IPADv2-MIB

File: IPADv2-MIB.mib (195964 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC DS8200v2-MIB
DS8200v2-TC-MIB

Imported symbols

enterprises IpAddress TimeTicks
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
DisplayString serialDteDTRAlarmStatus t1e1ESCount
t1e1SESCount t1e1LOSSCount t1e1UASCount
t1e1CSSCount t1e1BPVSCount t1e1OOFSCount
t1e1AISCount t1e1RASCount ddsNetLOSCount
ddsNetOOFCount ddsNetOOSCount ddsNetFDLCount
ddsNetBPVCount hbu verilink

Defined Types

IpadFrPortTableEntry  
SEQUENCE    
  ipadFrPortService INTEGER
  ipadFrPortActive INTEGER
  ipadFrPortLMIType INTEGER
  ipadFrPortLMIMode INTEGER
  ipadFrPortRxInvAlmThreshold INTEGER
  ipadFrPortRxInvAlmAlarm INTEGER
  ipadFrPortTxAlmThreshold INTEGER
  ipadFrPortTxAlmAlarm INTEGER
  ipadFrPortRxAlmThreshold INTEGER
  ipadFrPortRxAlmAlarm INTEGER
  ipadFrPortAlarmReset INTEGER

IpadServiceTableEntry  
SEQUENCE    
  ipadServiceIndex INTEGER
  ipadServiceifIndex INTEGER
  ipadServiceType INTEGER
  ipadServicePair INTEGER
  ipadServiceStatus INTEGER

IpadChannelTableEntry  
SEQUENCE    
  ipadChannelifIndex INTEGER
  ipadChannelIndex INTEGER
  ipadChannelService INTEGER
  ipadChannelPair INTEGER
  ipadChannelRate INTEGER
  ipadChannelIdlePattern INTEGER

IpadDLCITableEntry  
SEQUENCE    
  ipadDLCIservice INTEGER
  ipadDLCInumber INTEGER
  ipadDLCIactive INTEGER
  ipadDLCIcongestion INTEGER
  ipadDLCIremote INTEGER
  ipadDLCIremoteUnit DisplayString
  ipadDLCIremoteEquipActive INTEGER
  ipadDLCIencapsulation INTEGER
  ipadDLCIproprietary INTEGER
  ipadDLCIpropOffset INTEGER
  ipadDLCIinBand INTEGER
  ipadDLCICIR INTEGER
  ipadDLCIBe INTEGER
  ipadDLCIminBC INTEGER
  ipadDLCIrxMon INTEGER
  ipadDLCIdEctrl INTEGER
  ipadDLCIenableDelay INTEGER
  ipadDLCItxExCIRThreshold INTEGER
  ipadDLCItxExCIRAlarm INTEGER
  ipadDLCItxExBeThreshold INTEGER
  ipadDLCItxExBeAlarm INTEGER
  ipadDLCIrxCongThreshold INTEGER
  ipadDLCIrxCongAlarm INTEGER
  ipadDLCIrxBECNinCIR INTEGER
  ipadDLCIUASThreshold INTEGER
  ipadDLCIUASAlarm INTEGER
  ipadDLCIAlarmReset INTEGER
  ipadDLCIRoundTripDelaySize INTEGER
  ipadDLCIRoundTripDelayRate INTEGER
  ipadDLCIRemoteFramesOfferedWithinCIR INTEGER
  ipadDLCIRemoteFramesOfferedWithinBE INTEGER
  ipadDLCIFramesReceived INTEGER
  ipadDLCIRemoteDataOfferedWithinCIR INTEGER
  ipadDLCIRemoteDataOfferedWithinBE INTEGER
  ipadDLCIDataReceived INTEGER
  ipadDLCIRemoteIPAddress IpAddress
  ipadDLCICompressionStatus INTEGER
  ipadDLCICompressionTxOctetsIn INTEGER
  ipadDLCICompressionTxOctetsOut INTEGER
  ipadDLCICompressionRxOctetsIn INTEGER
  ipadDLCICompressionRxOctetsOut INTEGER

IpadEndpointTableEntry  
SEQUENCE    
  ipadEndpointIndex INTEGER
  ipadEndpointName DisplayString
  ipadEndpointService INTEGER
  ipadEndpointDLCInumber INTEGER
  ipadEndpointType INTEGER
  ipadEndpointForward INTEGER
  ipadEndpointBackup INTEGER
  ipadEndpointRefSLP INTEGER
  ipadEndpointRemoteIpAddr IpAddress
  ipadEndpointRemoteIpMask IpAddress

IpadUserTableEntry  
SEQUENCE    
  ipadUserIndex INTEGER
  ipadUserFilterByDLCI INTEGER
  ipadUserService INTEGER
  ipadUserDLCI INTEGER
  ipadUserFilterByIPAddress INTEGER
  ipadUserIPAddress IpAddress
  ipadUserIPMask IpAddress
  ipadUserFilterByIPPort INTEGER
  ipadUserIPPort INTEGER
  ipadUserTxAlmThreshold INTEGER
  ipadUserTxAlmAlarm INTEGER
  ipadUserAlarmReset INTEGER
  ipadUserVpi INTEGER
  ipadUserVci INTEGER
  ipadUserFilterByVpiVci INTEGER

IpadPPPCfgTableEntry  
SEQUENCE    
  ipadPPPCfgService INTEGER
  ipadPPPCfgDialMode INTEGER
  ipadPPPCfgInactivityTimer INTEGER
  ipadPPPCfgNegotiationInit INTEGER
  ipadPPPCfgMRU INTEGER
  ipadPPPCfgACCM INTEGER
  ipadPPPCfgNegMRU INTEGER
  ipadPPPCfgNegACCM INTEGER
  ipadPPPCfgNegMagic INTEGER
  ipadPPPCfgNegCompression INTEGER
  ipadPPPCfgNegAddress INTEGER
  ipadPPPCfgNegPAP INTEGER
  ipadPPPCfgNegCHAP INTEGER
  ipadPPPCfgAllowPAP INTEGER
  ipadPPPCfgAllowCHAP INTEGER
  ipadPPPCfgPAPUsername DisplayString
  ipadPPPCfgPAPPassword DisplayString
  ipadPPPCfgCHAPUsername DisplayString
  ipadPPPCfgCHAPSecret DisplayString
  ipadPPPCfgPortIpAddress IpAddress
  ipadPPPCfgPeerIpAddress IpAddress
  ipadPPPCfgNegIpAddress INTEGER
  ipadPPPCfgNegIPCPCompression INTEGER
  ipadPPPCfgSubnetMask IpAddress
  ipadPPPCfgAuthChallengeInterval INTEGER
  ipadPPPCfgEndpoint DisplayString
  ipadPPPCfgNegIpMask INTEGER
  ipadPPPCfgNegDNSAddress INTEGER

IpadPPPPAPTableEntry  
SEQUENCE    
  ipadPPPPAPTableIndex INTEGER
  ipadPPPPAPTableUsername DisplayString
  ipadPPPPAPTablePassword DisplayString

IpadPPPCHAPTableEntry  
SEQUENCE    
  ipadPPPCHAPTableIndex INTEGER
  ipadPPPCHAPTableUsername DisplayString
  ipadPPPCHAPTableSecret DisplayString

IpadModemDialTableEntry  
SEQUENCE    
  ipadModemDialTableIndex INTEGER
  ipadModemDialDataIndex INTEGER
  ipadModemDialNumber DisplayString
  ipadModemDialAbortTimer INTEGER
  ipadModemDialRedialAttempts INTEGER
  ipadModemDialDelayBeforeRedial INTEGER
  ipadModemDialLoginScript DisplayString
  ipadModemDialUsername DisplayString
  ipadModemDialPassword DisplayString
  ipadModemDialChallengeScript DisplayString
  ipadModemDialAnswerRings INTEGER
  ipadModemDialCommand INTEGER
  ipadModemDialStatus INTEGER
  ipadModemDialSecurity INTEGER
  ipadModemDialCallbackRedialDelay INTEGER
  ipadModemDialCallbackTimeout INTEGER
  ipadModemDialCallbackChalScript DisplayString
  ipadModemDialCallbackRspScript DisplayString

IpadModemDataTableEntry  
SEQUENCE    
  ipadModemDataTableIndex INTEGER
  ipadModemDataModemName DisplayString
  ipadModemDataSetupScript DisplayString
  ipadModemDataDialingScript DisplayString
  ipadModemDataAnswerScript DisplayString
  ipadModemDataHangupScript DisplayString
  ipadModemDataSyncScript DisplayString
  ipadModemDataSyncMethod INTEGER
  ipadModemDataSetupScript2 DisplayString
  ipadModemDataSetupScript3 DisplayString
  ipadModemDataSetupScript4 DisplayString
  ipadModemDataSetupScript5 DisplayString

IpadDbuTableEntry  
SEQUENCE    
  ipadDbuIndex INTEGER
  ipadDbuOperation INTEGER
  ipadDbuMonitoredifIndex INTEGER
  ipadDbuActivator1 INTEGER
  ipadDbuActivator2 INTEGER
  ipadDbuRevertDelay INTEGER
  ipadDbuTrapDelay INTEGER
  ipadDbuStatus INTEGER
  ipadDbuTrap INTEGER

IpadDbuDailyTableEntry  
SEQUENCE    
  ipadDbuDailyIndex INTEGER
  ipadDbuDailyDayOfWeek INTEGER
  ipadDbuDailyStart INTEGER
  ipadDbuDailyLength INTEGER

IpadFrPortStatsEntry  
SEQUENCE    
  ipadFrPortStatsService INTEGER
  ipadFrPortStatsPeriod INTEGER
  ipadFrPortStatsTxFrames INTEGER
  ipadFrPortStatsRxFrames INTEGER
  ipadFrPortStatsTxOctets INTEGER
  ipadFrPortStatsRxOctets INTEGER
  ipadFrPortStatsTxMgmtFrames INTEGER
  ipadFrPortStatsRxMgmtFrames INTEGER
  ipadFrPortStatsTxMgmtOctets INTEGER
  ipadFrPortStatsRxMgmtOctets INTEGER
  ipadFrPortStatsRxFECN INTEGER
  ipadFrPortStatsRxBECN INTEGER
  ipadFrPortStatsRxInvalid INTEGER
  ipadFrPortStatsTxStatInq INTEGER
  ipadFrPortStatsRxStatInq INTEGER
  ipadFrPortStatsTxStatResp INTEGER
  ipadFrPortStatsRxStatResp INTEGER
  ipadFrPortStatsRxInvLMI INTEGER
  ipadFrPortStatsPeak INTEGER
  ipadFrPortStatsAverage INTEGER
  ipadFrPortStatsTimeStamp TimeTicks
  ipadFrPortStatsTxAvgPercent INTEGER
  ipadFrPortStatsTxMaxPercent INTEGER
  ipadFrPortStatsTxInstantPercent INTEGER
  ipadFrPortStatsTx20PercentSec INTEGER
  ipadFrPortStatsTx40PercentSec INTEGER
  ipadFrPortStatsTx60PercentSec INTEGER
  ipadFrPortStatsTx80PercentSec INTEGER
  ipadFrPortStatsTx100PercentSec INTEGER
  ipadFrPortStatsRxAvgPercent INTEGER
  ipadFrPortStatsRxMaxPercent INTEGER
  ipadFrPortStatsRxInstantPercent INTEGER
  ipadFrPortStatsRx20PercentSec INTEGER
  ipadFrPortStatsRx40PercentSec INTEGER
  ipadFrPortStatsRx60PercentSec INTEGER
  ipadFrPortStatsRx80PercentSec INTEGER
  ipadFrPortStatsRx100PercentSec INTEGER
  ipadFrPortStatsValidIntervals INTEGER

IpadDLCIstatsEntry  
SEQUENCE    
  ipadDLCIstatsService INTEGER
  ipadDLCIstatsDLCI INTEGER
  ipadDLCIstatsPeriod INTEGER
  ipadDLCIstatsTxFrames INTEGER
  ipadDLCIstatsRxFrames INTEGER
  ipadDLCIstatsTxOctets INTEGER
  ipadDLCIstatsRxOctets INTEGER
  ipadDLCIstatsRxFECN INTEGER
  ipadDLCIstatsRxBECN INTEGER
  ipadDLCIstatsRxDE INTEGER
  ipadDLCIstatsTxExcessCIR INTEGER
  ipadDLCIstatsTxExcessBe INTEGER
  ipadDLCIstatsTxMgmtFrames INTEGER
  ipadDLCIstatsRxMgmtFrames INTEGER
  ipadDLCIstatsTxMgmtOctets INTEGER
  ipadDLCIstatsRxMgmtOctets INTEGER
  ipadDLCIstatsPeak INTEGER
  ipadDLCIstatsAverage INTEGER
  ipadDLCIstatsDelayPeak INTEGER
  ipadDLCIstatsDelayAverage INTEGER
  ipadDLCIstatsRoundTripTimeouts INTEGER
  ipadDLCIstatsUAS INTEGER
  ipadDLCIstatsFdrCir INTEGER
  ipadDLCIstatsDdrCir INTEGER
  ipadDLCIstatsFdrBe INTEGER
  ipadDLCIstatsDdrBe INTEGER
  ipadDLCIstatsTimeStamp TimeTicks
  ipadDLCIstatsRemoteFramesOfferedWithinCIR INTEGER
  ipadDLCIstatsRemoteFramesOfferedWithinBE INTEGER
  ipadDLCIstatsFramesReceived INTEGER
  ipadDLCIstatsFDRCIR DisplayString
  ipadDLCIstatsFDRBE DisplayString
  ipadDLCIstatsRemoteDataOfferedWithinCIR INTEGER
  ipadDLCIstatsRemoteDataOfferedWithinBE INTEGER
  ipadDLCIstatsDataReceived INTEGER
  ipadDLCIstatsDDRCIR DisplayString
  ipadDLCIstatsDDRBE DisplayString
  ipadDLCIstatsAvgPercent INTEGER
  ipadDLCIstatsMaxPercent INTEGER
  ipadDLCIstatsInstantPercent INTEGER
  ipadDLCIstats20PercentSec INTEGER
  ipadDLCIstats40PercentSec INTEGER
  ipadDLCIstats60PercentSec INTEGER
  ipadDLCIstats80PercentSec INTEGER
  ipadDLCIstats100PercentSec INTEGER
  ipadDLCIstatsValidIntervals INTEGER
  ipadDLCIstatsCompressionTxOctetsIn INTEGER
  ipadDLCIstatsCompressionTxOctetsOut INTEGER
  ipadDLCIstatsCompressionRxOctetsIn INTEGER
  ipadDLCIstatsCompressionRxOctetsOut INTEGER
  ipadDLCIstatsCompressionTxRatio DisplayString
  ipadDLCIstatsCompressionRxRatio DisplayString

IpadUserStatsEntry  
SEQUENCE    
  ipadUserStatsIndex INTEGER
  ipadUserStatsPeriod INTEGER
  ipadUserStatsTxFrames INTEGER
  ipadUserStatsRxFrames INTEGER
  ipadUserStatsTxOctets INTEGER
  ipadUserStatsRxOctets INTEGER
  ipadUserStatsTxRatePeak INTEGER
  ipadUserStatsTxRateAverage INTEGER
  ipadUserStatsTimeStamp TimeTicks

IpadIPTopNStatsEntry  
SEQUENCE    
  ipadIPTopNStatsIndex INTEGER
  ipadIPTopNStatsAddress OCTET STRING
  ipadIPTopNStatsTimestamp TimeTicks
  ipadIPTopNStatsRxFrames INTEGER
  ipadIPTopNStatsRxOctets INTEGER
  ipadIPTopNStatsTxFrames INTEGER
  ipadIPTopNStatsTxOctets INTEGER

IpadPktSwCfgTableEntry  
SEQUENCE    
  ipadPktSwCfgService INTEGER
  ipadPktSwCfgInterfaceType INTEGER
  ipadPktSwCfgLnkMgmtType INTEGER
  ipadPktSwCfgMaxFrameSize INTEGER
  ipadPktSwCfgnN1 INTEGER
  ipadPktSwCfgnN2 INTEGER
  ipadPktSwCfgnN3 INTEGER
  ipadPktSwCfgnT1 INTEGER
  ipadPktSwCfgDefCIR INTEGER
  ipadPktSwCfgDefExBurst INTEGER
  ipadPktSwCfgCIREE INTEGER
  ipadPktSwCfgLinkInjection INTEGER
  ipadPktSwCfgAutoDiagnostic INTEGER
  ipadPktSwCfgAutoDiscovery INTEGER
  ipadPktSwCfgMgmtDLCI INTEGER
  ipadPktSwCfgRoundTripDelaySize INTEGER
  ipadPktSwCfgRoundTripDelayRate INTEGER
  ipadPktSwCfgAutoIPMgmtAddr INTEGER
  ipadPktSwCfgNormalTxQueueSize INTEGER
  ipadPktSwCfgAddDLCI INTEGER
  ipadPktSwCfgDeleteDLCI INTEGER

IpadTrapDestTableEntry  
SEQUENCE    
  ipadTrapDestIndex INTEGER
  ipadTrapDestination IpAddress

IpadMiscPortSettingsEntry  
SEQUENCE    
  ipadMiscPortSettingsIndex INTEGER
  ipadMiscPortSettingsSerialType INTEGER
  ipadMiscPortSettingsModemControl INTEGER

IpadMiscShdslConfigEntry  
SEQUENCE    
  ipadMiscShdslConfigIndex INTEGER
  ipadMiscShdslTerminalType INTEGER
  ipadMiscShdslTiming INTEGER
  ipadMiscShdslStationInTiming INTEGER
  ipadMiscShdslStationTimingNxMultiple INTEGER
  ipadMiscShdslAutomaticRetrain INTEGER

IpadMiscShdslStatusEntry  
SEQUENCE    
  ipadMiscShdslStatusIndex INTEGER
  ipadMiscShdslConnectionStatus INTEGER
  ipadMiscShdslDetailedConnectionStatus DisplayString
  ipadMiscShdslEOCInMessages INTEGER
  ipadMiscShdslEOCOutMessages INTEGER
  ipadMiscShdslConnectionStatusPair2 INTEGER
  ipadMiscShdslDetailedConnectionStatusPair2 DisplayString

IpadSoftKeyTableEntry  
SEQUENCE    
  ipadSoftKeyIndex INTEGER
  ipadSoftKeyAcronym DisplayString
  ipadSoftKeyDescription DisplayString
  ipadSoftKeyExpirationDate DisplayString

IpadTCPServerConnTableEntry  
SEQUENCE    
  ipadTCPServerConnIndex INTEGER
  ipadTCPServerConnEndpoint DisplayString
  ipadTCPServerConnLocalPort INTEGER
  ipadTCPServerConnEnableEntry INTEGER

IpadTCPServerHostAccessTableEntry  
SEQUENCE    
  ipadTCPServerHostAccessIndex INTEGER
  ipadTCPServerHostAccessIPAddr IpAddress

IpadSCADAConfigTableEntry  
SEQUENCE    
  ipadSCADACfgIndex INTEGER
  ipadSCADACfgMessageSize INTEGER
  ipadSCADACfgIdleCharDelay INTEGER
  ipadSCADACfgInputTerminator INTEGER
  ipadSCADACfgAddDevLst INTEGER
  ipadSCADACfgDeleteDevLst INTEGER
  ipadSCADACfgDataDirection INTEGER
  ipadSCADACfgProtocol INTEGER
  ipadSCADACfgLoopback INTEGER

IpadSCADAStatsTableEntry  
SEQUENCE    
  ipadSCADAStatsIndex INTEGER
  ipadSCADAStatsTxChars INTEGER
  ipadSCADAStatsRxChars INTEGER
  ipadSCADAStatsTxMsgs INTEGER
  ipadSCADAStatsRxMsgs INTEGER
  ipadSCADAStatsRxParityErrors INTEGER
  ipadSCADAStatsRxFramingErrors INTEGER
  ipadSCADAStatsClear INTEGER

IpadSCADADevLstTableEntry  
SEQUENCE    
  ipadSCADADevLstIndex INTEGER
  ipadSCADADevLstDevIndex INTEGER
  ipadSCADADevLstEndpointName DisplayString
  ipadSCADADevLstEntryStatus INTEGER

IpadDS0ConfigTableEntry  
SEQUENCE    
  ipadDS0ConfigIndex INTEGER
  ipadDS0ConfigNumberDS0 INTEGER
  ipadDS0ConfigResetTimer INTEGER
  ipadDS0ConfigHighUtil INTEGER
  ipadDS0ConfigHighUtilThreshold INTEGER
  ipadDS0ConfigHighUtilStatus INTEGER
  ipadDS0ConfigHighUtilCount INTEGER
  ipadDS0ConfigHighUtilAlarm INTEGER
  ipadDS0ConfigLowUtil INTEGER
  ipadDS0ConfigLowUtilAlarm INTEGER
  ipadDS0ConfigReset INTEGER

IpadDS0Hist24TableEntry  
SEQUENCE    
  ipadDS0Hist24Index INTEGER
  ipadDS0Hist24HistoricalIndex INTEGER
  ipadDS0Hist24Timestamp TimeTicks
  ipadDS0Hist24HighUtilSeconds INTEGER
  ipadDS0Hist24Utilization INTEGER

IpadDS0Hist30TableEntry  
SEQUENCE    
  ipadDS0Hist30Index INTEGER
  ipadDS0Hist30HistoricalIndex INTEGER
  ipadDS0Hist30Timestamp TimeTicks
  ipadDS0Hist30HighUtilSeconds INTEGER
  ipadDS0Hist30Utilization INTEGER

IpadHDLCConfigTableEntry  
SEQUENCE    
  ipadHDLCConfigIndex INTEGER
  ipadHDLCConfigService INTEGER
  ipadHDLCConfigServiceBPS INTEGER
  ipadHDLCConfigResetTimer INTEGER
  ipadHDLCConfigRxHighUtil INTEGER
  ipadHDLCConfigRxHighUtilThreshold INTEGER
  ipadHDLCConfigRxHighUtilStatus INTEGER
  ipadHDLCConfigRxHighUtilCount INTEGER
  ipadHDLCConfigRxHighUtilAlarm INTEGER
  ipadHDLCConfigRxLowUtil INTEGER
  ipadHDLCConfigRxLowUtilAlarm INTEGER
  ipadHDLCConfigTxHighUtil INTEGER
  ipadHDLCConfigTxHighUtilThreshold INTEGER
  ipadHDLCConfigTxHighUtilStatus INTEGER
  ipadHDLCConfigTxHighUtilCount INTEGER
  ipadHDLCConfigTxHighUtilAlarm INTEGER
  ipadHDLCConfigTxLowUtil INTEGER
  ipadHDLCConfigTxLowUtilAlarm INTEGER
  ipadHDLCConfigReset INTEGER

IpadHDLCHist24TableEntry  
SEQUENCE    
  ipadHDLCHist24Index INTEGER
  ipadHDLCHist24HistoricalIndex INTEGER
  ipadHDLCHist24Timestamp TimeTicks
  ipadHDLCHist24RxHighUtilSeconds INTEGER
  ipadHDLCHist24RxUtilization INTEGER
  ipadHDLCHist24TxHighUtilSeconds INTEGER
  ipadHDLCHist24TxUtilization INTEGER

IpadHDLCHist30TableEntry  
SEQUENCE    
  ipadHDLCHist30Index INTEGER
  ipadHDLCHist30HistoricalIndex INTEGER
  ipadHDLCHist30Timestamp TimeTicks
  ipadHDLCHist30RxHighUtilSeconds INTEGER
  ipadHDLCHist30RxUtilization INTEGER
  ipadHDLCHist30TxHighUtilSeconds INTEGER
  ipadHDLCHist30TxUtilization INTEGER

IpadAutoLearnDS0TableEntry  
SEQUENCE    
  ipadAutoLearnDS0Index INTEGER
  ipadAutoLearnDS0Boot INTEGER
  ipadAutoLearnDS0Rate INTEGER
  ipadAutoLearnDS0Command INTEGER

IpadUnitAccessTableEntry  
SEQUENCE    
  ipadUnitAccessIndex INTEGER
  ipadUnitAccessIpa IpAddress
  ipadUnitAccessMask IpAddress

IpadDLMTableEntry  
SEQUENCE    
  ipadDLMServiceIndex INTEGER
  ipadDLMEnable INTEGER
  ipadDLMTxRxFilter INTEGER
  ipadDLMPatternEnable INTEGER
  ipadDLMPattern INTEGER
  ipadDLMPatternMask INTEGER
  ipadDLMPatternOffset INTEGER

IpadDLMPacketTableEntry  
SEQUENCE    
  ipadDLMPacketIndex INTEGER
  ipadDLMPacketServiceIndex INTEGER
  ipadDLMPacketTimestamp TimeTicks
  ipadDLMPacketDataDirection INTEGER
  ipadDLMPacketSize INTEGER
  ipadDLMPacketData OCTET STRING

Defined Values

ipad 1.3.6.1.4.1.321.100.1
IPADv2.MIB updated for SNMPv2.
MODULE-IDENTITY    

ipadFrPort 1.3.6.1.4.1.321.100.1.1
OBJECT IDENTIFIER    

ipadService 1.3.6.1.4.1.321.100.1.2
OBJECT IDENTIFIER    

ipadChannel 1.3.6.1.4.1.321.100.1.3
OBJECT IDENTIFIER    

ipadDLCI 1.3.6.1.4.1.321.100.1.4
OBJECT IDENTIFIER    

ipadEndpoint 1.3.6.1.4.1.321.100.1.5
OBJECT IDENTIFIER    

ipadUser 1.3.6.1.4.1.321.100.1.6
OBJECT IDENTIFIER    

ipadPPP 1.3.6.1.4.1.321.100.1.7
OBJECT IDENTIFIER    

ipadModem 1.3.6.1.4.1.321.100.1.8
OBJECT IDENTIFIER    

ipadSvcAware 1.3.6.1.4.1.321.100.1.9
OBJECT IDENTIFIER    

ipadPktSwitch 1.3.6.1.4.1.321.100.1.10
OBJECT IDENTIFIER    

ipadTrapDest 1.3.6.1.4.1.321.100.1.11
OBJECT IDENTIFIER    

ipadMisc 1.3.6.1.4.1.321.100.1.12
OBJECT IDENTIFIER    

ipadRouter 1.3.6.1.4.1.321.100.1.13
OBJECT IDENTIFIER    

ipadSoftKey 1.3.6.1.4.1.321.100.1.14
OBJECT IDENTIFIER    

ipadTCPServer 1.3.6.1.4.1.321.100.1.15
OBJECT IDENTIFIER    

ipadTraps 1.3.6.1.4.1.321.100.1.999
OBJECT IDENTIFIER    

ipadTrapsPrefix 1.3.6.1.4.1.321.100.1.999.0
OBJECT IDENTIFIER    

ipadSCADAConfig 1.3.6.1.4.1.321.100.1.16
OBJECT IDENTIFIER    

ipadSCADAStats 1.3.6.1.4.1.321.100.1.17
OBJECT IDENTIFIER    

ipadSCADADevLst 1.3.6.1.4.1.321.100.1.18
OBJECT IDENTIFIER    

ipadDS0Config 1.3.6.1.4.1.321.100.1.19
OBJECT IDENTIFIER    

ipadDS0Hist24 1.3.6.1.4.1.321.100.1.20
OBJECT IDENTIFIER    

ipadDS0Hist30 1.3.6.1.4.1.321.100.1.21
OBJECT IDENTIFIER    

ipadHDLCConfig 1.3.6.1.4.1.321.100.1.22
OBJECT IDENTIFIER    

ipadHDLCHist24 1.3.6.1.4.1.321.100.1.23
OBJECT IDENTIFIER    

ipadHDLCHist30 1.3.6.1.4.1.321.100.1.24
OBJECT IDENTIFIER    

ipadAtm 1.3.6.1.4.1.321.100.1.25
OBJECT IDENTIFIER    

ipadNat 1.3.6.1.4.1.321.100.1.26
OBJECT IDENTIFIER    

ipadDhcp 1.3.6.1.4.1.321.100.1.27
OBJECT IDENTIFIER    

ipadBridge 1.3.6.1.4.1.321.100.1.28
OBJECT IDENTIFIER    

ipadSmtp 1.3.6.1.4.1.321.100.1.29
OBJECT IDENTIFIER    

ipadEncryption 1.3.6.1.4.1.321.100.1.30
OBJECT IDENTIFIER    

ipadAutoLearnDS0 1.3.6.1.4.1.321.100.1.31
OBJECT IDENTIFIER    

ipadUnitAccess 1.3.6.1.4.1.321.100.1.32
OBJECT IDENTIFIER    

ipadTFTPDownload 1.3.6.1.4.1.321.100.1.33
OBJECT IDENTIFIER    

ipadDataLineMonitor 1.3.6.1.4.1.321.100.1.34
OBJECT IDENTIFIER    

ipadOrigPing 1.3.6.1.4.1.321.100.1.35
OBJECT IDENTIFIER    

ipadFrPortTable 1.3.6.1.4.1.321.100.1.1.1
Table of frame relay port parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadFrPortTableEntry

ipadFrPortTableEntry 1.3.6.1.4.1.321.100.1.1.1.1
An entry in the ipad frame relay port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadFrPortTableEntry  

ipadFrPortService 1.3.6.1.4.1.321.100.1.1.1.1.1
Index into the ipad frame relay port table; an entry in the ipad service table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortActive 1.3.6.1.4.1.321.100.1.1.1.1.2
Specifies if the port is active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadFrPortLMIType 1.3.6.1.4.1.321.100.1.1.1.1.3
Specifies the link management information type used on this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ccitt(2), ansi(3), lmi(4), none(5)  

ipadFrPortLMIMode 1.3.6.1.4.1.321.100.1.1.1.1.4
Specifies the link management information mode used on this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), sourcing(2), monitoring(3)  

ipadFrPortRxInvAlmThreshold 1.3.6.1.4.1.321.100.1.1.1.1.5
Sets the rx invalid frames alarm threshold. Setting this field to 0 disables the alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadFrPortRxInvAlmAlarm 1.3.6.1.4.1.321.100.1.1.1.1.6
Reports if the invalid frames threshold has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadFrPortTxAlmThreshold 1.3.6.1.4.1.321.100.1.1.1.1.7
Sets the tx throughput alarm threshold (in bits/second). Setting this field to 0 disables the alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadFrPortTxAlmAlarm 1.3.6.1.4.1.321.100.1.1.1.1.8
Reports if the tx throughput threshold has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadFrPortRxAlmThreshold 1.3.6.1.4.1.321.100.1.1.1.1.9
Sets the rx throughput alarm threshold (in bits/second). Setting this field to 0 disables the alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadFrPortRxAlmAlarm 1.3.6.1.4.1.321.100.1.1.1.1.10
Reports if the rx throughput threshold has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadFrPortAlarmReset 1.3.6.1.4.1.321.100.1.1.1.1.11
This is used to clear the current alarm counts.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER frPortAlarmResetOther(1), frPortAlarmResetClearAlarms(2), frPortAlarmResetClearStats(3)  

ipadServiceTable 1.3.6.1.4.1.321.100.1.2.1
The ipad service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadServiceTableEntry

ipadServiceTableEntry 1.3.6.1.4.1.321.100.1.2.1.1
An entry in the ipad service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadServiceTableEntry  

ipadServiceIndex 1.3.6.1.4.1.321.100.1.2.1.1.1
The index for the ipad service table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadServiceifIndex 1.3.6.1.4.1.321.100.1.2.1.1.2
The MIB-II ifIndex for this service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), supervisor(1), network1(2), network2(3), user1(4), user2(5), ethernet(6), auxiliary(7), network3(8), atmCES(9), modem(10), virtual(100)  

ipadServiceType 1.3.6.1.4.1.321.100.1.2.1.1.3
The type of this service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), tdm(2), ppp(3), pppMonitor(4), frameRelay(5), frameRelayMonitor(6), ip(7), serial(8), tty(9), scada(10), parallelIO(11), atm(12), hdlcPPP(13), atmCES(14), modem(15)  

ipadServicePair 1.3.6.1.4.1.321.100.1.2.1.1.4
An entry in this table, which establishes a service pairing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadServiceStatus 1.3.6.1.4.1.321.100.1.2.1.1.5
This parameter indicates the status of the service. idle - The service is not doing anything or has not been configured for use. down - The physical layer for the service is not ready. training - The physical layer is not ready but is attempting to come up. connecting - The physical layer is not ready but is attempting to come up. physicalUp - The physical layer is ready the service is not ready. protocolUp - The service is able to pass data. dead - The service is inactive because no resources are available to support it. changed - Service parameters were changed and require a save and restart to take effect.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), idle(2), down(3), physicalUp(4), protocolUp(5), dead(6), changed(7), training(8), connecting(9)  

ipadServiceAddService 1.3.6.1.4.1.321.100.1.2.2
Adds a row to the Service Table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addService(1)  

ipadServiceDeleteService 1.3.6.1.4.1.321.100.1.2.3
Identifies a Service to be deleted; an index into the Service Table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadChannelTable 1.3.6.1.4.1.321.100.1.3.1
The ipad channel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadChannelTableEntry

ipadChannelTableEntry 1.3.6.1.4.1.321.100.1.3.1.1
An entry in the ipad channel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadChannelTableEntry  

ipadChannelifIndex 1.3.6.1.4.1.321.100.1.3.1.1.1
Primary index into ipad channel table, MIB-II ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadChannelIndex 1.3.6.1.4.1.321.100.1.3.1.1.2
Channel index for the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadChannelService 1.3.6.1.4.1.321.100.1.3.1.1.3
Index into service table for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadChannelPair 1.3.6.1.4.1.321.100.1.3.1.1.4
Pair for this channel; an entry in the channel table. Use service pair in service table to determine which service contains this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadChannelRate 1.3.6.1.4.1.321.100.1.3.1.1.5
Rate for this channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), rate56(2), rate64(3), rate8(4)  

ipadChannelIdlePattern 1.3.6.1.4.1.321.100.1.3.1.1.6
Idle pattern for this channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCITable 1.3.6.1.4.1.321.100.1.4.1
The ipad DLCI table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDLCITableEntry

ipadDLCITableEntry 1.3.6.1.4.1.321.100.1.4.1.1
An entry in the ipad DLCI table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDLCITableEntry  

ipadDLCIservice 1.3.6.1.4.1.321.100.1.4.1.1.1
An index into the ipad service table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCInumber 1.3.6.1.4.1.321.100.1.4.1.1.2
The DLCI number for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIactive 1.3.6.1.4.1.321.100.1.4.1.1.3
Specifies if the DLCI is active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3), pending(4)  

ipadDLCIcongestion 1.3.6.1.4.1.321.100.1.4.1.1.4
Specifies if the dlci is receiving frames with FECN or BECN bit set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadDLCIremote 1.3.6.1.4.1.321.100.1.4.1.1.5
Remote DLCI number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIremoteUnit 1.3.6.1.4.1.321.100.1.4.1.1.6
Name of the remote DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

ipadDLCIremoteEquipActive 1.3.6.1.4.1.321.100.1.4.1.1.7
Reports if the equipment attached to the remote unit is active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), inactive(2), active(3), sosAlarm(4)  

ipadDLCIencapsulation 1.3.6.1.4.1.321.100.1.4.1.1.8
Type of protocol encapsulation used on this DLCI.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), rfc1490(2), proprietary(3), rfc1490withEncryption(4), rfc1490withCompression(5)  

ipadDLCIproprietary 1.3.6.1.4.1.321.100.1.4.1.1.9
When the encapsulation is proprietary, the traffic type must be configured to gather protocol specific statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), ip(2), ipx(3), ethertype(4), none(5)  

ipadDLCIpropOffset 1.3.6.1.4.1.321.100.1.4.1.1.10
When the encapsulation is proprietary, this is the number of bytes after the frame relay header to look for the specified protocol decode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLCIinBand 1.3.6.1.4.1.321.100.1.4.1.1.11
Determines if frames on this DLCI will be parsed to look for management frames destined for the unit itself.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadDLCICIR 1.3.6.1.4.1.321.100.1.4.1.1.12
Default committed information rate in bits per second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLCIBe 1.3.6.1.4.1.321.100.1.4.1.1.13
Default excess burst rate in bits per second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLCIminBC 1.3.6.1.4.1.321.100.1.4.1.1.14
If the corresponding interface is configured to enable congestion management, the minimum transfer rate at which the unit will throttle back offering data to the network.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLCIrxMon 1.3.6.1.4.1.321.100.1.4.1.1.15
Determines if the SLA parameters will be monitored for received frames.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadDLCIdEctrl 1.3.6.1.4.1.321.100.1.4.1.1.16
Determines if the Rx monitor will set the DE bit on all frames received in excess of the CIR before they are switched to their destination port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadDLCIenableDelay 1.3.6.1.4.1.321.100.1.4.1.1.17
Enable or disable delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadDLCItxExCIRThreshold 1.3.6.1.4.1.321.100.1.4.1.1.18
Sets the Tx over CIR alarm threshold. This threshold is the number of bits per second in excess of CIR. Setting this field to 0 disables the alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLCItxExCIRAlarm 1.3.6.1.4.1.321.100.1.4.1.1.19
Reports if the Tx over CIR threshold has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadDLCItxExBeThreshold 1.3.6.1.4.1.321.100.1.4.1.1.20
Sets the Tx over Be alarm threshold. This threshold is the number of bits per second in excess of Be. Setting this field to 0 disables the alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLCItxExBeAlarm 1.3.6.1.4.1.321.100.1.4.1.1.21
Reports if the Tx over Be threshold has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadDLCIrxCongThreshold 1.3.6.1.4.1.321.100.1.4.1.1.22
Sets the Rx congestion alarm threshold. This threshold is the number of frames received with BECN/FECN. Setting this field to 0 disables the alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLCIrxCongAlarm 1.3.6.1.4.1.321.100.1.4.1.1.23
Reports if the Rx congestion threshold has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadDLCIrxBECNinCIR 1.3.6.1.4.1.321.100.1.4.1.1.24
Reports if BECN has been received within CIR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), alarmCondition(3)  

ipadDLCIUASThreshold 1.3.6.1.4.1.321.100.1.4.1.1.25
Sets the UAS (unavailable seconds) alarm threshold. This threshold is the number of seconds passed that the DLCI is unavailable. Setting this field to 0 disables the alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLCIUASAlarm 1.3.6.1.4.1.321.100.1.4.1.1.26
Reports if the UAS threshold has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadDLCIAlarmReset 1.3.6.1.4.1.321.100.1.4.1.1.27
This is used to clear the current alarm counts.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dlciAlarmResetOther(1), dlciAlarmResetClearAlarms(2), dlciAlarmResetClearStats(3)  

ipadDLCIRoundTripDelaySize 1.3.6.1.4.1.321.100.1.4.1.1.28
Specifies the packet size in octets used to calculate round trip delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 16..1500  

ipadDLCIRoundTripDelayRate 1.3.6.1.4.1.321.100.1.4.1.1.29
Specifies the packet rate in seconds used to calculate round trip delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

ipadDLCIRemoteFramesOfferedWithinCIR 1.3.6.1.4.1.321.100.1.4.1.1.30
Count of frames sent within CIR from the remote end of the DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIRemoteFramesOfferedWithinBE 1.3.6.1.4.1.321.100.1.4.1.1.31
Count of frames sent within BE, but over CIR, from the remote end of the DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIFramesReceived 1.3.6.1.4.1.321.100.1.4.1.1.32
Count of frames received by the local device on this DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIRemoteDataOfferedWithinCIR 1.3.6.1.4.1.321.100.1.4.1.1.33
Count of data octets sent within CIR from the remote end of the DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIRemoteDataOfferedWithinBE 1.3.6.1.4.1.321.100.1.4.1.1.34
Count of data octets sent within BE, but over CIR, from the remote end of the DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIDataReceived 1.3.6.1.4.1.321.100.1.4.1.1.35
Count of data octets received by the local device on this DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIRemoteIPAddress 1.3.6.1.4.1.321.100.1.4.1.1.36
The IP Address of the device on the remote end of this DLCI. This information is only valid when the remote device supports Verilink's proprietary message exchange.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipadDLCICompressionStatus 1.3.6.1.4.1.321.100.1.4.1.1.37
This is the current status of the compression engine for this DLCI. disabled(2) indicates that the compression engine is disabled. enabledAndNegotiated(3) indicates that compression is enabled, and has been successfully negotiated with the device at the other end. enabledButNotNegotiated(4) indicated that compression is enabled, but has not been successfully negotiated with the device at the other end. This may be due to the DLCI being down, the other device not having compression enabled or other factors which would inhibit communication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabledAndNegotiated(3), enabledButNotNegotiated(4)  

ipadDLCICompressionTxOctetsIn 1.3.6.1.4.1.321.100.1.4.1.1.38
This is a rolling counter of the number of octets given to the compression engine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCICompressionTxOctetsOut 1.3.6.1.4.1.321.100.1.4.1.1.39
This is a rolling counter of the number of octets output from the compression engine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCICompressionRxOctetsIn 1.3.6.1.4.1.321.100.1.4.1.1.40
This is a rolling counter of the number of octets given to the compression engine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCICompressionRxOctetsOut 1.3.6.1.4.1.321.100.1.4.1.1.41
This is a rolling counter of the number of octets given to the compression engine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCILastChange 1.3.6.1.4.1.321.100.1.4.2
Time of the last change in the DLCI table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadEndpointTable 1.3.6.1.4.1.321.100.1.5.1
The ipad endpoint table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadEndpointTableEntry

ipadEndpointTableEntry 1.3.6.1.4.1.321.100.1.5.1.1
An entry in the ipad endpoint table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadEndpointTableEntry  

ipadEndpointIndex 1.3.6.1.4.1.321.100.1.5.1.1.1
The index into the ipad endpoint table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadEndpointName 1.3.6.1.4.1.321.100.1.5.1.1.2
The name for the endpoint.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

ipadEndpointService 1.3.6.1.4.1.321.100.1.5.1.1.3
An index into the ipad service table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadEndpointDLCInumber 1.3.6.1.4.1.321.100.1.5.1.1.4
Data link connection identifier for this endpoint; The DLCI number for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadEndpointType 1.3.6.1.4.1.321.100.1.5.1.1.5
Endpoint type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), frLocal(2), frSwitched(3), ipRoute(4)  

ipadEndpointForward 1.3.6.1.4.1.321.100.1.5.1.1.6
Index into the endpoint names table. This is the endpoint on which data should be forwarded for switched endpoints.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadEndpointBackup 1.3.6.1.4.1.321.100.1.5.1.1.7
Index into the endpoint table. This is the endpoint on which data should be forwarded in the case where the endpoint becomes inactive.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadEndpointRefSLP 1.3.6.1.4.1.321.100.1.5.1.1.8
Index into the endpoint table. The service level parameters can be copied from another configured endpoint.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadEndpointRemoteIpAddr 1.3.6.1.4.1.321.100.1.5.1.1.9
IP address for remote.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadEndpointRemoteIpMask 1.3.6.1.4.1.321.100.1.5.1.1.10
IP address mask for remote.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadEndpointAddEndpoint 1.3.6.1.4.1.321.100.1.5.2
Identifies an Endpoint to be added.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

ipadEndpointDeleteEndpoint 1.3.6.1.4.1.321.100.1.5.3
Identifies an Endpoint to be deleted.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

ipadEndpointLastChange 1.3.6.1.4.1.321.100.1.5.4
Time of the last change in the Endpoint table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadUserTable 1.3.6.1.4.1.321.100.1.6.1
Table of user selected parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadUserTableEntry

ipadUserTableEntry 1.3.6.1.4.1.321.100.1.6.1.1
An entry in the ipad user table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadUserTableEntry  

ipadUserIndex 1.3.6.1.4.1.321.100.1.6.1.1.1
Index into the ipad user table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserFilterByDLCI 1.3.6.1.4.1.321.100.1.6.1.1.2
Enables Service+DLCI filtering for this user statistic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipadUserService 1.3.6.1.4.1.321.100.1.6.1.1.3
Specifies the service for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserDLCI. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadUserDLCI 1.3.6.1.4.1.321.100.1.6.1.1.4
Specifies the DLCI for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserService. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadUserFilterByIPAddress 1.3.6.1.4.1.321.100.1.6.1.1.5
Enables IP address filtering for this user statistic. A packet is counted towards the user statistics if the result of a bitwise-and of an IP address in a transmitted packet with ipadUserIPMask equals ipadUserIPAddress.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipadUserIPAddress 1.3.6.1.4.1.321.100.1.6.1.1.6
Specifies the IP address for this user type.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadUserIPMask 1.3.6.1.4.1.321.100.1.6.1.1.7
Specifies the IP address mask for this user type.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadUserFilterByIPPort 1.3.6.1.4.1.321.100.1.6.1.1.8
Enables IP Port filtering for this user statistic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipadUserIPPort 1.3.6.1.4.1.321.100.1.6.1.1.9
Specifies the IP port for this user type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rje(5), echo(7), systat(11), qotd(17), ftpdata(20), ftp(21), telnet(23), smtp(25), msgauth(31), time(37), nameserver(42), domain(53), sqlnet(66), tftp(69), gopher(70), finger(79), http(80), kerberos(88), npp(92), hostname(101), rtelnet(107), pop2(109), pop3(110), sunrpc(111), auth(113), nntp(119), netbiosns(137), netbiosdgm(138), netbiosssn(139), sgmp(153), snmp(161), snmptrap(162), cmipman(163), cmipagent(164), send(169), bgp(179), irc(194), atrtmp(201), atnbp(202), atecho(204), atzis(206), ipx(213), netcp(395), netwareip(396), snpp(444), povray(494), netwall(533), uucp(540), uucprlogin(541), ipcserver(600), kerberosadm(749)  

ipadUserTxAlmThreshold 1.3.6.1.4.1.321.100.1.6.1.1.10
Sets the tx throughput alarm threshold in bits per second. Setting this field to 0 disables the alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadUserTxAlmAlarm 1.3.6.1.4.1.321.100.1.6.1.1.11
Reports if the tx throughput threshold has been exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadUserAlarmReset 1.3.6.1.4.1.321.100.1.6.1.1.12
This is used to clear the current alarm counts.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER userAlarmResetOther(1), userAlarmResetClearAlarms(2), userAlarmResetClearStats(3)  

ipadUserVpi 1.3.6.1.4.1.321.100.1.6.1.1.13
Specifies the Vpi for this user type; identifies a VC when combined with the ipadUserService and ipadUserVci objects. Meaningful when ipadUserFilterByVpiVci is enabled. Meaningless when collecting PPP or Frame Relay statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadUserVci 1.3.6.1.4.1.321.100.1.6.1.1.14
Specifies the Vci for this user type; identifies a VC when combined with the ipadUserService and ipadUserVpi objects. Meaningful when ipadUserFilterByVpiVci is enabled. Meaningless when collecting PPP or Frame Relay statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadUserFilterByVpiVci 1.3.6.1.4.1.321.100.1.6.1.1.15
Enables Vpi/Vci filtering for this user statistic. A packet is counted towards the user statistics if the packet is transmitted on the service/Vpi/Vci combindation specified by ipadUserService, ipadUserVpi, and ipadUserVci.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipadUserIPStatTimeRemaining 1.3.6.1.4.1.321.100.1.6.2
Specifies seconds until the next IP TopN report is generated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadUserIPStatTimeDuration 1.3.6.1.4.1.321.100.1.6.3
The value of TimeRemaining when TimeRemaining was last set. Indicates the number of seconds that the next IP TopN report will cover.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserIPStatStartTime 1.3.6.1.4.1.321.100.1.6.4
The value of SysUpTime when TimeRemaining was last set.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadUserIPStatRequestedReportSize 1.3.6.1.4.1.321.100.1.6.5
Determines the requested maximum number of entries in the topN report.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadUserIPStatGrantedReportSize 1.3.6.1.4.1.321.100.1.6.6
Determines the granted number of entries in the topN report. This is by definition less than or equal to requested report size.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserIPStatReportNumber 1.3.6.1.4.1.321.100.1.6.7
Specifies the number of reports that have been generated. This value resets to zero when the unit is restarted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserIPStatDiscardType 1.3.6.1.4.1.321.100.1.6.8
The internal table used to track TopN statistics is finite in size. On the condition when the internal table is full and a new IP address is encountered, an element already existing in the table must be removed. This variable determines the manner of selection. Writing byTime(1) will cause the entry with the least recent frame to be discarded. That is, all other entries in the table will have transmitted or received at least one packet more recently. Writing byFrames(2) will select the entry with the fewest transmitted or received frames. Writing byOctets(3) will select the entry with the fewest transmitted or received octets. The default is byTime(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER byTime(1), byFrames(2), byOctets(3)  

ipadPPPCfgTable 1.3.6.1.4.1.321.100.1.7.1
The ipad PPP configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadPPPCfgTableEntry

ipadPPPCfgTableEntry 1.3.6.1.4.1.321.100.1.7.1.1
An entry in the ipad PPP configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadPPPCfgTableEntry  

ipadPPPCfgService 1.3.6.1.4.1.321.100.1.7.1.1.1
The index into the PPP configuration table; an entry in the ipad service table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadPPPCfgDialMode 1.3.6.1.4.1.321.100.1.7.1.1.2
Determines the permancency of a communications connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), direct(2), dialup(3), demanddial(4)  

ipadPPPCfgInactivityTimer 1.3.6.1.4.1.321.100.1.7.1.1.3
Determines when a dial-up or demand-dial connection will be disconnected due to inactivity in both directions. When this parameter is set to zero then the timer is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPPPCfgNegotiationInit 1.3.6.1.4.1.321.100.1.7.1.1.4
Determines if the port waits for the other end to initiate parameter negotiations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgMRU 1.3.6.1.4.1.321.100.1.7.1.1.5
The maximum receive unit the interface will accept. Valid values are in the range 128 - 4096, default is 1500.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPPPCfgACCM 1.3.6.1.4.1.321.100.1.7.1.1.6
Sets the async control character map used when generating async HDLC frames. Setting a bit in the map causes the corresponding character to be mapped for transparency.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPPPCfgNegMRU 1.3.6.1.4.1.321.100.1.7.1.1.7
Determines if MRU size is negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgNegACCM 1.3.6.1.4.1.321.100.1.7.1.1.8
Determines if ACCM is negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgNegMagic 1.3.6.1.4.1.321.100.1.7.1.1.9
Determines if the magic number is negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgNegCompression 1.3.6.1.4.1.321.100.1.7.1.1.10
Determines if the PPP protocol header compression is negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgNegAddress 1.3.6.1.4.1.321.100.1.7.1.1.11
Determines if the PPP HDLC header compression is negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgNegPAP 1.3.6.1.4.1.321.100.1.7.1.1.12
Determines if PAP is negotiated with the peer when a more secure authentication protocol is rejected.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgNegCHAP 1.3.6.1.4.1.321.100.1.7.1.1.13
Determines if CHAP is negotiated with the peer when a more secure authentication protocol is rejected.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgAllowPAP 1.3.6.1.4.1.321.100.1.7.1.1.14
Determines if PAP is allowed to be negotiated by the peer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgAllowCHAP 1.3.6.1.4.1.321.100.1.7.1.1.15
Determines if CHAP is allowed to be negotiated by the peer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgPAPUsername 1.3.6.1.4.1.321.100.1.7.1.1.16
Identification string to determine the user identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadPPPCfgPAPPassword 1.3.6.1.4.1.321.100.1.7.1.1.17
Password string to validate the user identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadPPPCfgCHAPUsername 1.3.6.1.4.1.321.100.1.7.1.1.18
Identification string to determine the user identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadPPPCfgCHAPSecret 1.3.6.1.4.1.321.100.1.7.1.1.19
Password string to validate the user identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadPPPCfgPortIpAddress 1.3.6.1.4.1.321.100.1.7.1.1.20
Sets the IP address of the unit's port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadPPPCfgPeerIpAddress 1.3.6.1.4.1.321.100.1.7.1.1.21
Sets the IP address of the unit's peer.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadPPPCfgNegIpAddress 1.3.6.1.4.1.321.100.1.7.1.1.22
Determines if IP addresses are dynamically negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgNegIPCPCompression 1.3.6.1.4.1.321.100.1.7.1.1.23
Determines if Van Jacobson TCPIP header compression is negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgSubnetMask 1.3.6.1.4.1.321.100.1.7.1.1.24
Specifies the subnet mask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadPPPCfgAuthChallengeInterval 1.3.6.1.4.1.321.100.1.7.1.1.25
Specifies the authentication challenge interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPPPCfgEndpoint 1.3.6.1.4.1.321.100.1.7.1.1.26
Endpoint name to run PPP over another protocol.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

ipadPPPCfgNegIpMask 1.3.6.1.4.1.321.100.1.7.1.1.27
Determines if the subnet Mask is negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPCfgNegDNSAddress 1.3.6.1.4.1.321.100.1.7.1.1.28
Determines if the DNS address is negotiated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPPPPAPTable 1.3.6.1.4.1.321.100.1.7.2
Table of PAP authentication parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadPPPPAPTableEntry

ipadPPPPAPTableEntry 1.3.6.1.4.1.321.100.1.7.2.1
An entry in the ipad PPP PAP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadPPPPAPTableEntry  

ipadPPPPAPTableIndex 1.3.6.1.4.1.321.100.1.7.2.1.1
The index into the PPP PAP association table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadPPPPAPTableUsername 1.3.6.1.4.1.321.100.1.7.2.1.2
Identification string to identify the user.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadPPPPAPTablePassword 1.3.6.1.4.1.321.100.1.7.2.1.3
Password string to validate the user identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadPPPCHAPTable 1.3.6.1.4.1.321.100.1.7.3
Table of CHAP authentication parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadPPPCHAPTableEntry

ipadPPPCHAPTableEntry 1.3.6.1.4.1.321.100.1.7.3.1
An entry in the ipad PPP CHAP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadPPPCHAPTableEntry  

ipadPPPCHAPTableIndex 1.3.6.1.4.1.321.100.1.7.3.1.1
The index into the PPP CHAP association table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadPPPCHAPTableUsername 1.3.6.1.4.1.321.100.1.7.3.1.2
Identification string to identify the user.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadPPPCHAPTableSecret 1.3.6.1.4.1.321.100.1.7.3.1.3
Password string to validate the user identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadModemDialTable 1.3.6.1.4.1.321.100.1.8.1
Table of modem dialing parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadModemDialTableEntry

ipadModemDialTableEntry 1.3.6.1.4.1.321.100.1.8.1.1
An entry in the ipad modem dialing parameters table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadModemDialTableEntry  

ipadModemDialTableIndex 1.3.6.1.4.1.321.100.1.8.1.1.1
The index into the ipad modem dialing parameters table. Equivalent to MIB-II ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadModemDialDataIndex 1.3.6.1.4.1.321.100.1.8.1.1.2
An index into the Modem Data Table, which selects a modem.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadModemDialNumber 1.3.6.1.4.1.321.100.1.8.1.1.3
Specifies the telephone number to dial.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDialAbortTimer 1.3.6.1.4.1.321.100.1.8.1.1.4
Aborts a connection attempt if a dial-up connection has failed to connect within the specified number of seconds. Range is 1..255.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadModemDialRedialAttempts 1.3.6.1.4.1.321.100.1.8.1.1.5
Determines how many attempts to initiate a dial-up connection after the initial failure. Range is 0..10.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadModemDialDelayBeforeRedial 1.3.6.1.4.1.321.100.1.8.1.1.6
Specifies the number of seconds to wait before redialing. Range is 1..255.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadModemDialLoginScript 1.3.6.1.4.1.321.100.1.8.1.1.7
Script string interpreted after an originated dial-up connection is first established.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDialUsername 1.3.6.1.4.1.321.100.1.8.1.1.8
Identification string to determine the user identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadModemDialPassword 1.3.6.1.4.1.321.100.1.8.1.1.9
Password string to validate the user identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

ipadModemDialChallengeScript 1.3.6.1.4.1.321.100.1.8.1.1.10
Script string interpreted after an answered dial-up connection is first established.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDialAnswerRings 1.3.6.1.4.1.321.100.1.8.1.1.11
Answers an incoming call on the given number of rings. A value of zero disables answering. Range is 0..255.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadModemDialCommand 1.3.6.1.4.1.321.100.1.8.1.1.12
The set values perform the following actions: setupNow - Execute the modem setup scripts dialNow - Initiate dialing procedures answerNow - Initiate answering procedures disconnectNow - Initiate disconnect procedures
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), setupNow(2), dialNow(3), answerNow(4), disconnectNow(5)  

ipadModemDialStatus 1.3.6.1.4.1.321.100.1.8.1.1.13
This object reports the current activity of the modem control feature disabled - The feature is not enabled setup - The feature is configuring the modem error - The feature could not setup the modem idle - The feature is ready to operate dialing - The feature is placing a call dialWait - The feature is between call attempts ringing - The feature is waiting for an incoming call to connect or go away answering - The feature is answering a call negotiating - The feature is negotiating the login security online - The feature data path is connected disconnecting - The feature is disconnecting a call awaitingCallback - The feature is waiting for a security callback
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), idle(3), dialing(4), answering(5), negotiating(6), online(7), disconnecting(8), error(9), setup(10), awaitingCallback(11), dialWait(12), ringing(13)  

ipadModemDialSecurity 1.3.6.1.4.1.321.100.1.8.1.1.14
disable - Dial-up security not enabled password - Challenge/Login password scripts used callback - Password security followed by answerer calling back callbackVerify - Callback and verify using the callback challenge/response scripts
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), password(3), callback(4), callbackVerify(5)  

ipadModemDialCallbackRedialDelay 1.3.6.1.4.1.321.100.1.8.1.1.15
Specifies the number of seconds to wait before redialing. Range is 1..255.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadModemDialCallbackTimeout 1.3.6.1.4.1.321.100.1.8.1.1.16
This object sets the number of seconds to wait for a security callback before failing the connection attempt.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadModemDialCallbackChalScript 1.3.6.1.4.1.321.100.1.8.1.1.17
Callback security challenge script interpreted after originating a callback dial-up connection.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDialCallbackRspScript 1.3.6.1.4.1.321.100.1.8.1.1.18
Callback security challenge response script interpreted after answering a callback dial-up connection.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataTable 1.3.6.1.4.1.321.100.1.8.2
Table of modem database parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadModemDataTableEntry

ipadModemDataTableEntry 1.3.6.1.4.1.321.100.1.8.2.1
An entry in the ipad modem database parameters table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadModemDataTableEntry  

ipadModemDataTableIndex 1.3.6.1.4.1.321.100.1.8.2.1.1
The index into the ipad modem database parameters table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadModemDataModemName 1.3.6.1.4.1.321.100.1.8.2.1.2
Identification string for the modem database.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

ipadModemDataSetupScript 1.3.6.1.4.1.321.100.1.8.2.1.3
First script interpreted when a modem port is initialized.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataDialingScript 1.3.6.1.4.1.321.100.1.8.2.1.4
Script interpreted when a dial-up connection is initiated.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataAnswerScript 1.3.6.1.4.1.321.100.1.8.2.1.5
Script interpreted when a modem port decides to answer an incoming call.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataHangupScript 1.3.6.1.4.1.321.100.1.8.2.1.6
Script interpreted when a dial-up connection is no longer needed.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataSyncScript 1.3.6.1.4.1.321.100.1.8.2.1.7
Script interpreted to configure the modem to pass synchronous data.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataSyncMethod 1.3.6.1.4.1.321.100.1.8.2.1.8
This object specifies how synchronous user data is passed to the modem. none - The modem does not support synchronous user data. sync - The modem directly supports synchronous user data. v80 - Synchronous user data is exchanged using ITU-T V.80 procedures without CRC. v80crc - Synchronous user data is exchanged using ITU-T V.80 procedures with CRC. rfc1662 - Synchronous user data is exchanged using the method described by RFC1662.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), none(2), sync(3), v80(4), rfc1662(5), v80crc(6)  

ipadModemDataSetupScript2 1.3.6.1.4.1.321.100.1.8.2.1.9
Second script interpreted when a modem port is initialized.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataSetupScript3 1.3.6.1.4.1.321.100.1.8.2.1.10
Third script interpreted when a modem port is initialized.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataSetupScript4 1.3.6.1.4.1.321.100.1.8.2.1.11
Fourth script interpreted when a modem port is initialized.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadModemDataSetupScript5 1.3.6.1.4.1.321.100.1.8.2.1.12
Fifth script interpreted when a modem port is initialized.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..60)  

ipadDbuTable 1.3.6.1.4.1.321.100.1.8.3
The Dial Backup configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDbuTableEntry

ipadDbuTableEntry 1.3.6.1.4.1.321.100.1.8.3.1
An entry in the Dial Backup configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDbuTableEntry  

ipadDbuIndex 1.3.6.1.4.1.321.100.1.8.3.1.1
An index into the Dial Backup configuration table. Equivalent to MIB-II ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDbuOperation 1.3.6.1.4.1.321.100.1.8.3.1.2
This object specifes the basic operation of the Dial Backup feature. disable - Dial Backup is not to operate automatic - Dial Backup will start and end automatically automaticDaily - Dial Backup will operate automatically within the specified times in the Daily Dial Backup Table forceBackup - The unit will operate in backup mode unconditionally testOriginate - The unit will start backup procedures and hold the dial-up connection testAnswer - The unit will await a call, establish, and hold the dial-up connection
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), automatic(3), automaticDaily(4), forceBackup(5), testOriginate(6), testAnswer(7)  

ipadDbuMonitoredifIndex 1.3.6.1.4.1.321.100.1.8.3.1.7
Network MIB-II ifIndex monitored by Dial Backup.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDbuActivator1 1.3.6.1.4.1.321.100.1.8.3.1.8
This object specifies what will trigger a dial backup activation. disable - No alarm will trigger any - Trigger on any active alarm listed here carrier - Trigger on LOS, OOF, or OOS alarms es - Trigger on the Errored Seconds alarm ses - Trigger on the Severely Errored Seconds alarm uas - Trigger on the Unavailable Seconds alarm los - Trigger on the Loss Of Signal alarm cs - Trigger on the Controlled Slip alarm bpv - Trigger on the Bipolar Violation alarm oof - Trigger on the Out Of Frame alarm ais - Trigger on the Alarm Indication Signal alarm ras - Trigger on the Remote Alarm Signal alarm oos - Trigger on the Out Of Service alarm
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), any(3), carrier(4), es(5), ses(6), uas(7), los(8), cs(9), bpv(10), oof(11), ais(12), ras(13), oos(14)  

ipadDbuActivator2 1.3.6.1.4.1.321.100.1.8.3.1.9
This object specifies what will trigger a dial backup activation. disable - No alarm will trigger any - Trigger on any active alarm listed here carrier - Trigger on LOS, OOF, or OOS alarms es - Trigger on the Errored Seconds alarm ses - Trigger on the Severely Errored Seconds alarm uas - Trigger on the Unavailable Seconds alarm los - Trigger on the Loss Of Signal alarm cs - Trigger on the Controlled Slip alarm bpv - Trigger on the Bipolar Violation alarm oof - Trigger on the Out Of Frame alarm ais - Trigger on the Alarm Indication Signal alarm ras - Trigger on the Remote Alarm Signal alarm oos - Trigger on the Out Of Service alarm
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), any(3), carrier(4), es(5), ses(6), uas(7), los(8), cs(9), bpv(10), oof(11), ais(12), ras(13), oos(14)  

ipadDbuRevertDelay 1.3.6.1.4.1.321.100.1.8.3.1.10
This object specifies the number of seconds the dial backup activators must be continuously gone before the normal connection is restored.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDbuTrapDelay 1.3.6.1.4.1.321.100.1.8.3.1.11
This object specifies the number of seconds after entering the active state before sending the Dial Backup trap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDbuStatus 1.3.6.1.4.1.321.100.1.8.3.1.12
This object reports the current activity of the Dial Backup feature disabled - The feature is not enabled setup - The feature is configuring the modem error - The feature could not setup the modem standby - The feature is ready to operate disallowed - The Dial Backup Daily table prevents activation dialing - The feature is placing a call dialWait - The feature is between call attempts ringing - The feature is waiting for an incoming call to connect or go away answering - The feature is answering a call negotiating - The feature is negotiating the login security awaitingCallback - The feature is waiting for a security callback active - The feature backup path is connected disconnecting - The feature is disconnecting a call testWaiting - The feature is waiting for a link test call testPassed - The feature has successfully tested the backup link testFailed - The feature could not establish the backup link
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), standby(3), disallowed(4), dialing(5), answering(6), negotiating(7), awaitingCallback(8), active(9), disconnecting(10), testWaiting(11), testPassed(12), testFailed(13), error(14), setup(15), dialWait(16), ringing(17)  

ipadDbuTrap 1.3.6.1.4.1.321.100.1.8.3.1.13
Enable or disable the Dial Backup trap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadDbuDailyTable 1.3.6.1.4.1.321.100.1.8.4
The Daily Dial Backup Times Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDbuDailyTableEntry

ipadDbuDailyTableEntry 1.3.6.1.4.1.321.100.1.8.4.1
An entry in the Daily Dial Backup Times Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDbuDailyTableEntry  

ipadDbuDailyIndex 1.3.6.1.4.1.321.100.1.8.4.1.1
An index into the Daily Dial Backup Times Table. Equivalent to MIB-II ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDbuDailyDayOfWeek 1.3.6.1.4.1.321.100.1.8.4.1.2
This is the day of the week index into the Daily Dial Backup Times Table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), friday(6), saturday(7)  

ipadDbuDailyStart 1.3.6.1.4.1.321.100.1.8.4.1.3
This object is the beginning of a window for Dial Backup activation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hour00(1), hour01(2), hour02(3), hour03(4), hour04(5), hour05(6), hour06(7), hour07(8), hour08(9), hour09(10), hour10(11), hour11(12), hour12(13), hour13(14), hour14(15), hour15(16), hour16(17), hour17(18), hour18(19), hour19(20), hour20(21), hour21(22), hour22(23), hour23(24)  

ipadDbuDailyLength 1.3.6.1.4.1.321.100.1.8.4.1.4
This object is the size of a window for Dial Backup activation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), hour01(2), hour02(3), hour03(4), hour04(5), hour05(6), hour06(7), hour07(8), hour08(9), hour09(10), hour10(11), hour11(12), hour12(13), hour13(14), hour14(15), hour15(16), hour16(17), hour17(18), hour18(19), hour19(20), hour20(21), hour21(22), hour22(23), hour23(24), hour24(25)  

ipadFrPortStatsTable 1.3.6.1.4.1.321.100.1.9.1
Port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadFrPortStatsEntry

ipadFrPortStatsEntry 1.3.6.1.4.1.321.100.1.9.1.1
An entry in the service aware ports statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadFrPortStatsEntry  

ipadFrPortStatsService 1.3.6.1.4.1.321.100.1.9.1.1.1
Port index in the ipadFrPortStats table; an entry in the ipad service table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsPeriod 1.3.6.1.4.1.321.100.1.9.1.1.2
The index into the port stats 24-hour table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER portStatsSummary(1), portStatsCurrent(2), portStatsperiod1(3), portStatsperiod2(4), portStatsperiod3(5), portStatsperiod4(6), portStatsperiod5(7), portStatsperiod6(8), portStatsperiod7(9), portStatsperiod8(10), portStatsperiod9(11), portStatsperiod10(12), portStatsperiod11(13), portStatsperiod12(14), portStatsperiod13(15), portStatsperiod14(16), portStatsperiod15(17), portStatsperiod16(18), portStatsperiod17(19), portStatsperiod18(20), portStatsperiod19(21), portStatsperiod20(22), portStatsperiod21(23), portStatsperiod22(24), portStatsperiod23(25), portStatsperiod24(26), portStatsperiod25(27), portStatsperiod26(28), portStatsperiod27(29), portStatsperiod28(30), portStatsperiod29(31), portStatsperiod30(32), portStatsperiod31(33), portStatsperiod32(34), portStatsperiod33(35), portStatsperiod34(36), portStatsperiod35(37), portStatsperiod36(38), portStatsperiod37(39), portStatsperiod38(40), portStatsperiod39(41), portStatsperiod40(42), portStatsperiod41(43), portStatsperiod42(44), portStatsperiod43(45), portStatsperiod44(46), portStatsperiod45(47), portStatsperiod46(48), portStatsperiod47(49), portStatsperiod48(50), portStatsperiod49(51), portStatsperiod50(52), portStatsperiod51(53), portStatsperiod52(54), portStatsperiod53(55), portStatsperiod54(56), portStatsperiod55(57), portStatsperiod56(58), portStatsperiod57(59), portStatsperiod58(60), portStatsperiod59(61), portStatsperiod60(62), portStatsperiod61(63), portStatsperiod62(64), portStatsperiod63(65), portStatsperiod64(66), portStatsperiod65(67), portStatsperiod66(68), portStatsperiod67(69), portStatsperiod68(70), portStatsperiod69(71), portStatsperiod70(72), portStatsperiod71(73), portStatsperiod72(74), portStatsperiod73(75), portStatsperiod74(76), portStatsperiod75(77), portStatsperiod76(78), portStatsperiod77(79), portStatsperiod78(80), portStatsperiod79(81), portStatsperiod80(82), portStatsperiod81(83), portStatsperiod82(84), portStatsperiod83(85), portStatsperiod84(86), portStatsperiod85(87), portStatsperiod86(88), portStatsperiod87(89), portStatsperiod88(90), portStatsperiod89(91), portStatsperiod90(92), portStatsperiod91(93), portStatsperiod92(94), portStatsperiod93(95), portStatsperiod94(96), portStatsperiod95(97), portStatsperiod96(98)  

ipadFrPortStatsTxFrames 1.3.6.1.4.1.321.100.1.9.1.1.3
Number of transmitted frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxFrames 1.3.6.1.4.1.321.100.1.9.1.1.4
Number of received frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTxOctets 1.3.6.1.4.1.321.100.1.9.1.1.5
Number of transmitted octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxOctets 1.3.6.1.4.1.321.100.1.9.1.1.6
Number of received octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTxMgmtFrames 1.3.6.1.4.1.321.100.1.9.1.1.7
Number of transmitted management frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxMgmtFrames 1.3.6.1.4.1.321.100.1.9.1.1.8
Number of received management frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTxMgmtOctets 1.3.6.1.4.1.321.100.1.9.1.1.9
Number of transmitted management octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxMgmtOctets 1.3.6.1.4.1.321.100.1.9.1.1.10
Number of received management octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxFECN 1.3.6.1.4.1.321.100.1.9.1.1.11
Number of received frames with FECN set for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxBECN 1.3.6.1.4.1.321.100.1.9.1.1.12
Number of received frames with BECN set for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxInvalid 1.3.6.1.4.1.321.100.1.9.1.1.13
Number of invalid received frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTxStatInq 1.3.6.1.4.1.321.100.1.9.1.1.14
Number of transmitted status inquiry frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxStatInq 1.3.6.1.4.1.321.100.1.9.1.1.15
Number of received status inquiry frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTxStatResp 1.3.6.1.4.1.321.100.1.9.1.1.16
Number of transmitted status response frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxStatResp 1.3.6.1.4.1.321.100.1.9.1.1.17
Number of received status response frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxInvLMI 1.3.6.1.4.1.321.100.1.9.1.1.18
Number of received frames with an invalid LMI for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsPeak 1.3.6.1.4.1.321.100.1.9.1.1.19
Peak throughput rate for the period (in bits/second).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsAverage 1.3.6.1.4.1.321.100.1.9.1.1.20
Average throughput rate for the period (in bits/second).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTimeStamp 1.3.6.1.4.1.321.100.1.9.1.1.21
The value of sysUpTime the last time the statistics were updated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadFrPortStatsTxAvgPercent 1.3.6.1.4.1.321.100.1.9.1.1.22
Average Tx throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTxMaxPercent 1.3.6.1.4.1.321.100.1.9.1.1.23
Maximum Tx throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTxInstantPercent 1.3.6.1.4.1.321.100.1.9.1.1.24
Instantaneous Tx throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTx20PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.25
Number of seconds Tx throughput was 0-20% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTx40PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.26
Number of seconds Tx throughput was 21-40% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTx60PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.27
Number of seconds Tx throughput was 41-60% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTx80PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.28
Number of seconds Tx throughput was 61-80% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsTx100PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.29
Number of seconds Tx throughput was 81-100% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxAvgPercent 1.3.6.1.4.1.321.100.1.9.1.1.30
Average Rx throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxMaxPercent 1.3.6.1.4.1.321.100.1.9.1.1.31
Maximum Rx throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRxInstantPercent 1.3.6.1.4.1.321.100.1.9.1.1.32
Instantaneous Rx throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRx20PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.33
Number of seconds Rx throughput was 0-20% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRx40PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.34
Number of seconds Rx throughput was 21-40% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRx60PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.35
Number of seconds Rx throughput was 41-60% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRx80PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.36
Number of seconds Rx throughput was 61-80% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsRx100PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.37
Number of seconds Rx throughput was 81-100% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadFrPortStatsValidIntervals 1.3.6.1.4.1.321.100.1.9.1.1.38
Number of valid intervals in the table excluding the Summary and Current entries.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

ipadDLCIstatsTable 1.3.6.1.4.1.321.100.1.9.2
Port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDLCIstatsEntry

ipadDLCIstatsEntry 1.3.6.1.4.1.321.100.1.9.2.1
An entry in the service aware DLCI statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDLCIstatsEntry  

ipadDLCIstatsService 1.3.6.1.4.1.321.100.1.9.2.1.1
The service index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsDLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsDLCI 1.3.6.1.4.1.321.100.1.9.2.1.2
The DLCI index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsService.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsPeriod 1.3.6.1.4.1.321.100.1.9.2.1.3
The index into the DLCI stats 24-hour table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dlciStatsSummary(1), dlciStatsCurrent(2), dlciStatsperiod1(3), dlciStatsperiod2(4), dlciStatsperiod3(5), dlciStatsperiod4(6), dlciStatsperiod5(7), dlciStatsperiod6(8), dlciStatsperiod7(9), dlciStatsperiod8(10), dlciStatsperiod9(11), dlciStatsperiod10(12), dlciStatsperiod11(13), dlciStatsperiod12(14), dlciStatsperiod13(15), dlciStatsperiod14(16), dlciStatsperiod15(17), dlciStatsperiod16(18), dlciStatsperiod17(19), dlciStatsperiod18(20), dlciStatsperiod19(21), dlciStatsperiod20(22), dlciStatsperiod21(23), dlciStatsperiod22(24), dlciStatsperiod23(25), dlciStatsperiod24(26), dlciStatsperiod25(27), dlciStatsperiod26(28), dlciStatsperiod27(29), dlciStatsperiod28(30), dlciStatsperiod29(31), dlciStatsperiod30(32), dlciStatsperiod31(33), dlciStatsperiod32(34), dlciStatsperiod33(35), dlciStatsperiod34(36), dlciStatsperiod35(37), dlciStatsperiod36(38), dlciStatsperiod37(39), dlciStatsperiod38(40), dlciStatsperiod39(41), dlciStatsperiod40(42), dlciStatsperiod41(43), dlciStatsperiod42(44), dlciStatsperiod43(45), dlciStatsperiod44(46), dlciStatsperiod45(47), dlciStatsperiod46(48), dlciStatsperiod47(49), dlciStatsperiod48(50), dlciStatsperiod49(51), dlciStatsperiod50(52), dlciStatsperiod51(53), dlciStatsperiod52(54), dlciStatsperiod53(55), dlciStatsperiod54(56), dlciStatsperiod55(57), dlciStatsperiod56(58), dlciStatsperiod57(59), dlciStatsperiod58(60), dlciStatsperiod59(61), dlciStatsperiod60(62), dlciStatsperiod61(63), dlciStatsperiod62(64), dlciStatsperiod63(65), dlciStatsperiod64(66), dlciStatsperiod65(67), dlciStatsperiod66(68), dlciStatsperiod67(69), dlciStatsperiod68(70), dlciStatsperiod69(71), dlciStatsperiod70(72), dlciStatsperiod71(73), dlciStatsperiod72(74), dlciStatsperiod73(75), dlciStatsperiod74(76), dlciStatsperiod75(77), dlciStatsperiod76(78), dlciStatsperiod77(79), dlciStatsperiod78(80), dlciStatsperiod79(81), dlciStatsperiod80(82), dlciStatsperiod81(83), dlciStatsperiod82(84), dlciStatsperiod83(85), dlciStatsperiod84(86), dlciStatsperiod85(87), dlciStatsperiod86(88), dlciStatsperiod87(89), dlciStatsperiod88(90), dlciStatsperiod89(91), dlciStatsperiod90(92), dlciStatsperiod91(93), dlciStatsperiod92(94), dlciStatsperiod93(95), dlciStatsperiod94(96), dlciStatsperiod95(97), dlciStatsperiod96(98)  

ipadDLCIstatsTxFrames 1.3.6.1.4.1.321.100.1.9.2.1.4
The number of transmitted frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRxFrames 1.3.6.1.4.1.321.100.1.9.2.1.5
The number of received frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsTxOctets 1.3.6.1.4.1.321.100.1.9.2.1.6
The number of transmitted octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRxOctets 1.3.6.1.4.1.321.100.1.9.2.1.7
The number of received octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRxFECN 1.3.6.1.4.1.321.100.1.9.2.1.8
The number of received frames with FECN set for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRxBECN 1.3.6.1.4.1.321.100.1.9.2.1.9
The number of received frames with BECN set for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRxDE 1.3.6.1.4.1.321.100.1.9.2.1.10
The number of received frames with DE bit set for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsTxExcessCIR 1.3.6.1.4.1.321.100.1.9.2.1.11
The number of transmitted octets in excess of CIR for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsTxExcessBe 1.3.6.1.4.1.321.100.1.9.2.1.12
The number of transmitted octets in excess of Be for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsTxMgmtFrames 1.3.6.1.4.1.321.100.1.9.2.1.13
The number of transmitted management frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRxMgmtFrames 1.3.6.1.4.1.321.100.1.9.2.1.14
The number of received management frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsTxMgmtOctets 1.3.6.1.4.1.321.100.1.9.2.1.15
The number of transmitted management octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRxMgmtOctets 1.3.6.1.4.1.321.100.1.9.2.1.16
The number of received management octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsPeak 1.3.6.1.4.1.321.100.1.9.2.1.17
Peak throughput rate for the period (in bits/second).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsAverage 1.3.6.1.4.1.321.100.1.9.2.1.18
Average throughput rate for the period (in bits/second).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsDelayPeak 1.3.6.1.4.1.321.100.1.9.2.1.19
Peak roundtrip delay for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsDelayAverage 1.3.6.1.4.1.321.100.1.9.2.1.20
Average roundtrip delay for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRoundTripTimeouts 1.3.6.1.4.1.321.100.1.9.2.1.21
Number of timeouts on roundtrip delay for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsUAS 1.3.6.1.4.1.321.100.1.9.2.1.22
Number of seconds the DLCI is unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsFdrCir 1.3.6.1.4.1.321.100.1.9.2.1.23
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsDdrCir 1.3.6.1.4.1.321.100.1.9.2.1.24
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsFdrBe 1.3.6.1.4.1.321.100.1.9.2.1.25
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsDdrBe 1.3.6.1.4.1.321.100.1.9.2.1.26
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsTimeStamp 1.3.6.1.4.1.321.100.1.9.2.1.27
The value of sysUpTime the last time the statistics were updated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadDLCIstatsRemoteFramesOfferedWithinCIR 1.3.6.1.4.1.321.100.1.9.2.1.28
Count of frames sent within CIR from the remote end of the DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRemoteFramesOfferedWithinBE 1.3.6.1.4.1.321.100.1.9.2.1.29
Count of frames sent within BE, but over CIR, from the remote end of the DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsFramesReceived 1.3.6.1.4.1.321.100.1.9.2.1.30
Count of frames received by the local device on this DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsFDRCIR 1.3.6.1.4.1.321.100.1.9.2.1.31
Frame Delivery Ratio calculated within CIR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadDLCIstatsFDRBE 1.3.6.1.4.1.321.100.1.9.2.1.32
Frame Delivery Ratio caclulated within BE.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadDLCIstatsRemoteDataOfferedWithinCIR 1.3.6.1.4.1.321.100.1.9.2.1.33
Count of data octets sent within CIR from the remote end of the DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsRemoteDataOfferedWithinBE 1.3.6.1.4.1.321.100.1.9.2.1.34
Count of data octets sent within BE, but over CIR, from the remote end of the DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsDataReceived 1.3.6.1.4.1.321.100.1.9.2.1.35
Count of data octets received by the local device on this DLCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsDDRCIR 1.3.6.1.4.1.321.100.1.9.2.1.36
Data Delivery Ratio calculated within CIR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadDLCIstatsDDRBE 1.3.6.1.4.1.321.100.1.9.2.1.37
Data Delivery Ratio caclulated within BE.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadDLCIstatsAvgPercent 1.3.6.1.4.1.321.100.1.9.2.1.38
Average throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsMaxPercent 1.3.6.1.4.1.321.100.1.9.2.1.39
Maximum throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsInstantPercent 1.3.6.1.4.1.321.100.1.9.2.1.40
Instantaneous throughput percent for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstats20PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.41
Number of seconds throughput was 0-20% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstats40PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.42
Number of seconds throughput was 21-40% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstats60PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.43
Number of seconds throughput was 41-60% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstats80PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.44
Number of seconds throughput was 61-80% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstats100PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.45
Number of seconds throughput was 81-100% of bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsValidIntervals 1.3.6.1.4.1.321.100.1.9.2.1.46
Number of valid intervals in the table excluding the Summary and Current entries.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

ipadDLCIstatsCompressionTxOctetsIn 1.3.6.1.4.1.321.100.1.9.2.1.47
Number of octets passed into the compression engine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsCompressionTxOctetsOut 1.3.6.1.4.1.321.100.1.9.2.1.48
Number of octets passed out of the compression engine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsCompressionRxOctetsIn 1.3.6.1.4.1.321.100.1.9.2.1.49
Number of octets passed into the compression engine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsCompressionRxOctetsOut 1.3.6.1.4.1.321.100.1.9.2.1.50
Number of octets passed out of the compression engine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLCIstatsCompressionTxRatio 1.3.6.1.4.1.321.100.1.9.2.1.51
Compression Ratio calculated in the transmit direction.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadDLCIstatsCompressionRxRatio 1.3.6.1.4.1.321.100.1.9.2.1.52
Compression Ratio calculation in the receive direction.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadUserStatsTable 1.3.6.1.4.1.321.100.1.9.3
User-selected protocol statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadUserStatsEntry

ipadUserStatsEntry 1.3.6.1.4.1.321.100.1.9.3.1
An entry in the user statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadUserStatsEntry  

ipadUserStatsIndex 1.3.6.1.4.1.321.100.1.9.3.1.1
Index into the user statistics table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserStatsPeriod 1.3.6.1.4.1.321.100.1.9.3.1.2
The index into the user stats 24-hour table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER userStatsSummary(1), userStatsCurrent(2), userStatsperiod1(3), userStatsperiod2(4), userStatsperiod3(5), userStatsperiod4(6), userStatsperiod5(7), userStatsperiod6(8), userStatsperiod7(9), userStatsperiod8(10), userStatsperiod9(11), userStatsperiod10(12), userStatsperiod11(13), userStatsperiod12(14), userStatsperiod13(15), userStatsperiod14(16), userStatsperiod15(17), userStatsperiod16(18), userStatsperiod17(19), userStatsperiod18(20), userStatsperiod19(21), userStatsperiod20(22), userStatsperiod21(23), userStatsperiod22(24), userStatsperiod23(25), userStatsperiod24(26), userStatsperiod25(27), userStatsperiod26(28), userStatsperiod27(29), userStatsperiod28(30), userStatsperiod29(31), userStatsperiod30(32), userStatsperiod31(33), userStatsperiod32(34), userStatsperiod33(35), userStatsperiod34(36), userStatsperiod35(37), userStatsperiod36(38), userStatsperiod37(39), userStatsperiod38(40), userStatsperiod39(41), userStatsperiod40(42), userStatsperiod41(43), userStatsperiod42(44), userStatsperiod43(45), userStatsperiod44(46), userStatsperiod45(47), userStatsperiod46(48), userStatsperiod47(49), userStatsperiod48(50), userStatsperiod49(51), userStatsperiod50(52), userStatsperiod51(53), userStatsperiod52(54), userStatsperiod53(55), userStatsperiod54(56), userStatsperiod55(57), userStatsperiod56(58), userStatsperiod57(59), userStatsperiod58(60), userStatsperiod59(61), userStatsperiod60(62), userStatsperiod61(63), userStatsperiod62(64), userStatsperiod63(65), userStatsperiod64(66), userStatsperiod65(67), userStatsperiod66(68), userStatsperiod67(69), userStatsperiod68(70), userStatsperiod69(71), userStatsperiod70(72), userStatsperiod71(73), userStatsperiod72(74), userStatsperiod73(75), userStatsperiod74(76), userStatsperiod75(77), userStatsperiod76(78), userStatsperiod77(79), userStatsperiod78(80), userStatsperiod79(81), userStatsperiod80(82), userStatsperiod81(83), userStatsperiod82(84), userStatsperiod83(85), userStatsperiod84(86), userStatsperiod85(87), userStatsperiod86(88), userStatsperiod87(89), userStatsperiod88(90), userStatsperiod89(91), userStatsperiod90(92), userStatsperiod91(93), userStatsperiod92(94), userStatsperiod93(95), userStatsperiod94(96), userStatsperiod95(97), userStatsperiod96(98)  

ipadUserStatsTxFrames 1.3.6.1.4.1.321.100.1.9.3.1.3
Number of transmitted frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserStatsRxFrames 1.3.6.1.4.1.321.100.1.9.3.1.4
Number of received frames for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserStatsTxOctets 1.3.6.1.4.1.321.100.1.9.3.1.5
Number of transmitted octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserStatsRxOctets 1.3.6.1.4.1.321.100.1.9.3.1.6
Number of received octets for the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserStatsTxRatePeak 1.3.6.1.4.1.321.100.1.9.3.1.7
Peak throughput rate for the period (in bits/second).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserStatsTxRateAverage 1.3.6.1.4.1.321.100.1.9.3.1.8
Average throughput rate for the period (in bits/second).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUserStatsTimeStamp 1.3.6.1.4.1.321.100.1.9.3.1.9
The value of sysUpTime the last time the statistics were updated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadIPTopNStatsTable 1.3.6.1.4.1.321.100.1.9.4
IP TopN statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadIPTopNStatsEntry

ipadIPTopNStatsEntry 1.3.6.1.4.1.321.100.1.9.4.1
An entry in the user statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadIPTopNStatsEntry  

ipadIPTopNStatsIndex 1.3.6.1.4.1.321.100.1.9.4.1.1
Index into the IP TopN statistics table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadIPTopNStatsAddress 1.3.6.1.4.1.321.100.1.9.4.1.2
IP address of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

ipadIPTopNStatsTimestamp 1.3.6.1.4.1.321.100.1.9.4.1.3
Time of last IP frame for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadIPTopNStatsRxFrames 1.3.6.1.4.1.321.100.1.9.4.1.4
Number of received IP frames for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadIPTopNStatsRxOctets 1.3.6.1.4.1.321.100.1.9.4.1.5
Number of received IP octets for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadIPTopNStatsTxFrames 1.3.6.1.4.1.321.100.1.9.4.1.6
Number of transmitted IP frames for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadIPTopNStatsTxOctets 1.3.6.1.4.1.321.100.1.9.4.1.7
Number of transmitted IP octets for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadPktSwOperatingMode 1.3.6.1.4.1.321.100.1.10.1
Selects overall mode of operation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), tdm(2), monitor(3), packet(4), remoteConfig(5), profile2(6), profile3(7), profile4(8), profile5(9), profile6(10), profile7(11), profile8(12), profile9(13), profile10(14), profile11(15), profile12(16), profile13(17), profile14(18), profile15(19), profile16(20), profile17(21), profile18(22), profile19(23), profile20(24), profile21(25)  

ipadPktSwCfgTable 1.3.6.1.4.1.321.100.1.10.2
The ipad packet switch configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadPktSwCfgTableEntry

ipadPktSwCfgTableEntry 1.3.6.1.4.1.321.100.1.10.2.1
An entry in the ipad packet switch configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadPktSwCfgTableEntry  

ipadPktSwCfgService 1.3.6.1.4.1.321.100.1.10.2.1.1
The index into the packet switch configuration table; an entry in the ipad Service table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgInterfaceType 1.3.6.1.4.1.321.100.1.10.2.1.2
Network ports should be set to User Network Interface (uni) and user ports should be set to Network Interface (ni).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER uni(1), ni(2), nni(3)  

ipadPktSwCfgLnkMgmtType 1.3.6.1.4.1.321.100.1.10.2.1.3
If set to auto, the frame relay LMI type will be learned from the network side. If set to none, all DLCI must be configured.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), auto(2), ccitt(3), ansi(4), lmi(5), none(6)  

ipadPktSwCfgMaxFrameSize 1.3.6.1.4.1.321.100.1.10.2.1.4
This is the maximum frame size configured in the frame relay network.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgnN1 1.3.6.1.4.1.321.100.1.10.2.1.5
Number of keep alive requests between full status request.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgnN2 1.3.6.1.4.1.321.100.1.10.2.1.6
Number of errors from FRAD before alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgnN3 1.3.6.1.4.1.321.100.1.10.2.1.7
Number of events to sample nN2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgnT1 1.3.6.1.4.1.321.100.1.10.2.1.8
Delay before issuing a poll sequence.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgDefCIR 1.3.6.1.4.1.321.100.1.10.2.1.9
Default committed information rate in bits per second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgDefExBurst 1.3.6.1.4.1.321.100.1.10.2.1.10
Default excess burst rate in bits per second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgCIREE 1.3.6.1.4.1.321.100.1.10.2.1.11
Determines if the interface will enforce CIR and excess burst configured values.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPktSwCfgLinkInjection 1.3.6.1.4.1.321.100.1.10.2.1.12
Indicates how to process frames in excess of the CIR when congestion exists.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), standard(2), buffered(3), forced(4)  

ipadPktSwCfgAutoDiagnostic 1.3.6.1.4.1.321.100.1.10.2.1.13
Determines if the unit will put itself into diagnostic mode everytime it determines that there are no LMI received on a network service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPktSwCfgAutoDiscovery 1.3.6.1.4.1.321.100.1.10.2.1.14
Determines if the unit will learn the DLCIs from the LMMI received on this service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPktSwCfgMgmtDLCI 1.3.6.1.4.1.321.100.1.10.2.1.15
Specifies the DLCI that will be used by the unit for management information. Specifying a 0 disables this feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4096  

ipadPktSwCfgRoundTripDelaySize 1.3.6.1.4.1.321.100.1.10.2.1.16
Specifies the packet size in octets used to calculate round trip delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 16..1500  

ipadPktSwCfgRoundTripDelayRate 1.3.6.1.4.1.321.100.1.10.2.1.17
Specifies the packet rate in seconds used to calculate round trip delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..900  

ipadPktSwCfgAutoIPMgmtAddr 1.3.6.1.4.1.321.100.1.10.2.1.18
Look for DLCI (980-995) and uses its IP address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadPktSwCfgNormalTxQueueSize 1.3.6.1.4.1.321.100.1.10.2.1.19
The depth of the normal priority tx queue. This size determines the max number of low priority packets that can be queued in front of high priority traffic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

ipadPktSwCfgAddDLCI 1.3.6.1.4.1.321.100.1.10.2.1.20
Identifies a DLCI number to be added.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadPktSwCfgDeleteDLCI 1.3.6.1.4.1.321.100.1.10.2.1.21
Identifies a DLCI number to be deleted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadTrapDestTable 1.3.6.1.4.1.321.100.1.11.1
The ipad trap destination table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadTrapDestTableEntry

ipadTrapDestTableEntry 1.3.6.1.4.1.321.100.1.11.1.1
An entry in the ipad trap destination table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadTrapDestTableEntry  

ipadTrapDestIndex 1.3.6.1.4.1.321.100.1.11.1.1.1
Index into the ipad trap destination table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadTrapDestination 1.3.6.1.4.1.321.100.1.11.1.1.2
Trap destination.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadFrPortRxInvalidFramesExceeded 1.3.6.1.4.1.321.100.1.999.0.25000
This trap is sent out when an ipad frame relay port receive invalid frames alarm threshold has been exceeded.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadFrPortRxThroughputExceeded 1.3.6.1.4.1.321.100.1.999.0.25001
This trap is sent out when an ipad frame relay port receive throughput threshold has been exceeded.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadFrPortTxThroughputExceeded 1.3.6.1.4.1.321.100.1.999.0.25002
This trap is sent out when an ipad frame relay port transmit throughput threshold has been exceeded.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDLCItxCIRexceeded 1.3.6.1.4.1.321.100.1.999.0.25003
This trap is sent out when the Tx over CIR threshold has been exceeded. This threshold is the number of frames in excess of CIR.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDLCItxBEexceeded 1.3.6.1.4.1.321.100.1.999.0.25004
This trap is sent out when the Tx over Be threshold has been exceeded. This threshold is the number of frames in excess of Be.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDLCIRxCongestionExceeded 1.3.6.1.4.1.321.100.1.999.0.25005
This trap is sent out when the Rx congestion threshold has been exceeded. This threshold is the number of frames received with BECN/FECN.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadUserTxExceeded 1.3.6.1.4.1.321.100.1.999.0.25006
This trap is sent out when the Tx throughput threshold in bits per second has been exceeded. This threshold represents the number of bits for the user-selected protocol.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDlciRxBECNinCIRAlarm 1.3.6.1.4.1.321.100.1.999.0.25007
This trap is sent out when a frame with BECN set has been received within CIR.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDlciUASExceeded 1.3.6.1.4.1.321.100.1.999.0.25008
This trap is sent out when the UAS (unavailable seconds) threshold for the DLCI has been exceeded.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadserialDteDTRAlarmExists 1.3.6.1.4.1.321.100.1.999.0.25009
This trap is sent out when a DTR Loss alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1ESAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25010
This trap is sent out when an Errored Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1SESAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25011
This trap is sent out when a Severely Errored Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1LOSSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25012
This trap is sent out when a Loss of Signal Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1UASAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25013
This trap is sent out when an Unavailable Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1CSSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25014
This trap is sent out when a Controlled Slip Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1BPVSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25015
This trap is sent out when a Bipolar Violation Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1OOFSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25016
This trap is sent out when an Out of Frame Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1AISAlarmExists 1.3.6.1.4.1.321.100.1.999.0.25017
This trap is sent out when an Alarm Indication Signal alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadt1e1RASAlarmExists 1.3.6.1.4.1.321.100.1.999.0.25018
This trap is sent out when a Remote Alarm Signal alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDLCIremoteSOSAlarm 1.3.6.1.4.1.321.100.1.999.0.25019
This trap is sent when the remote unit for a DLCI senses and reports an SOS condition.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDdsLOSSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25020
This trap is sent out when a Loss of Signal Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDdsOOFSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25021
This trap is sent out when an Out of Frame Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDdsOOSSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25022
This trap is sent out when an Out of Service Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDdsFDLSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25023
This trap is sent out when a FDL error Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDdsBPVSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25024
This trap is sent out when a Bipolar Violation Seconds alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDS0HighAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25025
This trap is sent out when a high utilization alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDS0LowAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25026
This trap is sent out when a low utilization alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadHDLCRxHighAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25027
This trap is sent out when a high Rx utilization alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadHDLCRxLowAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25028
This trap is sent out when a low Rx utilization alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadHDLCTxHighAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25029
This trap is sent out when a high Tx utilization alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadHDLCTxLowAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25030
This trap is sent out when a low Tx utilization alarm is declared.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadDbuActivated 1.3.6.1.4.1.321.100.1.999.0.25031
This trap is sent out when Dial Backup becomes active.
Status: current Access: read-write
NOTIFICATION-TYPE    

ipadMiscPortSettings 1.3.6.1.4.1.321.100.1.12.1
The ipad miscellaneous port settings table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadMiscPortSettingsEntry

ipadMiscPortSettingsEntry 1.3.6.1.4.1.321.100.1.12.1.1
An entry in the ipad miscellaneous port settings table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadMiscPortSettingsEntry  

ipadMiscPortSettingsIndex 1.3.6.1.4.1.321.100.1.12.1.1.1
The MIB-II ifIndex for this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadMiscPortSettingsSerialType 1.3.6.1.4.1.321.100.1.12.1.1.2
The type of this serial port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), dce(2), dte(3)  

ipadMiscPortSettingsModemControl 1.3.6.1.4.1.321.100.1.12.1.1.3
Request the attached service to use the modem dialing control feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadMiscClearStatusCounts 1.3.6.1.4.1.321.100.1.12.2
Writing a 2 to this field will clear all status counts.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), clearAll(2)  

ipadMiscEnableServiceAware 1.3.6.1.4.1.321.100.1.12.3
Writing a 3 to this field will enable service aware statistics gathering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadMiscShdslConfigTable 1.3.6.1.4.1.321.100.1.12.4
The ipad miscellaneous SHDSL configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadMiscShdslConfigEntry

ipadMiscShdslConfigEntry 1.3.6.1.4.1.321.100.1.12.4.1
An entry in the ipad miscellaneous SHDSL configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadMiscShdslConfigEntry  

ipadMiscShdslConfigIndex 1.3.6.1.4.1.321.100.1.12.4.1.1
This object is the index into the SHDSL configuration table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadMiscShdslTerminalType 1.3.6.1.4.1.321.100.1.12.4.1.2
Selects whether the tu is a central or remote site terminal unit. Applicable to HDSL2/SHDSL only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), isXtuC(2), isXtuR(3)  

ipadMiscShdslTiming 1.3.6.1.4.1.321.100.1.12.4.1.3
Sets the timing source to synchronize the unit's internal timing generators.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER shdslTimingOther(1), shdslTimingInternal(2), shdslTimingNetwork(3), shdslTimingEqDTE(4), shdslTimingStation(5), shdslTimingPort1(6), shdslTimingPort2(7)  

ipadMiscShdslStationInTiming 1.3.6.1.4.1.321.100.1.12.4.1.4
Selects the input timing if SHDSLTiming is set to Station.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER shdslStationInTimingOther(1), shdslStationInTimingNX64(2), shdslStationInTiming1544(3), shdslStationInTiming2048(4)  

ipadMiscShdslStationTimingNxMultiple 1.3.6.1.4.1.321.100.1.12.4.1.5
Selects the N-multiple when Station Input Timing is set to either NX56 or NX65.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadMiscShdslAutomaticRetrain 1.3.6.1.4.1.321.100.1.12.4.1.6
Enable or disable automatic line retraining when needed. Enable is the default. Disable is used for PSD measurement.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadMiscShdslStatusTable 1.3.6.1.4.1.321.100.1.12.5
The ipad miscellaneous SHDSL status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadMiscShdslStatusEntry

ipadMiscShdslStatusEntry 1.3.6.1.4.1.321.100.1.12.5.1
An entry in the ipad miscellaneous SHDSL status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadMiscShdslStatusEntry  

ipadMiscShdslStatusIndex 1.3.6.1.4.1.321.100.1.12.5.1.1
This object is the index into the SHDSL configuration table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadMiscShdslConnectionStatus 1.3.6.1.4.1.321.100.1.12.5.1.2
This object displays the connection status of Wire Pair 1 of an SHDSL connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), handshake(2), training(3), data(4)  

ipadMiscShdslDetailedConnectionStatus 1.3.6.1.4.1.321.100.1.12.5.1.3
This object displays the detailed connection status of Wire Pair 1 of an SHDSL connection.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

ipadMiscShdslEOCInMessages 1.3.6.1.4.1.321.100.1.12.5.1.4
This object displays the number of EOC messages received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadMiscShdslEOCOutMessages 1.3.6.1.4.1.321.100.1.12.5.1.5
This object displays the number of EOC messages transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadMiscShdslConnectionStatusPair2 1.3.6.1.4.1.321.100.1.12.5.1.6
This object displays the connection status of Wire Pair 2 of an SHDSL connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), handshake(2), training(3), data(4)  

ipadMiscShdslDetailedConnectionStatusPair2 1.3.6.1.4.1.321.100.1.12.5.1.7
This object displays the detailed connection status of Wire Pair 2 of an SHDSL connection.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

ipadMiscEnableSupervisoryPort 1.3.6.1.4.1.321.100.1.12.6
Writing a 2 to this field will disable VT100 and telnet. Writing a 3 to this field will enable VT100 and telnet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadMiscEnableButtons 1.3.6.1.4.1.321.100.1.12.7
Writing a 2 to this field will disable the buttons. Writing a 3 to this field will enable the buttons.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadMiscBootupConsoleAvail 1.3.6.1.4.1.321.100.1.12.8
Writing a 2 to this field will disable the console port for diagnostic messages. Writing a 3 to this field will enable these messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadMiscEnableLEDs 1.3.6.1.4.1.321.100.1.12.9
Writing a 2 to this field will disable the LEDs. Writing a 3 to this field will enable the LEDs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadMiscDisableLAN 1.3.6.1.4.1.321.100.1.12.10
This parameter defines the setup of the Ethernet LAN port. disable(2) - Disable the Ethernet LAN Port. enable(3) - Enable the Ethernet LAN port and auto-negotiate speed and duplex. half10(4) - Enable the Ethernet LAN port and manually set to 10 Mbps and half-duplex. full10(5) - Enable the Ethernet LAN port and manually set to 10 Mbps and full-duplex. half100(6) - Enable the Ethernet LAN port and manually set to 100 Mbps and half-duplex. full100(7) - Enable the Ethernet LAN port and manually set to 100 Mbps and full-duplex.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3), half10(4), full10(5), half100(6), full100(7)  

ipadMiscLANStatus 1.3.6.1.4.1.321.100.1.12.11
This parameter defines the setup of the Ethernet LAN port. down(1) - Port has not negotiated. half10(2) - Port negotiated 10 Mbps and half-duplex. full10(3) - Port negotiated 10 Mbps and full-duplex. half100(4) - Port negotiated 100 Mbps and half-duplex. full100(5) - Port negotiated 100 Mbps and full-duplex. na(6) - Not Applicable (speed/duplex manually set).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), half10(2), full10(3), half100(4), full100(5), na(6)  

ipadSoftKeyTable 1.3.6.1.4.1.321.100.1.14.1
Table of software keys.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadSoftKeyTableEntry

ipadSoftKeyTableEntry 1.3.6.1.4.1.321.100.1.14.1.1
An entry in the software key table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadSoftKeyTableEntry  

ipadSoftKeyIndex 1.3.6.1.4.1.321.100.1.14.1.1.1
Index into the ipad software key table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSoftKeyAcronym 1.3.6.1.4.1.321.100.1.14.1.1.2
Three-letter acronym for software key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..3)  

ipadSoftKeyDescription 1.3.6.1.4.1.321.100.1.14.1.1.3
Description, if available, of this software key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

ipadSoftKeyExpirationDate 1.3.6.1.4.1.321.100.1.14.1.1.4
Expiration date of this software key in the format YY/MM/DD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

ipadSoftKeyEntry 1.3.6.1.4.1.321.100.1.14.2
Writing a software key will enable that feature (assuming a correct and valid key is entered).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

ipadTCPServerEnable 1.3.6.1.4.1.321.100.1.15.1
Enables/disables the TCP Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadTCPServerConnTable 1.3.6.1.4.1.321.100.1.15.2
Table of TCP Server connections.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadTCPServerConnTableEntry

ipadTCPServerConnTableEntry 1.3.6.1.4.1.321.100.1.15.2.1
An entry in the TCP Server connection table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadTCPServerConnTableEntry  

ipadTCPServerConnIndex 1.3.6.1.4.1.321.100.1.15.2.1.1
Index into the ipad TCP Server Connection table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadTCPServerConnEndpoint 1.3.6.1.4.1.321.100.1.15.2.1.2
Identifies the endpoint for this connection.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

ipadTCPServerConnLocalPort 1.3.6.1.4.1.321.100.1.15.2.1.3
Identifies the TCP port for this connection (default: 2000).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

ipadTCPServerConnEnableEntry 1.3.6.1.4.1.321.100.1.15.2.1.4
Enables or disables this entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadTCPServerAddConnEntry 1.3.6.1.4.1.321.100.1.15.3
Writing addnew(2) to this field causes a new (blank) connection to be appended to the TCP Server Table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), addnew(2)  

ipadTCPServerDeleteConnEntry 1.3.6.1.4.1.321.100.1.15.4
Identifies a connection table entry to be deleted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadTCPServerHostAccessTable 1.3.6.1.4.1.321.100.1.15.5
Table of TCP Server IP Host Access List.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadTCPServerHostAccessTableEntry

ipadTCPServerHostAccessTableEntry 1.3.6.1.4.1.321.100.1.15.5.1
An entry in the TCP Server Host Access List table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadTCPServerHostAccessTableEntry  

ipadTCPServerHostAccessIndex 1.3.6.1.4.1.321.100.1.15.5.1.1
Index into the ipad trap destination table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadTCPServerHostAccessIPAddr 1.3.6.1.4.1.321.100.1.15.5.1.2
Trap destination.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadSCADAConfigTable 1.3.6.1.4.1.321.100.1.16.1
The SCADA config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadSCADAConfigTableEntry

ipadSCADAConfigTableEntry 1.3.6.1.4.1.321.100.1.16.1.1
An entry in the SCADA config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadSCADAConfigTableEntry  

ipadSCADACfgIndex 1.3.6.1.4.1.321.100.1.16.1.1.1
The index for SCADA config table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADACfgMessageSize 1.3.6.1.4.1.321.100.1.16.1.1.2
The SCADA message size.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadSCADACfgIdleCharDelay 1.3.6.1.4.1.321.100.1.16.1.1.3
The SCADA idle character delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadSCADACfgInputTerminator 1.3.6.1.4.1.321.100.1.16.1.1.4
The SCADA input message terminator.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadSCADACfgAddDevLst 1.3.6.1.4.1.321.100.1.16.1.1.5
Appends an entry to the SCADA device list table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), addnew(2)  

ipadSCADACfgDeleteDevLst 1.3.6.1.4.1.321.100.1.16.1.1.6
Deletes an entry in the SCADA device list table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadSCADACfgDataDirection 1.3.6.1.4.1.321.100.1.16.1.1.7
Data Direction enables for SCADA configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), both(2), output(3), input(4)  

ipadSCADACfgProtocol 1.3.6.1.4.1.321.100.1.16.1.1.8
Configured SCADA Protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), async(2), syncVancommHost(3), syncVancommRTU(4)  

ipadSCADACfgLoopback 1.3.6.1.4.1.321.100.1.16.1.1.9
Loopback allows user to loop data to either Network, Serial Port or both.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), network(2), port(3), both(4)  

ipadSCADAStatsTable 1.3.6.1.4.1.321.100.1.17.1
The SCADA statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadSCADAStatsTableEntry

ipadSCADAStatsTableEntry 1.3.6.1.4.1.321.100.1.17.1.1
An entry in the SCADA statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadSCADAStatsTableEntry  

ipadSCADAStatsIndex 1.3.6.1.4.1.321.100.1.17.1.1.1
The index for SCADA Statistics Table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADAStatsTxChars 1.3.6.1.4.1.321.100.1.17.1.1.2
The number of chracters transmitted through SCADA port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADAStatsRxChars 1.3.6.1.4.1.321.100.1.17.1.1.3
The number of chracters received through SCADA port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADAStatsTxMsgs 1.3.6.1.4.1.321.100.1.17.1.1.4
The number of messages transmitted through SCADA port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADAStatsRxMsgs 1.3.6.1.4.1.321.100.1.17.1.1.5
The number of messages received through SCADA port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADAStatsRxParityErrors 1.3.6.1.4.1.321.100.1.17.1.1.6
The number of parity errors received from SCADA port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADAStatsRxFramingErrors 1.3.6.1.4.1.321.100.1.17.1.1.7
The number of framming errors received from SCADA port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADAStatsClear 1.3.6.1.4.1.321.100.1.17.1.1.8
Writing a value of ipadSCADAStatsClearNow(2) to this field causes all existing stats to be cleared immediately.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipadSCADAStatsClearOther(1), ipadSCADAStatsClearNow(2)  

ipadSCADADevLstTable 1.3.6.1.4.1.321.100.1.18.1
The SCADA device list table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadSCADADevLstTableEntry

ipadSCADADevLstTableEntry 1.3.6.1.4.1.321.100.1.18.1.1
An entry in the SCADA device list table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadSCADADevLstTableEntry  

ipadSCADADevLstIndex 1.3.6.1.4.1.321.100.1.18.1.1.1
The index for SCADA device list table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADADevLstDevIndex 1.3.6.1.4.1.321.100.1.18.1.1.2
The index of device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSCADADevLstEndpointName 1.3.6.1.4.1.321.100.1.18.1.1.3
The name of the endpoint.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

ipadSCADADevLstEntryStatus 1.3.6.1.4.1.321.100.1.18.1.1.4
The disabled or dnabled status of the entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadDS0ConfigTable 1.3.6.1.4.1.321.100.1.19.1
The ipad DS0 Utilization Monitor Config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDS0ConfigTableEntry

ipadDS0ConfigTableEntry 1.3.6.1.4.1.321.100.1.19.1.1
An entry in the ipad DS0 Utilization Monitor Config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDS0ConfigTableEntry  

ipadDS0ConfigIndex 1.3.6.1.4.1.321.100.1.19.1.1.1
Index into the DS0 Utilization Monitor Config table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDS0ConfigNumberDS0 1.3.6.1.4.1.321.100.1.19.1.1.2
Number of DS0's monitored by this table entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDS0ConfigResetTimer 1.3.6.1.4.1.321.100.1.19.1.1.3
Number of contiguous seconds a utilization alarm must not be present before the alarm condition is automatically reset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDS0ConfigHighUtil 1.3.6.1.4.1.321.100.1.19.1.1.4
What the user considers a high DS0 utilization for this entry. Utilization is expressed as a percentage.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDS0ConfigHighUtilThreshold 1.3.6.1.4.1.321.100.1.19.1.1.5
Number of seconds a high utilization condition must be present within 15 minutes before an alarm condition is declared.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDS0ConfigHighUtilStatus 1.3.6.1.4.1.321.100.1.19.1.1.6
Indicates if a high utilization condition exists.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), notExist(2), exists(3)  

ipadDS0ConfigHighUtilCount 1.3.6.1.4.1.321.100.1.19.1.1.7
The number of seconds in the past 15 minutes that have been greater than or equal to the high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDS0ConfigHighUtilAlarm 1.3.6.1.4.1.321.100.1.19.1.1.8
Indicates if the high utilization alarm threshold is exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadDS0ConfigLowUtil 1.3.6.1.4.1.321.100.1.19.1.1.9
What the user considers an end-of-day low DS0 utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the low utilization alarm is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDS0ConfigLowUtilAlarm 1.3.6.1.4.1.321.100.1.19.1.1.10
Indicates if the low utilization alarm is declared.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadDS0ConfigReset 1.3.6.1.4.1.321.100.1.19.1.1.11
The set values perform the following actions: clearAlarms(2) - Clears any active DS0 utilization alarms and counts clearHistory(3) - Clears DS0 utilization history tables.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), clearAlarms(2), clearHistory(3)  

ipadDS0Hist24Table 1.3.6.1.4.1.321.100.1.20.1
The ipad DS0 Utilization Monitor 24-Hour History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDS0Hist24TableEntry

ipadDS0Hist24TableEntry 1.3.6.1.4.1.321.100.1.20.1.1
An entry in the ipad DS0 Utilization Monitor 24-Hour History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDS0Hist24TableEntry  

ipadDS0Hist24Index 1.3.6.1.4.1.321.100.1.20.1.1.1
Index into the DS0 Utilization Monitor 24-Hour History table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDS0Hist24HistoricalIndex 1.3.6.1.4.1.321.100.1.20.1.1.2
Historical index into the DS0 Utilization Monitor 24-Hour History table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER statSummary(1), statCurrent(2), statPeriod1(3), statPeriod2(4), statPeriod3(5), statPeriod4(6), statPeriod5(7), statPeriod6(8), statPeriod7(9), statPeriod8(10), statPeriod9(11), statPeriod10(12), statPeriod11(13), statPeriod12(14), statPeriod13(15), statPeriod14(16), statPeriod15(17), statPeriod16(18), statPeriod17(19), statPeriod18(20), statPeriod19(21), statPeriod20(22), statPeriod21(23), statPeriod22(24), statPeriod23(25), statPeriod24(26), statPeriod25(27), statPeriod26(28), statPeriod27(29), statPeriod28(30), statPeriod29(31), statPeriod30(32), statPeriod31(33), statPeriod32(34), statPeriod33(35), statPeriod34(36), statPeriod35(37), statPeriod36(38), statPeriod37(39), statPeriod38(40), statPeriod39(41), statPeriod40(42), statPeriod41(43), statPeriod42(44), statPeriod43(45), statPeriod44(46), statPeriod45(47), statPeriod46(48), statPeriod47(49), statPeriod48(50), statPeriod49(51), statPeriod50(52), statPeriod51(53), statPeriod52(54), statPeriod53(55), statPeriod54(56), statPeriod55(57), statPeriod56(58), statPeriod57(59), statPeriod58(60), statPeriod59(61), statPeriod60(62), statPeriod61(63), statPeriod62(64), statPeriod63(65), statPeriod64(66), statPeriod65(67), statPeriod66(68), statPeriod67(69), statPeriod68(70), statPeriod69(71), statPeriod70(72), statPeriod71(73), statPeriod72(74), statPeriod73(75), statPeriod74(76), statPeriod75(77), statPeriod76(78), statPeriod77(79), statPeriod78(80), statPeriod79(81), statPeriod80(82), statPeriod81(83), statPeriod82(84), statPeriod83(85), statPeriod84(86), statPeriod85(87), statPeriod86(88), statPeriod87(89), statPeriod88(90), statPeriod89(91), statPeriod90(92), statPeriod91(93), statPeriod92(94), statPeriod93(95), statPeriod94(96), statPeriod95(97), statPeriod96(98)  

ipadDS0Hist24Timestamp 1.3.6.1.4.1.321.100.1.20.1.1.3
SysUpTime when the utilization interval completed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadDS0Hist24HighUtilSeconds 1.3.6.1.4.1.321.100.1.20.1.1.4
The number of seconds in the interval that have been greater than or equal to the high utilization parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDS0Hist24Utilization 1.3.6.1.4.1.321.100.1.20.1.1.5
The percent of DS0's utilized over the given interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDS0Hist30Table 1.3.6.1.4.1.321.100.1.21.1
The ipad DS0 Utilization Monitor 30-Day History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDS0Hist30TableEntry

ipadDS0Hist30TableEntry 1.3.6.1.4.1.321.100.1.21.1.1
An entry in the ipad DS0 Utilization Monitor 30-Day History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDS0Hist30TableEntry  

ipadDS0Hist30Index 1.3.6.1.4.1.321.100.1.21.1.1.1
Index into the DS0 Utilization Monitor 30-Day History table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDS0Hist30HistoricalIndex 1.3.6.1.4.1.321.100.1.21.1.1.2
Historical index into the DS0 Utilization Monitor 30-Day History table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER statSummary(1), statDay1(2), statDay2(3), statDay3(4), statDay4(5), statDay5(6), statDay6(7), statDay7(8), statDay8(9), statDay9(10), statDay10(11), statDay11(12), statDay12(13), statDay13(14), statDay14(15), statDay15(16), statDay16(17), statDay17(18), statDay18(19), statDay19(20), statDay20(21), statDay21(22), statDay22(23), statDay23(24), statDay24(25), statDay25(26), statDay26(27), statDay27(28), statDay28(29), statDay29(30), statDay30(31)  

ipadDS0Hist30Timestamp 1.3.6.1.4.1.321.100.1.21.1.1.3
SysUpTime when the utilization interval completed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadDS0Hist30HighUtilSeconds 1.3.6.1.4.1.321.100.1.21.1.1.4
The number of seconds in the interval that have been greater than or equal to the high utilization parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDS0Hist30Utilization 1.3.6.1.4.1.321.100.1.21.1.1.5
The percent of DS0's utilized over the given interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigTable 1.3.6.1.4.1.321.100.1.22.1
The ipad HDLC Utilization Monitor Config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadHDLCConfigTableEntry

ipadHDLCConfigTableEntry 1.3.6.1.4.1.321.100.1.22.1.1
An entry in the ipad HDLC Utilization Monitor Config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadHDLCConfigTableEntry  

ipadHDLCConfigIndex 1.3.6.1.4.1.321.100.1.22.1.1.1
Index into the HDLC Utilization Monitor Config table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigService 1.3.6.1.4.1.321.100.1.22.1.1.2
Service the HDLC utilization monitor is attached. 0 = Disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigServiceBPS 1.3.6.1.4.1.321.100.1.22.1.1.3
Service bit rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigResetTimer 1.3.6.1.4.1.321.100.1.22.1.1.4
Number of contiguous seconds a utilization alarm must not be present before the alarm condition is automatically reset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigRxHighUtil 1.3.6.1.4.1.321.100.1.22.1.1.5
What the user considers a high Rx HDLC utilization for this entry. Utilization is expressed as a percentage.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigRxHighUtilThreshold 1.3.6.1.4.1.321.100.1.22.1.1.6
Number of seconds a Rx high utilization condition must be present within 15 minutes before an alarm condition is declared.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigRxHighUtilStatus 1.3.6.1.4.1.321.100.1.22.1.1.7
Indicates if a Rx high utilization condition exists.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), notExist(2), exists(3)  

ipadHDLCConfigRxHighUtilCount 1.3.6.1.4.1.321.100.1.22.1.1.8
The number of seconds in the past 15 minutes that have been greater than or equal to the Rx high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigRxHighUtilAlarm 1.3.6.1.4.1.321.100.1.22.1.1.9
Indicates if the Rx high utilization alarm threshold is exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadHDLCConfigRxLowUtil 1.3.6.1.4.1.321.100.1.22.1.1.10
What the user considers an end-of-day low Rx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the Rx low utilization alarm is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigRxLowUtilAlarm 1.3.6.1.4.1.321.100.1.22.1.1.11
Indicates if the Rx low utilization alarm is declared.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadHDLCConfigTxHighUtil 1.3.6.1.4.1.321.100.1.22.1.1.12
What the user considers a high Tx HDLC utilization for this entry. Utilization is expressed as a percentage.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigTxHighUtilThreshold 1.3.6.1.4.1.321.100.1.22.1.1.13
Number of seconds a Tx high utilization condition must be present within 15 minutes before an alarm condition is declared.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigTxHighUtilStatus 1.3.6.1.4.1.321.100.1.22.1.1.14
Indicates if a Tx high utilization condition exists.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), notExist(2), exists(3)  

ipadHDLCConfigTxHighUtilCount 1.3.6.1.4.1.321.100.1.22.1.1.15
The number of seconds in the past 15 minutes that have been greater than or equal to the Tx high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigTxHighUtilAlarm 1.3.6.1.4.1.321.100.1.22.1.1.16
Indicates if the Tx high utilization alarm threshold is exceeded.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadHDLCConfigTxLowUtil 1.3.6.1.4.1.321.100.1.22.1.1.17
What the user considers an end-of-day low Tx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the Tx low utilization alarm is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadHDLCConfigTxLowUtilAlarm 1.3.6.1.4.1.321.100.1.22.1.1.18
Indicates if the Tx low utilization alarm is declared.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), noAlarm(2), thresholdExceeded(3)  

ipadHDLCConfigReset 1.3.6.1.4.1.321.100.1.22.1.1.19
The set values perform the following actions: clearAlarms(2) - Clears any active HDLC utilization alarms and counts clearHistory(3) - Clears HDLC utilization history tables.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), clearAlarms(2), clearHistory(3)  

ipadHDLCHist24Table 1.3.6.1.4.1.321.100.1.23.1
The ipad HDLC Utilization Monitor 24-Hour History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadHDLCHist24TableEntry

ipadHDLCHist24TableEntry 1.3.6.1.4.1.321.100.1.23.1.1
An entry in the ipad HDLC Utilization Monitor 24-Hour History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadHDLCHist24TableEntry  

ipadHDLCHist24Index 1.3.6.1.4.1.321.100.1.23.1.1.1
Index into the HDLC Utilization Monitor 24-Hour History table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist24HistoricalIndex 1.3.6.1.4.1.321.100.1.23.1.1.2
Historical index into the HDLC Utilization Monitor 24-Hour History table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER statSummary(1), statCurrent(2), statPeriod1(3), statPeriod2(4), statPeriod3(5), statPeriod4(6), statPeriod5(7), statPeriod6(8), statPeriod7(9), statPeriod8(10), statPeriod9(11), statPeriod10(12), statPeriod11(13), statPeriod12(14), statPeriod13(15), statPeriod14(16), statPeriod15(17), statPeriod16(18), statPeriod17(19), statPeriod18(20), statPeriod19(21), statPeriod20(22), statPeriod21(23), statPeriod22(24), statPeriod23(25), statPeriod24(26), statPeriod25(27), statPeriod26(28), statPeriod27(29), statPeriod28(30), statPeriod29(31), statPeriod30(32), statPeriod31(33), statPeriod32(34), statPeriod33(35), statPeriod34(36), statPeriod35(37), statPeriod36(38), statPeriod37(39), statPeriod38(40), statPeriod39(41), statPeriod40(42), statPeriod41(43), statPeriod42(44), statPeriod43(45), statPeriod44(46), statPeriod45(47), statPeriod46(48), statPeriod47(49), statPeriod48(50), statPeriod49(51), statPeriod50(52), statPeriod51(53), statPeriod52(54), statPeriod53(55), statPeriod54(56), statPeriod55(57), statPeriod56(58), statPeriod57(59), statPeriod58(60), statPeriod59(61), statPeriod60(62), statPeriod61(63), statPeriod62(64), statPeriod63(65), statPeriod64(66), statPeriod65(67), statPeriod66(68), statPeriod67(69), statPeriod68(70), statPeriod69(71), statPeriod70(72), statPeriod71(73), statPeriod72(74), statPeriod73(75), statPeriod74(76), statPeriod75(77), statPeriod76(78), statPeriod77(79), statPeriod78(80), statPeriod79(81), statPeriod80(82), statPeriod81(83), statPeriod82(84), statPeriod83(85), statPeriod84(86), statPeriod85(87), statPeriod86(88), statPeriod87(89), statPeriod88(90), statPeriod89(91), statPeriod90(92), statPeriod91(93), statPeriod92(94), statPeriod93(95), statPeriod94(96), statPeriod95(97), statPeriod96(98)  

ipadHDLCHist24Timestamp 1.3.6.1.4.1.321.100.1.23.1.1.3
SysUpTime when the utilization interval completed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadHDLCHist24RxHighUtilSeconds 1.3.6.1.4.1.321.100.1.23.1.1.4
The number of seconds in the interval that have been greater than or equal to the Rx high utilization parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist24RxUtilization 1.3.6.1.4.1.321.100.1.23.1.1.5
The percent of Rx HDLC bandwidth utilized over the given interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist24TxHighUtilSeconds 1.3.6.1.4.1.321.100.1.23.1.1.6
The number of seconds in the interval that have been greater than or equal to the Tx high utilization parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist24TxUtilization 1.3.6.1.4.1.321.100.1.23.1.1.7
The percent of Tx HDLC bandwidth utilized over the given interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist30Table 1.3.6.1.4.1.321.100.1.24.1
The ipad HDLC Utilization Monitor 30-Day History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadHDLCHist30TableEntry

ipadHDLCHist30TableEntry 1.3.6.1.4.1.321.100.1.24.1.1
An entry in the ipad HDLC Utilization Monitor 30-Day History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadHDLCHist30TableEntry  

ipadHDLCHist30Index 1.3.6.1.4.1.321.100.1.24.1.1.1
Index into the HDLC Utilization Monitor 30-Day History table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist30HistoricalIndex 1.3.6.1.4.1.321.100.1.24.1.1.2
Historical index into the HDLC Utilization Monitor 30-Day History table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER statSummary(1), statDay1(2), statDay2(3), statDay3(4), statDay4(5), statDay5(6), statDay6(7), statDay7(8), statDay8(9), statDay9(10), statDay10(11), statDay11(12), statDay12(13), statDay13(14), statDay14(15), statDay15(16), statDay16(17), statDay17(18), statDay18(19), statDay19(20), statDay20(21), statDay21(22), statDay22(23), statDay23(24), statDay24(25), statDay25(26), statDay26(27), statDay27(28), statDay28(29), statDay29(30), statDay30(31)  

ipadHDLCHist30Timestamp 1.3.6.1.4.1.321.100.1.24.1.1.3
SysUpTime when the utilization interval completed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadHDLCHist30RxHighUtilSeconds 1.3.6.1.4.1.321.100.1.24.1.1.4
The number of seconds in the interval that have been greater than or equal to the Rx high utilization parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist30RxUtilization 1.3.6.1.4.1.321.100.1.24.1.1.5
The percent of Rx HDLC bandwidth utilized over the given interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist30TxHighUtilSeconds 1.3.6.1.4.1.321.100.1.24.1.1.6
The number of seconds in the interval that have been greater than or equal to the Tx high utilization parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadHDLCHist30TxUtilization 1.3.6.1.4.1.321.100.1.24.1.1.7
The percent of Tx HDLC bandwidth utilized over the given interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadSmtpMailServer 1.3.6.1.4.1.321.100.1.29.1
IP Address of the .
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadSmtpDomainName 1.3.6.1.4.1.321.100.1.29.2
Domain Name of the SMTP client.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipadSmtpMailFrom 1.3.6.1.4.1.321.100.1.29.3
Name of the SMTP client, is used in the From section of the email.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipadSmtpRecipient1 1.3.6.1.4.1.321.100.1.29.4
Destination for the email.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipadSmtpRecipient2 1.3.6.1.4.1.321.100.1.29.5
Destination for the email.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipadSmtpRecipient3 1.3.6.1.4.1.321.100.1.29.6
Destination for the email.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipadSmtpRecipient4 1.3.6.1.4.1.321.100.1.29.7
Destination for the email.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipadSmtpRecipient5 1.3.6.1.4.1.321.100.1.29.8
Destination for the email.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipadEncryptionEnable 1.3.6.1.4.1.321.100.1.30.1
Allow disabling encryption.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadEncryptionStartupKey 1.3.6.1.4.1.321.100.1.30.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionStartupKeyConfirm 1.3.6.1.4.1.321.100.1.30.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionType 1.3.6.1.4.1.321.100.1.30.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER blowfish(1), des(2), triple-des(3)  

ipadEncryptionKey1 1.3.6.1.4.1.321.100.1.30.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey2 1.3.6.1.4.1.321.100.1.30.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey3 1.3.6.1.4.1.321.100.1.30.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey4 1.3.6.1.4.1.321.100.1.30.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey5 1.3.6.1.4.1.321.100.1.30.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey6 1.3.6.1.4.1.321.100.1.30.10
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey7 1.3.6.1.4.1.321.100.1.30.11
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey8 1.3.6.1.4.1.321.100.1.30.12
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey9 1.3.6.1.4.1.321.100.1.30.13
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKey10 1.3.6.1.4.1.321.100.1.30.14
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..56)  

ipadEncryptionKeyLife 1.3.6.1.4.1.321.100.1.30.15
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadAutoLearnDS0Table 1.3.6.1.4.1.321.100.1.31.1
The ipad Auto Learn DS0 Config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAutoLearnDS0TableEntry

ipadAutoLearnDS0TableEntry 1.3.6.1.4.1.321.100.1.31.1.1
An entry in the ipad Auto Learn DS0 Config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAutoLearnDS0TableEntry  

ipadAutoLearnDS0Index 1.3.6.1.4.1.321.100.1.31.1.1.1
The MIB-II ifIndex into the Auto Learn DS0 Config table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAutoLearnDS0Boot 1.3.6.1.4.1.321.100.1.31.1.1.2
Select when to automatically learn DS0 assignments: disable - Do not automatically learn DS0s enable - Learn on boot carrierDown - Learn on boot and while the ifIndex carrier is down serviceDown - Learn on boot and while the first service on ifIndex is down
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3), carrierDown(4), serviceDown(5)  

ipadAutoLearnDS0Rate 1.3.6.1.4.1.321.100.1.31.1.1.3
Select the rate of the learned DS0's.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), auto(2), learnAs56K(3), learnAs64K(4), learnAsVoice(5)  

ipadAutoLearnDS0Command 1.3.6.1.4.1.321.100.1.31.1.1.4
The set values perform the following actions: learnNow(2) - Attempt to learn the active DS0's now.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), learnNow(2)  

ipadUnitAccessTable 1.3.6.1.4.1.321.100.1.32.1
The ipad Unit Access table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadUnitAccessTableEntry

ipadUnitAccessTableEntry 1.3.6.1.4.1.321.100.1.32.1.1
An entry in the ipad Unit Access table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadUnitAccessTableEntry  

ipadUnitAccessIndex 1.3.6.1.4.1.321.100.1.32.1.1.1
The MIB-II Index into the Unit Access table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadUnitAccessIpa 1.3.6.1.4.1.321.100.1.32.1.1.2
IP Address of Source to allow Unit Access.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadUnitAccessMask 1.3.6.1.4.1.321.100.1.32.1.1.3
Mask of Source to allow Unit Access.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadTFTPDownloadServerIpa 1.3.6.1.4.1.321.100.1.33.1
TFTP Server IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadTFTPDownloadFileName 1.3.6.1.4.1.321.100.1.33.2
TFTP Filename to Download or Upload.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

ipadTFTPDownloadAction 1.3.6.1.4.1.321.100.1.33.3
TFTP Action to be performed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER getfile(1), putfile(2), abort(3), idle(4)  

ipadTFTPDownloadStatus 1.3.6.1.4.1.321.100.1.33.4
TFTP current status of action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), gettingfile(2), puttingfile(3), aborting(4), successful(5), invalidFileName(6), fileAccessFailed(7), invalidFile(8)  

ipadDLMConfig 1.3.6.1.4.1.321.100.1.34.1
OBJECT IDENTIFIER    

ipadDLMConfigMode 1.3.6.1.4.1.321.100.1.34.1.1
Data Link Monitor on/off switch. Toggles mode from analyze (static) to live (capture).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), analyze(2), live(3)  

ipadDLMConfigBufferManagement 1.3.6.1.4.1.321.100.1.34.1.2
The DLM has a buffer of n messages. Settings this object to wrap(2) allows the buffer to wrap around and be a continous buffer. stopOnFull(3) forces the capture of packets to stop once the end of the buffer is reached.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), wrap(2), stopOnFull(3)  

ipadDLMTable 1.3.6.1.4.1.321.100.1.34.2
The ipad Data Line Monitor configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDLMTableEntry

ipadDLMTableEntry 1.3.6.1.4.1.321.100.1.34.2.1
An entry in the ipad DLM config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDLMTableEntry  

ipadDLMServiceIndex 1.3.6.1.4.1.321.100.1.34.2.1.1
The service index into the DLM table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLMEnable 1.3.6.1.4.1.321.100.1.34.2.1.2
Enable/Disable the DLM on the specified service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadDLMTxRxFilter 1.3.6.1.4.1.321.100.1.34.2.1.3
Allows the user to capture only received, transmit, or both.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), all(2), transmitOnly(3), receiveOnly(4)  

ipadDLMPatternEnable 1.3.6.1.4.1.321.100.1.34.2.1.4
Enable/Disable the search for a specific pattern.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadDLMPattern 1.3.6.1.4.1.321.100.1.34.2.1.5
The pattern to search for in the captured packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLMPatternMask 1.3.6.1.4.1.321.100.1.34.2.1.6
The mask to use with ipadDLMPattern to search for in the captured packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadDLMPatternOffset 1.3.6.1.4.1.321.100.1.34.2.1.7
The offset into the packet to search for the pattern.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

ipadDLMPacketTable 1.3.6.1.4.1.321.100.1.34.3
The ipad Data Link Monitor packet table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadDLMPacketTableEntry

ipadDLMPacketTableEntry 1.3.6.1.4.1.321.100.1.34.3.1
An entry in the ipad DLM packet table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadDLMPacketTableEntry  

ipadDLMPacketIndex 1.3.6.1.4.1.321.100.1.34.3.1.1
The service index into the DLM table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLMPacketServiceIndex 1.3.6.1.4.1.321.100.1.34.3.1.2
The service index the packet was captured on.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLMPacketTimestamp 1.3.6.1.4.1.321.100.1.34.3.1.3
The time that the packet was captured.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadDLMPacketDataDirection 1.3.6.1.4.1.321.100.1.34.3.1.4
The direction the data was goin in respect to the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), transmit(2), receive(3)  

ipadDLMPacketSize 1.3.6.1.4.1.321.100.1.34.3.1.5
The size of the captured packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadDLMPacketData 1.3.6.1.4.1.321.100.1.34.3.1.6
The contents of the first 32 bytes of the captured packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

ipadOrigPingCommand 1.3.6.1.4.1.321.100.1.35.1
Action command to start/stop sending PING messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), stop(2), start(3), clearStats(4)  

ipadOrigPingDestIPAddr 1.3.6.1.4.1.321.100.1.35.2
Destination IP address of sent PING request messages.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipadOrigPingTimeout 1.3.6.1.4.1.321.100.1.35.3
Number of seconds to wait for a reply to a PING request message.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadOrigPingSize 1.3.6.1.4.1.321.100.1.35.4
Number of bytes in a PING request message data field.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadOrigPingToSend 1.3.6.1.4.1.321.100.1.35.5
Number of PING request messages to send.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadOrigPingSent 1.3.6.1.4.1.321.100.1.35.6
Number of PING request messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadOrigPingReplies 1.3.6.1.4.1.321.100.1.35.7
Number of PING response messages received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadOrigPingDelayMin 1.3.6.1.4.1.321.100.1.35.8
Minimum PING round trip delay in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadOrigPingDelayAvg 1.3.6.1.4.1.321.100.1.35.9
Average PING round trip delay in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadOrigPingDelayMax 1.3.6.1.4.1.321.100.1.35.10
Maximum PING round trip delay in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadOrigPingReport 1.3.6.1.4.1.321.100.1.35.11
ASCII status report of originate PING activity.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

ipadOrigPingExceptReport 1.3.6.1.4.1.321.100.1.35.12
ASCII status report of last originate PING exception received.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor