InternetThruway-MIB

File: InternetThruway-MIB.mib (149084 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

Counter enterprises DisplayString
OBJECT-TYPE TRAP-TYPE IpAddress
Gauge

Defined Types

TimeString  
DisplayString    

PartitionSpaceStatus  
INTEGER spaceAlarmOff(1), spaceAlarmOn(2)    

PartitionTableEntry  
SEQUENCE    
  partitionIndex INTEGER
  partitionName DisplayString
  partitionPercentFull INTEGER
  partitionMegsFree INTEGER
  partitionSpaceStatus PartitionSpaceStatus
  partitionSpaceKey INTEGER
  partitionSpaceTimeStamp TimeString

ComponentIndex  
INTEGER oolsproxy(1), climan(2), arm(3), sem(4), hgm(5), survman(6), ss7scm(7), ss7opm(8), ss7cheni(9)    

ComponentSysmanState  
INTEGER inProvisionedState(1), notInProvisionedState(2), unknown(3)    

ComponentTableEntry  
SEQUENCE    
  componentIndex ComponentIndex
  componentName DisplayString
  compSecsInCurrentState INTEGER
  compProvStateStatus ComponentSysmanState
  compProvStateKey INTEGER
  compProvStateTimeStamp TimeString
  compDebugStatus INTEGER
  compDebugKey INTEGER
  compDebugTimeStamp TimeString
  compRestartStatus INTEGER
  compRestartKey INTEGER
  compRestartTimeStamp TimeString

LinksetState  
INTEGER available(1), unAvailable(2)    

LinksetTableEntry  
SEQUENCE    
  linksetIndex INTEGER
  linksetId INTEGER
  linksetAdjPointcode INTEGER
  linksetState LinksetState

LinkState  
INTEGER available(1), unAvailable(2)    

LinkInhibitionState  
INTEGER unInhibited(1), localInhibited(2), remoteInhibited(3), localRemoteInhibited(4)    

LinkCongestionState  
INTEGER notCongested(1), congested(2)    

LinkAlignmentState  
INTEGER aligned(1), notAligned(2)    

LinkTableEntry  
SEQUENCE    
  linkIndex INTEGER
  linkId INTEGER
  linkHostname DisplayString
  linkCardDeviceName DisplayString
  linkState LinkState
  linkInhibitionState LinkInhibitionState
  linkCongestionState LinkCongestionState
  linkAlignmentState LinkAlignmentState
  linkNumMSUReceived INTEGER
  linkNumMSUDiscarded INTEGER
  linkNumMSUTransmitted INTEGER
  linkNumSIFReceived INTEGER
  linkNumSIFTransmitted INTEGER
  linkNumAutoChangeovers INTEGER
  linkNumUnexpectedMsgs INTEGER

RouteState  
INTEGER accessible(1), inaccessible(2), restricted(3)    

RouteTableEntry  
SEQUENCE    
  routeIndex INTEGER
  routeId DisplayString
  routeDestPointCode DisplayString
  routeState RouteState
  routeRank INTEGER
  routeLinksetId DisplayString

DestinationState  
INTEGER accessible(1), inaccessible(2), restricted(3)    

DestinationTableEntry  
SEQUENCE    
  destIndex INTEGER
  destPointCode DisplayString
  destState DestinationState
  destRuleId INTEGER

UpgradeInProgress  
INTEGER 0..2    

HgAlarmTableEntry  
SEQUENCE    
  hgIndex INTEGER
  hgName DisplayString
  hgKey INTEGER
  hgAlarmTimeStamp TimeString
  hgIPAddress IpAddress

NasAlarmTableEntry  
SEQUENCE    
  nasIndex INTEGER
  nasName DisplayString
  nasKey INTEGER
  nasAlarmTimeStamp TimeString
  nasIPAddress IpAddress
  nasCmplxName DisplayString

SS7LinkFailureAlarmTableEntry  
SEQUENCE    
  lfIndex INTEGER
  lfKey INTEGER
  lfIPAddress IpAddress
  lfLinkCode INTEGER
  lfTimeStamp TimeString
  lfName DisplayString
  lfCardId DisplayString
  lfLinkSet DisplayString

SS7LinkCongestionAlarmTableEntry  
SEQUENCE    
  lcIndex INTEGER
  lcKey INTEGER
  lcIPAddress IpAddress
  lcLinkCode INTEGER
  lcTimeStamp TimeString
  lcName DisplayString
  lcCardId DisplayString
  lcLinkSet DisplayString

SS7ISUPFailureAlarmTableEntry  
SEQUENCE    
  ifIndex INTEGER
  ifKey INTEGER
  ifIPAddress IpAddress
  ifTimeStamp TimeString
  ifName DisplayString

SS7ISUPCongestionAlarmTableEntry  
SEQUENCE    
  icIndex INTEGER
  icKey INTEGER
  icIPAddress IpAddress
  icCongestionLevel INTEGER
  icTimeStamp TimeString
  icName DisplayString

SS7MTP3CongestionAlarmTableEntry  
SEQUENCE    
  mtp3Index INTEGER
  mtp3Key INTEGER
  mtp3IPAddress IpAddress
  mtp3CongestionLevel INTEGER
  mtp3TimeStamp TimeString
  mtp3Name DisplayString

MTP2AlarmConditionType  
INTEGER fasError(1), carrierLost(2), synchroLost(3), aisRcv(4), remoteAlarmRcv(5), tooHighBer(6)    

SS7MTP2TrunkFailureAlarmTableEntry  
SEQUENCE    
  mtp2Index INTEGER
  mtp2Key INTEGER
  mtp2IPAddress IpAddress
  mtp2Name DisplayString
  mtp2CardId DisplayString
  mtp2AlarmCondition MTP2AlarmConditionType
  mtp2TimeStamp TimeString

SS7LinksetFailureAlarmTableEntry  
SEQUENCE    
  lsFailureIndex INTEGER
  lsFailureKey INTEGER
  lsFailureIPAddress IpAddress
  lsFailureName DisplayString
  lsFailurePointcode DisplayString
  lsFailureTimeStamp TimeString

SS7DestinationInaccessibleAlarmTableEntry  
SEQUENCE    
  destInaccessIndex INTEGER
  destInaccessKey INTEGER
  destInaccessIPAddress IpAddress
  destInaccessName DisplayString
  destInaccessPointcode DisplayString
  destInaccessTimeStamp TimeString

SS7DestinationCongestedAlarmTableEntry  
SEQUENCE    
  destCongestIndex INTEGER
  destCongestKey INTEGER
  destCongestIPAddress IpAddress
  destCongestName DisplayString
  destCongestPointcode DisplayString
  destCongestCongestionLevel INTEGER
  destCongestTimeStamp TimeString

SS7LinkAlignmentAlarmTableEntry  
SEQUENCE    
  linkAlignIndex INTEGER
  linkAlignKey INTEGER
  linkAlignIPAddress IpAddress
  linkAlignName DisplayString
  linkAlignLinkCode INTEGER
  linkAlignTimeStamp TimeString
  linkAlignCardId DisplayString
  linkAlignLinkSet DisplayString

LostServerAlarmTableEntry  
SEQUENCE    
  lsIndex INTEGER
  lsKey INTEGER
  lsIPAddress IpAddress
  lsName DisplayString
  lsTimeStamp TimeString

LinkOMTableEntry  
SEQUENCE    
  linkOMId INTEGER
  linkOMSetId INTEGER
  linkFailures Counter
  linkCongestions Counter
  linkInhibits Counter
  linkTransmittedMSUs Counter
  linkReceivedMSUs Counter
  linkRemoteProcOutages Counter

TrunkCallOMTableEntry  
SEQUENCE    
  trunkCallOMIndex INTEGER
  trunkGroupCLLI DisplayString
  numberOfCircuits INTEGER
  trunkOutCallAttempts Counter
  trunkOutCallNormalCompletions Counter
  trunkOutCallAbnormalCompletions Counter
  trunkUserBusyOutCallRejects Counter
  trunkTempFailOutCallRejects Counter
  trunkUserUnavailableOutCallRejects Counter
  trunkAbnormalReleaseOutCallRejects Counter
  trunkOtherOutCallRejects Counter
  trunkCumulativeActiveOutCalls Counter
  trunkCurrentlyActiveOutCalls Counter
  trunkCurrentlyActiveDigitalOutCalls Counter
  trunkCurrentlyActiveAnalogOutCalls Counter
  trunkInCallAttempts Counter
  trunkInCallNormalCompletions Counter
  trunkInCallAbnormalCompletions Counter
  trunkUserBusyInCallRejects Counter
  trunkTempFailInCallRejects Counter
  trunkUserUnavailableInCallRejects Counter
  trunkAbnormalReleaseInCallRejects Counter
  trunkOtherInCallRejects Counter
  trunkCumulativeActiveInCalls Counter
  trunkCurrentlyActiveInCalls Counter
  trunkCurrentlyActiveDigitalInCalls Counter
  trunkCurrentlyActiveAnalogInCalls Counter
  trunkAllActiveCalls Counter
  trunkOccupancyPerCCS INTEGER
  trafficInCCSs Counter
  trafficInCCSIncomings Counter
  localBusyInCCSs Counter
  remoteBusyInCCSs Counter

NasCallOMTableEntry  
SEQUENCE    
  nasCallOMIndex INTEGER
  nasName1 DisplayString
  numberOfPorts INTEGER
  nasOutCallAttempts Counter
  nasOutCallNormalCompletions Counter
  nasOutCallAbnormalCompletions Counter
  nasUserBusyOutCallRejects Counter
  nasTempFailOutCallRejects Counter
  nasUserUnavailableOutCallRejects Counter
  nasAbnormalReleaseOutCallRejects Counter
  nasOtherOutCallRejects Counter
  nasCumulativeActiveOutCalls Counter
  nasCurrentlyActiveOutCalls Counter
  nasCurrentlyActiveDigitalOutCalls Counter
  nasCurrentlyActiveAnalogOutCalls Counter
  nasInCallAttempts Counter
  nasInCallNormalCompletions Counter
  nasInCallAbnormalCompletions Counter
  nasUserBusyInCallRejects Counter
  nasTempFailInCallRejects Counter
  nasUserUnavailableInCallRejects Counter
  nasAbnormalReleaseInCallRejects Counter
  nasOtherInCallRejects Counter
  nasCumulativeActiveInCalls Counter
  nasCurrentlyActiveInCalls Counter
  nasCurrentlyActiveDigitalInCalls Counter
  nasCurrentlyActiveAnalogInCalls Counter
  nasAllActiveCalls Counter
  nasMaxPortsUsed INTEGER
  nasMinPortsUsed INTEGER
  nasCurrentlyInUsePorts INTEGER

PhoneCallOMTableEntry  
SEQUENCE    
  phoneCallOMIndex INTEGER
  phoneNumber DisplayString
  phoneDialCallAttempts Counter
  phoneDialCallNormalCompletions Counter
  phoneDialCallAbnormalCompletions Counter
  phoneUserBusyDialCallRejects Counter
  phoneTempFailDialCallRejects Counter
  phoneUserUnavailableDialCallRejects Counter
  phoneAbnormalReleaseDialCallRejects Counter
  phoneOtherDialCallRejects Counter
  phoneCumulativeActiveDialCalls Counter
  phoneCurrentlyActiveDialCalls Counter
  phoneCurrentlyActiveDigitalDialCalls Counter
  phoneCurrentlyActiveAnalogDialCalls Counter

Defined Values

nortel 1.3.6.1.4.1.562
OBJECT IDENTIFIER    

dialaccess 1.3.6.1.4.1.562.14
OBJECT IDENTIFIER    

csg 1.3.6.1.4.1.562.14.2
OBJECT IDENTIFIER    

system 1.3.6.1.4.1.562.14.2.1
OBJECT IDENTIFIER    

components 1.3.6.1.4.1.562.14.2.2
OBJECT IDENTIFIER    

traps 1.3.6.1.4.1.562.14.2.3
OBJECT IDENTIFIER    

alarms 1.3.6.1.4.1.562.14.2.4
OBJECT IDENTIFIER    

ncServer 1.3.6.1.4.1.562.14.2.5
OBJECT IDENTIFIER    

ss7 1.3.6.1.4.1.562.14.2.6
OBJECT IDENTIFIER    

omData 1.3.6.1.4.1.562.14.2.7
OBJECT IDENTIFIER    

disk 1.3.6.1.4.1.562.14.2.1.1
OBJECT IDENTIFIER    

linkOMs 1.3.6.1.4.1.562.14.2.7.1
OBJECT IDENTIFIER    

maintenanceOMs 1.3.6.1.4.1.562.14.2.7.2
OBJECT IDENTIFIER    

callOMs 1.3.6.1.4.1.562.14.2.7.3
OBJECT IDENTIFIER    

trunkGroupOMs 1.3.6.1.4.1.562.14.2.7.4
OBJECT IDENTIFIER    

phoneNumberOMs 1.3.6.1.4.1.562.14.2.7.5
OBJECT IDENTIFIER    

systemOMs 1.3.6.1.4.1.562.14.2.7.6
OBJECT IDENTIFIER    

nasOMs 1.3.6.1.4.1.562.14.2.7.7
OBJECT IDENTIFIER    

partitionTable 1.3.6.1.4.1.562.14.2.1.1.1
The PartitionTable contains information about each disk partition on the CSG
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PartitionTableEntry

partitionTableEntry 1.3.6.1.4.1.562.14.2.1.1.1.1
An entry in the PartitionTable. Indexed by partitionIndex
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PartitionTableEntry  

partitionIndex 1.3.6.1.4.1.562.14.2.1.1.1.1.1
Identifies partition number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

partitionName 1.3.6.1.4.1.562.14.2.1.1.1.1.2
Identifies partition name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

partitionPercentFull 1.3.6.1.4.1.562.14.2.1.1.1.1.3
Indicates (in Percent) how full the disk is.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

partitionMegsFree 1.3.6.1.4.1.562.14.2.1.1.1.1.4
Indicates how many Megabytes are free on the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionSpaceStatus 1.3.6.1.4.1.562.14.2.1.1.1.1.5
Indicates if there is currently a space alarm in progress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PartitionSpaceStatus  

partitionSpaceKey 1.3.6.1.4.1.562.14.2.1.1.1.1.6
Unique indicator for the partition space alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionSpaceTimeStamp 1.3.6.1.4.1.562.14.2.1.1.1.1.7
Indicates the time of the last partitionSpaceStatus transition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

componentTable 1.3.6.1.4.1.562.14.2.2.10
The ComponentTable contains information about all the Components that should be running on the CSG.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ComponentTableEntry

componentTableEntry 1.3.6.1.4.1.562.14.2.2.10.1
An entry in the ComponentTable. componentTable entries are indexed by componentIndex, which is an integer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ComponentTableEntry  

componentIndex 1.3.6.1.4.1.562.14.2.2.10.1.1
Identifies the component entry with an enumerated list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ComponentIndex  

componentName 1.3.6.1.4.1.562.14.2.2.10.1.2
Identifies component name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

compSecsInCurrentState 1.3.6.1.4.1.562.14.2.2.10.1.3
Indicates how many seconds a component has been running in its current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

compProvStateStatus 1.3.6.1.4.1.562.14.2.2.10.1.4
Indicates the current state of the particular CSG component. The states are one of the following: inProvisionedState(1), notInProvisionedState(2), unknown(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  ComponentSysmanState  

compProvStateKey 1.3.6.1.4.1.562.14.2.2.10.1.5
Unique indicator for the prov state alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

compProvStateTimeStamp 1.3.6.1.4.1.562.14.2.2.10.1.6
Indicates the time of the last state transition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

compDebugStatus 1.3.6.1.4.1.562.14.2.2.10.1.7
Shows if the component is running with debug on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

compDebugKey 1.3.6.1.4.1.562.14.2.2.10.1.8
Unique indicator for the debug state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

compDebugTimeStamp 1.3.6.1.4.1.562.14.2.2.10.1.9
Indicates the time of the last debug transition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

compRestartStatus 1.3.6.1.4.1.562.14.2.2.10.1.10
Shows if the component has had multiple restarts recently.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

compRestartKey 1.3.6.1.4.1.562.14.2.2.10.1.11
Unique indicator for the multi-restart of components.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

compRestartTimeStamp 1.3.6.1.4.1.562.14.2.2.10.1.12
Indicates the time of the last restart flagging.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

linksetTable 1.3.6.1.4.1.562.14.2.6.1
The linksetTable contains information about all the linksets on the CSG.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LinksetTableEntry

linksetTableEntry 1.3.6.1.4.1.562.14.2.6.1.1
An entry in the linksetTable. Entries in the linkset table are indexed by linksetIndex, which is an integer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LinksetTableEntry  

linksetIndex 1.3.6.1.4.1.562.14.2.6.1.1.1
Identifies the n'th position in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

linksetId 1.3.6.1.4.1.562.14.2.6.1.1.2
The id of the linkset to be used as index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linksetAdjPointcode 1.3.6.1.4.1.562.14.2.6.1.1.3
The adjacent pointcode of the linkset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linksetState 1.3.6.1.4.1.562.14.2.6.1.1.4
The state of the linkset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  LinksetState  

linkTable 1.3.6.1.4.1.562.14.2.6.2
The linkTable contains information about the links in a given linkset on the CSG.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LinkTableEntry

linkTableEntry 1.3.6.1.4.1.562.14.2.6.2.1
An entry in the linkTable. Entries in the link table table are indexed by linksetIndex and linkIndex, which are both integers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LinkTableEntry  

linkIndex 1.3.6.1.4.1.562.14.2.6.2.1.1
Identifies the n'th position in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

linkId 1.3.6.1.4.1.562.14.2.6.2.1.2
The id of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkHostname 1.3.6.1.4.1.562.14.2.6.2.1.3
The hostname of the CSG to which this link is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

linkCardDeviceName 1.3.6.1.4.1.562.14.2.6.2.1.4
The device name of the card upon which this link is hosted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

linkState 1.3.6.1.4.1.562.14.2.6.2.1.5
The state of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  LinkState  

linkInhibitionState 1.3.6.1.4.1.562.14.2.6.2.1.6
The inhibition status of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  LinkInhibitionState  

linkCongestionState 1.3.6.1.4.1.562.14.2.6.2.1.7
The congestion status of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  LinkCongestionState  

linkAlignmentState 1.3.6.1.4.1.562.14.2.6.2.1.8
The alignment status of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  LinkAlignmentState  

linkNumMSUReceived 1.3.6.1.4.1.562.14.2.6.2.1.9
This object supplies the number of MSU's received by the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkNumMSUDiscarded 1.3.6.1.4.1.562.14.2.6.2.1.10
This object supplies the number of received MSU's discarded by the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkNumMSUTransmitted 1.3.6.1.4.1.562.14.2.6.2.1.11
This object supplies the number of MSU's transmitted by the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkNumSIFReceived 1.3.6.1.4.1.562.14.2.6.2.1.12
This object supplies the number of SIF and SIO octets received by the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkNumSIFTransmitted 1.3.6.1.4.1.562.14.2.6.2.1.13
This object supplies the number of SIF and SIO octects transmitted by the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkNumAutoChangeovers 1.3.6.1.4.1.562.14.2.6.2.1.14
This object supplies the number of automatic changeovers undergone by the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkNumUnexpectedMsgs 1.3.6.1.4.1.562.14.2.6.2.1.15
This object supplies the number of unexpected messages received by the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

routeTable 1.3.6.1.4.1.562.14.2.6.3
The routeTable contains information about the routes provisioned in the CSG complex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RouteTableEntry

routeTableEntry 1.3.6.1.4.1.562.14.2.6.3.1
An entry in the routeTable. Entries in the route table are indexed by routeIndex, which is an integer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RouteTableEntry  

routeIndex 1.3.6.1.4.1.562.14.2.6.3.1.1
Identifies the n'th position in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

routeId 1.3.6.1.4.1.562.14.2.6.3.1.2
The unique identifier of the route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

routeDestPointCode 1.3.6.1.4.1.562.14.2.6.3.1.3
The destination point code associated with this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

routeState 1.3.6.1.4.1.562.14.2.6.3.1.4
The current state of the route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouteState  

routeRank 1.3.6.1.4.1.562.14.2.6.3.1.5
Rank assigned to this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

routeLinksetId 1.3.6.1.4.1.562.14.2.6.3.1.6
The linkset associated with this route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

destinationTable 1.3.6.1.4.1.562.14.2.6.4
The destinationTable contains information about the destinations provisioned in the CSG complex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DestinationTableEntry

destinationTableEntry 1.3.6.1.4.1.562.14.2.6.4.1
An entry in the destinationTable. Entries in the destination table are indexed by destIndex, which is an integer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DestinationTableEntry  

destIndex 1.3.6.1.4.1.562.14.2.6.4.1.1
Identifies the n'th position in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

destPointCode 1.3.6.1.4.1.562.14.2.6.4.1.2
The destination point code of this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

destState 1.3.6.1.4.1.562.14.2.6.4.1.3
The current state of the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DestinationState  

destRuleId 1.3.6.1.4.1.562.14.2.6.4.1.4
Rule Identifier (for the routing table to be used) for this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ncServerId 1.3.6.1.4.1.562.14.2.5.2
The ServerId attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ncServerName 1.3.6.1.4.1.562.14.2.5.3
The ServerName attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ncHostName 1.3.6.1.4.1.562.14.2.5.4
The HostName attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ncEthernetName 1.3.6.1.4.1.562.14.2.5.5
The EthernetName attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ncEthernetIP 1.3.6.1.4.1.562.14.2.5.6
The EthernetIP attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ncClusterName 1.3.6.1.4.1.562.14.2.5.7
The ClusterName attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ncClusterIP 1.3.6.1.4.1.562.14.2.5.8
The ClusterIP attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ncOperationalState 1.3.6.1.4.1.562.14.2.5.9
The OperationalState of the node. Possible values are: UNKNOWN, ENABLED, ENABLED_NETDSC, ENABLED_NETPAR, DISABLED
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ncStandbyState 1.3.6.1.4.1.562.14.2.5.10
The StandbyState attribute value of the node. Possible values are: UNKNOWN, HOT_STANDBY, COLD_STANDBY, WARM_STANDBY, PROVIDING_SERVICE
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ncAvailabilityState 1.3.6.1.4.1.562.14.2.5.11
The AvailabilityState attribute value of the node. Possible values are: UNKNOWN, AVAILABLE, DEGRADED, OFFLINE
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ncSoftwareVersion 1.3.6.1.4.1.562.14.2.5.12
The SoftwareVersion attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ncUpgradeInProgress 1.3.6.1.4.1.562.14.2.5.13
The UpgradeInProgress attribute value of the node. Possible values are: 0 = UNKNOWN, 1 = ACTIVE, 2 = INACTIVE
Status: mandatory Access: read-only
OBJECT-TYPE    
  UpgradeInProgress  

hgAlarmTable 1.3.6.1.4.1.562.14.2.4.10
The HgAlarmTable contains information about all the current HG alarms
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgAlarmTableEntry

hgAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.10.1
An entry in the HgAlarmTable. HgAlarmTable entries are indexed by componentIndex, which is an integer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HgAlarmTableEntry  

hgIndex 1.3.6.1.4.1.562.14.2.4.10.1.1
Identifies the n'th position in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

hgName 1.3.6.1.4.1.562.14.2.4.10.1.2
The Home gateway to be used as index
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hgKey 1.3.6.1.4.1.562.14.2.4.10.1.3
Unique identifier for the HgFailure alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hgAlarmTimeStamp 1.3.6.1.4.1.562.14.2.4.10.1.4
Indicates the time of the HG Alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

hgIPAddress 1.3.6.1.4.1.562.14.2.4.10.1.5
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

nasAlarmTable 1.3.6.1.4.1.562.14.2.4.11
The NasAlarmTable contains information about all the current NAS alarms
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NasAlarmTableEntry

nasAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.11.1
An entry in the NasAlarmTable. NasAlarmTable entries are indexed by nasIndex, which is an integer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NasAlarmTableEntry  

nasIndex 1.3.6.1.4.1.562.14.2.4.11.1.1
Identifies the n'th position in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

nasName 1.3.6.1.4.1.562.14.2.4.11.1.2
The NAS Name
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nasKey 1.3.6.1.4.1.562.14.2.4.11.1.3
Unique identifier for the NAS Failure alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nasAlarmTimeStamp 1.3.6.1.4.1.562.14.2.4.11.1.4
Indicates the time of the NAS Alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

nasIPAddress 1.3.6.1.4.1.562.14.2.4.11.1.5
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

nasCmplxName 1.3.6.1.4.1.562.14.2.4.11.1.6
The complex which this alarm is raised against.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ss7LinkFailureAlarmTable 1.3.6.1.4.1.562.14.2.4.12
The SS7LinkFailureAlarmTable contains alarms for SS7 link failures.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7LinkFailureAlarmTableEntry

ss7LinkFailureAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.12.1
This object defines a row within the SS7 Link Failure Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7LinkFailureAlarmTableEntry  

lfIndex 1.3.6.1.4.1.562.14.2.4.12.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

lfKey 1.3.6.1.4.1.562.14.2.4.12.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lfIPAddress 1.3.6.1.4.1.562.14.2.4.12.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

lfLinkCode 1.3.6.1.4.1.562.14.2.4.12.1.5
This object identifies the signalling link code (SLC) of the failed link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lfTimeStamp 1.3.6.1.4.1.562.14.2.4.12.1.6
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

lfName 1.3.6.1.4.1.562.14.2.4.12.1.7
Indicates the configured name for the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lfCardId 1.3.6.1.4.1.562.14.2.4.12.1.8
This object identifies the device that hosts the failed link. It provides a physical description of the device, as well as its slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lfLinkSet 1.3.6.1.4.1.562.14.2.4.12.1.9
This object identifies the linkset associated with the link via its adjacent point code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ss7LinkCongestionAlarmTable 1.3.6.1.4.1.562.14.2.4.13
The SS7LinkCongestionAlarmTable contains alarms to indicate congestion on an SS7 link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7LinkCongestionAlarmTableEntry

ss7LinkCongestionAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.13.1
This object defines a row within the SS7 Link Congestion Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7LinkCongestionAlarmTableEntry  

lcIndex 1.3.6.1.4.1.562.14.2.4.13.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

lcKey 1.3.6.1.4.1.562.14.2.4.13.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lcIPAddress 1.3.6.1.4.1.562.14.2.4.13.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

lcLinkCode 1.3.6.1.4.1.562.14.2.4.13.1.4
This object identifies the signalling link code (SLC) of the affected link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lcTimeStamp 1.3.6.1.4.1.562.14.2.4.13.1.5
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

lcName 1.3.6.1.4.1.562.14.2.4.13.1.6
Indicates the configured name for the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lcCardId 1.3.6.1.4.1.562.14.2.4.13.1.7
This object identifies the device that hosts the failed link. It provides a physical description of the device, as well as its slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lcLinkSet 1.3.6.1.4.1.562.14.2.4.13.1.8
This object identifies the linkset associated with the link via its adjacent point code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ss7ISUPFailureAlarmTable 1.3.6.1.4.1.562.14.2.4.14
The SS7ISUPFailureAlarmTable contains alarms for SS7 ISUP protocol stack failures.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7ISUPFailureAlarmTableEntry

ss7ISUPFailureAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.14.1
This object defines a row within the SS7 ISUP Failure Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7ISUPFailureAlarmTableEntry  

ifIndex 1.3.6.1.4.1.562.14.2.4.14.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ifKey 1.3.6.1.4.1.562.14.2.4.14.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ifIPAddress 1.3.6.1.4.1.562.14.2.4.14.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ifTimeStamp 1.3.6.1.4.1.562.14.2.4.14.1.4
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

ifName 1.3.6.1.4.1.562.14.2.4.14.1.5
Indicates the configured name for the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ss7ISUPCongestionAlarmTable 1.3.6.1.4.1.562.14.2.4.15
The SS7ISUPCongestionAlarmTable contains alarms to indicate congestion with an ISUP protocol stack.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7ISUPCongestionAlarmTableEntry

ss7ISUPCongestionAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.15.1
This object defines a row within the SS7 ISUP Congestion Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7ISUPCongestionAlarmTableEntry  

icIndex 1.3.6.1.4.1.562.14.2.4.15.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

icKey 1.3.6.1.4.1.562.14.2.4.15.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

icIPAddress 1.3.6.1.4.1.562.14.2.4.15.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

icCongestionLevel 1.3.6.1.4.1.562.14.2.4.15.1.4
This object indicates the congestion level with an ISUP protocol stack. Possible congestion levels are: (0) Normal (1) Congestion
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

icTimeStamp 1.3.6.1.4.1.562.14.2.4.15.1.5
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

icName 1.3.6.1.4.1.562.14.2.4.15.1.6
Indicates the configured name for the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ss7MTP3CongestionAlarmTable 1.3.6.1.4.1.562.14.2.4.16
The SS7MTP3CongestionAlarmTable contains alarms to indicate congestion on an MTP3 link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7MTP3CongestionAlarmTableEntry

ss7MTP3CongestionAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.16.1
This object defines a row within the SS7 MTP3 Congestion Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7MTP3CongestionAlarmTableEntry  

mtp3Index 1.3.6.1.4.1.562.14.2.4.16.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mtp3Key 1.3.6.1.4.1.562.14.2.4.16.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mtp3IPAddress 1.3.6.1.4.1.562.14.2.4.16.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

mtp3CongestionLevel 1.3.6.1.4.1.562.14.2.4.16.1.4
This object indicates the congestion level on a problem SS7 Link. Possible congestion values are: (0) Normal (1) Minor (2) Major (3) Critical
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mtp3TimeStamp 1.3.6.1.4.1.562.14.2.4.16.1.5
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

mtp3Name 1.3.6.1.4.1.562.14.2.4.16.1.6
Represents the configured name of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ss7MTP2TrunkFailureAlarmTable 1.3.6.1.4.1.562.14.2.4.17
The SS7MTP2TrunkFailureAlarmTable contains alarms to indicate MTP2 trunk failures.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7MTP2TrunkFailureAlarmTableEntry

ss7MTP2TrunkFailureAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.17.1
This object defines a row within the SS7 MTP2 Failure Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7MTP2TrunkFailureAlarmTableEntry  

mtp2Index 1.3.6.1.4.1.562.14.2.4.17.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mtp2Key 1.3.6.1.4.1.562.14.2.4.17.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mtp2IPAddress 1.3.6.1.4.1.562.14.2.4.17.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

mtp2Name 1.3.6.1.4.1.562.14.2.4.17.1.4
This object identifies the configured name of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mtp2CardId 1.3.6.1.4.1.562.14.2.4.17.1.5
This object indicates the device upon which the affected trunk is hosted. The string contains a physical description of the device, as well as its slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mtp2AlarmCondition 1.3.6.1.4.1.562.14.2.4.17.1.6
This object indicates which of the possible alarm conditions is in effect. Alarms are not nested: a new alarm is only reported if there is no current alarm condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MTP2AlarmConditionType  

mtp2TimeStamp 1.3.6.1.4.1.562.14.2.4.17.1.7
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

ss7LinksetFailureAlarmTable 1.3.6.1.4.1.562.14.2.4.18
The SS7LinksetFailureAlarmTable contains alarms to indicate failure on an CSG linkset.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7LinksetFailureAlarmTableEntry

ss7LinksetFailureAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.18.1
This object defines a row within the SS7 Linkset Failure Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7LinksetFailureAlarmTableEntry  

lsFailureIndex 1.3.6.1.4.1.562.14.2.4.18.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

lsFailureKey 1.3.6.1.4.1.562.14.2.4.18.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsFailureIPAddress 1.3.6.1.4.1.562.14.2.4.18.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

lsFailureName 1.3.6.1.4.1.562.14.2.4.18.1.4
Represents the configured name of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lsFailurePointcode 1.3.6.1.4.1.562.14.2.4.18.1.5
This object indicates the pointcode associated with the linkset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lsFailureTimeStamp 1.3.6.1.4.1.562.14.2.4.18.1.6
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

ss7DestinationInaccessibleAlarmTable 1.3.6.1.4.1.562.14.2.4.19
The SS7DestinationAccessAlarmTable contains alarms which indicate inaccessible signalling destinations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7DestinationInaccessibleAlarmTableEntry

ss7DestinationInaccessibleAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.19.1
This object defines a row within the SS7 Destination Inaccessible Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7DestinationInaccessibleAlarmTableEntry  

destInaccessIndex 1.3.6.1.4.1.562.14.2.4.19.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

destInaccessKey 1.3.6.1.4.1.562.14.2.4.19.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

destInaccessIPAddress 1.3.6.1.4.1.562.14.2.4.19.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

destInaccessName 1.3.6.1.4.1.562.14.2.4.19.1.4
Represents the configured name of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

destInaccessPointcode 1.3.6.1.4.1.562.14.2.4.19.1.5
This object indicates the point code of the inaccessible signalling destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

destInaccessTimeStamp 1.3.6.1.4.1.562.14.2.4.19.1.6
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

ss7DestinationCongestedAlarmTable 1.3.6.1.4.1.562.14.2.4.20
The SS7DestinationCongestedAlarmTable contains alarms to indicate congestion on the given destination.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7DestinationCongestedAlarmTableEntry

ss7DestinationCongestedAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.20.1
This object defines a row within the SS7 Destination Congestion Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7DestinationCongestedAlarmTableEntry  

destCongestIndex 1.3.6.1.4.1.562.14.2.4.20.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

destCongestKey 1.3.6.1.4.1.562.14.2.4.20.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

destCongestIPAddress 1.3.6.1.4.1.562.14.2.4.20.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

destCongestName 1.3.6.1.4.1.562.14.2.4.20.1.4
Represents the configured name of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

destCongestPointcode 1.3.6.1.4.1.562.14.2.4.20.1.5
This object indicates the pointcode of the congested destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

destCongestCongestionLevel 1.3.6.1.4.1.562.14.2.4.20.1.6
This object indicates the congestion level on a problem SS7 pointcode. Possible congestion values are: (0) Normal (1) Minor (2) Major (3) Critical
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

destCongestTimeStamp 1.3.6.1.4.1.562.14.2.4.20.1.7
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

ss7LinkAlignmentAlarmTable 1.3.6.1.4.1.562.14.2.4.21
The SS7LinkAlignmentAlarmTable contains alarms to indicate congestion on the CSG.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SS7LinkAlignmentAlarmTableEntry

ss7LinkAlignmentAlarmTableEntry 1.3.6.1.4.1.562.14.2.4.21.1
This object defines a row within the SS7 Link Alignment Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SS7LinkAlignmentAlarmTableEntry  

linkAlignIndex 1.3.6.1.4.1.562.14.2.4.21.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

linkAlignKey 1.3.6.1.4.1.562.14.2.4.21.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkAlignIPAddress 1.3.6.1.4.1.562.14.2.4.21.1.3
This object identifies the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

linkAlignName 1.3.6.1.4.1.562.14.2.4.21.1.4
Represents the configured name of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

linkAlignLinkCode 1.3.6.1.4.1.562.14.2.4.21.1.5
This object identifies the signalling link code (SLC) of the affected link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkAlignTimeStamp 1.3.6.1.4.1.562.14.2.4.21.1.6
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

linkAlignCardId 1.3.6.1.4.1.562.14.2.4.21.1.7
This object identifies the device that hosts the failed link. It provides a physical description of the device, as well as its slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

linkAlignLinkSet 1.3.6.1.4.1.562.14.2.4.21.1.8
This object identifies the linkset associated with the link via its adjacent point code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

csgComplexStateTrapInfo 1.3.6.1.4.1.562.14.2.4.22
OBJECT IDENTIFIER    

cplxName 1.3.6.1.4.1.562.14.2.4.22.1
CLLI, A unique identifier of the CSG Complex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxLocEthernetName 1.3.6.1.4.1.562.14.2.4.22.2
The EthernetName attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxLocEthernetIP 1.3.6.1.4.1.562.14.2.4.22.3
The EthernetIP attribute value of the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cplxLocOperationalState 1.3.6.1.4.1.562.14.2.4.22.4
The OperationalState of the node. Possible values are: UNKNOWN, ENABLED, ENABLED_NETDSC, ENABLED_NETPAR, DISABLED
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxLocStandbyState 1.3.6.1.4.1.562.14.2.4.22.5
The StandbyState attribute value of the node. Possible values are: UNKNOWN, HOT_STANDBY, COLD_STANDBY, WARM_STANDBY, PROVIDING_SERVICE
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxLocAvailabilityState 1.3.6.1.4.1.562.14.2.4.22.6
The AvailabilityState attribute value of the node. Possible values are: UNKNOWN, AVAILABLE, DEGRADED, OFFLINE
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxMateEthernetName 1.3.6.1.4.1.562.14.2.4.22.7
The EthernetName attribute value of the mate node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxMateEthernetIP 1.3.6.1.4.1.562.14.2.4.22.8
The EthernetIP attribute value of the mate node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cplxMateOperationalState 1.3.6.1.4.1.562.14.2.4.22.9
The OperationalState of the mate node. Possible values are: UNKNOWN, ENABLED, ENABLED_NETDSC, ENABLED_NETPAR, DISABLED
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxMateStandbyState 1.3.6.1.4.1.562.14.2.4.22.10
The StandbyState attribute value of the mate node. Possible values are: UNKNOWN, HOT_STANDBY, COLD_STANDBY, WARM_STANDBY, PROVIDING_SERVICE
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxMateAvailabilityState 1.3.6.1.4.1.562.14.2.4.22.11
The AvailabilityState attribute value of the mate node. Possible values are: UNKNOWN, AVAILABLE, DEGRADED, OFFLINE
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cplxAlarmStatus 1.3.6.1.4.1.562.14.2.4.22.12
This object indicates the alarm status of the CSG Complex. Possible status are: NORMAL, MAJOR, CRITICAL
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lostServerAlarmTable 1.3.6.1.4.1.562.14.2.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LostServerAlarmTableEntry

lostServerAlarmTableEntry 1.3.6.1.4.1.562.14.2.5.1.1
This object defines a row within the Lost Server Alarm Table. A row can be uniquely identified with the row index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LostServerAlarmTableEntry  

lsIndex 1.3.6.1.4.1.562.14.2.5.1.1.1
Identifies the row number in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

lsKey 1.3.6.1.4.1.562.14.2.5.1.1.2
Unique identifier for the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsIPAddress 1.3.6.1.4.1.562.14.2.5.1.1.3
This object identifies the IP Address of the machine which is lost.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

lsName 1.3.6.1.4.1.562.14.2.5.1.1.4
The configured name associated with the IP Address of the machine which sent the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lsTimeStamp 1.3.6.1.4.1.562.14.2.5.1.1.5
Indicates the time of the alarm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeString  

alarmMaskInt1 1.3.6.1.4.1.562.14.2.4.1
The value of this bit mask reflects the current filtering policy of CSG events and alarms. Management stations which wish to not receive certain events or alarm types from the CSG can modify this value as needed. Note, however, that changes in the filtration policy affect what is received by all management stations. Initially, the bit mask is set so that all bits are in a false state. Each bit in a true state reflects a currently filtered event, alarm, or alarm type. The actual bit position meanings are given below. Bit 0 is LSB. Bits 0 = Generic Normal Alarm 1 = Generic Warning Alarm 2 = Generic Minor Alarm 3 = Generic Major Alarm 4 = Generic Critical Alarm 5 = Partition Space Alarm 6 = Home Gateway Failure Alarm 7 = Component Not In Provisioned State Alarm 8 = Component Debug On Alarm 9 = Component Multiple Restart Alarm 10 = Component Restart Warning 11 = NAS Registration Failure Warning 12 = NAS Failure Alarm 13 = File Deletion Warning 14 = File Backup Warning 15 = Sysman Restart Warning 16 = File Access Warning 17 = Home Gateway/NAS Provisioning Mismatch Warning 18 = SS7 Link Failure Alarm 19 = SS7 Link Congestion Alarm 20 = ISUP Failure Alarm 21 = ISUP Congestion Alarm 22 = SS7 FEP Congestion Alarm 23 = SS7 BEP Congestion Alarm 24 = High Availability Peer Contact Lost Alarm 25 = SS7 MTP3 Congestion Alarm 26 = SS7 MTP2 Trunk Failure Alarm 27 = SS7 Linkset Failure Alarm 28 = SS7 Destination Inaccessible Alarm 29 = SS7 Destination Congested Alarm 30 = SS7 Link Alignment Failure Alarm
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

alarmStatusInt1 1.3.6.1.4.1.562.14.2.4.2
The value of this bit mask indicates that current status of CSG component alarms. Each components is represented by a single bit within the range occupied by each component alarm type. Each bit in a true state reflects a currently raised alarm. The actual bit position meanings are given below. Bit 0 is the LSB. Bits 0-15 = Component Not In Provisioned State Alarm 16-31 = Component Multi Restart Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

alarmStatusInt2 1.3.6.1.4.1.562.14.2.4.3
The value of this bit mask indicates the current status of active CSG alarms. Component-related alarms occupy a range of bits: each bit within that range represents the alarm status for a particular component. Each bit in a true state reflects a currently raised alarm. The actual bit position meanings are given below. Bit 0 is the LSB. Bits 0-15 = Component Debug On Alarm 16-23 = Partition Space Alarm 24 = Home Gateway Failure Alarm 25 = NAS Failure Alarm 26 = SS7 Link Failure Alarm 27 = SS7 Link Congestion Alarm 28 = ISUP Failure Alarm 29 = ISUP Congestion Alarm 30 = High Availability Peer Contact Lost Alarm 31 = SS7 MTP3 Congestion Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

alarmStatusInt3 1.3.6.1.4.1.562.14.2.4.4
The value of this bit mask indicates the current status of active CSG alarms. Each bit in a true state reflects a currently raised alarm. The actual bit position meanings are given below. Bit 0 is the LSB. Bits 0 = SS7 MTP2 Trunk Failure Alarm 1 = SS7 Linkset Failure Alarm 2 = SS7 Destination Inaccessible Alarm 3 = SS7 Destination Congestion Alarm 4 = SS7 Link Alignment Failure Alarm 5 = CSG Complex Status Alarm 6 = External Ethernet Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

alarmMaskInt2 1.3.6.1.4.1.562.14.2.4.5
The value of this bit mask reflects the current additional filtering policy of CSG events and alarms. Management stations which wish to not receive certain events or alarm types from the CSG can modify this value as needed. Note, however, that changes in the filtration policy affect what is received by all management stations. Initially, the bit mask is set so that all bits are in a false state. Each bit in a true state reflects a currently filtered event, alarm, or alarm type. The actual bit position meanings are given below. Bit 0 is LSB. Bits 0 = External Ethernet Alarm 1 = Cluster Information retrieval Alarm
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

trapCompName 1.3.6.1.4.1.562.14.2.3.1
OID for the Component name.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

trapFileName 1.3.6.1.4.1.562.14.2.3.2
OID for file Name.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

trapDate 1.3.6.1.4.1.562.14.2.3.3
OID for the date.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TimeString  

trapGenericStr1 1.3.6.1.4.1.562.14.2.3.4
OID for the generic data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

trapIdKey 1.3.6.1.4.1.562.14.2.3.5
OID for the identification key.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

trapIPAddress 1.3.6.1.4.1.562.14.2.3.6
OID for IP address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

trapName 1.3.6.1.4.1.562.14.2.3.7
OID for configured name associated with an IpAddress.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

trapTimeStamp 1.3.6.1.4.1.562.14.2.3.8
Indicates the time at which the alarm occurred.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

diskSpaceClear 1001
The Trap generated when a disk partition has a space increase after a previously sent DiskSpaceAlarm.
TRAP-TYPE    

diskSpaceAlarm 1004
The Trap generated when a disk partition is running out of space provisioned state.
TRAP-TYPE    

etherCardTrapClear 1011
The Trap generated when the external ethernet card becomes available.
TRAP-TYPE    

etherCardTrapMajor 1014
The Trap generated when the external ethernet card is down.
TRAP-TYPE    

etherCardTrapCritical 1015
The Trap generated when the external ethernet card is down.
TRAP-TYPE    

compDebugOff 2001
The Trap generated when a Component turns off its debug info.
TRAP-TYPE    

compDebugOn 2002
The Trap generated when a Component turns on its debug info.
TRAP-TYPE    

compStateClear 2011
The Trap generated when a component goes to its provisioned states after a CompStatusAlarm trap has been sent.
TRAP-TYPE    

compStateAlarm 2014
The Trap generated when a component is not in it's provisioned state.
TRAP-TYPE    

restartStateClear 2021
The Trap generated when a component goes to its provisioned states after a RestartStateAlarm trap has been sent.
TRAP-TYPE    

restartStateAlarm 2024
The Trap generated when a component restarts repeatedly.
TRAP-TYPE    

ss7LinkFailureAlarm 3004
Trap generated for an SS7 link failure.
TRAP-TYPE    

ss7LinkFailureClear 3001
Trap generated to clear an SS7 link failure.
TRAP-TYPE    

ss7LinkCongestionAlarm 3012
Trap generated for congestion on an SS7 Link.
TRAP-TYPE    

ss7LinkCongestionClear 3011
Trap generated to indicate there is no longer congestion on an SS7 link.
TRAP-TYPE    

ss7ISUPFailureAlarm 3025
Trap generated to indicate ISUP failure.
TRAP-TYPE    

ss7ISUPFailureClear 3021
Trap generated to clear an ISUP failure alarm.
TRAP-TYPE    

ss7ISUPCongestionAlarm 3033
Trap generated to indicate congestion with the ISUP protocol stack.
TRAP-TYPE    

ss7ISUPCongestionClear 3031
Trap generated to indicate there is no longer congestion with the ISUP protocol stack.
TRAP-TYPE    

ss7FEPCongestionWarning 3042
Notification trap generated to indicate congestion encountered by the SS7 front-end process.
TRAP-TYPE    

ss7BEPCongestionWarning 3052
Notification trap generated to indicate congestion encountered by the SS7 back-end process.
TRAP-TYPE    

ss7MTP3CongestionMinor 3063
Trap generated for MTP3 congestion.
TRAP-TYPE    

ss7MTP3CongestionMajor 3064
Trap generated for MTP3 congestion.
TRAP-TYPE    

ss7MTP3CongestionCritical 3065
Trap generated for MTP3 congestion.
TRAP-TYPE    

ss7MTP3CongestionClear 3061
Trap generated to indicate there is no longer MTP3 congestion.
TRAP-TYPE    

ss7MTP2TrunkFailureAlarm 3075
Trap generated to indicate an MTP2 trunk failure condition.
TRAP-TYPE    

ss7MTP2TrunkFailureClear 3071
Trap generated to clear an MTP2 trunk failure alarm.
TRAP-TYPE    

ss7LinksetFailureAlarm 3085
Trap generated to indicate a linkset failure.
TRAP-TYPE    

ss7LinksetFailureClear 3081
Trap generated to clear a linkset failure alarm.
TRAP-TYPE    

ss7DestinationInaccessible 3092
Trap generated to indicate that a signalling destination is inaccessible. A destination is considered inaccessible once Transfer Prohibited (TFP) messages are received which indicate that the route to that destination is prohibited.
TRAP-TYPE    

ss7DestinationAccessible 3091
Trap generated to clear a destination inacessible alarm. An inaccessible signalling destination is considered accessible once Transfer Allowed (TFA) messages are sent along its prohibited signalling routes.
TRAP-TYPE    

ss7DestinationCongestedAlarm 3103
Trap generated to indicate congestion at an SS7 destination.
TRAP-TYPE    

ss7DestinationCongestedClear 3101
Trap generated to indicate that there is no longer congestion at an SS7 destination.
TRAP-TYPE    

ss7LinkAlignmentFailureAlarm 3114
Trap generated to indicate alignment failure on a datalink.
TRAP-TYPE    

ss7LinkAlignmentFailureClear 3111
Trap generated to clear a datalink alignment failure alarm.
TRAP-TYPE    

ncLostServerTrap 4014
This trap is generated when the CSG loses contact with its peer in the cluster. The variables in this trap identify the server that has been lost. The originator of this trap is implicitly defined.
TRAP-TYPE    

ncFoundServerTrap 4011
This trap is generated when the initially comes into contact with or regains contact with its peer in the cluster. The variables in this trap identify the server that has been found. The originator of this trap is implicitly defined.
TRAP-TYPE    

ncStateChangeTrap 4022
This trap is generated when any of the state values change.
TRAP-TYPE    

csgComplexStateTrapClear 4031
This trap is generated when any of the state values change Severity is determined only by the operational and standby states of both servers.
TRAP-TYPE    

csgComplexStateTrapMajor 4034
This trap is generated when any of the state values change Severity is determined only by the operational and standby states of both servers.
TRAP-TYPE    

csgComplexStateTrapCritical 4035
This trap is generated when any of the state values change Severity is determined only by the operational and standby states of both servers.
TRAP-TYPE    

cisRetrievalFailureTrapMajor 4044
This trap is generated when the TruCluster ASE information retrieval attempts failed repeatedly.
TRAP-TYPE    

genericNormal 9001
The Trap generated for generic normal priority text messages
TRAP-TYPE    

genericWarning 9002
The Trap generated for generic warning priority text messages
TRAP-TYPE    

genericMinor 9003
The Trap generated for generic minor priority text messages
TRAP-TYPE    

genericMajor 9004
The Trap generated for generic major priority text messages
TRAP-TYPE    

genericCritical 9005
The Trap generated for generic critical priority text messages
TRAP-TYPE    

hgStatusClear 9011
The Trap generated when a Home Gateway Status returns to normal after having previously been in the failed status.
TRAP-TYPE    

hgStatusAlarm 9014
The Trap generated when a Home Gateway is indicated to be failed.
TRAP-TYPE    

nasStatusClear 9021
The Trap generated when a rapport registers after having previously been in the failed status.
TRAP-TYPE    

nasStatusAlarm 9024
The Trap generated when a Nas is indicated to be failed.
TRAP-TYPE    

linkOMTable 1.3.6.1.4.1.562.14.2.7.1.1
The LinkTable contains information about each signaling link on the CSG
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LinkOMTableEntry

linkOMTableEntry 1.3.6.1.4.1.562.14.2.7.1.1.1
An entry in the LinkTable. Indexed by linkIndex
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LinkOMTableEntry  

linkOMId 1.3.6.1.4.1.562.14.2.7.1.1.1.1
The id of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkOMSetId 1.3.6.1.4.1.562.14.2.7.1.1.1.2
The id of the linkset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkFailures 1.3.6.1.4.1.562.14.2.7.1.1.1.3
Number of times this signaling link has failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkCongestions 1.3.6.1.4.1.562.14.2.7.1.1.1.4
Number of times this signaling link has Congested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkInhibits 1.3.6.1.4.1.562.14.2.7.1.1.1.5
Number of times this signaling link has been inhibited.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkTransmittedMSUs 1.3.6.1.4.1.562.14.2.7.1.1.1.6
Number of messages sent on this signaling link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkReceivedMSUs 1.3.6.1.4.1.562.14.2.7.1.1.1.7
Number of messages received on this signaling link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

linkRemoteProcOutages 1.3.6.1.4.1.562.14.2.7.1.1.1.8
Number of times the remote processor outgaes have been reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

bLATimerExpiries 1.3.6.1.4.1.562.14.2.7.2.1
Number of times the BLA timer has expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rLCTimerExpiries 1.3.6.1.4.1.562.14.2.7.2.2
Number of times the RLC timer has expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

uBATimerExpiries 1.3.6.1.4.1.562.14.2.7.2.3
Number of times the UBA timer has expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rSATimerExpiries 1.3.6.1.4.1.562.14.2.7.2.4
Number of times the RSA timer has expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

outCallAttempts 1.3.6.1.4.1.562.14.2.7.3.1
Total number of outgoing call legs attempted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

outCallNormalCompletions 1.3.6.1.4.1.562.14.2.7.3.2
Total number of outgoing call legs completed normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

outCallAbnormalCompletions 1.3.6.1.4.1.562.14.2.7.3.3
Total number of outgoing call legs completed abnormally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

userBusyOutCallRejects 1.3.6.1.4.1.562.14.2.7.3.4
Total Number of outgoing call legs rejected due to user busy signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tempFailOutCallRejects 1.3.6.1.4.1.562.14.2.7.3.5
Total Number of outgoing call legs rejected due to temporary failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

userUnavailableOutCallRejects 1.3.6.1.4.1.562.14.2.7.3.6
Total number of outgoing call legs failed due to user not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

abnormalReleaseOutCallRejects 1.3.6.1.4.1.562.14.2.7.3.7
Total Number of outgoing call legs rejected due to abnormal release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

otherOutCallRejects 1.3.6.1.4.1.562.14.2.7.3.8
Total Number of outgoing call legs rejected due to other reasons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cumulativeActiveOutCalls 1.3.6.1.4.1.562.14.2.7.3.9
Cumulatvie Number of outgoing call legs active so far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

currentlyActiveOutCalls 1.3.6.1.4.1.562.14.2.7.3.10
Total Number of outgoing call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

currentlyActiveDigitalOutCalls 1.3.6.1.4.1.562.14.2.7.3.11
Total Number of outgoing digital call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

currentlyActiveAnalogOutCalls 1.3.6.1.4.1.562.14.2.7.3.12
Total Number of outgoing analog call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

inCallAttempts 1.3.6.1.4.1.562.14.2.7.3.13
Total number of incoming call legs attempted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

inCallNormalCompletions 1.3.6.1.4.1.562.14.2.7.3.14
Total number of incoming call legs completed normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

inCallAbnormalCompletions 1.3.6.1.4.1.562.14.2.7.3.15
Total number of incoming call legs completed abnormally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

userBusyInCallRejects 1.3.6.1.4.1.562.14.2.7.3.16
Total Number of incoming call legs rejected due to user busy signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

tempFailInCallRejects 1.3.6.1.4.1.562.14.2.7.3.17
Total Number of incoming call legs rejected due to temporary failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

userUnavailableInCallRejects 1.3.6.1.4.1.562.14.2.7.3.18
Total number of incoming call legs failed due to user not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

abnormalReleaseInCallRejects 1.3.6.1.4.1.562.14.2.7.3.19
Total Number of incoming call legs rejected due to abnormal release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

otherInCallRejects 1.3.6.1.4.1.562.14.2.7.3.20
Total Number of incoming call legs rejected due to other reasons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cumulativeActiveInCalls 1.3.6.1.4.1.562.14.2.7.3.21
Cumulatvie Number of incoming call legs active so far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

currentlyActiveInCalls 1.3.6.1.4.1.562.14.2.7.3.22
Total Number of incoming call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

currentlyActiveDigitalInCalls 1.3.6.1.4.1.562.14.2.7.3.23
Total Number of incoming digital call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

currentlyActiveAnalogInCalls 1.3.6.1.4.1.562.14.2.7.3.24
Total Number of incoming analog call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCallOMTable 1.3.6.1.4.1.562.14.2.7.4.1
The TrunkCallOMTable contains call related OMs on a trunk group basis
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkCallOMTableEntry

trunkCallOMTableEntry 1.3.6.1.4.1.562.14.2.7.4.1.1
An entry in the TrunkCallOMTable. Indexed by trunkCallOMIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrunkCallOMTableEntry  

trunkCallOMIndex 1.3.6.1.4.1.562.14.2.7.4.1.1.1
Identifies a trunk group index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

trunkGroupCLLI 1.3.6.1.4.1.562.14.2.7.4.1.1.2
The Common Language Location Identifier(CLLI), a unique alphanumeric value to identify this Trunk Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

numberOfCircuits 1.3.6.1.4.1.562.14.2.7.4.1.1.3
Total Number of Circuits provisioned against this trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkOutCallAttempts 1.3.6.1.4.1.562.14.2.7.4.1.1.4
Total number of outgoing call legs attempted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkOutCallNormalCompletions 1.3.6.1.4.1.562.14.2.7.4.1.1.5
Total number of outgoing call legs completed normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkOutCallAbnormalCompletions 1.3.6.1.4.1.562.14.2.7.4.1.1.6
Total number of outgoing call legs completed abnormally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkUserBusyOutCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.7
Total Number of outgoing call legs rejected due to user busy signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkTempFailOutCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.8
Total Number of outgoing call legs rejected due to temporary failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkUserUnavailableOutCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.9
Total number of outgoing call legs failed due to user not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkAbnormalReleaseOutCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.10
Total Number of outgoing call legs rejected due to abnormal release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkOtherOutCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.11
Total Number of outgoing call legs rejected due to other reasons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCumulativeActiveOutCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.12
Cumulatvie Number of outgoing call legs active so far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCurrentlyActiveOutCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.13
Total Number of outgoing call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCurrentlyActiveDigitalOutCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.14
Total Number of outgoing digital call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCurrentlyActiveAnalogOutCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.15
Total Number of outgoing analog call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkInCallAttempts 1.3.6.1.4.1.562.14.2.7.4.1.1.16
Total number of incoming call legs attempted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkInCallNormalCompletions 1.3.6.1.4.1.562.14.2.7.4.1.1.17
Total number of incoming call legs completed normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkInCallAbnormalCompletions 1.3.6.1.4.1.562.14.2.7.4.1.1.18
Total number of incoming call legs completed abnormally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkUserBusyInCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.19
Total Number of incoming call legs rejected due to user busy signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkTempFailInCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.20
Total Number of incoming call legs rejected due to temporary failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkUserUnavailableInCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.21
Total number of incoming call legs failed due to user not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkAbnormalReleaseInCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.22
Total Number of incoming call legs rejected due to abnormal release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkOtherInCallRejects 1.3.6.1.4.1.562.14.2.7.4.1.1.23
Total Number of incoming call legs rejected due to other reasons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCumulativeActiveInCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.24
Cumulatvie Number of incoming call legs active so far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCurrentlyActiveInCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.25
Total Number of incoming call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCurrentlyActiveDigitalInCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.26
Total Number of incoming digital call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkCurrentlyActiveAnalogInCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.27
Total Number of incoming analog call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trunkAllActiveCalls 1.3.6.1.4.1.562.14.2.7.4.1.1.28
Total number of currently active call legs (all type).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkOccupancyPerCCS 1.3.6.1.4.1.562.14.2.7.4.1.1.29
Trunk occupancy in Centum Call Seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trafficInCCSs 1.3.6.1.4.1.562.14.2.7.4.1.1.30
Scanned om for tgms that are call busy
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

trafficInCCSIncomings 1.3.6.1.4.1.562.14.2.7.4.1.1.31
Scanned Om on tgms with an incoming call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

localBusyInCCSs 1.3.6.1.4.1.562.14.2.7.4.1.1.32
Scanned om for tgms that are locally blocked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

remoteBusyInCCSs 1.3.6.1.4.1.562.14.2.7.4.1.1.33
Scanned om for tgms that are remoteley blocked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCallOMTable 1.3.6.1.4.1.562.14.2.7.7.1
The NasCallOMTable contains call related OMs on a nas basis
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NasCallOMTableEntry

nasCallOMTableEntry 1.3.6.1.4.1.562.14.2.7.7.1.1
An entry in the NasCallOMTable. Indexed by nasCallOMIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NasCallOMTableEntry  

nasCallOMIndex 1.3.6.1.4.1.562.14.2.7.7.1.1.1
Identifies a nas Call OM .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

nasName1 1.3.6.1.4.1.562.14.2.7.7.1.1.2
A unique alphanumeric value to identify this Nas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

numberOfPorts 1.3.6.1.4.1.562.14.2.7.7.1.1.3
Total Number of Ports provisioned against this nas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nasOutCallAttempts 1.3.6.1.4.1.562.14.2.7.7.1.1.4
Total number of outgoing call legs attempted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasOutCallNormalCompletions 1.3.6.1.4.1.562.14.2.7.7.1.1.5
Total number of outgoing call legs completed normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasOutCallAbnormalCompletions 1.3.6.1.4.1.562.14.2.7.7.1.1.6
Total number of outgoing call legs completed abnormally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasUserBusyOutCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.7
Total Number of outgoing call legs rejected due to user busy signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasTempFailOutCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.8
Total Number of outgoing call legs rejected due to temporary failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasUserUnavailableOutCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.9
Total number of outgoing call legs failed due to user not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasAbnormalReleaseOutCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.10
Total Number of outgoing call legs rejected due to abnormal release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasOtherOutCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.11
Total Number of outgoing call legs rejected due to other reasons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCumulativeActiveOutCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.12
Cumulatvie Number of outgoing call legs active so far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCurrentlyActiveOutCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.13
Total Number of outgoing call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCurrentlyActiveDigitalOutCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.14
Total Number of outgoing digital call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCurrentlyActiveAnalogOutCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.15
Total Number of outgoing analog call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasInCallAttempts 1.3.6.1.4.1.562.14.2.7.7.1.1.16
Total number of incoming call legs attempted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasInCallNormalCompletions 1.3.6.1.4.1.562.14.2.7.7.1.1.17
Total number of incoming call legs completed normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasInCallAbnormalCompletions 1.3.6.1.4.1.562.14.2.7.7.1.1.18
Total number of incoming call legs completed abnormally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasUserBusyInCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.19
Total Number of incoming call legs rejected due to user busy signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasTempFailInCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.20
Total Number of incoming call legs rejected due to temporary failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasUserUnavailableInCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.21
Total number of incoming call legs failed due to user not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasAbnormalReleaseInCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.22
Total Number of incoming call legs rejected due to abnormal release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasOtherInCallRejects 1.3.6.1.4.1.562.14.2.7.7.1.1.23
Total Number of incoming call legs rejected due to other reasons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCumulativeActiveInCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.24
Cumulatvie Number of incoming call legs active so far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCurrentlyActiveInCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.25
Total Number of incoming call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCurrentlyActiveDigitalInCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.26
Total Number of incoming digital call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasCurrentlyActiveAnalogInCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.27
Total Number of incoming analog call legs currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nasAllActiveCalls 1.3.6.1.4.1.562.14.2.7.7.1.1.28
Total number of currently active call legs (all type).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nasMaxPortsUsed 1.3.6.1.4.1.562.14.2.7.7.1.1.29
Maximum number of ports used in this nas since the last system restart.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nasMinPortsUsed 1.3.6.1.4.1.562.14.2.7.7.1.1.30
Minimum number of ports used in this nas since the last system restart.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nasCurrentlyInUsePorts 1.3.6.1.4.1.562.14.2.7.7.1.1.31
Number of ports currently in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

phoneCallOMTable 1.3.6.1.4.1.562.14.2.7.5.1
The PhoneCallOMTable contains call related OMs on a phone number basis
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PhoneCallOMTableEntry

phoneCallOMTableEntry 1.3.6.1.4.1.562.14.2.7.5.1.1
An entry in the PhoneCallOMTable. Indexed by phoneGroupIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PhoneCallOMTableEntry  

phoneCallOMIndex 1.3.6.1.4.1.562.14.2.7.5.1.1.1
Uniquely identifies an entry in this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

phoneNumber 1.3.6.1.4.1.562.14.2.7.5.1.1.2
Phone number for the underlying Call OM record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

phoneDialCallAttempts 1.3.6.1.4.1.562.14.2.7.5.1.1.3
Total number of dial calls attempted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneDialCallNormalCompletions 1.3.6.1.4.1.562.14.2.7.5.1.1.4
Total number of dial calls completed normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneDialCallAbnormalCompletions 1.3.6.1.4.1.562.14.2.7.5.1.1.5
Total number of dial calls completed abnormally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneUserBusyDialCallRejects 1.3.6.1.4.1.562.14.2.7.5.1.1.6
Total Number of dial calls rejected due to user busy signal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneTempFailDialCallRejects 1.3.6.1.4.1.562.14.2.7.5.1.1.7
Total Number of dial calls rejected due to temporary failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneUserUnavailableDialCallRejects 1.3.6.1.4.1.562.14.2.7.5.1.1.8
Total number of dial calls failed due to user not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneAbnormalReleaseDialCallRejects 1.3.6.1.4.1.562.14.2.7.5.1.1.9
Total Number of dial calls rejected due to abnormal release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneOtherDialCallRejects 1.3.6.1.4.1.562.14.2.7.5.1.1.10
Total Number of dial calls rejected due to other reasons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneCumulativeActiveDialCalls 1.3.6.1.4.1.562.14.2.7.5.1.1.11
Cumulatvie Number of dial calls active so far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneCurrentlyActiveDialCalls 1.3.6.1.4.1.562.14.2.7.5.1.1.12
Total Number of dial calls currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneCurrentlyActiveDigitalDialCalls 1.3.6.1.4.1.562.14.2.7.5.1.1.13
Total Number of digital dial calls currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

phoneCurrentlyActiveAnalogDialCalls 1.3.6.1.4.1.562.14.2.7.5.1.1.14
Total Number of analog dial calls currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

csgComplexCLLI 1.3.6.1.4.1.562.14.2.7.6.1
A unique identifier of the CSG Complex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

serverHostName 1.3.6.1.4.1.562.14.2.7.6.2
Host Name of this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

serverIpAddress 1.3.6.1.4.1.562.14.2.7.6.3
IP address of this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

serverCLLI 1.3.6.1.4.1.562.14.2.7.6.4
A unique identifier of this server (common in the telco world).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mateServerHostName 1.3.6.1.4.1.562.14.2.7.6.5
Host Name of this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mateServerIpAddress 1.3.6.1.4.1.562.14.2.7.6.6
IP address of this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

serverMemSize 1.3.6.1.4.1.562.14.2.7.6.8
Memory size in mega bytes of this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

provisionedDPCs 1.3.6.1.4.1.562.14.2.7.6.9
Number of destination point codes provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

provisionedCircuits 1.3.6.1.4.1.562.14.2.7.6.10
Number of circuits provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

inserviceCircuits 1.3.6.1.4.1.562.14.2.7.6.11
Number of circuits in service. This number goes up or down at any given time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

provisionedNASes 1.3.6.1.4.1.562.14.2.7.6.12
Number of NASes provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

aliveNASes 1.3.6.1.4.1.562.14.2.7.6.13
Number of NASes known to be alive. This number goes up or down at any given time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

inserviceNASes 1.3.6.1.4.1.562.14.2.7.6.14
Number of NASes in service. This number goes up or down at any given time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

provsionedCards 1.3.6.1.4.1.562.14.2.7.6.15
Number of NAS cards provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

inserviceCards 1.3.6.1.4.1.562.14.2.7.6.16
Number of NAS cards in service. This number goes up or down at any given time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

provisionedPorts 1.3.6.1.4.1.562.14.2.7.6.17
Number of ports provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

inservicePorts 1.3.6.1.4.1.562.14.2.7.6.18
Number of ports in service. This number goes up or down at any given time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userCPUUsage 1.3.6.1.4.1.562.14.2.7.6.19
Percentage of CPU used in user domain. Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemCPUUsage 1.3.6.1.4.1.562.14.2.7.6.20
Percentage of CPU used in system domain in this server. Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

totalCPUUsage 1.3.6.1.4.1.562.14.2.7.6.21
Percentage of CPU used in total in this server Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

maxCPUUsage 1.3.6.1.4.1.562.14.2.7.6.22
High water measurement. Maximum CPU Usage (%) in this server. Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

avgLoad 1.3.6.1.4.1.562.14.2.7.6.23
Average CPU load factor in this server. Survman computes this value in every 600 seconds. The value stored in the MIB will be the last one computed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemCallRate 1.3.6.1.4.1.562.14.2.7.6.24
System Call rate (per second) in this Cserver. Survman computes this value in every 600 seconds. The value stored in the MIB will be the one computed the last time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

contextSwitchRate 1.3.6.1.4.1.562.14.2.7.6.25
Process context switching rate (per second) in this server. Survman computes this value in every 600 seconds. The value stored in the MIB will be the one computed the last time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lastUpdateOMFile 1.3.6.1.4.1.562.14.2.7.6.26
Name of the last updated OM file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString