ISPRO-MIB

File: ISPRO-MIB.mib (54626 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises IpAddress OBJECT-TYPE
DisplayString

Defined Types

IsproEnuEnable  
INTEGER enabled(1), disabled(2)    

IsproEnuReset  
INTEGER reset(1), nothing(2)    

IsproEnuRestart  
INTEGER restart(1), nothing(2)    

IsproEnuSeverity  
INTEGER information(1), warning(2), severe(3)    

IsproEnuAccess  
INTEGER noAccess(1), readonly(2), readwrite(3)    

IsproEnuTempUnit  
INTEGER celsius(1), fahrenheit(2)    

IsproEnuDateFormat  
INTEGER dd-mm-yyyy(1), mm-dd-yyyy(2)    

IsproEnuTimeZone  
INTEGER gMT-1200(1), gMT-1100(2), gMT-1000(3), gMT-0900(4), gMT-0800(5), gMT-0700(6), gMT-0600(7), gMT-0500(8), gMT-0400(9), gMT-0330(10), gMT-0300(11), gMT-0200(12), gMT-0100(13), gMT-0000(14), gMT0100(15), gMT0200(16), gMT0300(17), gMT0330(18), gMT0400(19), gMT0500(20), gMT0530(21), gMT0600(22), gMT0700(23), gMT0800(24), gMT0900(25), gMT1000(26), gMT1100(27), gMT1200(28)    

IsproEnuSensorType  
INTEGER unknown(1), sensorHT(2)    

IsproEnuThresholdStatus  
INTEGER unknown(1), disable(2), normal(3), below-low-warning(4), below-low-critical(5), above-high-warning(6), above-high-critical(7)    

IsproEnuDigitalStatus  
INTEGER active(1), inactive(2)    

IsproTriggerStatus  
INTEGER normal(1), triggered(2)    

IsproEnuSensorState  
INTEGER auto(1), disable(2)    

IsproEnuTempCalibration  
INTEGER temperatureIncrease0Point0(1), temperatureIncrease0Point5(2), temperatureIncrease1Point0(3), temperatureIncrease1Point5(4), temperatureIncrease2Point0(5), temperatureIncrease2Point5(6), temperatureIncrease3Point0(7), temperatureDecrease0Point5(8), temperatureDecrease1Point0(9), temperatureDecrease1Point5(10), temperatureDecrease2Point0(11), temperatureDecrease2Point5(12), temperatureDecrease3Point0(13)    

IsproEnuHumidityCalibration  
INTEGER humidityIncrease0Point0(1), humidityIncrease0Point5(2), humidityIncrease1Point0(3), humidityIncrease1Point5(4), humidityIncrease2Point0(5), humidityIncrease2Point5(6), humidityIncrease3Point0(7), humidityDecrease0Point5(8), humidityDecrease1Point0(9), humidityDecrease1Point5(10), humidityDecrease2Point0(11), humidityDecrease2Point5(12), humidityDecrease3Point0(13)    

IsproEnuAlarmState  
INTEGER disabled(1), normalOpen(2), normalClose(3)    

IsproEnuOnOff  
INTEGER on(1), off(2)    

IsproEnuTurnOnOff  
INTEGER turnOn(1), turnOff(2)    

IsproEnuPresent  
INTEGER present(1), absent(2)    

IsproEnuDO  
INTEGER none(1), digitalOutput1(2), digitalOutput2(3)    

IsproEnuHighLow  
INTEGER high(1), low(2)    

IsproLogType  
INTEGER historyLog(1), extendedLog(2), deviceEventLog(3), systemEventLog(4)    

IsproReceiverEntry  
SEQUENCE    
  isReceiverIndex INTEGER
  isReceiverAddr IpAddress
  isReceiverCommunityString DisplayString
  isReceiverSeverityLevel INTEGER
  isReceiverDescription DisplayString

IsproAccessEntry  
SEQUENCE    
  isAccessIndex INTEGER
  isAccessControlAddr IpAddress
  isAccessCommunityString DisplayString
  isAccessControlMode INTEGER
  isAccessAccount DisplayString

IsproDeviceMonitorTemperatureEntry  
SEQUENCE    
  isDeviceMonitorTemperatureIndex INTEGER
  isDeviceMonitorTemperatureName DisplayString
  isDeviceMonitorTemperature INTEGER
  isDeviceMonitorTemperatureAlarm INTEGER

IsproDeviceMonitorHumidityEntry  
SEQUENCE    
  isDeviceMonitorHumidityIndex INTEGER
  isDeviceMonitorHumidityName DisplayString
  isDeviceMonitorHumidity INTEGER
  isDeviceMonitorHumidityAlarm INTEGER

IsproDeviceMonitorDigitalInEntry  
SEQUENCE    
  isDeviceMonitorDigitalInIndex INTEGER
  isDeviceMonitorDigitalInName DisplayString
  isDeviceMonitorDigitalIn INTEGER
  isDeviceMonitorDigitalInAlarm INTEGER

IsproDeviceConfigEntry  
SEQUENCE    
  isDeviceConfigIndex INTEGER
  isDeviceConfigName DisplayString
  isDeviceConfigState INTEGER
  isDeviceConfigDisplay INTEGER

IsproDeviceConfigTemperatureEntry  
SEQUENCE    
  isDeviceConfigTemperatureIndex INTEGER
  isDeviceConfigTemperatureName DisplayString
  isDeviceConfigTemperatureLowWarning INTEGER
  isDeviceConfigTemperatureLowCritical INTEGER
  isDeviceConfigTemperatureHighWarning INTEGER
  isDeviceConfigTemperatureHighCritical INTEGER
  isDeviceConfigTemperatureHysteresis INTEGER
  isDeviceConfigTemperatureCalibration INTEGER
  isDeviceConfigTemperatureLowWarningState INTEGER
  isDeviceConfigTemperatureLowCriticalState INTEGER
  isDeviceConfigTemperatureHighWarningState INTEGER
  isDeviceConfigTemperatureHighCriticalState INTEGER
  isDeviceConfigTemperatureEventDO INTEGER

IsproDeviceConfigHumidityEntry  
SEQUENCE    
  isDeviceConfigHumidityIndex INTEGER
  isDeviceConfigHumidityName DisplayString
  isDeviceConfigHumidityLowWarning INTEGER
  isDeviceConfigHumidityLowCritical INTEGER
  isDeviceConfigHumidityHighWarning INTEGER
  isDeviceConfigHumidityHighCritical INTEGER
  isDeviceConfigHumidityHysteresis INTEGER
  isDeviceConfigHumidityCalibration INTEGER
  isDeviceConfigHumidityLowWarningState INTEGER
  isDeviceConfigHumidityLowCriticalState INTEGER
  isDeviceConfigHumidityHighWarningState INTEGER
  isDeviceConfigHumidityHighCriticalState INTEGER
  isDeviceConfigHumidityEventDO INTEGER

IsproDeviceConfigDigitalInEntry  
SEQUENCE    
  isDeviceConfigDigitalInIndex INTEGER
  isDeviceConfigDigitalInName DisplayString
  isDeviceConfigDigitalInState INTEGER
  isDeviceConfigDigitalInHysteresis INTEGER
  isDeviceConfigDigitalInEventDO INTEGER

IsproDeviceDigitalOutEntry  
SEQUENCE    
  isDeviceDigitalOutIndex INTEGER
  isDeviceDigitalOutStartState INTEGER
  isDeviceDigitalOutEventAction INTEGER
  isDeviceDigitalOutManualControl INTEGER

Defined Values

jacarta 1.3.6.1.4.1.19011
OBJECT IDENTIFIER    

product 1.3.6.1.4.1.19011.1
OBJECT IDENTIFIER    

webAppliance 1.3.6.1.4.1.19011.1.3
OBJECT IDENTIFIER    

ispro 1.3.6.1.4.1.19011.1.3.2
OBJECT IDENTIFIER    

isObjects 1.3.6.1.4.1.19011.1.3.2.1
OBJECT IDENTIFIER    

isTraps 1.3.6.1.4.1.19011.1.3.2.2
OBJECT IDENTIFIER    

isIdent 1.3.6.1.4.1.19011.1.3.2.1.1
OBJECT IDENTIFIER    

isConfig 1.3.6.1.4.1.19011.1.3.2.1.2
OBJECT IDENTIFIER    

isDevice 1.3.6.1.4.1.19011.1.3.2.1.3
OBJECT IDENTIFIER    

isDeviceMonitor 1.3.6.1.4.1.19011.1.3.2.1.3.1
OBJECT IDENTIFIER    

isDeviceConfig 1.3.6.1.4.1.19011.1.3.2.1.3.2
OBJECT IDENTIFIER    

isIdentManufacturer 1.3.6.1.4.1.19011.1.3.2.1.1.1
The name of the ispro manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

isIdentModel 1.3.6.1.4.1.19011.1.3.2.1.1.2
The ispro Model designation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

isIdentAgentSoftwareVersion 1.3.6.1.4.1.19011.1.3.2.1.1.3
The ispro software/firmware version. This variable may or may not have the same value as upsIdentUPSSoftwareVersion in some implementations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

isIdentName 1.3.6.1.4.1.19011.1.3.2.1.1.4
A string identifying the ispro. This object should be set by the administrator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

isConfigMibVersion 1.3.6.1.4.1.19011.1.3.2.1.2.1
The version of MIB spec.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

isConfigNetwork 1.3.6.1.4.1.19011.1.3.2.1.2.2
OBJECT IDENTIFIER    

isConfigIpAddress 1.3.6.1.4.1.19011.1.3.2.1.2.2.1
The ip address that NMS can identify the managed device
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

isConfigGateway 1.3.6.1.4.1.19011.1.3.2.1.2.2.2
The default gateway that allow device managed through routers
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

isConfigSubnetMask 1.3.6.1.4.1.19011.1.3.2.1.2.2.3
Internet address subnet mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

isConfigDateTime 1.3.6.1.4.1.19011.1.3.2.1.2.3
OBJECT IDENTIFIER    

isConfigDate 1.3.6.1.4.1.19011.1.3.2.1.2.3.1
The date in ispro, format ask the Date Format of references
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

isConfigTime 1.3.6.1.4.1.19011.1.3.2.1.2.3.2
The time of ispro, format is (hh:mm:ss)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

isConfigTimeFromNtp 1.3.6.1.4.1.19011.1.3.2.1.2.3.3
Enable/disable update date/time from NTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigNtpIpAddress 1.3.6.1.4.1.19011.1.3.2.1.2.3.4
NTP IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

isConfigNtpTimeZone 1.3.6.1.4.1.19011.1.3.2.1.2.3.5
Configure the time zone of ispro to access NTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuTimeZone  

isConfigDayLightSaving 1.3.6.1.4.1.19011.1.3.2.1.2.3.6
Enable/disable daylight saving for NTP time, if enabled, the time get from NTP will be set set one hour in advance to reflect daylight saving status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigLog 1.3.6.1.4.1.19011.1.3.2.1.2.4
OBJECT IDENTIFIER    

isConfigHistoryLogFrequency 1.3.6.1.4.1.19011.1.3.2.1.2.4.1
The frequency of the history log updates. The value is in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..3600  

isConfigExtHistoryLogFrequency 1.3.6.1.4.1.19011.1.3.2.1.2.4.2
The frequency of the extended history log updates. The value is in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..720  

isConfigConfigurationLog 1.3.6.1.4.1.19011.1.3.2.1.2.4.3
Enable/disable ispro to log parameters change.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigLogType 1.3.6.1.4.1.19011.1.3.2.1.2.4.4
The type of log in agent
Status: mandatory Access: read-only
OBJECT-TYPE    
  IsproLogType  

isConfigDhcpState 1.3.6.1.4.1.19011.1.3.2.1.2.5
Enable or disable DHCP/BootP capability
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigPingState 1.3.6.1.4.1.19011.1.3.2.1.2.6
Enable or disable Ping Echo capability
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigTftpState 1.3.6.1.4.1.19011.1.3.2.1.2.7
Enable or disable TFTP network upgrade capability
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigTelnet 1.3.6.1.4.1.19011.1.3.2.1.2.8
OBJECT IDENTIFIER    

isConfigTelnetState 1.3.6.1.4.1.19011.1.3.2.1.2.8.1
Enable or disable telnet access
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigTelnetPortNumber 1.3.6.1.4.1.19011.1.3.2.1.2.8.2
Setting the server port of telnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

isConfigHttp 1.3.6.1.4.1.19011.1.3.2.1.2.9
OBJECT IDENTIFIER    

isConfigHttpState 1.3.6.1.4.1.19011.1.3.2.1.2.9.1
Enable or disable HTTP access
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigHttpPortNumber 1.3.6.1.4.1.19011.1.3.2.1.2.9.2
Setting the server port of HTTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

isConfigHttpSecurity 1.3.6.1.4.1.19011.1.3.2.1.2.9.3
Enable/disable HTTP access for read-only users
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigSnmp 1.3.6.1.4.1.19011.1.3.2.1.2.10
OBJECT IDENTIFIER    

isConfigSnmpState 1.3.6.1.4.1.19011.1.3.2.1.2.10.1
Enable or disable SNMP access
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isConfigSnmpPortNumber 1.3.6.1.4.1.19011.1.3.2.1.2.10.2
Setting the server port of SNMP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

isConfigControl 1.3.6.1.4.1.19011.1.3.2.1.2.11
OBJECT IDENTIFIER    

isConfigResetToDefault 1.3.6.1.4.1.19011.1.3.2.1.2.11.1
Reset all parameters of ispro to default value
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuReset  

isConfigRestart 1.3.6.1.4.1.19011.1.3.2.1.2.11.2
Restart ispro
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuRestart  

isConfigTrap 1.3.6.1.4.1.19011.1.3.2.1.2.12
OBJECT IDENTIFIER    

isConfigTrapRetryCount 1.3.6.1.4.1.19011.1.3.2.1.2.12.1
The count of repeat traps to send to NMS before trap acknowledge received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

isConfigTrapRetryTime 1.3.6.1.4.1.19011.1.3.2.1.2.12.2
The time between retry traps send to NMS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

isConfigTrapAckSignature 1.3.6.1.4.1.19011.1.3.2.1.2.12.3
The signature of trap acknowledge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

isConfigRefreshRate 1.3.6.1.4.1.19011.1.3.2.1.2.13
The frequency that ispro refresh web page from agent (unit : second).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

isConfigTrapReceiverTable 1.3.6.1.4.1.19011.1.3.2.1.2.14
A list of managers to send traps to. The number of entries is given by the value of isConfigNumTrapReceivers
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproReceiverEntry

isConfigTrapReceiverEntry 1.3.6.1.4.1.19011.1.3.2.1.2.14.1
The managers to send traps to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproReceiverEntry  

isReceiverIndex 1.3.6.1.4.1.19011.1.3.2.1.2.14.1.1
The index to a trap receiver entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

isReceiverAddr 1.3.6.1.4.1.19011.1.3.2.1.2.14.1.2
The IP address of the manager to send a trap to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

isReceiverCommunityString 1.3.6.1.4.1.19011.1.3.2.1.2.14.1.3
The community name to use in the trap when sent to the manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..19)  

isReceiverSeverityLevel 1.3.6.1.4.1.19011.1.3.2.1.2.14.1.4
The severity level of traps to be received by this manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuSeverity  

isReceiverDescription 1.3.6.1.4.1.19011.1.3.2.1.2.14.1.5
Description of trap receivers
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..24)  

isConfigAccessControlTable 1.3.6.1.4.1.19011.1.3.2.1.2.15
A list of managers which can access ispro with private community string.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproAccessEntry

isConfigAccessControlEntry 1.3.6.1.4.1.19011.1.3.2.1.2.15.1
The managers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproAccessEntry  

isAccessIndex 1.3.6.1.4.1.19011.1.3.2.1.2.15.1.1
The index to an access control entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

isAccessControlAddr 1.3.6.1.4.1.19011.1.3.2.1.2.15.1.2
The IP address of the manager to access ispro
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

isAccessCommunityString 1.3.6.1.4.1.19011.1.3.2.1.2.15.1.3
The community name to use in the manager when access ispro
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

isAccessControlMode 1.3.6.1.4.1.19011.1.3.2.1.2.15.1.4
Access type, only read/Write access type can change parameter of ispro
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuAccess  

isAccessAccount 1.3.6.1.4.1.19011.1.3.2.1.2.15.1.5
Access account, the account for web login to access ispro
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

isConfigTemperatureUnit 1.3.6.1.4.1.19011.1.3.2.1.2.16
The temperature unit of the system, can be Celsius or Fahrenheit
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuTempUnit  

isConfigDateFormat 1.3.6.1.4.1.19011.1.3.2.1.2.17
The date format of the system, can be dd/mm/yyyy or mm/dd/yyyy
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuDateFormat  

isDeviceMonitorTemperatureTable 1.3.6.1.4.1.19011.1.3.2.1.3.1.1
The temperature monitoring table, to provides overall status of temperature.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproDeviceMonitorTemperatureEntry

isDeviceMonitorTemperatureEntry 1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1
The temperature monitoring table, to provides overall status of temperature.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproDeviceMonitorTemperatureEntry  

isDeviceMonitorTemperatureIndex 1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.1
The index to a temperature entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

isDeviceMonitorTemperatureName 1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.2
The temperature sensor name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

isDeviceMonitorTemperature 1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.3
The temperature of sensor on device Ispro, the unit is 0.01 degree.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isDeviceMonitorTemperatureAlarm 1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.4
The status of temperature sensor in Ispro.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IsproEnuThresholdStatus  

isDeviceMonitorHumidityTable 1.3.6.1.4.1.19011.1.3.2.1.3.1.2
The humidity monitoring table, to provides overall status of humidity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproDeviceMonitorHumidityEntry

isDeviceMonitorHumidityEntry 1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1
The humidity monitoring table, to provides overall status of humidity.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproDeviceMonitorHumidityEntry  

isDeviceMonitorHumidityIndex 1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1.1
The index to a humidity entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

isDeviceMonitorHumidityName 1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1.2
The humidity sensor name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

isDeviceMonitorHumidity 1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1.3
The humidity of sensor on device Ispro, the unit is 0.01 %.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isDeviceMonitorHumidityAlarm 1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1.4
The status of humidity sensor in Ispro.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IsproEnuThresholdStatus  

isDeviceMonitorDigitalInTable 1.3.6.1.4.1.19011.1.3.2.1.3.1.3
The digital input monitoring table, to provides overall status of digital input.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproDeviceMonitorDigitalInEntry

isDeviceMonitorDigitalInEntry 1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1
The digital input monitoring table, to provides overall status of digital input.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproDeviceMonitorDigitalInEntry  

isDeviceMonitorDigitalInIndex 1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1.1
The index to a digital input entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

isDeviceMonitorDigitalInName 1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1.2
The digital input sensor name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

isDeviceMonitorDigitalIn 1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1.3
The digital input of sensor on device Ispro.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IsproEnuDigitalStatus  

isDeviceMonitorDigitalInAlarm 1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1.4
The status of digital alarm sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IsproTriggerStatus  

isDeviceConfigTable 1.3.6.1.4.1.19011.1.3.2.1.3.2.1
The device configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproDeviceConfigEntry

isDeviceConfigEntry 1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1
The device configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproDeviceConfigEntry  

isDeviceConfigIndex 1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1.1
The index to a sensor entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

isDeviceConfigName 1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1.2
The name of sensor device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

isDeviceConfigState 1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1.3
The setup of device type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuSensorState  

isDeviceConfigDisplay 1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1.4
Enable or disable of displaying this sensor in Comprehensive webpage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigTemperatureTable 1.3.6.1.4.1.19011.1.3.2.1.3.2.2
The temperature configuration table of Device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproDeviceConfigTemperatureEntry

isDeviceConfigTemperatureEntry 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1
The sensor configuration table of Device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproDeviceConfigTemperatureEntry  

isDeviceConfigTemperatureIndex 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.1
The index to a temperature device entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

isDeviceConfigTemperatureName 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.2
The temperature sensor name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

isDeviceConfigTemperatureLowWarning 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.3
The set point to trigger low warning alarm. the unit is 0.01 degree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1500..6500  

isDeviceConfigTemperatureLowCritical 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.4
The threshold to trigger low critical alarm. the unit is 0.01 degree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1500..6500  

isDeviceConfigTemperatureHighWarning 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.5
The threshold to trigger high warning alarm. the unit is 0.01 degree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1500..6500  

isDeviceConfigTemperatureHighCritical 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.6
The threshold to trigger high critical alarm. the unit is 0.01 degree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1500..6500  

isDeviceConfigTemperatureHysteresis 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.7
The set value to prevent too many alarms when temperature is hovering around the set threshold. The unit is 0.01
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isDeviceConfigTemperatureCalibration 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.8
The set value to get the correct temperature according to your reference temperature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuTempCalibration  

isDeviceConfigTemperatureLowWarningState 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.9
Enable/disable the set point to trigger low warning alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigTemperatureLowCriticalState 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.10
Enable/disable the set point to trigger low critical alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigTemperatureHighWarningState 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.11
Enable/disable the set point to trigger high warning alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigTemperatureHighCriticalState 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.12
Enable/disable the set point to trigger high critical alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigTemperatureEventDO 1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.13
Set the trigger action of temperature events. If event asserted, this will invert the digital output #1 or #2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuDO  

isDeviceConfigHumidityTable 1.3.6.1.4.1.19011.1.3.2.1.3.2.3
The humidity configuration table of Device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproDeviceConfigHumidityEntry

isDeviceConfigHumidityEntry 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1
The humidity configuration table of Device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproDeviceConfigHumidityEntry  

isDeviceConfigHumidityIndex 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.1
The index to a humidity device entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

isDeviceConfigHumidityName 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.2
The humidity sensor name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

isDeviceConfigHumidityLowWarning 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.3
The set point to trigger low warning alarm. the unit is 0.01 %.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 500..9500  

isDeviceConfigHumidityLowCritical 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.4
The threshold to trigger low critical alarm. the unit is 0.01 %.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 500..9500  

isDeviceConfigHumidityHighWarning 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.5
The threshold to trigger high warning alarm. the unit is 0.01 %.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 500..9500  

isDeviceConfigHumidityHighCritical 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.6
The threshold to trigger high critical alarm. the unit is 0.01 %.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 500..9500  

isDeviceConfigHumidityHysteresis 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.7
The set value to prevent too many alarms when Humidity is hovering around the set threshold. The unit is 0.01
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isDeviceConfigHumidityCalibration 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.8
The set value to get the correct temperature according to your reference temperature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuHumidityCalibration  

isDeviceConfigHumidityLowWarningState 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.9
Enable/disable the set point to trigger low warning alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigHumidityLowCriticalState 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.10
Enable/disable the set point to trigger low critical alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigHumidityHighWarningState 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.11
Enable/disable the set point to trigger high warning alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigHumidityHighCriticalState 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.12
Enable/disable the set point to trigger high critical alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceConfigHumidityEventDO 1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.13
Set the trigger action of humidity events. If event asserted, this will invert the digital output #1 or #2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuDO  

isDeviceConfigDigitalInTable 1.3.6.1.4.1.19011.1.3.2.1.3.2.4
The digital input configuration table of Device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproDeviceConfigDigitalInEntry

isDeviceConfigDigitalInEntry 1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1
The digital input configuration table of Device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproDeviceConfigDigitalInEntry  

isDeviceConfigDigitalInIndex 1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.1
The index to a digital input device entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

isDeviceConfigDigitalInName 1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.2
The name of digital input.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

isDeviceConfigDigitalInState 1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.3
Setup the signal type to trigger alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuAlarmState  

isDeviceConfigDigitalInHysteresis 1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.4
The set value to delay the alarm triggered when event occurs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isDeviceConfigDigitalInEventDO 1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.5
Set the trigger action of digital alarm #1 events. If event asserted, this will invert the digital output #1 or #2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuDO  

isDeviceDigitalOutTable 1.3.6.1.4.1.19011.1.3.2.1.3.2.5
The configuration table of Device digital output.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsproDeviceDigitalOutEntry

isDeviceID 1.3.6.1.4.1.19011.1.3.2.1.3.3
The device board id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

isDeviceDigitalOutEntry 1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1
The configuration table of Device digital output.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsproDeviceDigitalOutEntry  

isDeviceDigitalOutIndex 1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1.1
The index is 1 and 2, it maps to digital output 1 and 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

isDeviceDigitalOutStartState 1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1.2
Turn power on/off specific digital output when system start up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuOnOff  

isDeviceDigitalOutEventAction 1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1.3
If select yes, it will invert the current status of specific digital output when Ispro event occurred.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuEnable  

isDeviceDigitalOutManualControl 1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1.4
Invert current status of specific digital output manually.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IsproEnuTurnOnOff  

isTrapsDescription 1.3.6.1.4.1.19011.1.3.2.2.1
The description of current trap
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor