INFORMANT-WMI-CITRIX

File: INFORMANT-WMI-CITRIX.mib (96697 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC WTCS

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
Gauge32 Integer32 Counter64
DateAndTime TruthValue DisplayString
informant

Defined Types

CitrixAccountAuthority  
SEQUENCE    
  ctxAccountAuthorityIndex Integer32
  ctxAccountAuthorityName DisplayString
  ctxAccountAuthorityType INTEGER

CitrixApplicationFolder  
SEQUENCE    
  ctxApplicationFolderIndex Integer32
  ctxApplicationFolderFolderDN DisplayString
  ctxApplicationFolderFolderName DisplayString

CitrixGroup  
SEQUENCE    
  ctxGroupIndex Integer32
  ctxGroupAccAuthority DisplayString
  ctxGroupAccountType INTEGER
  ctxGroupGroupName DisplayString

CitrixServerFolder  
SEQUENCE    
  ctxServerFolderIndex Integer32
  ctxServerFolderFolderDN DisplayString
  ctxServerFolderFolderName DisplayString

CitrixServersInFolder  
SEQUENCE    
  ctxServersInFolderIndex Integer32
  ctxServersInFolderAntecedent DisplayString
  ctxServersInFolderDependent DisplayString

CitrixServersInZone  
SEQUENCE    
  ctxServersInZoneIndex Integer32
  ctxServersInZoneServer DisplayString
  ctxServersInZoneZone DisplayString

CitrixUser  
SEQUENCE    
  ctxUserIndex Integer32
  ctxUserAccAuthority DisplayString
  ctxUserAccountType INTEGER
  ctxUserUserName DisplayString

CitrixUsersInGroup  
SEQUENCE    
  ctxUsersInGroupIndex Integer32
  ctxUsersInGroupAntecedent DisplayString
  ctxUsersInGroupDependent DisplayString

CitrixZone  
SEQUENCE    
  ctxZoneIndex Integer32
  ctxZoneDataCollector DisplayString
  ctxZoneNumServersInZone Gauge32
  ctxZoneZoneName DisplayString

MetaFrameApplicationLoadLevel  
SEQUENCE    
  mfApplicationLoadLevelIndex Integer32
  mfApplicationLoadLevelAppName DisplayString
  mfApplicationLoadLevelLoadLevel Gauge32
  mfApplicationLoadLevelServerName DisplayString

MetaFrameApplPublishOnServer  
SEQUENCE    
  mfaposIndex Integer32
  mfaposCtxServer DisplayString
  mfaposWinApp DisplayString

MetaFrameApplRunningOnServer  
SEQUENCE    
  mfarosIndex Integer32
  mfarosApplication DisplayString
  mfarosProcessId INTEGER
  mfarosServer DisplayString

MetaFrameAppsForGroup  
SEQUENCE    
  mfAppsForGroupIndex Integer32
  mfAppsForGroupAntecedent DisplayString
  mfAppsForGroupDependent DisplayString

MetaFrameAppsInFolder  
SEQUENCE    
  mfAppsInFolderIndex Integer32
  mfAppsInFolderAntecedent DisplayString
  mfAppsInFolderDependent DisplayString

MetaFrameAppsInSession  
SEQUENCE    
  mfAppsInSessionIndex Integer32
  mfAppsInSessionAntecedent DisplayString
  mfAppsInSessionDependent DisplayString

MetaFrameDisconnSessionHappening  
SEQUENCE    
  mfdshIndex Integer32
  mfdshHowMany INTEGER
  mfdshWhen DateAndTime

MetaFrameICAClient  
SEQUENCE    
  mfICAClientIndex Integer32
  mfICAClientClientAddress DisplayString
  mfICAClientClientAddrFamily INTEGER
  mfICAClientClientBuild INTEGER
  mfICAClientClientCacheDisk INTEGER
  mfICAClientClientCacheLowMem INTEGER
  mfICAClientClientCacheTiny INTEGER
  mfICAClientClientCacheXms INTEGER
  mfICAClientClientColorDepth INTEGER
  mfICAClientClientDimBitmapMin INTEGER
  mfICAClientClientDimCacheSize INTEGER
  mfICAClientClientDimVersion INTEGER
  mfICAClientClientDirectory DisplayString
  mfICAClientClientEncryption DisplayString
  mfICAClientClientHardwareID Gauge32
  mfICAClientClientHRes INTEGER
  mfICAClientClientLicense DisplayString
  mfICAClientClientModemName DisplayString
  mfICAClientClientName DisplayString
  mfICAClientClientProductID INTEGER
  mfICAClientClientProductIDValue INTEGER
  mfICAClientClientVRes INTEGER
  mfICAClientICABufLen INTEGER

MetaFrameInstalledSoftware  
SEQUENCE    
  mfInstalledSoftwareIndex Integer32
  mfInstalledSoftwareServer DisplayString
  mfInstalledSoftwareSoftware DisplayString

MetaFrameProcess  
SEQUENCE    
  mfProcessIndex Integer32
  mfProcessProcessID Gauge32
  mfProcessProcessName DisplayString
  mfProcessProcessState INTEGER
  mfProcessServerName DisplayString
  mfProcessSessionID Gauge32
  mfProcessUserName DisplayString

MetaFrameProcessesInSession  
SEQUENCE    
  mfProcessesInSessionIndex Integer32
  mfProcessesInSessionAntecedent DisplayString
  mfProcessesInSessionDependent DisplayString

MetaFrameSchemaVersion  
SEQUENCE    
  mfSchemaVersionIndex Integer32
  mfSchemaVersionVersion DisplayString

MetaFrameServer  
SEQUENCE    
  mfServerIndex Integer32
  mfServerDomain DisplayString
  mfServerFarmName DisplayString
  mfServerIPAddress DisplayString
  mfServerLoginsEnabled TruthValue
  mfServerNumberOfActiveSessions INTEGER
  mfServerNumOfDisconnectSessions INTEGER
  mfServerNumberOfSessions INTEGER
  mfServerServerName DisplayString
  mfServerServerType INTEGER
  mfServerZoneName DisplayString
  mfServerZoneRanking INTEGER

MetaFrameServerLoadLevel  
SEQUENCE    
  mfServerLoadLevelIndex Integer32
  mfServerLoadLevelLoadLevel Gauge32
  mfServerLoadLevelServerName DisplayString

MetaFrameSession  
SEQUENCE    
  mfSessionIndex Integer32
  mfSessionClient DisplayString
  mfSessionConnectTime DateAndTime
  mfSessionCurrentTime DateAndTime
  mfSessionDisconnectTime DateAndTime
  mfSessionLastInputTime DateAndTime
  mfSessionLogonTime DateAndTime
  mfSessionNumberOfApps INTEGER
  mfSessionServerName DisplayString
  mfSessionSessionID INTEGER
  mfSessionSessionName DisplayString
  mfSessionSessionState INTEGER
  mfSessionSessionUser DisplayString

MetaFrameSoftware  
SEQUENCE    
  mfSoftwareIndex Integer32
  mfSoftwareFeatureReleaseLevel Gauge32
  mfSoftwareInstallDate DateAndTime
  mfSoftwareMFWinProductCode DisplayString
  mfSoftwareProductName DisplayString
  mfSoftwareReleaseLevel DisplayString
  mfSoftwareVersion DisplayString

MetaFrameWinApplication  
SEQUENCE    
  mfWinApplIndex Integer32
  mfWinApplApplicationID DisplayString
  mfWinApplAppVersion INTEGER
  mfWinApplBrowserName DisplayString
  mfWinApplDefaultEncryption INTEGER
  mfWinApplDefaultInitProg DisplayString
  mfWinApplDefaultSoundType INTEGER
  mfWinApplDefaultWindowColor INTEGER
  mfWinApplDefaultWindowHeight INTEGER
  mfWinApplDefaultWindowScale INTEGER
  mfWinApplDefaultWindowType INTEGER
  mfWinApplDefaultWindowWidth INTEGER
  mfWinApplDefaultWorkDir DisplayString
  mfWinApplDescription DisplayString
  mfWinApplDesktopIntegrate INTEGER
  mfWinApplDistinguishedName DisplayString
  mfWinApplEnableApp TruthValue
  mfWinApplFarmName DisplayString
  mfWinApplMFAttributes INTEGER
  mfWinApplName DisplayString
  mfWinApplParentFolderDN DisplayString
  mfWinApplPNAttributes INTEGER
  mfWinApplPNFolder DisplayString
  mfWinApplPublishingFlags INTEGER
  mfWinApplReadOnly TruthValue

MetaFrameWinFarm  
SEQUENCE    
  mfWinFarmIndex Integer32
  mfWinFarmAlternateCachingMethod TruthValue
  mfWinFarmDCRespondToClientBdcst TruthValue
  mfWinFarmDegradationBias INTEGER
  mfWinFarmDisableClientLocalTmEst TruthValue
  mfWinFarmDiscardRedundantGraphic TruthValue
  mfWinFarmEnableAutoClientReconn TruthValue
  mfWinFarmEnableDNSAddrResolution TruthValue
  mfWinFarmEnableSNMPAgent TruthValue
  mfWinFarmFarmName DisplayString
  mfWinFarmICAVideoBufferSize INTEGER
  mfWinFarmLegacyDisplayCompatMode TruthValue
  mfWinFarmLegacyServerCompatMode TruthValue
  mfWinFarmLogAutoReconnectAttempt TruthValue
  mfWinFarmLogOverLimitDenials TruthValue
  mfWinFarmMaxConnectionsPerUser INTEGER
  mfWinFarmNotifyDegradation TruthValue
  mfWinFarmRASRespondToClientBdcst TruthValue
  mfWinFarmSNMPDisconnectTrap TruthValue
  mfWinFarmSNMPLogoffTrap TruthValue
  mfWinFarmSNMPLogonTrap TruthValue
  mfWinFarmSNMPThresholdExceedTrap TruthValue
  mfWinFarmSNMPThresholdValue INTEGER
  mfWinFarmUseClientLocalTime TruthValue

CitrixGTLicense  
SEQUENCE    
  ctxGTLicenseIndex Integer32
  ctxGTLicenseCount Gauge32
  ctxGTLicenseExpirationDate DateAndTime
  ctxGTLicenseLicenseType DisplayString
  ctxGTLicenseOverdraft Gauge32
  ctxGTLicensePLD DisplayString
  ctxGTLicensePLDFullName DisplayString
  ctxGTLicenseSerialNumber DisplayString
  ctxGTLicenseSubscriptionDate DateAndTime

CitrixGTLicensePool  
SEQUENCE    
  ctxGTLicensePoolIndex Integer32
  ctxGTLicensePoolCount Gauge32
  ctxGTLicensePoolDUPGROUP Gauge32
  ctxGTLicensePoolFLOATOK TruthValue
  ctxGTLicensePoolHOSTBASED Gauge32
  ctxGTLicensePoolHOSTID DisplayString
  ctxGTLicensePoolInUseCount Gauge32
  ctxGTLicensePoolLicenseType DisplayString
  ctxGTLicensePoolOverdraft Gauge32
  ctxGTLicensePoolPLATFORMS DisplayString
  ctxGTLicensePoolPLD DisplayString
  ctxGTLicensePoolPLDFullName DisplayString
  ctxGTLicensePoolPooledAvailable Gauge32
  ctxGTLicensePoolSubscriptionDate DateAndTime
  ctxGTLicensePoolUSERBASED Gauge32
  ctxGTLicensePoolVendorString DisplayString

CitrixGTLicensesInLicensePool  
SEQUENCE    
  ctxgtllpIndex Integer32
  ctxgtllpLicense DisplayString
  ctxgtllpPool DisplayString

CitrixLicensingSchemaVersion  
SEQUENCE    
  ctxLicensingSchemaVersionIndex Integer32
  ctxLicensingSchemaVersionVersion DisplayString

Defined Values

citrixWmi 1.3.6.1.4.1.9600.1.42
The MIB module for informant Citrix WMI entities.
MODULE-IDENTITY    

citrixWmiCitrix 1.3.6.1.4.1.9600.1.42.1
Provides WMI information on the Citrix Application Services
Status: current Access: read-only
OBJECT-IDENTITY    

citrixAccountAuthorityTable 1.3.6.1.4.1.9600.1.42.1.1
The user authentication entities, typically NT Domains.Enumerate this class to get all Acc Authorities in current farm
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixAccountAuthority

citrixAccountAuthorityEntry 1.3.6.1.4.1.9600.1.42.1.1.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixAccountAuthority  

ctxAccountAuthorityIndex 1.3.6.1.4.1.9600.1.42.1.1.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxAccountAuthorityName 1.3.6.1.4.1.9600.1.42.1.1.1.2
The account authority name. For Windows NT domain and ADS users, the account authority name is the domain name. For NDS, this is the NDS tree name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxAccountAuthorityType 1.3.6.1.4.1.9600.1.42.1.1.1.3
The account authority type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownAccountAuthority(0), windowsNTDomainOrADS(1)  

citrixApplicationFolderTable 1.3.6.1.4.1.9600.1.42.1.2
Applications can be organised by folder for Administrative convenience
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixApplicationFolder

citrixApplicationFolderEntry 1.3.6.1.4.1.9600.1.42.1.2.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixApplicationFolder  

ctxApplicationFolderIndex 1.3.6.1.4.1.9600.1.42.1.2.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxApplicationFolderFolderDN 1.3.6.1.4.1.9600.1.42.1.2.1.2
Get the folder?s distinguished name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxApplicationFolderFolderName 1.3.6.1.4.1.9600.1.42.1.2.1.3
Get the name of the folder object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixGroupTable 1.3.6.1.4.1.9600.1.42.1.3
Equivalent data but deliberately kept separate from CIMv2 alternatives for simplicity & to avoid cross namespace searches. See CIMv2:Win32_Group for full OS settings
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixGroup

citrixGroupEntry 1.3.6.1.4.1.9600.1.42.1.3.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixGroup  

ctxGroupIndex 1.3.6.1.4.1.9600.1.42.1.3.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxGroupAccAuthority 1.3.6.1.4.1.9600.1.42.1.3.1.2
Authority in which this group exists
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGroupAccountType 1.3.6.1.4.1.9600.1.42.1.3.1.3
The account authority type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownAccountType(0), localGroup(1), globalGroup(2), universalGroup(3), domainLocalGroup(4)  

ctxGroupGroupName 1.3.6.1.4.1.9600.1.42.1.3.1.4
Get the group name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixServerFolderTable 1.3.6.1.4.1.9600.1.42.1.4
Servers can be grouped by Folder for administrative convenience
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixServerFolder

citrixServerFolderEntry 1.3.6.1.4.1.9600.1.42.1.4.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixServerFolder  

ctxServerFolderIndex 1.3.6.1.4.1.9600.1.42.1.4.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxServerFolderFolderDN 1.3.6.1.4.1.9600.1.42.1.4.1.2
Get the folder?s distinguished name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxServerFolderFolderName 1.3.6.1.4.1.9600.1.42.1.4.1.3
Get the name of the folder object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixServersInFolderTable 1.3.6.1.4.1.9600.1.42.1.5
Enumeration gives all Servers currently organised into a particular folder
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixServersInFolder

citrixServersInFolderEntry 1.3.6.1.4.1.9600.1.42.1.5.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixServersInFolder  

ctxServersInFolderIndex 1.3.6.1.4.1.9600.1.42.1.5.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxServersInFolderAntecedent 1.3.6.1.4.1.9600.1.42.1.5.1.2
Get the folder?s distinguished name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxServersInFolderDependent 1.3.6.1.4.1.9600.1.42.1.5.1.3
The name of the server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixServersInZoneTable 1.3.6.1.4.1.9600.1.42.1.6
Servers collected in a Zone
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixServersInZone

citrixServersInZoneEntry 1.3.6.1.4.1.9600.1.42.1.6.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixServersInZone  

ctxServersInZoneIndex 1.3.6.1.4.1.9600.1.42.1.6.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxServersInZoneServer 1.3.6.1.4.1.9600.1.42.1.6.1.2
The name of the server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxServersInZoneZone 1.3.6.1.4.1.9600.1.42.1.6.1.3
Zone in which this server operates
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixUserTable 1.3.6.1.4.1.9600.1.42.1.7
Equivalent data but deliberately kept separate from CIMv2 alternatives for simplicity & to avoid cross namespace searches. See CIMv2:Win32_Account for full OS settings
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixUser

citrixUserEntry 1.3.6.1.4.1.9600.1.42.1.7.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixUser  

ctxUserIndex 1.3.6.1.4.1.9600.1.42.1.7.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxUserAccAuthority 1.3.6.1.4.1.9600.1.42.1.7.1.2
Authority in which this user exists
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxUserAccountType 1.3.6.1.4.1.9600.1.42.1.7.1.3
The account type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownAccountType(0), localUser(1), domainUser(2)  

ctxUserUserName 1.3.6.1.4.1.9600.1.42.1.7.1.4
The user name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixUsersInGroupTable 1.3.6.1.4.1.9600.1.42.1.8
No GroupsForUser at the moment unless performance reasons require it
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixUsersInGroup

citrixUsersInGroupEntry 1.3.6.1.4.1.9600.1.42.1.8.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixUsersInGroup  

ctxUsersInGroupIndex 1.3.6.1.4.1.9600.1.42.1.8.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxUsersInGroupAntecedent 1.3.6.1.4.1.9600.1.42.1.8.1.2
Get the group name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxUsersInGroupDependent 1.3.6.1.4.1.9600.1.42.1.8.1.3
Get the user name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixZoneTable 1.3.6.1.4.1.9600.1.42.1.9
Subset of servers in a Farm used for data collection efficiency. An enumeration of these instances gives all the Zones in a Farm
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixZone

citrixZoneEntry 1.3.6.1.4.1.9600.1.42.1.9.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixZone  

ctxZoneIndex 1.3.6.1.4.1.9600.1.42.1.9.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxZoneDataCollector 1.3.6.1.4.1.9600.1.42.1.9.1.2
One Server in a Zone is elected as the data collector for the other servers
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxZoneNumServersInZone 1.3.6.1.4.1.9600.1.42.1.9.1.3
Too many servers in a Zone can deteriorate data collection performance
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxZoneZoneName 1.3.6.1.4.1.9600.1.42.1.9.1.4
Get the name of the zone
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeApplLoadLevelTable 1.3.6.1.4.1.9600.1.42.1.10
Load Manager load value for Published Applications. Enumeration just gives application load for the local server
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameApplicationLoadLevel

metaframeApplLoadLevelEntry 1.3.6.1.4.1.9600.1.42.1.10.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameApplicationLoadLevel  

mfApplicationLoadLevelIndex 1.3.6.1.4.1.9600.1.42.1.10.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfApplicationLoadLevelAppName 1.3.6.1.4.1.9600.1.42.1.10.1.2
Get the application name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfApplicationLoadLevelLoadLevel 1.3.6.1.4.1.9600.1.42.1.10.1.3
Get the load level
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

mfApplicationLoadLevelServerName 1.3.6.1.4.1.9600.1.42.1.10.1.4
Get the server name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeApplPublishOnSvrTable 1.3.6.1.4.1.9600.1.42.1.11
The set of applications that can be run from this server. Enumeration gives applications published across the farm
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameApplPublishOnServer

metaframeApplPublishOnSvrEntry 1.3.6.1.4.1.9600.1.42.1.11.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameApplPublishOnServer  

mfaposIndex 1.3.6.1.4.1.9600.1.42.1.11.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfaposCtxServer 1.3.6.1.4.1.9600.1.42.1.11.1.2
Return the server name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfaposWinApp 1.3.6.1.4.1.9600.1.42.1.11.1.3
Return the application name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeApplRunOnServerTable 1.3.6.1.4.1.9600.1.42.1.12
The set of applications that are currently executing on this server
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameApplRunningOnServer

metaframeApplRunOnServerEntry 1.3.6.1.4.1.9600.1.42.1.12.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameApplRunningOnServer  

mfarosIndex 1.3.6.1.4.1.9600.1.42.1.12.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfarosApplication 1.3.6.1.4.1.9600.1.42.1.12.1.2
Return the appliation name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfarosProcessId 1.3.6.1.4.1.9600.1.42.1.12.1.3
Return the process ID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfarosServer 1.3.6.1.4.1.9600.1.42.1.12.1.4
Get the name of the server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeAppsForGroupTable 1.3.6.1.4.1.9600.1.42.1.13
The Applications that are published for a particular group
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameAppsForGroup

metaframeAppsForGroupEntry 1.3.6.1.4.1.9600.1.42.1.13.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameAppsForGroup  

mfAppsForGroupIndex 1.3.6.1.4.1.9600.1.42.1.13.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfAppsForGroupAntecedent 1.3.6.1.4.1.9600.1.42.1.13.1.2
Get the group name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfAppsForGroupDependent 1.3.6.1.4.1.9600.1.42.1.13.1.3
Get the application name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeAppsInFolderTable 1.3.6.1.4.1.9600.1.42.1.14
No Description
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameAppsInFolder

metaframeAppsInFolderEntry 1.3.6.1.4.1.9600.1.42.1.14.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameAppsInFolder  

mfAppsInFolderIndex 1.3.6.1.4.1.9600.1.42.1.14.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfAppsInFolderAntecedent 1.3.6.1.4.1.9600.1.42.1.14.1.2
Get the name of the folder object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfAppsInFolderDependent 1.3.6.1.4.1.9600.1.42.1.14.1.3
Get the application name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeAppsInSessionTable 1.3.6.1.4.1.9600.1.42.1.15
Sessions have a primary app but can also enumerate all apps within a session
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameAppsInSession

metaframeAppsInSessionEntry 1.3.6.1.4.1.9600.1.42.1.15.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameAppsInSession  

mfAppsInSessionIndex 1.3.6.1.4.1.9600.1.42.1.15.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfAppsInSessionAntecedent 1.3.6.1.4.1.9600.1.42.1.15.1.2
Get the session name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfAppsInSessionDependent 1.3.6.1.4.1.9600.1.42.1.15.1.3
Get the application name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeDisconnectSessionTable 1.3.6.1.4.1.9600.1.42.1.16
Record of Disconnected Session occurences. Note that timestamps are serverspecific and cannot be guaranteed to match across different machines.Generated when a session disconnect occurs while subscribing to MetaFrameEvent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameDisconnSessionHappening

metaframeDisconnectSessionEntry 1.3.6.1.4.1.9600.1.42.1.16.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameDisconnSessionHappening  

mfdshIndex 1.3.6.1.4.1.9600.1.42.1.16.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfdshHowMany 1.3.6.1.4.1.9600.1.42.1.16.1.2
How Many events occurred since the last Happening was recordedFor those events where not all instances can be captured
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfdshWhen 1.3.6.1.4.1.9600.1.42.1.16.1.3
Get the time of the last Happening event
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

metaframeICAClientTable 1.3.6.1.4.1.9600.1.42.1.17
Attributes of the client used to connect to a session
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameICAClient

metaframeICAClientEntry 1.3.6.1.4.1.9600.1.42.1.17.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameICAClient  

mfICAClientIndex 1.3.6.1.4.1.9600.1.42.1.17.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfICAClientClientAddress 1.3.6.1.4.1.9600.1.42.1.17.1.2
Get the client?s address. The returned client address is a string; this is the network address of the client. The address type is returned by the get_ClientAddrFamily call. If the address is an IP address, the returned string is in dotted-decimal format.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfICAClientClientAddrFamily 1.3.6.1.4.1.9600.1.42.1.17.1.3
Get the client?s address family. This property indicates the network protocol used by the client to connect to the MetaFrame XP server. Use the ClientAddress property to get the client address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unspecifiedProtocol(0), internetProtocolIP(1), novellIPXSPX(2), microsoftNetBIOS(3)  

mfICAClientClientBuild 1.3.6.1.4.1.9600.1.42.1.17.1.4
Get the client?s build number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientCacheDisk 1.3.6.1.4.1.9600.1.42.1.17.1.5
Get the client?s disk cache size.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientCacheLowMem 1.3.6.1.4.1.9600.1.42.1.17.1.6
Return the client cache size for low/virtual memory.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientCacheTiny 1.3.6.1.4.1.9600.1.42.1.17.1.7
Get the client?s cache size for small objects.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientCacheXms 1.3.6.1.4.1.9600.1.42.1.17.1.8
Return the client cache size for XMS memory.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientColorDepth 1.3.6.1.4.1.9600.1.42.1.17.1.9
Get the client display?s color depth. This returns the client display?s color depth, not the session?s color depth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientDimBitmapMin 1.3.6.1.4.1.9600.1.42.1.17.1.10
Return the client persistent cache minimum bitmap size.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientDimCacheSize 1.3.6.1.4.1.9600.1.42.1.17.1.11
Return the client persistent cache size.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientDimVersion 1.3.6.1.4.1.9600.1.42.1.17.1.12
Get the client?s persistent cache version.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientDirectory 1.3.6.1.4.1.9600.1.42.1.17.1.13
Get the client?s directory. This directory is the full path name on the client device where the client software is installed.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfICAClientClientEncryption 1.3.6.1.4.1.9600.1.42.1.17.1.14
Get the client?s encryption level. This returns the encryption level at which the connection was made.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfICAClientClientHardwareID 1.3.6.1.4.1.9600.1.42.1.17.1.15
Get the client?s hardware ID. The ID returned is a serial number generated by the client. Do not use this as a unique client identifier. Instead, use the client?s IP address or client name to identify a client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

mfICAClientClientHRes 1.3.6.1.4.1.9600.1.42.1.17.1.16
Get the client display?s horizontal resolution. This is the client system?s display resolution, not the session?s horizontal resolution.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientLicense 1.3.6.1.4.1.9600.1.42.1.17.1.17
Get the client?s license. This applies only to clients that have and use client connection licenses. This call should be ignored for MetaFrame XP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfICAClientClientModemName 1.3.6.1.4.1.9600.1.42.1.17.1.18
Get the client?s modem name. This property is valid only if the session is connected using a dial-up line. This name is empty if the session is connected using a LAN.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfICAClientClientName 1.3.6.1.4.1.9600.1.42.1.17.1.19
Return the session client name. The session client name is usually the client device name. The client user can change the client device name to a string that is a valid client name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfICAClientClientProductID 1.3.6.1.4.1.9600.1.42.1.17.1.20
Get the client product ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownClient(0), windows32Bit(1), windows16Bit(2), dos32Bit(3), dos32Bit2(4), windowsCE(5), unix(6), java(7), web(8), citrixDirectICAStation(9), citrixTextTerminal(10), citrixConsole(11), citrixMacClient(12), oemAndOther(13)  

mfICAClientClientProductIDValue 1.3.6.1.4.1.9600.1.42.1.17.1.21
Returns the client's product ID value. Use this property to obtain the value of the client product ID. The value returned by the ClientProductID property is the client product type. This property returns the actual client product ID as shown in the Management Console for MetaFrame XP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientClientVRes 1.3.6.1.4.1.9600.1.42.1.17.1.22
Get the client display?s vertical resolution. This is the client machine?s display vertical resolution, not the session?s vertical resolution.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfICAClientICABufLen 1.3.6.1.4.1.9600.1.42.1.17.1.23
Return the ICA buffer length of the session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

metaframeInstalledSoftwareTable 1.3.6.1.4.1.9600.1.42.1.18
Association class used to determine the details of the MF software on all servers in the Farm
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameInstalledSoftware

metaframeInstalledSoftwareEntry 1.3.6.1.4.1.9600.1.42.1.18.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameInstalledSoftware  

mfInstalledSoftwareIndex 1.3.6.1.4.1.9600.1.42.1.18.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfInstalledSoftwareServer 1.3.6.1.4.1.9600.1.42.1.18.1.2
Return the server name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfInstalledSoftwareSoftware 1.3.6.1.4.1.9600.1.42.1.18.1.3
Return the product name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeProcessTable 1.3.6.1.4.1.9600.1.42.1.19
An OS process running within a Session. Enum gives all process on current serverUse the processID with the CIMv2:Win32_Process class for more OS details
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameProcess

metaframeProcessEntry 1.3.6.1.4.1.9600.1.42.1.19.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameProcess  

mfProcessIndex 1.3.6.1.4.1.9600.1.42.1.19.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfProcessProcessID 1.3.6.1.4.1.9600.1.42.1.19.1.2
Get process ID.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

mfProcessProcessName 1.3.6.1.4.1.9600.1.42.1.19.1.3
Return the process name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfProcessProcessState 1.3.6.1.4.1.9600.1.42.1.19.1.4
Get the state of the process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownState(0), processInitialized(1), processIsReadyToRun(2), processIsRunning(3), processIsStandingBy(4), processTerminated(5), processInTransit(6), waitingOnExecutive(7), waitingOnFreePage(8), waitingToBePagedIn(9), waitingForMemory(10), executionDelayed(11), processSuspended(12), waitingOnUserRequest(13), eventPairHigh(14), eventPairLow(15), lpcReceive(16), lpcReply(17), waitForVirtualMemory(18), processIsPagedOut(19), waitForOtherReasons(20)  

mfProcessServerName 1.3.6.1.4.1.9600.1.42.1.19.1.5
Get server name. This returns the name of the server on which this process is running.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfProcessSessionID 1.3.6.1.4.1.9600.1.42.1.19.1.6
Return the session ID. This returns the ID of the session in which the process is running.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

mfProcessUserName 1.3.6.1.4.1.9600.1.42.1.19.1.7
Get the user name. This is the name of the user who owns the current process. Some system processes may not have a user name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeProcessesInSessionTable 1.3.6.1.4.1.9600.1.42.1.20
No Description
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameProcessesInSession

metaframeProcessesInSessionEntry 1.3.6.1.4.1.9600.1.42.1.20.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameProcessesInSession  

mfProcessesInSessionIndex 1.3.6.1.4.1.9600.1.42.1.20.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfProcessesInSessionAntecedent 1.3.6.1.4.1.9600.1.42.1.20.1.2
Get the session name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfProcessesInSessionDependent 1.3.6.1.4.1.9600.1.42.1.20.1.3
Return the process name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeSchemaVersionTable 1.3.6.1.4.1.9600.1.42.1.21
Schema Version. Used to verify that MOF & Dynamic provider are in step
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameSchemaVersion

metaframeSchemaVersionEntry 1.3.6.1.4.1.9600.1.42.1.21.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameSchemaVersion  

mfSchemaVersionIndex 1.3.6.1.4.1.9600.1.42.1.21.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfSchemaVersionVersion 1.3.6.1.4.1.9600.1.42.1.21.1.2
Get the schema version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeServerTable 1.3.6.1.4.1.9600.1.42.1.22
Where the Citrix Server has MetaFrame installed this class applies. Enumeration just gives information on the local server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameServer

metaframeServerEntry 1.3.6.1.4.1.9600.1.42.1.22.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameServer  

mfServerIndex 1.3.6.1.4.1.9600.1.42.1.22.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfServerDomain 1.3.6.1.4.1.9600.1.42.1.22.1.2
Primary domain of this server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfServerFarmName 1.3.6.1.4.1.9600.1.42.1.22.1.3
Farm in which this server operates
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfServerIPAddress 1.3.6.1.4.1.9600.1.42.1.22.1.4
The principal IP address of the server. Some servers mayhave several network addresses. See CIMv2:Win32_NetworkAdapterConfiguration
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfServerLoginsEnabled 1.3.6.1.4.1.9600.1.42.1.22.1.5
Are logins enabled on this server
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfServerNumberOfActiveSessions 1.3.6.1.4.1.9600.1.42.1.22.1.6
Return the number of active sessions
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfServerNumOfDisconnectSessions 1.3.6.1.4.1.9600.1.42.1.22.1.7
Return the number of disconnected sessions
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfServerNumberOfSessions 1.3.6.1.4.1.9600.1.42.1.22.1.8
Return the total number of sessions
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfServerServerName 1.3.6.1.4.1.9600.1.42.1.22.1.9
Get the name of the server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfServerServerType 1.3.6.1.4.1.9600.1.42.1.22.1.10
Get the type of server object. The only value returned is MetaFrameWinSrvObject. The type of object is used to identify the type of server. Only MetaFrame XP Server for Windows is supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownObject(0), windowsServer(1)  

mfServerZoneName 1.3.6.1.4.1.9600.1.42.1.22.1.11
Zone in which this server operates
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfServerZoneRanking 1.3.6.1.4.1.9600.1.42.1.22.1.12
Servers role in Zone
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownRank(0), zoneDataCollector(1), backupDataCollector(2), serverIsAZoneMember(3), cannotBeDataCollector(4)  

metaframeServerLoadLevelTable 1.3.6.1.4.1.9600.1.42.1.23
Load Manager load value for MetaFrame Servers. Enumeration gives just the load level for the local server
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameServerLoadLevel

metaframeServerLoadLevelEntry 1.3.6.1.4.1.9600.1.42.1.23.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameServerLoadLevel  

mfServerLoadLevelIndex 1.3.6.1.4.1.9600.1.42.1.23.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfServerLoadLevelLoadLevel 1.3.6.1.4.1.9600.1.42.1.23.1.2
Return the load level
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

mfServerLoadLevelServerName 1.3.6.1.4.1.9600.1.42.1.23.1.3
Return the server name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeSessionTable 1.3.6.1.4.1.9600.1.42.1.24
Attributes of a MetaFrame ICA session on a server. Enumeration gives all sessions on the server
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameSession

metaframeSessionEntry 1.3.6.1.4.1.9600.1.42.1.24.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameSession  

mfSessionIndex 1.3.6.1.4.1.9600.1.42.1.24.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfSessionClient 1.3.6.1.4.1.9600.1.42.1.24.1.2
Return the session client name. The session client name is usually the client device name. The client user can change the client device name to a string that is a valid client name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfSessionConnectTime 1.3.6.1.4.1.9600.1.42.1.24.1.3
Return the connect time of the session.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

mfSessionCurrentTime 1.3.6.1.4.1.9600.1.42.1.24.1.4
Return the current time. The returned time is not the exact time at which this call is made. Its value reflects the time when one of the session?s get_XxxTime functions was called
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

mfSessionDisconnectTime 1.3.6.1.4.1.9600.1.42.1.24.1.5
Return the last session disconnect time. If the session is connected, the time is 0 for all the values returned by the IMetaFrameTime interface. If the session is disconnected, it contains the disconnect time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

mfSessionLastInputTime 1.3.6.1.4.1.9600.1.42.1.24.1.6
Get the session?s last input time. To get an updated session last input time, a new session object should be created to read the updated time. The value returned by this property is the time when this property is read the first time. Subsequent calls to this property return the same value.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

mfSessionLogonTime 1.3.6.1.4.1.9600.1.42.1.24.1.7
Return the session logon time. See the description for the MetaFrameTime object for more information about accessing the returned time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

mfSessionNumberOfApps 1.3.6.1.4.1.9600.1.42.1.24.1.8
Return the number of applications
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfSessionServerName 1.3.6.1.4.1.9600.1.42.1.24.1.9
Included as a convenience for session summaries
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfSessionSessionID 1.3.6.1.4.1.9600.1.42.1.24.1.10
Get session ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfSessionSessionName 1.3.6.1.4.1.9600.1.42.1.24.1.11
Get the session name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfSessionSessionState 1.3.6.1.4.1.9600.1.42.1.24.1.12
Return the current state of the session. If the returned session state is MFSessionStateStale, no further attempt to read other session properties should be made. This state indicates that the session may not exist anymore.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER userLoggedOn(0), connectedToClient(1), connectingToClient(2), shadowingOtherSession(3), loggedOnButNoClient(4), waitingForConnection(5), listeningForConnection(6), resetInProgress(7), downDueToError(8), initializing(9)  

mfSessionSessionUser 1.3.6.1.4.1.9600.1.42.1.24.1.13
Return the name of the user who is running the session.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeSoftwareTable 1.3.6.1.4.1.9600.1.42.1.25
Additional attributes of the MetaFrame product
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameSoftware

metaframeSoftwareEntry 1.3.6.1.4.1.9600.1.42.1.25.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameSoftware  

mfSoftwareIndex 1.3.6.1.4.1.9600.1.42.1.25.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfSoftwareFeatureReleaseLevel 1.3.6.1.4.1.9600.1.42.1.25.1.2
Query the MetaFrame XP Feature Release level.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

mfSoftwareInstallDate 1.3.6.1.4.1.9600.1.42.1.25.1.3
Query the MetaFrame XP installation date.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

mfSoftwareMFWinProductCode 1.3.6.1.4.1.9600.1.42.1.25.1.4
Return the server product code. A server must have the proper product code installed for it to accept connections from ICA Clients.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfSoftwareProductName 1.3.6.1.4.1.9600.1.42.1.25.1.5
Return the product name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfSoftwareReleaseLevel 1.3.6.1.4.1.9600.1.42.1.25.1.6
Return the release level
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfSoftwareVersion 1.3.6.1.4.1.9600.1.42.1.25.1.7
Return the product version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

metaframeWinApplicationTable 1.3.6.1.4.1.9600.1.42.1.26
Additional Attributes of a published app on a Windows server
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameWinApplication

metaframeWinApplicationEntry 1.3.6.1.4.1.9600.1.42.1.26.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameWinApplication  

mfWinApplIndex 1.3.6.1.4.1.9600.1.42.1.26.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfWinApplApplicationID 1.3.6.1.4.1.9600.1.42.1.26.1.2
Get the 64 bit application ID. The ID is a 64-bit number that uniquely identifies the application even if the application name changed. You can access the ID data by reading the properties of the IMetaFrameID interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplAppVersion 1.3.6.1.4.1.9600.1.42.1.26.1.3
Return the application version. Read-only. The version of an application is the version number of the IMA application subsystem on which this application was originally published. Currently this value is always 1. When an application is created, an internal version number is assigned to the application. This version number is used to make sure that the application data will be handled properly when a version of the IMA application subsystem needs to read an application data published by a newer version of the IMA application publishing subsystem.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfWinApplBrowserName 1.3.6.1.4.1.9600.1.42.1.26.1.4
Get the application?s browser name. The browser name is another name used by the ICA browser.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplDefaultEncryption 1.3.6.1.4.1.9600.1.42.1.26.1.5
Return the value of the default encryption level to specify the encryption requirements for ICA Clients connecting to the application. This specifies the encryption requirements for ICA Clients connecting to the application.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownEncryption(0), basicEncryptionRC5Logon(1), rc540Bit(2), rc556Bit(3), rc5128Bit(4)  

mfWinApplDefaultInitProg 1.3.6.1.4.1.9600.1.42.1.26.1.6
Return the value of the default initial program (command line). You can include the %* token in the command line to act as a placeholder for clientsupplied application parameters. When a client makes a connection request, the server replaces the %* token in the command line with application parameters provided by the client. This default initial command line is used only when a server doesn?t have its own command line specified.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplDefaultSoundType 1.3.6.1.4.1.9600.1.42.1.26.1.7
Return the value of the default sound type, specifying the sound requirements for ICA Clients connecting to the application. This specifies the sound requirements for ICA Clients connecting to the application. MFWinSoundNone disables audio support for the application. However, ICA Client users can change these settings for their connection. MFWinSoundBasic enables audio support for the application.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownSoundType(0), noSound(1), basicSound(2)  

mfWinApplDefaultWindowColor 1.3.6.1.4.1.9600.1.42.1.26.1.8
Return the value of the default window color to specify how the application appears to the ICA Client user. Window color is the color depth for the application.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownWindowColor(0), a16Colors(1), a256Colors(2), a65536Colors(3), a16MillionColors(4)  

mfWinApplDefaultWindowHeight 1.3.6.1.4.1.9600.1.42.1.26.1.9
Return the value of the default window height to specify how the application appears to the ICA Client user. You must set the default window type to be custom resolution before applying a custom width or height.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfWinApplDefaultWindowScale 1.3.6.1.4.1.9600.1.42.1.26.1.10
Return the value of the default window scale to specify how the application appears to the ICA Client user. You must set the default window type to be a percentage of the client desktop resolution before applying this scale amount. This specifies the size of the application window (scaled as a percentage of the client screen) as it appears to the ICA Client user.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfWinApplDefaultWindowType 1.3.6.1.4.1.9600.1.42.1.26.1.11
Get the default window type. This specifies how the application appears to the ICA Client user. The window type is the default window size for ICA connections. You can specify window type as a standard resolution, custom resolution, percentage of the client desktop, or full screen.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknownWindowType(0), a640x480(1), a800x600(2), a1024x768(3), a1280x1024(4), a1600x1200(5), custom(6), percent(7), fullscreen(8)  

mfWinApplDefaultWindowWidth 1.3.6.1.4.1.9600.1.42.1.26.1.12
Return the value of the default window width to specify how the application appears to the ICA Client user. You must set the default window type to be custom resolution before applying a custom width or height.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfWinApplDefaultWorkDir 1.3.6.1.4.1.9600.1.42.1.26.1.13
Return the value of the default working directory. The default working directory is used if a server doesn?t have its own working directory specified.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplDescription 1.3.6.1.4.1.9600.1.42.1.26.1.14
Return the application?s description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplDesktopIntegrate 1.3.6.1.4.1.9600.1.42.1.26.1.15
Return the value of the desktop integrate flags to specify how ICA Client users can access the application. These flags specify how ICA Client users can access the application. Desktop integrate flags are a combination of the following flags: MFWinAppIntegrateNone: A shortcut to this application is not created for the user?s local Start Menu or desktop. MFWinAppIntegrateStartMenu: A shortcut to this application is created in the user's local Start menu (ICA Win32 Clients only). MFWinAppIntegrateDesktop: A shortcut to this application is created on the user's local desktop (ICA Win32 Clients only).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noDesktopIntegrate(0), startMenu(1), desktop(2)  

mfWinApplDistinguishedName 1.3.6.1.4.1.9600.1.42.1.26.1.16
Return the application?s distinguished name. The application?s distinguished name is the unique identifier of the application in the farm. The maximum length of the distinguished name is 256 characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplEnableApp 1.3.6.1.4.1.9600.1.42.1.26.1.17
Get the value of the 'Enable application' flag. When you publish an application, it is enabled by default. Enabled applications are then available to the users specified when the application was published. Disabled applications are not available to users. The application can become disabled internally if its server list becomes empty, or if its user list becomes empty and the application is not configured to accept anonymous connections. A disabled application is not available to ICA Clients. Another way to enable and disable an application is to set one of the application?s Program Neighborhood attributes. See the references for the IMetaFrameWinApp interface?s get/put_PNAttribute function. An application can also be internally enabled and disabled if its server and/or user list becomes empty or is no longer empty.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinApplFarmName 1.3.6.1.4.1.9600.1.42.1.26.1.18
Get the name of the farm. This property is useful if the server object is created using the GetServer() function of a farm object. It is also useful when servers from different farms are connected to one MFCOM client using DCOM. The farm name can also be obtained from many other objects. If a multi-farm environment is used, this method is useful in identifying a server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplMFAttributes 1.3.6.1.4.1.9600.1.42.1.26.1.19
Return the value of the MetaFrame XP attributes to specify how the application appears to the ICA Client user. Value of the MetaFrame attributes. These values can be: MFWinAppMFAttrNone: No application start up setting is defined. MFWinAppMaximizeOnStartup: The application window is maximized to fill the ICA session window. MFWinAppHideTitleBar: The application?s title bar is not displayed at the top of the ICA session window.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noMetaFrameAttribute(0), maximizeOnStartup(1), hideTitleBar(2)  

mfWinApplName 1.3.6.1.4.1.9600.1.42.1.26.1.20
Return the application name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplParentFolderDN 1.3.6.1.4.1.9600.1.42.1.26.1.21
Return the parent folder?s distinguished name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplPNAttributes 1.3.6.1.4.1.9600.1.42.1.26.1.22
Get the Program Neighborhood attributes. This specifies how Program Neighborhood users access the application. Program Neighborhood attributes are a combination of the following flags: MFWinAppPNAttrNone: The Program Neighborhood attributes settings are off. MFWinAppDisabled: Makes the application unavailable to users. Published applications are enabled by default and are available to the users specified when the application was published. An alternative way to enable or disable the application is to use the IMetaFrameApplication interface?s EnableApp property. MFWinAppMinimumSound: Allows only ICA Clients with required audio support to connect to the application. MFWinAppMinimumEncrypt: Allows only ICA Clients that support the required level of encryption to connect to the application. MFWinAppDesktop: Publishes the server?s entire Windows desktop. The user sees a desktop interface from which any application installed on that server can be launched. MFWinAppAnonymous: Allows all ICA Client users to start the application without specifying a user name, domain name, or password. Users connecting through Program Neighborhood and the Web Interface for MetaFrame XP must first authenticate to the server. After authenticating to the server, they do not need to authenticate again to access the application.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfWinApplPNFolder 1.3.6.1.4.1.9600.1.42.1.26.1.23
Query the client's Program Neighborhood folder.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinApplPublishingFlags 1.3.6.1.4.1.9600.1.42.1.26.1.24
Return the value of the application publishing flags.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noEnumerationMask(0), browserEnumeration(1), pnEnumeration(2)  

mfWinApplReadOnly 1.3.6.1.4.1.9600.1.42.1.26.1.25
Return the value of the application ReadOnly flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

metaframeWinFarmTable 1.3.6.1.4.1.9600.1.42.1.27
Where the MetaFrame farm contains NT servers, these extra attributes apply
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MetaFrameWinFarm

metaframeWinFarmEntry 1.3.6.1.4.1.9600.1.42.1.27.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  MetaFrameWinFarm  

mfWinFarmIndex 1.3.6.1.4.1.9600.1.42.1.27.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

mfWinFarmAlternateCachingMethod 1.3.6.1.4.1.9600.1.42.1.27.1.2
Return the value of the 'Alternate caching method' flag. If the 'Use farm settings for ICA display' flag is set to TRUE, this flag is ignored. The alternate caching method uses the updated caching method supported by MetaFrame 1.8 servers.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmDCRespondToClientBdcst 1.3.6.1.4.1.9600.1.42.1.27.1.3
Return the value of the 'Data collectors respond to ICA client broadcast messages' flag. Data collectors for the farm do not respond to ICA Client broadcast messages. This sets up the data collector for the farm to respond to broadcasts from ICA Clients. By default, this option is unavailable if MetaFrame 1.8 servers are in the farm or other servers in the farm are responding to broadcast messages.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmDegradationBias 1.3.6.1.4.1.9600.1.42.1.27.1.4
Return the value of the ICA display degradation bias.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER degradeResolutionFirst(1), degradeColorDepthFirst(2)  

mfWinFarmDisableClientLocalTmEst 1.3.6.1.4.1.9600.1.42.1.27.1.5
Return the value of the 'Disable client local time estimation' flag. Disable local time estimation is available after 'Per client time zone support' mode is selected. To prevent estimation of local time for ICA Clients other than the ICA Win32 and WinCE Clients, set 'Disable local time estimation' mode in the Management Console.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmDiscardRedundantGraphic 1.3.6.1.4.1.9600.1.42.1.27.1.6
Return the value of the 'discard redundant graphic operations' flag. Set this flag to TRUE to discard intermediate graphic rendering; this improves bandwidth usage. For example, if an area of the display generates an intermediate image that is immediately replaced by another image, the intermediate image is discarded and never displayed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmEnableAutoClientReconn 1.3.6.1.4.1.9600.1.42.1.27.1.7
Query the flag to enable auto client reconnect. If this flag is TRUE, auto client reconnect to this server is enabled. This flag is ignored if the value of UseFarmACRSetting is TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmEnableDNSAddrResolution 1.3.6.1.4.1.9600.1.42.1.27.1.8
Query the enable DNS address resolution flag. If this flag is set to TRUE, the DNS address resolution flag is enabled. If it is FALSE, it is disabled. This flag is a farm default value. Individual servers may overwrite this setting.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmEnableSNMPAgent 1.3.6.1.4.1.9600.1.42.1.27.1.9
Get the value of the 'Enable SNMP agent on all servers' flag. Enabling the SNMP agent subscribes each server to notifications of the selected events, such as Session Logon, Session Logoff, Session Disconnect, and Session Threshold Exceeded. The SNMP service must be running on the servers with this flag set to TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmFarmName 1.3.6.1.4.1.9600.1.42.1.27.1.10
Get the name of the farm. This property is useful if the server object is created using the GetServer() function of a farm object. It is also useful when servers from different farms are connected to one MFCOM client using DCOM. The farm name can also be obtained from many other objects. If a multi-farm environment is used, this method is useful in identifying a server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mfWinFarmICAVideoBufferSize 1.3.6.1.4.1.9600.1.42.1.27.1.11
Get the value of the ICA session video buffer size. If the 'Use farm settings for ICA display' flag is set to TRUE, this flag is ignored. The ICA session video buffer size is the maximum memory allowed for use as a buffer by each client connection. The range is between 150KB and 7500KB, in multiples of 1K (1024 bytes).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfWinFarmLegacyDisplayCompatMode 1.3.6.1.4.1.9600.1.42.1.27.1.12
Get the value of the 'Use legacy ICA display protocol' flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmLegacyServerCompatMode 1.3.6.1.4.1.9600.1.42.1.27.1.13
Return the value of the 'Work with MetaFrame 1.8 servers in the farm' flag. Selecting this mode allows MetaFrame 1.8 servers to belong to the same farm as MetaFrame XP servers.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmLogAutoReconnectAttempt 1.3.6.1.4.1.9600.1.42.1.27.1.14
Query the auto client reconnect attempt logging flag. If this flag is set to TRUE, the logging of auto client reconnect attempt is enabled. If it is FALSE, it is disabled. This flag is a farm default value. Individual servers may overwrite this setting.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmLogOverLimitDenials 1.3.6.1.4.1.9600.1.42.1.27.1.15
Query the logging over the connection limit denial count flag. Set this flag to TRUE or FALSE to turn on or off the logging of over the connection limit denial count. The count indicates how many times a user's logon attempt have been denied once the connection limit for that user has reached.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmMaxConnectionsPerUser 1.3.6.1.4.1.9600.1.42.1.27.1.16
Query the value of maximum connections per user setting. The maximum connections per user setting limits the number of connections a user may make. This setting is a farm default value. Individual users may overwrite this value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfWinFarmNotifyDegradation 1.3.6.1.4.1.9600.1.42.1.27.1.17
Return the value of the 'Notify user of session degradation' flag. If the 'Use farm settings for ICA display' flag is set to TRUE, this flag is ignored. Notifies the user of session degradation. A brief explanation is displayed when a session is degraded. Session degradation can be caused by the session exceeding its memory limit, the use of inappropriate licenses, or an attempt to connect with an ICA Client that is unable to support the requested parameters.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmRASRespondToClientBdcst 1.3.6.1.4.1.9600.1.42.1.27.1.18
Return the value of the 'RAS servers respond to ICA client broadcast message' flag.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmSNMPDisconnectTrap 1.3.6.1.4.1.9600.1.42.1.27.1.19
Return the value of the 'Enable SNMP session disconnect trap' flag. If the 'Use farm?s SNMP settings' flag is set to TRUE, this flag is ignored. The SNMP session logon trap notifies the server each time a user logs on. This is available only if the 'Enable SNMP agent' flag is set to TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmSNMPLogoffTrap 1.3.6.1.4.1.9600.1.42.1.27.1.20
Return the value of the 'Enable SNMP session logoff trap' flag. The SNMP session logoff trap notifies the server each time a user logs off. This mode is available after 'Enable SNMP agent on all servers' mode is selected.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmSNMPLogonTrap 1.3.6.1.4.1.9600.1.42.1.27.1.21
Return the value of the 'Enable SNMP session logon trap' flag. The SNMP session logon trap notifies the server each time a user logs on. This mode is available after 'Enable SNMP agent on all servers' mode is selected.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmSNMPThresholdExceedTrap 1.3.6.1.4.1.9600.1.42.1.27.1.22
Return the value of the 'Enable SNMP session threshold exceeded trap' flag. If the 'Use farm?s SNMP settings' flag is set to TRUE, this flag is ignored. The SNMP session threshold exceeded trap notifies the server each time the number of sessions on a server exceeds the specified number of sessions. This is available only if the 'Enable SNMP agent' flag is set to TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mfWinFarmSNMPThresholdValue 1.3.6.1.4.1.9600.1.42.1.27.1.23
Return an SNMP session threshold value (session limit per server). If the 'Use farm?s SNMP settings' flag is set to TRUE, this flag is ignored. The SNMP session threshold value (session limit per server) is the upper limit of sessions allowed to connect to each server in the farm. This is available only if the 'Enable SNMP agent' and 'Enable SNMP session threshold exceeded trap' flags are set to TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mfWinFarmUseClientLocalTime 1.3.6.1.4.1.9600.1.42.1.27.1.24
Return the value of the 'Use local time of ICA Clients' flag. The flag allows the use of the local time of ICA Clients. All timestamps for all applications are based on the client?s time instead of the server?s time.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

ciitrixWmiCitrixLicensing 1.3.6.1.4.1.9600.1.42.2
Provides WMI information on the Citrix Licensing Services
Status: current Access: read-only
OBJECT-IDENTITY    

citrixGTLicenseTable 1.3.6.1.4.1.9600.1.42.2.1
Licensing base class describing the data associated with a Citrix License Serial Number
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixGTLicense

citrixGTLicenseEntry 1.3.6.1.4.1.9600.1.42.2.1.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixGTLicense  

ctxGTLicenseIndex 1.3.6.1.4.1.9600.1.42.2.1.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxGTLicenseCount 1.3.6.1.4.1.9600.1.42.2.1.1.2
The number of licenses installed
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicenseExpirationDate 1.3.6.1.4.1.9600.1.42.2.1.1.3
Expiration date in the format of dd-mmm-yyyy
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

ctxGTLicenseLicenseType 1.3.6.1.4.1.9600.1.42.2.1.1.4
License type - NFR(Not For Resale), Retail, Eval(Evaluation), and TP(Technology Preview)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicenseOverdraft 1.3.6.1.4.1.9600.1.42.2.1.1.5
The number of Overdraft for a feature/increment line
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicensePLD 1.3.6.1.4.1.9600.1.42.2.1.1.6
Product License Descriptor (The Globetrotter Feature Name). Every PLD consists of the three fields, Product Name, Product Feature and the License Model, e.g., MPS_ENT_CCU
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicensePLDFullName 1.3.6.1.4.1.9600.1.42.2.1.1.7
The full name of the PLD - |
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicenseSerialNumber 1.3.6.1.4.1.9600.1.42.2.1.1.8
No description
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicenseSubscriptionDate 1.3.6.1.4.1.9600.1.42.2.1.1.9
Used as Citrix Subscription Advantage Date in the format of yyyy.mmdd
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

citrixGTLicensePoolTable 1.3.6.1.4.1.9600.1.42.2.2
License Pools
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixGTLicensePool

citrixGTLicensePoolEntry 1.3.6.1.4.1.9600.1.42.2.2.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixGTLicensePool  

ctxGTLicensePoolIndex 1.3.6.1.4.1.9600.1.42.2.2.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxGTLicensePoolCount 1.3.6.1.4.1.9600.1.42.2.2.1.2
Overall number of licenses in license pool
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicensePoolDUPGROUP 1.3.6.1.4.1.9600.1.42.2.2.1.3
FLEXlm duplicate grouping
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicensePoolFLOATOK 1.3.6.1.4.1.9600.1.42.2.2.1.4
FLEXlm mobile licensing
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

ctxGTLicensePoolHOSTBASED 1.3.6.1.4.1.9600.1.42.2.2.1.5
FLEXlm host based license
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicensePoolHOSTID 1.3.6.1.4.1.9600.1.42.2.2.1.6
License server host ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicensePoolInUseCount 1.3.6.1.4.1.9600.1.42.2.2.1.7
The number of licenses pooled in use
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicensePoolLicenseType 1.3.6.1.4.1.9600.1.42.2.2.1.8
License type - NFR(Not For Resale), Retail, Eval(Evaluation), and TP(Technology Preview)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicensePoolOverdraft 1.3.6.1.4.1.9600.1.42.2.2.1.9
The number of Overdraft for a a license pool
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicensePoolPLATFORMS 1.3.6.1.4.1.9600.1.42.2.2.1.10
Platforms a license is restricted to be used on
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicensePoolPLD 1.3.6.1.4.1.9600.1.42.2.2.1.11
Product License Descriptor (The Globetrotter Feature Name). Every PLD consists of the three fields, Product Name, Product Feature and the License Model, e.g., MPS_ENT_CCU
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicensePoolPLDFullName 1.3.6.1.4.1.9600.1.42.2.2.1.12
The full name of the PLD - |
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxGTLicensePoolPooledAvailable 1.3.6.1.4.1.9600.1.42.2.2.1.13
The number of licenses pooled available
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicensePoolSubscriptionDate 1.3.6.1.4.1.9600.1.42.2.2.1.14
Used as Citrix Subscription Advantage Date in the format of yyyy.mmdd
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

ctxGTLicensePoolUSERBASED 1.3.6.1.4.1.9600.1.42.2.2.1.15
FLEXlm user based license
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ctxGTLicensePoolVendorString 1.3.6.1.4.1.9600.1.42.2.2.1.16
Vendor string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixGTLicensesInLicensePlTable 1.3.6.1.4.1.9600.1.42.2.3
The set of licenses that make up a license pool
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixGTLicensesInLicensePool

citrixGTLicensesInLicensePlEntry 1.3.6.1.4.1.9600.1.42.2.3.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixGTLicensesInLicensePool  

ctxgtllpIndex 1.3.6.1.4.1.9600.1.42.2.3.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxgtllpLicense 1.3.6.1.4.1.9600.1.42.2.3.1.2
Return the license number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ctxgtllpPool 1.3.6.1.4.1.9600.1.42.2.3.1.3
Return the vendor string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

citrixLicenseSchemaVersionTable 1.3.6.1.4.1.9600.1.42.2.4
Schema Version. Used to verify that MOF & Dynamic provider are in step
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CitrixLicensingSchemaVersion

citrixLicenseSchemaVersionEntry 1.3.6.1.4.1.9600.1.42.2.4.1
None
Status: current Access: not-accessible
OBJECT-TYPE    
  CitrixLicensingSchemaVersion  

ctxLicensingSchemaVersionIndex 1.3.6.1.4.1.9600.1.42.2.4.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ctxLicensingSchemaVersionVersion 1.3.6.1.4.1.9600.1.42.2.4.1.2
Return the license schema version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor