ITOUCH-CHASSIS-MIB

File: ITOUCH-CHASSIS-MIB.mib (67151 bytes)

Imported modules

RFC1155-SMI	RFC1213-MIB	BRIDGE-MIB
RFC-1212	ITOUCH-MIB

Imported symbols

Counter	Gauge	IpAddress
DisplayString	MacAddress	OBJECT-TYPE
iTouch	AddressType	HardwareType
IOType

Defined Types

NetworkType
INTEGER	unknown(1), other(2), ethernet(3), tokenRing(4), fddi(5), wan(6), ethernetRepeater(7), tokenRingConcentrator(8), fddiConcentrator(9), atm(10), isdn(11), switchplane(12), switchedEthernet(13)

SerialNumber
OCTET STRING	Size(0..6)

Letter
INTEGER	a(1), b(2), c(3), d(4), e(5), f(6), g(7), h(8), i(9), j(10), k(11), l(12), m(13), n(14), o(15), p(16), q(17), r(18), s(19), t(20), u(21), v(22), w(23), x(24), y(25), z(26)

SegmentEntry
SEQUENCE
	segmentType	NetworkType
	segmentIndex	Letter

PortEntry
SEQUENCE
	portType	NetworkType
	portIndex	INTEGER

ControllerEntry
SEQUENCE
	controllerType	NetworkType
	controllerIndex	INTEGER
	controllerNetwork	OBJECT IDENTIFIER

InterfaceEntry
SEQUENCE
	interfaceIndex	INTEGER
	interfaceNetwork	OBJECT IDENTIFIER

SlotBootControlEntry
SEQUENCE
	slotBootControlSlot	INTEGER
	slotBootControlIndex	INTEGER
	slotBootControlStatus	INTEGER
	slotBootControlController	OBJECT IDENTIFIER
	slotBootControlNetwork	OBJECT IDENTIFIER
	slotBootControlMopFile	DisplayString
	slotBootControlInternetFile	DisplayString
	slotBootControlInternetAddress	IpAddress
	slotBootControlInternetServer	IpAddress
	slotBootControlInternetGateway	IpAddress
	slotBootControlInternetDelimiter	DisplayString

SlotBootControlFlagEntry
SEQUENCE
	slotBootControlFlagLoadBootpTftp	INTEGER
	slotBootControlFlagParamBootpTftp	INTEGER
	slotBootControlFlagDumpBootpTftp	INTEGER
	slotBootControlFlagLoadTftpDirect	INTEGER
	slotBootControlFlagParamTftpDirect	INTEGER
	slotBootControlFlagDumpTftpDirect	INTEGER
	slotBootControlFlagLoadLocal	INTEGER
	slotBootControlFlagParamLocal	INTEGER
	slotBootControlFlagDumpLocal	INTEGER
	slotBootControlFlagLoadMop	INTEGER
	slotBootControlFlagParamMop	INTEGER
	slotBootControlFlagDumpMop	INTEGER
	slotBootControlFlagLoadXmop	INTEGER
	slotBootControlFlagParamXmop	INTEGER
	slotBootControlFlagDumpXmop	INTEGER
	slotBootControlFlagLoadRarpTftp	INTEGER
	slotBootControlFlagParamRarpTftp	INTEGER
	slotBootControlFlagDumpRarpTftp	INTEGER

SlotBootControlStorageEntry
SEQUENCE
	slotBootControlStorageClientSlot	INTEGER
	slotBootControlStorageServerSlot	INTEGER
	slotBootControlStorageStatus	INTEGER
	slotBootControlStorageFailures	Counter

SlotEntry
SEQUENCE
	slotIndex	INTEGER
	slotAdminAction	INTEGER
	slotOperStatus	INTEGER
	slotSecondsSinceReset	Gauge
	slotHardwareType	HardwareType
	slotHardwareSerialNumber	SerialNumber
	slotHardwareRevision	INTEGER
	slotIOCardType	IOType
	slotIOCardSerialNumber	SerialNumber
	slotIOCardOperStatus	INTEGER
	slotBootstrapFirmwareRevision	INTEGER
	slotElementalFirmwareRevision	INTEGER
	slotMemorySize	INTEGER
	slotLedNumber	Gauge
	slotLedStatus	OCTET STRING
	slotBase802Address	MacAddress
	slotIpAddress	IpAddress
	slotPlus5Status	INTEGER
	slotPlus12Status	INTEGER
	slotMinus12Status	INTEGER
	slotPlus5Watts	Gauge
	slotPlus12Watts	Gauge
	slotMinus12Watts	Gauge
	slotIOCardHardwareVersion	INTEGER
	slotRestoreNVS	INTEGER
	slotDefaultNVS	INTEGER

SlotBootEntry
SEQUENCE
	slotBootIndex	INTEGER
	slotBootIfIndex	INTEGER
	slotBootNetwork	OBJECT IDENTIFIER
	slotBootProtocol	INTEGER
	slotBoot802Address	MacAddress
	slotBootAddressType	AddressType
	slotBootAddress	OCTET STRING
	slotBootServerAddressType	AddressType
	slotBootServerAddress	OCTET STRING
	slotBootGatewayAddress	IpAddress
	slotBootFileName	DisplayString
	slotBootBlockNumber	Gauge
	slotBootCrashCode	OCTET STRING

SlotControllerEntry
SEQUENCE
	slotControllerType	NetworkType
	slotControllerIndex	INTEGER
	slotControllerNetwork	OBJECT IDENTIFIER

PowerSupplyEntry
SEQUENCE
	powerSupplyIndex	INTEGER
	powerSupplyAdminAction	INTEGER
	powerSupplyFirmwareVersion	INTEGER
	powerSupplyRedundancyStatus	INTEGER
	powerSupplyPlus5Status	INTEGER
	powerSupplyPlus12Status	INTEGER
	powerSupplyMinus12Status	INTEGER
	powerSupplyThermalWarningStatus	INTEGER
	powerSupplyThermalShutdownStatus	INTEGER
	powerSupplyFanStatus	INTEGER
	powerSupplyHardwareInhibitStatus	INTEGER
	powerSupplyPlus5History	INTEGER
	powerSupplyPlus12History	INTEGER
	powerSupplyMinus12History	INTEGER
	powerSupplyThermalWarningHistory	INTEGER
	powerSupplyThermalShutdownHistory	INTEGER
	powerSupplyFanHistory	INTEGER
	powerSupplyHardwareInhibitHistory	INTEGER
	powerSupplyPlus5Volts	Gauge
	powerSupplyPlus12Volts	Gauge
	powerSupplyMinus12Volts	Gauge
	powerSupplyWatts	Gauge
	powerSupplyWattsMax	Gauge
	powerSupplyChassisWatts	Gauge
	powerSupplyChassisWattsMax	Gauge
	powerSupplyHardwareType	INTEGER

FirmwareUpdateEntry
SEQUENCE
	firmwareUpdateSlotIndex	INTEGER
	firmwareUpdateDefaultFileName	DisplayString
	firmwareUpdateFileName	DisplayString
	firmwareUpdateStatus	INTEGER
	firmwareUpdateState	INTEGER
	firmwareUpdateCompletionStatus	INTEGER
	firmwareUpdateMethod	INTEGER

Defined Values

xChassis		1.3.6.1.4.1.33.16
OBJECT IDENTIFIER

xChassisBasic		1.3.6.1.4.1.33.16.1
OBJECT IDENTIFIER

xSegment		1.3.6.1.4.1.33.16.2
OBJECT IDENTIFIER

xPort		1.3.6.1.4.1.33.16.3
OBJECT IDENTIFIER

xController		1.3.6.1.4.1.33.16.4
OBJECT IDENTIFIER

xInterface		1.3.6.1.4.1.33.16.5
OBJECT IDENTIFIER

xSlotBootControl		1.3.6.1.4.1.33.16.6
OBJECT IDENTIFIER

xSlot		1.3.6.1.4.1.33.16.7
OBJECT IDENTIFIER

xPowerSupply		1.3.6.1.4.1.33.16.8
OBJECT IDENTIFIER

xFirmwareUpdate		1.3.6.1.4.1.33.16.9
OBJECT IDENTIFIER

basicBase802Address		1.3.6.1.4.1.33.16.1.1
Base IEEE 802 global address for the chassis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

basicSlot		1.3.6.1.4.1.33.16.1.2
Chassis slot number (slotIndex) of the system whose agent is supplying this MIB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

basicSlotNumber		1.3.6.1.4.1.33.16.1.3
Number of slots in the chassis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

basicNewBase802Address		1.3.6.1.4.1.33.16.1.4
New base IEEE 802 global address for the chassis. Must be set in conjunction with featType 'changeEthernetAddress' and featKey from the ITouch System MIB.
Status: mandatory	Access: read-write
OBJECT-TYPE
	MacAddress

segmentTable		1.3.6.1.4.1.33.16.2.1
A list of segment entries, one for each segment of each type on the chassis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SegmentEntry

segmentEntry		1.3.6.1.4.1.33.16.2.1.1
Values for a chassis segment.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SegmentEntry

segmentType		1.3.6.1.4.1.33.16.2.1.1.1
The segment type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	NetworkType

segmentIndex		1.3.6.1.4.1.33.16.2.1.1.2
An index value that uniquely identifies a segment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Letter

portIOCardType		1.3.6.1.4.1.33.16.3.1
The hardware type of the I/O card in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IOType

portIOCardSerialNumber		1.3.6.1.4.1.33.16.3.2
The ITouch serial number of the I/O card in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	SerialNumber

portIOCardOperStatus		1.3.6.1.4.1.33.16.3.3
Status of the I/O card relative to the function card in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), mismatch(2), good(3)

portTable		1.3.6.1.4.1.33.16.3.4
A list of port entries, one for each port of each type on the slots I/O card.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortEntry

portEntry		1.3.6.1.4.1.33.16.3.4.1
Values for an I/O card port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PortEntry

portType		1.3.6.1.4.1.33.16.3.4.1.1
The port type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	NetworkType

portIndex		1.3.6.1.4.1.33.16.3.4.1.2
An index value that uniquely identifies a port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

controllerTable		1.3.6.1.4.1.33.16.4.1
A list of controller entries, one for each controller of each type on the local system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ControllerEntry

controllerEntry		1.3.6.1.4.1.33.16.4.1.1
Values for a controller.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ControllerEntry

controllerType		1.3.6.1.4.1.33.16.4.1.1.1
The controller type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	NetworkType

controllerIndex		1.3.6.1.4.1.33.16.4.1.1.2
An index value that uniquely identifies a controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

controllerNetwork		1.3.6.1.4.1.33.16.4.1.1.3
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, portType or controllerType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

interfaceTable		1.3.6.1.4.1.33.16.5.1
A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest numbered interfaces on the system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InterfaceEntry

interfaceEntry		1.3.6.1.4.1.33.16.5.1.1
Values for an interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	InterfaceEntry

interfaceIndex		1.3.6.1.4.1.33.16.5.1.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

interfaceNetwork		1.3.6.1.4.1.33.16.5.1.1.2
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, portType, or controllerType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

slotBootControlTable		1.3.6.1.4.1.33.16.6.1
A list of slot boot control entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlotBootControlEntry

slotBootControlEntry		1.3.6.1.4.1.33.16.6.1.1
Values for a chassis slot.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SlotBootControlEntry

slotBootControlSlot		1.3.6.1.4.1.33.16.6.1.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotBootControlIndex		1.3.6.1.4.1.33.16.6.1.1.2
An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotBootControlStatus		1.3.6.1.4.1.33.16.6.1.1.3
The status of the entry. Set to 'disabled' to disable the entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlController		0.0.1.3.6.1.4.1.33.16.6.1.1.4
The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType. This entry must be compatible with slotBootControlNetwork, including being of the same network type. The value 0.0 indicates default action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

slotBootControlNetwork		0.0.1.3.6.1.4.1.33.16.6.1.1.5
The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentType or portType. This entry must be compatible with slotBootControlController, including being of the same network type. The value 0.0 indicates default action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OBJECT IDENTIFIER

slotBootControlMopFile		1.3.6.1.4.1.33.16.6.1.1.6
The software file name to request for down-line load of the server via MOP or XMOP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

slotBootControlInternetFile		1.3.6.1.4.1.33.16.6.1.1.7
The filename to request when loading an image via TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

slotBootControlInternetAddress		1.3.6.1.4.1.33.16.6.1.1.8
The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

slotBootControlInternetServer		1.3.6.1.4.1.33.16.6.1.1.9
The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

slotBootControlInternetGateway		1.3.6.1.4.1.33.16.6.1.1.10
The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

slotBootControlInternetDelimiter		1.3.6.1.4.1.33.16.6.1.1.11
The character separating the load file directory name from the file name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..1)

slotBootControlFlagTable		1.3.6.1.4.1.33.16.6.2
A list of slot boot control source flag entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlotBootControlFlagEntry

slotBootControlFlagEntry		1.3.6.1.4.1.33.16.6.2.1
Values for a boot control flag.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SlotBootControlFlagEntry

slotBootControlFlagLoadBootpTftp		1.3.6.1.4.1.33.16.6.2.1.1
Control for performing load over BOOTP/TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagParamBootpTftp		1.3.6.1.4.1.33.16.6.2.1.2
Control for performing parameter load over BOOTP/TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagDumpBootpTftp		1.3.6.1.4.1.33.16.6.2.1.3
Control for performing dump over BOOTP/TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagLoadTftpDirect		1.3.6.1.4.1.33.16.6.2.1.4
Control for performing load over direct TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagParamTftpDirect		1.3.6.1.4.1.33.16.6.2.1.5
Control for performing parameter load over direct TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagDumpTftpDirect		1.3.6.1.4.1.33.16.6.2.1.6
Control for performing dump over direct TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagLoadLocal		1.3.6.1.4.1.33.16.6.2.1.7
Control for performing load from a local device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagParamLocal		1.3.6.1.4.1.33.16.6.2.1.8
Control for performing parameter load from a local device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagDumpLocal		1.3.6.1.4.1.33.16.6.2.1.9
Control for performing dump from a local device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagLoadMop		1.3.6.1.4.1.33.16.6.2.1.10
Control for performing load over Digital's MOP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagParamMop		1.3.6.1.4.1.33.16.6.2.1.11
Control for performing parameter load over Digital's MOP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagDumpMop		1.3.6.1.4.1.33.16.6.2.1.12
Control for performing dump over Digital's MOP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagLoadXmop		1.3.6.1.4.1.33.16.6.2.1.13
Control for performing load over ITouch extended MOP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagParamXmop		1.3.6.1.4.1.33.16.6.2.1.14
Control for performing parameter load over ITouch extended MOP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagDumpXmop		1.3.6.1.4.1.33.16.6.2.1.15
Control for performing dump over ITouch extended MOP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagLoadRarpTftp		1.3.6.1.4.1.33.16.6.2.1.16
Control for performing load over RARP/TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagParamRarpTftp		1.3.6.1.4.1.33.16.6.2.1.17
Control for performing parameter load over RARP/TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlFlagDumpRarpTftp		1.3.6.1.4.1.33.16.6.2.1.18
Control for performing dump over RARP/TFTP.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

slotBootControlStorageTable		1.3.6.1.4.1.33.16.6.3
A list of slot boot control Storage entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlotBootControlStorageEntry

slotBootControlStorageEntry		1.3.6.1.4.1.33.16.6.3.1
Values for a chassis slot.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SlotBootControlStorageEntry

slotBootControlStorageClientSlot		1.3.6.1.4.1.33.16.6.3.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotBootControlStorageServerSlot		1.3.6.1.4.1.33.16.6.3.1.2
An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotBootControlStorageStatus		1.3.6.1.4.1.33.16.6.3.1.3
The status of the entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	present(1), failed(2), ok(3), notpresent(4)

slotBootControlStorageFailures		1.3.6.1.4.1.33.16.6.3.1.4
The number of times a read from or write to a given Storage location failed
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

slotTable		1.3.6.1.4.1.33.16.7.1
A list of slot entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlotEntry

slotEntry		1.3.6.1.4.1.33.16.7.1.1
Values for a chassis slot.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SlotEntry

slotIndex		1.3.6.1.4.1.33.16.7.1.1.1
An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found at instance zero are duplicates, that instance does not appear in responses a get-next, that is, the lowest numbered slotIndex returned by get-next is 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotAdminAction		1.3.6.1.4.1.33.16.7.1.1.2
Control to cause reset of the system in a slot. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of slotOperStatus.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), reset(2), resetHold(3)

slotOperStatus		1.3.6.1.4.1.33.16.7.1.1.3
Relative to the chassis, the current operating status of the system in the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	loadRequested(1), loading(2), dumpRequested(3), dumping(4), paramRequested(5), paramLoading(6), running(7), initializing(8), attended(9), internal10(10), internal11(11), inhibited(12), maxserverCard(13), invalidConfigStorage(14), securityLockdown(15), resetHold(64), selfTest(65), notResponding(66), broken(67), unknown(68), notApplicable(69)

slotSecondsSinceReset		1.3.6.1.4.1.33.16.7.1.1.4
The number of seconds since the system in the slot was last reset by hardware or software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

slotHardwareType		1.3.6.1.4.1.33.16.7.1.1.5
The type of hardware in the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	HardwareType

slotHardwareSerialNumber		1.3.6.1.4.1.33.16.7.1.1.6
The ITouch serial number of the function card hardware in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	SerialNumber

slotHardwareRevision		1.3.6.1.4.1.33.16.7.1.1.7
This revision level of the function card hardware in the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotIOCardType		1.3.6.1.4.1.33.16.7.1.1.8
The hardware type of the I/O card in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IOType

slotIOCardSerialNumber		1.3.6.1.4.1.33.16.7.1.1.9
The ITouch serial number of the I/O card in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	SerialNumber

slotIOCardOperStatus		1.3.6.1.4.1.33.16.7.1.1.10
Status of the I/O card relative to the function card in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), mismatch(2), good(3), notApplicable(4)

slotBootstrapFirmwareRevision		1.3.6.1.4.1.33.16.7.1.1.11
The firmware revision level of the bootstrap ROM installed in the system in the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotElementalFirmwareRevision		1.3.6.1.4.1.33.16.7.1.1.12
The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotMemorySize		1.3.6.1.4.1.33.16.7.1.1.13
The number of bytes of memory installed in the system in the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotLedNumber		1.3.6.1.4.1.33.16.7.1.1.14
The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

slotLedStatus		1.3.6.1.4.1.33.16.7.1.1.15
The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceeding to the low-order bit, then to then next byte. On the system hardware, the first LED is at the top, left, front, proceeding left to right, top to bottom, and front to back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..9)

slotBase802Address		1.3.6.1.4.1.33.16.7.1.1.16
Base IEEE 802 global address for the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

slotIpAddress		1.3.6.1.4.1.33.16.7.1.1.17
An internet address to which the system in this slot might respond. May be one of many.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

slotPlus5Status		1.3.6.1.4.1.33.16.7.1.1.18
Status of the +5 volt power to the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), broken(2), good(3)

slotPlus12Status		1.3.6.1.4.1.33.16.7.1.1.19
Status of the +12 volt power to the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), broken(2), good(3)

slotMinus12Status		1.3.6.1.4.1.33.16.7.1.1.20
Status of the -12 volt power to the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), broken(2), good(3)

slotPlus5Watts		1.3.6.1.4.1.33.16.7.1.1.21
Tenths of watts of +5 volt power currently drawn by the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

slotPlus12Watts		1.3.6.1.4.1.33.16.7.1.1.22
Tenths of watts of +12 volt power currently drawn by the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

slotMinus12Watts		1.3.6.1.4.1.33.16.7.1.1.23
Tenths of watts of -12 volt power currently drawn by the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

slotIOCardHardwareVersion		1.3.6.1.4.1.33.16.7.1.1.24
Version number of I/O card in the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotRestoreNVS		1.3.6.1.4.1.33.16.7.1.1.25
Setting to 'execute' causes the non-volatile parameter storage to be restored from an installed memory card. Setting to 'ready' has no effect.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), execute(2)

slotDefaultNVS		1.3.6.1.4.1.33.16.7.1.1.26
Setting to 'execute' causes non-volatile stored parameters to be reset to factory defaults. Setting to 'ready' has no effect.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), execute(2)

slotBootTable		1.3.6.1.4.1.33.16.7.2
A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dumping, paramRequested, paramLoading
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlotBootEntry

slotBootEntry		1.3.6.1.4.1.33.16.7.2.1
Bootstrap status values for a chassis slot.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SlotBootEntry

slotBootIndex		1.3.6.1.4.1.33.16.7.2.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotBootIfIndex		1.3.6.1.4.1.33.16.7.2.1.2
An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotBootNetwork		1.3.6.1.4.1.33.16.7.2.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

slotBootProtocol		1.3.6.1.4.1.33.16.7.2.1.4
The protocol in use for bootstrap operation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), mop(3), xmop(4), rarpTftp(5), bootpTftp(6), tftp(7), local(8), managementBus(9)

slotBoot802Address		1.3.6.1.4.1.33.16.7.2.1.5
IEEE 802 global address in use for bootstrap operation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

slotBootAddressType		1.3.6.1.4.1.33.16.7.2.1.6
The type of network address contained in slotBootAddress.
Status: mandatory	Access: read-only
OBJECT-TYPE
	AddressType

slotBootAddress		1.3.6.1.4.1.33.16.7.2.1.7
The network address the system in the slot is using to identify itself for bootstrap operation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..6)

slotBootServerAddressType		1.3.6.1.4.1.33.16.7.2.1.8
The type of network address contained in slotBootServerAddress.
Status: mandatory	Access: read-only
OBJECT-TYPE
	AddressType

slotBootServerAddress		1.3.6.1.4.1.33.16.7.2.1.9
The network address of the system supplying bootstrap services to the system in the slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..6)

slotBootGatewayAddress		1.3.6.1.4.1.33.16.7.2.1.10
The internet address of the router in use for bootstrap operation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

slotBootFileName		1.3.6.1.4.1.33.16.7.2.1.11
The full name of the file in use for bootstrap operation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

slotBootBlockNumber		1.3.6.1.4.1.33.16.7.2.1.12
The current block number being transferred for bootstrap operation, zero if unknown or not applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

slotBootCrashCode		1.3.6.1.4.1.33.16.7.2.1.13
If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..4)

slotControllerTable		1.3.6.1.4.1.33.16.7.3
A list of controller entries, one for each controller of each type in each slot.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SlotControllerEntry

slotControllerEntry		1.3.6.1.4.1.33.16.7.3.1
Values for a controller.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SlotControllerEntry

slotControllerType		1.3.6.1.4.1.33.16.7.3.1.1
The controller type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	NetworkType

slotControllerIndex		1.3.6.1.4.1.33.16.7.3.1.2
An index value that uniquely identifies a controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

slotControllerNetwork		1.3.6.1.4.1.33.16.7.3.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

powerSupplyTable		1.3.6.1.4.1.33.16.8.1
A list of power supply entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PowerSupplyEntry

powerSupplyEntry		1.3.6.1.4.1.33.16.8.1.1
Values for a chassis power supply.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PowerSupplyEntry

powerSupplyIndex		1.3.6.1.4.1.33.16.8.1.1.1
An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

powerSupplyAdminAction		1.3.6.1.4.1.33.16.8.1.1.2
Control to cause reset of the power supply. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of powerSupplyRedundancyStatus.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), reset(2), resetHold(3)

powerSupplyFirmwareVersion		1.3.6.1.4.1.33.16.8.1.1.3
Version number of power supply firmware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

powerSupplyRedundancyStatus		1.3.6.1.4.1.33.16.8.1.1.4
The current redundancy status of the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), disabled(2), redundant(3), engaged(4)

powerSupplyPlus5Status		1.3.6.1.4.1.33.16.8.1.1.5
Status of the +5 volt power from the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyPlus12Status		1.3.6.1.4.1.33.16.8.1.1.6
Status of the +12 volt power from the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyMinus12Status		1.3.6.1.4.1.33.16.8.1.1.7
Status of the -12 volt power from the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyThermalWarningStatus		1.3.6.1.4.1.33.16.8.1.1.8
The current thermal warning status of the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyThermalShutdownStatus		1.3.6.1.4.1.33.16.8.1.1.9
The current thermal shutdown status of the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyFanStatus		1.3.6.1.4.1.33.16.8.1.1.10
The current status of the power supply's fan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyHardwareInhibitStatus		1.3.6.1.4.1.33.16.8.1.1.11
The current status of the power supply's hardware inhibit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyPlus5History		1.3.6.1.4.1.33.16.8.1.1.12
History of the +5 volt power from the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyPlus12History		1.3.6.1.4.1.33.16.8.1.1.13
History of the +12 volt power from the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyMinus12History		1.3.6.1.4.1.33.16.8.1.1.14
History of the -12 volt power from the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyThermalWarningHistory		1.3.6.1.4.1.33.16.8.1.1.15
The thermal warning history of the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyThermalShutdownHistory		1.3.6.1.4.1.33.16.8.1.1.16
The thermal shutdown history of the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyFanHistory		1.3.6.1.4.1.33.16.8.1.1.17
The status history of the power supply's fan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyHardwareInhibitHistory		1.3.6.1.4.1.33.16.8.1.1.18
The status history of the power supply's hardware inhibit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), good(2), broken(3)

powerSupplyPlus5Volts		1.3.6.1.4.1.33.16.8.1.1.19
In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

powerSupplyPlus12Volts		1.3.6.1.4.1.33.16.8.1.1.20
In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

powerSupplyMinus12Volts		1.3.6.1.4.1.33.16.8.1.1.21
In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

powerSupplyWatts		1.3.6.1.4.1.33.16.8.1.1.22
Watts of power currently drawn from this power supply. A value of 0 indicates unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

powerSupplyWattsMax		1.3.6.1.4.1.33.16.8.1.1.23
Maximum watts of power available from this power supply. A value of 0 indicates unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

powerSupplyChassisWatts		1.3.6.1.4.1.33.16.8.1.1.24
Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

powerSupplyChassisWattsMax		1.3.6.1.4.1.33.16.8.1.1.25
Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

powerSupplyHardwareType		1.3.6.1.4.1.33.16.8.1.1.26
The type of power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ps130(2), bb190(3)

firmwareUpdateTable		1.3.6.1.4.1.33.16.9.1
Table of descriptive and status information concerning the writing of firmware to a target I/O card.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FirmwareUpdateEntry

firmwareUpdateEntry		1.3.6.1.4.1.33.16.9.1.1
An entry in the table concerning the writing of firmware to a target I/O card.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	FirmwareUpdateEntry

firmwareUpdateSlotIndex		1.3.6.1.4.1.33.16.9.1.1.1
This variable identifies the slot to which is to be the target of the firmware update.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

firmwareUpdateDefaultFileName		1.3.6.1.4.1.33.16.9.1.1.2
This variable when read will obtain the default file name from the target.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

firmwareUpdateFileName		1.3.6.1.4.1.33.16.9.1.1.3
This variable contains the name of the file to be read from the flash memory card and written to the target.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

firmwareUpdateStatus		1.3.6.1.4.1.33.16.9.1.1.4
This variable is used to start the update process. The agent always 'ready' for this value. Setting this value to 'execute' causes the agent to write the file specified by firmwareUpdateFileName to be written to the taget. Setting this value to 'execute' when firmwareUpdateFileName has not been written or when firmwareUpdateState is 'writing' causes bad value to be returned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), execute(2)

firmwareUpdateState		1.3.6.1.4.1.33.16.9.1.1.5
This variable indicates the current state of firmware update, 'idle' indicates that firmware update may be initiated, and 'writing' indicates that an update is in process.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), writing(2)

firmwareUpdateCompletionStatus		1.3.6.1.4.1.33.16.9.1.1.6
This variable indicates the completion status of the the last firmware update attempt. 'none' indicates that no firmware update has yet been attempted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), success(2), noTarget(3), busError(4), badFileName(5), targetError(6), timeout(7)

firmwareUpdateMethod		1.3.6.1.4.1.33.16.9.1.1.7
This variable indicates the method of update of the firmware update attempt.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	card(1), local(2)