L2TV1-MIB

File: L2TV1-MIB.mib (64206 bytes)

Imported modules

RFC1155-SMI	RFC-1215	RFC-1212
RFC1213-MIB

Imported symbols

TimeTicks	Counter	Gauge
IpAddress	enterprises	TRAP-TYPE
OBJECT-TYPE	DisplayString

Defined Types

L2tTunnelStatsEntry
SEQUENCE
	l2tTunnelLocalTunnelControlId	INTEGER
	l2tTunnelPeerTunnelControlId	INTEGER
	l2tTunnelControlState	INTEGER
	l2tTunnelLocalInitConnection	INTEGER
	l2tTunnelLocalRecvPktWindow	INTEGER
	l2tTunnelRemoteRecvPktWindow	INTEGER
	l2tTunnelCtlTunnelFlwCtlTimeouts	Counter
	l2tTunnelRemoteHostName	DisplayString
	l2tTunnelNextSendSeq	INTEGER
	l2tTunnelNextRecvSeq	INTEGER
	l2tTunnelRemoteVendorName	DisplayString
	l2tTunnelRemoteFirmwareRevision	INTEGER
	l2tTunnelRemoteProtocolVersion	OCTET STRING
	l2tTunnelActiveSessions	Gauge
	l2tTunnelPrevSessions	Counter
	l2tTunnelUpTime	TimeTicks
	l2tTunnelType	INTEGER
	l2tTunnelInOctets	Counter
	l2tTunnelInPkts	Counter
	l2tTunnelInDiscards	Counter
	l2tTunnelOutOctets	Counter
	l2tTunnelOutPkts	Counter
	l2tTunnelOutDiscards	Counter
	l2tTunnelStatus	INTEGER

L2tSessionStatsEntry
SEQUENCE
	l2tSessionLocalControlTunnelId	INTEGER
	l2tSessionLocalCallId	INTEGER
	l2tSessionRemoteCallId	INTEGER
	l2tSessionPeerName	DisplayString
	l2tSessionLineState	INTEGER
	l2tSessionCallDeviceNumber	INTEGER
	l2tSessionCallSerialNumber	DisplayString
	l2tSessionConnectBps	INTEGER
	l2tSessionCallBearerType	INTEGER
	l2tSessionFramingType	INTEGER
	l2tSessionLocalRecvPacketWindow	INTEGER
	l2tSessionRemoteRecvPacketWindow	INTEGER
	l2tSessionDataRecvOctets	Counter
	l2tSessionDataRecvDecompOctets	Counter
	l2tSessionDataRecvPackets	Counter
	l2tSessionDataRecvDiscards	Counter
	l2tSessionDataSendOctets	Counter
	l2tSessionDataSendUncompOctets	Counter
	l2tSessionDataSendPackets	Counter
	l2tSessionDataSendDiscards	Counter
	l2tSessionDataFlowControlTimeouts	Counter
	l2tSessionNextSendSeq	INTEGER
	l2tSessionNextRecvSeq	INTEGER
	l2tSessionRemotePPD	INTEGER
	l2tSessionAuthMethod	INTEGER
	l2tSessionEncryptDecrypt	INTEGER
	l2tSessionUpTime	TimeTicks
	l2tSessionStatus	INTEGER

L2tUdpConfigEntry
SEQUENCE
	l2tUdpPeerAddress	IpAddress
	l2tUdpPeerPort	INTEGER

L2tUdpStatsEntry
SEQUENCE
	l2tUdpPeerIpAddress	IpAddress
	l2tUdpLocalIpAddress	IpAddress
	l2tUdpSrcPort	INTEGER
	l2tUdpDstPort	INTEGER

L2tAuthFailTunnelEntry
SEQUENCE
	l2tAuthFailTunnelIndex	INTEGER
	l2tAuthFailTunnelHostName	DisplayString
	l2tAuthFailTunnelIpAddress	IpAddress
	l2tAuthFailTunnelTime	TimeTicks

L2tAuthFailUserEntry
SEQUENCE
	l2tAuthFailUserIndex	INTEGER
	l2tAuthFailUserId	DisplayString
	l2tAuthFailUserTime	TimeTicks

L2tHistTunnelEntry
SEQUENCE
	l2tHistTunnelIndex	INTEGER
	l2tHistTunnelTunnelIndex	INTEGER
	l2tHistTunnelRemoteHostName	DisplayString
	l2tHistTunnelRemoteIpAddress	IpAddress
	l2tHistTunnelRemotePort	INTEGER
	l2tHistTunnelLocalIpAddress	IpAddress
	l2tHistTunnelLocalPort	INTEGER
	l2tHistTunnelUpTime	TimeTicks
	l2tHistTunnelTotalSessions	Counter
	l2tHistTunnelType	INTEGER
	l2tHistTunnelInOctets	Counter
	l2tHistTunnelInPkts	Counter
	l2tHistTunnelInDiscards	Counter
	l2tHistTunnelOutOctets	Counter
	l2tHistTunnelOutPkts	Counter
	l2tHistTunnelOutDiscards	Counter

L2tHistSessEntry
SEQUENCE
	l2tHistSessIndex	INTEGER
	l2tHistSessTunnelIndex	INTEGER
	l2tHistSessLocalCallId	INTEGER
	l2tHistSessRemoteIpAddress	IpAddress
	l2tHistSessLocalIpAddress	IpAddress
	l2tHistSessUpTime	TimeTicks
	l2tHistSessDataRecvOctets	Counter
	l2tHistSessDataRecvPackets	Counter
	l2tHistSessDataRecvDiscards	Counter
	l2tHistSessDataSendOctets	Counter
	l2tHistSessDataSendPackets	Counter
	l2tHistSessDataSendDiscards	Counter
	l2tHistSessAuthMethod	INTEGER
	l2tHistSessEncryptDecrypt	INTEGER

L2tHostEntry
SEQUENCE
	l2tHostIndex	INTEGER
	l2tHostName	DisplayString
	l2tHostIpAddress	IpAddress
	l2tHostTunnelStatus	INTEGER

L2tTunnelConnectTestEntry
SEQUENCE
	l2tTunnelConnectTestIndex	INTEGER
	l2tTunnelConnectTestHostName	DisplayString
	l2tTunnelConnectTestResult	INTEGER
	l2tTunnelConnectTestType	INTEGER
	l2tTunnelConnectTestStatus	INTEGER

L2tTunnelRspTimeTestEntry
SEQUENCE
	l2tTunnelRspTimeTestIndex	INTEGER
	l2tTunnelRspTimeTestHostName	DisplayString
	l2tTunnelRspTimeTestResult	INTEGER
	l2tTunnelRspTimeTestRtripTime	INTEGER
	l2tTunnelRspTimeTestStatus	INTEGER

Defined Values

ibmIROCroutingl2t		1.3.6.1.4.1.2.6.119.4.7
OBJECT IDENTIFIER

l2tScalar		1.3.6.1.4.1.2.6.119.4.7.1
OBJECT IDENTIFIER

l2tStats		1.3.6.1.4.1.2.6.119.4.7.2
OBJECT IDENTIFIER

l2tUdp		1.3.6.1.4.1.2.6.119.4.7.3
OBJECT IDENTIFIER

l2tAuthentication		1.3.6.1.4.1.2.6.119.4.7.4
OBJECT IDENTIFIER

l2tHistory		1.3.6.1.4.1.2.6.119.4.7.5
OBJECT IDENTIFIER

l2tHosts		1.3.6.1.4.1.2.6.119.4.7.6
OBJECT IDENTIFIER

l2tTests		1.3.6.1.4.1.2.6.119.4.7.7
OBJECT IDENTIFIER

l2tTrapCntl		1.3.6.1.4.1.2.6.119.4.7.8
OBJECT IDENTIFIER

l2tScalarConfig		1.3.6.1.4.1.2.6.119.4.7.1.1
OBJECT IDENTIFIER

l2tAdminState		1.3.6.1.4.1.2.6.119.4.7.1.1.1
This object defines the administrative state of the L2T protocol stack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

l2tAuthenticateIncomingTunnelSetupRequests		1.3.6.1.4.1.2.6.119.4.7.1.1.2
Defines whether the L2T protocol stack will REQUIRE the CHAP-like authentication mechanism to be present in all tunnel setup requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

l2tTunnelDataFlowControl		1.3.6.1.4.1.2.6.119.4.7.1.1.3
This object determines whether or not L2T is to use flow control on the tunneled data packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

l2tControlRecvPacketWindow		1.3.6.1.4.1.2.6.119.4.7.1.1.4
This object defines the Control Channel receive window size which is transmitted to the L2T peers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tDataRecvPacketWindow		1.3.6.1.4.1.2.6.119.4.7.1.1.5
This object defines the Data Channel receive window size which is transmitted to the L2T peers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tHelloTimer		1.3.6.1.4.1.2.6.119.4.7.1.1.6
This object defines the length of the inactivity timer in seconds which causes the L2T stack to transmit a keep-alive packet (known as a Hello packet).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tControlRetransmissions		1.3.6.1.4.1.2.6.119.4.7.1.1.7
This object defines the number of retransmissions which the L2T stack will attempt before assuming that the peer is no longer reachable. The default value for this object is zero (0) which results in the L2T stack not doing retransmissions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

l2tSecurityExtensions		1.3.6.1.4.1.2.6.119.4.7.1.1.8
This object defines whether the L2T protocol stack will require the L2T Security for all incoming tunnel setup requests.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

l2tHistoryWindowSize		1.3.6.1.4.1.2.6.119.4.7.1.1.9
The window size of the L2T Tunnel History Table (l2tHistTunnelTable) and the L2T Session History Table (l2tHistSessTable). When retrieved by an SNMP GET or GET-NEXT request, this number specifies the maximum number of entries which will be maintained in each of these tables. When modified by an SNMP SET request, the device will set the value of this object as close as possible to the requested value based on implementation and available resources.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

l2tAuthFailWindowSize		1.3.6.1.4.1.2.6.119.4.7.1.1.10
The window size of the L2T Tunnel Authentication Failure Table (l2tAuthFailTunnelTable) and the L2T User Authentication Failure Table (l2tAuthFailUserTable). When retrieved by an SNMP GET or GET-NEXT request, this number specifies the maximum number of entries which will be maintained in each of these tables. When modified by an SNMP SET request, the device will set the value of this object as close as possible to the requested value based on implementation and available resources.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

l2tScalarStat		1.3.6.1.4.1.2.6.119.4.7.1.2
OBJECT IDENTIFIER

l2tMibVersion		1.3.6.1.4.1.2.6.119.4.7.1.2.1
The level of the IBM L2T MIB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tProtocolVersion		1.3.6.1.4.1.2.6.119.4.7.1.2.2
This object describes the protocol version and revision of the L2T protocol stack. The first octet contains the protocol version. The second octet contains the protocol revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

l2tNumActiveTunnels		1.3.6.1.4.1.2.6.119.4.7.1.2.3
This object returns the number of L2T tunnels that are mandatory active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tStatsNumActiveSessions		1.3.6.1.4.1.2.6.119.4.7.1.2.4
This object returns the number of L2T sessions that are mandatory active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tTunnelStatsTable		1.3.6.1.4.1.2.6.119.4.7.2.1
The L2T tunnel status and statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tTunnelStatsEntry

l2tTunnelStatsEntry		1.3.6.1.4.1.2.6.119.4.7.2.1.1
An L2T tunnel interface stats entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tTunnelStatsEntry

l2tTunnelLocalTunnelControlId		1.3.6.1.4.1.2.6.119.4.7.2.1.1.1
This object contains the local tunnel Identifier.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tTunnelPeerTunnelControlId		1.3.6.1.4.1.2.6.119.4.7.2.1.1.2
This object contains the remote tunnel Identifier.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tTunnelControlState		1.3.6.1.4.1.2.6.119.4.7.2.1.1.3
This field contains the mandatory state of the control tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	l2ttunnelidle(1), l2ttunnelwaitctrlreply(2), l2ttunnelwaitctrlconn(3), l2ttunnelestablished(4), l2ttunnelhold(5)

l2tTunnelLocalInitConnection		1.3.6.1.4.1.2.6.119.4.7.2.1.1.4
This object indicates whether the tunnel was generated locally or not. When this object returns a value of true(1) the tunnel was locally generated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

l2tTunnelLocalRecvPktWindow		1.3.6.1.4.1.2.6.119.4.7.2.1.1.5
This object contains the local receive window size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tTunnelRemoteRecvPktWindow		1.3.6.1.4.1.2.6.119.4.7.2.1.1.6
This object contains the remote receive window size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tTunnelCtlTunnelFlwCtlTimeouts		1.3.6.1.4.1.2.6.119.4.7.2.1.1.7
This object contains the number of timeouts due to flow control.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tTunnelRemoteHostName		1.3.6.1.4.1.2.6.119.4.7.2.1.1.8
This object contains the host name of the L2T peer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

l2tTunnelNextSendSeq		1.3.6.1.4.1.2.6.119.4.7.2.1.1.9
This object contains the next send sequence number for the control channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tTunnelNextRecvSeq		1.3.6.1.4.1.2.6.119.4.7.2.1.1.10
This object contains the next receive sequence number for the control channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tTunnelRemoteVendorName		1.3.6.1.4.1.2.6.119.4.7.2.1.1.11
This object identifies the vendor name of the peer's L2T implementation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

l2tTunnelRemoteFirmwareRevision		1.3.6.1.4.1.2.6.119.4.7.2.1.1.12
This object contains the L2T peer's firmware revision number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

l2tTunnelRemoteProtocolVersion		1.3.6.1.4.1.2.6.119.4.7.2.1.1.13
This object describes the protocol version and revision of the L2T protocol stack. The first octet contains the protocol version. The second octet contains the protocol revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

l2tTunnelActiveSessions		1.3.6.1.4.1.2.6.119.4.7.2.1.1.14
This object contains the total number of sessions in use for this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

l2tTunnelPrevSessions		1.3.6.1.4.1.2.6.119.4.7.2.1.1.15
The total number of previously actively sessions which used this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tTunnelUpTime		1.3.6.1.4.1.2.6.119.4.7.2.1.1.16
The length of time the tunnel has been active in hundredths of seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

l2tTunnelType		1.3.6.1.4.1.2.6.119.4.7.2.1.1.17
The type of Layer-2 Tunnel. Possible values are: 1 = Layer-2 Tunnel Protocol Tunnel, 2 = Layer-2 Forwarding Tunnel, 3 = Point-to-Point Tunnel Protocol Tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	l2tpTunnel(1), l2fTunnel(2), pptpTunnel(3)

l2tTunnelInOctets		1.3.6.1.4.1.2.6.119.4.7.2.1.1.18
The number of octets received by this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tTunnelInPkts		1.3.6.1.4.1.2.6.119.4.7.2.1.1.19
The number of packets received by this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tTunnelInDiscards		1.3.6.1.4.1.2.6.119.4.7.2.1.1.20
The number of packets which were discarded during receive processing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tTunnelOutOctets		1.3.6.1.4.1.2.6.119.4.7.2.1.1.21
The number of octets sent by this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tTunnelOutPkts		1.3.6.1.4.1.2.6.119.4.7.2.1.1.22
The number of packets sent by this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tTunnelOutDiscards		1.3.6.1.4.1.2.6.119.4.7.2.1.1.23
The number of packets which were discarded during send processing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tTunnelStatus		1.3.6.1.4.1.2.6.119.4.7.2.1.1.24
The status of the MIB table row. This object can be used to bring the tunnel down by setting value of this object to destroy(2). This object cannot be used to create a MIB table row.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), destroy(2)

l2tSessionStatsTable		1.3.6.1.4.1.2.6.119.4.7.2.2
The L2T session status and statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tSessionStatsEntry

l2tSessionStatsEntry		1.3.6.1.4.1.2.6.119.4.7.2.2.1
An L2T session interface stats entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tSessionStatsEntry

l2tSessionLocalControlTunnelId		1.3.6.1.4.1.2.6.119.4.7.2.2.1.1
This object contains the control Channel Tunnel identifier for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionLocalCallId		1.3.6.1.4.1.2.6.119.4.7.2.2.1.2
This object contains the local call identifier for the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionRemoteCallId		1.3.6.1.4.1.2.6.119.4.7.2.2.1.3
This object contains the remote call identifier for the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionPeerName		1.3.6.1.4.1.2.6.119.4.7.2.2.1.4
This object identifies the peer session name on this interface. This is typically the login name of the remote user.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

l2tSessionLineState		1.3.6.1.4.1.2.6.119.4.7.2.2.1.5
This object contains the current state of the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	callwaittunnel(1), callidle(2), callwaitreply(3), callwaitconnect(4), callwaitcsanswer(5), callestablished(6)

l2tSessionCallDeviceNumber		1.3.6.1.4.1.2.6.119.4.7.2.2.1.6
The internal interface number used for the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionCallSerialNumber		1.3.6.1.4.1.2.6.119.4.7.2.2.1.7
This object contains the serial number that applies to the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

l2tSessionConnectBps		1.3.6.1.4.1.2.6.119.4.7.2.2.1.8
This object returns the baud rate which this session was established at.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionCallBearerType		1.3.6.1.4.1.2.6.119.4.7.2.2.1.9
This object returns the bearer type that applies to this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	digital(1), analog(2)

l2tSessionFramingType		1.3.6.1.4.1.2.6.119.4.7.2.2.1.10
This object returns the framing type used for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	synchronous(1), asynchronous(2)

l2tSessionLocalRecvPacketWindow		1.3.6.1.4.1.2.6.119.4.7.2.2.1.11
This object returns the local receive window size for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionRemoteRecvPacketWindow		1.3.6.1.4.1.2.6.119.4.7.2.2.1.12
This object returns the remote receive window size for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionDataRecvOctets		1.3.6.1.4.1.2.6.119.4.7.2.2.1.13
The number of octets received on the data tunnel for this session. This value is accumulated BEFORE determining whether or not the packet should be uncompressed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionDataRecvDecompOctets		1.3.6.1.4.1.2.6.119.4.7.2.2.1.14
The number of uncompressed octets received on the data tunnel for this session. This value is accumulated AFTER the packet is uncompressed. If compression is not in use, this value will match the value of l2tSessionDataRecvOctets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionDataRecvPackets		1.3.6.1.4.1.2.6.119.4.7.2.2.1.15
The number packets received on the data tunnel for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionDataRecvDiscards		1.3.6.1.4.1.2.6.119.4.7.2.2.1.16
The number packets which were discarded during the data tunnels receive processing for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionDataSendOctets		1.3.6.1.4.1.2.6.119.4.7.2.2.1.17
The number of octets sent on the data tunnel for this session. This value is accumulated AFTER the packet was compressed. If compression is not in use, this value will match the value of l2tSessionDataRecvUncompOctets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionDataSendUncompOctets		1.3.6.1.4.1.2.6.119.4.7.2.2.1.18
The number of uncompressed octets sent on the data tunnel for this session. This value is is accumulated BEFORE determining whether or not the packet should be compressed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionDataSendPackets		1.3.6.1.4.1.2.6.119.4.7.2.2.1.19
The number packets sent on the data tunnel for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionDataSendDiscards		1.3.6.1.4.1.2.6.119.4.7.2.2.1.20
The number packets which were discarded during the data tunnels send processing for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionDataFlowControlTimeouts		1.3.6.1.4.1.2.6.119.4.7.2.2.1.21
This object returns the total number of flow control time-outs seen on the data Tunnel for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tSessionNextSendSeq		1.3.6.1.4.1.2.6.119.4.7.2.2.1.22
This object contains the next send sequence number for for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionNextRecvSeq		1.3.6.1.4.1.2.6.119.4.7.2.2.1.23
This object contains the next receive sequence number for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionRemotePPD		1.3.6.1.4.1.2.6.119.4.7.2.2.1.24
This object contains the Packet Processing Delay for the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tSessionAuthMethod		1.3.6.1.4.1.2.6.119.4.7.2.2.1.25
This object contains the proxy authentication method employed by the LAC for the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	text(1), pppchap(2), ppppap(3), none(4)

l2tSessionEncryptDecrypt		1.3.6.1.4.1.2.6.119.4.7.2.2.1.26
This object reflects whether or not the encryption and and decryption is being performed for the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

l2tSessionUpTime		1.3.6.1.4.1.2.6.119.4.7.2.2.1.27
The length of time the session has been active in hundredths of seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

l2tSessionStatus		1.3.6.1.4.1.2.6.119.4.7.2.2.1.28
The status of the MIB table row. This object can be used to bring the session down by setting value of this object to destroy(2). This object cannot be used to create a MIB table row.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), destroy(2)

l2tUdpConfigTable		1.3.6.1.4.1.2.6.119.4.7.3.1
The L2T session configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tUdpConfigEntry

l2tUdpConfigEntry		1.3.6.1.4.1.2.6.119.4.7.3.1.1
An L2T session interface configuration entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tUdpConfigEntry

l2tUdpPeerAddress		1.3.6.1.4.1.2.6.119.4.7.3.1.1.1
This object is used to configure the remote tunnel endpoints IP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tUdpPeerPort		1.3.6.1.4.1.2.6.119.4.7.3.1.1.2
This object is used to configure the remote tunnel endpoints UDP port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tUdpStatsTable		1.3.6.1.4.1.2.6.119.4.7.3.2
The L2T session configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tUdpStatsEntry

l2tUdpStatsEntry		1.3.6.1.4.1.2.6.119.4.7.3.2.1
An L2T session interface configuration entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tUdpStatsEntry

l2tUdpPeerIpAddress		1.3.6.1.4.1.2.6.119.4.7.3.2.1.1
The peer IP Address of the tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tUdpLocalIpAddress		1.3.6.1.4.1.2.6.119.4.7.3.2.1.2
The local IP Address of the tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tUdpSrcPort		1.3.6.1.4.1.2.6.119.4.7.3.2.1.3
The peer port of tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tUdpDstPort		1.3.6.1.4.1.2.6.119.4.7.3.2.1.4
The local port of tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tAuthStats		1.3.6.1.4.1.2.6.119.4.7.4.1
OBJECT IDENTIFIER

l2tAuthTunnelSuccesses		1.3.6.1.4.1.2.6.119.4.7.4.1.1
The number of successful tunnel authentications performed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tAuthTunnelFailures		1.3.6.1.4.1.2.6.119.4.7.4.1.2
The number of tunnel authentications which failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tAuthUserSuccesses		1.3.6.1.4.1.2.6.119.4.7.4.1.3
The number of successful user authentications performed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tAuthUserFailures		1.3.6.1.4.1.2.6.119.4.7.4.1.4
The number of user authentications which failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tAuthFailures		1.3.6.1.4.1.2.6.119.4.7.4.2
OBJECT IDENTIFIER

l2tAuthFailTunnelTable		1.3.6.1.4.1.2.6.119.4.7.4.2.1
The L2T tunnel authentication failure table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tAuthFailTunnelEntry

l2tAuthFailTunnelEntry		1.3.6.1.4.1.2.6.119.4.7.4.2.1.1
An L2T tunnel authentication failure entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tAuthFailTunnelEntry

l2tAuthFailTunnelIndex		1.3.6.1.4.1.2.6.119.4.7.4.2.1.1.1
The index of the tunnel authentication failure table. The value of the index is a number which begins at one and is incremented with each tunnel authentication failure. It will wrap at 65535.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

l2tAuthFailTunnelHostName		1.3.6.1.4.1.2.6.119.4.7.4.2.1.1.2
The host name used on the failed tunnel authentication attempt.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

l2tAuthFailTunnelIpAddress		1.3.6.1.4.1.2.6.119.4.7.4.2.1.1.3
The IP address associated with the failed tunnel authentication attempt.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tAuthFailTunnelTime		1.3.6.1.4.1.2.6.119.4.7.4.2.1.1.4
The time of the failure in hundredths of seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

l2tAuthFailUserTable		1.3.6.1.4.1.2.6.119.4.7.4.2.2
The L2T user authentication failure table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tAuthFailUserEntry

l2tAuthFailUserEntry		1.3.6.1.4.1.2.6.119.4.7.4.2.2.1
An L2T user authentication failure entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tAuthFailUserEntry

l2tAuthFailUserIndex		1.3.6.1.4.1.2.6.119.4.7.4.2.2.1.1
The index of the user authentication failure table. The value of the index is a number which begins at one and is incremented with each user authentication failure. It will wrap at 65535.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

l2tAuthFailUserId		1.3.6.1.4.1.2.6.119.4.7.4.2.2.1.2
The user name used on the failed authentication attempt.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

l2tAuthFailUserTime		1.3.6.1.4.1.2.6.119.4.7.4.2.2.1.3
The time of the failure in hundredths of seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

l2tHistTunnelTable		1.3.6.1.4.1.2.6.119.4.7.5.1
The L2T tunnel history table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tHistTunnelEntry

l2tHistTunnelEntry		1.3.6.1.4.1.2.6.119.4.7.5.1.1
An L2T tunnel history entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tHistTunnelEntry

l2tHistTunnelIndex		1.3.6.1.4.1.2.6.119.4.7.5.1.1.1
The index of the tunnel history table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. The value of this object will wrap at 65535.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

l2tHistTunnelTunnelIndex		1.3.6.1.4.1.2.6.119.4.7.5.1.1.2
The value which was used as the tunnel stats table index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tHistTunnelRemoteHostName		1.3.6.1.4.1.2.6.119.4.7.5.1.1.3
The remote host name which was used for this previous tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

l2tHistTunnelRemoteIpAddress		1.3.6.1.4.1.2.6.119.4.7.5.1.1.4
The remote IP address which was used for this previous tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tHistTunnelRemotePort		1.3.6.1.4.1.2.6.119.4.7.5.1.1.5
The remote UDP port which was used for this previous tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tHistTunnelLocalIpAddress		1.3.6.1.4.1.2.6.119.4.7.5.1.1.6
The local IP address which was used for this previous tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tHistTunnelLocalPort		1.3.6.1.4.1.2.6.119.4.7.5.1.1.7
The local UDP port which was used for this previous tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tHistTunnelUpTime		1.3.6.1.4.1.2.6.119.4.7.5.1.1.8
The length of time the tunnel was active in hundredths of seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

l2tHistTunnelTotalSessions		1.3.6.1.4.1.2.6.119.4.7.5.1.1.9
The total number of sessions which used this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistTunnelType		1.3.6.1.4.1.2.6.119.4.7.5.1.1.10
The type of Layer-2 Tunnel. Possible values are 1 = Layer-2 Tunnel Protocol Tunnel, 2 = Layer-2 Forwarding Tunnel, 3 = Point-to-Point Tunnel Protocol Tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	l2tpTunnel(1), l2fTunnel(2), pptpTunnel(3)

l2tHistTunnelInOctets		1.3.6.1.4.1.2.6.119.4.7.5.1.1.11
The number of octets received by this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistTunnelInPkts		1.3.6.1.4.1.2.6.119.4.7.5.1.1.12
The number of packets received by this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistTunnelInDiscards		1.3.6.1.4.1.2.6.119.4.7.5.1.1.13
The number of packets which were discarded during receive processing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistTunnelOutOctets		1.3.6.1.4.1.2.6.119.4.7.5.1.1.14
The number of octets sent by this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistTunnelOutPkts		1.3.6.1.4.1.2.6.119.4.7.5.1.1.15
The number of packets sent by this tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistTunnelOutDiscards		1.3.6.1.4.1.2.6.119.4.7.5.1.1.16
The number of packets which were discarded during send processing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistSessTable		1.3.6.1.4.1.2.6.119.4.7.5.2
The L2T session history table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tHistSessEntry

l2tHistSessEntry		1.3.6.1.4.1.2.6.119.4.7.5.2.1
An L2T session history entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tHistSessEntry

l2tHistSessIndex		1.3.6.1.4.1.2.6.119.4.7.5.2.1.1
The index of the session history table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. The value of this object will wrap at 65535.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

l2tHistSessTunnelIndex		1.3.6.1.4.1.2.6.119.4.7.5.2.1.2
The value which was used as the tunnel stats table index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tHistSessLocalCallId		1.3.6.1.4.1.2.6.119.4.7.5.2.1.3
The value which was used as the session stats table index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tHistSessRemoteIpAddress		1.3.6.1.4.1.2.6.119.4.7.5.2.1.4
The remote IP address which was used for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tHistSessLocalIpAddress		1.3.6.1.4.1.2.6.119.4.7.5.2.1.5
The local IP address which was used for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tHistSessUpTime		1.3.6.1.4.1.2.6.119.4.7.5.2.1.6
The length of time the session was been active in hundredths of seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

l2tHistSessDataRecvOctets		1.3.6.1.4.1.2.6.119.4.7.5.2.1.7
The number of octets received on the data tunnel for this session. This value was accumulated BEFORE determining whether or not the packet should be uncompressed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistSessDataRecvPackets		1.3.6.1.4.1.2.6.119.4.7.5.2.1.8
The number packets received on the data tunnel for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistSessDataRecvDiscards		1.3.6.1.4.1.2.6.119.4.7.5.2.1.9
The number packets which were discarded during the data tunnels receive processing for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistSessDataSendOctets		1.3.6.1.4.1.2.6.119.4.7.5.2.1.10
The number of octets sent on the data tunnel for this session. This value is accumulated AFTER the packet was compressed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistSessDataSendPackets		1.3.6.1.4.1.2.6.119.4.7.5.2.1.11
The number packets sent on the data tunnel for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistSessDataSendDiscards		1.3.6.1.4.1.2.6.119.4.7.5.2.1.12
The number packets which were discarded during the data tunnels send processing for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

l2tHistSessAuthMethod		1.3.6.1.4.1.2.6.119.4.7.5.2.1.13
This object contains the proxy authentication method which was employed by the LAC for the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	text(1), pppchap(2), ppppap(3), none(4)

l2tHistSessEncryptDecrypt		1.3.6.1.4.1.2.6.119.4.7.5.2.1.14
This object reflects whether or not the encryption and and decryption is being performed for the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

l2tHostTable		1.3.6.1.4.1.2.6.119.4.7.6.1
The L2T host table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tHostEntry

l2tHostEntry		1.3.6.1.4.1.2.6.119.4.7.6.1.1
An L2T host entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tHostEntry

l2tHostIndex		1.3.6.1.4.1.2.6.119.4.7.6.1.1.1
The index of the host table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

l2tHostName		1.3.6.1.4.1.2.6.119.4.7.6.1.1.2
The host name which may used for a Layer-2 tunnel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

l2tHostIpAddress		1.3.6.1.4.1.2.6.119.4.7.6.1.1.3
The IP Address associated with the host name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

l2tHostTunnelStatus		1.3.6.1.4.1.2.6.119.4.7.6.1.1.4
The current tunnel status of the host.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

l2tTunnelConnectTestTable		1.3.6.1.4.1.2.6.119.4.7.7.1
The L2T tunnel connectivity test table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tTunnelConnectTestEntry

l2tTunnelConnectTestEntry		1.3.6.1.4.1.2.6.119.4.7.7.1.1
An L2T tunnel connectivity test entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tTunnelConnectTestEntry

l2tTunnelConnectTestIndex		1.3.6.1.4.1.2.6.119.4.7.7.1.1.1
The index of the tunnel connectivity test table. The value of the index is a number which was used during row creation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

l2tTunnelConnectTestHostName		1.3.6.1.4.1.2.6.119.4.7.7.1.1.2
The host name used to establish a Layer-2 tunnel. This object is used to trigger a connectivity test to a specific host. A new test is triggered by SETTING this object using a non-existent index and SETTING l2tTunnelConnectTestStatus to createAndGo. For example to trigger a new connectivity test when the table currently contains row 1 through 4, one would send a SET as follows: SNMP SET l2tTunnelConnectHostName.5 = Host-To-Test l2tTunnelConnectTestStatus.5 = createAndGo See l2tHostName for the possible host names which may be specified. Existing entries may NOT be modified.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

l2tTunnelConnectTestResult		1.3.6.1.4.1.2.6.119.4.7.7.1.1.3
The result of the tunnel connectivity test. 1 = test is in progress 2 = test ended successfully 3 = tunnel is already active 4 = host did not respond 5 = local authentication failure 6 = remote authentication failure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inProgress(1), successful(2), tunnelAlreadyUp(3), hostNotResponding(4), localAuthFailure(5), remoteAuthFailure(6)

l2tTunnelConnectTestType		1.3.6.1.4.1.2.6.119.4.7.7.1.1.4
The type of Layer-2 Tunnel. Possible values are: 1 = Layer-2 Tunnel Protocol Tunnel 2 = Layer-2 Forwarding Tunnel 3 = Point-to-Point Tunnel Protocol Tunnel 99 = no tunnel created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	l2tpTunnel(1), l2fTunnel(2), pptpTunnel(3), none(99)

l2tTunnelConnectTestStatus		1.3.6.1.4.1.2.6.119.4.7.7.1.1.5
The status of the test entry. Possible values are: 1 = active entry 4 = createAndGo This object is used to trigger a connectivity test to a specific host. A new test is triggered by SETTING this object to createAndGo using a non-existent index and SETTING l2tTunnelConnectTestHostName to a specific host name. For example to trigger a new connectivity test when the table currently contains row 1 through 4, one would send a SET as follows: SNMP SET l2tTunnelConnectHostName.5 = Host-To-Test l2tTunnelConnectTestStatus.5 = createAndGo See l2tHostName for the possible host names which may be specified. Existing entries may NOT be modified.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), createAndGo(4)

l2tTunnelRspTimeTestTable		1.3.6.1.4.1.2.6.119.4.7.7.2
The L2T tunnel response time test table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tTunnelRspTimeTestEntry

l2tTunnelRspTimeTestEntry		1.3.6.1.4.1.2.6.119.4.7.7.2.1
An L2T tunnel response time test entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	L2tTunnelRspTimeTestEntry

l2tTunnelRspTimeTestIndex		1.3.6.1.4.1.2.6.119.4.7.7.2.1.1
The index of the tunnel connectivity test table. The value of the index is a number which was used during row creation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

l2tTunnelRspTimeTestHostName		1.3.6.1.4.1.2.6.119.4.7.7.2.1.2
The host name used to test the round-trip response time of an existing Layer-2 Tunnel. This object is used to trigger a response time test of an existing Layer-2 to a specific host. A new test is triggered by SETTING this object using a non-existent index and SETTING l2tTunnelRspTimeTestStatus to createAndGo. For example to trigger a new connectivity test when the table currently contains row 1 through 4, one would send a SET as follows: SNMP SET l2tTunnelRspTimeHostName.5 = Host-To-Test l2tTunnelRspTimeTestStatus.5 = createAndGo See l2tHistTunnelRemoteHostName for the possible host names which may be specified. Existing entries may NOT be modified.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

l2tTunnelRspTimeTestResult		1.3.6.1.4.1.2.6.119.4.7.7.2.1.3
The result of the tunnel connectivity test. 1 = test is in progress 2 = test ended successfully 3 = host did not respond 4 = a tunnel to this host is NOT available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inProgress(1), successful(2), hostNotResponding(3), tunnelDown(4)

l2tTunnelRspTimeTestRtripTime		1.3.6.1.4.1.2.6.119.4.7.7.2.1.4
The round time in milliseconds of response time test.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

l2tTunnelRspTimeTestStatus		1.3.6.1.4.1.2.6.119.4.7.7.2.1.5
The status of the test entry. Possible values are: 1 = active entry 4 = createAndGo This object is used to trigger a response time test of an existing Layer-2 to a specific host. A new test is triggered by SETTING this object using a non-existent index to createAndGo and SETTING l2tTunnelRspTimeHostName to a specific host. For example to trigger a new response time test when the table currently contains row 1 through 4, one would send a SET as follows: SNMP SET l2tTunnelRspTimeHostName.5 = Host-To-Test l2tTunnelRspTimeTestStatus.5 = createAndGo See l2tHistTunnelRemoteHostName for the possible host names which may be specified. Existing entries may NOT be modified.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), createAndGo(4)

l2tTrapCntlTunnelStart		1.3.6.1.4.1.2.6.119.4.7.8.1
This object defines the administrative state of sending the L2T Tunnel Start TRAP
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

l2tTrapCntlTunnelStop		1.3.6.1.4.1.2.6.119.4.7.8.2
This object defines the administrative state of sending the L2T Tunnel Stop TRAP
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

l2tTrapCntlAuthFailTunnel		1.3.6.1.4.1.2.6.119.4.7.8.3
This object defines the administrative state of sending the L2T Tunnel Authentication Failure TRAP
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

l2tTrapCntlAuthFailUser		1.3.6.1.4.1.2.6.119.4.7.8.4
This object defines the administrative state of sending the L2T User Authentication Failure TRAP
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

l2tTunnelStart		1
This TRAP is generated when a Layer-2 Tunnel is created.
TRAP-TYPE

l2tTunnelStop		2
This TRAP is generated when a Layer-2 Tunnel ends.
TRAP-TYPE

l2tAuthFailTunnel		3
This TRAP is generated when a Layer-2 Tunnel is NOT created due to an authentication failure.
TRAP-TYPE

l2tAuthFailUser		4
This TRAP is generated when a Session for a Layer-2 Tunnel is NOT created due to an authentication failure.
TRAP-TYPE