INTEL-RMODEXT-MIB

File: INTEL-RMODEXT-MIB.mib (4782 bytes)

Imported modules

INTEL-GEN-MIB RFC-1212

Imported symbols

modulesext OBJECT-TYPE

Defined Types

RmodextGModuleEntry  
SEQUENCE    
  rmodextGModuleChassisIndex INTEGER
  rmodextGModuleIndex INTEGER
  rmodextGModuleHwEncryption INTEGER
  rmodextGModuleSwEncryption INTEGER
  rmodextGModuleSwState INTEGER
  rmodextGModuleRamFree INTEGER
  rmodextGModuleSwVersion OCTET STRING
  rmodextGModulePbaNo OCTET STRING
  rmodextGModuleBootSectionVersion OCTET STRING
  rmodextGModuleMulti1 OCTET STRING
  rmodextGModuleMulti2 OCTET STRING

Defined Values

rmodext 1.3.6.1.4.1.343.7.13.1
OBJECT IDENTIFIER    

rmodextGeneral 1.3.6.1.4.1.343.7.13.1.1
OBJECT IDENTIFIER    

rmodextGModuleTable 1.3.6.1.4.1.343.7.13.1.1.1
General extensions that applies to all hardware revisions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RmodextGModuleEntry

rmodextGModuleEntry 1.3.6.1.4.1.343.7.13.1.1.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RmodextGModuleEntry  

rmodextGModuleChassisIndex 1.3.6.1.4.1.343.7.13.1.1.1.1.1
Chassis number in stack that contains the module. Same as moduleChassisIndex in INTEL-GEN-MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rmodextGModuleIndex 1.3.6.1.4.1.343.7.13.1.1.1.1.2
Module number in the chassis. Same as moduleIndex in INTEL-GEN-MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rmodextGModuleHwEncryption 1.3.6.1.4.1.343.7.13.1.1.1.1.3
Encryption support disabled: Hardware does not support encryption enabled: Hardware does not support encryption
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

rmodextGModuleSwEncryption 1.3.6.1.4.1.343.7.13.1.1.1.1.4
Encryption support disabled: Software does not support encryption enabled: Software does not support encryption
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

rmodextGModuleSwState 1.3.6.1.4.1.343.7.13.1.1.1.1.5
Router status after cold reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER testing(1), noError(2), error(3)  

rmodextGModuleRamFree 1.3.6.1.4.1.343.7.13.1.1.1.1.6
Number of kilobytes free in RAM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rmodextGModuleSwVersion 1.3.6.1.4.1.343.7.13.1.1.1.1.7
Router software version number
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

rmodextGModulePbaNo 1.3.6.1.4.1.343.7.13.1.1.1.1.8
PBA number
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

rmodextGModuleBootSectionVersion 1.3.6.1.4.1.343.7.13.1.1.1.1.9
Boot PROM version number
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

rmodextGModuleMulti1 1.3.6.1.4.1.343.7.13.1.1.1.1.10
Multiple information object 1: - MaxMpLinks (2 bytes) - CompressionType (1 byte): sw(2), hw(3) - Max Compression Rate in kbps (4 bytes) (all values are returned in big-endian format)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(250)  

rmodextGModuleMulti2 1.3.6.1.4.1.343.7.13.1.1.1.1.11
Multiple information object 2: Currently empty
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(250)