JUNIPER-DOM-MIB

File: JUNIPER-DOM-MIB.mib (23711 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC JUNIPER-SMI
IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
NOTIFICATION-TYPE DateAndTime TEXTUAL-CONVENTION
jnxDomMibRoot jnxDomNotifications jnxDomLaneNotifications
ifIndex ifDescr

Defined Types

JnxDomAlarmId  
Identifies specific DOM alarms that may exist on an interface.
TEXTUAL-CONVENTION    
  BITS domRxLossSignalAlarm(0), domRxCDRLossLockAlarm(1), domRxNotReadyAlarm(2), domRxLaserPowerHighAlarm(3), domRxLaserPowerLowAlarm(4), domTxLaserBiasCurrentHighAlarm(5), domTxLaserBiasCurrentLowAlarm(6), domTxLaserOutputPowerHighAlarm(7), domTxLaserOutputPowerLowAlarm(8), domTxDataNotReadyAlarm(9), domTxNotReadyAlarm(10), domTxLaserFaultAlarm(11), domTxCDRLossLockAlarm(12), domModuleTemperatureHighAlarm(13), domModuleTemperatureLowAlarm(14), domModuleNotReadyAlarm(15), domModulePowerDownAlarm(16), domLinkDownAlarm(17), domModuleRemovedAlarm(18), domModuleVoltageHighAlarm(19), domModuleVoltageLowAlarm(20)  

JnxDomWarningId  
Identifies specific DOM warnings that may exist on an interface.
TEXTUAL-CONVENTION    
  BITS domRxLaserPowerHighWarning(0), domRxLaserPowerLowWarning(1), domTxLaserBiasCurrentHighWarning(2), domTxLaserBiasCurrentLowWarning(3), domTxLaserOutputPowerHighWarning(4), domTxLaserOutputPowerLowWarning(5), domModuleTemperatureHighWarning(6), domModuleTemperatureLowWarning(7), domModuleVoltageHighWarning(8), domModuleVoltageLowWarning(9)  

JnxDomLaneAlarmId  
Identifies specific DOM alarms that may exist on a Lane of a SFF interface
TEXTUAL-CONVENTION    
  BITS domLaneRxLaserPowerHighAlarm(0), domLaneRxLaserPowerLowAlarm(1), domLaneTxLaserBiasCurrentHighAlarm(2), domLaneTxLaserBiasCurrentLowAlarm(3), domLaneTxLaserOutputPowerHighAlarm(4), domLaneTxLaserOutputPowerLowAlarm(5), domLaneLaserTemperatureHighAlarm(6), domLaneLaserTemperatureLowAlarm(7)  

JnxDomLaneWarningId  
Identifies specific DOM warnings that may exist on a Lane of a SFF interface
TEXTUAL-CONVENTION    
  BITS domLaneRxLaserPowerHighWarning(0), domLaneRxLaserPowerLowWarning(1), domLaneTxLaserBiasCurrentHighWarning(2), domLaneTxLaserBiasCurrentLowWarning(3), domLaneTxLaserOutputPowerHighWarning(4), domLaneTxLaserOutputPowerLowWarning(5), domLaneLaserTemperatureHighWarning(6), domLaneLaserTemperatureLowWarning(7)  

JnxDomCurrentEntry  
SEQUENCE    
  jnxDomCurrentAlarms JnxDomAlarmId
  jnxDomCurrentAlarmDate DateAndTime
  jnxDomLastAlarms JnxDomAlarmId
  jnxDomCurrentWarnings JnxDomWarningId
  jnxDomCurrentRxLaserPower Integer32
  jnxDomCurrentTxLaserBiasCurrent Integer32
  jnxDomCurrentTxLaserOutputPower Integer32
  jnxDomCurrentModuleTemperature Integer32
  jnxDomCurrentRxLaserPowerHighAlarmThreshold Integer32
  jnxDomCurrentRxLaserPowerLowAlarmThreshold Integer32
  jnxDomCurrentRxLaserPowerHighWarningThreshold Integer32
  jnxDomCurrentRxLaserPowerLowWarningThreshold Integer32
  jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold Integer32
  jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold Integer32
  jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold Integer32
  jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold Integer32
  jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold Integer32
  jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold Integer32
  jnxDomCurrentTxLaserOutputPowerHighWarningThreshold Integer32
  jnxDomCurrentTxLaserOutputPowerLowWarningThreshold Integer32
  jnxDomCurrentModuleTemperatureHighAlarmThreshold Integer32
  jnxDomCurrentModuleTemperatureLowAlarmThreshold Integer32
  jnxDomCurrentModuleTemperatureHighWarningThreshold Integer32
  jnxDomCurrentModuleTemperatureLowWarningThreshold Integer32
  jnxDomCurrentModuleVoltage Integer32
  jnxDomCurrentModuleVoltageHighAlarmThreshold Integer32
  jnxDomCurrentModuleVoltageLowAlarmThreshold Integer32
  jnxDomCurrentModuleVoltageHighWarningThreshold Integer32
  jnxDomCurrentModuleVoltageLowWarningThreshold Integer32
  jnxDomCurrentModuleLaneCount Integer32

JnxDomCurrentLaneEntry  
SEQUENCE    
  jnxDomLaneIndex Integer32
  jnxDomCurrentLaneAlarms JnxDomLaneAlarmId
  jnxDomCurrentLaneAlarmDate DateAndTime
  jnxDomLaneLastAlarms JnxDomLaneAlarmId
  jnxDomCurrentLaneWarnings JnxDomLaneWarningId
  jnxDomCurrentLaneRxLaserPower Integer32
  jnxDomCurrentLaneTxLaserBiasCurrent Integer32
  jnxDomCurrentLaneTxLaserOutputPower Integer32
  jnxDomCurrentLaneLaserTemperature Integer32

Defined Values

jnxDomMib 1.3.6.1.4.1.2636.3.60.1
This MIB module defines objects used for Digital Optical Monitor on interface of Juniper products.
MODULE-IDENTITY    

jnxDomDigitalMonitoring 1.3.6.1.4.1.2636.3.60.1.1
OBJECT IDENTIFIER    

jnxDomCurrentTable 1.3.6.1.4.1.2636.3.60.1.1.1
Information about Digital Optical Monitoring for this interfaces on this router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxDomCurrentEntry

jnxDomCurrentEntry 1.3.6.1.4.1.2636.3.60.1.1.1.1
Information about Digital Optical Monitoring for this interfaces on this router.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxDomCurrentEntry  

jnxDomCurrentAlarms 1.3.6.1.4.1.2636.3.60.1.1.1.1.1
This object identifies all the active DOM alarms on a SFF physical interface on this router.
Status: current Access: read-only
OBJECT-TYPE    
  JnxDomAlarmId  

jnxDomCurrentAlarmDate 1.3.6.1.4.1.2636.3.60.1.1.1.1.2
The system date and time when the management subsystem learned of the current alarm event.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

jnxDomLastAlarms 1.3.6.1.4.1.2636.3.60.1.1.1.1.3
This object identifies a copy of jnxDomCurrentAlarms before last set or clear.
Status: current Access: read-only
OBJECT-TYPE    
  JnxDomAlarmId  

jnxDomCurrentWarnings 1.3.6.1.4.1.2636.3.60.1.1.1.1.4
This object identifies all the active DOM warnings on a SFF physical interface on this router.
Status: current Access: read-only
OBJECT-TYPE    
  JnxDomWarningId  

jnxDomCurrentRxLaserPower 1.3.6.1.4.1.2636.3.60.1.1.1.1.5
Receiver laser power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.60.1.1.1.1.6
Transmitter laser bias current.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserOutputPower 1.3.6.1.4.1.2636.3.60.1.1.1.1.7
Transmitter laser output power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleTemperature 1.3.6.1.4.1.2636.3.60.1.1.1.1.8
Module temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentRxLaserPowerHighAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.9
Receiver laser power high alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentRxLaserPowerLowAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.10
Receiver laser power low alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentRxLaserPowerHighWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.11
Receiver laser power high warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentRxLaserPowerLowWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.12
Receiver laser power low warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.13
Transmitter laser bias current high alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.14
Transmitter laser bias current low alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.15
Transmitter laser bias current high warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.16
Transmitter laser bias current low warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.17
Transmitter laser power high alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.18
Transmitter laser power low alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserOutputPowerHighWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.19
Transmitter laser power high warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentTxLaserOutputPowerLowWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.20
Transmitter laser power low warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleTemperatureHighAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.21
Module temperature high alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleTemperatureLowAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.22
Module temperature low alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleTemperatureHighWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.23
Module temperature high warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleTemperatureLowWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.24
Module temperature low warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleVoltage 1.3.6.1.4.1.2636.3.60.1.1.1.1.25
Module voltage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleVoltageHighAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.26
Module voltage high alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleVoltageLowAlarmThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.27
Module voltage low alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleVoltageHighWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.28
Module voltage high warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleVoltageLowWarningThreshold 1.3.6.1.4.1.2636.3.60.1.1.1.1.29
Module voltage low warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentModuleLaneCount 1.3.6.1.4.1.2636.3.60.1.1.1.1.30
Number of Lanes (Lasers) in this module
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomDigitalLaneMonitoring 1.3.6.1.4.1.2636.3.60.1.2
OBJECT IDENTIFIER    

jnxDomModuleLaneTable 1.3.6.1.4.1.2636.3.60.1.2.1
Table of information for this lane (Laser) of this SFF optical module.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxDomCurrentLaneEntry

jnxDomCurrentLaneEntry 1.3.6.1.4.1.2636.3.60.1.2.1.1
Information about Digital Optical Monitoring for this lane of this SFF optical Module
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxDomCurrentLaneEntry  

jnxDomLaneIndex 1.3.6.1.4.1.2636.3.60.1.2.1.1.1
A lane (Laser) on this SFF optical interface
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1000  

jnxDomCurrentLaneAlarms 1.3.6.1.4.1.2636.3.60.1.2.1.1.2
This object identifies all the active DOM alarms on a particular Lane of a SFF physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  JnxDomLaneAlarmId  

jnxDomCurrentLaneAlarmDate 1.3.6.1.4.1.2636.3.60.1.2.1.1.3
The system date and time when the management subsystem learned of the current lane alarm event.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

jnxDomLaneLastAlarms 1.3.6.1.4.1.2636.3.60.1.2.1.1.4
This object identifies a copy of jnxDomCurrentAlarms before last set or clear.
Status: current Access: read-only
OBJECT-TYPE    
  JnxDomLaneAlarmId  

jnxDomCurrentLaneWarnings 1.3.6.1.4.1.2636.3.60.1.2.1.1.5
This object identifies all the active DOM warnings on a particular Lane of a SFF physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  JnxDomLaneWarningId  

jnxDomCurrentLaneRxLaserPower 1.3.6.1.4.1.2636.3.60.1.2.1.1.6
Receiver laser power on a particular Lane of a SFF physcial interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentLaneTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.60.1.2.1.1.7
Transmitter laser bias on a particular Lane of a SFF physcial interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentLaneTxLaserOutputPower 1.3.6.1.4.1.2636.3.60.1.2.1.1.8
Transmitter laser power on a particular Lane of a SFF physcial interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomCurrentLaneLaserTemperature 1.3.6.1.4.1.2636.3.60.1.2.1.1.9
Temperature of laser on a particular Lane of a SFF physcial interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxDomNotificationPrefix 1.3.6.1.4.1.2636.4.18.0
OBJECT IDENTIFIER    

jnxDomAlarmSet 1.3.6.1.4.1.2636.4.18.0.1
Notification of a recently set Dom alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxDomAlarmCleared 1.3.6.1.4.1.2636.4.18.0.2
Notification of a recently cleared Dom alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxDomLaneNotificationPrefix 1.3.6.1.4.1.2636.4.25.0
OBJECT IDENTIFIER    

jnxDomLaneAlarmSet 1.3.6.1.4.1.2636.4.25.0.1
Notification of a recently set Dom Lane alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxDomLaneAlarmCleared 1.3.6.1.4.1.2636.4.25.0.2
Notification of a recently cleared Dom Lane alarm.
Status: current Access: read-only
NOTIFICATION-TYPE