INTEL-S500-MIB

Imported modules

RFC1155-SMI	RFC1213-MIB	INTEL-GEN-MIB
RFC-1212	RFC-1215

Imported symbols

IpAddress	TimeTicks	Counter
DisplayString	mib2ext	OBJECT-TYPE
TRAP-TYPE

Defined Types

PortInfoEntry
SEQUENCE
	portInfoChassisIndex	INTEGER
	portInfoModuleIndex	INTEGER
	portInfoIndex	INTEGER
	portInfoType	INTEGER

PortConfEntry
SEQUENCE
	portConfChassisIndex	INTEGER
	portConfModuleIndex	INTEGER
	portConfIndex	INTEGER
	portConfDescr	DisplayString
	portConfLocation	DisplayString
	portConfConfigSwitchMode	INTEGER
	portConfFlowControl	INTEGER
	portConfSpeedSupported	INTEGER
	portConfDuplexSupported	INTEGER
	portConfConfigSpeed	INTEGER
	portConfConfigDuplex	INTEGER
	portConfConfigAutoNeg	INTEGER
	portConfSpeed	INTEGER
	portConfDuplex	INTEGER
	portConfAutoNeg	INTEGER
	portConfSwitchMode	INTEGER
	portConfTrunkSupported	INTEGER
	portConfTrunkConfig	INTEGER
	portConfTrunkName	DisplayString
	portConfMirrorSupported	INTEGER
	portConfMirrorConfig	INTEGER
	portConfVlanSupported	INTEGER

TxStatEntry
SEQUENCE
	txStatIndex	INTEGER
	txUCPkts64Octets	Counter
	txUCPkts65To127Octets	Counter
	txUCPkts128To255Octets	Counter
	txUCPkts256To511Octets	Counter
	txUCPkts512To1023Octets	Counter
	txUCPkts1024To1518Octets	Counter
	txMCPkts64Octets	Counter
	txMCPkts65To127Octets	Counter
	txMCPkts128To255Octets	Counter
	txMCPkts256To511Octets	Counter
	txMCPkts512To1023Octets	Counter
	txMCPkts1024To1518Octets	Counter
	txBCPkts64Octets	Counter
	txBCPkts65To127Octets	Counter
	txBCPkts128To255Octets	Counter
	txBCPkts256To511Octets	Counter
	txBCPkts512To1023Octets	Counter
	txBCPkts1024To1518Octets	Counter
	txOctetsIllegalAddrType	Counter
	tx1ArbitFrameDelay	Counter
	tx2ArbitFrameDelay	Counter
	tx3ArbitFrameDelay	Counter
	tx4ArbitFrameDelay	Counter
	tx5ArbitFrameDelay	Counter
	tx6ArbitFrameDelay	Counter
	tx7ArbitFrameDelay	Counter
	txDeferreds	Counter
	txOctetsHis	Counter
	txOctetsLos	Counter
	txOctetsOutOfRange	Counter
	txExcessiveDeferralsErrors	Counter
	txNiaUnderRunAborts	Counter
	txExcessiveLengthDrops	Counter
	txLinkDownEvents	Counter
	txAllCounterPackets	OCTET STRING
	txAllCounterOthers	OCTET STRING

RxStatEntry
SEQUENCE
	rxStatIndex	INTEGER
	rxUCPkts64OctetsLocals	Counter
	rxUCPkts64OctetsForwardeds	Counter
	rxUCPkts65To127OctetsLocals	Counter
	rxUCPkts65To127OctetsForwardeds	Counter
	rxUCPkts128To255OctetsLocals	Counter
	rxUCPkts128To255OctetsForwardeds	Counter
	rxUCPkts256To511OctetsLocals	Counter
	rxUCPkts256To511OctetsForwardeds	Counter
	rxUCPkts512To1023OctetsLocals	Counter
	rxUCPkts512To1023OctetsForwardeds	Counter
	rxUCPkts1024To1518OctetsLocals	Counter
	rxUCPkts1024To1518OctetsForwardeds	Counter
	rxShortErrors	Counter
	rxRuntErrors	Counter
	rxDataRateMMErrors	Counter
	rxMCPkts64OctetsLocals	Counter
	rxMCPkts64OctetsForwardeds	Counter
	rxMCPkts65To127OctetsLocals	Counter
	rxMCPkts65To127OctetsForwardeds	Counter
	rxMCPkts128To255OctetsLocals	Counter
	rxMCPkts128To255OctetsForwardeds	Counter
	rxMCPkts256To511OctetsLocals	Counter
	rxMCPkts256To511OctetsForwardeds	Counter
	rxMCPkts512To1023OctetsLocals	Counter
	rxMCPkts512To1023OctetsForwardeds	Counter
	rxMCPkts1024To1518OctetsLocals	Counter
	rxMCPkts1024To1518OctetsForwardeds	Counter
	rxOctetsLocalHis	Counter
	rxOctetsLocalLos	Counter
	rxOctetsForwardedHis	Counter
	rxOctetsForwardedLos	Counter
	rxBCPkts64OctetsLocals	Counter
	rxBCPkts64OctetsForwardeds	Counter
	rxBCPkts65To127OctetsLocals	Counter
	rxBCPkts65To127OctetsForwardeds	Counter
	rxBCPkts128To255OctetsLocals	Counter
	rxBCPkts128To255OctetsForwardeds	Counter
	rxBCPkts256To511OctetsLocals	Counter
	rxBCPkts256To511OctetsForwardeds	Counter
	rxBCPkts512To1023OctetsLocals	Counter
	rxBCPkts512To1023OctetsForwardeds	Counter
	rxBCPkts1024To1518OctetsLocals	Counter
	rxBCPkts1024To1518OctetsForwardeds	Counter
	rxFilterMACUnexp2ndPortDrops	Counter
	rxFilterIllegalMACDrops	Counter
	rxFlowCtrlPram	Counter
	rxFlowCtrlNimbus	Counter
	rxPramOverRuns	Counter
	rxNimbusOverRuns	Counter
	rxVeryLongErrors	Counter
	rxLongErrors	Counter
	rxPauseMacControlReceived	Counter
	rxUnknownMacControlFrame	Counter
	rxPiaOutOfPoolDropErrors	Counter
	rxCodeViolations	Counter
	rxJabberErrors	Counter
	rxNiaOverRunDropErrors	Counter
	rxAllCounterPackets	OCTET STRING
	rxAllCounterOthers	OCTET STRING

SmuModuleEntry
SEQUENCE
	smuModuleChassisIndex	INTEGER
	smuModuleIndex	INTEGER
	smuModuleState	INTEGER

SmuPortEntry
SEQUENCE
	smuPortChassisIndex	INTEGER
	smuPortModuleIndex	INTEGER
	smuPortIndex	INTEGER
	smuPortAttachedNumber	INTEGER
	smuPortAttachedMac	OCTET STRING
	smuPortAttachedIp	IpAddress

PermanentEntriesEntry
SEQUENCE
	permanentEntriesMACAddr	OCTET STRING	Size(6)
	permanentEntriesPortId	INTEGER
	permanentEntriesCreateObj	INTEGER
	permanentEntriesDeleteObj	INTEGER

MatrixModuleEntry
SEQUENCE
	matrixModuleIndex	INTEGER
	matrixModuleState	INTEGER
	matrixNumberConnected	INTEGER
	matrixMasterPort	INTEGER

MatrixPortEntry
SEQUENCE
	matrixPortModuleIndex	INTEGER
	matrixPortIndex	INTEGER
	matrixPort	INTEGER
	matrixPortType	INTEGER
	matrixPortMajVer	INTEGER
	matrixPortMinVer	INTEGER
	matrixPortMac	OCTET STRING
	matrixPortIp	IpAddress
	matrixPortSubnetMask	IpAddress
	matrixPortGateway	IpAddress

MediaModuleEntry
SEQUENCE
	moduleMode	INTEGER
	matrixAttachmentPort	INTEGER

Defined Values

s500		1.3.6.1.4.1.343.6.10
OBJECT IDENTIFIER

module		1.3.6.1.4.1.343.6.10.1
OBJECT IDENTIFIER

ports		1.3.6.1.4.1.343.6.10.2
OBJECT IDENTIFIER

statistic		1.3.6.1.4.1.343.6.10.3
OBJECT IDENTIFIER

adaptiveForwardMode		1.3.6.1.4.1.343.6.10.4
OBJECT IDENTIFIER

chipSets		1.3.6.1.4.1.343.6.10.5
OBJECT IDENTIFIER

smu		1.3.6.1.4.1.343.6.10.6
OBJECT IDENTIFIER

permanentEntries		1.3.6.1.4.1.343.6.10.7
OBJECT IDENTIFIER

matrix		1.3.6.1.4.1.343.6.10.8
OBJECT IDENTIFIER

mediamodules		1.3.6.1.4.1.343.6.10.9
OBJECT IDENTIFIER

defaultSwitchMode		1.3.6.1.4.1.343.6.10.1.1
Default switch mode. This is used by the object portSwitchMode when it's value is default(1)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	cutThrough(2), fragmentFree(3), storeAndForward(4), adaptive(5)

defaultFlowControlMode		1.3.6.1.4.1.343.6.10.1.2
Default Flow Control mode. This is used by the object portConfFlowControl when it's value is default(1)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(2), disable(3)

smuMaster		1.3.6.1.4.1.343.6.10.1.3
OBSOLETE
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

localManagementTimeout		1.3.6.1.4.1.343.6.10.1.4
The time (in minutes) that has elapsed before a local management session (telnet or serial) closes when it has not been used. The value '0' means no timeout.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

temperatureLevel		1.3.6.1.4.1.343.6.10.1.5
temperatureLevel values: normal(1) : Temperature normal high(2) : Temperature high. Check air circulation critical(3): Temperature critical. Shut down in 30 seconds
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), high(2), critical(3)

redundantPowerSupplyStatus		1.3.6.1.4.1.343.6.10.1.6
Status for redundant power supply: notPresent(1): RPS not connected or failed. (It may be present but not plugged in or damaged etc.) present(2): RPS not active. (It may be present, connected, in perfect health, but just not being used.) active(3): RPS active
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notPresent(1), present(2), active(3)

portMirroring		1.3.6.1.4.1.343.6.10.1.7
enable(1): Enabling of port mirroring. This is only possible if RMON is disabled. disable(2): Disabling of port mirroring. RMON can only be enabled if port mirroring is disabled
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

disableRmon		1.3.6.1.4.1.343.6.10.1.8
destroyAll(1): Disable RMON and destroy all probes. This is necessary for enabling port mirroring
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	destroyAll(1)

isRmonActive		1.3.6.1.4.1.343.6.10.1.9
enabled(1): RMON is enabled disabled(2): RMON is disabled
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

switchTotalTraffic		1.3.6.1.4.1.343.6.10.1.10
Total switch traffic measured in octets
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bufferPoolUsed		1.3.6.1.4.1.343.6.10.1.11
Total switch buffer pool usage. (percentage between 0 and 100)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

featuresBitFlag		1.3.6.1.4.1.343.6.10.1.12
Bit field index from bit 1 to 32. If an bit is set, the switch supports the related feature. BIT 1: Distributed VLAN BIT 2: Layer 3 switching BIT 3: Diagnostics BIT 4: RSVP BIT 5: IP multicast BIT 6: IP filtering BIT 7: ATM STP BIT 8: Port trunking BIT 9: Port mirroring BIT 10: VLAN stacking BIT 11: Forwarding of learn packets BIT 12: IGMP pruning BIT 13: ToS BIT 14: Bulk En-/Disable STP BIT 15: VLAN table flush BIT 16: Transparent Cache BIT 17: Compressed Stack
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

switchBw		1.3.6.1.4.1.343.6.10.1.13
Max switch BW. (Mbits per second)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ownMatrixAttachmentPort		1.3.6.1.4.1.343.6.10.1.14
Returns the port number of the Matrix port the switch is attached to. NB: will return 50 for a switch not connected to a Matrix Module
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

stackCrc		1.3.6.1.4.1.343.6.10.1.15
checksum for stack specific parameters If a parameter is unavailable 0 is returned
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portSnmpPort		1.3.6.1.4.1.343.6.10.2.1
Returns the port which this SNMP request went through. This gives the port on which the SNMP management system is connected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portLastChange		1.3.6.1.4.1.343.6.10.2.2
The value of sysUpTime after any interface has changed state
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

portInfoTable		1.3.6.1.4.1.343.6.10.2.3
Port information table which includes all ports.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortInfoEntry

portInfoEntry		1.3.6.1.4.1.343.6.10.2.3.1
Contains the type of interface .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PortInfoEntry

portInfoChassisIndex		1.3.6.1.4.1.343.6.10.2.3.1.1
Chassis index
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portInfoModuleIndex		1.3.6.1.4.1.343.6.10.2.3.1.2
Module index
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portInfoIndex		1.3.6.1.4.1.343.6.10.2.3.1.3
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portInfoType		1.3.6.1.4.1.343.6.10.2.3.1.4
The type of Physical interface at the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hundredbasetx(1), hundredbasefx(2), core(3), internal(4), layer3link(5), gigabasesx(10), gigabaselx(11)

portConfTable		1.3.6.1.4.1.343.6.10.2.4
Port configuration and status table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortConfEntry

portConfEntry		1.3.6.1.4.1.343.6.10.2.4.1
An entry containing the objects for configuration and status of a port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PortConfEntry

portConfChassisIndex		1.3.6.1.4.1.343.6.10.2.4.1.1
Chassis index
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portConfModuleIndex		1.3.6.1.4.1.343.6.10.2.4.1.2
Module index
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portConfIndex		1.3.6.1.4.1.343.6.10.2.4.1.3
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portConfDescr		1.3.6.1.4.1.343.6.10.2.4.1.4
User configurable description of the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..31)

portConfLocation		1.3.6.1.4.1.343.6.10.2.4.1.5
User configurable location of the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

portConfConfigSwitchMode		1.3.6.1.4.1.343.6.10.2.4.1.6
Port Switch mode. If set to default(1) the value from defaultSwitchMode is used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	default(1), cutThrough(2), fragmentFree(3), storeAndForward(4), adaptive(5), notAvailable(99)

portConfFlowControl		1.3.6.1.4.1.343.6.10.2.4.1.7
Port Flow Control mode. If set to default(1) the value from defaultFlowControlMode is used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	default(1), enable(2), disable(3), notAvailable(99)

portConfSpeedSupported		1.3.6.1.4.1.343.6.10.2.4.1.8
The possible speeds of a port
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	speed10Mbit(1), speed100Mbit(2), speed10And100Mbit(3), speed10And100AndAutoMbit(4), speed155Mbit(5), speed1Gbit(6), speed1AndAutoGbit(7), notAvailable(99)

portConfDuplexSupported		1.3.6.1.4.1.343.6.10.2.4.1.9
The possible duplex modes of a port
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	half(1), full(2), halfAndFull(3), auto(4), autoAndFull(6), autoAndHalfAndFull(7), notAvailable(99)

portConfConfigSpeed		1.3.6.1.4.1.343.6.10.2.4.1.10
The configured speed for a port
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	speed10Mbit(1), speed100Mbit(2), speed1Gbit(3)

portConfConfigDuplex		1.3.6.1.4.1.343.6.10.2.4.1.11
The configured duplex mode for a port
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	half(1), full(2)

portConfConfigAutoNeg		1.3.6.1.4.1.343.6.10.2.4.1.12
The configured auto-negotiation for a port
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

portConfSpeed		1.3.6.1.4.1.343.6.10.2.4.1.13
The current speed for a port
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	speed10Mbit(1), speedAutoDetect10Mbit(2), speed100Mbit(3), speedAutoDetect100Mbit(4), speed1Gbit(5), speedAutoDetect1Gbit(6), speed155Mbit(7), notAvailable(99)

portConfDuplex		1.3.6.1.4.1.343.6.10.2.4.1.14
The current duplex mode for a port
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	half(1), autoDetectHalf(2), full(3), autoDetectFull(4), notAvailable(99)

portConfAutoNeg		1.3.6.1.4.1.343.6.10.2.4.1.15
The currect auto-negotiation for a port
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	manual(1), auto(2), failed(3), notAvailable(99)

portConfSwitchMode		1.3.6.1.4.1.343.6.10.2.4.1.16
Current forwarding mode of the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cutThrough(1), adaptiveCutThrough(2), fragmentFree(3), adaptiveFragmentFree(4), storeAndForward(5), adaptiveStoreAndForward(6), notAvailable(99)

portConfTrunkSupported		1.3.6.1.4.1.343.6.10.2.4.1.17
The types of port trunking available for the actual port. A trunk consists of a number ports sitting next to each other. The first port is selected as master for the trunk, the following as slaves. trunkWidthTwo(1): Port is available as master for 2 port trunking. trunkWidthFour(2): Port is available as master for 4 port trunking. trunkMaster(3): Port is master in a trunk. trunkSlave(4): Port is slave in a trunk. notAvailable(99): Port is not available for trunking.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	trunkWidthTwo(1), trunkWidthFour(2), trunkMaster(3), trunkSlave(4), notAvailable(99)

portConfTrunkConfig		1.3.6.1.4.1.343.6.10.2.4.1.18
The size of the actual trunk. 0 means trunkWidthTwo(1): This port is member of a 2 port trunk. trunkWidthFour(2):This port is member of a 4 port trunk. disable(99): This port is not trunked
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	trunkWidthTwo(1), trunkWidthFour(2), disable(99)

portConfTrunkName		1.3.6.1.4.1.343.6.10.2.4.1.19
Trunk name
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..15)

portConfMirrorSupported		1.3.6.1.4.1.343.6.10.2.4.1.20
Which mode of port mirroring does the port support. mirrorSourceOnly(1): Port can only be used as source for mirroring mirrorDestinationOnly(2): Port can only be used as destination for mirroring mirrorSourceOrDestination(3): Port can be used as source or destination notAvailable(99): Port can not be used for mirroring
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	mirrorSourceOnly(1), mirrorDestinationOnly(2), mirrorSourceOrDestination(3), notAvailable(99)

portConfMirrorConfig		1.3.6.1.4.1.343.6.10.2.4.1.21
The configured port mirroring for the actual port. mirrorSource(1): Port is source for mirroring mirrorDestination(2): Port is destination for mirroring disabled(99): Port is not mirrored
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	mirrorSource(1), mirrorDestination(2), disabled(99)

portConfVlanSupported		1.3.6.1.4.1.343.6.10.2.4.1.22
Describes if the port can be used as a port rule in the VLAN configuration. enabled(1): Port can be used in port VLANs notAvailable(99): Port can not be used in port VLANs
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), notAvailable(99)

portAllSpanningTreeMode		1.3.6.1.4.1.343.6.10.2.5
Enable or Disable Spanning Tree Protocol for all ports on switch. SET is only allowed with value allEnabled(1) or allDisabled(2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	allEnabled(1), allDisabled(2), mixed(3)

txStatTable		1.3.6.1.4.1.343.6.10.3.1
Transmit statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TxStatEntry

txStatEntry		1.3.6.1.4.1.343.6.10.3.1.1
An entry containing objects for transmit statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TxStatEntry

txStatIndex		1.3.6.1.4.1.343.6.10.3.1.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

txUCPkts64Octets		1.3.6.1.4.1.343.6.10.3.1.1.2
64 byte unicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txUCPkts65To127Octets		1.3.6.1.4.1.343.6.10.3.1.1.3
65 to 127 byte unicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txUCPkts128To255Octets		1.3.6.1.4.1.343.6.10.3.1.1.4
128 to 255 byte unicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txUCPkts256To511Octets		1.3.6.1.4.1.343.6.10.3.1.1.5
256 to 511 byte unicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txUCPkts512To1023Octets		1.3.6.1.4.1.343.6.10.3.1.1.6
512 to 1023 byte unicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txUCPkts1024To1518Octets		1.3.6.1.4.1.343.6.10.3.1.1.7
1024 to 1518 byte unicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txMCPkts64Octets		1.3.6.1.4.1.343.6.10.3.1.1.8
64 byte multicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txMCPkts65To127Octets		1.3.6.1.4.1.343.6.10.3.1.1.9
65 to 127 byte multicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txMCPkts128To255Octets		1.3.6.1.4.1.343.6.10.3.1.1.10
128 to 255 byte multicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txMCPkts256To511Octets		1.3.6.1.4.1.343.6.10.3.1.1.11
256 to 511 byte multicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txMCPkts512To1023Octets		1.3.6.1.4.1.343.6.10.3.1.1.12
512 to 1023 byte multicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txMCPkts1024To1518Octets		1.3.6.1.4.1.343.6.10.3.1.1.13
1024 to 1518 byte multicast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txBCPkts64Octets		1.3.6.1.4.1.343.6.10.3.1.1.14
64 byte broadcast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txBCPkts65To127Octets		1.3.6.1.4.1.343.6.10.3.1.1.15
65 to 127 byte broadcast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txBCPkts128To255Octets		1.3.6.1.4.1.343.6.10.3.1.1.16
128 to 255 byte broadcast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txBCPkts256To511Octets		1.3.6.1.4.1.343.6.10.3.1.1.17
256 to 511 byte broadcast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txBCPkts512To1023Octets		1.3.6.1.4.1.343.6.10.3.1.1.18
512 to 1023 byte broadcast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txBCPkts1024To1518Octets		1.3.6.1.4.1.343.6.10.3.1.1.19
1024 to 1518 byte broadcast packets transmitted
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txOctetsIllegalAddrType		1.3.6.1.4.1.343.6.10.3.1.1.20
Internal error -- not possible. Always zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tx1ArbitFrameDelay		1.3.6.1.4.1.343.6.10.3.1.1.21
Tx packets delayed less than 1 slot time (due to NIMBUS overload).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tx2ArbitFrameDelay		1.3.6.1.4.1.343.6.10.3.1.1.22
Tx packets delayed between 1 and 2 slot times (due to NIMBUS overload)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tx3ArbitFrameDelay		1.3.6.1.4.1.343.6.10.3.1.1.23
Tx packets delayed between 2 and 4 slot times (due to NIMBUS overload)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tx4ArbitFrameDelay		1.3.6.1.4.1.343.6.10.3.1.1.24
Tx packets delayed between 4 and 8 slot times (due to NIMBUS overload)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tx5ArbitFrameDelay		1.3.6.1.4.1.343.6.10.3.1.1.25
Tx packets delayed between 8 and 16 slot times (due to NIMBUS overload)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tx6ArbitFrameDelay		1.3.6.1.4.1.343.6.10.3.1.1.26
Tx packets delayed between 16 and 32 slot times (due to NIMBUS overload)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

tx7ArbitFrameDelay		1.3.6.1.4.1.343.6.10.3.1.1.27
Tx packets delayed more than 32 slot times (due to NIMBUS overload)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txDeferreds		1.3.6.1.4.1.343.6.10.3.1.1.28
Half duplex: Tx packet delayed, due to receiving a packet. Full duplex: Tx packet delayed, due to receiving of a MAC pause control frame.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txOctetsHis		1.3.6.1.4.1.343.6.10.3.1.1.29
Upper part of a 64 bit octet transmitted counter
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txOctetsLos		1.3.6.1.4.1.343.6.10.3.1.1.30
Lower part of a 64 bit octet transmitted counter
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txOctetsOutOfRange		1.3.6.1.4.1.343.6.10.3.1.1.31
Internal error
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txExcessiveDeferralsErrors		1.3.6.1.4.1.343.6.10.3.1.1.32
Maximum deferral should be the duration of a maximum length packet, if no errors on the net. Excessive deferral is indicated if deferral duration is more than approximately 49 maximum packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txNiaUnderRunAborts		1.3.6.1.4.1.343.6.10.3.1.1.34
Internal discard
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txExcessiveLengthDrops		1.3.6.1.4.1.343.6.10.3.1.1.35
Tx packets discarded due to too long packets (Only possible if receiving too long packets are allowed)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txLinkDownEvents		1.3.6.1.4.1.343.6.10.3.1.1.36
No link pulses are received. Usually this means that the cable is removed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

txAllCounterPackets		1.3.6.1.4.1.343.6.10.3.1.1.37
A collection of all counters for byte and packet counters. This object is needed to optimize SNMP traffic. The counters in this string are: txStatIndex INTEGER txOctetsHis Counter txOctetsLos Counter txUCPkts64Octets Counter txUCPkts65To127Octets Counter txUCPkts128To255Octets Counter txUCPkts256To511Octets Counter txUCPkts512To1023Octets Counter txUCPkts1024To1518Octets Counter txMCPkts64Octets Counter txMCPkts65To127Octets Counter txMCPkts128To255Octets Counter txMCPkts256To511Octets Counter txMCPkts512To1023Octets Counter txMCPkts1024To1518Octets Counter txBCPkts64Octets Counter txBCPkts65To127Octets Counter txBCPkts128To255Octets Counter txBCPkts256To511Octets Counter txBCPkts512To1023Octets Counter txBCPkts1024To1518Octets Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(127)

txAllCounterOthers		1.3.6.1.4.1.343.6.10.3.1.1.38
A collection of all counters -- other than for byte and packet counters. This object is needed to optimize SNMP traffic. The counters in this string are: txStatIndex INTEGER txDeferreds Counter txExcessiveDeferralsErrors Counter txForwRxErrorCollision Counter txNiaUnderRunAborts Counter txLinkDownEvents Counter -- Counters from RFC1643 txCSenseErrors Counter txSQEErrors Counter txLateCollisions Counter txExcessiveCollisionErrors Counter txSingleCollisionFrames Counter txMultipleCollisionFrames Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(127)

rxStatTable		1.3.6.1.4.1.343.6.10.3.2
Receive statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RxStatEntry

rxStatEntry		1.3.6.1.4.1.343.6.10.3.2.1
An entry containing objects for receive statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RxStatEntry

rxStatIndex		1.3.6.1.4.1.343.6.10.3.2.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rxUCPkts64OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.2
64 byte unicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts64OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.3
64 byte unicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts65To127OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.4
65 to 127 byte unicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts65To127OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.5
65 to 127 byte unicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts128To255OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.6
128 to 255 byte unicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts128To255OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.7
128 to 255 byte unicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts256To511OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.8
256 to 511 byte unicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts256To511OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.9
255 to 511 byte unicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts512To1023OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.10
512 to 1023 byte unicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts512To1023OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.11
512 to 1023 byte unicast packets received which has been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts1024To1518OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.12
1024 to 1518 byte unicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUCPkts1024To1518OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.13
1024 to 1518 byte unicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxShortErrors		1.3.6.1.4.1.343.6.10.3.2.1.14
Receive fragments shorter than the minimum ordinary collision fragment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxRuntErrors		1.3.6.1.4.1.343.6.10.3.2.1.15
Ordinary collision fragments received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxDataRateMMErrors		1.3.6.1.4.1.343.6.10.3.2.1.16
A data rate miss-match error occurs if the data rate deviation is larger than allowed. This should only occur if problems with the TX oscillator in the adapter transmitting the frame.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts64OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.17
64 byte multicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts64OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.18
64 byte multicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts65To127OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.19
65 to 127 byte multicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts65To127OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.20
65 to 127 byte multicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts128To255OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.21
128 to 255 byte multicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts128To255OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.22
128 to 255 byte multicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts256To511OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.23
256 to 511 byte multicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts256To511OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.24
256 to 511 byte multicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts512To1023OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.25
512 to 1023 byte multicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts512To1023OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.26
512 to 1023 byte multicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts1024To1518OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.27
1024 to 1518 byte multicast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxMCPkts1024To1518OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.28
1024 to 1518 byte multicast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxOctetsLocalHis		1.3.6.1.4.1.343.6.10.3.2.1.29
Upper part of a 64 bit octet received counter which has not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxOctetsLocalLos		1.3.6.1.4.1.343.6.10.3.2.1.30
Lower part of a 64 bit octet received counter which has not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxOctetsForwardedHis		1.3.6.1.4.1.343.6.10.3.2.1.31
Upper part of a 64 bit octet received counter which has been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxOctetsForwardedLos		1.3.6.1.4.1.343.6.10.3.2.1.32
Lower part of a 64 bit octet received counter which has been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts64OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.33
64 byte broadcast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts64OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.34
64 byte broadcast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts65To127OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.35
65 to 127 byte broadcast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts65To127OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.36
65 to 127 byte broadcast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts128To255OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.37
128 to 255 byte broadcast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts128To255OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.38
128 to 255 byte broadcast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts256To511OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.39
256 to 511 byte broadcast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts256To511OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.40
256 to 511 byte broadcast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts512To1023OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.41
512 to 1023 byte broadcast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts512To1023OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.42
512 to 1023 byte broadcast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts1024To1518OctetsLocals		1.3.6.1.4.1.343.6.10.3.2.1.43
1024 to 1518 byte broadcast packets received which have not been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxBCPkts1024To1518OctetsForwardeds		1.3.6.1.4.1.343.6.10.3.2.1.44
1024 to 1518 byte broadcast packets received which have been forwarded
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxFilterMACUnexp2ndPortDrops		1.3.6.1.4.1.343.6.10.3.2.1.45
MAC address has been moved from one port to another
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxFilterIllegalMACDrops		1.3.6.1.4.1.343.6.10.3.2.1.46
Packet is dropped because the source MAC address is illegal (zero or broadcase)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxFlowCtrlPram		1.3.6.1.4.1.343.6.10.3.2.1.47
Half duplex: Number of Flow Control collisions generated due to PRAM limitations. Full duplex: Number of MAC pause control frames transmitted due to PRAM limitations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxFlowCtrlNimbus		1.3.6.1.4.1.343.6.10.3.2.1.48
Half duplex: Number of Flow Control collisions generated due to NIMBUS overload. Full duplex: Number of MAC pause control frames transmitted due to NIMBUS overload.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxPramOverRuns		1.3.6.1.4.1.343.6.10.3.2.1.49
Rx packets discarded due to PRAM limitation
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxNimbusOverRuns		1.3.6.1.4.1.343.6.10.3.2.1.50
Rx packets discarded due to NIMBUS limitation
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxVeryLongErrors		1.3.6.1.4.1.343.6.10.3.2.1.51
Rx packets that are much too long (> 6000 bytes).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxLongErrors		1.3.6.1.4.1.343.6.10.3.2.1.52
Rx packets that are too long (> 1518 bytes)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxPauseMacControlReceived		1.3.6.1.4.1.343.6.10.3.2.1.53
Number of MAC pause control frames received
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxUnknownMacControlFrame		1.3.6.1.4.1.343.6.10.3.2.1.54
Number of unsupported MAC control frames received
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxPiaOutOfPoolDropErrors		1.3.6.1.4.1.343.6.10.3.2.1.55
Reception is aborted due to lack of pool memory -- the switch is overloaded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxCodeViolations		1.3.6.1.4.1.343.6.10.3.2.1.56
An illegal symbol received on a 100Base-X port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxJabberErrors		1.3.6.1.4.1.343.6.10.3.2.1.57
Rx packets that are too long and contains CRC errors and/or dribble nibble.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxNiaOverRunDropErrors		1.3.6.1.4.1.343.6.10.3.2.1.58
The NIA Rx buffer goes to overrun if the nimbus is overloaded (NIA10 only).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

rxAllCounterPackets		1.3.6.1.4.1.343.6.10.3.2.1.59
A collection of all counters for byte and packet counters. This object is needed to optimise SNMP traffic. The counters in this string are: rxStatIndex INTEGER rxOctetsLocalHis Counter rxOctetsLocalLos Counter rxOctetsForwardedHis Counter rxOctetsForwardedLos Counter rxUCPkts64OctetsLocals Counter rxUCPkts64OctetsForwardeds Counter rxUCPkts65To127OctetsLocals Counter rxUCPkts65To127OctetsForwardeds Counter rxUCPkts128To255OctetsLocals Counter rxUCPkts128To255OctetsForwardeds Counter rxUCPkts256To511OctetsLocals Counter rxUCPkts256To511OctetsForwardeds Counter rxUCPkts512To1023OctetsLocals Counter rxUCPkts512To1023OctetsForwardeds Counter rxUCPkts1024To1518OctetsLocals Counter rxUCPkts1024To1518OctetsForwardeds Counter rxMCPkts64OctetsLocals Counter rxMCPkts64OctetsForwardeds Counter rxMCPkts65To127OctetsLocals Counter rxMCPkts65To127OctetsForwardeds Counter rxMCPkts128To255OctetsLocals Counter rxMCPkts128To255OctetsForwardeds Counter rxMCPkts256To511OctetsLocals Counter rxMCPkts256To511OctetsForwardeds Counter rxMCPkts512To1023OctetsLocals Counter rxMCPkts512To1023OctetsForwardeds Counter rxMCPkts1024To1518OctetsLocals Counter rxMCPkts1024To1518OctetsForwardeds Counter rxBCPkts64OctetsLocals Counter rxBCPkts64OctetsForwardeds Counter rxBCPkts65To127OctetsLocals Counter rxBCPkts65To127OctetsForwardeds Counter rxBCPkts128To255OctetsLocals Counter rxBCPkts128To255OctetsForwardeds Counter rxBCPkts256To511OctetsLocals Counter rxBCPkts256To511OctetsForwardeds Counter rxBCPkts512To1023OctetsLocals Counter rxBCPkts512To1023OctetsForwardeds Counter rxBCPkts1024To1518OctetsLocals Counter rxBCPkts1024To1518OctetsForwardeds Counter The values are represented in the OCTET STRING in the listed order. Each value stored as a 32 bits big engine value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(164)

rxAllCounterOthers		1.3.6.1.4.1.343.6.10.3.2.1.60
A collection of all counters other than for byte and packet counters. This object is needed to optimize SNMP traffic. The counters in this string are: rxStatIndex INTEGER rxShortErrors Counter rxRuntErrors Counter rxDataRateMMErrors Counter rxFilterMACUnexp2ndPortDrops Counter rxFilterIllegalMACDrops Counter rxVeryLongErrors Counter rxLongErrors Counter rxCodeViolation Counter rxJabberErrors Counter -- Counters from RFC1643 rxAlignErrors Counter rxFCSErrors Counter The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(48)

totalRxTxPackets		1.3.6.1.4.1.343.6.10.3.3
This object is used for LED control to display traffic. Values in the string are all packets transmitted and received at each port. The number and order of values equals the ifIndex, however only physical ports are included in the array. Each entry is 4 bytes. The first 4 bytes of the string is the value of portLastChange.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

totalCollisions		1.3.6.1.4.1.343.6.10.3.4
This object is used for LED control to display collision. Values in the string are the total collisions at each port. The number and order of values equals the ifIndex, however only physical ports are included in the array. Each entry is 4 bytes. The first 4 bytes of the string is the value of portLastChange.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

adaptiveForwardModeSampleTime		1.3.6.1.4.1.343.6.10.4.1
Specify how long (in seconds) the received packets will be monitored. The resulting forwarding mode will be based on the quality of the packets
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

adaptiveForwardModeRuntsOffset		1.3.6.1.4.1.343.6.10.4.2
Specifies the minimum amount of runts during the sample time which forces the port out of cutThrough(2). The value is specified in per mill * 1000
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

adaptiveForwardModeRuntsRange		1.3.6.1.4.1.343.6.10.4.3
Specifies (together with adaptiveForwardModeRuntsOffset) the maximum amount of runts allowed during the sample time. This forces the port back to cutThrough(2). The value is specified in per mill * 1000
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

adaptiveForwardModeCrcsOffset		1.3.6.1.4.1.343.6.10.4.4
Specifies the maximum amount of CRC errors during the sample time. This forces the port out of Store-and-Forward. The value is specified in per mill * 1000
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

adaptiveForwardModeCrcsRange		1.3.6.1.4.1.343.6.10.4.5
Specifies together with adaptiveForwardModeCrcsOffset the maximum amount of CRC errors during the sample time. This forces the port out of Store-and-Forward. The value is specified in per mill * 1000
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smuModuleTable		1.3.6.1.4.1.343.6.10.6.1
Not implemented yet
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmuModuleEntry

smuModuleEntry		1.3.6.1.4.1.343.6.10.6.1.1
Not implemented yet
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmuModuleEntry

smuModuleChassisIndex		1.3.6.1.4.1.343.6.10.6.1.1.1
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smuModuleIndex		1.3.6.1.4.1.343.6.10.6.1.1.2
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smuModuleState		1.3.6.1.4.1.343.6.10.6.1.1.3
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smuPortTable		1.3.6.1.4.1.343.6.10.6.2
Not implemented yet
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmuPortEntry

smuPortEntry		1.3.6.1.4.1.343.6.10.6.2.1
Not implemented yet
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmuPortEntry

smuPortChassisIndex		1.3.6.1.4.1.343.6.10.6.2.1.1
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smuPortModuleIndex		1.3.6.1.4.1.343.6.10.6.2.1.2
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smuPortIndex		1.3.6.1.4.1.343.6.10.6.2.1.3
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smuPortAttachedNumber		1.3.6.1.4.1.343.6.10.6.2.1.4
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smuPortAttachedMac		1.3.6.1.4.1.343.6.10.6.2.1.5
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

smuPortAttachedIp		1.3.6.1.4.1.343.6.10.6.2.1.6
Not implemented yet
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

permanentEntriesTable		1.3.6.1.4.1.343.6.10.7.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PermanentEntriesEntry

permanentEntriesEntry		1.3.6.1.4.1.343.6.10.7.1.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PermanentEntriesEntry

permanentEntriesMACAddr		1.3.6.1.4.1.343.6.10.7.1.1.1
MAC address of permanent entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(6)

permanentEntriesPortId		1.3.6.1.4.1.343.6.10.7.1.1.2
Port number for permanent entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

permanentEntriesCreateObj		1.3.6.1.4.1.343.6.10.7.1.1.3
Create a non-existant table entry. If the entry already exists, genError is returned. Format: PortId (INTEGER)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

permanentEntriesDeleteObj		1.3.6.1.4.1.343.6.10.7.1.1.4
Delete an existing table entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1)

matrixModuleTable		1.3.6.1.4.1.343.6.10.8.1
The table for general stack information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MatrixModuleEntry

matrixModuleEntry		1.3.6.1.4.1.343.6.10.8.1.1
Information for a specific module slot about stackconnections, state, masterinformation
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MatrixModuleEntry

matrixModuleIndex		1.3.6.1.4.1.343.6.10.8.1.1.1
Slot number to retrieve information for. 1 is slot A, 2 is slot B
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

matrixModuleState		1.3.6.1.4.1.343.6.10.8.1.1.2
State of the matrix module. If notAvailable(99) no matrix module can be seen, active(1) is indicating a running module, standby(2) is indicating a module that is ready to become active if needed in a redundant setup, error(3) indicates a stack/redundancy error, back(4) is id the SIM module is running in a back to back configuration
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), standby(2), error(3), back(4), notAvailable(99)

matrixNumberConnected		1.3.6.1.4.1.343.6.10.8.1.1.3
The number of connected units to the matrix module
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

matrixMasterPort		1.3.6.1.4.1.343.6.10.8.1.1.4
0 means no master available, otherwise an ifindex is returned (50->57)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

matrixPortTable		1.3.6.1.4.1.343.6.10.8.2
Matrix module per port overview.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MatrixPortEntry

matrixPortEntry		1.3.6.1.4.1.343.6.10.8.2.1
Per switch of information gathered from the matrix module about the connected devices
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MatrixPortEntry

matrixPortModuleIndex		1.3.6.1.4.1.343.6.10.8.2.1.1
Slot number to retrieve information for. 1 is slot A, 2 is slot B
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

matrixPortIndex		1.3.6.1.4.1.343.6.10.8.2.1.2
Index for retrieving the matrix ports
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

matrixPort		1.3.6.1.4.1.343.6.10.8.2.1.3
0 means no device is available, otherwise an ifindex is returned (50->57)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

matrixPortType		1.3.6.1.4.1.343.6.10.8.2.1.4
The connected device type, notAvailable(99) if unknown or none
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	es510(1), es520(2), es550T(3), es550F(4), gb2(5), atm(6), notAvailable(99)

matrixPortMajVer		1.3.6.1.4.1.343.6.10.8.2.1.5
Major Version of matrix module shared memory layout supported
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

matrixPortMinVer		1.3.6.1.4.1.343.6.10.8.2.1.6
Minor Version of matrix module shared memory layout supported
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

matrixPortMac		1.3.6.1.4.1.343.6.10.8.2.1.7
Mac address of the device connected to a specific matrix port. If the device does not have a mac address it will be zero
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

matrixPortIp		1.3.6.1.4.1.343.6.10.8.2.1.8
IP address of the device connected to a specific matrix port. If the device does not have an IP address it will be zero
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

matrixPortSubnetMask		1.3.6.1.4.1.343.6.10.8.2.1.9
IP subnet mask of the device connected to a specific matrix port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

matrixPortGateway		1.3.6.1.4.1.343.6.10.8.2.1.10
IP gateway of the device connected to a specific matrix port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

matrixLastChange		1.3.6.1.4.1.343.6.10.8.3
Timestamp for last change in matrix tables on any Matrix module
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

mediaModuleTable		1.3.6.1.4.1.343.6.10.9.1
Possible values of indices are 1..moduleMaxMediaModules
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MediaModuleEntry

mediaModuleEntry		1.3.6.1.4.1.343.6.10.9.1.1
Possible values of indices are 1..stackMaxChassis, 1..chassisMaxModules and 1..moduleMaxMediaModules
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MediaModuleEntry

moduleMode		1.3.6.1.4.1.343.6.10.9.1.1.1
Hardware mode for media module. Stack mode is 1 (connected to stack), Stand alone mode is 2 (connected to switch).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	stackMode(1), standAloneMode(2)

matrixAttachmentPort		1.3.6.1.4.1.343.6.10.9.1.1.2
Returns the port number of the Matrix port the uplink mmodule is attached to. NB: will return 50 for a uplink module not connected to a Matrix Module
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mediaModuleChange		1.3.6.1.4.1.343.6.10.9.2
The value of sysUpTime after any mediamoduletype has changed
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

s500PermVioEvent		1
This trap is sent when there has been a permanent entry violation. A MAC address has been detected at a port, other than the port where it has been configured as a permanent entry. The variable portIfIndex indicates the port where the MAC incorrectly has been detected. The problem can be solved by re-configuring the MAC's permanent entry, or by physically moving the MAC to the port it has been configured for.
TRAP-TYPE

s500AdaptiveForwEvent		2
This trap is sent when a port automatically is changing forwarding mode. This will only happen when the port has been configured to Adaptive mode. The syntax is (Portnumber, New mode, Old mode)
TRAP-TYPE

s500TemperatureEvent		3
This trap indicates that the temparature of the chassis has changed
TRAP-TYPE

s500RedundantPowerSupplyEvent		4
This trap indicates that the status of the redundant power supply has changed
TRAP-TYPE