JUNIPER-SONET-MIB

File: JUNIPER-SONET-MIB.mib (7501 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	JUNIPER-SMI
IF-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	TimeTicks
NOTIFICATION-TYPE	DateAndTime	TEXTUAL-CONVENTION
jnxMibs	jnxSonetNotifications	ifIndex
ifDescr

Defined Types

JnxSonetAlarmId
Identifies specific sonet/sdh alarms that may exist on an interface.
TEXTUAL-CONVENTION
	BITS	sonetLolAlarm(0), sonetPllAlarm(1), sonetLofAlarm(2), sonetLosAlarm(3), sonetSefAlarm(4), sonetLaisAlarm(5), sonetPaisAlarm(6), sonetLopAlarm(7), sonetBerrSdAlarm(8), sonetBerrSfAlarm(9), sonetLrdiAlarm(10), sonetPrdiAlarm(11), sonetReiAlarm(12), sonetUneqAlarm(13), sonetPmisAlarm(14), sonetLocAlarm(15), sonetVaisAlarm(16), sonetVlopAlarm(17), sonetVrdiAlarm(18), sonetVuneqAlarm(19), sonetVmisAlarm(20), sonetVlocAlarm(21), sdhLolAlarm(22), sdhPllAlarm(23), sdhLofAlarm(24), sdhLosAlarm(25), sdhOofAlarm(26), sdhMsAisAlarm(27), sdhHpAisAlarm(28), sdhLopAlarm(29), sdhBerrSdAlarm(30), sdhBerrSfAlarm(31), sdhMsFerfAlarm(32), sdhHpFerfAlarm(33), sdhMsFebeAlarm(34), sdhHpUneqAlarm(35), sdhHpMisAlarm(36), sdhLocAlarm(37)

JnxSonetAlarmEntry
SEQUENCE
	jnxSonetCurrentAlarms	JnxSonetAlarmId
	jnxSonetLastAlarmId	JnxSonetAlarmId
	jnxSonetLastAlarmTime	TimeTicks
	jnxSonetLastAlarmDate	DateAndTime
	jnxSonetLastAlarmEvent	INTEGER

Defined Values

jnxSonet		1.3.6.1.4.1.2636.3.20
This MIB module defines objects used for managing the sonet/sdh interfaces of Juniper products.
MODULE-IDENTITY

jnxSonetAlarms		1.3.6.1.4.1.2636.3.20.1
OBJECT IDENTIFIER

jnxSonetAlarmTable		1.3.6.1.4.1.2636.3.20.1.1
Information about alarms on all the sonet/sdh physical interfaces on this router.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxSonetAlarmEntry

jnxSonetAlarmEntry		1.3.6.1.4.1.2636.3.20.1.1.1
Information about alarms on a sonet/sdh physical interface on this router.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxSonetAlarmEntry

jnxSonetCurrentAlarms		1.3.6.1.4.1.2636.3.20.1.1.1.1
This object identifies all the active sonet/sdh alarms on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	JnxSonetAlarmId

jnxSonetLastAlarmId		1.3.6.1.4.1.2636.3.20.1.1.1.2
The object identifies the sonet/sdh alarm that most recently was set or cleared.
Status: current	Access: read-only
OBJECT-TYPE
	JnxSonetAlarmId

jnxSonetLastAlarmTime		1.3.6.1.4.1.2636.3.20.1.1.1.3
The value of sysUpTime when the management subsystem learned of the last alarm event.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

jnxSonetLastAlarmDate		1.3.6.1.4.1.2636.3.20.1.1.1.4
The system date and time when the management subsystem learned of the last alarm event.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

jnxSonetLastAlarmEvent		1.3.6.1.4.1.2636.3.20.1.1.1.5
This indicates whether the last alarm event set a new alarm or cleared an existing alarm.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), set(2), cleared(3)

jnxSonetNotificationPrefix		1.3.6.1.4.1.2636.4.6.0
OBJECT IDENTIFIER

jnxSonetAlarmSet		1.3.6.1.4.1.2636.4.6.0.1
Notification of a recently set sonet/sdh alarm.
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxSonetAlarmCleared		1.3.6.1.4.1.2636.4.6.0.2
Notification of a recently cleared sonet/sdh alarm.
Status: current	Access: read-only
NOTIFICATION-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor