCtlPeerCfgTable. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

mcmGcmLinkSigOperStatus 1.3.6.1.4.1.335.1.4.25.1.2.1.6
NAME = ; DESC = The status of the Signaling Link: \ cfg-error (1): Configuration error. The signaling \ link is not configured or activated from the \ Signaling CM. \ info-wait (2): the GCM has sent an information \ request message to the Signaling CM to request \ the status of this link. If the GCM receives an error \ message, the status will be set to cfg-error (1). \ inactive (3): the link is inactive. \ enable-wait (4): the GCM is trying to enable the \ hardware interface and is waiting for the response \ from the Signaling CM. \ deferred(5):the activation of link is being deferred \ for 1 minute. protocol-down(6):this indicates PLM or MSM is down.\ activating (7): the activation of this link is in \ progress. \ active (8): the Signaling link is established. \ disconnecting (9): the Signaling CM deactivates \ this link. \ up (10): this link is up forever.; (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cfg-error(1), info-wait(2), inactive(3), enable-wait(4), deferred(5), protocol-down(6), activating(7), active(8), disconnecting(9), ever-up(10)  

mcmGcmLinkProtoType 1.3.6.1.4.1.335.1.4.25.1.2.1.7
NAME = ; DESC = The type of the protocol. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER reserved(1), frameRelay(2)  

mcmGcmLinkProtoPcmIndex 1.3.6.1.4.1.335.1.4.25.1.2.1.8
NAME = ; DESC = The index value that uniquely identifies an entry \ for the PCM. In the case of the FRCM, this entry \ represents an index for the port. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

mcmGcmLinkProtoStatus 1.3.6.1.4.1.335.1.4.25.1.2.1.9
NAME = ; DESC = The status of the Protocol Link: \ cfg-error (1): Configuration error. The protocol \ link is not configured or activated from the CM. \ info-wait (2): the GCM has sent an information \ request message to the CM to request the status \ of this link. If the GCM receives an error message, \ the status will be set to cfg-error (1). \ inactive (3): the link is inactive. \ enable-wait (4): the GCM is trying to enable the \ hardware interface and is waiting for the response \ from the CM. \ deferred(5):the activation of link is being deferred for 1 \ minute. \ protocol-down(6):this indicates PLM or MSM is down.\ activating (7): the activation of this link is in progress. \ wait-switch (8): the switching from the backup link \ to the primary is delayed by the configuration. \ switching (9): the switching of the link is in progress. \ active (10): the link is established. \ disconnecting (11): the CM deactivates this link. \ up (12): this link is up forever. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cfg-error(1), info-wait(2), inactive(3), enable-wait(4), deferred(5), protocol-down(6), activating(7), wait-switch(8), switching(9), active(10), disconnecting(11), ever-up(12)  

mcmGcmLinkVoiceCalls 1.3.6.1.4.1.335.1.4.25.1.2.1.10
NAME = ; DESC = The number of active voice calls. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mcmGcmUnitTable 1.3.6.1.4.1.335.1.4.25.1.3
NAME = ; DESC = The GCM Unit Table. (Operational) ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmGcmUnitEntry

mcmGcmUnitEntry 1.3.6.1.4.1.335.1.4.25.1.3.1
NAME = ; DESC = An entry in the GCM Unit Table. \ (Operational) ; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmGcmUnitEntry  

mcmGcmUnitIndex 1.3.6.1.4.1.335.1.4.25.1.3.1.1
NAME = ; DESC = The index value which uniquely identifies an \ entry in the GCM Unit Table. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

mcmGcmUnitName 1.3.6.1.4.1.335.1.4.25.1.3.1.2
NAME = ; DESC = The name of the GCM Unit. Default value is \ 'gcmUnit '. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..15)  

mcmGcmUnitAdminStatus 1.3.6.1.4.1.335.1.4.25.1.3.1.3
NAME = ; DESC = The value shows the administration status of \ the GCM Unit. If the status is set to down (1), \ the administration is disabled for this unit and \ all associated links. Only when the status is \ up (2), the GCM controls and administrates this \ unit. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

mcmGcmUnitTimerAdminStatus 1.3.6.1.4.1.335.1.4.25.1.3.1.4
NAME = ; DESC = The GCM Unit timer status. When set to enabled (1), \ the GCM checks the configured timer entries. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmUnitSwitchType 1.3.6.1.4.1.335.1.4.25.1.3.1.5
NAME = ; DESC = The type of the switching algorithm. \ fast-switch (1): the GCM deactivates the backup \ link after the primary link is re-established \ regardless of the backup transmission activity. \ voice-switch (2): the backup link will be deactivated \ after the primary link is re-established and all voice \ calls over the backup link are disconnected. \ manual-switch-backup(3): the GCM switches to the \ backup in case of the primary failure. The switching \ back to the primary port mst be done manually.\ manual-switch(4): the GCM could be manually switch \ only.\ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fast-switch(1), voice-switch(2), manual-switch-backup(3), manual-switching(4)  

mcmGcmUnitSwitchDelay 1.3.6.1.4.1.335.1.4.25.1.3.1.6
NAME = ; DESC = NOTE THAT THIS OBJECT IS DEPRECATED. It's \ functionality has been replaced by \ mcmGcmUnitBackupSwitchDelay object. \ The number of minutes that the switching from \ the active backup link to the active primary link \ has to be delayed. (Operational); HELP = ; CAPABILITIES = ;
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mcmGcmUnitPrimaryLinkIndex 1.3.6.1.4.1.335.1.4.25.1.3.1.7
NAME = ; DESC = The index value that uniquely identifies an entry \ in the GCM Link Table as the primary link. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmUnitBackupRemainTime 1.3.6.1.4.1.335.1.4.25.1.3.1.8
NAME = ; DESC = The maximum number of minutes that the backup link \ remains active after the switching from the backup \ to the primary. This object will be used if the \ object mcmGcmUnitSwitchType is set to \ voice-switch (2). (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mcmGcmUnitBackupSwitchDelay 1.3.6.1.4.1.335.1.4.25.1.3.1.9
NAME = ; DESC = The number of minutes the switching \ has to be delayed before switching \ to the primary link.(Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mcmGcmUnitPrimarySwitchDelay 1.3.6.1.4.1.335.1.4.25.1.3.1.10
NAME = ; DESC = The number of minutes the switching has \ to be delayed before switching to the \ backup link. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mcmGcmUnitRegionalLinkIndex 1.3.6.1.4.1.335.1.4.25.1.3.1.11
NAME = ; DESC = The index value that uniquely identifies an entry \ in the GCM Link Table as the regional link index. \ This GCM link is activated only during the down \ time of the backup link. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmUnitModeCfg 1.3.6.1.4.1.335.1.4.25.1.3.1.12
NAME = ; DESC = branch-node(1): The GCM will try to \ to activate at first the primary \ link. In the case of a failure, \ the GCM will activate one of the \ the backup links. During the time \ the primary link is active, the \ backup port is deactivated. regional-node(2): This mode is \ identical to the branch-mode(1) \ except the backup link is not used.\ When the primary link is active, the \ GCM will not deactivate the backup \ port. If the backup port is an \ ISDN card, the GCM can be configured \ to allow incoming calls by using the \ link specified by the object \ . When the primary link fails, the activated \ link \ (eg. configured for incoming connection \ ISDN) will be disconnected and the \ backup link will be activated. \ Note that there is no deactivation \ of the backup port and ISDN incomming \ calls can be accepted when the backup \ is not used for backing up the primary \ connection.\ central-site-node(3):Will not have a MPANL DTE connection. There is no \ need to have the backup functionality. \ The GCM will enable both ports. \ In the case of ISDN, it is possible \ to accept incomming calls. Primary link \ and backup link will have the same \ priority, there is no correlation \ between them. The GCM will activate \ all GCM links configured for this unit. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER branch-node(1), regional-node(2), central-site-node(3)  

mcmGcmUnitPriLinkFailMonStatus 1.3.6.1.4.1.335.1.4.25.1.3.1.13
NAME = ; DESC = The GCM link failure monitor \ status. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmUnitPriLinkFailMonDurMin 1.3.6.1.4.1.335.1.4.25.1.3.1.14
NAME = ; DESC = The number of minutes to monitor \ gcmLinkFailureMonitorThreshold(below)\ activity. The duration timer \ starts when first link failure \ occured while the \ gcmLinkFailureMonStatus(above) is \ enabled(1). \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmUnitPriLinkFailMonThrshld 1.3.6.1.4.1.335.1.4.25.1.3.1.15
NAME = ; DESC = The maximum number of \ gcmLinkFailureMonCount(below) \ within gcmLinkFailureMonDurMin \ (above)before switching from primary \ to backup.\ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmUnitPriLinkFailMonCount 1.3.6.1.4.1.335.1.4.25.1.3.1.16
NAME = ; DESC = The number of link failures within \ gcmLinkFailureMonitorDurMin(above). \ HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmUnitCmd 1.3.6.1.4.1.335.1.4.25.1.3.1.17
NAME = ; DESC = Switches the units link from primary to \ backup (1) or backup to primary (2) \ HELP = ; CAPABILITIES = ;
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER switch-to-primary(1), switch-to-backup(2)  

mcmGcmBackupCfgTable 1.3.6.1.4.1.335.1.4.25.1.4
NAME = ; DESC = The GCM Backup Configuration Table. \ (Operational) ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmGcmBackupCfgEntry

mcmGcmBackupCfgEntry 1.3.6.1.4.1.335.1.4.25.1.4.1
NAME = ; DESC = An entry in the GCM Backup Configuration \ Table. (Operational) ; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmGcmBackupCfgEntry  

mcmGcmBackupCfgIndex 1.3.6.1.4.1.335.1.4.25.1.4.1.1
NAME = ; DESC = The index value which uniquely identifies an \ entry in the GCM Backup Configuration Table. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmBackupCfgUnitIndex 1.3.6.1.4.1.335.1.4.25.1.4.1.2
NAME = ; DESC = The index value that uniquely identifies an \ entry in the GCM Unit Table. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

mcmGcmBackupCfgLinkIndex 1.3.6.1.4.1.335.1.4.25.1.4.1.3
NAME = ; DESC = The index value that uniquely identifies an \ entry in the GCM Link Table. This GCM Link \ will be used for Backup Link activation. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmTimerTable 1.3.6.1.4.1.335.1.4.25.1.5
NAME = ; DESC = The GCM Timer Table. (Operational) ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmGcmTimerEntry

mcmGcmTimerEntry 1.3.6.1.4.1.335.1.4.25.1.5.1
NAME = ; DESC = An entry in the GCM Timer Table. \ (Operational) ; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmGcmTimerEntry  

mcmGcmTimerIndex 1.3.6.1.4.1.335.1.4.25.1.5.1.1
NAME = ; DESC = The index value which uniquely identifies an \ entry in the GCM Timer Table. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

mcmGcmTimerUnitIndex 1.3.6.1.4.1.335.1.4.25.1.5.1.2
NAME = ; DESC = The index value that uniquely identifies an \ entry into the GCM Unit Table. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

mcmGcmTimerInactStartHr 1.3.6.1.4.1.335.1.4.25.1.5.1.3
NAME = ; DESC = The hours designation to start inactivity. The \ connection will be automatically disconnected \ if the system time is equal to the \ mcmGcmTimerInactStartHr/Min. \ Similarly, if the Inactivity Timer is configured \ as a periodic timer (mcmGcmTimerInactPeriodic), \ this object designates the hour to start inactivity.\ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..23  

mcmGcmTimerInactStartMin 1.3.6.1.4.1.335.1.4.25.1.5.1.4
NAME = ; DESC = The minutes designation to start inactivity. The \ connection will be automatically disconnected \ if the system time is equal to the \ mcmGcmTimerInactStartHr/Min. \ If the Inactivity Timer is configured as a periodic \ timer (mcmGcmTimerInactPeriodic), this object \ designates the minute to start inactivity. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..59  

mcmGcmTimerInactDurationHr 1.3.6.1.4.1.335.1.4.25.1.5.1.5
NAME = ; DESC = The hours designation for inactivity duration. \ The inactivity time duration of the GCM Unit is \ defined by mcmGcmTimerInactDurationHr/Min. \ Similarly, if the Inactivity Timer is configured as \ a periodic timer (mcmGcmTimerInactPeriodic), \ this object designates the inactive connection \ duration (hours) period. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..167  

mcmGcmTimerInactDurationMin 1.3.6.1.4.1.335.1.4.25.1.5.1.6
NAME = ; DESC = The minutes designation for inactivity duration. \ The inactivity time duration of the GCM Unit is \ defined by mcmGcmTimerInactDurationHr/Min. \ Similarly, if the Inactivity Timer is configured as \ a periodic timer (mcmGcmTimerInactPeriodic), \ this object designates the inactive connection \ duration (minutes) period. (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..59  

mcmGcmTimerInactMonday 1.3.6.1.4.1.335.1.4.25.1.5.1.7
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Monday. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmTimerInactTuesday 1.3.6.1.4.1.335.1.4.25.1.5.1.8
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Tuesday. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmTimerInactWednesday 1.3.6.1.4.1.335.1.4.25.1.5.1.9
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Wednesday. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmTimerInactThursday 1.3.6.1.4.1.335.1.4.25.1.5.1.10
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Thursday. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmTimerInactFriday 1.3.6.1.4.1.335.1.4.25.1.5.1.11
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Friday. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmTimerInactSaturday 1.3.6.1.4.1.335.1.4.25.1.5.1.12
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Saturday. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmTimerInactSunday 1.3.6.1.4.1.335.1.4.25.1.5.1.13
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Sunday. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mcmGcmTimerInactPeriodic 1.3.6.1.4.1.335.1.4.25.1.5.1.14
NAME = ; DESC = Enables (1) or disables (2) the Periodic Timer \ inactivity administration functionality. \ (Operational); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmGlobalCfgGroup 1.3.6.1.4.1.335.1.4.25.1.6
OBJECT IDENTIFIER    

nvmGcmGlobalCfgAdminStatus 1.3.6.1.4.1.335.1.4.25.1.6.1
NAME = ; DESC = The GCM admin status: \ 1 - GCM is enabled. \ 2 - GCM is disabled. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmGlobalCfgTraps 1.3.6.1.4.1.335.1.4.25.1.6.2
NAME = ; DESC = This object indicates whether GCM traps will \ be generated or not. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmGlobalCfgAutoActSelMode 1.3.6.1.4.1.335.1.4.25.1.6.3
NAME = ; DESC = This object is used to set the mode of the unit \ activation after reading the configuration file. \ disabled (2): The GCM does not change the objects \ nvmGcmUnitAdminStatus in the GCM Unit \ table after reading the configuration file. \ hwCfgAutoSelect (1): After reading the configuration \ file, the GCM activates only one of the three GCM \ Units depending on the hardware configuration. \ The stored configuration for the object \ nvmGcmUnitAdminStatus will be ignored. \ The following association between the GCM Unit \ rows and hardware configuration exists: \ Row 1: Port 2 and (optional) 3 with Serial WAN \ card; Port 2 is the Primary port. \ Row 2: Port 2 with Serial WAN card, Port 3 with \ ISDN card, Port 2 is the Primary port. \ Row 3: Port 2 and (optional) 3 with ISDN, Port 2 \ is the Primary port. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hwCfgAutoSelect(1), disabled(2)  

nvmGcmLinkTable 1.3.6.1.4.1.335.1.4.25.1.7
NAME = ; DESC = The GCM Link Table. (Configuration) ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmGcmLinkEntry

nvmGcmLinkEntry 1.3.6.1.4.1.335.1.4.25.1.7.1
NAME = ; DESC = An entry in the GCM Link Table. \ (Configuration) ; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmGcmLinkEntry  

nvmGcmLinkIndex 1.3.6.1.4.1.335.1.4.25.1.7.1.1
NAME = ; DESC = The index value which uniquely identifies an \ entry in the GCM Link Table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

nvmGcmLinkUnitIndex 1.3.6.1.4.1.335.1.4.25.1.7.1.2
NAME = ; DESC = The index value that uniquely identifies an \ entry in the GCM Unit Table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

nvmGcmLinkName 1.3.6.1.4.1.335.1.4.25.1.7.1.3
NAME = ; DESC = The name of the GCM Link. Default value is \ 'gcmLink'. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

nvmGcmLinkSigType 1.3.6.1.4.1.335.1.4.25.1.7.1.4
NAME = ; DESC = The type of the signaling channel, if a signaling \ protocol is used. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reserved(1), isdn(2), unusedEver-up(3)  

nvmGcmLinkSigPcmIndex 1.3.6.1.4.1.335.1.4.25.1.7.1.5
NAME = ; DESC = The index value that uniquely identifies an entry \ for the PCM. In the case of the ICM, this entry \ represents an index for the dialCtlPeerCfgTable. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

nvmGcmLinkProtoType 1.3.6.1.4.1.335.1.4.25.1.7.1.6
NAME = ; DESC = The type of the protocol. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reserved(1), frameRelay(2)  

nvmGcmLinkProtoPcmIndex 1.3.6.1.4.1.335.1.4.25.1.7.1.7
NAME = ; DESC = The index value that uniquely identifies an entry \ for the PCM. In the case of the FRCM, this entry \ represents an index for a port. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

nvmGcmLinkRowStatus 1.3.6.1.4.1.335.1.4.25.1.7.1.8
NAME = ; DESC = This object is used to create and delete rows in the \ GCM Link Table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), delete(2), active(3)  

nvmGcmUnitTable 1.3.6.1.4.1.335.1.4.25.1.8
NAME = ; DESC = The GCM Unit Table. (Configuration) ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmGcmUnitEntry

nvmGcmUnitEntry 1.3.6.1.4.1.335.1.4.25.1.8.1
NAME = ; DESC = An entry in the GCM Unit Table. \ (Configuration) ; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmGcmUnitEntry  

nvmGcmUnitIndex 1.3.6.1.4.1.335.1.4.25.1.8.1.1
NAME = ; DESC = The index value which uniquely identifies an \ entry in the GCM Unit Table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

nvmGcmUnitName 1.3.6.1.4.1.335.1.4.25.1.8.1.2
NAME = ; DESC = The name of the GCM Unit. Default value is \ 'gcmUnit '. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..15)  

nvmGcmUnitAdminStatus 1.3.6.1.4.1.335.1.4.25.1.8.1.3
NAME = ; DESC = The value shows the administration status of \ the GCM Unit. If the status is set to down (1), \ the administration is disabled for this unit and \ all associated links. Only when the status is \ up (2), the GCM controls and administrates this \ unit. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvmGcmUnitTimerAdminStatus 1.3.6.1.4.1.335.1.4.25.1.8.1.4
NAME = ; DESC = The GCM Unit timer status. When set to enabled (1), \ the GCM checks the configured timer entries. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmUnitSwitchType 1.3.6.1.4.1.335.1.4.25.1.8.1.5
NAME = ; DESC = The type of the switching algorithm. \ fast-switch (1): the GCM deactivates the backup \ link after the primary link is re-established \ regardless of the backup transmission activity. \ voice-switch (2): the backup link will be deactivated \ after the primary link is re-established and all voice \ calls over the backup link are disconnected. \ calls over the backup link are disconnected. \ manual-switch-backup(3): the GCM switches to the \ backup in case of the primary failure. The switching \ back to the primary port mst be done manually.\ manual-switch(4): the GCM could be manually switch \ only.\ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fast-switch(1), voice-switch(2), manual-switch-backup(3), manual-switching(4)  

nvmGcmUnitSwitchDelay 1.3.6.1.4.1.335.1.4.25.1.8.1.6
NAME = ; DESC = NOTE THAT THIS OBJECT IS DEPRECATED. It's \ functionality has been replaced by \ nmvGcmUnitBackupSwitchDelay object. \ The number of minutes that the switching from \ the active backup link to the active primary link \ has to be delayed. (Operational); HELP = ; CAPABILITIES = ;
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvmGcmUnitPrimaryLinkIndex 1.3.6.1.4.1.335.1.4.25.1.8.1.7
NAME = ; DESC = The index value that uniquely identifies an entry \ in the GCM Link Table as the primary link. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvmGcmUnitBackupRemainTime 1.3.6.1.4.1.335.1.4.25.1.8.1.8
NAME = ; DESC = The maximum number of minutes that the backup link \ remains active after the switching from the backup \ to the primary. This object will be used if the \ object mcmGcmUnitSwitchType is set to \ voice-switch (2). (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvmGcmUnitBackupSwitchDelay 1.3.6.1.4.1.335.1.4.25.1.8.1.9
NAME = ; DESC = The number of minutes the switching \ has to be delayed before switching \ to the primary link.(Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvmGcmUnitPrimarySwitchDelay 1.3.6.1.4.1.335.1.4.25.1.8.1.10
NAME = ; DESC = The number of minutes the switching has \ to be delayed before switching to the \ backup link. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvmGcmUnitRegionalLinkIndex 1.3.6.1.4.1.335.1.4.25.1.8.1.11
NAME = ; DESC = The index value that uniquely identifies an entry \ in the GCM Link Table as the regional link index. \ This GCM link is activated only during the down \ time of the backup link.\ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvmGcmUnitModeCfg 1.3.6.1.4.1.335.1.4.25.1.8.1.12
NAME = ; DESC = branch-node(1): The GCM will try to \ to activate at first the primary \ link. In the case of a failure, \ the GCM will activate one of the \ the backup links. During the time \ the primary link is active, the \ backup port is deactivated. regional-node(2): This mode is \ identical to the branch-mode(1) \ except the backup link is not used.\ When the primary link is active, the \ GCM will not deactivate the backup \ port. If the backup port is an \ ISDN card, the GCM can be configured \ to allow incoming calls by using the \ link specified by the object \ . When the primary link fails, the activated \ link \ (eg. configured for incoming connection \ ISDN) will be disconnected and the \ backup link will be activated. \ Note that there is no deactivation \ of the backup port and ISDN incomming \ calls can be accepted when the backup \ is not used for backing up the primary \ connection.\ central-site-node(3):Will not have a MPANL DTE connection. There is no \ need to have the backup functionality. \ The GCM will enable both ports. \ In the case of ISDN, it is possible \ to accept incomming calls. Primary link \ and backup link will have the same \ priority, there is no correlation \ between them. The GCM will activate \ all GCM links configured for this unit. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER branch-node(1), regional-node(2), central-site-node(3)  

nvmGcmUnitPriLinkFailMonStatus 1.3.6.1.4.1.335.1.4.25.1.8.1.13
NAME = ; DESC = The GCM link failure monitor \ status. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmUnitPriLinkFailMonDurMin 1.3.6.1.4.1.335.1.4.25.1.8.1.14
NAME = ; DESC = The number of minutes to monitor \ gcmLinkFailureMonThreshold \ activity. The duration timer \ starts when first link failure \ occured while the \ gcmLinkFailureMonStatus is \ enabled(1). \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvmGcmUnitPriLinkFailMonThrshld 1.3.6.1.4.1.335.1.4.25.1.8.1.15
NAME = ; DESC = The maximum number of \ gcmLinkFailureMonCount(below) \ within gcmLinkFailureMonDurMin \ (above)before switching from primary \ to backup.\ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvmGcmBackupCfgTable 1.3.6.1.4.1.335.1.4.25.1.9
NAME = ; DESC = The GCM Backup Configuration Table. \ (Configuration) ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmGcmBackupCfgEntry

nvmGcmBackupCfgEntry 1.3.6.1.4.1.335.1.4.25.1.9.1
NAME = ; DESC = An entry in the GCM Backup Configuration \ Table. (Configuration) ; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmGcmBackupCfgEntry  

nvmGcmBackupCfgIndex 1.3.6.1.4.1.335.1.4.25.1.9.1.1
NAME = ; DESC = The index value which uniquely identifies an \ entry in the GCM Backup Configuration Table. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

nvmGcmBackupCfgUnitIndex 1.3.6.1.4.1.335.1.4.25.1.9.1.2
NAME = ; DESC = The index value that uniquely identifies an \ entry in the GCM Unit Table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

nvmGcmBackupCfgLinkIndex 1.3.6.1.4.1.335.1.4.25.1.9.1.3
NAME = ; DESC = The index value that uniquely identifies an \ entry in the GCM Link Table. This GCM Link \ will be used for Backup Link activation. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvmGcmBackupCfgLinkRowStatus 1.3.6.1.4.1.335.1.4.25.1.9.1.4
NAME = ; DESC = This object is used to create and delete rows \ in the GCM Backup Configuration Table. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), delete(2), active(3)  

nvmGcmTimerTable 1.3.6.1.4.1.335.1.4.25.1.10
NAME = ; DESC = The GCM Timer Table. (Configuration) ; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmGcmTimerEntry

nvmGcmTimerEntry 1.3.6.1.4.1.335.1.4.25.1.10.1
NAME = ; DESC = An entry in the GCM Timer Table. \ (Configuration) ; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmGcmTimerEntry  

nvmGcmTimerIndex 1.3.6.1.4.1.335.1.4.25.1.10.1.1
NAME = ; DESC = The index value which uniquely identifies an \ entry in the GCM Timer Table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

nvmGcmTimerUnitIndex 1.3.6.1.4.1.335.1.4.25.1.10.1.2
NAME = ; DESC = The index value that uniquely identifies an \ entry into the GCM Unit Table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

nvmGcmTimerInactStartHr 1.3.6.1.4.1.335.1.4.25.1.10.1.3
NAME = ; DESC = The hours designation to start inactivity. The \ connection will be automatically disconnected \ if the system time is equal to the \ nvmGcmTimerInactStartHr/Min. \ Similarly, if the Inactivity Timer is configured \ as a periodic timer (nvmGcmTimerInactPeriodic), \ this object designates the hour to start inactivity. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

nvmGcmTimerInactStartMin 1.3.6.1.4.1.335.1.4.25.1.10.1.4
NAME = ; DESC = The minutes designation to start inactivity. The \ connection will be automatically disconnected \ if the system time is equal to the \ nvmGcmTimerInactStartHr/Min. \ Similarly, if the Inactivity Timer is configured \ as a periodic timer (nvmGcmTimerInactPeriodic), \ this object designates the minute to start inactivity.\ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

nvmGcmTimerInactDurationHr 1.3.6.1.4.1.335.1.4.25.1.10.1.5
NAME = ; DESC = The hours designation for inactivity duration. \ The inactivity time duration of the GCM Unit is \ defined by nvmGcmTimerInactDurationHr/Min. \ Similarly, if the Inactivity Timer is configured as \ a periodic timer (nvmGcmTimerInactPeriodic), \ this object designates the inactive connection \ duration (hours) period. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..167  

nvmGcmTimerInactDurationMin 1.3.6.1.4.1.335.1.4.25.1.10.1.6
NAME = ; DESC = The minutes designation for inactivity duration. \ The inactivity time duration of the GCM Unit is \ defined by nvmGcmTimerInactDurationHr/Min. \ Similarly, if the Inactivity Timer is configured as \ a periodic timer (nvmGcmTimerInactPeriodic), \ this object designates the inactive connection \ duration (minutes) period. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

nvmGcmTimerInactMonday 1.3.6.1.4.1.335.1.4.25.1.10.1.7
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Monday. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmTimerInactTuesday 1.3.6.1.4.1.335.1.4.25.1.10.1.8
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Tuesday. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmTimerInactWednesday 1.3.6.1.4.1.335.1.4.25.1.10.1.9
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Wednesday. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmTimerInactThursday 1.3.6.1.4.1.335.1.4.25.1.10.1.10
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Thursday. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmTimerInactFriday 1.3.6.1.4.1.335.1.4.25.1.10.1.11
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Friday. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmTimerInactSaturday 1.3.6.1.4.1.335.1.4.25.1.10.1.12
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Saturday. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmTimerInactSunday 1.3.6.1.4.1.335.1.4.25.1.10.1.13
NAME = ; DESC = Enables (1) or disables (2) the timer inactivity \ administration for the day Sunday. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmTimerInactPeriodic 1.3.6.1.4.1.335.1.4.25.1.10.1.14
NAME = ; DESC = Enables (1) or disables (2) the Periodic Timer \ inactivity administration functionality. \ (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvmGcmTimerRowStatus 1.3.6.1.4.1.335.1.4.25.1.10.1.15
NAME = ; DESC = This object is used to create and delete rows \ in the GCM Timer Table. (Configuration); HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), delete(2), active(3)  

mcmGcmHwStatusTable 1.3.6.1.4.1.335.1.4.25.2.1
NAME = ; DESC = The GCM Hardware Status Table.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    McmGcmHwStatusEntry

mcmGcmHwStatusEntry 1.3.6.1.4.1.335.1.4.25.2.1.1
NAME = ; DESC = An entry in the GCM Hardware Status \ Table.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  McmGcmHwStatusEntry  

mcmGcmHwStatusIndex 1.3.6.1.4.1.335.1.4.25.2.1.1.1
NAME = ; DESC = The index value that uniquely identifies an entry \ in the GCM Hardware Status table. The first two \ entries are internal ports. Entry 1 describes a port \ that is ever down. The second entry is an ever-up \ port. The GCM will not change the status of these \ two ports. They are not connected to any physical \ interface. To change the status of the other entries, \ the GCM communicates with associated PCM.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER everDown(1), everUp(2), isdnPrimary(3), isdnBackup(4), frPrimary(5), frBackup(6)  

mcmGcmHwStatusDesc 1.3.6.1.4.1.335.1.4.25.2.1.1.2
NAME = ; DESC = The name of the GCM Hardware Interface.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

mcmGcmHwStatusOperStatus 1.3.6.1.4.1.335.1.4.25.2.1.1.3
NAME = ; DESC = The status of the Hardware interface. After \ reset the normal status of an entry is down (4). \ To activate the hardware port, the GCM sends \ a message to the PCM and changes the status to \ enable-req(5). A positive activation changes the \ status to up(2). If the activation fails (e.g., no \ cable is plugged in), the status will be set to \ link-error(7). Only in this state, the PCM monitors \ the status of the port. In the state down(4), the \ PCM does not monitor the port status.; HELP = ; CAPABILITIES = ;
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ever-down(1), up(2), ever-up(3), down(4), enable-req(5), disable-req(6), link-error(7)  


mcmGCMPriLinkDownCausedByPhysicalConnection 1
NAME = ; DESC = This trap will be generated from the GCM,\ if a GCM Link changes the state from UP to \ DOWN. The GCM Link is configured as primary \ link. The disconnection is caused by the loss\ of the physical connection.\ Severity Level: CRITICAL ; HELP = Loss of primary link Physical conenction. Check \ the cabling. Possible signalling problem with ISDN \ D-channel, or Frame Relay protocol error.\ If problem persists, please contact Sys Admin., or \ Field Personnel.;
TRAP-TYPE    

mcmGCMPriLinkDownCausedByProtocolFailure 2
NAME = ; DESC = This trap will be generated from the GCM,\ if a GCM Link changes the state from UP to \ DOWN. The GCM Link is configured as primary \ link. The disconnection is caused by the loss\ of the protocol connection.\ Severity Level: CRITICAL ; HELP = Possible Frame Relay Protocol error. If problem \ persist, contact System admin. or Field Personnel.;
TRAP-TYPE    

mcmGcmPriLinkDownCausedByGcmTimerEvent 3
NAME = ; DESC = This trap will be generated from the GCM,\ if a GCM Link changes the state from UP to \ DOWN. The GCM Link is configured as primary \ link. The disconnection is caused by a \ GCM Timer event.\ Severity Level: CRITICAL ; HELP = GCM Timer event (user activated) caused the Link \ to go down. Please wait until the timer kicks in. If it \ stays down, contact your Field Personnel.;
TRAP-TYPE    

mcmGcmPriLinkDownCausedByUnknownSource 4
NAME = ; DESC = This trap will be generated from the GCM,\ if a GCM Link changes the state from UP to \ DOWN. The GCM Link is configured as primary \ link. The disconnection is caused by the loss\ of an unkown event.\ Severity Level: CRITICAL ; HELP = Caused by unknown event . If Link does not come \ back up, Please consult Field Personnel.;
TRAP-TYPE    

mcmGCMBakLinkDownCausedByPhysicalConnection 5
NAME = ; DESC = This trap will be generated from the GCM,\ if a GCM Link changes the state from UP to \ DOWN. The GCM Link is configured as backup \ link. The disconnection is caused by the loss\ of the physical connection.\ Severity Level: CRITICAL ; HELP = Loss of Backup link Physical conenction. Check \ the cabling. Possible signalling problem with ISDN \ D-channel, or Frame Relay protocol error.\ If problem persists, please contact Sys Admin., or \ Field Personnel.;
TRAP-TYPE    

mcmGCMBakLinkDownCausedByProtocolFailure 6
NAME = ; DESC = This trap will be generated from the GCM,\ if a GCM Link changes the state from UP to \ DOWN. The GCM Link is configured as backup \ link. The disconnection is caused by the loss\ of the protocol connection.\ Severity Level: CRITICAL ; HELP = Possible Frame Relay Protocol error. If problem \ persist, contact System admin. or Field Personnel.;
TRAP-TYPE    

mcmGcmBakLinkDownCausedByGcmTimerEvent 7
NAME = ; DESC = This trap will be generated from the GCM,\ if a GCM Link changes the state from UP to \ DOWN. The GCM Link is configured as backup \ link. The disconnection is caused by GCM \ timer event. \ Severity Level: CRITICAL ; HELP = GCM Timer event (user activated) caused the Link \ to go down. Please wait until the timer kicks in. If it \ stays down, contact your Field Personnel.;
TRAP-TYPE    

mcmGcmBakLinkDownCausedByUnknownSource 8
NAME = ; DESC = This trap will be generated from the GCM,\ if a GCM Link changes the state from UP to \ DOWN. The GCM Link is configured as backup \ link. The disconnection is caused by the loss\ of an unkown event. \ Severity Level: CRITICAL ; HELP = Caused by unknown event . If Link does not come \ back up, Please contact Field Personnel.;
TRAP-TYPE    

mcmGcmPriLinkEst 9
NAME = ServerUnreachable; DESC = The connection between the access device and the PP is \ established. The connection is is build on physical \ and protocol level. Voice and Lan transfer is disabled \ for the primary link.\ Severity Level: INFORMATIVE ; HELP = Normal physical and protocol level connection. But, \ Server is unreachable. Please check Server's status.;
TRAP-TYPE    

mcmGcmBakLinkEst 10
NAME = ServerUnreachable; DESC = The connection between the access device and the PP is \ established. The connection is is build on physical \ and protocol level. Voice and Lan transferis disabled \ for the backup link.;\ Severity Level: INFORMATIVE ; HELP = Normal physical and protocol level connection. But, \ Server is unreachable. Please check Server's status.;
TRAP-TYPE    

mcmGcmPriLinkUp 11
NAME = ; DESC = This trap indicates that the connection is established \ and voice and LAN transfer is now actviated for the \ primary link.\ Severity Level: INFORMATIVE ; HELP = Normal Status Indicator!.;
TRAP-TYPE    

mcmGcmBakLinkUp 12
NAME = ; DESC = This trap indicates that the connection is established \ and voice and LAN transfer is now actviated for the \ backup link.\ Severity Level: INFORMATIVE ; HELP = Normal Status Indicator!.;
TRAP-TYPE    

mcmGcmRegionalLinkEst 13
NAME = ; DESC = This trap indicates that the connection is established \ for the regional GCM link. \ Severity Level: INFORMATIVE ; HELP = Normal Status Indicator!.;
TRAP-TYPE    

mcmGcmRegionalLinkDown 14
NAME = ; DESC = This trap indicates that the connection is deactivated \ for the regional GCM link because of a primary link \ failure or the disconnection by the remote peer. \ Severity Level: INFORMATIVE ; HELP = Normal Status Indicator!.;
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor