ME1200-ACCESS-MANAGEMENT-MIB

File: ME1200-ACCESS-MANAGEMENT-MIB.mib (25892 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CISCOME1200-MIB INET-ADDRESS-MIB ME1200-TC

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE TEXTUAL-CONVENTION me1200SwitchMgmt
InetAddressIPv6 ME1200RowEditorState ME1200Unsigned16
Integer32 IpAddress Unsigned32
TruthValue

Defined Types

ME1200AccessManagementIpv4Entry  
SEQUENCE    
  me1200AccessManagementIpv4AccessIndex Integer32
  me1200AccessManagementIpv4VlanId ME1200Unsigned16
  me1200AccessManagementIpv4StartAddress IpAddress
  me1200AccessManagementIpv4EndAddress IpAddress
  me1200AccessManagementIpv4WebServices TruthValue
  me1200AccessManagementIpv4SnmpServices TruthValue
  me1200AccessManagementIpv4TelnetServices TruthValue
  me1200AccessManagementIpv4Action ME1200RowEditorState

ME1200AccessManagementIpv6Entry  
SEQUENCE    
  me1200AccessManagementIpv6AccessIndex Integer32
  me1200AccessManagementIpv6VlanId ME1200Unsigned16
  me1200AccessManagementIpv6StartAddress InetAddressIPv6
  me1200AccessManagementIpv6EndAddress InetAddressIPv6
  me1200AccessManagementIpv6WebServices TruthValue
  me1200AccessManagementIpv6SnmpServices TruthValue
  me1200AccessManagementIpv6TelnetServices TruthValue
  me1200AccessManagementIpv6Action ME1200RowEditorState

Defined Values

me1200AccessManagementMib 1.3.6.1.4.1.9.9.815.1.51
This is a private version of the Access Management MIB
MODULE-IDENTITY    

me1200AccessManagementMIBObjects 1.3.6.1.4.1.9.9.815.1.51.1
OBJECT IDENTIFIER    

me1200AccessManagementConfig 1.3.6.1.4.1.9.9.815.1.51.1.2
OBJECT IDENTIFIER    

me1200AccessManagementGlobals 1.3.6.1.4.1.9.9.815.1.51.1.2.1
OBJECT IDENTIFIER    

me1200AccessManagementGlobalsAdminState 1.3.6.1.4.1.9.9.815.1.51.1.2.1.1
Enable/Disable the Access Management global functionality.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv4Table 1.3.6.1.4.1.9.9.815.1.51.1.2.2
This is a table for managing Access Management per IPv4 basis
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200AccessManagementIpv4Entry

me1200AccessManagementIpv4Entry 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1
Each entry has a set of parameters
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200AccessManagementIpv4Entry  

me1200AccessManagementIpv4AccessIndex 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1.1
Index for Access Management IPv4/IPv6 table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

me1200AccessManagementIpv4VlanId 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1.2
The ID of specific VLAN interface that Access Management should take effect for IPv4.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned16  

me1200AccessManagementIpv4StartAddress 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1.3
The starting IPv4 address of the range that Access Management performs checking.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

me1200AccessManagementIpv4EndAddress 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1.4
The ending IPv4 address of the range that Access Management performs checking.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

me1200AccessManagementIpv4WebServices 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1.5
Enable/Disable HTTP and HTTPS functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv4 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv4SnmpServices 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1.6
Enable/Disable SNMP functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv4 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv4TelnetServices 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1.7
Enable/Disable TELNET/SSH functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv4 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv4Action 1.3.6.1.4.1.9.9.815.1.51.1.2.2.1.100
Action
Status: current Access: read-write
OBJECT-TYPE    
  ME1200RowEditorState  

me1200AccessManagementIpv4TableRowEditor 1.3.6.1.4.1.9.9.815.1.51.1.2.3
OBJECT IDENTIFIER    

me1200AccessManagementIpv4TableRowEditorAccessIndex 1.3.6.1.4.1.9.9.815.1.51.1.2.3.1
Index for Access Management IPv4/IPv6 table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

me1200AccessManagementIpv4TableRowEditorVlanId 1.3.6.1.4.1.9.9.815.1.51.1.2.3.2
The ID of specific VLAN interface that Access Management should take effect for IPv4.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned16  

me1200AccessManagementIpv4TableRowEditorStartAddress 1.3.6.1.4.1.9.9.815.1.51.1.2.3.3
The starting IPv4 address of the range that Access Management performs checking.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

me1200AccessManagementIpv4TableRowEditorEndAddress 1.3.6.1.4.1.9.9.815.1.51.1.2.3.4
The ending IPv4 address of the range that Access Management performs checking.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

me1200AccessManagementIpv4TableRowEditorWebServices 1.3.6.1.4.1.9.9.815.1.51.1.2.3.5
Enable/Disable HTTP and HTTPS functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv4 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv4TableRowEditorSnmpServices 1.3.6.1.4.1.9.9.815.1.51.1.2.3.6
Enable/Disable SNMP functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv4 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv4TableRowEditorTelnetServices 1.3.6.1.4.1.9.9.815.1.51.1.2.3.7
Enable/Disable TELNET/SSH functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv4 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv4TableRowEditorAction 1.3.6.1.4.1.9.9.815.1.51.1.2.3.100
Action
Status: current Access: read-write
OBJECT-TYPE    
  ME1200RowEditorState  

me1200AccessManagementIpv6Table 1.3.6.1.4.1.9.9.815.1.51.1.2.4
This is a table for managing Access Management per IPv6 basis
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200AccessManagementIpv6Entry

me1200AccessManagementIpv6Entry 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1
Each entry has a set of parameters
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200AccessManagementIpv6Entry  

me1200AccessManagementIpv6AccessIndex 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1.1
Index for Access Management IPv4/IPv6 table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

me1200AccessManagementIpv6VlanId 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1.2
The ID of specific VLAN interface that Access Management should take effect for IPv6.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned16  

me1200AccessManagementIpv6StartAddress 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1.3
The starting IPv6 address of the range that Access Management performs checking.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

me1200AccessManagementIpv6EndAddress 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1.4
The ending IPv6 address of the range that Access Management performs checking.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

me1200AccessManagementIpv6WebServices 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1.5
Enable/Disable HTTP and HTTPS functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv6 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv6SnmpServices 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1.6
Enable/Disable SNMP functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv6 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv6TelnetServices 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1.7
Enable/Disable TELNET/SSH functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv6 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv6Action 1.3.6.1.4.1.9.9.815.1.51.1.2.4.1.100
Action
Status: current Access: read-write
OBJECT-TYPE    
  ME1200RowEditorState  

me1200AccessManagementIpv6TableRowEditor 1.3.6.1.4.1.9.9.815.1.51.1.2.5
OBJECT IDENTIFIER    

me1200AccessManagementIpv6TableRowEditorAccessIndex 1.3.6.1.4.1.9.9.815.1.51.1.2.5.1
Index for Access Management IPv4/IPv6 table.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

me1200AccessManagementIpv6TableRowEditorVlanId 1.3.6.1.4.1.9.9.815.1.51.1.2.5.2
The ID of specific VLAN interface that Access Management should take effect for IPv6.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned16  

me1200AccessManagementIpv6TableRowEditorStartAddress 1.3.6.1.4.1.9.9.815.1.51.1.2.5.3
The starting IPv6 address of the range that Access Management performs checking.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

me1200AccessManagementIpv6TableRowEditorEndAddress 1.3.6.1.4.1.9.9.815.1.51.1.2.5.4
The ending IPv6 address of the range that Access Management performs checking.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

me1200AccessManagementIpv6TableRowEditorWebServices 1.3.6.1.4.1.9.9.815.1.51.1.2.5.5
Enable/Disable HTTP and HTTPS functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv6 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv6TableRowEditorSnmpServices 1.3.6.1.4.1.9.9.815.1.51.1.2.5.6
Enable/Disable SNMP functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv6 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv6TableRowEditorTelnetServices 1.3.6.1.4.1.9.9.815.1.51.1.2.5.7
Enable/Disable TELNET/SSH functionality via Access Management. At least one of WebServices/SnmpServices/TelnetServices has to be enabled for a specific AccessIndex in Access Management IPv6 table.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementIpv6TableRowEditorAction 1.3.6.1.4.1.9.9.815.1.51.1.2.5.100
Action
Status: current Access: read-write
OBJECT-TYPE    
  ME1200RowEditorState  

me1200AccessManagementStatus 1.3.6.1.4.1.9.9.815.1.51.1.3
OBJECT IDENTIFIER    

me1200AccessManagementStatistics 1.3.6.1.4.1.9.9.815.1.51.1.3.1
OBJECT IDENTIFIER    

me1200AccessManagementStatisticsHttpReceivedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.1
Received count of frames via HTTP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsHttpAllowedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.2
Permit count of frames via HTTP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsHttpDiscardedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.3
Drop count of frames via HTTP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsHttpsReceivedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.4
Received count of frames via HTTPS.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsHttpsAllowedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.5
Permit count of frames via HTTPS.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsHttpsDiscardedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.6
Drop count of frames via HTTPS.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsSnmpReceivedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.7
Received count of frames via SNMP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsSnmpAllowedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.8
Permit count of frames via SNMP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsSnmpDiscardedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.9
Drop count of frames via SNMP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsTelnetReceivedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.10
Received count of frames via TELNET.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsTelnetAllowedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.11
Permit count of frames via TELNET.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsTelnetDiscardedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.12
Drop count of frames via TELNET.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsSshReceivedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.13
Received count of frames via SSH.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsSshAllowedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.14
Permit count of frames via SSH.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementStatisticsSshDiscardedPkts 1.3.6.1.4.1.9.9.815.1.51.1.3.1.15
Drop count of frames via SSH.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

me1200AccessManagementControl 1.3.6.1.4.1.9.9.815.1.51.1.4
OBJECT IDENTIFIER    

me1200AccessManagementControlStatistics 1.3.6.1.4.1.9.9.815.1.51.1.4.1
OBJECT IDENTIFIER    

me1200AccessManagementControlStatisticsClear 1.3.6.1.4.1.9.9.815.1.51.1.4.1.1
To trigger the control action (only) when TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200AccessManagementMIBConformance 1.3.6.1.4.1.9.9.815.1.51.2
OBJECT IDENTIFIER    

me1200AccessManagementMIBCompliances 1.3.6.1.4.1.9.9.815.1.51.2.1
OBJECT IDENTIFIER    

me1200AccessManagementMIBGroups 1.3.6.1.4.1.9.9.815.1.51.2.2
OBJECT IDENTIFIER    

me1200AccessManagementGlobalsInfoGroup 1.3.6.1.4.1.9.9.815.1.51.2.2.1
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200AccessManagementIpv4TableInfoGroup 1.3.6.1.4.1.9.9.815.1.51.2.2.2
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200AccessManagementIpv4TableRowEditorInfoGroup 1.3.6.1.4.1.9.9.815.1.51.2.2.3
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200AccessManagementIpv6TableInfoGroup 1.3.6.1.4.1.9.9.815.1.51.2.2.4
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200AccessManagementIpv6TableRowEditorInfoGroup 1.3.6.1.4.1.9.9.815.1.51.2.2.5
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200AccessManagementStatisticsInfoGroup 1.3.6.1.4.1.9.9.815.1.51.2.2.6
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200AccessManagementControlStatisticsInfoGroup 1.3.6.1.4.1.9.9.815.1.51.2.2.7
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200AccessManagementMibCompliance 1.3.6.1.4.1.9.9.815.1.51.2.1.1
The compliance statement for the implementation.
Status: current Access: read-write
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor