LBHUB-ECS-MIB
File:
LBHUB-ECS-MIB.mib (109234 bytes)
Imported modules
Imported symbols
Defined Types
ECSAgentManagementEntry |
|
SEQUENCE |
|
|
|
|
ecsAgentManagementAddr |
IpAddress |
|
|
ecsAgentManagementAccess |
INTEGER |
|
|
ecsAgentManAccessLevel |
INTEGER |
|
ECSAgentTrapReceiverEntry |
|
SEQUENCE |
|
|
|
|
ecsAgentTrapReceiverAddr |
IpAddress |
|
|
ecsAgentTrapType |
INTEGER |
|
|
ecsAgentTrapReceiverComm |
DisplayString |
Size(0..20) |
|
ecsAgentTrapLevel |
INTEGER |
|
ECSSlotConfigEntry |
|
SEQUENCE |
|
|
|
|
ecsSlotConfigIndex |
INTEGER |
|
|
ecsSlotCardName |
DisplayString |
|
|
ecsSlotDeviceType |
INTEGER |
|
|
ecsSlotSoftVerNum |
DisplayString |
|
|
ecsSlotHardVerNum |
INTEGER |
|
|
ecsSlotNumOfPorts |
INTEGER |
|
|
ecsSlotMediaType |
DisplayString |
|
|
ecsCardReset |
INTEGER |
|
|
ecsLampOverRide |
INTEGER |
|
|
ecsCardIsolated |
INTEGER |
|
|
ecsCardIpAddress |
IpAddress |
|
ECSRLCResilientLinkEntry |
|
SEQUENCE |
|
|
|
|
ecsRLMainLinkSlot |
INTEGER |
|
|
ecsRLMainLinkPort |
INTEGER |
|
|
ecsRLStandbySlot |
INTEGER |
|
|
ecsRLStandbyPort |
INTEGER |
|
|
ecsRLActiveLink |
INTEGER |
|
|
ecsResLinkState |
INTEGER |
|
ECSSecureRLCEntry |
|
SEQUENCE |
|
|
|
|
ecsSecRLCSlotIndex |
INTEGER |
|
|
ecsSecRLCPortIndex |
INTEGER |
|
|
ecsSecRLCLinkState |
INTEGER |
|
|
ecsSecRLCPortState |
INTEGER |
|
|
ecsSecRLCNTKState |
INTEGER |
|
|
ecsSecRLCBroadState |
INTEGER |
|
|
ecsSecRLCMultiState |
INTEGER |
|
|
ecsSecRLCLearnMode |
INTEGER |
|
|
ecsSecRLCReportMode |
INTEGER |
|
|
ecsSecRLCMACAddress |
OCTET STRING |
|
ECSRLCPortStatisticsEntry |
|
SEQUENCE |
|
|
|
|
ecsRepeaterSlotIndex |
INTEGER |
|
|
ecsRepeaterPortIndex |
INTEGER |
|
|
ecsRepeaterPortState |
INTEGER |
|
|
ecsRepeaterPartitionState |
INTEGER |
|
|
ecsGoodRcvdFrames |
Counter |
|
|
ecsTotalByteCount |
Counter |
|
|
ecsTotalErrorCount |
Counter |
|
|
ecsRxBroadcastFrames |
Counter |
|
|
ecsRxMulticastFrames |
Counter |
|
ECSRLCPortErrorEntry |
|
SEQUENCE |
|
|
|
|
ecsErrorSlotIndex |
INTEGER |
|
|
ecsErrorPortIndex |
INTEGER |
|
|
ecsCollisionsCount |
Counter |
|
|
ecsPartitions |
Counter |
|
|
ecsCarrierSenseErrors |
Counter |
|
|
ecsAlignErrors |
Counter |
|
|
ecsCRCErrors |
Counter |
|
|
ecsJabberErrors |
Counter |
|
ECSRLCPortInfoEntry |
|
SEQUENCE |
|
|
|
|
ecsInfoSlotIndex |
INTEGER |
|
|
ecsInfoPortIndex |
INTEGER |
|
|
ecsInfoPortName |
DisplayString |
|
|
ecsRepeaterPartitionAlgor |
INTEGER |
|
|
ecsJabberLockProtect |
INTEGER |
|
|
ecsPortTest |
INTEGER |
|
|
ecsPortErrorState |
INTEGER |
|
|
ecsPortReset |
INTEGER |
|
|
ecsPortPartitionTraps |
INTEGER |
|
|
ecsPortLinkTraps |
INTEGER |
|
|
ecsPortBootState |
INTEGER |
|
|
ecsPortSLMode |
INTEGER |
|
ECSRLCcrcEntry |
|
SEQUENCE |
|
|
|
|
ecsCRCSlotIndex |
INTEGER |
|
|
ecsCRCPortIndex |
INTEGER |
|
|
ecsCRCErrorRate |
Gauge |
|
|
ecsCRCThreshold |
INTEGER |
|
|
ecsCRCDecRateValue |
INTEGER |
|
|
ecsCRCDecRateUnits |
INTEGER |
|
|
ecsCRCHysteresisValue |
INTEGER |
|
ECSRLCtrafficEntry |
|
SEQUENCE |
|
|
|
|
ecsTrafficSlotIndex |
INTEGER |
|
|
ecsTrafficPortIndex |
INTEGER |
|
|
ecsTrafficRate |
Gauge |
|
|
ecsTrafficThreshold |
INTEGER |
|
|
ecsTrafficDecRateValue |
INTEGER |
|
|
ecsTrafficDecRateUnits |
INTEGER |
|
|
ecsTrafficHysteresisValue |
INTEGER |
|
ECSRLCcollisionEntry |
|
SEQUENCE |
|
|
|
|
ecsCollisionSlotIndex |
INTEGER |
|
|
ecsCollisionPortIndex |
INTEGER |
|
|
ecsCollisionRate |
Gauge |
|
|
ecsCollisionThreshold |
INTEGER |
|
|
ecsCollisionDecRateValue |
INTEGER |
|
|
ecsCollisionDecRateUnits |
INTEGER |
|
|
ecsCollisionHysteresisValue |
INTEGER |
|
ECSRLCjabberEntry |
|
SEQUENCE |
|
|
|
|
ecsJabberSlotIndex |
INTEGER |
|
|
ecsJabberPortIndex |
INTEGER |
|
|
ecsJabberErrorRate |
Gauge |
|
|
ecsJabberThreshold |
INTEGER |
|
|
ecsJabberDecRateValue |
INTEGER |
|
|
ecsJabberDecRateUnits |
INTEGER |
|
|
ecsJabberHysteresisValue |
INTEGER |
|
ECSRLCalignEntry |
|
SEQUENCE |
|
|
|
|
ecsAlignSlotIndex |
INTEGER |
|
|
ecsAlignPortIndex |
INTEGER |
|
|
ecsAlignErrorRate |
Gauge |
|
|
ecsAlignThreshold |
INTEGER |
|
|
ecsAlignDecRateValue |
INTEGER |
|
|
ecsAlignDecRateUnits |
INTEGER |
|
|
ecsAlignHysteresisValue |
INTEGER |
|
ECSRLCcarrierEntry |
|
