Juniper-IP-MIB

File: Juniper-IP-MIB.mib (121693 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB IP-FORWARD-MIB Juniper-MIBs
Juniper-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
NOTIFICATION-TYPE Unsigned32 IpAddress
Counter64 Gauge32 TruthValue
RowStatus NOTIFICATION-GROUP MODULE-COMPLIANCE
OBJECT-GROUP InterfaceIndex InterfaceIndexOrZero
ifIndex ipCidrRouteEntry ipCidrRouteNumber
juniMibs JuniEnable JuniIpAddrLessIf
JuniNextIfIndex

Defined Types

JuniIpIfEntry  
SEQUENCE    
  juniIpIfIndex InterfaceIndex
  juniIpIfRowStatus RowStatus
  juniIpIfLowerIfIndex InterfaceIndexOrZero
  juniIpIfType INTEGER
  juniIpIfTypeId Unsigned32
  juniIpIfSAValidationEnable JuniEnable
  juniIpIfCreationType INTEGER
  juniIpIfProfileId Unsigned32
  juniIpIfAlwaysUp JuniEnable
  juniIpIfLoopback JuniEnable
  juniIpIfLoopbackUid InterfaceIndexOrZero
  juniIpIfDebounceTime Integer32
  juniIpIfForwarding JuniEnable
  juniIpIfForceFragmentation JuniEnable
  juniIpIfSharesLowerUid JuniEnable
  juniIpIfFilterOptions Unsigned32
  juniIpIfName OCTET STRING
  juniIpIfArpTimeout Unsigned32
  juniIpIfAdminSpeed Unsigned32
  juniIpIfMultipathMode INTEGER
  juniIpIfSharedNhAddr IpAddress
  juniIpIfSharedNhRouterId Unsigned32
  juniIpIfPrimaryIpAddress IpAddress
  juniIpIfPrimaryIpMask IpAddress
  juniIpIfOperDebounceTime Integer32
  juniIpIfRouterIndex Unsigned32
  juniIpIfInheritNum JuniEnable
  juniIpIfInheritNumUid InterfaceIndexOrZero
  juniIpIfAnalyzerMode INTEGER
  juniIpIfAutoConfigure JuniEnable
  juniIpIfTcpMss Integer32
  juniIpIfInitSeqPrefOper Unsigned32
  juniIpIfInitSeqPrefAdmin Unsigned32
  juniIpIfArpSpoofCheck JuniEnable

JuniIpIfStatsEntry  
SEQUENCE    
  juniIpIfStatsIndex InterfaceIndex
  juniIpIfStatsInPackets Counter64
  juniIpIfStatsInOctets Counter64
  juniIpIfStatsInPoliciedPackets Counter64
  juniIpIfStatsInPoliciedOctets Counter64
  juniIpIfStatsInErrorPackets Counter64
  juniIpIfStatsInSpoofedPackets Counter64
  juniIpIfStatsInForwardedPackets Counter64
  juniIpIfStatsInForwardedOctets Counter64
  juniIpIfStatsOutForwardedPackets Counter64
  juniIpIfStatsOutForwardedOctets Counter64
  juniIpIfStatsOutSchedDropPackets Counter64
  juniIpIfStatsOutSchedDropOctets Counter64
  juniIpIfStatsOutRequestedPackets Counter64
  juniIpIfStatsOutRequestedOctets Counter64
  juniIpIfStatsOutPoliciedPackets Counter64
  juniIpIfStatsOutPoliciedOctets Counter64
  juniIpIfStatsGreenOutSchedDropPackets Counter64
  juniIpIfStatsYellowOutSchedDropPackets Counter64
  juniIpIfStatsRedOutSchedDropPackets Counter64
  juniIpIfStatsGreenOutSchedDropOctets Counter64
  juniIpIfStatsYellowOutSchedDropOctets Counter64
  juniIpIfStatsRedOutSchedDropOctets Counter64

JuniIpIfAssocEntry  
SEQUENCE    
  juniIpIfAssocLowerIfIndex InterfaceIndex
  juniIpIfAssocIpIfIndex InterfaceIndexOrZero

JuniIpAddrEntry  
SEQUENCE    
  juniIpAdEntAddr JuniIpAddrLessIf
  juniIpAdEntIfIndex InterfaceIndex
  juniIpAdEntNetMask IpAddress
  juniIpAdEntBcastAddr Integer32
  juniIpAdEntReasmMaxSize Integer32
  juniIpAdEntRowStatus RowStatus
  juniIpAdEntAdminStatus JuniEnable
  juniIpAdEntArpRspEnable JuniEnable
  juniIpAdEntProxyArpRspEnable JuniEnable
  juniIpAdEntIgmpEnable JuniEnable
  juniIpAdEntDirectedBcastEnable JuniEnable
  juniIpAdEntIcmpRedirectEnable JuniEnable
  juniIpAdEntIcmpMaskReplyEnable JuniEnable
  juniIpAdEntIcmpUnreachEnable JuniEnable
  juniIpAdEntMtu Integer32
  juniIpAdEntUnnumLoopbackIfIndex InterfaceIndexOrZero
  juniIpAdEntIrdpEnable JuniEnable
  juniIpAdEntAccessRouteEnable JuniEnable
  juniIpAdEntAccessRouteHost IpAddress
  juniIpAdEntIsSecondary JuniEnable
  juniIpAdEntUnnumInheritNumIfIndex InterfaceIndexOrZero

JuniIpRouteStaticEntry  
SEQUENCE    
  juniIpRouteStaticDest IpAddress
  juniIpRouteStaticMask IpAddress
  juniIpRouteStaticPref Integer32
  juniIpRouteStaticNextHop JuniIpAddrLessIf
  juniIpRouteStaticRowStatus RowStatus
  juniIpRouteStaticIfIndex Integer32
  juniIpRouteStaticStatus INTEGER
  juniIpRouteStaticNextHopAS Integer32
  juniIpRouteStaticMetric Integer32
  juniIpRouteStaticTag Unsigned32

JuniIpCidrRouteEntry  
SEQUENCE    
  juniIpCidrRoutePref Integer32
  juniIpCidrRouteArea IpAddress
  juniIpCidrRouteTag Unsigned32

JuniIpRouteStaticBFDEntry  
SEQUENCE    
  juniIpRouteStaticBfdEnable TruthValue
  juniIpRouteStaticBfdMinRxInterval Integer32
  juniIpRouteStaticBfdMinTxInterval Integer32
  juniIpRouteStaticBfdMultiplier Integer32

Defined Values

juniIpMIB 1.3.6.1.4.1.4874.2.2.12
The IP Protocol MIB for the Juniper Networks enterprise.
MODULE-IDENTITY    

juniIpObjects 1.3.6.1.4.1.4874.2.2.12.1
OBJECT IDENTIFIER    

juniIpInterface 1.3.6.1.4.1.4874.2.2.12.1.1
OBJECT IDENTIFIER    

juniIpAddress 1.3.6.1.4.1.4874.2.2.12.1.2
OBJECT IDENTIFIER    

juniIpRoute 1.3.6.1.4.1.4874.2.2.12.1.3
OBJECT IDENTIFIER    

juniIpGlobals 1.3.6.1.4.1.4874.2.2.12.1.4
OBJECT IDENTIFIER    

juniIpIfSummary 1.3.6.1.4.1.4874.2.2.12.1.5
OBJECT IDENTIFIER    

juniIpRouteSummary 1.3.6.1.4.1.4874.2.2.12.1.6
OBJECT IDENTIFIER    

juniIpDebounceTime 1.3.6.1.4.1.4874.2.2.12.1.4.1
The time in milliseconds that an event has to be in the same state before being reported.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..60000  

juniIpRouterId 1.3.6.1.4.1.4874.2.2.12.1.4.2
The router-id that this IP router will use to identify itself.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

juniIpSourceRoutingAdminStatus 1.3.6.1.4.1.4874.2.2.12.1.4.3
The administrative setting for source routing.
Status: current Access: read-write
OBJECT-TYPE    
  JuniEnable  

juniIpVpnIdOui 1.3.6.1.4.1.4874.2.2.12.1.4.4
The OUI portion of the VPN identifier. This object must be set coincident with the index portion of the VpnId (juniIpVpnIdIndex), otherwise the set will fail.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 0..16777215  

juniIpVpnIdIndex 1.3.6.1.4.1.4874.2.2.12.1.4.5
The index portion of the VPN identifier. This object must be set coincident with the OUI portion of the VpnId (juniIpVpnOui), otherwise the set will fail.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

juniIpBgpCommunityNewFormat 1.3.6.1.4.1.4874.2.2.12.1.4.6
The BGP community format to be used. Set to true to use the community number, as number format.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniIpBgpAsConfedSetNewFormat 1.3.6.1.4.1.4874.2.2.12.1.4.7
The BGP as confederation set format to be used. Set to true to display the confederation set as a comma separated list, enclosed in squared braces.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniIpIfSummaryTotalIntf 1.3.6.1.4.1.4874.2.2.12.1.5.1
The total number of IP interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpIfSummaryTotalIntfUp 1.3.6.1.4.1.4874.2.2.12.1.5.2
The total number of IP interfaces in operational state UP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpIfSummaryTotalIntfDown 1.3.6.1.4.1.4874.2.2.12.1.5.3
The total number of IP interfaces in operational state DOWN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpIfSummaryTotalIntfProtUp 1.3.6.1.4.1.4874.2.2.12.1.5.4
The total number of IP interfaces in protocol state UP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpIfSummaryTotalIntfProtDown 1.3.6.1.4.1.4874.2.2.12.1.5.5
The total number of IP interfaces in protocol state DOWN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpIfSummaryTotalIntfProtNotPresent 1.3.6.1.4.1.4874.2.2.12.1.5.6
The total number of IP interfaces in protocol state NOT PRESENT.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteUnicastSummary 1.3.6.1.4.1.4874.2.2.12.1.6.1
OBJECT IDENTIFIER    

juniIpRouteMulticastSummary 1.3.6.1.4.1.4874.2.2.12.1.6.2
OBJECT IDENTIFIER    

juniIpRouteSummaryUnicastTotalRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.1
The total number of Unicast IP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastTotalBytes 1.3.6.1.4.1.4874.2.2.12.1.6.1.2
Total number of bytes in unicast route entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastIsisRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.3
The total number of Unicast IP ISIS routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastIsisLevel1Routes 1.3.6.1.4.1.4874.2.2.12.1.6.1.4
The total number of Unicast IP Level 1 ISIS routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastIsisLevel2Routes 1.3.6.1.4.1.4874.2.2.12.1.6.1.5
The total number of Unicast IP Level 2 ISIS routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastRipRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.6
The total number of Unicast IP RIP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastStaticRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.7
The total number of Unicast IP Static routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastConnectedRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.8
The total number of Unicast IP Connected routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastBgpRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.9
The total number of Unicast IP BGP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastOspfRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.10
The total number of Unicast IP OSPF routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastIntraAreaOspfRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.11
The total number of Unicast IP Intra Area OSPF routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastInterAreaOspfRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.12
The total number of Unicast IP Inter Area OSPF routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastExternalOspfRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.13
The total number of Unicast IP External OSPF routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastOtherInternalRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.14
The total number of Unicast IP Other Internal routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastAccessRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.15
The total number of Unicast IP Access routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastIntCreatedAccessHostRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.16
The total number of Unicast IP Internally Created Access Host routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastIntDialoutRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.1.17
The total number of Unicast IP Internally Created Dialout routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastRouteMemoryActive 1.3.6.1.4.1.4874.2.2.12.1.6.1.18
Unicast IP Route Memory Storage.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryUnicastLastRouteAddedOrDeletedIP 1.3.6.1.4.1.4874.2.2.12.1.6.1.19
IP address for last Unicast route added or deleted.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpRouteSummaryUnicastLastRouteAddedOrDeletedMask 1.3.6.1.4.1.4874.2.2.12.1.6.1.20
Subnet mask for last Unicast route added or deleted.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpRouteSummaryUnicastLastRouteAddedOrDeletedClient 1.3.6.1.4.1.4874.2.2.12.1.6.1.21
Client for last Unicast route added or deleted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inValid(0), isis(1), rip(2), ospf(3), static(4), local(5), bgp(6), mbgp(7), staticLow(8), ospfInternal(9), ospfExternal(10), dvmrp(11), dvmrpAggregate(12), hidden(13), access(14), accessInternal(15), dialOut(16), default(17)  

juniIpRouteSummaryUnicastLastRouteAddedOrDeletedDate 1.3.6.1.4.1.4874.2.2.12.1.6.1.22
Date for last Unicast route added or deleted.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..30)  

juniIpRouteSummaryMulticastTotalRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.1
The total number of Multicast IP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastTotalBytes 1.3.6.1.4.1.4874.2.2.12.1.6.2.2
Total number of bytes in multicast route entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastIsisRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.3
The total number of Multicast IP ISIS routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastLevel1IsisRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.4
The total number of Multicast IP Level 1 ISIS routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastLevel2IsisRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.5
The total number of Multicast IP Level 2 ISIS routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastRipRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.6
The total number of Multicast IP RIP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastStaticRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.7
The total number of Multicast IP Static routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastConnectedRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.8
The total number of Multicast IP Connected routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastBgpRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.9
The total number of Multicast IP BGP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastOspfRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.10
The total number of Multicast IP OSPF routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastIntraAreaOspfRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.11
The total number of Multicast IP Intra Area OSPF routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastInterAreaOspfRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.12
The total number of Multicast IP Inter Area OSPF routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastExternalOspfRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.13
The total number of Multicast IP External OSPF routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastOtherInternalRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.14
The total number of Multicast IP Other Internal routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastAccessRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.15
The total number of Multicast IP Access routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastIntCreatedAccessHostRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.16
The total number of Multicast IP Internally Created Access Host routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMultiastIntDialoutRoutes 1.3.6.1.4.1.4874.2.2.12.1.6.2.17
The total number of Multicast IP Internally Created Dialout routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastRouteMemoryActive 1.3.6.1.4.1.4874.2.2.12.1.6.2.18
Multicast IP Route Memory Storage.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniIpRouteSummaryMulticastLastRouteAddedOrDeletedIP 1.3.6.1.4.1.4874.2.2.12.1.6.2.19
IP address for last Multicast route added or deleted.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpRouteSummaryMulticastLastRouteAddedOrDeletedMask 1.3.6.1.4.1.4874.2.2.12.1.6.2.20
Subnet Mask for last Multicast route added or deleted.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpRouteSummaryMulticastLastRouteAddedOrDeletedClient 1.3.6.1.4.1.4874.2.2.12.1.6.2.21
Client for last Multicast route added or deleted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inValid(0), isis(1), rip(2), ospf(3), static(4), local(5), bgp(6), mbgp(7), staticLow(8), ospfInternal(9), ospfExternal(10), dvmrp(11), dvmrpAggregate(12), hidden(13), access(14), accessInternal(15), dialOut(16), default(17)  

juniIpRouteSummaryMulticastLastRouteAddedOrDeletedDate 1.3.6.1.4.1.4874.2.2.12.1.6.2.22
Date for last Multicast route added or deleted.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..30)  

juniIpNextIfIndex 1.3.6.1.4.1.4874.2.2.12.1.1.1
Coordinate ifIndex value allocation for entries in juniIpIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
Status: current Access: read-only
OBJECT-TYPE    
  JuniNextIfIndex  

juniIpIfTable 1.3.6.1.4.1.4874.2.2.12.1.1.2
This table contains entries for IP interfaces present in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniIpIfEntry

juniIpIfEntry 1.3.6.1.4.1.4874.2.2.12.1.1.2.1
Each entry describes the characteristics of an IP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniIpIfEntry  

juniIpIfIndex 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.1
The ifIndex of the IP interface. When creating entries in this table, suitable values for this object are determined by reading juniIpNextIfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

juniIpIfRowStatus 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.2
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIpIfRowStatus juniIpIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniIpIfIndex must have been determined previously, typically by reading juniIpNextIfIndex. The interface identified by a nonzero juniIpIfLowerIfIndex must exist. If juniIpIfType is configured to be 'loopback' or 'null', juniIpIfLowerIfIndex must be set to zero. The selected value of juniIpIfType must be compatible with the underlying media interface identified by juniIpIfLowerIfIndex. Once created, the following objects may not be modified: juniIpIfLowerIfIndex juniIpIfType juniIpIfTypeId A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniIpIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.3
The ifIndex of a media interface over which this IP interface is to be layered. A value of zero is used when juniIpIfType is specified to be loopback(4) or null(5).
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

juniIpIfType 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.4
The type of network interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(0), broadcast(1), pointToPoint(2), nbma(3), loopback(4), null(5), bgpMplsVpn(6), vrfInternal(7), dialout(8)  

juniIpIfTypeId 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.5
A numerical distinguisher relevant for the loopback and null IP interface types. loopback Must be unique for all IP interfaces of this type. null Must be unique for all IP interfaces of this type. (FOR IMPLEMENTATIONS THAT SUPPORT ONE AND ONLY ONE NULL INTERFACE, THE VALUE ZERO MUST BE USED.) For all other IP interface types, this object is not relevant, reports a value of zero when read, and must be given a value of zero if explicitly configured during creation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniIpIfSAValidationEnable 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.6
Enable/disable source address validation on this IP network interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpIfCreationType 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.7
Specify if the interface was created due to static configuration or due to some dynamic event. Dynamic interfaces are not stored in NVS.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

juniIpIfProfileId 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.8
Identified the profile used when creating a dynamic interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniIpIfAlwaysUp 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.9
When enabled, the interface is determined to be up regardless of the state of any lower layer interfaces.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpIfLoopback 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.10
Indicates whether the interface is a loopback type interface. This object has been replaced by juniIpIfInheritNum.
Status: deprecated Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpIfLoopbackUid 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.11
Specify the interface index of a loopback interface whose IP address should be used when sourcing traffic on this interface. Useful for unnumbered interfaces. This object has been replaced by juniIpIfInheritNumUid.
Status: deprecated Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

juniIpIfDebounceTime 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.12
Specifies the time in milliseconds that a layer 2 interface must remain in a state before it is conveyed to the IP layer. Useful for interfaces that experience brief outages that should not constitute a route flap. A value of 0 indicates that the feature is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..60000  

juniIpIfForwarding 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.13
Enable/disable the forwarding of IP traffic to/from this interface. This is currently only applicable to the out-of-band management port.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpIfForceFragmentation 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.14
Force the fragmentation of all IP packets greater than the interface MTU even if the DF bit is set.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpIfSharesLowerUid 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.15
Identifies the interface as sharing a lower interface with another interface vs owning it outright.
Status: current Access: read-only
OBJECT-TYPE    
  JuniEnable  

juniIpIfFilterOptions 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.16
Bit mask to configure the interface to filter packets with IP header options. Currently, either no bits or all bits may be set.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniIpIfName 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.17
Specify the IP interface discriminator for an IP interface not attached to a layer 2 interface with a specific location.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

juniIpIfArpTimeout 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.18
Specify the ARP timeout for this interface in seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniIpIfAdminSpeed 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.19
Set an administrative speed for the interface that overrides the speed learned from the lower layer. A value of 0 indicates no speed is specified.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniIpIfMultipathMode 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.20
Configure the mode this interface should use when forwarding equal-cost multipath traffic.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hashed(1), roundRobin(2)  

juniIpIfSharedNhAddr 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.21
The IP address of either a direct or indirect next-hop toward which this shared interface should point.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

juniIpIfSharedNhRouterId 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.22
The identifier for the domain of a virtual router in which the juniIpIfSharedNhAddr should be resolved.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniIpIfPrimaryIpAddress 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.23
The IP address of the primary IP network on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpIfPrimaryIpMask 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.24
The IP address mask of the primary IP network on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpIfOperDebounceTime 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.25
Indicates the operational time in milliseconds that a layer2 interface must remain in a state before it is conveyed to the IP layer. Useful for interfaces that experience brief outages that should not constitute a route flap. A value of 0 indicates that the feature is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..60000  

juniIpIfRouterIndex 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.26
The index or ID of the router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniIpIfInheritNum 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.27
Indicates whether this numbered interface is referenced by unnumbered interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  JuniEnable  

juniIpIfInheritNumUid 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.28
Specify the interface index of a numbered interface whose IP address should be used when sourcing traffic on this interface. Useful for unnumbered interfaces.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

juniIpIfAnalyzerMode 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.29
Used to set the interface to analyzer mode. When enabled(1), all IP packets entering this interface and all non-mirror IP packets leaving this interface will be dropped. The value default(2) specifies that this interface will be the default analyzer port for the virtual-router where the interface resides.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1), default(2)  

juniIpIfAutoConfigure 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.30
When enabled, IP subscriber interfaces are created dynamically based on any attributes defined in the service-profile and the rules associated with the DCM profile selected for this subscriber.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpIfTcpMss 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.31
Configures TCP MSS value for an IP interface. When configured, MSS value of TCP SYN packets received or transmitted on the interface will be compared with the configured value and lowest of the two will replace the value in the packet.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 160..10240  

juniIpIfInitSeqPrefOper 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.32
Indicates the operational warm-restart replay initial sequence preference value for an IP interface. Following an HA SRP switchover, high-preference (value 1) IP interfaces are replayed first, followed by static routes, and then low-preference (value 0) IP interfaces. This allows static routes that are dependent on high-preference interfaces to be resolved and routing protocols to exchange information with peers over high-preference interfaces before low-preference interfaces are replayed. An IP interface is designated as high-preference either (1) implicitly by configuring an IGP or PIM protocol on that interface, or (2) explicitly by juniIpIfInitSeqPrefAdmin (or CLI) configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniIpIfInitSeqPrefAdmin 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.33
Configures the warm-restart replay initial sequence preference value for an IP interface. See the juniIpIfInitSeqPrefOper description for more information.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1  

juniIpIfArpSpoofCheck 1.3.6.1.4.1.4874.2.2.12.1.1.2.1.34
When enabled, IP ARP spoof checking is performed on ARP packets received on the IP interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpIfStatsTable 1.3.6.1.4.1.4874.2.2.12.1.1.3
This table contains entries for IP interfaces present in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniIpIfStatsEntry

juniIpIfStatsEntry 1.3.6.1.4.1.4874.2.2.12.1.1.3.1
Each entry contains statistics for an IP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniIpIfStatsEntry  

juniIpIfStatsIndex 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.1
The ifIndex of the IP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

juniIpIfStatsInPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.2
The number of packets received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsInOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.3
The number of octets received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsInPoliciedPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.4
The number of packets dropped due to rate limiters attached to this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsInPoliciedOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.5
The number of octets dropped due to rate limiters attached to this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsInErrorPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.6
The number of packets received with errors on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsInSpoofedPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.7
The number of packets received on this interface with destination unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsInForwardedPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.8
The number of packets received on this interface that were forwarded by any interface in the system.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsInForwardedOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.9
The number of octets received on this interface that were forwarded by any interface in the system.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsOutForwardedPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.10
The number of packets forwarded by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsOutForwardedOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.11
The number of octets forwarded by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsOutSchedDropPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.12
The number of packets dropped at this interface due to output queue congestion.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsOutSchedDropOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.13
The number of octets dropped at this interface due to output queue congestion.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsOutRequestedPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.14
The number of packets requested for transmission at this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsOutRequestedOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.15
The number of octets requested for transmission at this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsOutPoliciedPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.16
The number of packets dropped due to rate limiters attached to this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsOutPoliciedOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.17
The number of octets dropped due to rate limiters attached to this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsGreenOutSchedDropPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.18
The number of packets dropped at this interface due to output queue congestion in the green output queue. The green output queue has lowest drop probability.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsYellowOutSchedDropPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.19
The number of packets dropped at this interface due to output queue congestion in the yellow output queue. The yellow output queue has medium level drop probability.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsRedOutSchedDropPackets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.20
The number of packets dropped at this interface due to output queue congestion in the red output queue. The red output queue has highest level drop probability.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsGreenOutSchedDropOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.21
The number of octets dropped at this interface due to output queue congestion in the green output queue. The green output queue has the lowest drop probability.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsYellowOutSchedDropOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.22
The number of octets dropped at this interface due to output queue congestion in the yellow output queue. The yellow output queue has the medium drop probability.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfStatsRedOutSchedDropOctets 1.3.6.1.4.1.4874.2.2.12.1.1.3.1.23
The number of octets dropped at this interface due to output queue congestion in the red output queue. The red output queue has the highest drop probability.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

juniIpIfAssocTable 1.3.6.1.4.1.4874.2.2.12.1.1.4
This table contains entries of interfaces present in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniIpIfAssocEntry

juniIpIfAssocEntry 1.3.6.1.4.1.4874.2.2.12.1.1.4.1
Each entry in this table returns the ifIndex of the IP interface associated with the lower layer ifIndex supplied as the index to this table. The purpose of this table is to translate L2 interfaces to corresponding L3 interfaces for billing applications. Since interesting billing related statistics are kept at L3, it is often useful to know the L2-L3 relationship. Note that this table is not confined to L2-L3 relationships. Any interface sublayer can be used to access this table to determine the relationship with the L3 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniIpIfAssocEntry  

juniIpIfAssocLowerIfIndex 1.3.6.1.4.1.4874.2.2.12.1.1.4.1.1
The ifIndex of the lower layer interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

juniIpIfAssocIpIfIndex 1.3.6.1.4.1.4874.2.2.12.1.1.4.1.2
The ifIndex of the IP interface associated with the lower layer juniIpIfAssocLowerIfIndex. In cases where there is not a 1 to 1 relationship between lower layer and higher layer IP interface, a zero value juniIpIfAssocIpIfIndex is returned; this includes the case where an IP interface has not yet been configued at the top of the interface column. An example usage of this table: Assume a user needs to know the ifIndex relationship for all interfaces with the L3 IP interface. Then starting at the bottom of the stack below, the ATM and AAL5's ifIndex would be used to access the table. The agent will return 0 for each of these cases because multiple customer's traffic is demultiplexed at these levels. IP_1 PPP IP_2 ATM1483_1 ATM1483_2 \ / AAL5 ATM If the ATM1483_1 ifIndex is used to access this table, then the value of juniIpIfAssocLowerIfIndex will be set to the ifIndex of IP_1. Similarily, if the ATM1483_2 ifIndex is used to access this table, the juniIpifAssocLowerIfIndex will set to the ifIndex of IP_2.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

juniIpAddrGlobals 1.3.6.1.4.1.4874.2.2.12.1.2.1
OBJECT IDENTIFIER    

juniIpArpTimeout 1.3.6.1.4.1.4874.2.2.12.1.2.1.1
Timeout, in seconds, for ARP requests issued by this entity.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 1..60  

juniIpAddrTable 1.3.6.1.4.1.4874.2.2.12.1.2.2
IP addressing information for this entity's IP network interfaces. Representation of both numbered and unnumbered IP interfaces is supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniIpAddrEntry

juniIpAddrEntry 1.3.6.1.4.1.4874.2.2.12.1.2.2.1
IP addressing information for one of this entity's IP network interfaces. This interface could be either numbered or unnumbered. The following objects correspond to (read-only) counterparts in the IP-MIB ipAddrTable: juniIpAdEntAddr juniIpAdEntIfIndex juniIpAdEntNetMask juniIpAdEntBcastAddr juniIpAdEntReasmMaxSize
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniIpAddrEntry  

juniIpAdEntAddr 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.1
The IP address for a numbered IP network interface, if this object's value has the form 'a.b.c.d', where 'a' is nonzero; or, the ifIndex (interpreting the low 24 bits of this value as an integer) of an unnumbered ('address-less') IP interface, if this object's value has the form '0.b.c.d'.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniIpAddrLessIf  

juniIpAdEntIfIndex 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.2
The ifIndex of the network interface to which this entry's IP addressing mode pertains.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

juniIpAdEntNetMask 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.3
The IP subnet mask associated with the IP address of this entry. The network and host bit fields of the mask are filled with 1's and 0's, respectively. If this entry represents an unnumbered IP interface, this object should have a value of all ones.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

juniIpAdEntBcastAddr 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.4
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the IP network interface associated with this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

juniIpAdEntReasmMaxSize 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.5
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

juniIpAdEntRowStatus 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.6
Controls the creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create entries for both numbered and unnumbered IP interfaces, the following entry objects MUST be explicitly configured: juniIpAdEntRowStatus juniIpAdEntIfIndex To create an entry for a numbered IP interface, the following conditions must also hold: To create an entry for an unnumbered IP interface, the following conditions must also hold: juniIpAdEntUnnumInheritNumIfIndex must be configured with a nonzero ifIndex value of an IP numbered interface.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniIpAdEntAdminStatus 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.7
Enable/disable operation of IP on this IP network interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntArpRspEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.8
Enable/disable ARP response on this IP network interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntProxyArpRspEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.9
Enable/disable proxy ARP response on this IP network interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntIgmpEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.10
Enable/disable IGMP operation on this IP network interface.
Status: deprecated Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntDirectedBcastEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.11
Enable/disable forwarding of directed broadcasts on this IP network interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntIcmpRedirectEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.12
Enable/disable transmission of ICMP Redirect messages on this IP network interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntIcmpMaskReplyEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.13
Enable/disable transmission of ICMP Mask Reply messages on this IP network interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntIcmpUnreachEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.14
Enable/disable transmission of ICMP Unreachable messages on this IP network interface.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntMtu 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.15
The configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

juniIpAdEntUnnumLoopbackIfIndex 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.16
For unnumbered interfaces, the ifIndex of the IP loopback interface whose IP address is used as the source IP address for IP packets transmitted on the unnumbered network. For numbered interfaces, this object has a value of zero. This object has been replaced by juniIpAdEntUnnumInheritNumIfIndex.
Status: deprecated Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

juniIpAdEntIrdpEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.17
Controls whether ICMP Router Discovery Protocol operation is permitted to be sent on this network.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntAccessRouteEnable 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.18
If enabled, then establishment/loss of a point-to-point network connection causes a host route for the remote host to be created/deleted automatically.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntAccessRouteHost 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.19
If an access route has been established, the IP address of the remote host is reported by this object; otherwise, this object contains the value 0.0.0.0.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpAdEntIsSecondary 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.20
If enabled, then the IP address corresponding to this entry is a secondary address. If disabled, then the IP address corresponding to this entry is te primary address.
Status: current Access: read-create
OBJECT-TYPE    
  JuniEnable  

juniIpAdEntUnnumInheritNumIfIndex 1.3.6.1.4.1.4874.2.2.12.1.2.2.1.21
For unnumbered interfaces, the ifIndex of the IP numbered interface whose IP address is used as the source IP address for IP packets transmitted on the unnumbered network. For numbered interfaces, this object has a value of zero.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

juniIpRouteGlobals 1.3.6.1.4.1.4874.2.2.12.1.3.1
OBJECT IDENTIFIER    

juniIpRouteLimit 1.3.6.1.4.1.4874.2.2.12.1.3.1.1
Maximum number of IP routes maintained by this entity. Setting a value lower than the current number of routes prevents additional routes from being learned or configured, but does not cause existing excess routes to be deleted to enforce the new limit.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32  

juniIpRouteTableLimit 1.3.6.1.4.1.4874.2.2.12.1.3.1.2
The VRF Route Table Maximum Number of Routes Limit.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

juniIpRouteTableWarnPercent 1.3.6.1.4.1.4874.2.2.12.1.3.1.3
The VRF Route Table Percentage of the Route Limit at which to issue a warning. The percentage is only valid when juniIpRouteTableWarnOnly is false. It must be set to 0 if juniIpRouteTableWarnOnly is true.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

juniIpRouteTableWarnOnly 1.3.6.1.4.1.4874.2.2.12.1.3.1.4
The VRF Route Table Maximum Number of Routes Warning flag. Do not actually limit the number of routes in the table
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniIpRouteTableWarnThreshold 1.3.6.1.4.1.4874.2.2.12.1.3.1.5
The computed number of route to issue a warning. If juniIpRouteTableWarnOnly is true this value will be juniIpRouteTableLimit and if juniIpRouteTableWarnOnly is false it will be juniIpRouteTableLimit * juniIpRouteTableWarnPercentage
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniIpRouteStaticTable 1.3.6.1.4.1.4874.2.2.12.1.3.2
Table of static routes configured on this entity. The object definitions and indexing for this table are chosen to closely align with the IP-FORWARD-MIB's ipCidrRouteTable. This table serves three purposes: 1. Provide the means for configuring static routes. 2. Provide an efficient view of static routes (otherwise they must be observed by traversing the entire routing table). 3. Provide view of static routes configured on network interfaces that are currently inactive. (In this implementation, static routes configured on inactive interfaces are not visible in the routing table.)
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniIpRouteStaticEntry

juniIpRouteStaticEntry 1.3.6.1.4.1.4874.2.2.12.1.3.2.1
A static route.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniIpRouteStaticEntry  

juniIpRouteStaticDest 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.1
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the juniIpRouteStaticMask object is not equal to x.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpRouteStaticMask 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the juniIpRouteStaticDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the juniIpRouteStaticMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the juniIpRouteStaticDest object is not equal to juniIpRouteStaticDest.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpRouteStaticPref 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.3
The preference of this static route. Higher values correspond to higher preference. A static route with preference of zero will never be installed as an active route.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

juniIpRouteStaticNextHop 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.4
The address of the next hop toward the destination.
Status: current Access: read-only
OBJECT-TYPE    
  JuniIpAddrLessIf  

juniIpRouteStaticRowStatus 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.5
The row status variable, used according to row installation and removal conventions.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniIpRouteStaticIfIndex 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.6
The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of zero means the router should automatically determine the interface through which the specified next-hop address is reached. An implementation may disallow non-zero values from being configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

juniIpRouteStaticStatus 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.7
The operational status of this static route. active(0) indicates this route is currently being used to reach the specified destination. inactive(1) indicates this route is considered valid, but currently is superseded by another routing table entry for the destination, having a higher preference value. incomplete(2) indicates this route entry contains information that is incomplete, or is inconsistent with other system configuration (for example, the interface specified in juniIpRouteStaticIfIndex does not exist).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(0), inactive(1), incomplete(2)  

juniIpRouteStaticNextHopAS 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.8
The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

juniIpRouteStaticMetric 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.9
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

juniIpRouteStaticTag 1.3.6.1.4.1.4874.2.2.12.1.3.2.1.10
A tag value for this static route.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

juniIpCidrRouteTable 1.3.6.1.4.1.4874.2.2.12.1.3.3
Table of routes active on this entity. This table is an augmentation of the IP-FORWARD-MIB's ipCidrRouteTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniIpCidrRouteEntry

juniIpCidrRouteEntry 1.3.6.1.4.1.4874.2.2.12.1.3.3.1
Additional attributes of an active route.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniIpCidrRouteEntry  

juniIpCidrRoutePref 1.3.6.1.4.1.4874.2.2.12.1.3.3.1.1
The preference of this route. Higher values correspond to higher preference.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

juniIpCidrRouteArea 1.3.6.1.4.1.4874.2.2.12.1.3.3.1.2
The Area to which this route pertains. A value of 0.0.0.0 indicates no area is identified.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

juniIpCidrRouteTag 1.3.6.1.4.1.4874.2.2.12.1.3.3.1.3
A tag value for this route.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

juniIpRouteStaticBFDTable 1.3.6.1.4.1.4874.2.2.12.1.3.4
The Juniper IP interface table describes the BFD-specific characteristics of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniIpRouteStaticBFDEntry

juniIpRouteStaticBFDEntry 1.3.6.1.4.1.4874.2.2.12.1.3.4.1
The Juniper IP interface table describes the BFD-specific characteristics of one interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniIpRouteStaticBFDEntry  

juniIpRouteStaticBfdEnable 1.3.6.1.4.1.4874.2.2.12.1.3.4.1.1
This variable indicates whether BFD session on the interface is active or not
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

juniIpRouteStaticBfdMinRxInterval 1.3.6.1.4.1.4874.2.2.12.1.3.4.1.2
This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 100..65535  

juniIpRouteStaticBfdMinTxInterval 1.3.6.1.4.1.4874.2.2.12.1.3.4.1.3
This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 100..65535  

juniIpRouteStaticBfdMultiplier 1.3.6.1.4.1.4874.2.2.12.1.3.4.1.4
This variable specifies detection-multiplier
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

juniIpTrapEnables 1.3.6.1.4.1.4874.2.2.12.2
OBJECT IDENTIFIER    

juniIpTraps 1.3.6.1.4.1.4874.2.2.12.3
OBJECT IDENTIFIER    

juniIpTrapPrefix 1.3.6.1.4.1.4874.2.2.12.3.0
OBJECT IDENTIFIER    

juniIpSaValidateTrapEnable 1.3.6.1.4.1.4874.2.2.12.2.1
Set to true to enable source address validation traps.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniIpRouteTableTrapRouteLimitExceeded 1.3.6.1.4.1.4874.2.2.12.3.0.1
The juniIpRouteTableTrapRouteLimitExceeded Trap indicates that the configured route Table Limit has been exceeded. Issued once every 5 minutes that the limit is being exceeded.
Status: current Access: read-write
NOTIFICATION-TYPE    

juniIpRouteTableTrapRouteLimitRemove 1.3.6.1.4.1.4874.2.2.12.3.0.2
The juniIpRouteTableTrapRouteTableLimitRemove Trap indicates that routes have been freed up for 30 seconds and the Route Table Limit is no longer being violated. Issued once.
Status: current Access: read-write
NOTIFICATION-TYPE    

juniIpRouteTableTrapWarnThresholdExceeded 1.3.6.1.4.1.4874.2.2.12.3.0.3
The juniIpRouteTableTrapWarnThresholdExceeded Trap indicates that the computed warning threshold has been exceeded. Issued once every 5 minutes that the warning threshold is being execeeded.
Status: current Access: read-write
NOTIFICATION-TYPE    

juniIpTrapSaValidationFailure 1.3.6.1.4.1.4874.2.2.12.3.0.4
The juniIpTrapSaValidationFailure Trap indicates that a source address validation failure occurred on an interface. The interface on which the failure occurred, the source ip address and the destination ip address of the packet causing the failure are returned.
Status: current Access: read-write
NOTIFICATION-TYPE    

juniIpMIBNotificationObjects 1.3.6.1.4.1.4874.2.2.12.3.1
OBJECT IDENTIFIER    

juniIpIfSaValFailSrcIpAddr 1.3.6.1.4.1.4874.2.2.12.3.1.1
The source IP address of the packet that caused the last source address validation failure on the IP interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

juniIpIfSaValFailDestIpAddr 1.3.6.1.4.1.4874.2.2.12.3.1.2
The destination IP address of the packet that caused the last source address validation failure on the IP interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

juniIpConformance 1.3.6.1.4.1.4874.2.2.12.4
OBJECT IDENTIFIER    

juniIpCompliances 1.3.6.1.4.1.4874.2.2.12.4.1
OBJECT IDENTIFIER    

juniIpGroups 1.3.6.1.4.1.4874.2.2.12.4.2
OBJECT IDENTIFIER    

juniIpCompliance 1.3.6.1.4.1.4874.2.2.12.4.1.1
Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when the IP interface and IP address groups changed and the global objects were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance2 1.3.6.1.4.1.4874.2.2.12.4.1.2
Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when the juniIpIfAssocTable was added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance3 1.3.6.1.4.1.4874.2.2.12.4.1.3
Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when the QoS related objects were obsoleted.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance4 1.3.6.1.4.1.4874.2.2.12.4.1.4
Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when the QoS related objects were obsoleted.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance5 1.3.6.1.4.1.4874.2.2.12.4.1.5
Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when support was added for router index and unnumbered interfaces referencing numbered interfaces.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance6 1.3.6.1.4.1.4874.2.2.12.4.1.6
Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when interface mirroring and interface auto configure support was added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance7 1.3.6.1.4.1.4874.2.2.12.4.1.7
Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when interface TCP MSS feature was added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance8 1.3.6.1.4.1.4874.2.2.12.4.1.8
Obsolete compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when juniIpVpnIdOui and juniIpVpnIdIndex were obsoleted.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance9 1.3.6.1.4.1.4874.2.2.12.4.1.9
The compliance statement for entities which implement the Juniper IP MIB.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance10 1.3.6.1.4.1.4874.2.2.12.4.1.10
The compliance statement for entities which implement the Juniper IP MIB.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance11 1.3.6.1.4.1.4874.2.2.12.4.1.11
The compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when juniIpVpnIdOui and juniIpVpnIdIndex were obsoleted.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance12 1.3.6.1.4.1.4874.2.2.12.4.1.12
The compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when juniIpIfInitSeqPrefOper and juniIpIfInitSeqPrefAdmin were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance13 1.3.6.1.4.1.4874.2.2.12.4.1.13
The compliance statement for entities which implement the Juniper IP MIB. This statement became obsolete when juniIpIfArpSpoofCheck was added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpCompliance14 1.3.6.1.4.1.4874.2.2.12.4.1.14
The compliance statement for entities which implement the Juniper IP MIB.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

juniIpInterfaceGroup 1.3.6.1.4.1.4874.2.2.12.4.2.1
Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when new objects were added to the juniIpIfTable and the juniIpIfStatsTable.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpAddressGroup 1.3.6.1.4.1.4874.2.2.12.4.2.2
Obsolete collection of objects for managing IP address capabilities in a Juniper product. This group became obsolete when juniIpAdEntIgmpEnable was deprecated and juniIpAdEntIsSecondary was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpRouteGroup 1.3.6.1.4.1.4874.2.2.12.4.2.3
Obsolete collection of objects for managing IP routing capabilities in a Juniper product. This group became obsolete when juniIpRouteLimit was obsoleted.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpGlobalGroup 1.3.6.1.4.1.4874.2.2.12.4.2.4
Obsolete collection of IP global objects for managing instances of IP in a Juniper product. This group became obsolete when BGP new format objects were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceGroup2 1.3.6.1.4.1.4874.2.2.12.4.2.5
Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfAssocTable was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpAddressGroup2 1.3.6.1.4.1.4874.2.2.12.4.2.6
Obsolete collection of objects for managing IP address capabilities in a Juniper product. This group became obsolete when when juniIpArpTimeout was obsoleted.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceGroup3 1.3.6.1.4.1.4874.2.2.12.4.2.7
Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the QoS related objects were obsoleted.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceGroup4 1.3.6.1.4.1.4874.2.2.12.4.2.8
Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfInheritNum and juniIpIfInheritNumUid objects were added and juniIpIfLoopback and juniIpIfLoopbackUid were deprecated.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpAddressGroup3 1.3.6.1.4.1.4874.2.2.12.4.2.9
Obsolete collection of objects for managing IP address capabilities in a Juniper product. This group became obsolete when the juniIpAdEntUnnumInheritNumIfIndex object was added and juniIpAdEntUnnumLoopbackIfIndex was deprecated.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpRouteGroup2 1.3.6.1.4.1.4874.2.2.12.4.2.10
A collection of objects for managing IP routing capabilities in a Juniper product.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpGlobalGroup2 1.3.6.1.4.1.4874.2.2.12.4.2.11
Obsolete collection of IP global objects for managing instances of IP in a Juniper product. This group became obsolete when juniIpVpnIdOui and juniIpVpnIdIndex were obsoleted.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceGroup5 1.3.6.1.4.1.4874.2.2.12.4.2.12
Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfAnalyzerMode object was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpAddressGroup4 1.3.6.1.4.1.4874.2.2.12.4.2.13
A collection of objects for managing IP address capabilities in a Juniper product.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceDeprecatedGroup 1.3.6.1.4.1.4874.2.2.12.4.2.14
A collection of deprecated objects for managing IP interface capabilities in a Juniper product. This group may continue to be support on some products.
Status: deprecated Access: accessible-for-notify
OBJECT-GROUP    

juniIpAddressDeprecatedGroup 1.3.6.1.4.1.4874.2.2.12.4.2.15
A collection of deprecated objects for managing IP address capabilities in a Juniper product. This group may continue to be support on some products.
Status: deprecated Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceGroup6 1.3.6.1.4.1.4874.2.2.12.4.2.16
Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfTcpMss object was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpIfSummaryGroup 1.3.6.1.4.1.4874.2.2.12.4.2.17
A collection of IP Interface Summary Statistics.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceGroup7 1.3.6.1.4.1.4874.2.2.12.4.2.18
Obsolete collection of objects for managing IP interface capabilities in a Juniper product. This group became obsolete when the juniIpIfInitSeqPrefOper and juniIpIfInitSeqPrefAdmin objects were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpGlobalGroup3 1.3.6.1.4.1.4874.2.2.12.4.2.19
A collection of IP global objects for managing instances of IP in a Juniper product.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniIpRouteGroup3 1.3.6.1.4.1.4874.2.2.12.4.2.20
A collection of objects for managing IP routing capabilities in a Juniper product.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniIpNotificationGroup 1.3.6.1.4.1.4874.2.2.12.4.2.21
The management notifications pertaining to IP Route Table state changes.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-GROUP    

juniIpNotificationGroup1 1.3.6.1.4.1.4874.2.2.12.4.2.22
The management notifications pertaining to IP.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

juniIpMIBNotificationObjectsGroup 1.3.6.1.4.1.4874.2.2.12.4.2.23
The management notification objects pertaining to IP.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniIpRouteSummaryGroup 1.3.6.1.4.1.4874.2.2.12.4.2.24
The management notifications pertaining to IP Route Table state changes.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniIpRouteStaticBFDGroup 1.3.6.1.4.1.4874.2.2.12.4.2.25
The management notifications pertaining to IP Route Table state changes.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceGroup8 1.3.6.1.4.1.4874.2.2.12.4.2.26
A collection of objects for managing IP interface capabilities in a Juniper product.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniIpInterfaceGroup9 1.3.6.1.4.1.4874.2.2.12.4.2.27
A collection of objects for managing IP interface capabilities in a Juniper product.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor