INTEL-ES400-MIB

File: INTEL-ES400-MIB.mib (97801 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises TimeTicks Counter
IpAddress DisplayString PhysAddress
OBJECT-TYPE TRAP-TYPE

Defined Types

MacAddress  
OCTET STRING Size(6)    

PortList  
OCTET STRING Size(4)    

VlanIndex  
INTEGER    

Es400AgentMibSupportEntry  
SEQUENCE    
  es400AgentMibSupportIndex INTEGER
  es400AgentMibSupportDescr DisplayString
  es400AgentMibSupportVersion INTEGER
  es400AgentMibSupportType INTEGER

Es400AgentIpIfEntry  
SEQUENCE    
  es400AgentIpIfIndex INTEGER
  es400AgentIpIfAddress IpAddress
  es400AgentIpIfNetMask IpAddress
  es400AgentIpIfDefaultRouter IpAddress
  es400AgentIpIfMacAddr PhysAddress
  es400AgentIpIfType INTEGER

Es400AgentTrapAddressEntry  
SEQUENCE    
  es400AgentTrapIndex INTEGER
  es400AgentTrapAddressIp IpAddress
  es400AgentTrapAddressComm DisplayString
  es400AgentTrapAddressStatus INTEGER

Es400PortInfoEntry  
SEQUENCE    
  es400PortInfoIndex INTEGER
  es400PortInfoType INTEGER
  es400PortInfoLinkStatus INTEGER
  es400PortInfoNwayStatus INTEGER
  es400PortInfoFlowCtrlStatus INTEGER

Es400PortConfigEntry  
SEQUENCE    
  es400PortConfigIndex INTEGER
  es400PortConfigAdminState INTEGER
  es400PortConfigLinkStatusAlarmState INTEGER
  es400PortConfigNwayState INTEGER
  es400PortConfigFlowCtrlState INTEGER
  es400PortConfigBackPressState INTEGER
  es400PortConfigLockState INTEGER
  es400PortConfigPriority INTEGER
  es400PortConfigStpState INTEGER
  es400PortConfigHOLState INTEGER
  es400PortConfigBroadcastStormThr INTEGER
  es400PortConfigBroadcastStormCtrl INTEGER
  es400PortConfigCleanAllStatisticCounter INTEGER

Es400PortStatEntry  
SEQUENCE    
  es400PortStatIndex INTEGER
  es400PortStatByteRx Counter
  es400PortStatByteTx Counter
  es400PortStatFrameRx Counter
  es400PortStatFrameTx Counter
  es400PortStatTotalBytesRx Counter
  es400PortStatTotalFramesRx Counter
  es400PortStatBroadcastFramesRx Counter
  es400PortStatMulticastFramesRx Counter
  es400PortStatCRCError Counter
  es400PortStatOversizeFrames Counter
  es400PortStatFragments Counter
  es400PortStatJabber Counter
  es400PortStatCollision Counter
  es400PortStatLateCollision Counter
  es400PortStatFrames-64-bytes Counter
  es400PortStatFrames-65-127-bytes Counter
  es400PortStatFrames-128-255-bytes Counter
  es400PortStatFrames-256-511-bytes Counter
  es400PortStatFrames-512-1023-bytes Counter
  es400PortStatFrames-1024-1536-bytes Counter
  es400PortStatFramesDroppedFrames Counter
  es400PortStatMulticastFramesTx Counter
  es400PortStatBroadcastFramesTx Counter
  es400PortStatUndersizeFrames Counter

Es400FDbStaticEntry  
SEQUENCE    
  es400FdbStaticVid INTEGER
  es400FDbStaticAddressIndex MacAddress
  es400FDbStaticPortMap OCTET STRING
  es400FDbStaticState INTEGER
  es400FDbStaticStatus INTEGER

Es400FDbFilterEntry  
SEQUENCE    
  es400FdbFilterVid INTEGER
  es400FDbFilterAddressIndex MacAddress
  es400FDbFilterState INTEGER

Es400LinkAggrEntry  
SEQUENCE    
  es400LinkAggrIndex INTEGER
  es400LinkAggrName DisplayString
  es400LinkAggrMasterPort INTEGER
  es400LinkAggrMemberNum INTEGER
  es400LinkAggrState INTEGER

Es400PortMirrorCtrlEntry  
SEQUENCE    
  es400PortMirrorCtrlIndex INTEGER
  es400PortMirrorCtrlSourcePort INTEGER
  es400PortMirrorCtrlTargetPort INTEGER
  es400PortMirrorCtrlState INTEGER

Es400IgmpSnoopConfigEntry  
SEQUENCE    
  es400IgmpSnoopConfigIndex INTEGER
  es400IgmpSnoopConfigVid INTEGER
  es400IgmpSnoopConfigTimer INTEGER
  es400IgmpSnoopConfigState INTEGER

Es400IgmpSnoopInfoEntry  
SEQUENCE    
  es400IgmpSnoopInfoIndex INTEGER
  es400IgmpSnoopInfoVid INTEGER
  es400IgmpSnoopInfoQueryCount INTEGER
  es400IgmpSnoopInfoTxQueryCount INTEGER

Es400IgmpSnoopEntry  
SEQUENCE    
  es400IgmpSnoopVid INTEGER
  es400IgmpSnoopGroupIpAddr IpAddress
  es400IgmpSnoopMacAddr MacAddress
  es400IgmpSnoopPortMap PortList
  es400IgmpSnoopReportCount INTEGER

Es400MacVlanConfigEntry  
SEQUENCE    
  es400MacVlanDesc DisplayString
  es400MacVlanMacMemberNum INTEGER
  es400MacVlanCtrlState INTEGER

SwMacBaseVlanAddrEntry  
SEQUENCE    
  es400MacVlanAddress MacAddress
  es400MacVlanAddrDesc DisplayString
  es400MacVlanAddrState INTEGER
  es400MacVlanAddrStatus INTEGER

Es400PortVlanDefaultVlanEntry  
SEQUENCE    
  es400PortVlanDefaultPvid INTEGER
  es400PortVlanDefaultDesc DisplayString
  es400PortVlanDefaultPortList PortList
  es400PortVlanDefaultPortNumber INTEGER

Es400PortVlanConfigEntry  
SEQUENCE    
  es400PortVlanConfigPvid INTEGER
  es400PortVlanConfigDesc DisplayString
  es400PortVlanConfigPortList PortList
  es400PortVlanConfigPortNumber INTEGER
  es400PortVlanConfigState INTEGER

Defined Values

intel 1.3.6.1.4.1.343
OBJECT IDENTIFIER    

mib2ext 1.3.6.1.4.1.343.6
OBJECT IDENTIFIER    

es400 1.3.6.1.4.1.343.6.17
OBJECT IDENTIFIER    

es400Agent 1.3.6.1.4.1.343.6.17.1
OBJECT IDENTIFIER    

es400Chassis 1.3.6.1.4.1.343.6.17.2
OBJECT IDENTIFIER    

es400Port 1.3.6.1.4.1.343.6.17.3
OBJECT IDENTIFIER    

es400FDb 1.3.6.1.4.1.343.6.17.4
OBJECT IDENTIFIER    

es400LinkAggr 1.3.6.1.4.1.343.6.17.5
OBJECT IDENTIFIER    

es400PortMirror 1.3.6.1.4.1.343.6.17.6
OBJECT IDENTIFIER    

es400IgmpSnoop 1.3.6.1.4.1.343.6.17.7
OBJECT IDENTIFIER    

es400Vlan 1.3.6.1.4.1.343.6.17.8
OBJECT IDENTIFIER    

es400AgentInfo 1.3.6.1.4.1.343.6.17.1.1
OBJECT IDENTIFIER    

es400AgentRuntimeSwVersion 1.3.6.1.4.1.343.6.17.1.1.1
This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero es400AgentRuntimeSwVersion would be 'Ver. 1.0'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

es400AgentPromFwVersion 1.3.6.1.4.1.343.6.17.1.1.2
This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero es400AgentPromFwVersion would be 'Ver. 1.0'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

es400AgentHwRevision 1.3.6.1.4.1.343.6.17.1.1.3
This is a integer number of the hardware revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400AgentMgmtProtocolCapability 1.3.6.1.4.1.343.6.17.1.1.4
The network management protocol(s) supported by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), snmp-ip(2), snmp-ipx(3), snmp-ip-ipx(4)  

es400AgentMibSupportTable 1.3.6.1.4.1.343.6.17.1.1.5
A list of MIB capability entries supported by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400AgentMibSupportEntry

es400AgentMibSupportEntry 1.3.6.1.4.1.343.6.17.1.1.5.1
A MIB capability entry contains objects describing a particular MIB supported by this agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400AgentMibSupportEntry  

es400AgentMibSupportIndex 1.3.6.1.4.1.343.6.17.1.1.5.1.1
A list of es400AgentMibSupportDescr entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400AgentMibSupportDescr 1.3.6.1.4.1.343.6.17.1.1.5.1.2
The name of the MIB supported by the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

es400AgentMibSupportVersion 1.3.6.1.4.1.343.6.17.1.1.5.1.3
The version of the MIB specified in this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400AgentMibSupportType 1.3.6.1.4.1.343.6.17.1.1.5.1.4
The type of the MIB specified in this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), standard(2), proprietary(3), experiment(4)  

es400AgentConfig 1.3.6.1.4.1.343.6.17.1.2
OBJECT IDENTIFIER    

es400AgentSwUpdateMode 1.3.6.1.4.1.343.6.17.1.2.1
The download media used by the system to download the runtime software.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), network-load(2), out-of-band-load(3)  

es400AgentSwUpdateCtrl 1.3.6.1.4.1.343.6.17.1.2.2
Current status of configuration software download control. The setting is effective the next time you reset or power on the hub.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400AgentBootFile 1.3.6.1.4.1.343.6.17.1.2.3
The name of the configuration file to be downloaded from the TFTP server when software update is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

es400AgentFirmwareUpdateCtrl 1.3.6.1.4.1.343.6.17.1.2.4
Current status of firmware software download control. The setting is effective the next time you reset or power on the hub.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400AgentFirmwareFile 1.3.6.1.4.1.343.6.17.1.2.5
The name of the firmware file to be downloaded from the TFTP server when software update is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

es400AgentSystemReset 1.3.6.1.4.1.343.6.17.1.2.6
This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) will reset the agent. The agent always returns no-reset(4) when this object is read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), cold-start(2), warm-start(3), no-reset(4)  

es400AgentRs232PortConfig 1.3.6.1.4.1.343.6.17.1.2.7
This object indicates the RS-232C mode while device restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), console(2), out-of-band(3)  

es400AgentOutOfBandBaudRateConfig 1.3.6.1.4.1.343.6.17.1.2.8
This object indicates the out_of_band baud rate while device restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), baudRate-2400(2), baudRate-9600(3), baudRate-19200(4), baudRate-38400(5)  

es400AgentIpConfig 1.3.6.1.4.1.343.6.17.1.3
OBJECT IDENTIFIER    

es400AgentIpNumOfIf 1.3.6.1.4.1.343.6.17.1.3.1
The total number of IP interfaces supported by this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400AgentIpIfTable 1.3.6.1.4.1.343.6.17.1.3.2
A list of IP interface entries supported by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400AgentIpIfEntry

es400AgentIpIfEntry 1.3.6.1.4.1.343.6.17.1.3.2.1
An es400AgentIPIfEntry contains information about a particular IP interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400AgentIpIfEntry  

es400AgentIpIfIndex 1.3.6.1.4.1.343.6.17.1.3.2.1.1
This object uniquely identifies the IP interface number in the es400AgentIpIfTable. This value should never greater than es400AgentIpNumOfIf
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

es400AgentIpIfAddress 1.3.6.1.4.1.343.6.17.1.3.2.1.2
The IP address of the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

es400AgentIpIfNetMask 1.3.6.1.4.1.343.6.17.1.3.2.1.3
The IP net mask for this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

es400AgentIpIfDefaultRouter 1.3.6.1.4.1.343.6.17.1.3.2.1.4
The default gateway for this IP interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

es400AgentIpIfMacAddr 1.3.6.1.4.1.343.6.17.1.3.2.1.5
The MAC address of this IP interface. For interfaces which do not have such an address. (e.g., a serial line), this object should contain an octet string of zero length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

es400AgentIpIfType 1.3.6.1.4.1.343.6.17.1.3.2.1.6
The physical layer interface of the IP interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ethernet-csmacd(6), slip(28)  

es400AgentIpBootServerAddr 1.3.6.1.4.1.343.6.17.1.3.3
The IP Address of Boot Server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

es400AgentIpGetIpFromBootpServer 1.3.6.1.4.1.343.6.17.1.3.4
This object indicates whether the agent get its system IP address from Bootp server at start up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400AgentIpUnauthAddr 1.3.6.1.4.1.343.6.17.1.3.5
The IP address of an unauthorized SNMP packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

es400AgentIpUnauthComm 1.3.6.1.4.1.343.6.17.1.3.6
The community string of an unauthorized SNMP packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

es400AgentIpLastBootServerAddr 1.3.6.1.4.1.343.6.17.1.3.7
The last IP address used as Boot server IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

es400AgentIpLastIpAddr 1.3.6.1.4.1.343.6.17.1.3.8
The last IP address used as the agent system IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

es400AgentTrapAddressTable 1.3.6.1.4.1.343.6.17.1.4
A list of trap manager entries to which to send SNMP traps .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400AgentTrapAddressEntry

es400AgentTrapAddressEntry 1.3.6.1.4.1.343.6.17.1.4.1
This entry contains the particular trap manager settings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400AgentTrapAddressEntry  

es400AgentTrapIndex 1.3.6.1.4.1.343.6.17.1.4.1.1
The table index to receive SNMP traps from this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400AgentTrapAddressIp 1.3.6.1.4.1.343.6.17.1.4.1.2
The IP address to receive SNMP traps from this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

es400AgentTrapAddressComm 1.3.6.1.4.1.343.6.17.1.4.1.3
The community string of the SNMP trap packet sent to the trap manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

es400AgentTrapAddressStatus 1.3.6.1.4.1.343.6.17.1.4.1.4
This object indicates whether or not the trap should be send to this trap manager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisInfo 1.3.6.1.4.1.343.6.17.2.1
OBJECT IDENTIFIER    

es400ChassisInfoSystemUpTime 1.3.6.1.4.1.343.6.17.2.1.1
The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in units of seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

es400ChassisInfoTotalNumOfPort 1.3.6.1.4.1.343.6.17.2.1.2
The number of ports within this switch. This value is the sum of the ports within this switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400ChassisInfoNumOfPortInUse 1.3.6.1.4.1.343.6.17.2.1.3
The number of ports in this switch connected to the segment or the end stations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400ChassisInfoConsoleInUse 1.3.6.1.4.1.343.6.17.2.1.4
This usage indication of console system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), in-use(2), not-in-use(3)  

es400ChassisInfoFrontPanelLedStatus 1.3.6.1.4.1.343.6.17.2.1.5
This object is a set of LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is status LED. The other octets following the second octets are the port LED. Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. There is one byte per LED. The most significant bit is used for blink/solid: Off = The LED is lit permanently. On = The LED blinks. The three least significant bits are used for color: 1 = not lit, 2 = green, 3 = yellow,(orange) 4 = blue, 5 = red, 0+6+7 not used The four remaining bits are currently unused and must be 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

es400ChassisInfoSaveCfg 1.3.6.1.4.1.343.6.17.2.1.6
This object indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. proceeding(2) - the device configuration is saving into the NV-RAM. completed(3) - all of the device configuration parameters have been saved into NV-RAM. changed-not-save - some of the device configuration parameters have been changed but not saved into NV-RAM. failed(5) - The processing of saving device configuration is failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), proceeding(2), completed(3), changed-not-save(4), failed(5)  

es400ChassisConfig 1.3.6.1.4.1.343.6.17.2.2
OBJECT IDENTIFIER    

es400ChassisConfigStpState 1.3.6.1.4.1.343.6.17.2.2.1
This object can be enabled or disabled spanning tree algorithm during runtime of the system.When the device is in 802.1Q Vlan mode, this object will be enabled and cannot be disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisConfigIGMPCaptureState 1.3.6.1.4.1.343.6.17.2.2.2
This object indicates Internet Group Management Protocol (IGMP) capture function is enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisConfigPartitionModeState 1.3.6.1.4.1.343.6.17.2.2.3
This object used to enable or disable port auto partition. When the object apply for all ports of the device
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisConfigTableLockState 1.3.6.1.4.1.343.6.17.2.2.4
This object indicates whether the address table is locked. In other words, the address table doesn't learn any more new address. The aging timer is suspended when the address table is locked. As long as the table is locked, all of the frames are dropped if the destination can not be found in the address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisConfigSaveCfg 1.3.6.1.4.1.343.6.17.2.2.5
As the object is set, the current device configuration is save into to NV-RAM.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER  

es400ChassisConfigHOLState 1.3.6.1.4.1.343.6.17.2.2.6
The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea relies on the assumption that it is better to discard packets destined to blocking ports, then to let them consume more and more buffers in the input-port's Rx-counters because eventually these input ports may become totally blocked. The meanings of the values are: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - HOL function disable for device. enabled(3) - HOL function enable for device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisConfigAddrLookupModes 1.3.6.1.4.1.343.6.17.2.2.7
The object provides a way to select the algorithm that optimizes the lookup depending on the network configuration. The setting will be effective after next system reboot. The meanings of the values are: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. sequential-mode(2) - Uses MAC address, optimized for sequential address (basic mode or tag mode). random-mode(3) - Uses MAC address, optimized for random address (basic mode or tag mode).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), sequential-mode(2), random-mode(3)  

es400ChassisConfigUploadImageFileName 1.3.6.1.4.1.343.6.17.2.2.8
The name of the image file to be uploaded from the device to TFTP server when enabling image upload function (by writing es400ChassisConfigUploadImage).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

es400ChassisConfigUploadImage 1.3.6.1.4.1.343.6.17.2.2.9
Image file upload control. Writing it by any value will immediately invoke image upload function.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER  

es400ChassisConfigHighPriorityServiceRatio 1.3.6.1.4.1.343.6.17.2.2.10
The object provides a way to select an internal round-robin priority weight between low-priority queue and high-priority queue. The meanings of the values are: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. pkt-1high-1low(2) - 1 pkt transmitted from HIGH, 1 pkt from LOW. pkt-4high-1low(3) - 4 pkt transmitted from HIGH, 1 pkt from LOW. pkt-8high-1low(4) - 8 pkt transmitted from HIGH, 1 pkt from LOW. pkt-12high-1low(5) - 12 pkt transmitted from HIGH, 1 pkt from LOW. all-high-before-low(6) - all pkt transmitted from HIGH, 0 pkt from LOW. LOW will be served only if HIGH is empty. If HIGH queue is emptied before finishing the count, the count will be reset until next first HIGH comes in.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), pkt-1high-1low(2), pkt-4high-1low(3), pkt-8high-1low(4), pkt-12high-1low(5), all-high-before-low(6)  

es400ChassisAlarm 1.3.6.1.4.1.343.6.17.2.3
OBJECT IDENTIFIER    

es400ChassisAlarmPartition 1.3.6.1.4.1.343.6.17.2.3.1
Depending on this object, the device send a trap or not when any one of the device's ports was partitioned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisAlarmNewRoot 1.3.6.1.4.1.343.6.17.2.3.2
When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisAlarmTopologyChange 1.3.6.1.4.1.343.6.17.2.3.3
This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port tranition, the device doesn't send the trap if this object value is disabled or other.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400ChassisAlarmLinkChange 1.3.6.1.4.1.343.6.17.2.3.4
This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortInfoTable 1.3.6.1.4.1.343.6.17.3.1
A table that contains information about every port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400PortInfoEntry

es400PortInfoEntry 1.3.6.1.4.1.343.6.17.3.1.1
A list of information for each port of the device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400PortInfoEntry  

es400PortInfoIndex 1.3.6.1.4.1.343.6.17.3.1.1.1
This object indicates switch port number.(1..Max port number)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400PortInfoType 1.3.6.1.4.1.343.6.17.3.1.1.2
This object indicates the connector type of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), portType-UTP(2), portType-AUI(3), portType-Fiber(4), portType-BNC(5)  

es400PortInfoLinkStatus 1.3.6.1.4.1.343.6.17.3.1.1.3
This object indicates the port link status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), link-pass(2), link-fail(3)  

es400PortInfoNwayStatus 1.3.6.1.4.1.343.6.17.3.1.1.4
This object indicates the port speed and duplex mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), half-10Mbps(2), full-10Mbps(3), half-100Mbps(4), full-100Mbps(5), half-1Gigabps(6), full-1Gigabps(7)  

es400PortInfoFlowCtrlStatus 1.3.6.1.4.1.343.6.17.3.1.1.5
This object indicates the port flow control status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), flowctrl-disabled(2), flowctrl-enabled(3), backpressure-disabled(4), backpressure-enabled(5)  

es400PortConfigTable 1.3.6.1.4.1.343.6.17.3.2
A table that contains control information about every port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400PortConfigEntry

es400PortConfigEntry 1.3.6.1.4.1.343.6.17.3.2.1
A list of control information for each port of the device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400PortConfigEntry  

es400PortConfigIndex 1.3.6.1.4.1.343.6.17.3.2.1.1
This object indicates the device port number.(1..Max port number)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400PortConfigAdminState 1.3.6.1.4.1.343.6.17.3.2.1.2
This object decide the port enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortConfigLinkStatusAlarmState 1.3.6.1.4.1.343.6.17.3.2.1.3
Depending on this object to determine to send a trap or not when link status changes .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortConfigNwayState 1.3.6.1.4.1.343.6.17.3.2.1.4
Chose the port speed, duplex mode, and N-Way function mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8)  

es400PortConfigFlowCtrlState 1.3.6.1.4.1.343.6.17.3.2.1.5
Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work only when the port is in full duplex mode.If the port is set Auto-negotiation enabled, the object stands for flow control capability. The results should be referred to es400PortInfoFlowCtrlStatus object. If the port is in force mode, this objects is simply used to set the flow control state (on/off). In force mode, if you change it from enabled to disabled state, it will work after next system restart. But the flow control changing from disabled to enabled state, it will immediately work.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortConfigBackPressState 1.3.6.1.4.1.343.6.17.3.2.1.6
Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortConfigLockState 1.3.6.1.4.1.343.6.17.3.2.1.7
The state of this entry. When the es400ChassisConfigTableLockState object is enabled, the state is not changed. The meanings of the values are: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - Port lock funtion disable. enable(3) - Locking a port. Once the port is locked, it will not learn new SA addresses, and drop unknown/moved-SA packets forwarding to/from such ports. This is a way to prevent undesired traffic from being received or transmmited on the port. Note that locking a port doesn't lock the MAC address entries associated with the locked port, i.e. the existing address entries of the locked port will be age out even though it is locked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

es400PortConfigPriority 1.3.6.1.4.1.343.6.17.3.2.1.8
The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destination address. IGMP and BPDU packets are always routed with high priority; packets with unknown unicast destination addresses are always routed with low priority. Other packets follow the rules below: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. default(2) - A packet is normally classified as low priority ,unless at least one of the following is true: .The packet contained a TAG (per 802.1Q definition) with the priority greater or equal to 4. .The address-table entry for the destination address had Pd=HIGH. force-low_priority(3) - A packet is normally classified as low priority. force-high_priority(4) - A packet is normally classified as high priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), default(2), force-low-priority(3), force-high-priority(4)  

es400PortConfigStpState 1.3.6.1.4.1.343.6.17.3.2.1.9
The state of STP(spanning tree algorithm) operation on this port. That's meaning the port whether add in the STP. The value enabled(3) indicates that STP is enabled on this port, as long as es400ChassisConfigStpState is also enabled for this device.When disabled(2) but es400ChassisConfigStpState is still enabled for the device, STP is disabled on this port : any BPDU packets received will be discarded and no BPDU packets will be propagated from the port.When the device is in 802.1Q Vlan mode, this object will be enabled and cannot be disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortConfigHOLState 1.3.6.1.4.1.343.6.17.3.2.1.10
The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port.The idea relies on the assumption that it is better to discard packets destined to blocking ports, then to let them consume more and more buffers in the input-port's Rx-counters because eventually these input ports may become totally blocked. The value enabled(3) indicates that HOL function is enabled on this port, as long as es400ChassisConfigHOLState is also enabled for this device. When disabled(2) but es400ChassisConfigHOLState is still enabled for the device, HOL function is disabled on this port. The meanings of the values are: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - HOL function disable. enabled(3) - HOL function enable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortConfigBroadcastStormThr 1.3.6.1.4.1.343.6.17.3.2.1.11
This object contains the setting of the broadcast storm threshold control on each port. The threshold value is represented by the percentage of the port's total bandwidth used by broadcast traffic. The broadcast storm control function is enabled/disabled by es400PortConfigBroadcastStormCtrl object. When broadcast storm control function is enabled, if broadcast traffic for a port rises above the threshold, the port will be blocked and a trap is sent to management user. When the broadcast storm traffic falls below the threshold, the blocked port will forward packets again and a trap is sent to management user too. The maximum value is 20
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

es400PortConfigBroadcastStormCtrl 1.3.6.1.4.1.343.6.17.3.2.1.12
This object indicates whether to enable the broadcast storm control. Refer to es400PortConfigBroadcastStormThr for details. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - disable the broadcast storm control function . enabled(3) - enable the broadcast storm control function .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortConfigCleanAllStatisticCounter 1.3.6.1.4.1.343.6.17.3.2.1.13
Setting this object will reset current device's all statistic counters.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER  

es400PortStatTable 1.3.6.1.4.1.343.6.17.3.3
A list of port statistic Counter entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400PortStatEntry

es400PortStatEntry 1.3.6.1.4.1.343.6.17.3.3.1
This entry include all the port statistic Counter which support by the device, like Bytes received, Bytes Sent ...
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400PortStatEntry  

es400PortStatIndex 1.3.6.1.4.1.343.6.17.3.3.1.1
This object indicates the device port number.(1..Max port number)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400PortStatByteRx 1.3.6.1.4.1.343.6.17.3.3.1.2
es400ChassisConfigCounterMode = 2(switched-frames):This counter is incre- mented once for every data octet of good packets(unicast + multi- cast + broadcast) received. es400ChassisConfigCounterMode = 3(all-frames):This counter is incremented once for every data octet of good packets(unicast + multicast + broadcast packets) and for local and dropped packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatByteTx 1.3.6.1.4.1.343.6.17.3.3.1.3
This counter is incremented once for every data octet of a trans- mitted good packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFrameRx 1.3.6.1.4.1.343.6.17.3.3.1.4
es400ChassisConfigCounterMode = 2(switched-frames):This counter is incre- mented once for every good packet(unicast + multicast + broadcast ) received. es400ChassisConfigCounterMode = 3(all-frames):This counter is incremented once for every good packet(unicast + multicast + broadcast packets) and for local and dropped packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFrameTx 1.3.6.1.4.1.343.6.17.3.3.1.5
This counter is incremented once for every transmitted good packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatTotalBytesRx 1.3.6.1.4.1.343.6.17.3.3.1.6
This counter is incremented once for every data octet of all received packets. This include data octets of rejected and local packets which are not forwarded to the switching core for trans- mission. This counter should reflect all the data octets received on the line. Note: A nibble is not counted as a whole byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatTotalFramesRx 1.3.6.1.4.1.343.6.17.3.3.1.7
This counter is incremented once for every received packets. This include rejected and local packets which are not forwarded to the switching core for transmission. This counter should reflect all packets received on the line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatBroadcastFramesRx 1.3.6.1.4.1.343.6.17.3.3.1.8
es400ChassisConfigCounterMode = 2(switched-frames):This counter is incre- mented once for every good broadcast packet received. es400ChassisConfigCounterMode = 3(all-frames):This counter is incremented once for every good broadcast packet received and for local and dropped broadcast packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatMulticastFramesRx 1.3.6.1.4.1.343.6.17.3.3.1.9
es400ChassisConfigCounterMode = 2(switched-frames):This counter is incre- mented once for every good multicast packet received. es400ChassisConfigCounterMode = 3(all-frames):This counter is incremented once for every good multicast packet received and for local and dropped multicast packets. This counter does not include broad- cast packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatCRCError 1.3.6.1.4.1.343.6.17.3.3.1.10
This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is between 64 and 1518 bytes inclusive. 2.Packet has invalid CRC. 3.Collision event , late collision event and receive error event have not been detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatOversizeFrames 1.3.6.1.4.1.343.6.17.3.3.1.11
The number of good frames with length more than 1518 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFragments 1.3.6.1.4.1.343.6.17.3.3.1.12
This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is less than 64 bytes or packet withourt SFD and is less than 64 bytes in length. 2.Packet has invalid CRC. 3.Collision event , late collision event and receive error event have not been detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatJabber 1.3.6.1.4.1.343.6.17.3.3.1.13
The number of frames with length more than 1518 bytes and with CRC error or misaligned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatCollision 1.3.6.1.4.1.343.6.17.3.3.1.14
The number of Collisions
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatLateCollision 1.3.6.1.4.1.343.6.17.3.3.1.15
The number of Late Collision(collision occurring later than 576th transmitted bit).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFrames-64-bytes 1.3.6.1.4.1.343.6.17.3.3.1.16
This counter is incremented once for every received and trans- mitted packet with size of 64 bytes. This counter includes reject- ed received and transmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFrames-65-127-bytes 1.3.6.1.4.1.343.6.17.3.3.1.17
This counter is incremented once for every received and trans- mitted packet with size of 65 to 127 bytes. This counter includes rejected received and transmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFrames-128-255-bytes 1.3.6.1.4.1.343.6.17.3.3.1.18
This counter is incremented once for every received and trans- mitted packet with size of 128 to 255 bytes. This counter includes rejected received and transmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFrames-256-511-bytes 1.3.6.1.4.1.343.6.17.3.3.1.19
This counter is incremented once for every received and trans- mitted packet with size of 256 to 511 bytes. This counter includes rejected received and transmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFrames-512-1023-bytes 1.3.6.1.4.1.343.6.17.3.3.1.20
This counter is incremented once for every received and trans- mitted packet with size of 512 to 1023 bytes. This counter includ- es rejected received and transmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFrames-1024-1536-bytes 1.3.6.1.4.1.343.6.17.3.3.1.21
This counter is incremented once for every received and trans- mitted packet with size of 1024 to 1536 bytes. This counter includ- es rejected received and transmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatFramesDroppedFrames 1.3.6.1.4.1.343.6.17.3.3.1.22
This counter is incremented once for every received dropped pack- et.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatMulticastFramesTx 1.3.6.1.4.1.343.6.17.3.3.1.23
The number of multicast frames sent. This counter does not include broadcast packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatBroadcastFramesTx 1.3.6.1.4.1.343.6.17.3.3.1.24
The number of broadcast frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400PortStatUndersizeFrames 1.3.6.1.4.1.343.6.17.3.3.1.25
This counter is incremented once for every received packet which meets all the following conditions: 1.Packet data length is less than 64 bytes. 2.Packet has valid CRC. 3.Collision event , late collision event and receive error event have not been detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

es400FDbStaticTable 1.3.6.1.4.1.343.6.17.4.1
Like typical legacy bridge devices, FDB table records the mapping of Source MAC Address and its associated source port, and forward incoming packets to its destination port according to the Destination MAC Address of the packet as well as the MAC-port pair entries of the FDB table. Note that the priority of FDB table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of FDB Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of FDB Table. See es400FDbFilterTable description also.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400FDbStaticEntry

es400FDbStaticEntry 1.3.6.1.4.1.343.6.17.4.1.1
A list of information specifies which ports the frames with specific destination MAC address to go.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400FDbStaticEntry  

es400FdbStaticVid 1.3.6.1.4.1.343.6.17.4.1.1.1
This object indicates the VLAN-ID. If the es400VlanInfoStatus is port-base mode , the object ranges from 1 to 12. If VLAN is in mac-based mode or disabled, the object indicates the default VLAN-ID (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400FDbStaticAddressIndex 1.3.6.1.4.1.343.6.17.4.1.1.2
The destination MAC address in a frame to which this entry's forwarding information applies. This object can take the value of an unicast address or the multicast address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

es400FDbStaticPortMap 1.3.6.1.4.1.343.6.17.4.1.1.3
The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

es400FDbStaticState 1.3.6.1.4.1.343.6.17.4.1.1.4
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), valid(3)  

es400FDbStaticStatus 1.3.6.1.4.1.343.6.17.4.1.1.5
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. apply(2) - this entry is currently in use and reside in the table. not-apply(3) - this entry is reside in the table but currently not in use due to conflict with filter table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), apply(2), not-apply(3)  

es400FDbFilterTable 1.3.6.1.4.1.343.6.17.4.2
A table which contains the filtering information of the unicast/multicast entries. This table is used by the transparent switching function in determining how to filter the received frames. The Filtering Table entries' priority overrides Static FDB Table as well as IGMP table entries, say, if there is a hash table entry collision between Filtering Table and Static FDB Table setting in the switch device's H/W address table, then Filter Table entry setting overwrites the colliding entry in Static FDB Table. See es400FDbStaticTable description also.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400FDbFilterEntry

es400FDbFilterEntry 1.3.6.1.4.1.343.6.17.4.2.1
A list of information about a specific unicast/multicast MAC address for which the switch has filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400FDbFilterEntry  

es400FdbFilterVid 1.3.6.1.4.1.343.6.17.4.2.1.1
This object indicates the VLAN-ID. If the es400VlanInfoStatus is port-base mode , the object ranges from 1 to 12. If VLAN is in mac-based mode or disabled, the object indicates the default VLAN-ID (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400FDbFilterAddressIndex 1.3.6.1.4.1.343.6.17.4.2.1.2
This object indicates a unicast/multicast MAC address for which the bridge has filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

es400FDbFilterState 1.3.6.1.4.1.343.6.17.4.2.1.3
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. dst-src-addr(2) - recieved frames's destination address or source address are currently used to be filtered as it meets with the MAC address entry of the table. invalid(3) - writing this value to the object, and then the corresponding entry will be removed from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), dst-src-addr(2), invalid(3)  

portPartition 1
The trap is sent whenever the port state enter the Partion mode when more than 61 collisions occur while trasmitting.
TRAP-TYPE    

linkChangeEvent 2
The trap is sent whenever the link state of a port changes from link up to link down or from link down to link up
TRAP-TYPE    

broadcastRisingStorm 3
The trap indicates that broadcast higher rising threshold . This trap including the port ID
TRAP-TYPE    

broadcastFallingStorm 4
The trap indicates that broadcast higher falling threshold . This trap including the port ID
TRAP-TYPE    

es400LinkAggrTable 1.3.6.1.4.1.343.6.17.5.1
This table specifys which ports group a set of ports(up to 8) into a single logical link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400LinkAggrEntry

es400LinkAggrEntry 1.3.6.1.4.1.343.6.17.5.1.1
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400LinkAggrEntry  

es400LinkAggrIndex 1.3.6.1.4.1.343.6.17.5.1.1.1
The index of logical port trunk.The device max support 4 trunk groups. The trunk group number depend on the total number of device ports and the existence of module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400LinkAggrName 1.3.6.1.4.1.343.6.17.5.1.1.2
The name of logical port trunk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(30)  

es400LinkAggrMasterPort 1.3.6.1.4.1.343.6.17.5.1.1.3
The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400LinkAggrMemberNum 1.3.6.1.4.1.343.6.17.5.1.1.4
Indicate how many number of ports is included in this Trunk. If the trunk is located at expansion module (i.e. es400LinkAggrIndex equals to 4(24 ports) or 3(16 ports)) and the module is 100-FX, the maximum number of ports in the trunk is 2. The maximum number of ports is 8 for other trunks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

es400LinkAggrState 1.3.6.1.4.1.343.6.17.5.1.1.5
This object decide the port trunk enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400PortMirrorCtrlTable 1.3.6.1.4.1.343.6.17.6.1
A list of port snooping entries.Port snooping function provide an easy way to monitor traffic on any port. In this way any good packets appears on the source mirror port also shows up on the target mirror port and doesn't to reconstruct the LAN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400PortMirrorCtrlEntry

es400PortMirrorCtrlEntry 1.3.6.1.4.1.343.6.17.6.1.1
A list of information provide an easy way to monitor traffic on any port. The use can bring a fancy network monitor attaching to any target mirror port and set the port to be monitored as source mirror port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400PortMirrorCtrlEntry  

es400PortMirrorCtrlIndex 1.3.6.1.4.1.343.6.17.6.1.1.1
This object indicates the port snooping entry number.There is just only one now.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400PortMirrorCtrlSourcePort 1.3.6.1.4.1.343.6.17.6.1.1.2
This object indicates switch which port will be mirrored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..26  

es400PortMirrorCtrlTargetPort 1.3.6.1.4.1.343.6.17.6.1.1.3
This object indicates switch which port will sniff another port. A aggregate port member cannot be configured as a target mirroring port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..26  

es400PortMirrorCtrlState 1.3.6.1.4.1.343.6.17.6.1.1.4
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - Mirror funtion disable. enable(3) - Mirror funtion enable and mirror received or transmit packet by mirror source port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

es400IgmpSnoopConfigTable 1.3.6.1.4.1.343.6.17.7.1
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (es400VlanInfoStatus). If VLAN is disabled or in Mac-Base mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12. When in 802.1q mode, this entry table is only valid in static registration entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400IgmpSnoopConfigEntry

es400IgmpSnoopConfigEntry 1.3.6.1.4.1.343.6.17.7.1.1
The entry in IGMP control table (es400IgmpSnoopConfigTable). The entry is effective only when IGMP capture switch (es400Chassis- ConfigIGMPCaptureState) is enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400IgmpSnoopConfigEntry  

es400IgmpSnoopConfigIndex 1.3.6.1.4.1.343.6.17.7.1.1.1
This object indicates the IGMP control entry number.Its scale depends on current VLAN state (es400VlanInfoStatus). If VLAN is disabled or in Mac-Base mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries is 12, with index range from 1 to 12.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

es400IgmpSnoopConfigVid 1.3.6.1.4.1.343.6.17.7.1.1.2
This object indicates the IGMP control entry's VLAN id. If VLAN is disabled or in Mac-Base mode, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12 , fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

es400IgmpSnoopConfigTimer 1.3.6.1.4.1.343.6.17.7.1.1.3
The timer value for sending IGMP query packet when none was sent by the multicast router in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997. And it recommends a default of 125 seconds. The timeout value must be at least 30 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 30..9999  

es400IgmpSnoopConfigState 1.3.6.1.4.1.343.6.17.7.1.1.4
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

es400IgmpSnoopInfoTable 1.3.6.1.4.1.343.6.17.7.2
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400IgmpSnoopInfoEntry

es400IgmpSnoopInfoEntry 1.3.6.1.4.1.343.6.17.7.2.1
Information about current IGMP query information, provided that es400ChassisConfigIGMPCaptureState and es400IgmpSnoopConfigState of associated VLAN entry are all enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400IgmpSnoopInfoEntry  

es400IgmpSnoopInfoIndex 1.3.6.1.4.1.343.6.17.7.2.1.1
This object indicates the IGMP query information entry number. It could be up to 12 entries, depending on current number of VLAN entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

es400IgmpSnoopInfoVid 1.3.6.1.4.1.343.6.17.7.2.1.2
This object indicates the Vid of associated IGMP info table entry. It follows es400IgmpSnoopConfigVid in the associated entry of IGMP control table (es400IgmpSnoopConfigTable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400IgmpSnoopInfoQueryCount 1.3.6.1.4.1.343.6.17.7.2.1.3
This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400IgmpSnoopInfoTxQueryCount 1.3.6.1.4.1.343.6.17.7.2.1.4
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400IgmpSnoopTable 1.3.6.1.4.1.343.6.17.7.3
The table containing current IGMP information which captured by this device, provided that es400ChassisConfigIGMPCaptureState and es400IgmpSnoopConfigState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See es400FDbFilterTable description also.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400IgmpSnoopEntry

es400IgmpSnoopEntry 1.3.6.1.4.1.343.6.17.7.3.1
Information about current IGMP information which captured by this device , provided that es400ChassisConfigIGMPCaptureState and es400IgmpSnoopConfigState of associated VLAN entry are all enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400IgmpSnoopEntry  

es400IgmpSnoopVid 1.3.6.1.4.1.343.6.17.7.3.1.1
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400IgmpSnoopGroupIpAddr 1.3.6.1.4.1.343.6.17.7.3.1.2
This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

es400IgmpSnoopMacAddr 1.3.6.1.4.1.343.6.17.7.3.1.3
This object is identify mac address which is corresponding to es400IgmpSnoopGroupIpAddr, in per-Vlan basis..
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

es400IgmpSnoopPortMap 1.3.6.1.4.1.343.6.17.7.3.1.4
This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortList  

es400IgmpSnoopReportCount 1.3.6.1.4.1.343.6.17.7.3.1.5
This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400VlanConfigMode 1.3.6.1.4.1.343.6.17.8.1
This object control which Vlan function will be enable (or disable) when the switch hub restart at the startup (power on) or warm start.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), mac-base(3), port-base(4), ieee8021q(5)  

es400VlanInfoStatus 1.3.6.1.4.1.343.6.17.8.2
This object indicate which Vlan function be enable (or disable) in mandatoryly stage. There are no effect when change es400VlanConfigMode vlaue in the system running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), mac-base(3), port-base(4), ieee8021q(5)  

es400VlanSnmpPortInfo 1.3.6.1.4.1.343.6.17.8.3
This object controls which Vlan is binded with system snmp port. Its scale depends on current VLAN state (es400VlanInfoStatus). If VLAN is disabled or in Mac-Base mode, the Vid is always 0 and cannot be changed by management users. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user. If VLAN is in Port-Base mode, the Vid setting can vary from 1 to 12 by management user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  VlanIndex 1..4094  

es400MacVlan 1.3.6.1.4.1.343.6.17.8.4
OBJECT IDENTIFIER    

es400MacVlanTotalNum 1.3.6.1.4.1.343.6.17.8.4.1
The total number of Mac base Vlan within this switch hub.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400MacVlanConfigTable 1.3.6.1.4.1.343.6.17.8.4.2
A table that contains MAC-Based VLAN list entries for the switch. Management users can create a MAC-Based VLAN entry by adding a new list (es400MacVlanConfigEntry) in this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400MacVlanConfigEntry

es400MacVlanConfigEntry 1.3.6.1.4.1.343.6.17.8.4.2.1
A list of information about a specific MAC-Based VLAN configuration in es400MacVlanConfigTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400MacVlanConfigEntry  

es400MacVlanDesc 1.3.6.1.4.1.343.6.17.8.4.2.1.1
A textual description of the Mac Base Vlan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

es400MacVlanMacMemberNum 1.3.6.1.4.1.343.6.17.8.4.2.1.2
This object indicates the total number of MAC addresses contained in the VLAN entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400MacVlanCtrlState 1.3.6.1.4.1.343.6.17.8.4.2.1.3
This object indicates the MacBase Vlan state. Writing disabled value to the object will remove the corresponding entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

es400MacVlanAddrTotalNum 1.3.6.1.4.1.343.6.17.8.4.3
The total number of Mac base Vlan address entry within this switch hub.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400MacVlanAddrTable 1.3.6.1.4.1.343.6.17.8.4.4
A table that contains information about unicast entries for which the switch has forwarding and/or filtering information. This information is used by the transparent switching function in determining how to propagate a received frame. Note that the priority of MacVlanAddr table entries is lowest than Filtering Table and FDB Table, i.e. if there is a table hash collision between the entries of MacVlanAddr Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of MacVlanAddr Table. This state is same of FDB table. See es400FDbFilterTable and es400FDbStaticTable description also.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwMacBaseVlanAddrEntry

es400MacVlanAddrEntry 1.3.6.1.4.1.343.6.17.8.4.4.1
A list of information about a specific unicast MAC address for which the switch has some forwarding and/or filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SwMacBaseVlanAddrEntry  

es400MacVlanAddress 1.3.6.1.4.1.343.6.17.8.4.4.1.1
This object indictaes a unicast MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

es400MacVlanAddrDesc 1.3.6.1.4.1.343.6.17.8.4.4.1.2
This object references to the MAC-Base VLAN description (es400MacVlanDesc) which the MAC address belong to. You must update the VLAN description with an VLAN description which is already exist on MAC-Base VLAN control table. If the VLAN description on the MAC-Base VLAN control table doesn't exist , the corresponding entry will be removed from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..12)  

es400MacVlanAddrState 1.3.6.1.4.1.343.6.17.8.4.4.1.3
This object indicates the MacBase Vlan Address entry state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), valid(3)  

es400MacVlanAddrStatus 1.3.6.1.4.1.343.6.17.8.4.4.1.4
This object indicates the MacBase Vlan Address entry state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. apply(2) - this entry is currently in use and reside in the table. not-apply(3) - this entry is reside in the table but currently not in use due to conflict with filter table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), apply(2), not-apply(3)  

es400PortVlan 1.3.6.1.4.1.343.6.17.8.5
OBJECT IDENTIFIER    

es400PortVlanTotalNum 1.3.6.1.4.1.343.6.17.8.5.1
The total number of Port-Base Vlan which is in enabled state within this switch hub.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400PortVlanDefaultVlanTable 1.3.6.1.4.1.343.6.17.8.5.2
A table that contains default Port-Based VLAN list entries for the switch. The entry (Vid = 1,i.e. es400PortVlanDefaultPvid = 1) is defalut Port-Based VLAN , maintained by system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400PortVlanDefaultVlanEntry

es400PortVlanDefaultVlanEntry 1.3.6.1.4.1.343.6.17.8.5.2.1
A list of default Port-Based VLAN information in es400PortVlanDefaultVlanTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400PortVlanDefaultVlanEntry  

es400PortVlanDefaultPvid 1.3.6.1.4.1.343.6.17.8.5.2.1.1
This object indicates the default Port-Base Vlan ID. It occupies only 1 entry in VLAN table, with VID=1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400PortVlanDefaultDesc 1.3.6.1.4.1.343.6.17.8.5.2.1.2
A textual description of the Port-Base Vlan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

es400PortVlanDefaultPortList 1.3.6.1.4.1.343.6.17.8.5.2.1.3
This object indicates the port member set of the specified Vlan. Each Vlan has a octect string to indicate the port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortList  

es400PortVlanDefaultPortNumber 1.3.6.1.4.1.343.6.17.8.5.2.1.4
This object indicates the number of ports of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400PortVlanConfigTable 1.3.6.1.4.1.343.6.17.8.5.3
A table that contains Port-Based VLAN list entries for the switch. The device can't support port overlapping in Port-Based VLAN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Es400PortVlanConfigEntry

es400PortVlanConfigEntry 1.3.6.1.4.1.343.6.17.8.5.3.1
A list of information about a specific Port-Based VLAN configuration in es400PortVlanConfigTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Es400PortVlanConfigEntry  

es400PortVlanConfigPvid 1.3.6.1.4.1.343.6.17.8.5.3.1.1
This object indicates the Port-Base Vlan ID. There are up to 11 entries for current product now. The object range varies from 2 to 12.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

es400PortVlanConfigDesc 1.3.6.1.4.1.343.6.17.8.5.3.1.2
A textual description of the Port-Base Vlan. It cannot be a null string. And each description must be unique in the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..12)  

es400PortVlanConfigPortList 1.3.6.1.4.1.343.6.17.8.5.3.1.3
This object indicates which ports are belong to the Vlan. Each Vlan has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortList  

es400PortVlanConfigPortNumber 1.3.6.1.4.1.343.6.17.8.5.3.1.4
This object indicates the number of ports of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

es400PortVlanConfigState 1.3.6.1.4.1.343.6.17.8.5.3.1.5
This object indicates the Port-Base Vlan state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - writing this value to the object, and then the corresponding entry will be removed from the table. enabled(3) - this entry is reside in the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)