SEQUENCE |
|
|
|
|
ecsCarrierSlotIndex |
INTEGER |
|
|
ecsCarrierPortIndex |
INTEGER |
|
|
ecsCarrierSenseErrorRate |
Gauge |
|
|
ecsCarrierSenseThreshold |
INTEGER |
|
|
ecsCarrierSenseRateValue |
INTEGER |
|
|
ecsCarrierSenseRateUnits |
INTEGER |
|
|
ecsCarrierSenseHysteresisValue |
INTEGER |
|
ECSRLCSlotStatisticsEntry |
|
SEQUENCE |
|
|
|
|
ecsRLCSlotIndex |
INTEGER |
|
|
ecsRLCGoodRcvdFrames |
Counter |
|
|
ecsRLCTotalByteCount |
Counter |
|
|
ecsRLCTotalErrorCount |
Counter |
|
|
ecsRLCTotalBroadcasts |
Counter |
|
|
ecsRLCTotalMulticasts |
Counter |
|
ECSRLCSlotErrorEntry |
|
SEQUENCE |
|
|
|
|
ecsRLCErrorSlotIndex |
INTEGER |
|
|
ecsRLCCollisionsCount |
Counter |
|
|
ecsRLCPartitions |
Counter |
|
|
ecsRLCCarrierSenseErrors |
Counter |
|
|
ecsRLCAlignErrors |
Counter |
|
|
ecsRLCCRCErrors |
Counter |
|
|
ecsRLCJabberErrors |
Counter |
|
ECSRLCStationLocateEntry |
|
SEQUENCE |
|
|
|
|
ecsRLCSLAddress |
OCTET STRING |
|
|
ecsRLCSLSlotIndex |
INTEGER |
|
|
ecsRLCSLPortIndex |
INTEGER |
|
|
ecsRLCSLStatus |
INTEGER |
|
ECSRLCNewStationLocateEntry |
|
SEQUENCE |
|
|
|
|
ecsRLCNewSLAddress |
OCTET STRING |
|
|
ecsRLCNewSLSlotIndex |
INTEGER |
|
|
ecsRLCNewSLPortIndex |
INTEGER |
|
ECSDummyEntry |
|
SEQUENCE |
|
|
|
|
ecsDummyIndex |
INTEGER |
|
|
ecsDummyValue |
INTEGER |
|
Defined Values
mib-2 |
1.3.6.1.2.1 |
OBJECT IDENTIFIER |
|
|
|
system |
1.3.6.1.2.1.1 |
OBJECT IDENTIFIER |
|
|
|
at |
1.3.6.1.2.1.3 |
OBJECT IDENTIFIER |
|
|
|
ip |
1.3.6.1.2.1.4 |
OBJECT IDENTIFIER |
|
|
|
icmp |
1.3.6.1.2.1.5 |
OBJECT IDENTIFIER |
|
|
|
tcp |
1.3.6.1.2.1.6 |
OBJECT IDENTIFIER |
|
|
|
udp |
1.3.6.1.2.1.7 |
OBJECT IDENTIFIER |
|
|
|
egp |
1.3.6.1.2.1.8 |
OBJECT IDENTIFIER |
|
|
|
snmp |
1.3.6.1.2.1.11 |
OBJECT IDENTIFIER |
|
|
|
a3Com |
1.3.6.1.4.1.43 |
OBJECT IDENTIFIER |
|
|
|
products |
1.3.6.1.4.1.43.1 |
OBJECT IDENTIFIER |
|
|
|
brouter |
1.3.6.1.4.1.43.1.4 |
OBJECT IDENTIFIER |
|
|
|
hub |
1.3.6.1.4.1.43.1.8 |
OBJECT IDENTIFIER |
|
|
|
cards |
1.3.6.1.4.1.43.1.9 |
OBJECT IDENTIFIER |
|
|
|
amp-mib |
1.3.6.1.4.1.43.3 |
OBJECT IDENTIFIER |
|
|
|
generic |
1.3.6.1.4.1.43.10 |
OBJECT IDENTIFIER |
|
|
|
setup |
1.3.6.1.4.1.43.10.2 |
OBJECT IDENTIFIER |
|
|
|
sysLoader |
1.3.6.1.4.1.43.10.3 |
OBJECT IDENTIFIER |
|
|
|
security |
1.3.6.1.4.1.43.10.4 |
OBJECT IDENTIFIER |
|
|
|
gauges |
1.3.6.1.4.1.43.10.5 |
OBJECT IDENTIFIER |
|
|
|
serialIf |
1.3.6.1.4.1.43.10.7 |
OBJECT IDENTIFIER |
|
|
|
localSnmp |
1.3.6.1.4.1.43.10.10 |
OBJECT IDENTIFIER |
|
|
|
manager |
1.3.6.1.4.1.43.10.11 |
OBJECT IDENTIFIER |
|
|
|
chassis |
1.3.6.1.4.1.43.10.14 |
OBJECT IDENTIFIER |
|
|
|
tokenRing |
1.3.6.1.4.1.43.10.16 |
OBJECT IDENTIFIER |
|
|
|
fault |
1.3.6.1.4.1.43.10.19 |
OBJECT IDENTIFIER |
|
|
|
poll |
1.3.6.1.4.1.43.10.20 |
OBJECT IDENTIFIER |
|
|
|
testData |
1.3.6.1.4.1.43.10.1.1 |
OBJECT IDENTIFIER |
|
|
|
ecsAgent |
1.3.6.1.4.1.43.9.1 |
OBJECT IDENTIFIER |
|
|
|
ecsVideo |
1.3.6.1.4.1.43.9.9 |
OBJECT IDENTIFIER |
|
|
|
ecsManufacturerId |
1.3.6.1.4.1.43.9.1.1.1 |
An atrribute to identify the manufacturer |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
ecsHardwareVersionNumber |
1.3.6.1.4.1.43.9.1.1.4 |
An atrribute to identify the hardware version. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsAgentSystemName |
1.3.6.1.4.1.43.9.1.2 |
This is an informational string that could be used to show
the name of the ECSAgent or management agent. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(32) |
|
ecsAgentSystemLocation |
1.3.6.1.4.1.43.9.1.3 |
This is an informational string that could be used to show
the physical location (i.e., area) of the ecsAgent
or management agent. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(32) |
|
ecsAgentSystemTime |
1.3.6.1.4.1.43.9.1.4 |
A representation of the system time of the management
system, taken from the epoch. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
ecsAgentStatus |
1.3.6.1.4.1.43.9.1.5 |
Indicates that the management agent is on line and operating. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
offline(1), online(2) |
|
ecsAgentAuthenticationStatus |
1.3.6.1.4.1.43.9.1.6 |
Indicates whether management frames are checked against entries
in the management tranmiter table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ecsAgentSecureManagementStatus |
1.3.6.1.4.1.43.9.1.7 |
Indicates whether the remote management of the security features
of the ECS are enabled or not. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2), secure-menu-entered(3), secure-password-violation(4), secure-config-update(5) |
|
ecsAgentFrontPanelSetupPassword |
1.3.6.1.4.1.43.9.1.11 |
The password used to gain access to the configuration
features of the front panel control of the device. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..8) |
|
ecsAgentFrontPanelPassword |
1.3.6.1.4.1.43.9.1.13 |
The password used to gain access to the front panel control
of the device. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..8) |
|
ecsAgentFrontPanelSecurePassword |
1.3.6.1.4.1.43.9.1.14 |
The password used to gain access to the security
features of the front panel control
of the device. This attribute is not viewable until
secure remote management is enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..8) |
|
ecsAgentFrontPanelLock |
1.3.6.1.4.1.43.9.1.15 |
The station front panel status. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), on(2) |
|
ecsAgentResetDevice |
1.3.6.1.4.1.43.9.1.16 |
Network management module reset status. Writing a 2 to this
object will reset the management agent. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notreset(1), reset(2) |
|
ecsAgentRestart |
1.3.6.1.4.1.43.9.1.18 |
Network management module restart status. Writing a 2 to his
object will restart the management agent. This initializes all
the counters, rereads the NVRAM data structure, and starts
executing from the beginning of the code. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notrestart(1), restart(2) |
|
ecsAgentDefaultConfig |
1.3.6.1.4.1.43.9.1.19 |
The device is returned to its factory settings. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), reverting(2) |
|
ecsAgentManagementEntry |
1.3.6.1.4.1.43.9.1.20.1 |
A source address address and privileges of a particular
management station. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSAgentManagementEntry |
|
|
ecsAgentManagementAccess |
1.3.6.1.4.1.43.9.1.20.1.2 |
Setting this object to the value invalid(1) invalidates the
corresponding entry in the ecsAgentManagementTable.
That is, it effectively disassociates the address
identified with the entry by removing the entry from the table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), off(2), superread(3), superreadwrite(4), readonly(5), readwrite(6), readonlysecure(7), readwritesecure(8) |
|
ecsAgentManAccessLevel |
1.3.6.1.4.1.43.9.1.20.1.3 |
The level of aceess attributed to tthis entry in the table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsAgentTrapReceiverEntry |
1.3.6.1.4.1.43.9.1.21.1 |
A destination address and community string for a particular
trap receiver. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSAgentTrapReceiverEntry |
|
|
ecsAgentTrapType |
1.3.6.1.4.1.43.9.1.21.1.2 |
Setting this object to the value invalid(1) invalidates the
corresponding entry in the ECSAgentTrapReceiverTable.
That is, it effectively disassociates the address
identified with the entry by removing the entry from the table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), off-on(2), generic(3), psu(4), fanfail(5), configuractionchange(6), port(7), resilience(8), rate(9), stationlocate(10), secure(11), secureport(12) |
|
ecsAgentTrapLevel |
1.3.6.1.4.1.43.9.1.21.1.4 |
Indicates the type of traps that will be sent to this
address. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsAgentAuthTrapState |
1.3.6.1.4.1.43.9.1.22 |
Enable or disable the use of authentication error trap generation. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
ecsAgentIpAddr |
1.3.6.1.4.1.43.9.1.23 |
The network management module's administrative IpAddress. The
current operational IpAddress can be obtained from the
ipAdEntAddr entry in the ipAddrTable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ecsAgentIpNetmask |
1.3.6.1.4.1.43.9.1.24 |
The network management module's administrative subnet mask.
The current operational subnet mask can be obtained from
the ipAdEntNetMask entry in the ipAddrTable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ecsAgentDefaultGateway |
1.3.6.1.4.1.43.9.1.25 |
The network management module's administrative default
gateway IpAddress. The current operational default
gateway's IpAddress can be obtained from the ipRoutingTable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ecsAgentIpBroadAddr |
1.3.6.1.4.1.43.9.1.26 |
The network management module's adminstrative default
broadcast address |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ecsAgentMACAddress |
1.3.6.1.4.1.43.9.1.27 |
The MAC address of the ECS Agent. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ecsAgentSecureTrapState |
1.3.6.1.4.1.43.9.1.28 |
Enable or disable the generation of security traps. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
ecsAgentLastSystemError |
1.3.6.1.4.1.43.9.1.29 |
The error number of the last system error. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsAgentLastTrap |
1.3.6.1.4.1.43.9.1.30 |
The time, taken from the epoch when the last trap
or event would have been generated. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
ecsRackType |
1.3.6.1.4.1.43.9.2.1 |
The rack type of the LinkBuilder ECS. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), ecs4(2), ecs10(3) |
|
ecsSlotConfigEntry |
1.3.6.1.4.1.43.9.2.2.1 |
The description of the type of module in each slot. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSSlotConfigEntry |
|
|
ecsSlotConfigIndex |
1.3.6.1.4.1.43.9.2.2.1.1 |
The device type found in a slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsSlotCardName |
1.3.6.1.4.1.43.9.2.2.1.2 |
This is an informational string that could be
used to show the name of a card. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
ecsSlotDeviceType |
1.3.6.1.4.1.43.9.2.2.1.3 |
The device type found in a slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
empty(1), unknown(2), managementcard(3), thinEthernetCard(4), thinEthernetCardpAUI(5), unshieldedTwistedPair(6), fibre(7), bridge-Line-Card(8), monitor(9), shieldedTwistedPair(10), fanout(11), secureUnshieldedTP(12), secureSheildedTP(13), secureFibre(14), secureFanout(15), secureThinEthernet(16), terminalserver(17), remotebridge(18), videoswitch(19) |
|
ecsSlotSoftVerNum |
1.3.6.1.4.1.43.9.2.2.1.4 |
A description of the software version number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
ecsSlotHardVerNum |
1.3.6.1.4.1.43.9.2.2.1.5 |
Hardware version number of the card. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsSlotNumOfPorts |
1.3.6.1.4.1.43.9.2.2.1.6 |
The number of repeater ports on the card. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCardReset |
1.3.6.1.4.1.43.9.2.2.1.8 |
The hardware for specified repeater line card is reset. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
not-reset(1), reset(2) |
|
ecsLampOverRide |
1.3.6.1.4.1.43.9.2.2.1.9 |
The lamps on the specified repeater line card are forced on for
normal operation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ecsCardIsolated |
1.3.6.1.4.1.43.9.2.2.1.10 |
The LinkBuilder ECS card is isolated from the chassis backplane. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
not-isolated(1), isolated(2), cant-isolate(3) |
|
ecsCardIpAddress |
1.3.6.1.4.1.43.9.2.2.1.11 |
For some devices the LinkBuilder ECS may be able
to determine the IP address of a intelligent card
that is in the slot. If the value returned is
0.0.0.0 then this indicates that the address can
not be determined. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ecsPSUStatus |
1.3.6.1.4.1.43.9.2.3 |
The status of the PSUs in the LinkBuilder ECS. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ok(1), psu1failed(2), psu2failed(3) |
|
ecsFanStatus |
1.3.6.1.4.1.43.9.2.4 |
The status of the fans in the LinkBuilder ECS. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ok(1), failed(2) |
|
ecsRLCNumberOfResilientLinks |
1.3.6.1.4.1.43.9.3.1 |
The number of resilient links currently configured
on the LinkBuilder ECS. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCNumberOfDOBPorts |
1.3.6.1.4.1.43.9.3.2 |
The total number of ports that are disabled on boot,
making them suitable for use with resilient links. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCResilientLinkEntry |
1.3.6.1.4.1.43.9.3.3.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCResilientLinkEntry |
|
|
ecsRLMainLinkSlot |
1.3.6.1.4.1.43.9.3.3.1.1 |
The Slot Number for the main link of this resilient link. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLMainLinkPort |
1.3.6.1.4.1.43.9.3.3.1.2 |
The Port Number for the main link of this resilient link. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLStandbySlot |
1.3.6.1.4.1.43.9.3.3.1.3 |
The Slot Number for the standby link of this resilient link. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLStandbyPort |
1.3.6.1.4.1.43.9.3.3.1.4 |
The Port Number for the standby link of this resilient link. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLActiveLink |
1.3.6.1.4.1.43.9.3.3.1.5 |
The resilient link currently in use for traffic transmission. For
a read the attribute indicates which link is active.
A new link will always be configured with the main
link being the active link. If the link status cannot be determined,
the value unknown(1) is returned. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), none(2), main(3), standby(4), both(5) |
|
ecsResLinkState |
1.3.6.1.4.1.43.9.3.3.1.6 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), operational(2), non-operational(3), switchlink(4), standby-jumperfault(5), main-absent(6), standby-absent(7), main-failed(8), standby-failed(9), both-failed(10) |
|
ecsSecureRLCMode |
1.3.6.1.4.1.43.9.4.1 |
Determines whether the management of Secure
Repeater Line Cards is disabled or not. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
ecsSecureTrapRepRate |
1.3.6.1.4.1.43.9.4.2 |
Determines the rate at which secure traps are sent
for a security violation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
continuous(1), one-minute(2), fifteen-mins(3), sixty-minutes(4) |
|
ecsSecureRLCTable |
1.3.6.1.4.1.43.9.4.3 |
A table which allows management
of the secure Repeater Line Cards. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSSecureRLCEntry |
|
ecsSecureRLCEntry |
1.3.6.1.4.1.43.9.4.3.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSSecureRLCEntry |
|
|
ecsSecRLCSlotIndex |
1.3.6.1.4.1.43.9.4.3.1.1 |
The secure repeater line card slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsSecRLCPortIndex |
1.3.6.1.4.1.43.9.4.3.1.2 |
The secure repeater line card port index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsSecRLCLinkState |
1.3.6.1.4.1.43.9.4.3.1.3 |
Attribute to determine whether the security
features are enabled on this port of the secure Repeater Line Card. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), secure(2), repeater(3) |
|
ecsSecRLCPortState |
1.3.6.1.4.1.43.9.4.3.1.4 |
Attribute to determine whether the port can be normally enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3), unauthorised-station-seen(4), unauthorised-station-port-disabled(5), authorised-station-learnt(6) |
|
ecsSecRLCNTKState |
1.3.6.1.4.1.43.9.4.3.1.5 |
Attribute to determine whether the Need to Know
feature is enabled on the secure Repeater Line Card. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
ecsSecRLCBroadState |
1.3.6.1.4.1.43.9.4.3.1.6 |
Attribute to determine whether broadcasts are allowed
or not allowed to be transmitted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
ecsSecRLCMultiState |
1.3.6.1.4.1.43.9.4.3.1.7 |
Attribute to determine whether multicasts are allowed
or not allowed to be transmitted. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
ecsSecRLCLearnMode |
1.3.6.1.4.1.43.9.4.3.1.8 |
Attribute to determine the learning
mode of the secure repeater line card. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), single(2), continual(3) |
|
ecsSecRLCReportMode |
1.3.6.1.4.1.43.9.4.3.1.9 |
Attribute to determine the reporting
mode of the secure repeater line card. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), reportonly(2), disconnectandreport(3) |
|
ecsSecRLCMACAddress |
1.3.6.1.4.1.43.9.4.3.1.10 |
The MAC address in use by the secure repeater line card. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ecsRLCPortStatisticsEntry |
1.3.6.1.4.1.43.9.5.1.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCPortStatisticsEntry |
|
|
ecsRepeaterSlotIndex |
1.3.6.1.4.1.43.9.5.1.1.1 |
The repeater slot index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRepeaterPortIndex |
1.3.6.1.4.1.43.9.5.1.1.2 |
The repeater port index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRepeaterPortState |
1.3.6.1.4.1.43.9.5.1.1.3 |
The repeater port state. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2), disabled-linkdown(3), enabled-linkdown(4), disabled-linkup(5), enabled-linkup(6) |
|
ecsRepeaterPartitionState |
1.3.6.1.4.1.43.9.5.1.1.4 |
The repeater port partition state. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), partitioned(2) |
|
ecsGoodRcvdFrames |
1.3.6.1.4.1.43.9.5.1.1.5 |
The number of good frames which have been received and repeted
by the specified port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsTotalByteCount |
1.3.6.1.4.1.43.9.5.1.1.6 |
The summation of the total number of bytes which have been
received in good frames and repeated by the specified port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsTotalErrorCount |
1.3.6.1.4.1.43.9.5.1.1.7 |
The summaration of all of the errors recorded in the PortErrors
table for the specified port |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRxBroadcastFrames |
1.3.6.1.4.1.43.9.5.1.1.8 |
The number of broadcast frames received on this port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRxMulticastFrames |
1.3.6.1.4.1.43.9.5.1.1.9 |
The number of broadcast frames received on this port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCPortErrorEntry |
1.3.6.1.4.1.43.9.5.2.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCPortErrorEntry |
|
|
ecsErrorSlotIndex |
1.3.6.1.4.1.43.9.5.2.1.1 |
The repeater slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsErrorPortIndex |
1.3.6.1.4.1.43.9.5.2.1.2 |
The repeater port index. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCollisionsCount |
1.3.6.1.4.1.43.9.5.2.1.3 |
A count of every attempt to transmit a frame that involved a
collision. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsPartitions |
1.3.6.1.4.1.43.9.5.2.1.4 |
The count of the number of partitions which have been
detected by the specified port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsCarrierSenseErrors |
1.3.6.1.4.1.43.9.5.2.1.5 |
The number of carrier sense errors which have been detected
by the specified port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsAlignErrors |
1.3.6.1.4.1.43.9.5.2.1.6 |
The number of frames with alignment errors which have been
received by the specified port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsCRCErrors |
1.3.6.1.4.1.43.9.5.2.1.7 |
The number of frames with CRC errors which have been received
by the specified port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsJabberErrors |
1.3.6.1.4.1.43.9.5.2.1.8 |
The number of jabber errors which have been detected by the
specified port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCPortInfoTable |
1.3.6.1.4.1.43.9.5.3 |
A table which summaries the status information for each active
port/slot |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSRLCPortInfoEntry |
|
ecsRLCPortInfoEntry |
1.3.6.1.4.1.43.9.5.3.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCPortInfoEntry |
|
|
ecsInfoSlotIndex |
1.3.6.1.4.1.43.9.5.3.1.1 |
The repeater slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsInfoPortIndex |
1.3.6.1.4.1.43.9.5.3.1.2 |
The repeater port index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsInfoPortName |
1.3.6.1.4.1.43.9.5.3.1.3 |
This is an informational string that could be used to show
the name of a port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
ecsRepeaterPartitionAlgor |
1.3.6.1.4.1.43.9.5.3.1.4 |
The current state of the repeater port algorithm. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ecsJabberLockProtect |
1.3.6.1.4.1.43.9.5.3.1.5 |
The current state of the jabber protect switch. This affects
all ports on the repeater ULA (not necessarily all ports
on the card). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ecsPortTest |
1.3.6.1.4.1.43.9.5.3.1.6 |
The Loopback test is performed on the specified port. This will
interrupt traffic on all ports on the repeater ULA
(not necessarily all ports on the card in a specified slot)
while the test is in progress. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
not-in-test(1), test(2), passed(3), failed(4) |
|
ecsPortErrorState |
1.3.6.1.4.1.43.9.5.3.1.7 |
The error status of the specified port. Under normal conditions this takes
the value 'normal' specifying that no error condition has been detected. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), normal(2), hi-collision(3), partition(4), high-crc-errorrate(5), high-alignment-errorrate(6), high-traffic-rate(7), high-jabber-errorrate(8), high-carriersense-errorrate(9), unpartitioned(10), linkstatechange-up(11), linkstatechange-down(12), acknowledged(255) |
|
ecsPortReset |
1.3.6.1.4.1.43.9.5.3.1.8 |
The specified port is reset. This will
interrupt traffic on all ports on the repeater ULA
(not necessarily all ports on the card in a specified slot)
while the reset is in progress. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
not-reset(1), reset(2) |
|
ecsPortPartitionTraps |
1.3.6.1.4.1.43.9.5.3.1.9 |
Determines whether partition traps will be sent for this port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
ecsPortLinkTraps |
1.3.6.1.4.1.43.9.5.3.1.10 |
Determines whether link traps will be sent for this port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2), not-applicable(3) |
|
ecsPortBootState |
1.3.6.1.4.1.43.9.5.3.1.11 |
Determines whether the port is disabled on boot (DOB),
and therefore suitable for resilient link use. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
ecsPortSLMode |
1.3.6.1.4.1.43.9.5.3.1.12 |
Determines whether station locate is enabled
for this port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
ecsRLCcrcTable |
1.3.6.1.4.1.43.9.5.4 |
Level at which port rate error rate trap is produced. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSRLCcrcEntry |
|
ecsRLCcrcEntry |
1.3.6.1.4.1.43.9.5.4.1 |
The number of frames with CRC errors which have been received
by the specified port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCcrcEntry |
|
|
ecsCRCSlotIndex |
1.3.6.1.4.1.43.9.5.4.1.1 |
The repeater slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCRCPortIndex |
1.3.6.1.4.1.43.9.5.4.1.2 |
The repeater port index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCRCErrorRate |
1.3.6.1.4.1.43.9.5.4.1.3 |
The gauge representing the CRC error rate. This is configured
using the CRC error rate configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ecsCRCThreshold |
1.3.6.1.4.1.43.9.5.4.1.4 |
Level at which port rate error rate trap is produced. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCRCDecRateValue |
1.3.6.1.4.1.43.9.5.4.1.5 |
VALUE that, along with Rate Units, determines the Rate
Interval, (in ns) between decrements of the CRC error guage,
Rate Interval = ( Units * Value ). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCRCDecRateUnits |
1.3.6.1.4.1.43.9.5.4.1.6 |
UNITS that, along with Rate value, determine the Rate
Interval Rate Interval = ( Units * Value ) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), microseconds(2), milliseconds(3), seconds(4), minutes(5), hours(6), days(7) |
|
ecsCRCHysteresisValue |
1.3.6.1.4.1.43.9.5.4.1.7 |
Specifies the value to which the CRC error guage must fall
before another crossing of the threshold results in a trap. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCtrafficTable |
1.3.6.1.4.1.43.9.5.5 |
The configuration parameters which must be set up in order to
use the traffic rate guage. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSRLCtrafficEntry |
|
ecsRLCtrafficEntry |
1.3.6.1.4.1.43.9.5.5.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCtrafficEntry |
|
|
ecsTrafficSlotIndex |
1.3.6.1.4.1.43.9.5.5.1.1 |
The repeater slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsTrafficPortIndex |
1.3.6.1.4.1.43.9.5.5.1.2 |
The repeater port index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsTrafficRate |
1.3.6.1.4.1.43.9.5.5.1.3 |
The gauge representing the rate at which good frames have been
received and repeated. This is configured using the traffic
rate configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ecsTrafficThreshold |
1.3.6.1.4.1.43.9.5.5.1.4 |
Level at which port rate error rate trap is produced. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsTrafficDecRateValue |
1.3.6.1.4.1.43.9.5.5.1.5 |
VALUE that, along with Rate Units, determines the Rate
Interval, (in ns) between decrements of the CRC error guage,
Rate Interval = ( Units * Value ). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsTrafficDecRateUnits |
1.3.6.1.4.1.43.9.5.5.1.6 |
UNITS that, along with Rate value, determine the Rate
Interval Rate Interval = ( Units * Value ) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), microseconds(2), milliseconds(3), seconds(4), minutes(5), hours(6), days(7) |
|
ecsTrafficHysteresisValue |
1.3.6.1.4.1.43.9.5.5.1.7 |
Specifies the value to which the CRC error guage must fall
before another crossing of the threshold results in a trap. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCcollisionTable |
1.3.6.1.4.1.43.9.5.6 |
The configuration parameters which must be set up in order
to use the collision rate guage. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSRLCcollisionEntry |
|
ecsRLCcollisionEntry |
1.3.6.1.4.1.43.9.5.6.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCcollisionEntry |
|
|
ecsCollisionSlotIndex |
1.3.6.1.4.1.43.9.5.6.1.1 |
The repeater slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCollisionPortIndex |
1.3.6.1.4.1.43.9.5.6.1.2 |
The repeater port index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCollisionRate |
1.3.6.1.4.1.43.9.5.6.1.3 |
The gauge representing the rate at which collisions have been
detected. This is configured using the collision rate
configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ecsCollisionThreshold |
1.3.6.1.4.1.43.9.5.6.1.4 |
Level at which the collision rate guage will produce a
High Collision rate trap. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCollisionDecRateValue |
1.3.6.1.4.1.43.9.5.6.1.5 |
VALUE that, along with Rate Units, determines the Rate
Interval, (in ns) between decrements of the CRC error guage,
Rate Interval = ( Units * Value ). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCollisionDecRateUnits |
1.3.6.1.4.1.43.9.5.6.1.6 |
UNITS that, along with Rate value, determine the Rate
Interval Rate Interval = ( Units * Value ) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), microseconds(2), milliseconds(3), seconds(4), minutes(5), hours(6), days(7) |
|
ecsCollisionHysteresisValue |
1.3.6.1.4.1.43.9.5.6.1.7 |
Specifies the value to which the Collision guage must fall
before another crossing of the threshold results in a trap. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCjabberTable |
1.3.6.1.4.1.43.9.5.7 |
The configuration parameters which must be set up in
order to use the jabber rate guage. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSRLCjabberEntry |
|
ecsRLCjabberEntry |
1.3.6.1.4.1.43.9.5.7.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCjabberEntry |
|
|
ecsJabberSlotIndex |
1.3.6.1.4.1.43.9.5.7.1.1 |
The repeater slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsJabberPortIndex |
1.3.6.1.4.1.43.9.5.7.1.2 |
The repeater port index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsJabberErrorRate |
1.3.6.1.4.1.43.9.5.7.1.3 |
The gauge representing the rate at which jabber errors
have been detected. This is configured using the jabber
rate configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ecsJabberThreshold |
1.3.6.1.4.1.43.9.5.7.1.4 |
Level at which port rate error rate trap is produced. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsJabberDecRateValue |
1.3.6.1.4.1.43.9.5.7.1.5 |
VALUE that, along with Rate Units, determine the Rate
Interval, Rate Interval = ( Units * Value ) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsJabberDecRateUnits |
1.3.6.1.4.1.43.9.5.7.1.6 |
UNITS that, along with Rate value, determine the Rate
Interval Rate Interval = ( Units * Value ) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), microseconds(2), milliseconds(3), seconds(4), minutes(5), hours(6), days(7) |
|
ecsJabberHysteresisValue |
1.3.6.1.4.1.43.9.5.7.1.7 |
Specifies the value to which the jabber error guage must
fall before another crossing of the threshold results in a trap. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCalignTable |
1.3.6.1.4.1.43.9.5.8 |
The configuration parameters which must be set up in order to
use the alignment error rate guage. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSRLCalignEntry |
|
ecsRLCalignEntry |
1.3.6.1.4.1.43.9.5.8.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCalignEntry |
|
|
ecsAlignSlotIndex |
1.3.6.1.4.1.43.9.5.8.1.1 |
The repeater slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsAlignPortIndex |
1.3.6.1.4.1.43.9.5.8.1.2 |
The repeater port index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsAlignErrorRate |
1.3.6.1.4.1.43.9.5.8.1.3 |
The gauge representing the alignment error rate. This is
configured using the alignment error rate configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ecsAlignThreshold |
1.3.6.1.4.1.43.9.5.8.1.4 |
Level at which port rate error rate trap is produced. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsAlignDecRateValue |
1.3.6.1.4.1.43.9.5.8.1.5 |
VALUE that, along with Rate Units, determines the Rate
Interval, (in ns) between decrements of the CRC error guage,
Rate Interval = ( Units * Value ), where UNITS are in ns |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsAlignDecRateUnits |
1.3.6.1.4.1.43.9.5.8.1.6 |
UNITS that, along with Rate value, determine the Rate
Interval Rate Interval = ( Units * Value ) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), microseconds(2), milliseconds(3), seconds(4), minutes(5), hours(6), days(7) |
|
ecsAlignHysteresisValue |
1.3.6.1.4.1.43.9.5.8.1.7 |
Specifies the value to which the CRC error guage must fall
before another crossing of the threshold results in a trap. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCcarrierTable |
1.3.6.1.4.1.43.9.5.9 |
The configuration parameters which must be set up in order
to use the carrier sense error rate guage. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSRLCcarrierEntry |
|
ecsRLCcarrierEntry |
1.3.6.1.4.1.43.9.5.9.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCcarrierEntry |
|
|
ecsCarrierSlotIndex |
1.3.6.1.4.1.43.9.5.9.1.1 |
The repeater slot index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCarrierPortIndex |
1.3.6.1.4.1.43.9.5.9.1.2 |
The repeater port index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCarrierSenseErrorRate |
1.3.6.1.4.1.43.9.5.9.1.3 |
The gauge representing the rate at which jabber errors have
been detected. This is configured using the jabber rate
configuration. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ecsCarrierSenseThreshold |
1.3.6.1.4.1.43.9.5.9.1.4 |
Level at which port rate error rate trap is produced. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCarrierSenseRateValue |
1.3.6.1.4.1.43.9.5.9.1.5 |
VALUE that, along with Rate Units, determines the Rate
Interval, (in ns) between decrements of the CRC error guage,
Rate Interval = ( Units * Value ). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsCarrierSenseRateUnits |
1.3.6.1.4.1.43.9.5.9.1.6 |
UNITS that, along with Rate value, determine the Rate
Interval Rate Interval = ( Units * Value ) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), microseconds(2), milliseconds(3), seconds(4), minutes(5), hours(6), days(7) |
|
ecsCarrierSenseHysteresisValue |
1.3.6.1.4.1.43.9.5.9.1.7 |
Specifies the value to which the carrier sense error guage
must fall before another crossing of the threshold results
in a trap. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCSlotStatisticsEntry |
1.3.6.1.4.1.43.9.5.10.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCSlotStatisticsEntry |
|
|
ecsRLCSlotIndex |
1.3.6.1.4.1.43.9.5.10.1.1 |
The slot number of the Repeater Line Card. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCGoodRcvdFrames |
1.3.6.1.4.1.43.9.5.10.1.2 |
The number of readable frames received by this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCTotalByteCount |
1.3.6.1.4.1.43.9.5.10.1.3 |
The number of readable octets received by this Repeater Line Card. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCTotalErrorCount |
1.3.6.1.4.1.43.9.5.10.1.4 |
The total number of errors received on this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCTotalBroadcasts |
1.3.6.1.4.1.43.9.5.10.1.5 |
The total number of broadcast frames received on this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCTotalMulticasts |
1.3.6.1.4.1.43.9.5.10.1.6 |
The total number of multicast frames received on this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCSlotErrorEntry |
1.3.6.1.4.1.43.9.5.11.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCSlotErrorEntry |
|
|
ecsRLCErrorSlotIndex |
1.3.6.1.4.1.43.9.5.11.1.1 |
The slot number of the Repeater Line Card for which these
error statistics pertain. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCCollisionsCount |
1.3.6.1.4.1.43.9.5.11.1.2 |
The total number of Collisions Reported for this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCPartitions |
1.3.6.1.4.1.43.9.5.11.1.3 |
The total number of Partitions Reported for this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCCarrierSenseErrors |
1.3.6.1.4.1.43.9.5.11.1.4 |
The total number of Carrier Sense erros reported for this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCAlignErrors |
1.3.6.1.4.1.43.9.5.11.1.5 |
The total number of Alignement errors Reported for this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCCRCErrors |
1.3.6.1.4.1.43.9.5.11.1.6 |
The total number of CRC errors reported for this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCJabberErrors |
1.3.6.1.4.1.43.9.5.11.1.7 |
The total number of jabber errors reported for this slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsHubTotalByteCount |
1.3.6.1.4.1.43.9.8.2 |
The number of readable octets received by this hub. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsHubTotalErrorCount |
1.3.6.1.4.1.43.9.8.3 |
The total number of errored packets detected on the hub. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsHubTotalBroadcasts |
1.3.6.1.4.1.43.9.8.4 |
The total number of brodcast packets detected on the hub. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsHubTotalMultiFrames |
1.3.6.1.4.1.43.9.8.5 |
The total number of multicast packets detected on the hub. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsHubTotalPartitions |
1.3.6.1.4.1.43.9.8.7 |
The total number of Partitions Reported for this hub. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsHubTotalAlignErrors |
1.3.6.1.4.1.43.9.8.9 |
The total number of Alignement errors reported for this hub. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsHubTotalCRCErrors |
1.3.6.1.4.1.43.9.8.10 |
The total number of CRC errors reported for this hub. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsHubTotalJabberErrors |
1.3.6.1.4.1.43.9.8.11 |
The total number of jabber errors reported for this hub. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ecsRLCNumbOfSLEntries |
1.3.6.1.4.1.43.9.6.2 |
Tok_String |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCSLDataBaseStatus |
1.3.6.1.4.1.43.9.6.3 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
changed(1), unchanged(2), clear(3), full(4) |
|
ecsRLCSLowFilterAddress |
1.3.6.1.4.1.43.9.6.4 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ecsRLCStationLocateEntry |
1.3.6.1.4.1.43.9.6.6.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCStationLocateEntry |
|
|
ecsRLCSLAddress |
1.3.6.1.4.1.43.9.6.6.1.1 |
The MAC Address for which one wishes to locate the
slot and port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ecsRLCSLSlotIndex |
1.3.6.1.4.1.43.9.6.6.1.2 |
The slot number for this MAC address declared in
ecsRLCStationAddress. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCSLPortIndex |
1.3.6.1.4.1.43.9.6.6.1.3 |
The port number for this MAC address declared in
ecsRLCStationAddress. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCSLStatus |
1.3.6.1.4.1.43.9.6.6.1.4 |
Writing clear(1) will clear the entry in the LinkBuilder ECS DataBase. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
clear(1) |
|
ecsRLCNewStationLocateEntry |
1.3.6.1.4.1.43.9.6.7.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSRLCNewStationLocateEntry |
|
|
ecsRLCNewSLAddress |
1.3.6.1.4.1.43.9.6.7.1.1 |
The MAC Address for which one wishes to locate the
slot and port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ecsRLCNewSLSlotIndex |
1.3.6.1.4.1.43.9.6.7.1.2 |
The slot number for this MAC address declared in
ecsRLCNewSLAddress. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsRLCNewSLPortIndex |
1.3.6.1.4.1.43.9.6.7.1.3 |
The port number for this MAC address declared in
ecsRLCNewSLAddress. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
xecsDummyTable |
1.3.6.1.4.1.43.9.255.1 |
A dummy table which allows management
of all tables (an snm bug). |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ECSDummyEntry |
|
ecsDummyEntry |
1.3.6.1.4.1.43.9.255.1.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ECSDummyEntry |
|
|
ecsDummyIndex |
1.3.6.1.4.1.43.9.255.1.1.1 |
Tok_String |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ecsDummyValue |
1.3.6.1.4.1.43.9.255.1.1.2 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
powerSupplyFailure |
0 |
One of the PSUs has failed, the value of ecsPSUStatus is
returned to indicate which PSU has failed. |
TRAP-TYPE |
|
|
|
fanFailure |
1 |
A LinkBuilder ECS Fan has failed, requiring
immediate attenstion. |
TRAP-TYPE |
|
|
|
configurationChanged |
2 |
The LinkBuilder ECS configuartion has changed. Either a card has
been added or removed, a port disabled or enabled from the front
panel or a AUI port has been selected/deselected. |
TRAP-TYPE |
|
|
|
portTrap |
3 |
A port has partitioned/unpartitioned or has changed link state. The
values of ecsInfoSlotIndex and ecsInfoPortIndex are returned to
indicate the slot and port, the ecsPortErrorState is returned to
indicate the type or port error. |
TRAP-TYPE |
|
|
|
resilientLinkTrap |
4 |
The LinkBuilder ECS Resilient Link system has operated.
The resilient link is returned to determine the action taken. |
TRAP-TYPE |
|
|
|
rateTrap |
5 |
A Guage threshold has been exceeded. The slot and port number
are given by the vakues if ecsInfoSlotIndex and ecsInfoPortIndex
and the guage that has been exceeded is given by the value of
ecsPortErrorState. |
TRAP-TYPE |
|
|
|
stationlocateTrap |
6 |
The Station Locate databse has either changed or has become
full. The particular condition is shown by the value of
ecsRLCSLDataBAseStatus returned. |
TRAP-TYPE |
|
|
|
secureRLCTrap |
7 |
There has been access to the security menus from the front panel
menus. The value of ecsAgentSecureManagementStatus reports
whether the trap was generated beacuse the security menus were
entered, the secure password was violated or the security
configuration has been changed. |
TRAP-TYPE |
|
|
|
secureRLCportTrap |
8 |
A secure port has either detected an authorised port and taken
appropriate action or has learnt an authorised station on the
slot and port indicated. |
TRAP-TYPE |
|
|
|