LANPLEX-MIB-1-2-9

File: LANPLEX-MIB-1-2-9.mib (103936 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises Counter NetworkAddress
DisplayString OBJECT-TYPE TRAP-TYPE

Defined Types

SlotEntry  
SEQUENCE    
  slotIndex INTEGER
  slotBoardType INTEGER
  slotBoardRevision OCTET STRING
  slotBoardStatus INTEGER
  slotBoardName DisplayString
  slotBoardNameAbbrev DisplayString
  slotBoardAction INTEGER

SPMEntry  
SEQUENCE    
  spmSlotIndex INTEGER
  spmEthernetPortCount INTEGER
  spmBaseEthernetPortIndex INTEGER

FEAMEntry  
SEQUENCE    
  feamSlotIndex INTEGER
  feamMACCount INTEGER
  feamBaseMACIndex INTEGER
  feamPortCount INTEGER
  feamBasePortIndex INTEGER

FCMEntry  
SEQUENCE    
  fcmSlotIndex INTEGER
  fcmPortCount INTEGER
  fcmBasePortIndex INTEGER

PortEntry  
SEQUENCE    
  portSlotIndex INTEGER
  portIndex INTEGER
  portLabel DisplayString

EEMEntry  
SEQUENCE    
  eemSlotIndex INTEGER
  eemFddiMACCount INTEGER
  eemBaseFddiMACIndex INTEGER
  eemEthernetPortCount INTEGER
  eemBaseEthernetPortIndex INTEGER
  eemAddressThreshold INTEGER

EEMFddiMACEntry  
SEQUENCE    
  eemFddiSlotIndex INTEGER
  eemFddiMACIndex INTEGER
  eemFddiMACForwardedCts Counter
  eemFddiMACDroppedCts Counter

EEMEthernetPortEntry  
SEQUENCE    
  eemEthernetPortSlotIndex INTEGER
  eemEthernetPortIndex INTEGER
  eemEthernetPortLabel DisplayString
  eemEthernetPortForwardedCts Counter
  eemEthernetPortDroppedCts Counter
  eemEthernetPortUTurnCts Counter
  eemEthernetPortState INTEGER
  eemEthernetPortAction INTEGER

EEMEthernetMACAddressEntry  
SEQUENCE    
  eemEthernetMACAddressSlotIndex INTEGER
  eemEthernetMACAddressPortIndex INTEGER
  eemEthernetMACAddressIndex INTEGER
  eemEthernetMACAddressType INTEGER
  eemEthernetMACAddressRemoteAddress OCTET STRING
  eemEthernetMACAddressIsStatic INTEGER
  eemEthernetMACAddressStaticPort INTEGER
  eemEthernetMACAddressAge INTEGER

LpSlotEntry  
SEQUENCE    
  lpSlotIndex INTEGER
  lpSlotBoardType INTEGER
  lpSlotBoardRevision OCTET STRING
  lpSlotBoardStatus INTEGER
  lpSlotBoardName DisplayString
  lpSlotBoardNameAbbrev DisplayString
  lpSlotFddiMacCount INTEGER
  lpSlotFddiMacBaseIndex INTEGER
  lpSlotFddiPortCount INTEGER
  lpSlotFddiPortBaseIndex INTEGER
  lpSlotEthernetPortCount INTEGER
  lpSlotEthernetPortBaseIndex INTEGER
  lpSlotExpressFunctionCount INTEGER
  lpSlotExpressFunctionBaseIndex INTEGER
  lpSlotExpressFddiPortCount INTEGER
  lpSlotExpressFddiPortBaseIndex INTEGER
  lpSlotExpressEthernetPortCount INTEGER
  lpSlotExpressEthernetPortBaseIndex INTEGER
  lpSlotBoardAction INTEGER
  lpSlotBridgeFunctionCount INTEGER
  lpSlotBridgeFunctionBaseIndex INTEGER

LpFddiMacEntry  
SEQUENCE    
  lpFddiMacIndex INTEGER
  lpFddiMacSlotIndex INTEGER
  lpFddiMacLocalIndex INTEGER
  lpFddiMacByteReceiveRate INTEGER
  lpFddiMacPeakByteReceiveRate INTEGER
  lpFddiMacFrameReceiveRate INTEGER
  lpFddiMacPeakFrameReceiveRate INTEGER
  lpFddiMacByteTransmitRate INTEGER
  lpFddiMacPeakByteTransmitRate INTEGER
  lpFddiMacFrameTransmitRate INTEGER
  lpFddiMacPeakFrameTransmitRate INTEGER
  lpFddiMacReceiveMulticastThreshold INTEGER
  lpFddiMacBeaconHistory OCTET STRING

LpEthernetPortEntry  
SEQUENCE    
  lpEthernetPortIndex INTEGER
  lpEthernetPortSlotIndex INTEGER
  lpEthernetPortLocalIndex INTEGER
  lpEthernetPortLabel DisplayString
  lpEthernetPortChipsetType INTEGER
  lpEthernetPortLinkStatus INTEGER
  lpEthernetPortByteReceiveRate INTEGER
  lpEthernetPortPeakByteReceiveRate INTEGER
  lpEthernetPortFrameReceiveRate INTEGER
  lpEthernetPortPeakFrameReceiveRate INTEGER
  lpEthernetPortByteTransmitRate INTEGER
  lpEthernetPortPeakByteTransmitRate INTEGER
  lpEthernetPortFrameTransmitRate INTEGER
  lpEthernetPortPeakFrameTransmitRate INTEGER
  lpEthernetPortReceiveMulticastThreshold INTEGER
  lpEthernetPortType INTEGER

LpFddiPortEntry  
SEQUENCE    
  lpFddiPortIndex INTEGER
  lpFddiPortSlotIndex INTEGER
  lpFddiPortLocalIndex INTEGER
  lpFddiPortLabel DisplayString

LpExpressEntry  
SEQUENCE    
  lpExpressIndex INTEGER
  lpExpressSlotIndex INTEGER
  lpExpressLocalIndex INTEGER
  lpExpressAddressThreshold INTEGER

LpExpressFddiPortEntry  
SEQUENCE    
  lpExpressFddiPortIndex INTEGER
  lpExpressFddiPortSlotIndex INTEGER
  lpExpressFddiPortLocalIndex INTEGER
  lpExpressFddiPortForwardedCts Counter
  lpExpressFddiPortDroppedCts Counter

LpExpressEthernetPortEntry  
SEQUENCE    
  lpExpressEthernetPortIndex INTEGER
  lpExpressEthernetPortSlotIndex INTEGER
  lpExpressEthernetPortLocalIndex INTEGER
  lpExpressEthernetPortForwardedCts Counter
  lpExpressEthernetPortDroppedCts Counter
  lpExpressEthernetPortUTurnCts Counter
  lpExpressEthernetPortAction INTEGER

LpExpressEthernetPortAddressEntry  
SEQUENCE    
  lpExpressEthernetPortAddressPortIndex INTEGER
  lpExpressEthernetPortAddressIndex INTEGER
  lpExpressEthernetPortAddressSlotIndex INTEGER
  lpExpressEthernetPortAddressType INTEGER
  lpExpressEthernetPortAddressRemoteAddress OCTET STRING
  lpExpressEthernetPortAddressIsStatic INTEGER
  lpExpressEthernetPortAddressStaticPort INTEGER
  lpExpressEthernetPortAddressAge INTEGER

LpPowerSupplyEntry  
SEQUENCE    
  lpPowerSupplyIndex INTEGER
  lpPowerSupplyLocation INTEGER
  lpPowerSupplyStatus INTEGER
  lpPowerSupplyFailureType INTEGER
  lpPowerSupplyLastFailure INTEGER

LpBridgeEntry  
SEQUENCE    
  lpBridgeIndex INTEGER
  lpBridgeBaseSlotIndex INTEGER
  lpBridgePortCount INTEGER
  lpBridgeAddressTableSize INTEGER
  lpBridgeAddressThreshold INTEGER
  lpBridgeMode INTEGER
  lpBridgeLocalIndex INTEGER

LpBridgePortEntry  
SEQUENCE    
  lpBridgePortBridgeIndex INTEGER
  lpBridgePortIndex INTEGER
  lpBridgePortSlotIndex INTEGER
  lpBridgePortLocalIndex INTEGER
  lpBridgePortType INTEGER
  lpBridgePortIpFragmentationEnabled INTEGER
  lpBridgePortReceiveMulticastLimit INTEGER
  lpBridgePortAddressAction INTEGER
  lpBridgePortTotalForwardedCts Counter
  lpBridgePortManagementFramesReceived Counter
  lpBridgePortTotalDiscards Counter
  lpBridgePortReceiveBlockedDiscards Counter
  lpBridgePortReceiveMulticastLimitExceededs Counter
  lpBridgePortReceiveSecurityDiscards Counter
  lpBridgePortReceiveUnknownDiscards Counter
  lpBridgePortReceiveOtherDiscards Counter
  lpBridgePortReceiveErrorDiscards Counter
  lpBridgePortSameSegmentDiscards Counter
  lpBridgePortTransmitBlockedDiscards Counter
  lpBridgePortTotalFiltered Counter
  lpBridgePortReceiveUnicastFiltered Counter
  lpBridgePortReceiveMulticastFiltered Counter
  lpBridgePortTransmitUnicastFiltered Counter
  lpBridgePortTransmitMulticastFiltered Counter
  lpBridgePortReceiveMulticastLimitExceededCount Counter

LpBridgePortForwardedToEntry  
SEQUENCE    
  lpBridgePortForwardedToBridgeIndex INTEGER
  lpBridgePortForwardedToReceivePortIndex INTEGER
  lpBridgePortForwardedToDstPortIndex INTEGER
  lpBridgePortForwardedToCount Counter

LpBridgePortFilteredToEntry  
SEQUENCE    
  lpBridgePortFilteredToBridgeIndex INTEGER
  lpBridgePortFilteredToReceivePortIndex INTEGER
  lpBridgePortFilteredToDstPortIndex INTEGER
  lpBridgePortFilteredToCount Counter

LpBridgePortAddressEntry  
SEQUENCE    
  lpBridgePortAddressBridgeIndex INTEGER
  lpBridgePortAddressPortIndex INTEGER
  lpBridgePortAddressIndex INTEGER
  lpBridgePortAddressRemoteAddress OCTET STRING
  lpBridgePortAddressType INTEGER
  lpBridgePortAddressIsStatic INTEGER
  lpBridgePortAddressStaticPort INTEGER
  lpBridgePortAddressAge INTEGER

LpTrapEnterpriseTableEntry  
SEQUENCE    
  lpTrapEnterpriseIndex INTEGER
  lpTrapEnterpriseOID OBJECT IDENTIFIER

LpTrapDestTableEntry  
SEQUENCE    
  lpTrapDestAddr NetworkAddress
  lpTrapDestEnterpriseIndex INTEGER
  lpTrapNumber INTEGER
  lpTrapEntryStatus INTEGER

Defined Values

synernetics 1.3.6.1.4.1.114
OBJECT IDENTIFIER    

lanplex 1.3.6.1.4.1.114.1
OBJECT IDENTIFIER    

lanplexMib 1.3.6.1.4.1.114.1.1
OBJECT IDENTIFIER    

chassis 1.3.6.1.4.1.114.1.1.1
OBJECT IDENTIFIER    

slot 1.3.6.1.4.1.114.1.1.2
OBJECT IDENTIFIER    

spm 1.3.6.1.4.1.114.1.1.3
OBJECT IDENTIFIER    

feam 1.3.6.1.4.1.114.1.1.4
OBJECT IDENTIFIER    

fcm 1.3.6.1.4.1.114.1.1.5
OBJECT IDENTIFIER    

port 1.3.6.1.4.1.114.1.1.6
OBJECT IDENTIFIER    

eem 1.3.6.1.4.1.114.1.1.7
OBJECT IDENTIFIER    

eemFddiMAC 1.3.6.1.4.1.114.1.1.8
OBJECT IDENTIFIER    

eemEthernetPort 1.3.6.1.4.1.114.1.1.9
OBJECT IDENTIFIER    

eemMACAddress 1.3.6.1.4.1.114.1.1.10
OBJECT IDENTIFIER    

lpSystem 1.3.6.1.4.1.114.1.1.11
OBJECT IDENTIFIER    

lpSlot 1.3.6.1.4.1.114.1.1.12
OBJECT IDENTIFIER    

lpFddiMac 1.3.6.1.4.1.114.1.1.13
OBJECT IDENTIFIER    

lpEthernetPort 1.3.6.1.4.1.114.1.1.14
OBJECT IDENTIFIER    

lpFddiPort 1.3.6.1.4.1.114.1.1.15
OBJECT IDENTIFIER    

lpExpress 1.3.6.1.4.1.114.1.1.16
OBJECT IDENTIFIER    

lpExpressFddiPort 1.3.6.1.4.1.114.1.1.17
OBJECT IDENTIFIER    

lpExpressEthernetPort 1.3.6.1.4.1.114.1.1.18
OBJECT IDENTIFIER    

lpExpressEthernetPortAddress 1.3.6.1.4.1.114.1.1.19
OBJECT IDENTIFIER    

lpPowerSupply 1.3.6.1.4.1.114.1.1.20
OBJECT IDENTIFIER    

lpBridge 1.3.6.1.4.1.114.1.1.21
OBJECT IDENTIFIER    

lpTrapEnterprise 1.3.6.1.4.1.114.1.1.22
OBJECT IDENTIFIER    

lpTrapDest 1.3.6.1.4.1.114.1.1.23
OBJECT IDENTIFIER    

chassisId 1.3.6.1.4.1.114.1.1.1.1
The unique identifier assigned to this station during manufacturing.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

chassisType 1.3.6.1.4.1.114.1.1.1.2
The type of the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER other(1), tweleveSlot(2), fourSlot(3)  

chassisRevision 1.3.6.1.4.1.114.1.1.1.3
The revision number of the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

chassisName 1.3.6.1.4.1.114.1.1.1.4
The text string describing this chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisNameAbbrev 1.3.6.1.4.1.114.1.1.1.5
The text string describing the generic name for this chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisManufacturer 1.3.6.1.4.1.114.1.1.1.6
The text string describing the manufacturer of this chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisSlotCount 1.3.6.1.4.1.114.1.1.1.7
The number of slots in the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

chassisBuildTime 1.3.6.1.4.1.114.1.1.1.8
The build time of the LANplex system software.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

chassisSoftwareRevision 1.3.6.1.4.1.114.1.1.1.9
The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental idenrtifier.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

chassisControlPanelColumns 1.3.6.1.4.1.114.1.1.1.10
The number of columns in the control panel display.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

chassisControlPanelLines 1.3.6.1.4.1.114.1.1.1.11
The number of lines in the control panel display.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

chassisControlPanelText 1.3.6.1.4.1.114.1.1.1.12
The currently displayed text in the control panel display.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

chassisAction 1.3.6.1.4.1.114.1.1.1.13
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LANplex system.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

slotTable 1.3.6.1.4.1.114.1.1.2.1
A list of slot entries. A single instance of this object exists for each slot in the LANplex chassis.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlotEntry

slotEntry 1.3.6.1.4.1.114.1.1.2.1.1
A slot entry contains information common to a given slot within a LANplex system Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SlotEntry  

slotIndex 1.3.6.1.4.1.114.1.1.2.1.1.1
The physical slot number of this slot within the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

slotBoardType 1.3.6.1.4.1.114.1.1.2.1.1.2
The type of board residing in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), emptySlot(2), spm(3), feam(4), fcm(5), eem(6), esm(7), fcm2(8)  

slotBoardRevision 1.3.6.1.4.1.114.1.1.2.1.1.3
The revision number of the board in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

slotBoardStatus 1.3.6.1.4.1.114.1.1.2.1.1.4
The status of the board in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER notPresent(1), testing(2), offline(3), online(4)  

slotBoardName 1.3.6.1.4.1.114.1.1.2.1.1.5
The text string describing this board type.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

slotBoardNameAbbrev 1.3.6.1.4.1.114.1.1.2.1.1.6
The abbreviation used to describe this board type.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slotBoardAction 1.3.6.1.4.1.114.1.1.2.1.1.7
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER other(1), runDiagnostics(2)  

spmTable 1.3.6.1.4.1.114.1.1.3.1
A list of System Processor Module (SPM) entries. An entry exists for each Slot Table Entry whose board type is SPM. This table is indexed by the physical slot number of this SPM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SPMEntry

spmEntry 1.3.6.1.4.1.114.1.1.3.1.1
A SPM entry contains information common to a single System Processor Module (SPM) within a LANplex system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SPMEntry  

spmSlotIndex 1.3.6.1.4.1.114.1.1.3.1.1.1
The physical slot number of this slot within the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

spmEthernetPortCount 1.3.6.1.4.1.114.1.1.3.1.1.2
The number of ethernet ports on this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

spmBaseEthernetPortIndex 1.3.6.1.4.1.114.1.1.3.1.1.3
The system-wide index for the first ethernet port on this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

feamTable 1.3.6.1.4.1.114.1.1.4.1
A list of FDDI Enterprise Access Module (FEAM) entries. An entry exists for each Slot Table Entry whose board type is FEAM. This table is indexed by the physical slot number of this FEAM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FEAMEntry

feamEntry 1.3.6.1.4.1.114.1.1.4.1.1
A FEAM entry contains information common to a single FDDI Enterprise Access Module (FEAM) within a LANplex system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  FEAMEntry  

feamSlotIndex 1.3.6.1.4.1.114.1.1.4.1.1.1
The physical slot number of this slot within the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

feamMACCount 1.3.6.1.4.1.114.1.1.4.1.1.2
The number of FDDI MAC's present on this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

feamBaseMACIndex 1.3.6.1.4.1.114.1.1.4.1.1.3
The system-wide index of the first FDDI MAC on this board. Additional MAC's on this board will have consecutively increasing MAC indices following this index.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

feamPortCount 1.3.6.1.4.1.114.1.1.4.1.1.4
The number of FDDI ports present on this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

feamBasePortIndex 1.3.6.1.4.1.114.1.1.4.1.1.5
The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing Port indices following this index.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

fcmTable 1.3.6.1.4.1.114.1.1.5.1
A list of FDDI Concentration Module (FCM) entries. An entry exists for each Slot Table Entry whose board type is FCM. This table is indexed by the physical slot number of this FCM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FCMEntry

fcmEntry 1.3.6.1.4.1.114.1.1.5.1.1
An FCM entry contains information common to a single FDDI Concentration Module (FCM) within a LANplex system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  FCMEntry  

fcmSlotIndex 1.3.6.1.4.1.114.1.1.5.1.1.1
The physical slot number of this slot within the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

fcmPortCount 1.3.6.1.4.1.114.1.1.5.1.1.2
The number of FDDI ports present on this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

fcmBasePortIndex 1.3.6.1.4.1.114.1.1.5.1.1.3
The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing Port indices following this index.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

portTable 1.3.6.1.4.1.114.1.1.6.1
A list of port entries. A single instance of this object exists for each port (excluding ethernet ports) in the LANplex system. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available either via the fddiPort group or the enetPort group.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.114.1.1.6.1.1
A Port entry contains information common to a particular port located on a particular board within the LANplex system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  PortEntry  

portSlotIndex 1.3.6.1.4.1.114.1.1.6.1.1.1
The physical slot number of this slot within the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

portIndex 1.3.6.1.4.1.114.1.1.6.1.1.2
The index of the port on a particular slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

portLabel 1.3.6.1.4.1.114.1.1.6.1.1.3
An ASCII text string describing this port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eemTable 1.3.6.1.4.1.114.1.1.7.1
A list of Ethernet Express Module (EEM) entries. An entry exists for each Slot Table Entry whose board type is EEM. This table is indexed by the physical slot number of this EEM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available either via the slot group or the express group.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EEMEntry

eemEntry 1.3.6.1.4.1.114.1.1.7.1.1
An EEM entry contains information common to a single Ethernet Express Module (EEM) within a LANplex system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  EEMEntry  

eemSlotIndex 1.3.6.1.4.1.114.1.1.7.1.1.1
The physical slot number of this slot within the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemFddiMACCount 1.3.6.1.4.1.114.1.1.7.1.1.2
The number of FDDI MAC's present on this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemBaseFddiMACIndex 1.3.6.1.4.1.114.1.1.7.1.1.3
The system-wide index of the first FDDI MAC on this board. Additional FDDI MAC's on this board will have consecutively increasing MAC indices following this index.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemEthernetPortCount 1.3.6.1.4.1.114.1.1.7.1.1.4
The number of Ethernet ports present on this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemBaseEthernetPortIndex 1.3.6.1.4.1.114.1.1.7.1.1.5
The system-wide index of the first ethernet port on this board. Additional ports on this board will have consecutively increasing Port indices following this index.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemAddressThreshold 1.3.6.1.4.1.114.1.1.7.1.1.6
A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached the event eemAddressThresholdEvent is generated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

eemFddiMACTable 1.3.6.1.4.1.114.1.1.8.1
A list of EEM FDDI MAC entries. The entries may not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressFddiPort group.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EEMFddiMACEntry

eemFddiMACEntry 1.3.6.1.4.1.114.1.1.8.1.1
An EEM FDDI MAC entry contains information common to an FDDI MAC located on an EEM within a LANplex system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  EEMFddiMACEntry  

eemFddiSlotIndex 1.3.6.1.4.1.114.1.1.8.1.1.1
The physical slot number of this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemFddiMACIndex 1.3.6.1.4.1.114.1.1.8.1.1.2
A unique value for each FDDI MAC on this board.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemFddiMACForwardedCts 1.3.6.1.4.1.114.1.1.8.1.1.3
A counter indicating the number of frames forwarded by a MAC from an ethernet port to the FDDI network.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

eemFddiMACDroppedCts 1.3.6.1.4.1.114.1.1.8.1.1.4
A counter indicating the number of frames that were dropped by a MAC due to local resource limitation or unknown destination MAC address.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

eemEthernetPortTable 1.3.6.1.4.1.114.1.1.9.1
A list of EEM Ethernet Express Port entries. The slot indices may not be consecutive. The MAC indices will be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressEthernetPort group.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EEMEthernetPortEntry

eemEthernetPortEntry 1.3.6.1.4.1.114.1.1.9.1.1
An EEM Ethernet Express Port entry contains information common to an Ethenet Port located on an Ethernet Express Module (EEM) within a LANplex system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  EEMEthernetPortEntry  

eemEthernetPortSlotIndex 1.3.6.1.4.1.114.1.1.9.1.1.1
The physical slot number of the slot containing this port within the LANplex chassis.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemEthernetPortIndex 1.3.6.1.4.1.114.1.1.9.1.1.2
The index of the port on a particular EEM board. This index ranges from 1 to eemEthernetPortCount.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

eemEthernetPortLabel 1.3.6.1.4.1.114.1.1.9.1.1.3
An ASCII text string describing this ethernet port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eemEthernetPortForwardedCts 1.3.6.1.4.1.114.1.1.9.1.1.4
A counter indicating the number of frames forwarded from this ethernet port on to the FDDI network.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

eemEthernetPortDroppedCts 1.3.6.1.4.1.114.1.1.9.1.1.5
A counter indicating the numer of frames received on this port that were dropped due to the fact that the destination MAC address was determined to be on the same ethernet segment as the source MAC address. .
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

eemEthernetPortUTurnCts 1.3.6.1.4.1.114.1.1.9.1.1.6
A counter indicating the number of frames received on this ethernet port and directed to another ethernet port.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

eemEthernetPortState 1.3.6.1.4.1.114.1.1.9.1.1.7
The state of the Ethernet Express port.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER onlineActive(1), onlineInactive(2), offline(3)  

eemEthernetPortAction 1.3.6.1.4.1.114.1.1.9.1.1.8
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

eemEthernetMACAddressTable 1.3.6.1.4.1.114.1.1.10.1
A list of EEM Ethernet Express Remote MAC Address entries. The slot indices may not be consecutive. The port indices will be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressEthernetPort group.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EEMEthernetMACAddressEntry

eemEthernetMACAddressEntry 1.3.6.1.4.1.114.1.1.10.1.1
A collection of information describing a remote Ethernet MAC detected to be attached to an Ethernet Express port.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  EEMEthernetMACAddressEntry  

eemEthernetMACAddressSlotIndex 1.3.6.1.4.1.114.1.1.10.1.1.1
The physical slot number of the slot containing this EEM within the LANplex chassis.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

eemEthernetMACAddressPortIndex 1.3.6.1.4.1.114.1.1.10.1.1.2
The port index of this address entry within the table. This index ranges from 1 to eemEthernetPortCount.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

eemEthernetMACAddressIndex 1.3.6.1.4.1.114.1.1.10.1.1.3
The index of this address entry within the table.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

eemEthernetMACAddressType 1.3.6.1.4.1.114.1.1.10.1.1.4
This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

eemEthernetMACAddressRemoteAddress 1.3.6.1.4.1.114.1.1.10.1.1.5
The remote MAC address detected on this Ethernet Express port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

eemEthernetMACAddressIsStatic 1.3.6.1.4.1.114.1.1.10.1.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned on this port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

eemEthernetMACAddressStaticPort 1.3.6.1.4.1.114.1.1.10.1.1.7
If the object eemEthernetMACAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

eemEthernetMACAddressAge 1.3.6.1.4.1.114.1.1.10.1.1.8
This object indicates the time elapsed since this MAC address was added to this port's address table.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpSystemId 1.3.6.1.4.1.114.1.1.11.1
The unique identifier assigned to this system during manufacturing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemType 1.3.6.1.4.1.114.1.1.11.2
The type of the LANplex system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), tweleveSlot(2), fourSlot(3)  

lpSystemName 1.3.6.1.4.1.114.1.1.11.3
The text string describing this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

lpSystemManufacturer 1.3.6.1.4.1.114.1.1.11.4
The text string describing the manufacturer of this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

lpSystemBackplaneRevision 1.3.6.1.4.1.114.1.1.11.5
The revision level of the system backplane. Bits 6 and 7 indicate the artwork revision. Bits 0 through 5 indicate the rework level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

lpSystemSlotCount 1.3.6.1.4.1.114.1.1.11.6
The number of slots in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemMemorySize 1.3.6.1.4.1.114.1.1.11.7
The amount of memory (RAM), in bytes, present on the system processor board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemFlashMemorySize 1.3.6.1.4.1.114.1.1.11.8
The amount of flash memory, in bytes, present on the system processor board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemNvMemorySize 1.3.6.1.4.1.114.1.1.11.9
The amount of non-volatile memory, in bytes, present on the system processor board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemSoftwareRevision 1.3.6.1.4.1.114.1.1.11.10
The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

lpSystemBuildTime 1.3.6.1.4.1.114.1.1.11.11
The build time of the system software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

lpSystemControlPanelHardwareRevision 1.3.6.1.4.1.114.1.1.11.12
An 8-bit value specifying the revision level of the control panel hardware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

lpSystemControlPanelSoftwareRevision 1.3.6.1.4.1.114.1.1.11.13
An 8-bit value specifying the revision level of the control panel software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

lpSystemControlPanelLines 1.3.6.1.4.1.114.1.1.11.14
The number of lines in the control panel display.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemControlPanelColumns 1.3.6.1.4.1.114.1.1.11.15
The number of columns in the control panel display.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemControlPanelText 1.3.6.1.4.1.114.1.1.11.16
The currently displayed text in the control panel display.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

lpSystemFddiMacCount 1.3.6.1.4.1.114.1.1.11.17
The number of FDDI MAC's present in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemFddiPortCount 1.3.6.1.4.1.114.1.1.11.18
The number of FDDI ports present in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemEthernetPortCount 1.3.6.1.4.1.114.1.1.11.19
The number of ethernet ports present in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemExpressFunctionCount 1.3.6.1.4.1.114.1.1.11.20
The number of Ethernet Express functions present in the system. Curently this value is equal to the number of Express boards present in the system.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemExpressFddiPortCount 1.3.6.1.4.1.114.1.1.11.21
The number of Ethernet Express FDDI ports present in the system.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemExpressEthernetPortCount 1.3.6.1.4.1.114.1.1.11.22
The number of Ethernet Express ethernet ports present in the system.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemPowerSupplyCount 1.3.6.1.4.1.114.1.1.11.23
The number of power supply units present in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemAction 1.3.6.1.4.1.114.1.1.11.24
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LANplex system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

lpSystemBridgeFunctionCount 1.3.6.1.4.1.114.1.1.11.25
The number of bridge functions present in the system. Curently this value is equal to the sum of the number of Express and Switching modules in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSystemSmtProxyTimeoutBase 1.3.6.1.4.1.114.1.1.11.26
The initial timeout value, in seconds, before the SMT proxy attempts to backoff and retry. Since the SMT proxy will attempt three retries before determining that the proxied station is not answering, with the timeout doubling for each retry, the total time for a request to time out is equal to seven times the base timeout value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

lpSystemSmtProxyEvents 1.3.6.1.4.1.114.1.1.11.27
This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy will generate traps for all SMT events, those that occur locally, and those that occur at other stations. If disabled, the SMT proxy will only generate traps for events which occur locally. The default value for this object is enabled(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

lpSlotTable 1.3.6.1.4.1.114.1.1.12.1
A list of slot entries. A single instance of this object exists for each slot in the LANplex system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpSlotEntry

lpSlotEntry 1.3.6.1.4.1.114.1.1.12.1.1
A slot entry contains information common to a given slot within a LANplex system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpSlotEntry  

lpSlotIndex 1.3.6.1.4.1.114.1.1.12.1.1.1
The physical slot number of this slot within the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotBoardType 1.3.6.1.4.1.114.1.1.12.1.1.2
The type of board residing in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), emptySlot(2), spm(3), feam(4), fcm(5), eem(6), esm(7), fcm2(8)  

lpSlotBoardRevision 1.3.6.1.4.1.114.1.1.12.1.1.3
The revision number of the board in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

lpSlotBoardStatus 1.3.6.1.4.1.114.1.1.12.1.1.4
The status of the board in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notPresent(1), testing(2), offline(3), online(4)  

lpSlotBoardName 1.3.6.1.4.1.114.1.1.12.1.1.5
The text string describing this board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

lpSlotBoardNameAbbrev 1.3.6.1.4.1.114.1.1.12.1.1.6
The abbreviation used to describe this board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

lpSlotFddiMacCount 1.3.6.1.4.1.114.1.1.12.1.1.7
The number of FDDI MAC's present in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotFddiMacBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.8
The index of the first FDDI MAC in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotFddiPortCount 1.3.6.1.4.1.114.1.1.12.1.1.9
The number of FDDI ports present in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotFddiPortBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.10
The index of the first FDDI port in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotEthernetPortCount 1.3.6.1.4.1.114.1.1.12.1.1.11
The number of ethernet ports present in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotEthernetPortBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.12
The index of the first ethernet port in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotExpressFunctionCount 1.3.6.1.4.1.114.1.1.12.1.1.13
The number of Express functions present in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotExpressFunctionBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.14
The index of the first Express function in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotExpressFddiPortCount 1.3.6.1.4.1.114.1.1.12.1.1.15
The number of Express FDDI ports present in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotExpressFddiPortBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.16
The index of the first Express FDDI port in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotExpressEthernetPortCount 1.3.6.1.4.1.114.1.1.12.1.1.17
The number of Express ethernet ports present in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotExpressEthernetPortBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.18
The index of the first Express ethernet port in this slot.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotBoardAction 1.3.6.1.4.1.114.1.1.12.1.1.19
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), runDiagnostics(2)  

lpSlotBridgeFunctionCount 1.3.6.1.4.1.114.1.1.12.1.1.20
The number of bridge functions present in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpSlotBridgeFunctionBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.21
The index of the first bridge function in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacTable 1.3.6.1.4.1.114.1.1.13.1
A list of FDDI MAC entries. A single instance of this object exists for each FDDI MAC present in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpFddiMacEntry

lpFddiMacEntry 1.3.6.1.4.1.114.1.1.13.1.1
An FDDI MAC entry contains information common to a particular FDDI MAC within the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpFddiMacEntry  

lpFddiMacIndex 1.3.6.1.4.1.114.1.1.13.1.1.1
A unique value for each FDDI MAC in the system. The MAC identified by a particular value of this index is the same MAC as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacSlotIndex 1.3.6.1.4.1.114.1.1.13.1.1.2
The slot number corresponding to the physical location of this MAC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacLocalIndex 1.3.6.1.4.1.114.1.1.13.1.1.3
The index of this MAC relative to the slot on which it is physically present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacByteReceiveRate 1.3.6.1.4.1.114.1.1.13.1.1.4
The average number of bytes received per second by this MAC during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacPeakByteReceiveRate 1.3.6.1.4.1.114.1.1.13.1.1.5
The peak value of lpFddiMacByteReceiveRate for this MAC since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacFrameReceiveRate 1.3.6.1.4.1.114.1.1.13.1.1.6
The average number of frames received per second by this MAC during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacPeakFrameReceiveRate 1.3.6.1.4.1.114.1.1.13.1.1.7
The peak value of lpFddiMacFrameReceiveRate for this MAC since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacByteTransmitRate 1.3.6.1.4.1.114.1.1.13.1.1.8
The average number of bytes transmitted per second by this MAC during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacPeakByteTransmitRate 1.3.6.1.4.1.114.1.1.13.1.1.9
The peak value of lpFddiMacByteTransmitRate for this MAC since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacFrameTransmitRate 1.3.6.1.4.1.114.1.1.13.1.1.10
The average number of frames transmitted per second by this MAC during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacPeakFrameTransmitRate 1.3.6.1.4.1.114.1.1.13.1.1.11
The peak value of lpFddiMacFrameTransmitRate for this MAC since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiMacReceiveMulticastThreshold 1.3.6.1.4.1.114.1.1.13.1.1.12
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpFddiMacBeaconHistory 1.3.6.1.4.1.114.1.1.13.1.1.13
This object gives a history of the most recent beacon information received on this MAC. It can contain up to a maximum of eight records. Each record is of the form: source MAC: 6 bytes beacon data length: 2 bytes. beacon data: 0-16 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

lpEthernetPortTable 1.3.6.1.4.1.114.1.1.14.1
A list of ethernet port entries. A single instance of this object exists for each ethernet port present in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpEthernetPortEntry

lpEthernetPortEntry 1.3.6.1.4.1.114.1.1.14.1.1
An ethernet port entry contains information common to a particular ethernet port within the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpEthernetPortEntry  

lpEthernetPortIndex 1.3.6.1.4.1.114.1.1.14.1.1.1
A unique value for each ethernet port in the system. The port identified by a particular value of this index is the same port as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortSlotIndex 1.3.6.1.4.1.114.1.1.14.1.1.2
The slot number corresponding to the physical location of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortLocalIndex 1.3.6.1.4.1.114.1.1.14.1.1.3
The index of this port relative to the slot on which it is physically present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortLabel 1.3.6.1.4.1.114.1.1.14.1.1.4
An ASCII text string describing this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

lpEthernetPortChipsetType 1.3.6.1.4.1.114.1.1.14.1.1.5
The type of chipset used to implement this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), chipsetAMD79900(2), chipsetIntel82586(3), chipsetIntel82596(4), chipsetSEEQ8003(5), chipsetNational8390(6), chipsetNationalSonic(7), chipsetFujitsu86950(8)  

lpEthernetPortLinkStatus 1.3.6.1.4.1.114.1.1.14.1.1.6
The current value of the link status for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inActive(2)  

lpEthernetPortByteReceiveRate 1.3.6.1.4.1.114.1.1.14.1.1.7
The average number of bytes received per second by this port during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortPeakByteReceiveRate 1.3.6.1.4.1.114.1.1.14.1.1.8
The peak value of lpEthernetPortByteReceiveRate for this port since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortFrameReceiveRate 1.3.6.1.4.1.114.1.1.14.1.1.9
The average number of frames received per second by this port during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortPeakFrameReceiveRate 1.3.6.1.4.1.114.1.1.14.1.1.10
The peak value of lpEthernetPortFrameReceiveRate for this port since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortByteTransmitRate 1.3.6.1.4.1.114.1.1.14.1.1.11
The average number of bytes transmitted per second by this port during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortPeakByteTransmitRate 1.3.6.1.4.1.114.1.1.14.1.1.12
The peak value of lpEthernetPortByteTransmitRate for this port since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortFrameTransmitRate 1.3.6.1.4.1.114.1.1.14.1.1.13
The average number of frames transmitted per second by this port during the most recent sampling period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortPeakFrameTransmitRate 1.3.6.1.4.1.114.1.1.14.1.1.14
The peak value of lpEthernetPortFrameTransmitRate for this port since the system was last initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpEthernetPortReceiveMulticastThreshold 1.3.6.1.4.1.114.1.1.14.1.1.15
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is four seconds. The default value for this object is zero which implies an infinite rate.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpEthernetPortType 1.3.6.1.4.1.114.1.1.14.1.1.16
Specific description of this port's type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER telco10BaseT(1), rj4510BaseT(2), foirl(3), aui(4), other(5)  

lpFddiPortTable 1.3.6.1.4.1.114.1.1.15.1
A list of FDDI port entries. A single instance of this object exists for each FDDI port in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpFddiPortEntry

lpFddiPortEntry 1.3.6.1.4.1.114.1.1.15.1.1
A Port entry contains information common to a particular FDDI port in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpFddiPortEntry  

lpFddiPortIndex 1.3.6.1.4.1.114.1.1.15.1.1.1
A unique value for each FDDI port in the system. It's value ranges between 1 and the value of lpSystemFddiPortCount.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiPortSlotIndex 1.3.6.1.4.1.114.1.1.15.1.1.2
The slot number corresponding to the physical location of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiPortLocalIndex 1.3.6.1.4.1.114.1.1.15.1.1.3
The index of this port relative to the slot on which it is physically present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpFddiPortLabel 1.3.6.1.4.1.114.1.1.15.1.1.4
An ASCII text string describing this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

lpExpressTable 1.3.6.1.4.1.114.1.1.16.1
A list of Express function entries.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpExpressEntry

lpExpressEntry 1.3.6.1.4.1.114.1.1.16.1.1
An Express entry contains information common to a particular Express function in a given system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  LpExpressEntry  

lpExpressIndex 1.3.6.1.4.1.114.1.1.16.1.1.1
A unique value for each Express function in the system. It's value ranges between 1 and the value of lpSystemExpressFunctionCount.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressSlotIndex 1.3.6.1.4.1.114.1.1.16.1.1.2
The slot number corresponding to the physical location of this function.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressLocalIndex 1.3.6.1.4.1.114.1.1.16.1.1.3
The index of this function relative to the slot on which it is physically present.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressAddressThreshold 1.3.6.1.4.1.114.1.1.16.1.1.4
A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached, the event lpEemAddressThresholdEvent is generated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpExpressFddiPortTable 1.3.6.1.4.1.114.1.1.17.1
A list of Express FDDI port entries.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpExpressFddiPortEntry

lpExpressFddiPortEntry 1.3.6.1.4.1.114.1.1.17.1.1
A Port entry contains information for a particular Express FDDI port in a given system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  LpExpressFddiPortEntry  

lpExpressFddiPortIndex 1.3.6.1.4.1.114.1.1.17.1.1.1
A unique value for each Express port in the system. It's value ranges between 1 and the value of lpSystemExpressFddiPortCount.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressFddiPortSlotIndex 1.3.6.1.4.1.114.1.1.17.1.1.2
The slot number corresponding to the physical location of this port.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressFddiPortLocalIndex 1.3.6.1.4.1.114.1.1.17.1.1.3
The index of this port relative to the slot on which it is physically present.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressFddiPortForwardedCts 1.3.6.1.4.1.114.1.1.17.1.1.4
The number of frames forwarded by this MAC from an ethernet port to the FDDI network.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

lpExpressFddiPortDroppedCts 1.3.6.1.4.1.114.1.1.17.1.1.5
The number of frames received by this MAC that were not forwarded.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

lpExpressEthernetPortTable 1.3.6.1.4.1.114.1.1.18.1
A list of Express ethernet port entries.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpExpressEthernetPortEntry

lpExpressEthernetPortEntry 1.3.6.1.4.1.114.1.1.18.1.1
An Expres ethernet port entry contains information common to a particular Express ethernet port located in the system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  LpExpressEthernetPortEntry  

lpExpressEthernetPortIndex 1.3.6.1.4.1.114.1.1.18.1.1.1
A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lpSystemExpressEthernetPortCount.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortSlotIndex 1.3.6.1.4.1.114.1.1.18.1.1.2
The slot number corresponding to the physical location of this port.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortLocalIndex 1.3.6.1.4.1.114.1.1.18.1.1.3
The index of this port relative to the slot on which it is physically present.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortForwardedCts 1.3.6.1.4.1.114.1.1.18.1.1.4
The number of frames forwarded from this ethernet port to the FDDI network.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

lpExpressEthernetPortDroppedCts 1.3.6.1.4.1.114.1.1.18.1.1.5
The number of frames received by this ethernet port that were not forwarded or u-turned.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

lpExpressEthernetPortUTurnCts 1.3.6.1.4.1.114.1.1.18.1.1.6
The number of frames received by this ethernet port that were directed to another ethernet port.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

lpExpressEthernetPortAction 1.3.6.1.4.1.114.1.1.18.1.1.7
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

lpExpressEthernetPortAddressTable 1.3.6.1.4.1.114.1.1.19.1
A list of Express Remote MAC Address entries.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpExpressEthernetPortAddressEntry

lpExpressEthernetPortAddressEntry 1.3.6.1.4.1.114.1.1.19.1.1
An entry contains information describing a remote Ethernet MAC detected to be attached to an Express port.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  LpExpressEthernetPortAddressEntry  

lpExpressEthernetPortAddressPortIndex 1.3.6.1.4.1.114.1.1.19.1.1.1
A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lpSystemExpressEthernetPortCount.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortAddressIndex 1.3.6.1.4.1.114.1.1.19.1.1.2
The index of this address entry within the address table.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortAddressSlotIndex 1.3.6.1.4.1.114.1.1.19.1.1.3
The slot number corresponding to the physical location of this port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortAddressType 1.3.6.1.4.1.114.1.1.19.1.1.4
This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

lpExpressEthernetPortAddressRemoteAddress 1.3.6.1.4.1.114.1.1.19.1.1.5
The remote MAC address detected on this port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

lpExpressEthernetPortAddressIsStatic 1.3.6.1.4.1.114.1.1.19.1.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned on this port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

lpExpressEthernetPortAddressStaticPort 1.3.6.1.4.1.114.1.1.19.1.1.7
If the object lpExpressEthernetPortAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortAddressAge 1.3.6.1.4.1.114.1.1.19.1.1.8
This object indicates the time, in seconds, elapsed since this MAC address was added to this port's address table.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

lpPowerSupplyTable 1.3.6.1.4.1.114.1.1.20.1
A list of power supply entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpPowerSupplyEntry

lpPowerSupplyEntry 1.3.6.1.4.1.114.1.1.20.1.1
A power supply entry contains information common for a particular power supply unit in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpPowerSupplyEntry  

lpPowerSupplyIndex 1.3.6.1.4.1.114.1.1.20.1.1.1
A unique value for each power supply in the system. It's value ranges between 1 and the value of lpSystemPowerSupplyCount.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpPowerSupplyLocation 1.3.6.1.4.1.114.1.1.20.1.1.2
The physical slot in which this power supply unit resides in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpPowerSupplyStatus 1.3.6.1.4.1.114.1.1.20.1.1.3
The status of the power supply. A value of 0 indicates a working unit. A non-zero value represents a bit mask of the possible failure types. Each set bit indicates the following failure type: bit0: systemAcFailure bit1: systemPlus5Failure bit2: systemPlus12Failure bit3: systemOverTemperatureFailure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpPowerSupplyFailureType 1.3.6.1.4.1.114.1.1.20.1.1.4
This object is sent in the varlist when the lpPowerSupplyFailureEvent trap is generated. It indicates the particular failure type that caused this trap to be generated.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  INTEGER systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4)  

lpPowerSupplyLastFailure 1.3.6.1.4.1.114.1.1.20.1.1.5
This object represents the most recent power supply failure type. If no failure has occured, the value of this object is none. This object is included in the varlist when the lpPowerSupplyFailureEvent trap is generated. It indicates the failure type that caused the trap to be generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4), none(5)  

lpBridgeTable 1.3.6.1.4.1.114.1.1.21.1
A list of bridge function entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgeEntry

lpBridgeEntry 1.3.6.1.4.1.114.1.1.21.1.1
A bridge entry contains information common to a particular bridge function in a given system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpBridgeEntry  

lpBridgeIndex 1.3.6.1.4.1.114.1.1.21.1.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgeBaseSlotIndex 1.3.6.1.4.1.114.1.1.21.1.1.2
The slot number of the lowest numbered slot which contains a physical port that this bridge function controls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortCount 1.3.6.1.4.1.114.1.1.21.1.1.3
The number of ports that this bridge function controls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgeAddressTableSize 1.3.6.1.4.1.114.1.1.21.1.1.4
The size of the address table for this bridge function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgeAddressThreshold 1.3.6.1.4.1.114.1.1.21.1.1.5
A reporting threshold for the total number of addresses known for this board. When this threshold is reached, the event lpBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the value reported by lpBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the value of lpBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of lpBridgeAddressThresholdEvents since the limit will never be reached.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lpBridgeMode 1.3.6.1.4.1.114.1.1.21.1.1.6
The operational mode of this bridge function. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER expressMode(1), ieee8021dBridgeMode(2), notSupported(3)  

lpBridgeLocalIndex 1.3.6.1.4.1.114.1.1.21.1.1.7
The index of this bridge function relative to the slot on which it is physically present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortTable 1.3.6.1.4.1.114.1.1.21.2
A list of bridge port entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgePortEntry

lpBridgePortEntry 1.3.6.1.4.1.114.1.1.21.2.1
A Port entry contains information for a particular bridge port in a given system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpBridgePortEntry  

lpBridgePortBridgeIndex 1.3.6.1.4.1.114.1.1.21.2.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortIndex 1.3.6.1.4.1.114.1.1.21.2.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortSlotIndex 1.3.6.1.4.1.114.1.1.21.2.1.3
The slot number corresponding to the physical location of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortLocalIndex 1.3.6.1.4.1.114.1.1.21.2.1.4
The index of this port relative to the slot on which it is physically present and its port type. For example FDDI ports in a slot are identified with local indices from 1 to the number of FDDI ports in that slot, and the Ethernet ports in the same slot are identified with local indices from 1 to the number of Ethernet ports in that slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortType 1.3.6.1.4.1.114.1.1.21.2.1.5
The type of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(1), fddi(2), other(3)  

lpBridgePortIpFragmentationEnabled 1.3.6.1.4.1.114.1.1.21.2.1.6
A flag indicating whether or not IP fragmentation is enabled on this bridge port. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2), notSupported(3)  

lpBridgePortReceiveMulticastLimit 1.3.6.1.4.1.114.1.1.21.2.1.7
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

lpBridgePortAddressAction 1.3.6.1.4.1.114.1.1.21.2.1.8
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the port's address list. flushDynamicAddress: causes all dynamic addresses to be flushed from the port's address list.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

lpBridgePortTotalForwardedCts 1.3.6.1.4.1.114.1.1.21.2.1.9
The total number of frames forwarded from this port to all other ports of this bridge. Note that the total forwarded count is NOT equal to the receive count minus the discard count, as a single received multicast/broadcast frame can be forwarded to multiple bridge ports. Also frames which are 'flooded' because of unknown destination addresses account for multiple forwarding as well. The total forwarding count is the instantaneous sumation of the 'forwarded to' counts to all other ports of the bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortManagementFramesReceived 1.3.6.1.4.1.114.1.1.21.2.1.10
The number of bridge management frames received by this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortTotalDiscards 1.3.6.1.4.1.114.1.1.21.2.1.11
The total number of frames discarded by this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveBlockedDiscards 1.3.6.1.4.1.114.1.1.21.2.1.12
The number of frames discarded by this port because the the receiving bridge port was not in the 'forwarding' state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveMulticastLimitExceededs 1.3.6.1.4.1.114.1.1.21.2.1.13
The number of multicast/broadcast frames discarded by this port because the lpBridgePortReceiveMulticastLimit was exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveSecurityDiscards 1.3.6.1.4.1.114.1.1.21.2.1.14
The number of frames discarded by this port because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), which is not allowed to move, appears to have moved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveUnknownDiscards 1.3.6.1.4.1.114.1.1.21.2.1.15
The number of frames discarded by this port because the destination address was unknown. Note that this counter is only valid for FDDI ports, and only when the bridge is an EEM, or an ESM operating in express mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveOtherDiscards 1.3.6.1.4.1.114.1.1.21.2.1.16
The number of frames discarded by this port because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveErrorDiscards 1.3.6.1.4.1.114.1.1.21.2.1.17
The number of frames discarded by this port because of internal bridge system errors (e.g., hardware and software address table discrepencies).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortSameSegmentDiscards 1.3.6.1.4.1.114.1.1.21.2.1.18
The number of frames discarded by this port because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortTransmitBlockedDiscards 1.3.6.1.4.1.114.1.1.21.2.1.19
The number of frames discarded by this port because the the transmitting bridge port was not in the 'forwarding' state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortTotalFiltered 1.3.6.1.4.1.114.1.1.21.2.1.20
The total number of frames discarded by this port due to user defined filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveUnicastFiltered 1.3.6.1.4.1.114.1.1.21.2.1.21
The number of frames discarded by this port due to user defined receive path filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveMulticastFiltered 1.3.6.1.4.1.114.1.1.21.2.1.22
The number of frames discarded by this port due to user defined receive multicast path filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortTransmitUnicastFiltered 1.3.6.1.4.1.114.1.1.21.2.1.23
The number of frames discarded by this port due to user defined transmit path filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortTransmitMulticastFiltered 1.3.6.1.4.1.114.1.1.21.2.1.24
The number of frames discarded by this port due to user defined transmit multicast path filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveMulticastLimitExceededCount 1.3.6.1.4.1.114.1.1.21.2.1.25
The number of times the lpBridgePortReceiveMulticastLimit was exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortForwardedToTable 1.3.6.1.4.1.114.1.1.21.3
A list of port forwarding count information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgePortForwardedToEntry

lpBridgePortForwardedToEntry 1.3.6.1.4.1.114.1.1.21.3.1
A bridge port forwarded-to entry contains information on the count of frames forwarded from the receiving port indicated by the corresponding lpBridgePortForwardedToReceivePortIndex, to the destination port indicated by the corresponding lpBridgePortForwardedToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lpBridgePortForwardedToReceivePortIndex and the lpBridgePortForwardedToDstPortIndex objects.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpBridgePortForwardedToEntry  

lpBridgePortForwardedToBridgeIndex 1.3.6.1.4.1.114.1.1.21.3.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortForwardedToReceivePortIndex 1.3.6.1.4.1.114.1.1.21.3.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is forwarding frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortForwardedToDstPortIndex 1.3.6.1.4.1.114.1.1.21.3.1.3
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being forwarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortForwardedToCount 1.3.6.1.4.1.114.1.1.21.3.1.4
The count of frames forwarded from the receiving port to the destination port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortFilteredToTable 1.3.6.1.4.1.114.1.1.21.4
A list of port filtering count information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgePortFilteredToEntry

lpBridgePortFilteredToEntry 1.3.6.1.4.1.114.1.1.21.4.1
A bridge port filtered-to entry contains information on the count of frames filtered from the receiving port indicated by the corresponding lpBridgePortFilteredToReceivePortIndex, to the destination port indicated by the corresponding lpBridgePortFilteredToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lpBridgePortFilteredToReceivePortIndex and the lpBridgePortFilteredToDstPortIndex objects.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpBridgePortFilteredToEntry  

lpBridgePortFilteredToBridgeIndex 1.3.6.1.4.1.114.1.1.21.4.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortFilteredToReceivePortIndex 1.3.6.1.4.1.114.1.1.21.4.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is filtering frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortFilteredToDstPortIndex 1.3.6.1.4.1.114.1.1.21.4.1.3
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being filtered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortFilteredToCount 1.3.6.1.4.1.114.1.1.21.4.1.4
The count of frames filtered from the receiving port to the destination port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lpBridgePortAddressTable 1.3.6.1.4.1.114.1.1.21.5
A list of bridge port address entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgePortAddressEntry

lpBridgePortAddressEntry 1.3.6.1.4.1.114.1.1.21.5.1
An bridge port address entry contains information about particular bridge port address in a given system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpBridgePortAddressEntry  

lpBridgePortAddressBridgeIndex 1.3.6.1.4.1.114.1.1.21.5.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortAddressPortIndex 1.3.6.1.4.1.114.1.1.21.5.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortAddressIndex 1.3.6.1.4.1.114.1.1.21.5.1.3
The index of this address entry within the bridge address table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortAddressRemoteAddress 1.3.6.1.4.1.114.1.1.21.5.1.4
The remote MAC address detected on the port corresponding to this entry. Setting this object attempts to create a new entry in the table. Since the value of lpBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for lpBridgePortAddressIndex is zero. A get-next using the values of lpBridgePortAddressBridgeIndex and lpBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

lpBridgePortAddressType 1.3.6.1.4.1.114.1.1.21.5.1.5
This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

lpBridgePortAddressIsStatic 1.3.6.1.4.1.114.1.1.21.5.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

lpBridgePortAddressStaticPort 1.3.6.1.4.1.114.1.1.21.5.1.7
If the object lpBridgePortAddressIsStatic has value isStatic(1), this object indicates the local port index (as reported by lpBridgePortLocalIndex) for which this MAC address was statically configured. If the object lpBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpBridgePortAddressAge 1.3.6.1.4.1.114.1.1.21.5.1.8
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the port corresponding to this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpTrapEnterpriseTable 1.3.6.1.4.1.114.1.1.22.1
This table contains a listing of enterprises under which various traps are defined. In all cases except for the MIB-II generic traps, the enterprise under which a trap is defined is the same as that appearing in the ENTERPRISE portion of the trap. Associated with each trap enterprise is a trap enterprise index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrapEnterpriseTableEntry

lpTrapEnterpriseTableEntry 1.3.6.1.4.1.114.1.1.22.1.1
Information relating a specific trap enterprise OID with a trap enterprise index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpTrapEnterpriseTableEntry  

lpTrapEnterpriseIndex 1.3.6.1.4.1.114.1.1.22.1.1.1
A unique index corresponding to a particular enterprise OID under which traps are defined. This value of this object corresponding to a particular enterprise OID will remain constant accross system resets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpTrapEnterpriseOID 1.3.6.1.4.1.114.1.1.22.1.1.2
An enterpise OID under which traps are defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

lpTrapDestTable 1.3.6.1.4.1.114.1.1.23.1
This table contains information specifying which traps will be transmitted by the LANplex to a given destination address. The table is indexed by the destination address, the index of the enterprise which generates the trap, and the trap number. Each entry in the table with a status of valid identifies a trap which, when generated, will be transmitted to the corresponding destination address listed in that entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrapDestTableEntry

lpTrapDestTableEntry 1.3.6.1.4.1.114.1.1.23.1.1
Information relating a trap with a destination address to which the trap will be sent when it is generated.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LpTrapDestTableEntry  

lpTrapDestAddr 1.3.6.1.4.1.114.1.1.23.1.1.1
The network address to which the trap identified by this entry is to be transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NetworkAddress  

lpTrapDestEnterpriseIndex 1.3.6.1.4.1.114.1.1.23.1.1.2
The enterprise index of the enterprise identified in this entry. The value of this object is the same as the lpTrapEnterpriseIndex value for a given enterprise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpTrapNumber 1.3.6.1.4.1.114.1.1.23.1.1.3
The number of the trap within the corresponding enterprise for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lpTrapEntryStatus 1.3.6.1.4.1.114.1.1.23.1.1.4
The status of the trap destination table entry. Setting this object to valid has the effect of attempting to add the row corresponding to the instance specified. If the instance already exists, the set is successful (with no new entry added). If the instance specified is invalid, the set fails, otherwise the set succeeds and results in a new entry being added to the table. Setting this object to invalid has the effect of removing the corresponding entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

lpSlotInsertEvent 1
The SNMP trap that is generated when a board is inserted into a particular slot in the chassis.
TRAP-TYPE    

lpSlotExtractEvent 2
The SNMP trap that is generated when a board is extracted from a particular slot in the chassis.
TRAP-TYPE    

lpBridgeAddressThresholdEvent 3
The SNMP trap that is generated when the number of addresses stored in the bridge reaches lpBridgeAddressThreshold.
TRAP-TYPE    

lpSystemOverTemperatureEvent 6
The SNMP trap that is generated when the system temperature exceeds a certain threshold.
TRAP-TYPE    

lpSlotOverTemperatureEvent 7
The SNMP trap that is generated when the temperature of a board in a particular slot exceeds a certain threshold.
TRAP-TYPE    

lpPowerSupplyFailureEvent 8
The SNMP trap that is generated when a power supply unit fails in the system.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor