JUNIPER-USER-AAA-MIB

File: JUNIPER-USER-AAA-MIB.mib (47276 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IPV6-TC
JUNIPER-MIMSTP-MIB JUNIPER-SMI INET-ADDRESS-MIB

Imported symbols

Counter64 IpAddress Integer32
Counter32 Unsigned32 NOTIFICATION-TYPE
MODULE-IDENTITY OBJECT-TYPE TEXTUAL-CONVENTION
DisplayString RowStatus TruthValue
Ipv6AddressPrefix Ipv6AddressIfIdentifier Ipv6Address
EnabledStatus jnxUserAAAMibRoot InetAddressType
InetAddress InetAddressPrefixLength

Defined Types

JnxAuthenticateType  
There several way to authenticate a user, these are the types: radius - authentication via a radius server. local - local authenticaiton. ldap - authentication via a LDAP server. securid- authentication via RSA's SecurID authentication server jsrc - authentication via jsrc
TEXTUAL-CONVENTION    
  INTEGER none(0), radius(1), local(2), ldap(3), securid(4), jsrc(5)  

JnxAccountingType  
There several choices for accounting, these are the types: radius - accounting via a radius server. local - local accounting. ldap - accounting via a LDAP server. securid- accounting via RSA's SecurID accounting server jsrc - accounting via jsrc
TEXTUAL-CONVENTION    
  INTEGER none(0), radius(1), local(2), ldap(3), securid(4), jsrc(5)  

JnxAuthorizationType  
There several choices for authorization, these are the types: radius - authorization via a radius server. local - local authorization. ldap - authorization via a LDAP server. securid- authorization via RSA's SecurID authorization server jsrc - authorization via jsrc
TEXTUAL-CONVENTION    
  INTEGER none(0), radius(1), local(2), ldap(3), securid(4), jsrc(5)  

JnxProvisioningType  
There several choices for provisioning, these are the types: radius - provisioning via a radius server. local - local provisioning. ldap - provisioning via a LDAP server. securid- provisioning via RSA's SecurID provisioning server jsrc - provisioning via jsrc
TEXTUAL-CONVENTION    
  INTEGER none(0), radius(1), local(2), ldap(3), securid(4), jsrc(5)  

JnxAuthStatEntry  
SEQUENCE    
  jnxUserAAAStatAuthType JnxAuthenticateType
  jnxUserAAAStatRequestReceived Counter64
  jnxUserAAAStatAccessAccepted Counter64
  jnxUserAAAStatAccessRejected Counter64

JnxUserAAAAccessPool  
SEQUENCE    
  jnxUserAAAAccessPoolIdent Unsigned32
  jnxUserAAAAccessPoolRoutingInstance DisplayString
  jnxUserAAAAccessPoolName DisplayString
  jnxUserAAAAccessPoolLinkName DisplayString
  jnxUserAAAAccessPoolFamilyType InetAddressType
  jnxUserAAAAccessPoolInetNetwork InetAddress
  jnxUserAAAAccessPoolInetPrefixLength InetAddressPrefixLength
  jnxUserAAAAccessPoolOutOfMemory Counter64
  jnxUserAAAAccessPoolOutOfAddresses Counter64
  jnxUserAAAAccessPoolAddressTotal Counter64
  jnxUserAAAAccessPoolAddressesInUse Counter64
  jnxUserAAAAccessPoolAddressUsage INTEGER
  jnxUserAAAAccessPoolAddressUsageHigh INTEGER
  jnxUserAAAAccessPoolAddressUsageAbate INTEGER

JnxUserAAADomainEntry  
SEQUENCE    
  jnxUserAAADomainName DisplayString
  jnxUserAAADomainStripDomain TruthValue
  jnxUserAAADomainLogicalSystem DisplayString
  jnxUserAAADomainRoutingInstance DisplayString
  jnxUserAAADomainAddrPoolName DisplayString
  jnxUserAAADomainDynamicPorfile DisplayString
  jnxUserAAADomainTargetLogicalSystem DisplayString
  jnxUserAAADomainTargetRoutingInstance DisplayString
  jnxUserAAADomainTunnelProfile DisplayString
  jnxUserAAADomainDynamicProfile DisplayString
  jnxUserAAADomainStripUsername INTEGER
  jnxUserAAADomainOverridePassword TruthValue

JnxUserAAADomainTunnelEntry  
SEQUENCE    
  jnxUserAAADomainTunnelName OCTET STRING
  jnxUserAAADomainTunnelDefId Integer32
  jnxUserAAADomainTunnelPreference Integer32
  jnxUserAAADomainTunnelRemoteGwName DisplayString
  jnxUserAAADomainTunnelRemoteGwAddress IpAddress
  jnxUserAAADomainTunnelSourceGwName DisplayString
  jnxUserAAADomainTunnelSourceGwAddress IpAddress
  jnxUserAAADomainTunnelSecret DisplayString
  jnxUserAAADomainTunnelLogicalSystems DisplayString
  jnxUserAAADomainTunnelRoutingInstance DisplayString
  jnxUserAAADomainTunnelMedium INTEGER
  jnxUserAAADomainTunnelType INTEGER
  jnxUserAAADomainTunnelId DisplayString
  jnxUserAAADomainTunnelMaxSessions Unsigned32

JnxUserAAADomainPadnEntry  
SEQUENCE    
  jnxUserAAADomainPadnIpAddress IpAddress
  jnxUserAAADomainPadnIpMask IpAddress
  jnxUserAAADomainPadnDistance Integer32

JnxUserAAAAccessProfileEntry  
SEQUENCE    
  jnxUserAAAAccessProfileName DisplayString
  jnxUserAAAAccessProfileAuthenticationOrder OCTET STRING
  jnxUserAAAAccessProfileAccountingOrder OCTET STRING
  jnxUserAAAAccessProfileAuthorizationOrder OCTET STRING
  jnxUserAAAAccessProfileProvisioningOrder OCTET STRING
  jnxUserAAAAccessProfileAccStopOnFailure TruthValue
  jnxUserAAAAccessProfileAccStopOnDeny TruthValue
  jnxUserAAAAccessProfileImmediateUpdate TruthValue
  jnxUserAAAAccessProfileCoaImmediateUpdate TruthValue
  jnxUserAAAAccessProfileInterval Integer32
  jnxUserAAAAccessProfileStatType INTEGER

Defined Values

jnxUserAAAMib 1.3.6.1.4.1.2636.3.51.1
This module defines the objects pertaining to User authentication, authorization and accounting
MODULE-IDENTITY    

jnxUserAAANotifications 1.3.6.1.4.1.2636.3.51.1.0
OBJECT IDENTIFIER    

jnxUserAAAObjects 1.3.6.1.4.1.2636.3.51.1.1
OBJECT IDENTIFIER    

jnxUserAAAGlobalStats 1.3.6.1.4.1.2636.3.51.1.1.1
OBJECT IDENTIFIER    

jnxUserAAAAccessAuthStats 1.3.6.1.4.1.2636.3.51.1.1.2
OBJECT IDENTIFIER    

jnxUserAAATrapVars 1.3.6.1.4.1.2636.3.51.1.1.3
OBJECT IDENTIFIER    

jnxUserAAAAccessPool 1.3.6.1.4.1.2636.3.51.1.1.4
OBJECT IDENTIFIER    

jnxUserAAAAssignment 1.3.6.1.4.1.2636.3.51.1.1.5
OBJECT IDENTIFIER    

jnxUserAAAAccessProfile 1.3.6.1.4.1.2636.3.51.1.1.6
OBJECT IDENTIFIER    

jnxTotalAuthenticationRequests 1.3.6.1.4.1.2636.3.51.1.1.1.1
Total authentication requests received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxTotalAuthenticationResponses 1.3.6.1.4.1.2636.3.51.1.1.1.2
Total authentication responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxUserAAAStatTable 1.3.6.1.4.1.2636.3.51.1.1.2.1
This table exposes the user authentication statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxAuthStatEntry

jnxUserAAAStatEntry 1.3.6.1.4.1.2636.3.51.1.1.2.1.1
Statistic entry collects for authentication.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxAuthStatEntry  

jnxUserAAAStatAuthType 1.3.6.1.4.1.2636.3.51.1.1.2.1.1.1
The entry indicates the authentication type. It uniquely identifies the statistics counters related to its authentication.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxAuthenticateType  

jnxUserAAAStatRequestReceived 1.3.6.1.4.1.2636.3.51.1.1.2.1.1.2
The number of request received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxUserAAAStatAccessAccepted 1.3.6.1.4.1.2636.3.51.1.1.2.1.1.3
The number of access granted. It is an aggregated statistics for this type of authenticaiton.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxUserAAAStatAccessRejected 1.3.6.1.4.1.2636.3.51.1.1.2.1.1.4
This number of access request rejected. It is an aggregated statistics for this type of authentication.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxUserAAAServerName 1.3.6.1.4.1.2636.3.51.1.1.3.1
The server name which identifies the authentication server.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

jnxUserAAAAddressPoolName 1.3.6.1.4.1.2636.3.51.1.1.3.2
The address pool name which identifies the local address pool.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

jnxAccessAuthServiceUp 1.3.6.1.4.1.2636.3.51.1.0.1
An access authentication trap signifies that the specified service has started.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxAccessAuthServiceDown 1.3.6.1.4.1.2636.3.51.1.0.2
An access authentication trap signifies that the specified service has been stopped.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxAccessAuthServerDisabled 1.3.6.1.4.1.2636.3.51.1.0.3
An access authentication trap signifies that the External authentication server is not responding.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxAccessAuthServerEnabled 1.3.6.1.4.1.2636.3.51.1.0.4
An access authentication trap signifies that the AAA client has changed the status of the External authentication server to UP.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxAccessAuthAddressPoolHighThreshold 1.3.6.1.4.1.2636.3.51.1.0.5
An access authentication trap signifies that the address pool has reached its high threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxAccessAuthAddressPoolAbateThreshold 1.3.6.1.4.1.2636.3.51.1.0.6
An access authentication trap signifies that the address pool has reached its abate threshold
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxAccessAuthAddressPoolOutOfAddresses 1.3.6.1.4.1.2636.3.51.1.0.7
An access authentication trap signifies that an Out Of Addresses event occured on the pool.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxAccessAuthAddressPoolOutOfMemory 1.3.6.1.4.1.2636.3.51.1.0.8
An access authentication trap signifies that an Out Of Memory event occured on the pool.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxUserAAAAccessPoolGeneral 1.3.6.1.4.1.2636.3.51.1.1.4.1
OBJECT IDENTIFIER    

jnxUserAAAAccessPoolTable 1.3.6.1.4.1.2636.3.51.1.1.4.1.1
The entries in this table specify the address pools.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxUserAAAAccessPool

jnxUserAAAAccessPoolEntry 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1
A read-only description of the local address pools.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxUserAAAAccessPool  

jnxUserAAAAccessPoolIdent 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.1
The address identifier key.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

jnxUserAAAAccessPoolRoutingInstance 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.2
The routing instance of the address pool.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..63)  

jnxUserAAAAccessPoolName 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.3
The address pool name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..63)  

jnxUserAAAAccessPoolLinkName 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.4
The address pool link name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..63)  

jnxUserAAAAccessPoolFamilyType 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.5
The family type of this pool.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

jnxUserAAAAccessPoolInetNetwork 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.6
The Match criteria for this pool. Network or Prefix
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(2..48)  

jnxUserAAAAccessPoolInetPrefixLength 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.7
The Prefix Length for an IPv6 pool
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressPrefixLength  

jnxUserAAAAccessPoolOutOfMemory 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.8
The Number of times this pool has flagged an Out of Memory condition.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxUserAAAAccessPoolOutOfAddresses 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.9
The Number of times this pool has flagged an Out of Address condition.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxUserAAAAccessPoolAddressTotal 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.10
The total number of Addresses or prefixes in this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxUserAAAAccessPoolAddressesInUse 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.11
The total number of Addresses or prefixes given out from this pool.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxUserAAAAccessPoolAddressUsage 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.12
The percentage of addresses used in this pool or linked pool. If this pool is the head of a linked chain of pools, this number reflects the Usage for the whole chain. Conversely, if this pool it part of a linked chain of pools but not the head of the chain, the value will not be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

jnxUserAAAAccessPoolAddressUsageHigh 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.13
The configured high percentage threshold of addresses used in this pool or linked pool. An SNMP trap is generated when this threshold is exceeded. This trap will only be generated for unlinked pools or pools that are the head of a linked chain of pools Conversely, if this pool it part of a linked chain of pools but not the head of the chain, then no traps will be generated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

jnxUserAAAAccessPoolAddressUsageAbate 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.14
The configured abate percentage threshold of addresses used in this pool or linked pool. An SNMP trap clear is generated when address use falls below this threshold percentage. This trap will only be generated for unlinked pools or pools that are the head of a linked chain of pools Conversely, if this pool it part of a linked chain of pools but not the head of the chain, then no traps will be generated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

jnxUserAAAGeneral 1.3.6.1.4.1.2636.3.51.1.1.5.1
OBJECT IDENTIFIER    

jnxUserAAADomainDelimiters 1.3.6.1.4.1.2636.3.51.1.1.5.1.1
The list of delimiters used to separate the user's name from the user's domain in the username field. The default is '@'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

jnxUserAAADomainParseDirection 1.3.6.1.4.1.2636.3.51.1.1.5.1.2
The direction in which the user's name is parsed: either search for domain delimiter from left to right or right to left; first delimiter marks boundry. The default is right to left.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rightToLeft(1), leftToRight(2)  

jnxUserAAADomain 1.3.6.1.4.1.2636.3.51.1.1.5.2
OBJECT IDENTIFIER    

jnxUserAAADomainTable 1.3.6.1.4.1.2636.3.51.1.1.5.2.1
The entries in this table specify the assignment of a remote access user to a logical system, based on the user's domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxUserAAADomainEntry

jnxUserAAADomainEntry 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1
A specification of the logical system to which users on a specified domain should be assigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxUserAAADomainEntry  

jnxUserAAADomainName 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.1
The domain name uniquely identifying this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..63)  

jnxUserAAADomainStripDomain 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.2
Enables/disables the domain name stripping feature, which causes the system to strip the domain name before sending the access-request to RADIUS for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxUserAAADomainLogicalSystem 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.3
The name of the logical system, which will be used by the AAA subsystem for this session. If not specified, will be mapped to default.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainRoutingInstance 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.4
The name of the routing instance, which will be used by the AAA subsystem for this session. If not specified, will be mapped to default.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainAddrPoolName 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.5
The configured the address-pool-name for the domain name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

jnxUserAAADomainDynamicPorfile 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.6
The configured dynamic-profile which will be used for this session upon succeeding validation.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainTargetLogicalSystem 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.7
The configured target logical-system that this session will need to be mapped to. If not specified, will be mapped to default.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainTargetRoutingInstance 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.8
The configured routing-instance that this session will need to be mapped to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainTunnelProfile 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.9
The associated tunnel profile.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainDynamicProfile 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.10
The configured dynamic-profile to be used for this session.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainStripUsername 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.11
Displays the strip-username configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), leftToRight(1), rightToLeft(2)  

jnxUserAAADomainOverridePassword 1.3.6.1.4.1.2636.3.51.1.1.5.2.1.1.12
Displays the override-password configuration.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxUserAAADomainTunnelTable 1.3.6.1.4.1.2636.3.51.1.1.5.2.2
The entries in this table specify the tunnels associated with a domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxUserAAADomainTunnelEntry

jnxUserAAADomainTunnelEntry 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1
A specification of the tunnels associated with a domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxUserAAADomainTunnelEntry  

jnxUserAAADomainTunnelName 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.1
The domain name associated with this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..63)  

jnxUserAAADomainTunnelDefId 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.2
The tunnel definition id value associated with this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..31  

jnxUserAAADomainTunnelPreference 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.3
The tunnel's preference value associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..31  

jnxUserAAADomainTunnelRemoteGwName 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.4
This name specifies the hostname expected from the peer (the LNS) when a tunnel is setup.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainTunnelRemoteGwAddress 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.5
IP address of LNS tunnel endpoint
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

jnxUserAAADomainTunnelSourceGwName 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.6
This name specifies the hostname expected from the peer (the LNS) when a tunnel is setup.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainTunnelSourceGwAddress 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.7
The source address of the tunnel (overrides the default address for this LS/RI.)
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

jnxUserAAADomainTunnelSecret 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.8
The tunnel password associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

jnxUserAAADomainTunnelLogicalSystems 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.9
The logical systems associated with this entty.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainTunnelRoutingInstance 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.10
The routing instance associated with this entty.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

jnxUserAAADomainTunnelMedium 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.11
The tunnel medium associated with this entry. The medium dictates the format of the tunnel address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tunnelMediumIPv4(1), tunnelMediumUnknown(2)  

jnxUserAAADomainTunnelType 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.12
The tunnel type associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tunnelL2tp(1), tunnelUnknown(2), tunnelL2f(3)  

jnxUserAAADomainTunnelId 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.13
The tunnel identifier associated with this entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

jnxUserAAADomainTunnelMaxSessions 1.3.6.1.4.1.2636.3.51.1.1.5.2.2.1.14
The maximum number of tunnel sessions allowed in this tunnel entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

jnxUserAAADomainPadnTable 1.3.6.1.4.1.2636.3.51.1.1.5.2.3
The entries in this table specify the PPPoE active discovery network (PADN) parameters associated with a domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxUserAAADomainPadnEntry

jnxUserAAADomainPadnEntry 1.3.6.1.4.1.2636.3.51.1.1.5.2.3.1
A specification of the PPPoE active discovery network parameters associated with a domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxUserAAADomainPadnEntry  

jnxUserAAADomainPadnIpAddress 1.3.6.1.4.1.2636.3.51.1.1.5.2.3.1.1
The IP address of this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

jnxUserAAADomainPadnIpMask 1.3.6.1.4.1.2636.3.51.1.1.5.2.3.1.2
The IP mask of this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

jnxUserAAADomainPadnDistance 1.3.6.1.4.1.2636.3.51.1.1.5.2.3.1.3
The administrative distance metric of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

jnxUserAAAAccessProfileGeneral 1.3.6.1.4.1.2636.3.51.1.1.6.1
OBJECT IDENTIFIER    

jnxUserAAAAccessProfileTable 1.3.6.1.4.1.2636.3.51.1.1.6.1.1
The entries in this table specify the assignment of authentication methods for a particular subscriber type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxUserAAAAccessProfileEntry

jnxUserAAAAccessProfileEntry 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1
A specification of the authentication methods for a particular subscriber type.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxUserAAAAccessProfileEntry  

jnxUserAAAAccessProfileName 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.1
The access profile name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..63)  

jnxUserAAAAccessProfileAuthenticationOrder 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.2
The set of authentication mechanisms configured on this system. Each octet in this object contains one of the values defined in the JnxAuthenticateType TEXTUAL-CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding authentication protocol defined by JnxAuthenticateType. If an authentication protocol is configured and attempts to reach the authentication server fail, the system will move to the next octet in this object and retry the authentication in the form dictated by the corresponding authentication protocoltype. The process of sequencing thru each octet will stop if the authentication server is successfully contacted, or there are no more configured octets in this object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..5)  

jnxUserAAAAccessProfileAccountingOrder 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.3
The set of accounting mechanisms configured on this system. Each octet in this object contains one of the values defined in the JnxAccountingType TEXTUAL-CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding accounting protocol defined by JnxAccountingType. If an accounting protocol is configured and attempts to reach the accounting server fail, the system will move to the next octet in this object and retry the accounting in the form dictated by the corresponding accounting protocoltype. The process of sequencing thru each octet will stop if the accounting server is successfully contacted, or there are no more configured octets in this object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..5)  

jnxUserAAAAccessProfileAuthorizationOrder 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.4
The set of accounting mechanisms configured on this system. Each octet in this object contains one of the values defined in the JnxAuthorizationType TEXTUAL-CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding accounting protocol defined by JnxAuthorizationType. If an accounting protocol is configured and attempts to reach the accounting server fail, the system will move to the next octet in this object and retry the accounting in the form dictated by the corresponding accounting protocoltype. The process of sequencing thru each octet will stop if the accounting server is successfully contacted, or there are no more configured octets in this object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..5)  

jnxUserAAAAccessProfileProvisioningOrder 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.5
The set of provisioning mechanisms configured on this system. Each octet in this object contains one of the values defined in the JnxProvisioningType TEXTUAL-CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding accounting protocol defined by JnxProvisioningType. If an accounting protocol is configured and attempts to reach the accounting server fail, the system will move to the next octet in this object and retry the accounting in the form dictated by the corresponding accounting protocoltype. The process of sequencing thru each octet will stop if the accounting server is successfully contacted, or there are no more configured octets in this object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..5)  

jnxUserAAAAccessProfileAccStopOnFailure 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.6
Enables/disables the Acct-Stop message if a user fails authentication, but AAA-server grants access.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxUserAAAAccessProfileAccStopOnDeny 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.7
Enables/disables the Acct-Stop message if AAA-server denies access.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxUserAAAAccessProfileImmediateUpdate 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.8
Enables/disables the Acct-Update message on receipt of a Acct-response for the Acct-Start message.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxUserAAAAccessProfileCoaImmediateUpdate 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.9
Enables/disables the Acct-Update message on completion of processing a change of authorization.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxUserAAAAccessProfileInterval 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.10
The interval in minutes between accounting updates(Interim-stats off, if not specified).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxUserAAAAccessProfileStatType 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.11
The type of statistics are collected. These are the configured types: time - the option to report only uptime volume-time - the option to report both volume and uptime
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER time(0), volume-time(1)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor