ITOUCH-CONCENTRATOR-MIB

File: ITOUCH-CONCENTRATOR-MIB.mib (38974 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
ITOUCH-CHASSIS-MIB ITOUCH-MIB

Imported symbols

Counter TimeTicks DisplayString
OBJECT-TYPE Letter IOType
iTouch

Defined Types

ConcentratorSlotEntry  
SEQUENCE    
  concentratorSlotIndex INTEGER
  concentratorSlotIOType IOType
  concentratorSlotIOFirmwareVersion INTEGER
  concentratorSlotIOOperStatus INTEGER
  concentratorSlotUptime TimeTicks
  concentratorSlotNumPorts INTEGER

ConcentratorSlotRingEntry  
SEQUENCE    
  concentratorSlotSlotIndex INTEGER
  concentratorSlotRingIndex INTEGER
  concentratorSlotRingAdminName DisplayString
  concentratorSlotRingAdminSpeed INTEGER
  concentratorSlotRingAdminState INTEGER
  concentratorSlotRingZero INTEGER
  concentratorSlotRingSinceZero TimeTicks
  concentratorSlotRingChassisRing Letter
  concentratorSlotRingOperName DisplayString
  concentratorSlotRingOperSpeed INTEGER
  concentratorSlotRingOperState INTEGER
  concentratorSlotRingChassisRingsAllowed OCTET STRING

ConcentratorChassisRingEntry  
SEQUENCE    
  concentratorChassisRingIndex Letter
  concentratorChassisRingName DisplayString
  concentratorChassisRingSpeed INTEGER
  concentratorChassisRingTopologyChanges Counter
  concentratorChassisRingZero INTEGER
  concentratorChassisRingSinceZero TimeTicks

ConcentratorChassisRingTopologyEntry  
SEQUENCE    
  concentratorChassisRingTopologySlotIndex INTEGER
  concentratorChassisRingTopologyRingIndex Letter
  concentratorChassisRingTopologyWrapUp INTEGER
  concentratorChassisRingTopologyWrapDown INTEGER
  concentratorChassisRingTopologyUpState INTEGER
  concentratorChassisRingTopologyDownState INTEGER
  concentratorChassisRingTopologySegment INTEGER
  concentratorChassisRingTopologyName DisplayString
  concentratorChassisRingTopologySpeed INTEGER
  concentratorChassisRingTopologyCardType IOType
  concentratorChassisRingTopologyAutoUpChanges Counter
  concentratorChassisRingTopologyAutoDownChanges Counter

ConcentratorPortEntry  
SEQUENCE    
  concentratorPortSlotIndex INTEGER
  concentratorPortIndex INTEGER
  concentratorPortName DisplayString
  concentratorPortType INTEGER
  concentratorPortZero INTEGER
  concentratorPortSinceZero TimeTicks
  concentratorPortAdminState INTEGER
  concentratorPortOperState INTEGER
  concentratorPortInsertions Counter
  concentratorPortInsertFailures Counter
  concentratorPortAdminInsert INTEGER
  concentratorPortOperInsert INTEGER
  concentratorPortSpeed INTEGER
  concentratorPortAdminLoopback INTEGER
  concentratorPortStationType INTEGER
  concentratorPortAdminTrunkInsert INTEGER
  concentratorPortSlotRingsAllowed OCTET STRING

Defined Values

xConcentrator 1.3.6.1.4.1.33.25
OBJECT IDENTIFIER    

concentratorMode 1.3.6.1.4.1.33.25.1
This variable controls the ring mode of the chassis.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER twoRing(1), fourRing(2)  

concentratorManagement 1.3.6.1.4.1.33.25.2
This variable controls the ability to manage token ring concentrators.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

concentratorBuildTopology 1.3.6.1.4.1.33.25.3
This variable causes the chassis token ring topology database to be constructed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

concentratorTopologyLastBuild 1.3.6.1.4.1.33.25.4
This variable contains the value of sysUpTime at the time the chassis token ring topology database was last constructed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

concentratorChassisRingDefaults 1.3.6.1.4.1.33.25.5
This variable causes the chassis ring area of NVS to be set to defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

concentratorSlotTable 1.3.6.1.4.1.33.25.6
Table of descriptive and status information about a Token Ring Concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ConcentratorSlotEntry

concentratorSlotEntry 1.3.6.1.4.1.33.25.6.1
An entry in the table containing information about a specific concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ConcentratorSlotEntry  

concentratorSlotIndex 1.3.6.1.4.1.33.25.6.1.1
This variable identifies the slot of the chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorSlotIOType 1.3.6.1.4.1.33.25.6.1.2
This variable represents the type of the I/O card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IOType  

concentratorSlotIOFirmwareVersion 1.3.6.1.4.1.33.25.6.1.3
This variable represents the revision level of the firmware on the I/O card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorSlotIOOperStatus 1.3.6.1.4.1.33.25.6.1.4
This variable represents the current operating status of the I/O card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loadRequested(1), loading(2), dumpRequested(3), dumping(4), paramRequested(5), paramLoading(6), running(7), initializing(8), attended(9), internal10(10), internal11(11), inhibited(12), maxserverCard(13), invalidConfigStorage(14), securityLockdown(15)  

concentratorSlotUptime 1.3.6.1.4.1.33.25.6.1.5
This variable contains the value of sysUpTime at the time the concentrator was last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

concentratorSlotNumPorts 1.3.6.1.4.1.33.25.6.1.6
This variable represents the number of Token Ring ports supported by the concentrator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorSlotRingTable 1.3.6.1.4.1.33.25.7
Table of descriptive and status information about the rings of a controller.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ConcentratorSlotRingEntry

concentratorSlotRingEntry 1.3.6.1.4.1.33.25.7.1
An entry in the table containing information about a specific ring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ConcentratorSlotRingEntry  

concentratorSlotSlotIndex 1.3.6.1.4.1.33.25.7.1.1
This variable identifies the slot of the chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorSlotRingIndex 1.3.6.1.4.1.33.25.7.1.2
This variable identifies the ring within the slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorSlotRingAdminName 1.3.6.1.4.1.33.25.7.1.3
This variable represents the user defined name of the ring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

concentratorSlotRingAdminSpeed 1.3.6.1.4.1.33.25.7.1.4
This variable represents the user defined speed of the ring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mbps4(1), mbps16(2)  

concentratorSlotRingAdminState 1.3.6.1.4.1.33.25.7.1.5
This variable defines whether the slot ring is to be inserted into the defined chassis ring or is to be isolated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isolated(1), inserted(2)  

concentratorSlotRingZero 1.3.6.1.4.1.33.25.7.1.6
This variable is used to control the slot ring's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

concentratorSlotRingSinceZero 1.3.6.1.4.1.33.25.7.1.7
This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoSlotRingZero is written with the value 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

concentratorSlotRingChassisRing 1.3.6.1.4.1.33.25.7.1.8
This variable represents the chassis ring into which the slot ring is to be inserted if it is to be inserted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Letter  

concentratorSlotRingOperName 1.3.6.1.4.1.33.25.7.1.9
This variable represents the name currently being used to identify the slot ring. If inserted, this name will be the user defined name of the chassis ring into which it is inserted. If isolated, this name will be the user defined name of the slot ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

concentratorSlotRingOperSpeed 1.3.6.1.4.1.33.25.7.1.10
This variable represents the current speed of the slot ring. If inserted, this speed will be the user defined speed of the chassis ring into which it is inserted. If isolated, this speed will be the user defined speed of the slot ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mbps4(1), mbps16(2)  

concentratorSlotRingOperState 1.3.6.1.4.1.33.25.7.1.11
This variable indicates whether the slot ring is inserted into the defined chassis ring or is isolated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(1), inserted(2)  

concentratorSlotRingChassisRingsAllowed 1.3.6.1.4.1.33.25.7.1.12
The list of chassis rings into which this slot ring may be inserted. The OCTET STRING contains a bit map, with a bit for 'none' (indicating it may be isolated) and one bit for each chassis ring, and enough octets for all chassis rings. The high order bit of the first octet corresponds to 'none' and each subsequent bit in ascending order corresponds to the chassis rings in order beginning with A.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

concentratorChassisRingTable 1.3.6.1.4.1.33.25.8
Table of descriptive and status information about the rings of a the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ConcentratorChassisRingEntry

concentratorChassisRingEntry 1.3.6.1.4.1.33.25.8.1
An entry in the table containing information about a specific ring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ConcentratorChassisRingEntry  

concentratorChassisRingIndex 1.3.6.1.4.1.33.25.8.1.1
This variable identifies the ring of the chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Letter  

concentratorChassisRingName 1.3.6.1.4.1.33.25.8.1.2
This variable represents the name of the ring. All segments of a given chassis ring will have the same base name, All segment of that ring will appear as 'baseNamex' where x is the identified segment
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..14)  

concentratorChassisRingSpeed 1.3.6.1.4.1.33.25.8.1.3
This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mbps4(1), mbps16(2)  

concentratorChassisRingTopologyChanges 1.3.6.1.4.1.33.25.8.1.4
This variable reflects the number of times the topology has changed for this ring. This variable is set to zero when concentratorChassisRingZero is written with the value 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

concentratorChassisRingZero 1.3.6.1.4.1.33.25.8.1.5
This variable is used to control the ring's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

concentratorChassisRingSinceZero 1.3.6.1.4.1.33.25.8.1.6
This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoChassisRingZero is written with the value 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

concentratorChassisRingTopologyTable 1.3.6.1.4.1.33.25.9
Table of descriptive and status information about the segments of the chassis rings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ConcentratorChassisRingTopologyEntry

concentratorChassisRingTopologyEntry 1.3.6.1.4.1.33.25.9.1
An entry in the table containing information about a specific ring segment.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ConcentratorChassisRingTopologyEntry  

concentratorChassisRingTopologySlotIndex 1.3.6.1.4.1.33.25.9.1.1
This variable identifies a slot number that is included in the ring segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorChassisRingTopologyRingIndex 1.3.6.1.4.1.33.25.9.1.2
This variable identifies the ring of the chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Letter  

concentratorChassisRingTopologyWrapUp 1.3.6.1.4.1.33.25.9.1.3
This variable represents the upper wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segment which would contain this slot, and all slots above this one which are on the same segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unwrap(1), wrap(2)  

concentratorChassisRingTopologyWrapDown 1.3.6.1.4.1.33.25.9.1.4
This variable represents the lower wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segment which would contain this slot, and all slots below this one which are on the same segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unwrap(1), wrap(2)  

concentratorChassisRingTopologyUpState 1.3.6.1.4.1.33.25.9.1.5
This variable represents the type of upper wrap for the chassis ring which passes through this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

concentratorChassisRingTopologyDownState 1.3.6.1.4.1.33.25.9.1.6
This variable represents the type of lower wrap for the chassis ring which passes through this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

concentratorChassisRingTopologySegment 1.3.6.1.4.1.33.25.9.1.7
This variable represents the segment number for the chassis ring which passes through this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorChassisRingTopologyName 1.3.6.1.4.1.33.25.9.1.8
This variable represents the name of the ring segment. The ring segment name is the base ring name with '-segment number' appended to the end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

concentratorChassisRingTopologySpeed 1.3.6.1.4.1.33.25.9.1.9
This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed as the parent ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mbps4(1), mbps16(2)  

concentratorChassisRingTopologyCardType 1.3.6.1.4.1.33.25.9.1.10
This variable represents the type of the I/O card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IOType  

concentratorChassisRingTopologyAutoUpChanges 1.3.6.1.4.1.33.25.9.1.11
This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap up. This variable is set to zero when concentratorSlotRingZero is written with the value 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

concentratorChassisRingTopologyAutoDownChanges 1.3.6.1.4.1.33.25.9.1.12
This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap down. This variable is set to zero when concentratorSlotRingZero is written with the value 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

concentratorPortTable 1.3.6.1.4.1.33.25.10
Table of information and status concerning the ports of a concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ConcentratorPortEntry

concentratorPortEntry 1.3.6.1.4.1.33.25.10.1
An entry in the table containing control and status information for a port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ConcentratorPortEntry  

concentratorPortSlotIndex 1.3.6.1.4.1.33.25.10.1.1
This variable identifies the slot of the chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorPortIndex 1.3.6.1.4.1.33.25.10.1.2
This variable identifies target port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

concentratorPortName 1.3.6.1.4.1.33.25.10.1.3
This variable represents the user defined name of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

concentratorPortType 1.3.6.1.4.1.33.25.10.1.4
This variable represents the type of connector provided for the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rj45(1), fiber(2)  

concentratorPortZero 1.3.6.1.4.1.33.25.10.1.5
This variable is used to control the ports counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

concentratorPortSinceZero 1.3.6.1.4.1.33.25.10.1.6
This variable reflects the number of time ticks since the counters were las zeroed. This variable is set to zero when concentratorPortZero is written with the value 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

concentratorPortAdminState 1.3.6.1.4.1.33.25.10.1.7
This variable reflects the enable/disable state of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

concentratorPortOperState 1.3.6.1.4.1.33.25.10.1.8
This variable reflects the enable/disable state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inserted(1), notInserted(2), rateMismatch(3)  

concentratorPortInsertions 1.3.6.1.4.1.33.25.10.1.9
This variable reflects the number of times the port was inserted into the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

concentratorPortInsertFailures 1.3.6.1.4.1.33.25.10.1.10
This variable reflects the number of times the port was not inserted due to a data rate mismatch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

concentratorPortAdminInsert 1.3.6.1.4.1.33.25.10.1.11
This variable reflects the desired insertion of the port. Auto indicates to insert the port into the first slot ring with a matching data rate beginning with 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), ring1(2), ring2(3), ring3(4), ring4(5), ring5(6), ring6(7), ring7(8), ring8(9), ring9(10), ring10(11)  

concentratorPortOperInsert 1.3.6.1.4.1.33.25.10.1.12
This variable reflects the slot ring to which the port is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notInserted(1), ring1(2), ring2(3), ring3(4), ring4(5), ring5(6), ring6(7), ring7(8), ring8(9), ring9(10), ring10(11)  

concentratorPortSpeed 1.3.6.1.4.1.33.25.10.1.13
This variable reflects the measured speed of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mbs4(1), mbs16(2)  

concentratorPortAdminLoopback 1.3.6.1.4.1.33.25.10.1.14
This variable reflects the whether this port will be inserted into a ring or the data loop backed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER insert(1), loopback(2)  

concentratorPortStationType 1.3.6.1.4.1.33.25.10.1.15
This variable reflects the concentrator port type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER station(1), trunk(2)  

concentratorPortAdminTrunkInsert 1.3.6.1.4.1.33.25.10.1.16
This variable is used to control the insertion of trunk ports. When set to 'execute' the trunk port will be inserted into the ring immediately and not wait for the trunk timer to expire. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

concentratorPortSlotRingsAllowed 1.3.6.1.4.1.33.25.10.1.17
The list of slot rings into which this port may be inserted. The OCTET STRING contains a bit map, with a bit for 'none' (indicating it may be isolated) and one bit for each slot ring, and enough octets for all slot rings. The high order bit of the first octet corresponds to 'none' and each subsequent bit in ascending order corresponds to the slot rings in order beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING