ME1200-DHCP-RELAY-MIB

File: ME1200-DHCP-RELAY-MIB.mib (10794 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CISCOME1200-MIB

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE TEXTUAL-CONVENTION me1200SwitchMgmt
TruthValue IpAddress Unsigned32

Defined Types

ME1200DhcpRelayInformationPolicyType  
This enumeration indicates the DHCP relay information policy type.
TEXTUAL-CONVENTION    
  INTEGER replace(0), keep(1), drop(2)  

Defined Values

me1200DhcpRelayMIB 1.3.6.1.4.1.9.9.815.1.55
This is a private version of the DHCP Relay MIB
MODULE-IDENTITY    

me1200DhcpRelayMIBObjects 1.3.6.1.4.1.9.9.815.1.55.1
OBJECT IDENTIFIER    

me1200DhcpRelayConfig 1.3.6.1.4.1.9.9.815.1.55.1.2
OBJECT IDENTIFIER    

me1200DhcpRelayGlobals 1.3.6.1.4.1.9.9.815.1.55.1.2.1
OBJECT IDENTIFIER    

me1200DhcpRelayGlobalsMode 1.3.6.1.4.1.9.9.815.1.55.1.2.1.1
Global mode of DHCP relay. true(1) is to enable DHCP relay and false(2) is to disable it.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200DhcpRelayGlobalsServerIpAddress 1.3.6.1.4.1.9.9.815.1.55.1.2.1.2
Server IP address. This IP address is for DHCP server where the DHCP relay will relay DHCP packets to.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

me1200DhcpRelayGlobalsInformationMode 1.3.6.1.4.1.9.9.815.1.55.1.2.1.3
Indicates the DHCP relay information mode option operation. Possible modes are - Enabled: Enable DHCP relay information mode operation. When DHCP relay information mode operation is enabled, the agent inserts specific information (option 82) into a DHCP message when forwarding to DHCP server and removes it from a DHCP message when transferring to DHCP client. It only works when DHCP relay operation mode is enabled. Disabled: Disable DHCP relay information mode operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200DhcpRelayGlobalsInformationPolicy 1.3.6.1.4.1.9.9.815.1.55.1.2.1.4
Indicates the DHCP relay information option policy. When DHCP relay information mode operation is enabled, if the agent receives a DHCP message that already contains relay agent information it will enforce the policy. The 'Replace' policy is invalid when relay information mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DhcpRelayInformationPolicyType  

me1200DhcpRelayStatus 1.3.6.1.4.1.9.9.815.1.55.1.3
OBJECT IDENTIFIER    

me1200DhcpRelayStatistics 1.3.6.1.4.1.9.9.815.1.55.1.3.1
OBJECT IDENTIFIER    

me1200DhcpRelayStatisticsServerPacketsRelayed 1.3.6.1.4.1.9.9.815.1.55.1.3.1.1
Packets relayed from server to client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsServerPacketErrors 1.3.6.1.4.1.9.9.815.1.55.1.3.1.2
Errors sending packets to servers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsClientPacketsRelayed 1.3.6.1.4.1.9.9.815.1.55.1.3.1.3
Packets relayed from client to server.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsClientPacketErrors 1.3.6.1.4.1.9.9.815.1.55.1.3.1.4
Errors sending packets to clients.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsAgentOptionErrors 1.3.6.1.4.1.9.9.815.1.55.1.3.1.5
Number of packets forwarded without agent options because there was no room.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsMissingAgentOption 1.3.6.1.4.1.9.9.815.1.55.1.3.1.6
Number of packets dropped because no RAI option matching our ID was found.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsBadCircuitId 1.3.6.1.4.1.9.9.815.1.55.1.3.1.7
Circuit ID option in matching RAI option did not match any known circuit ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsMissingCircuitId 1.3.6.1.4.1.9.9.815.1.55.1.3.1.8
Circuit ID option in matching RAI option was missing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsBadRemoteId 1.3.6.1.4.1.9.9.815.1.55.1.3.1.9
Remote ID option in matching RAI option did not match any known remote ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsMissingRemoteId 1.3.6.1.4.1.9.9.815.1.55.1.3.1.10
Remote ID option in matching RAI option was missing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsReceiveServerPackets 1.3.6.1.4.1.9.9.815.1.55.1.3.1.11
Receive DHCP message from server.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsReceiveClientPackets 1.3.6.1.4.1.9.9.815.1.55.1.3.1.12
Receive DHCP message from client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsReceiveClientAgentOption 1.3.6.1.4.1.9.9.815.1.55.1.3.1.13
Receive relay agent information option from client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsReplaceAgentOption 1.3.6.1.4.1.9.9.815.1.55.1.3.1.14
Replace relay agent information option.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsKeepAgentOption 1.3.6.1.4.1.9.9.815.1.55.1.3.1.15
Keep relay agent information option.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayStatisticsDropAgentOption 1.3.6.1.4.1.9.9.815.1.55.1.3.1.16
Drop relay agent information option.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200DhcpRelayControl 1.3.6.1.4.1.9.9.815.1.55.1.4
OBJECT IDENTIFIER    

me1200DhcpRelayControlClearStatistics 1.3.6.1.4.1.9.9.815.1.55.1.4.1
The action to clear statistics. true(1) is to clear the statistics data. false(2), then, does nothing.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200DhcpRelayMIBConformance 1.3.6.1.4.1.9.9.815.1.55.2
OBJECT IDENTIFIER    

me1200DhcpRelayMIBCompliances 1.3.6.1.4.1.9.9.815.1.55.2.1
OBJECT IDENTIFIER    

me1200DhcpRelayMIBGroups 1.3.6.1.4.1.9.9.815.1.55.2.2
OBJECT IDENTIFIER    

me1200DhcpRelayGlobalsInfoGroup 1.3.6.1.4.1.9.9.815.1.55.2.2.1
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200DhcpRelayStatisticsInfoGroup 1.3.6.1.4.1.9.9.815.1.55.2.2.2
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200DhcpRelayControlInfoGroup 1.3.6.1.4.1.9.9.815.1.55.2.2.3
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200DhcpRelayMIBCompliance 1.3.6.1.4.1.9.9.815.1.55.2.1.1
The compliance statement for the implementation.
Status: current Access: read-write
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor