Juniper-TACACS-Plus-Client-MIB

File: Juniper-TACACS-Plus-Client-MIB.mib (18635 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
Juniper-MIBs

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
IpAddress TEXTUAL-CONVENTION RowStatus
TruthValue TimeStamp MODULE-COMPLIANCE
OBJECT-GROUP juniMibs

Defined Types

JuniKeyString  
A string to keep a TACACS+ key. It may contain TAB character and/or any character from 0x20 to 0x7e inclusive. Its lenght is limited to 100. For security reasons it always reads as an empty string.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..100)  

JuniTacacsPlusClientHostConfigEntry  
SEQUENCE    
  juniTacacsPlusClientHostAddr IpAddress
  juniTacacsPlusClientHostPort INTEGER
  juniTacacsPlusClientHostPrimary TruthValue
  juniTacacsPlusClientHostSingleConnection TruthValue
  juniTacacsPlusClientHostTimeout INTEGER
  juniTacacsPlusClientHostKey JuniKeyString
  juniTacacsPlusClientHostStatus RowStatus
  juniTacacsPlusClientHostOrder INTEGER

JuniTacacsPlusClientHostStatsEntry  
SEQUENCE    
  juniTacacsPlusClientHostAuthRequests Counter32
  juniTacacsPlusClientHostAuthReplies Counter32
  juniTacacsPlusClientHostAuthPending Counter32
  juniTacacsPlusClientHostAuthTimeouts Counter32
  juniTacacsPlusClientHostAuthorRequests Counter32
  juniTacacsPlusClientHostAuthorReplies Counter32
  juniTacacsPlusClientHostAuthorPending Counter32
  juniTacacsPlusClientHostAuthorTimeouts Counter32
  juniTacacsPlusClientHostAcctRequests Counter32
  juniTacacsPlusClientHostAcctReplies Counter32
  juniTacacsPlusClientHostAcctPending Counter32
  juniTacacsPlusClientHostAcctTimeouts Counter32
  juniTacacsPlusClientHostDiscontinuityTime TimeStamp

Defined Values

juniTacacsPlusClientMIB 1.3.6.1.4.1.4874.2.2.60
The Terminal Access Controller Access Control System Plus (TACACS+) Client MIB for the Juniper Networks enterprise.
MODULE-IDENTITY    

juniTacacsPlusClientObjects 1.3.6.1.4.1.4874.2.2.60.1
OBJECT IDENTIFIER    

juniTacacsPlusClientCommonConfig 1.3.6.1.4.1.4874.2.2.60.1.1
OBJECT IDENTIFIER    

juniTacacsPlusClientHostConfig 1.3.6.1.4.1.4874.2.2.60.1.2
OBJECT IDENTIFIER    

juniTacacsPlusClientHostStats 1.3.6.1.4.1.4874.2.2.60.1.3
OBJECT IDENTIFIER    

juniTacacsPlusClientDirectedRequest 1.3.6.1.4.1.4874.2.2.60.1.1.1
This object represents directed-request option setting. In any of the enabled enabled states user name entered as `user@host' will be sent to specified host fot authentication. If `restricted' is in effect and the specified host is not available client would not try to use other hosts, if `truncated' is in effect, then `@host' part will be stripped before submission for authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notRestrictedAndTruncated(1), disabled(2), notRestrictedAndNotTruncated(3), restrictedAndTruncated(4), restrictedAndNotTruncated(5)  

juniTacacsPlusClientTimeout 1.3.6.1.4.1.4874.2.2.60.1.1.2
TACACS+ host response timeout in seconds. Value 0 means 'not configured, it this case built-in internal timeout value will be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

juniTacacsPlusClientKey 1.3.6.1.4.1.4874.2.2.60.1.1.3
If the size is non-zero, packets passed between host and client will be encrypted.
Status: current Access: read-write
OBJECT-TYPE    
  JuniKeyString  

juniTacacsPlusClientSourceIp 1.3.6.1.4.1.4874.2.2.60.1.1.4
If the value is is not 0.0.0.0 client will use this address as a source IP address for communication with servers. Changing this value would not affect existing connections.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

juniTacacsPlusClientHostConfigTable 1.3.6.1.4.1.4874.2.2.60.1.2.1
This table contains per host configuration parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniTacacsPlusClientHostConfigEntry

juniTacacsPlusClientHostConfigEntry 1.3.6.1.4.1.4874.2.2.60.1.2.1.1
A TACACS+ host statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniTacacsPlusClientHostConfigEntry  

juniTacacsPlusClientHostAddr 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.1
The IP address of the host.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

juniTacacsPlusClientHostPort 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.2
The TCP port of the host.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

juniTacacsPlusClientHostPrimary 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.3
Non-directed requests are submitted to the primary host first. There is only one primary host in the table. So, setting this object to true, will also change the value of this object in the current primary host. If primary host is deleted or reset, system will assing new primary host. When the first entry is created it becomes primary regardless of the value of this object.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniTacacsPlusClientHostSingleConnection 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.4
Traditionally TACACS+ client creates a new TCP connection for every session. If this value is true then TACACS+ client will try to use single connection if supported both by client implementation and by the host.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniTacacsPlusClientHostTimeout 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.5
TACACS+ host response timeout in seconds. If the value is 0 then the value of juniTacacsPlusClientTimeout will be used instead.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

juniTacacsPlusClientHostKey 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.6
If size is non-zero, packets passed between host and client will be encrypted with the key, otherwise the value of juniTacacsPlusClientKey will be used for the purpose.
Status: current Access: read-create
OBJECT-TYPE    
  JuniKeyString  

juniTacacsPlusClientHostStatus 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.7
Status object, only `createAndGo' and 'destroy' are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniTacacsPlusClientHostOrder 1.3.6.1.4.1.4874.2.2.60.1.2.1.1.8
The search order of this TACACS+ host within all configured TACACS+ hosts. This MIB object indicates the order in which a TACACS+ request will be sent to the TACACS+ hosts until a response is received. The primary host is always the first host to be contacted. The remaining hosts will be contacted in the order that they were created. Should the primary host be deleted, the next host in the search order will become the primary host.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

juniTacacsPlusClientHostStatsTable 1.3.6.1.4.1.4874.2.2.60.1.3.1
This table contains per host statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniTacacsPlusClientHostStatsEntry

juniTacacsPlusClientHostStatsEntry 1.3.6.1.4.1.4874.2.2.60.1.3.1.1
A TACACS+ host statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniTacacsPlusClientHostStatsEntry  

juniTacacsPlusClientHostAuthRequests 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.1
Number of authentication requests sent to the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAuthReplies 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.2
Number of authentication replies received from the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAuthPending 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.3
Number of expected but not received authentication replies from the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAuthTimeouts 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.4
Number of authentication timeouts for the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAuthorRequests 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.5
Number of authorization requests sent to the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAuthorReplies 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.6
Number of authorization replies received from the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAuthorPending 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.7
Number of expected but not received authorization replies from the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAuthorTimeouts 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.8
Number of authorization timeouts for the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAcctRequests 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.9
Number of accounting requests sent to the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAcctReplies 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.10
Number of accounting replies received from the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAcctPending 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.11
Number of expected but not received accounting replies from the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostAcctTimeouts 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.12
Number of accounting timeouts for the host.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniTacacsPlusClientHostDiscontinuityTime 1.3.6.1.4.1.4874.2.2.60.1.3.1.1.13
The value of sysUpTime when corresponding juniTacacsPlusHostConfigEntry was created, this object containg zero if host entry was created during system initializatin.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

juniTacacsPlusClientConformance 1.3.6.1.4.1.4874.2.2.60.2
OBJECT IDENTIFIER    

juniTacacsPlusClientCompliances 1.3.6.1.4.1.4874.2.2.60.2.1
OBJECT IDENTIFIER    

juniTacacsPlusClientGroups 1.3.6.1.4.1.4874.2.2.60.2.2
OBJECT IDENTIFIER    

juniTacacsPlusCompliance 1.3.6.1.4.1.4874.2.2.60.2.1.1
Obsolete compliance statement for entities which implement the Juniper TACACS+ Client MIB.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

juniTacacsPlusCompliance2 1.3.6.1.4.1.4874.2.2.60.2.1.2
The compliance statement for entities which implement the Juniper TACACS+ Client MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

juniTacacsPlusClientCommonGroup 1.3.6.1.4.1.4874.2.2.60.2.2.1
This group defines common configuration parameters for all hosts.
Status: current Access: read-only
OBJECT-GROUP    

juniTacacsPlusClientHostConfigGroup 1.3.6.1.4.1.4874.2.2.60.2.2.2
Obsolete group for defining per host configuration parameters.
Status: obsolete Access: read-only
OBJECT-GROUP    

juniTacacsPlusClientHostStatsGroup 1.3.6.1.4.1.4874.2.2.60.2.2.3
This group defines statistics collected on per host basis.
Status: current Access: read-only
OBJECT-GROUP    

juniTacacsPlusClientHostConfigGroup2 1.3.6.1.4.1.4874.2.2.60.2.2.4
This group defines per host configuration parameters.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor