IFCP-MGMT-MIB

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
RMON2-MIB	HCNUM-TC	IF-MIB
SNMP-FRAMEWORK-MIB	INET-ADDRESS-MIB	FC-MGMT-MIB
ENTITY-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Gauge32
Integer32	Unsigned32	transmission
OBJECT-GROUP	MODULE-COMPLIANCE	TEXTUAL-CONVENTION
TimeStamp	TruthValue	StorageType
ZeroBasedCounter32	ZeroBasedCounter64	InterfaceIndexOrZero
SnmpAdminString	InetAddressType	InetAddress
InetPortNumber	FcNameIdOrZero	FcAddressIdOrZero
PhysicalIndexOrZero

Defined Types

IfcpIpTOVorZero
The maximum propagation delay, in seconds, for an encapsulated FC frame to traverse the IP network. A value of 0 implies fibre channel frame lifetime limits will not be enforced.
TEXTUAL-CONVENTION
	Unsigned32	0..3600

IfcpLTIorZero
The value for the Liveness Test Interval (LTI) being used in an iFCP connection, in seconds. A value of 0 implies no Liveness Test Interval will be used.
TEXTUAL-CONVENTION
	Unsigned32	0..65535

IfcpSessionStates
The value for an iFCP session state.
TEXTUAL-CONVENTION
	INTEGER	down(1), openPending(2), open(3)

IfcpAddressMode
The values for iFCP Address Translation Mode.
TEXTUAL-CONVENTION
	INTEGER	addressTransparent(1), addressTranslation(2)

IfcpLclGtwyInstEntry
SEQUENCE
	ifcpLclGtwyInstIndex	Unsigned32
	ifcpLclGtwyInstPhyIndex	PhysicalIndexOrZero
	ifcpLclGtwyInstVersionMin	Unsigned32
	ifcpLclGtwyInstVersionMax	Unsigned32
	ifcpLclGtwyInstAddrTransMode	IfcpAddressMode
	ifcpLclGtwyInstFcBrdcstSupport	TruthValue
	ifcpLclGtwyInstDefaultIpTOV	IfcpIpTOVorZero
	ifcpLclGtwyInstDefaultLTInterval	IfcpLTIorZero
	ifcpLclGtwyInstDescr	SnmpAdminString
	ifcpLclGtwyInstNumActiveSessions	Gauge32
	ifcpLclGtwyInstStorageType	StorageType

IfcpSessionAttributesEntry
SEQUENCE
	ifcpSessionIndex	Integer32
	ifcpSessionLclPrtlIfIndex	InterfaceIndexOrZero
	ifcpSessionLclPrtlAddrType	InetAddressType
	ifcpSessionLclPrtlAddr	InetAddress
	ifcpSessionLclPrtlTcpPort	InetPortNumber
	ifcpSessionLclNpWwun	FcNameIdOrZero
	ifcpSessionLclNpFcid	FcAddressIdOrZero
	ifcpSessionRmtNpWwun	FcNameIdOrZero
	ifcpSessionRmtPrtlIfAddrType	InetAddressType
	ifcpSessionRmtPrtlIfAddr	InetAddress
	ifcpSessionRmtPrtlTcpPort	InetPortNumber
	ifcpSessionRmtNpFcid	FcAddressIdOrZero
	ifcpSessionRmtNpFcidAlias	FcAddressIdOrZero
	ifcpSessionIpTOV	IfcpIpTOVorZero
	ifcpSessionLclLTIntvl	IfcpLTIorZero
	ifcpSessionRmtLTIntvl	IfcpLTIorZero
	ifcpSessionBound	TruthValue
	ifcpSessionStorageType	StorageType

IfcpSessionStatsEntry
SEQUENCE
	ifcpSessionState	IfcpSessionStates
	ifcpSessionDuration	Unsigned32
	ifcpSessionTxOctets	ZeroBasedCounter64
	ifcpSessionRxOctets	ZeroBasedCounter64
	ifcpSessionTxFrames	ZeroBasedCounter64
	ifcpSessionRxFrames	ZeroBasedCounter64
	ifcpSessionStaleFrames	ZeroBasedCounter64
	ifcpSessionHeaderCRCErrors	ZeroBasedCounter64
	ifcpSessionFcPayloadCRCErrors	ZeroBasedCounter64
	ifcpSessionOtherErrors	ZeroBasedCounter64
	ifcpSessionDiscontinuityTime	TimeStamp

IfcpSessionLcStatsEntry
SEQUENCE
	ifcpSessionLcTxOctets	ZeroBasedCounter32
	ifcpSessionLcRxOctets	ZeroBasedCounter32
	ifcpSessionLcTxFrames	ZeroBasedCounter32
	ifcpSessionLcRxFrames	ZeroBasedCounter32
	ifcpSessionLcStaleFrames	ZeroBasedCounter32
	ifcpSessionLcHeaderCRCErrors	ZeroBasedCounter32
	ifcpSessionLcFcPayloadCRCErrors	ZeroBasedCounter32
	ifcpSessionLcOtherErrors	ZeroBasedCounter32

Defined Values

ifcpMgmtMIB		1.3.6.1.2.1.10.230
This module defines management information specific to Internet Fibre Channel Protocol (iFCP) gateway management. Copyright (c) 2011 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
MODULE-IDENTITY

ifcpGatewayObjects		1.3.6.1.2.1.10.230.1
OBJECT IDENTIFIER

ifcpGatewayConformance		1.3.6.1.2.1.10.230.2
OBJECT IDENTIFIER

ifcpLclGatewayInfo		1.3.6.1.2.1.10.230.1.1
OBJECT IDENTIFIER

ifcpLclGtwyInstTable		1.3.6.1.2.1.10.230.1.1.1
Information about all local iFCP gateway instances that can be monitored and controlled. This table contains an entry for each local iFCP gateway instance that is being managed.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IfcpLclGtwyInstEntry

ifcpLclGtwyInstEntry		1.3.6.1.2.1.10.230.1.1.1.1
An entry in the local iFCP gateway instance table. Parameters and settings for the gateway are found here.
Status: current	Access: not-accessible
OBJECT-TYPE
	IfcpLclGtwyInstEntry

ifcpLclGtwyInstIndex		1.3.6.1.2.1.10.230.1.1.1.1.1
An arbitrary integer value to uniquely identify this iFCP gateway from other local gateway instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..2147483647

ifcpLclGtwyInstPhyIndex		1.3.6.1.2.1.10.230.1.1.1.1.2
An index indicating the location of this local gateway within a larger entity, if one exists. If supported, this is the entPhysicalIndex from the Entity MIB (Version 3), for this iFCP gateway. If not supported, or if not related to a physical entity, then the value of this object is 0.
Status: current	Access: read-only
OBJECT-TYPE
	PhysicalIndexOrZero

ifcpLclGtwyInstVersionMin		1.3.6.1.2.1.10.230.1.1.1.1.3
The minimum iFCP protocol version supported by the local iFCP gateway instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

ifcpLclGtwyInstVersionMax		1.3.6.1.2.1.10.230.1.1.1.1.4
The maximum iFCP protocol version supported by the local iFCP gateway instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

ifcpLclGtwyInstAddrTransMode		1.3.6.1.2.1.10.230.1.1.1.1.5
The local iFCP gateway operating mode. Changing this value may cause existing sessions to be disrupted.
Status: current	Access: read-write
OBJECT-TYPE
	IfcpAddressMode

ifcpLclGtwyInstFcBrdcstSupport		1.3.6.1.2.1.10.230.1.1.1.1.6
This value indicates whether the local iFCP gateway supports FC Broadcast. Changing this value may cause existing sessions to be disrupted.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ifcpLclGtwyInstDefaultIpTOV		1.3.6.1.2.1.10.230.1.1.1.1.7
The default IP_TOV used for iFCP sessions at this gateway. This is the default maximum propagation delay that will be used for an iFCP session. The value can be changed on a per-session basis. The valid range is 0 - 3600 seconds. A value of 0 implies that fibre channel frame lifetime limits will not be enforced.
Status: current	Access: read-write
OBJECT-TYPE
	IfcpIpTOVorZero

ifcpLclGtwyInstDefaultLTInterval		1.3.6.1.2.1.10.230.1.1.1.1.8
The default Liveness Test Interval (LTI), in seconds, used for iFCP sessions at this gateway. This is the default value for an iFCP session and can be changed on a per-session basis. The valid range is 0 - 65535 seconds. A value of 0 implies no Liveness Test Interval will be performed on a session.
Status: current	Access: read-write
OBJECT-TYPE
	IfcpLTIorZero

ifcpLclGtwyInstDescr		1.3.6.1.2.1.10.230.1.1.1.1.9
A user-entered description for this iFCP gateway.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString	Size(0..64)

ifcpLclGtwyInstNumActiveSessions		1.3.6.1.2.1.10.230.1.1.1.1.10
The current total number of iFCP sessions in the open or open-pending state.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32	0..4294967295

ifcpLclGtwyInstStorageType		1.3.6.1.2.1.10.230.1.1.1.1.11
The storage type for this row. Parameter values defined for a gateway are usually non-volatile, but may be volatile or permanent in some configurations. If permanent, then the following parameters must have read-write access: ifcpLclGtwyInstAddrTransMode, ifcpLclGtwyInstDefaultIpTOV, and ifcpLclGtwyInstDefaultLTInterval.
Status: current	Access: read-only
OBJECT-TYPE
	StorageType

ifcpNportSessionInfo		1.3.6.1.2.1.10.230.1.2
OBJECT IDENTIFIER

ifcpSessionAttributesTable		1.3.6.1.2.1.10.230.1.2.1
An iFCP session consists of the pair of N_PORTs comprising the session endpoints joined by a single TCP/IP connection. This table provides information on each iFCP session currently using a local iFCP gateway instance. iFCP sessions are created and removed by the iFCP gateway instances, which are reflected in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IfcpSessionAttributesEntry

ifcpSessionAttributesEntry		1.3.6.1.2.1.10.230.1.2.1.1
Each entry contains information about one iFCP session consisting of a pair of N_PORTs joined by a single TCP/IP connection. This table's INDEX includes ifcpLclGtwyInstIndex, which identifies the local iFCP gateway instance that created the session for the entry. Soon after an entry is created in this table for an iFCP session, it will correspond to an entry in the tcpConnectionTable of the TCP-MIB (RFC 4022). The corresponding entry might represent a preexisting TCP connection, or it might be a newly created entry. (Note that if IPv4 is being used, an entry in RFC 2012's tcpConnTable may also correspond.) The values of ifcpSessionLclPrtlAddrType and ifcpSessionRmtPrtlIfAddrType in this table and the values of tcpConnectionLocalAddressType and tcpConnectionRemAddressType used as INDEX values for the corresponding entry in the tcpConnectionTable should be the same; this makes it simpler to locate a session's TCP connection in the TCP-MIB. (Of course, all four values need to be 'ipv4' if there's a corresponding entry in the tcpConnTable.) If an entry is created in this table for a session, prior to knowing which local and/or remote port numbers will be used for the TCP connection, then ifcpSessionLclPrtlTcpPort and/or ifcpSessionRmtPrtlTcpPort have the value zero until such time as they can be updated to the port numbers (to be) used for the connection. (Thus, a port value of zero should not be used to locate a session's TCP connection in the TCP-MIB.) When the TCP connection terminates, the entry in the tcpConnectionTable and the entry in this table both get deleted (and, if applicable, so does the entry in the tcpConnTable).
Status: current	Access: not-accessible
OBJECT-TYPE
	IfcpSessionAttributesEntry

ifcpSessionIndex		1.3.6.1.2.1.10.230.1.2.1.1.1
The iFCP session index is a unique value used as an index to the table, along with a specific local iFCP gateway instance. This index is used because the local N Port and remote N Port information would create a complex index that would be difficult to implement.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

ifcpSessionLclPrtlIfIndex		1.3.6.1.2.1.10.230.1.2.1.1.2
This is the interface index in the IF-MIB ifTable being used as the local portal in this session, as described in the IF-MIB. If the local portal is not associated with an entry in the ifTable, then the value is 0. The ifType of the interface will generally be a type that supports IP, but an implementation may support iFCP using other protocols. This object can be used to obtain additional information about the interface.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

ifcpSessionLclPrtlAddrType		1.3.6.1.2.1.10.230.1.2.1.1.3
The type of address in ifcpSessionLclIfAddr.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

ifcpSessionLclPrtlAddr		1.3.6.1.2.1.10.230.1.2.1.1.4
This is the external IP address of the interface being used for the iFCP local portal in this session. The address type is defined in ifcpSessionLclPrtlAddrType. If the value is a DNS name, then the name is resolved once, during the initial session instantiation.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

ifcpSessionLclPrtlTcpPort		1.3.6.1.2.1.10.230.1.2.1.1.5
This is the TCP port number that is being used for the iFCP local portal in this session. This is normally an ephemeral port number selected by the gateway. The value may be 0 during an initial setup period.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

ifcpSessionLclNpWwun		1.3.6.1.2.1.10.230.1.2.1.1.6
World Wide Unique Name of the local N Port. For an unbound session, this variable will be a zero-length string.
Status: current	Access: read-only
OBJECT-TYPE
	FcNameIdOrZero

ifcpSessionLclNpFcid		1.3.6.1.2.1.10.230.1.2.1.1.7
Fibre Channel Identifier of the local N Port. For an unbound session, this variable will be a zero-length string.
Status: current	Access: read-only
OBJECT-TYPE
	FcAddressIdOrZero

ifcpSessionRmtNpWwun		1.3.6.1.2.1.10.230.1.2.1.1.8
World Wide Unique Name of the remote N Port. For an unbound session, this variable will be a zero-length string.
Status: current	Access: read-only
OBJECT-TYPE
	FcNameIdOrZero

ifcpSessionRmtPrtlIfAddrType		1.3.6.1.2.1.10.230.1.2.1.1.9
The type of address in ifcpSessionRmtPrtlIfAddr.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

ifcpSessionRmtPrtlIfAddr		1.3.6.1.2.1.10.230.1.2.1.1.10
This is the remote gateway IP address being used for the portal on the remote iFCP gateway. The address type is defined in ifcpSessionRmtPrtlIfAddrType. If the value is a DNS name, then the name is resolved once, during the initial session instantiation.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

ifcpSessionRmtPrtlTcpPort		1.3.6.1.2.1.10.230.1.2.1.1.11
This is the TCP port number being used for the portal on the remote iFCP gateway. Generally, this will be the iFCP canonical port. The value may be 0 during an initial setup period.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

ifcpSessionRmtNpFcid		1.3.6.1.2.1.10.230.1.2.1.1.12
Fibre Channel Identifier of the remote N Port. For an unbound session, this variable will be a zero-length string.
Status: current	Access: read-only
OBJECT-TYPE
	FcAddressIdOrZero

ifcpSessionRmtNpFcidAlias		1.3.6.1.2.1.10.230.1.2.1.1.13
Fibre Channel Identifier Alias assigned by the local gateway for the remote N Port. For an unbound session, this variable will be a zero-length string.
Status: current	Access: read-only
OBJECT-TYPE
	FcAddressIdOrZero

ifcpSessionIpTOV		1.3.6.1.2.1.10.230.1.2.1.1.14
The IP_TOV being used for this iFCP session. This is the maximum propagation delay that will be used for the iFCP session. The value can be changed on a per-session basis and initially defaults to ifcpLclGtwyInstDefaultIpTOV for the local gateway instance. The valid range is 0 - 3600 seconds. A value of 0 implies fibre channel frame lifetime limits will not be enforced.
Status: current	Access: read-write
OBJECT-TYPE
	IfcpIpTOVorZero

ifcpSessionLclLTIntvl		1.3.6.1.2.1.10.230.1.2.1.1.15
The Liveness Test Interval (LTI) used for this iFCP session. The value can be changed on a per-session basis and initially defaults to ifcpLclGtwyInstDefaultLTInterval for the local gateway instance. The valid range is 0 - 65535 seconds. A value of 0 implies that the gateway will not originate Liveness Test messages for the session.
Status: current	Access: read-only
OBJECT-TYPE
	IfcpLTIorZero

ifcpSessionRmtLTIntvl		1.3.6.1.2.1.10.230.1.2.1.1.16
The Liveness Test Interval (LTI) as requested by the remote gateway instance to use for this iFCP session. This value may change over the life of the session. The valid range is 0 - 65535 seconds. A value of 0 implies that the remote gateway has not been requested to originate Liveness Test messages for the session.
Status: current	Access: read-only
OBJECT-TYPE
	IfcpLTIorZero

ifcpSessionBound		1.3.6.1.2.1.10.230.1.2.1.1.17
This value indicates whether this session is bound to a specific local and remote N Port. Sessions by default are unbound and ready for future assignment to a local and remote N Port.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

ifcpSessionStorageType		1.3.6.1.2.1.10.230.1.2.1.1.18
The storage type for this row. Parameter values defined for a session are usually non-volatile, but may be volatile or permanent in some configurations. If permanent, then ifcpSessionIpTOV must have read-write access.
Status: current	Access: read-only
OBJECT-TYPE
	StorageType

ifcpSessionStatsTable		1.3.6.1.2.1.10.230.1.2.2
This table provides statistics on an iFCP session.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IfcpSessionStatsEntry

ifcpSessionStatsEntry		1.3.6.1.2.1.10.230.1.2.2.1
Provides iFCP-specific statistics per session.
Status: current	Access: not-accessible
OBJECT-TYPE
	IfcpSessionStatsEntry

ifcpSessionState		1.3.6.1.2.1.10.230.1.2.2.1.1
The current session operating state.
Status: current	Access: read-only
OBJECT-TYPE
	IfcpSessionStates

ifcpSessionDuration		1.3.6.1.2.1.10.230.1.2.2.1.2
This indicates, in seconds, how long the iFCP session has been in an open or open-pending state. When a session is down, the value is reset to 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

ifcpSessionTxOctets		1.3.6.1.2.1.10.230.1.2.2.1.3
The total number of octets transmitted by the iFCP gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter64

ifcpSessionRxOctets		1.3.6.1.2.1.10.230.1.2.2.1.4
The total number of octets received by the iFCP gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter64

ifcpSessionTxFrames		1.3.6.1.2.1.10.230.1.2.2.1.5
The total number of iFCP frames transmitted by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter64

ifcpSessionRxFrames		1.3.6.1.2.1.10.230.1.2.2.1.6
The total number of iFCP frames received by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter64

ifcpSessionStaleFrames		1.3.6.1.2.1.10.230.1.2.2.1.7
The total number of received iFCP frames that were stale and discarded by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter64

ifcpSessionHeaderCRCErrors		1.3.6.1.2.1.10.230.1.2.2.1.8
The total number of Cyclic Redundancy Check (CRC) errors that occurred in the frame header, detected by the gateway for this session. Usually, a single Header CRC error is sufficient to terminate an iFCP session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter64

ifcpSessionFcPayloadCRCErrors		1.3.6.1.2.1.10.230.1.2.2.1.9
The total number of CRC errors that occurred in the Fibre Channel frame payload, detected by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter64

ifcpSessionOtherErrors		1.3.6.1.2.1.10.230.1.2.2.1.10
The total number of errors, other than errors explicitly measured, detected by the gateway for this session. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of ifcpSessionDiscontinuityTime.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter64

ifcpSessionDiscontinuityTime		1.3.6.1.2.1.10.230.1.2.2.1.11
The value of sysUpTime on the most recent occasion at which any one (or more) of the ifcpSessionStatsTable counters suffered a discontinuity. The relevant counters are the specific Counter64-based instances associated with the ifcpSessionStatsTable: ifcpSessionTxOctets, ifcpSessionRxOctets, ifcpSessionTxFrames, ifcpSessionRxFrames, ifcpSessionStaleFrames, ifcpSessionHeaderCRCErrors, ifcpSessionFcPayloadCRCErrors, and ifcpSessionOtherErrors. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

ifcpSessionLcStatsTable		1.3.6.1.2.1.10.230.1.2.3
This table provides low-capacity statistics for an iFCP session. These are provided for backward compatibility with systems that do not support Counter64-based objects. At 1-Gbps rates, a Counter32-based object can wrap as often as every 34 seconds. Counter32-based objects can be sufficient for many situations. However, when possible, it is recommended to use the high-capacity statistics in ifcpSessionStatsTable based on Counter64 objects.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IfcpSessionLcStatsEntry

ifcpSessionLcStatsEntry		1.3.6.1.2.1.10.230.1.2.3.1
Provides iFCP-specific statistics per session.
Status: current	Access: not-accessible
OBJECT-TYPE
	IfcpSessionLcStatsEntry

ifcpSessionLcTxOctets		1.3.6.1.2.1.10.230.1.2.3.1.1
The total number of octets transmitted by the iFCP gateway for this session.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter32

ifcpSessionLcRxOctets		1.3.6.1.2.1.10.230.1.2.3.1.2
The total number of octets received by the iFCP gateway for this session.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter32

ifcpSessionLcTxFrames		1.3.6.1.2.1.10.230.1.2.3.1.3
The total number of iFCP frames transmitted by the gateway for this session.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter32

ifcpSessionLcRxFrames		1.3.6.1.2.1.10.230.1.2.3.1.4
The total number of iFCP frames received by the gateway for this session.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter32

ifcpSessionLcStaleFrames		1.3.6.1.2.1.10.230.1.2.3.1.5
The total number of received iFCP frames that were stale and discarded by the gateway for this session.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter32

ifcpSessionLcHeaderCRCErrors		1.3.6.1.2.1.10.230.1.2.3.1.6
The total number of CRC errors that occurred in the frame header, detected by the gateway for this session. Usually, a single Header CRC error is sufficient to terminate an iFCP session.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter32

ifcpSessionLcFcPayloadCRCErrors		1.3.6.1.2.1.10.230.1.2.3.1.7
The total number of CRC errors that occurred in the Fibre Channel frame payload, detected by the gateway for this session.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter32

ifcpSessionLcOtherErrors		1.3.6.1.2.1.10.230.1.2.3.1.8
The total number of errors, other than errors explicitly measured, detected by the gateway for this session.
Status: current	Access: read-only
OBJECT-TYPE
	ZeroBasedCounter32

ifcpCompliances		1.3.6.1.2.1.10.230.2.1
OBJECT IDENTIFIER

ifcpGatewayCompliance		1.3.6.1.2.1.10.230.2.1.1
This MODULE-COMPLIANCE has been deprecated because address translation mode has been deprecated in the iFCP standard. It has the implementation requirements for iFCP MIB module compliance.
Status: deprecated	Access: read-only
MODULE-COMPLIANCE

ifcpGatewayComplianceNoTranslation		1.3.6.1.2.1.10.230.2.1.2
Implementation requirements for iFCP MIB module compliance. Address translation mode has been deprecated in the iFCP standard.
Status: current	Access: read-only
MODULE-COMPLIANCE

ifcpGroups		1.3.6.1.2.1.10.230.2.2
OBJECT IDENTIFIER

ifcpLclGatewayGroup		1.3.6.1.2.1.10.230.2.2.1
iFCP local device info group. This group provides information about each gateway.
Status: current	Access: read-only
OBJECT-GROUP

ifcpLclGatewaySessionGroup		1.3.6.1.2.1.10.230.2.2.4
This OBJECT-GROUP has been deprecated because address translation mode has been deprecated in the iFCP standard. iFCP Session group. This group provides information about each iFCP session currently active between iFCP gateways.
Status: deprecated	Access: read-only
OBJECT-GROUP

ifcpLclGatewaySessionStatsGroup		1.3.6.1.2.1.10.230.2.2.5
iFCP Session Statistics group. This group provides statistics with 64-bit counters for each iFCP session currently active between iFCP gateways. This group is only required for agents that can support Counter64- based data types.
Status: current	Access: read-only
OBJECT-GROUP

ifcpLclGatewaySessionLcStatsGroup		1.3.6.1.2.1.10.230.2.2.6
iFCP Session Low-Capacity Statistics group. This group provides statistics with low-capacity 32-bit counters for each iFCP session currently active between iFCP gateways. This group is only required for agents that do not support Counter64-based data types, or that need to support SNMPv1 applications.
Status: current	Access: read-only
OBJECT-GROUP

ifcpLclGatewaySessionGroupNoTranslation		1.3.6.1.2.1.10.230.2.2.7
iFCP Session group. This group provides information about each iFCP session currently active between iFCP gateways.
Status: current	Access: read-only
OBJECT-GROUP