MERU-WLAN-MIB
File:
MERU-WLAN-MIB.mib (29204 bytes)
Imported modules
Imported symbols
Defined Types
| ActionStatus |
|
| Tok_String |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
actionStatusStart(1), actionStatusStop(2), actionStatusInProgress(3), actionStatusInError(4), actionStatusDone(5) |
|
| UpgradeState |
|
| Tok_String |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
upgradeStateStart(1), upgradeStateInProgress(2), upgradeStateFailed(3), upgradeStateDone(4) |
|
Defined Values
| meruWlanMibModule |
1.3.6.1.4.1.15983.1.1.1 |
| This MIB defines the traps from Meru WLAN infrastructure. |
| MODULE-IDENTITY |
|
|
|
| meru |
1.3.6.1.4.1.15983 |
| OID assigned by the IANA. All Meru MIBs are located under this subtree. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| meru-reg |
1.3.6.1.4.1.15983.1 |
| OBJECT IDENTIFIER |
|
|
|
| meru-wlan |
1.3.6.1.4.1.15983.1.1 |
| Tok_String |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| meru-caps |
1.3.6.1.4.1.15983.4 |
| OBJECT IDENTIFIER |
|
|
|
| meru-expr |
1.3.6.1.4.1.15983.6 |
| OBJECT IDENTIFIER |
|
|
|
| mwlGlobalReboot |
1.3.6.1.4.1.15983.3.1.2.1.6 |
| Setting this variable with the value 'start' triggers the
reboot of all the node in the WLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
ActionStatus |
|
|
| mwlTrapContent |
1.3.6.1.4.1.15983.3.1.2.1.14 |
| This object describes the details of a trap. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| mwlGlobalSave |
1.3.6.1.4.1.15983.3.1.2.1.16 |
| Setting this variable with the value 'start' triggers the save of
the running configuration to the startup configuration, so that
changes will persist across reboots. All changes made via SETs for
SNMP tables are applied to the running configuration only. You
should set this variable at the end of every group of updates
if you want your configuration to persist. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
ActionStatus |
|
|
| mwlTopoStaAtsAdd |
1.3.6.1.4.1.15983.3.1.3.7 |
| A mwlTopoStaAtsAdd trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that a station entry
has been added to the station and AP topology table.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlTopoStaAtsRemove |
1.3.6.1.4.1.15983.3.1.3.8 |
| A mwlTopoStaAtsAdd trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that a station entry
has been removed from the station and AP topology table.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlTopoStaAtsModify |
1.3.6.1.4.1.15983.3.1.3.9 |
| A mwlTopoStaAtsAdd trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that a station entry
has been modified in the station and AP topology table.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlRogueApDetected |
1.3.6.1.4.1.15983.3.1.3.13 |
| A mwlRogueApDetected trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that a rogue AP is
detected in the wireless network.
The AP id, mac address, and other information are described
in mwlTraContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlRogueApRemoved |
1.3.6.1.4.1.15983.3.1.3.14 |
| A mwlRogueApDetected trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that a rogue AP is
removed from the wireless network.
The AP id, mac address, and other information are described
in mwlTraContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAtsDown |
1.3.6.1.4.1.15983.3.1.3.18 |
| A mwlAtsDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that one of the
AP (Ats) in the wireless network is to enter down state.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAtsUp |
1.3.6.1.4.1.15983.3.1.3.19 |
| A mwlAtsUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that one of the
AP (Ats) in the wireless network is to enter up state.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlWatchdogFailure |
1.3.6.1.4.1.15983.3.1.3.22 |
| A mwlWatchdogFailure trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that WatchDog is down
in the controller.
The controller is identified by mwWncVarsHostName and the
details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlWatchdogUp |
1.3.6.1.4.1.15983.3.1.3.23 |
| A mwlWatchdogUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that WatchDog is up
in the controller.
The controller is identified by mwWncVarsHostName and the
details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlCertificateError |
1.3.6.1.4.1.15983.3.1.3.24 |
| A mwlCertificateError trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that a SSL
certificate is corrupted or expired.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlCertificateInstalled |
1.3.6.1.4.1.15983.3.1.3.25 |
| A mwlCertificateInstalled trap signifies that the SNMPv2
entity acting in an agent role, has detected that a SSL
certificate is installed.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApSoftwareVersionMismatch |
1.3.6.1.4.1.15983.3.1.3.26 |
| A mwlApSoftwareVersionMismatch trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that the software version in AP (Ats) does not match
that in the controller.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApSoftwareVersionMatch |
1.3.6.1.4.1.15983.3.1.3.27 |
| A mwlApSoftwareVersionMatch trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that mwlApSoftwareVersionMismatch is cleared.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApInitFailure |
1.3.6.1.4.1.15983.3.1.3.28 |
| A mwlApInitFailure trap signifies that the SNMPv2
entity, acting in an agent role, has detected that
the AP initialization failed.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApInitFailureCleared |
1.3.6.1.4.1.15983.3.1.3.29 |
| A mwlApInitFailureCleared trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that mwlApInitFailureCleared is cleared.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApRadioCardFailure |
1.3.6.1.4.1.15983.3.1.3.30 |
| A mwlApRadioCardFailure trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that a radio card in AP failed.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApRadioCardFailureCleared |
1.3.6.1.4.1.15983.3.1.3.31 |
| A mwlApRadioCardFailure trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that mwlApRadioCardFailure was cleared.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAuthFailure |
1.3.6.1.4.1.15983.3.1.3.32 |
| A mwlAuthFailure trap signifies that the SNMPv2
entity, acting in an agent role, has detected that
an incoming supplicant's access request is rejected
due to an authtication failure.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlRadiusServerSwitchover |
1.3.6.1.4.1.15983.3.1.3.33 |
| A mwlRadiusServerSwitchover trap signifies that the
SNMPv2 entity, acting in an agent role, has detected that
the controller switched from primary radius server to
secondary one.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlRadiusServerSwitchoverFailure |
1.3.6.1.4.1.15983.3.1.3.34 |
| A mwlRadiusServerSwitchoverFailure trap signifies that the
SNMPv2 entity, acting in an agent role, has detected that
the controller failed in switching over from the primary
radius server to the secondary one.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlRadiusServerRestored |
1.3.6.1.4.1.15983.3.1.3.35 |
| A mwlRadiusServerRestored trap signifies that the SNMPv2
entity, acting in an agent role, has detected that the
controller etected the primary radius server back online
and reverted to the primary radius server.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAcctRadiusServerSwitchover |
1.3.6.1.4.1.15983.3.1.3.36 |
| A mwlAcctRadiusServerSwitchover trap signifies that the
SNMPv2 entity, acting in an agent role, has detected that
the controller switched from primary accounting radius
server to the secondary one.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAcctRadiusServerSwitchoverFailure |
1.3.6.1.4.1.15983.3.1.3.37 |
| A mwlAcctRadiusServerSwitchoverFailure trap signifies
that the SNMPv2 entity, acting in an agent role, has
detected that the controller failed in switching over from
the primary accounting radius server to the secondary one.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlMicFailure |
1.3.6.1.4.1.15983.3.1.3.38 |
| A mwlMicFailure trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that an AP detected
message integrity code (MIC) failure.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlMicCounterMeasureActivated |
1.3.6.1.4.1.15983.3.1.3.39 |
| A mwlMicCounterMeasureActivated trap signifies that the
SNMPv2 entity, acting in an agent role, has detected that
MIC countermeasures feature gets activated. This feature
gets activated if more than one MIC failure is detected
within a pre-defined time period.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlMasterDown |
1.3.6.1.4.1.15983.3.1.3.40 |
| A mwlMasterDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that one of the
Master controllers in the N+1 network is to enter down state.
The Master controller is identified by mwWncVarsHostName and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlMasterUp |
1.3.6.1.4.1.15983.3.1.3.41 |
| A mwlMasterUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that one of the
Master controllers in the N+1 network is to enter down state.
The Master controller is identified by mwWncVarsHostName and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAtsNeighborLoss |
1.3.6.1.4.1.15983.3.1.3.42 |
| A mwlAtsNeighborLoss trap signifies that the SNMPv2
entity, acting in an agent role, has detected the ats neighbor
loss. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAtsNeighborLossCleared |
1.3.6.1.4.1.15983.3.1.3.43 |
| A mwlAtsNeighborLossCleared trap signifies that the SNMPv2
entity, acting in an agent role, has detected the ats neighbor
loss which was detected earlier has been cleared. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlHandoffFail |
1.3.6.1.4.1.15983.3.1.3.44 |
| A mwlHandoffFailure trap signifies that the SNMPv2
entity, acting in an agent role, has detected failure in
hand off. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlHandoffFailCleared |
1.3.6.1.4.1.15983.3.1.3.45 |
| A mwlHandoffFailureCleared trap signifies that the SNMPv2
entity, acting in an agent role, has detected failure in
hand off is cleared. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlResourceThresholdExceed |
1.3.6.1.4.1.15983.3.1.3.46 |
| A mwlResourceThresholdExceed trap signifies that the SNMPv2
entity, acting in an agent role, has detected the consumption of
resources has exceeded the threshold.
The system is identified by mwWncVarsHostName. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlResourceThresholdExceedCleared |
1.3.6.1.4.1.15983.3.1.3.47 |
| A mwlResourceThresholdExceedCleared trap signifies that the SNMPv2
entity, acting in an agent role, has detected the consumption of
resources which had exceeded the threshold is now cleared.
The system is identified by mwWncVarsHostName. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlSystemFailure |
1.3.6.1.4.1.15983.3.1.3.48 |
| A mwlSystemFailure trap signifies that the SNMPv2
entity, acting in an agent role, has detected failure in
the system.
The system is identified by mwWncVarsHostName. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlSystemFailureCleared |
1.3.6.1.4.1.15983.3.1.3.49 |
| A mwlSystemFailureCleared trap signifies that the SNMPv2
entity, acting in an agent role, has detected that the system which
had a failure previously is now cleared.
The system is identified by mwWncVarsHostName. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApBootimageVersionMismatch |
1.3.6.1.4.1.15983.3.1.3.50 |
| A mwlApBootimageVersionMismatch trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that the bootimage version in AP (Ats) does not match
that in the controller.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApBootimageVersionMatch |
1.3.6.1.4.1.15983.3.1.3.51 |
| A mwlApBootimageVersionMatch trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that the mwlApBootimageVersionMismatch is cleared.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlMacFilterDeny |
1.3.6.1.4.1.15983.3.1.3.52 |
| A mwlMacFilterDeny trap signifies that the SNMPv2
entity, acting in an agent role, has detected the station
which is denied access.
Details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlMacFilterDenyCleared |
1.3.6.1.4.1.15983.3.1.3.53 |
| A mwlMacFilterDeny trap signifies that the SNMPv2
entity, acting in an agent role, has detected mwlMacFilterDeny
is cleared.
Details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlSoftwareLicenseExpired |
1.3.6.1.4.1.15983.3.1.3.54 |
| A mwlSoftwareLicenseExpired trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the software license
has expired.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlSoftwareLicenseInstalled |
1.3.6.1.4.1.15983.3.1.3.55 |
| A mwlSoftwareLicenseInstalled trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the software license
has been installed.
The details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApTemperature |
1.3.6.1.4.1.15983.3.1.3.56 |
| A mwlApTemperature trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the temperature on the
ap has raised.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlApTemperatureCleared |
1.3.6.1.4.1.15983.3.1.3.57 |
| A mwlApTemperatureCleared trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the temperature on the
ap has come down to normal.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlHardwareDiagnostic |
1.3.6.1.4.1.15983.3.1.3.58 |
| A mwlHardwareDiagnostic trap signifies that the SNMPv2
entity, acting in an agent role, has detected hardware Diagnostics.
The system is identified by mwWncVarsHostName. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlHardwareDiagnosticCleared |
1.3.6.1.4.1.15983.3.1.3.59 |
| A mwlHardwareDiagnosticCleared trap signifies that the SNMPv2
entity, acting in an agent role, mwlHardwareDiagnostic trap is cleared.
The system is identified by mwWncVarsHostName. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlCacLimitReached |
1.3.6.1.4.1.15983.3.1.3.60 |
| A mwlCacLimitReached trap signifies that the SNMPv2
entity, acting in an agent role, has detected the CAC limit
is reached.
Details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlRadarDetected |
1.3.6.1.4.1.15983.3.1.3.61 |
| A mwlRadarDetected trap signifies that the SNMPv2
entity, acting in an agent role, has received the RADAR detected
notification.
Details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlOperationalChannelChange |
1.3.6.1.4.1.15983.3.1.3.62 |
| A mwlOperationalChannelChange trap signifies that the SNMPv2
entity, acting in an agent role, has received the Operational
channel change notification.
Details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlLicensingServerDown |
1.3.6.1.4.1.15983.3.1.3.63 |
| A mwlLicensingServerDown trap signifies that the SNMPv2
entity, acting in an agent role, has received the Licensing server is down.
Details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlNUpgradeLicenseCheckoutFail |
1.3.6.1.4.1.15983.3.1.3.64 |
| A mwlNUpgradeLicenseCheckoutFail trap signifies that the SNMPv2
entity, acting in an agent role, has received the 802.11 N Upgrade
license checkout fail notification.
Details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlNoLicenseEnforcementExpired |
1.3.6.1.4.1.15983.3.1.3.65 |
| A mwlNoLicenseEnforcementExpired trap signifies that the SNMPv2
entity, acting in an agent role, has received no license enforcement
on avtive/slave of NPlus1 will be expired.
Details of the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAtsRuntimeError |
1.3.6.1.4.1.15983.3.1.3.66 |
| A mwlAtsRuntimeError trap signifies that the SNMPv2 entity,
acting in an agent role, has received the notification indicating
an internal error in AP configuration.
This error is detected by AP itself and results in reboot of AP
without affecting any service, to get correct configuration.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| mwlAtsRuntimeErrorCleared |
1.3.6.1.4.1.15983.3.1.3.67 |
| A mwlAtsRuntimeErrorCleared trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the AP Runtime Error
condition is cleared.
The AP (Ats) is identified by mwApNodeId and details of
the trap is described by mwlTrapContent. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| meru-reqs |
1.3.6.1.4.1.15983.5 |
| Tok_String |
| Status: obsolete |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|