IEEE8021-Q-BRIDGE-MIB

File: IEEE8021-Q-BRIDGE-MIB.mib (98539 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
SNMPv2-CONF IEEE8021-BRIDGE-MIB IEEE8021-TC-MIB
Q-BRIDGE-MIB RMON2-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Gauge32
Counter64 Unsigned32 TimeTicks
Integer32 RowStatus StorageType
TruthValue MacAddress SnmpAdminString
MODULE-COMPLIANCE OBJECT-GROUP ieee8021BridgeBasePortComponentId
ieee8021BridgeBasePort ieee8021BridgeBasePortEntry ieee802dot1mibs
IEEE8021PbbComponentIdentifier IEEE8021BridgePortNumber IEEE8021BridgePortNumberOrZero
IEEE8021VlanIndex IEEE8021VlanIndexOrWildcard IEEE8021PortAcceptableFrameTypes
PortList VlanId TimeFilter

Defined Types

Ieee8021QBridgeEntry  
SEQUENCE    
  ieee8021QBridgeComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeVlanVersionNumber INTEGER
  ieee8021QBridgeMaxVlanId VlanId
  ieee8021QBridgeMaxSupportedVlans Unsigned32
  ieee8021QBridgeNumVlans Gauge32
  ieee8021QBridgeMvrpEnabledStatus TruthValue

Ieee8021QBridgeCVlanPortEntry  
SEQUENCE    
  ieee8021QBridgeCVlanPortComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeCVlanPortNumber IEEE8021BridgePortNumber
  ieee8021QBridgeCVlanPortRowStatus RowStatus

Ieee8021QBridgeFdbEntry  
SEQUENCE    
  ieee8021QBridgeFdbComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeFdbId Unsigned32
  ieee8021QBridgeFdbDynamicCount Gauge32
  ieee8021QBridgeFdbLearnedEntryDiscards Counter64
  ieee8021QBridgeFdbAgingTime Integer32

Ieee8021QBridgeTpFdbEntry  
SEQUENCE    
  ieee8021QBridgeTpFdbAddress MacAddress
  ieee8021QBridgeTpFdbPort IEEE8021BridgePortNumberOrZero
  ieee8021QBridgeTpFdbStatus INTEGER

Ieee8021QBridgeTpGroupEntry  
SEQUENCE    
  ieee8021QBridgeTpGroupAddress MacAddress
  ieee8021QBridgeTpGroupEgressPorts PortList
  ieee8021QBridgeTpGroupLearnt PortList

Ieee8021QBridgeForwardAllEntry  
SEQUENCE    
  ieee8021QBridgeForwardAllVlanIndex IEEE8021VlanIndexOrWildcard
  ieee8021QBridgeForwardAllPorts PortList
  ieee8021QBridgeForwardAllStaticPorts PortList
  ieee8021QBridgeForwardAllForbiddenPorts PortList

Ieee8021QBridgeForwardUnregisteredEntry  
SEQUENCE    
  ieee8021QBridgeForwardUnregisteredVlanIndex IEEE8021VlanIndexOrWildcard
  ieee8021QBridgeForwardUnregisteredPorts PortList
  ieee8021QBridgeForwardUnregisteredStaticPorts PortList
  ieee8021QBridgeForwardUnregisteredForbiddenPorts PortList

Ieee8021QBridgeStaticUnicastEntry  
SEQUENCE    
  ieee8021QBridgeStaticUnicastComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeStaticUnicastVlanIndex IEEE8021VlanIndexOrWildcard
  ieee8021QBridgeStaticUnicastAddress MacAddress
  ieee8021QBridgeStaticUnicastReceivePort IEEE8021BridgePortNumberOrZero
  ieee8021QBridgeStaticUnicastStaticEgressPorts PortList
  ieee8021QBridgeStaticUnicastForbiddenEgressPorts PortList
  ieee8021QBridgeStaticUnicastStorageType StorageType
  ieee8021QBridgeStaticUnicastRowStatus RowStatus

Ieee8021QBridgeStaticMulticastEntry  
SEQUENCE    
  ieee8021QBridgeStaticMulticastAddress MacAddress
  ieee8021QBridgeStaticMulticastReceivePort IEEE8021BridgePortNumberOrZero
  ieee8021QBridgeStaticMulticastStaticEgressPorts PortList
  ieee8021QBridgeStaticMulticastForbiddenEgressPorts PortList
  ieee8021QBridgeStaticMulticastStorageType StorageType
  ieee8021QBridgeStaticMulticastRowStatus RowStatus

Ieee8021QBridgeVlanCurrentEntry  
SEQUENCE    
  ieee8021QBridgeVlanTimeMark TimeFilter
  ieee8021QBridgeVlanCurrentComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeVlanIndex IEEE8021VlanIndex
  ieee8021QBridgeVlanFdbId Unsigned32
  ieee8021QBridgeVlanCurrentEgressPorts PortList
  ieee8021QBridgeVlanCurrentUntaggedPorts PortList
  ieee8021QBridgeVlanStatus INTEGER
  ieee8021QBridgeVlanCreationTime TimeTicks

Ieee8021QBridgeVlanStaticEntry  
SEQUENCE    
  ieee8021QBridgeVlanStaticComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeVlanStaticVlanIndex IEEE8021VlanIndex
  ieee8021QBridgeVlanStaticName SnmpAdminString
  ieee8021QBridgeVlanStaticEgressPorts PortList
  ieee8021QBridgeVlanForbiddenEgressPorts PortList
  ieee8021QBridgeVlanStaticUntaggedPorts PortList
  ieee8021QBridgeVlanStaticRowStatus RowStatus

Ieee8021QBridgeNextFreeLocalVlanEntry  
SEQUENCE    
  ieee8021QBridgeNextFreeLocalVlanComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeNextFreeLocalVlanIndex Unsigned32

Ieee8021QBridgePortVlanEntry  
SEQUENCE    
  ieee8021QBridgePvid IEEE8021VlanIndex
  ieee8021QBridgePortAcceptableFrameTypes IEEE8021PortAcceptableFrameTypes
  ieee8021QBridgePortIngressFiltering TruthValue
  ieee8021QBridgePortMvrpEnabledStatus TruthValue
  ieee8021QBridgePortMvrpFailedRegistrations Counter64
  ieee8021QBridgePortMvrpLastPduOrigin MacAddress
  ieee8021QBridgePortRestrictedVlanRegistration TruthValue

Ieee8021QBridgePortVlanStatisticsEntry  
SEQUENCE    
  ieee8021QBridgeTpVlanPortInFrames Counter64
  ieee8021QBridgeTpVlanPortOutFrames Counter64
  ieee8021QBridgeTpVlanPortInDiscards Counter64

Ieee8021QBridgeLearningConstraintsEntry  
SEQUENCE    
  ieee8021QBridgeLearningConstraintsComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeLearningConstraintsVlan IEEE8021VlanIndex
  ieee8021QBridgeLearningConstraintsSet Integer32
  ieee8021QBridgeLearningConstraintsType INTEGER
  ieee8021QBridgeLearningConstraintsStatus RowStatus

Ieee8021QBridgeLearningConstraintDefaultsEntry  
SEQUENCE    
  ieee8021QBridgeLearningConstraintDefaultsComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeLearningConstraintDefaultsSet Integer32
  ieee8021QBridgeLearningConstraintDefaultsType INTEGER

Ieee8021QBridgeProtocolGroupEntry  
SEQUENCE    
  ieee8021QBridgeProtocolGroupComponentId IEEE8021PbbComponentIdentifier
  ieee8021QBridgeProtocolTemplateFrameType INTEGER
  ieee8021QBridgeProtocolTemplateProtocolValue OCTET STRING
  ieee8021QBridgeProtocolGroupId Integer32
  ieee8021QBridgeProtocolGroupRowStatus RowStatus

Ieee8021QBridgeProtocolPortEntry  
SEQUENCE    
  ieee8021QBridgeProtocolPortGroupId Integer32
  ieee8021QBridgeProtocolPortGroupVid VlanId
  ieee8021QBridgeProtocolPortRowStatus RowStatus

Ieee8021QBridgeVIDXEntry  
SEQUENCE    
  ieee8021QBridgeVIDXLocalVid VlanId
  ieee8021QBridgeVIDXRelayVid VlanId
  ieee8021QBridgeVIDXRowStatus RowStatus

Ieee8021QBridgeEgressVidXEntry  
SEQUENCE    
  ieee8021QBridgeEgressVidXRelayVid VlanId
  ieee8021QBridgeEgressVidXLocalVid VlanId
  ieee8021QBridgeEgressVidXRowStatus RowStatus

Defined Values

ieee8021QBridgeMib 1.3.111.2.802.1.1.4
The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-2011. This MIB module is derived from the IETF Q-BRIDGE-MIB from RFC 4363. Unless otherwise indicated, the references in this MIB module are to IEEE 802.1Q-2010. Copyright (C) IEEE. This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
MODULE-IDENTITY    

ieee8021QBridgeMibObjects 1.3.111.2.802.1.1.4.1
OBJECT IDENTIFIER    

ieee8021QBridgeBase 1.3.111.2.802.1.1.4.1.1
OBJECT IDENTIFIER    

ieee8021QBridgeTp 1.3.111.2.802.1.1.4.1.2
OBJECT IDENTIFIER    

ieee8021QBridgeStatic 1.3.111.2.802.1.1.4.1.3
OBJECT IDENTIFIER    

ieee8021QBridgeVlan 1.3.111.2.802.1.1.4.1.4
OBJECT IDENTIFIER    

ieee8021QBridgeProtocol 1.3.111.2.802.1.1.4.1.5
OBJECT IDENTIFIER    

ieee8021QBridgeVIDX 1.3.111.2.802.1.1.4.1.6
OBJECT IDENTIFIER    

ieee8021QBridgeTable 1.3.111.2.802.1.1.4.1.1.1
A table that contains generic information about every VLAN bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeEntry

ieee8021QBridgeEntry 1.3.111.2.802.1.1.4.1.1.1.1
A list of objects containing information for each VLAN bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeEntry  

ieee8021QBridgeComponentId 1.3.111.2.802.1.1.4.1.1.1.1.1
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeVlanVersionNumber 1.3.111.2.802.1.1.4.1.1.1.1.2
The version number of IEEE 802.1Q that this device supports. Reported as 1 by VLAN Bridges that support only SST operation, and reported as 2 by VLAN Bridges that support MST operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER version1(1), version2(2)  

ieee8021QBridgeMaxVlanId 1.3.111.2.802.1.1.4.1.1.1.1.3
The maximum IEEE 802.1Q VLAN-ID that this device supports.
Status: current Access: read-only
OBJECT-TYPE    
  VlanId  

ieee8021QBridgeMaxSupportedVlans 1.3.111.2.802.1.1.4.1.1.1.1.4
The maximum number of IEEE 802.1Q VLANs that this device supports.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021QBridgeNumVlans 1.3.111.2.802.1.1.4.1.1.1.1.5
The current number of IEEE 802.1Q VLANs that are configured in this device.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ieee8021QBridgeMvrpEnabledStatus 1.3.111.2.802.1.1.4.1.1.1.1.6
The administrative status requested by management for MVRP. The value true(1) indicates that MVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When false(2), MVRP is disabled on all ports, and all MVRP packets will be forwarded transparently. This object affects all MVRP Applicant and Registrar state machines. A transition from false(2) to true(1) will cause a reset of all MVRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ieee8021QBridgeCVlanPortTable 1.3.111.2.802.1.1.4.1.1.2
This table provides the capability to create and delete customer VLAN ports. Entries in this table must be persistent over power up restart/reboot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeCVlanPortEntry

ieee8021QBridgeCVlanPortEntry 1.3.111.2.802.1.1.4.1.1.2.1
A list of objects containing information for each VLAN bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeCVlanPortEntry  

ieee8021QBridgeCVlanPortComponentId 1.3.111.2.802.1.1.4.1.1.2.1.1
The componentcontaining the customer VLAN port represented by this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeCVlanPortNumber 1.3.111.2.802.1.1.4.1.1.2.1.2
The customer VLAN port number represented by this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021BridgePortNumber  

ieee8021QBridgeCVlanPortRowStatus 1.3.111.2.802.1.1.4.1.1.2.1.3
This indicates the status of the entry, and is used to create and delete entries in this table. Each entry in this table that is valid will have a corresponding entry in the ieee8021BridgeBasePortTable whose value for ieee8021BridgeBasePortType is customerVlanPort(2). The corresponding value of ieee8021BridgeBasePortIfIndex must be set at the time the value of this object transitions to valid(1). Entries in this table must be persistent across reinitializations of the management system.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeFdbTable 1.3.111.2.802.1.1.4.1.2.1
A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the ieee8021QBridgeVlanCurrentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeFdbEntry

ieee8021QBridgeFdbEntry 1.3.111.2.802.1.1.4.1.2.1.1
Information about a specific Filtering Database.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeFdbEntry  

ieee8021QBridgeFdbComponentId 1.3.111.2.802.1.1.4.1.2.1.1.1
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeFdbId 1.3.111.2.802.1.1.4.1.2.1.1.2
The identity of this Filtering Database.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ieee8021QBridgeFdbDynamicCount 1.3.111.2.802.1.1.4.1.2.1.1.3
The current number of dynamic entries in this Filtering Database.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ieee8021QBridgeFdbLearnedEntryDiscards 1.3.111.2.802.1.1.4.1.2.1.1.4
The total number of Filtering Database entries that have been or would have been learned, but have been discarded due to a lack of storage space in the Filtering Database. If this counter is increasing, it indicates that the Filtering Database is regularly becoming full (a condition that has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent. Discontinuities in the value of the counter can occur at re-initialization of the management system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ieee8021QBridgeFdbAgingTime 1.3.111.2.802.1.1.4.1.2.1.1.5
The timeout period in seconds for aging out dynamically-learned forwarding information. 802.1D-1998 recommends a default of 300 seconds. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..1000000  

ieee8021QBridgeTpFdbTable 1.3.111.2.802.1.1.4.1.2.2
A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeTpFdbEntry

ieee8021QBridgeTpFdbEntry 1.3.111.2.802.1.1.4.1.2.2.1
Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeTpFdbEntry  

ieee8021QBridgeTpFdbAddress 1.3.111.2.802.1.1.4.1.2.2.1.1
A unicast MAC address for which the device has forwarding and/or filtering information.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

ieee8021QBridgeTpFdbPort 1.3.111.2.802.1.1.4.1.2.2.1.2
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of ieee8021QBridgeTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g., in the ieee8021QBridgeStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of ieee8021QBridgeTpFdbStatus is not learned(3).
Status: current Access: read-only
OBJECT-TYPE    
  IEEE8021BridgePortNumberOrZero  

ieee8021QBridgeTpFdbStatus 1.3.111.2.802.1.1.4.1.2.2.1.3
The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of ieee8021QBridgeTpFdbPort, nor an entry in the ieee8021QBridgeStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of ieee8021QBridgeTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of ieee8021QBridgeTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of ieee8021QBridgeTpFdbAddress represents one of the device's addresses. The corresponding instance of ieee8021QBridgeTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of ieee8021QBridgeTpFdbAddress is also the value of an existing instance of ieee8021QBridgeStaticUnicastAddress.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5)  

ieee8021QBridgeTpGroupTable 1.3.111.2.802.1.1.4.1.2.3
A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learned dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeTpGroupEntry

ieee8021QBridgeTpGroupEntry 1.3.111.2.802.1.1.4.1.2.3.1
Filtering information configured into the bridge by management, or learned dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address are allowed to be forwarded. The subset of these ports learned dynamically is also provided.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeTpGroupEntry  

ieee8021QBridgeTpGroupAddress 1.3.111.2.802.1.1.4.1.2.3.1.1
The destination Group MAC address in a frame to which this entry's filtering information applies.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

ieee8021QBridgeTpGroupEgressPorts 1.3.111.2.802.1.1.4.1.2.3.1.2
The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the ieee8021QBridgeForwardAllPorts list.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

ieee8021QBridgeTpGroupLearnt 1.3.111.2.802.1.1.4.1.2.3.1.3
The subset of ports in ieee8021QBridgeTpGroupEgressPorts that were learned by MMRP or some other dynamic mechanism, in this Filtering database.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

ieee8021QBridgeForwardAllTable 1.3.111.2.802.1.1.4.1.2.4
A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by management or dynamically by MMRP. An entry appears in this table for all VLANs that are currently instantiated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeForwardAllEntry

ieee8021QBridgeForwardAllEntry 1.3.111.2.802.1.1.4.1.2.4.1
Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically by MMRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeForwardAllEntry  

ieee8021QBridgeForwardAllVlanIndex 1.3.111.2.802.1.1.4.1.2.4.1.1
The VLAN-ID or other identifier referring to this VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021VlanIndexOrWildcard  

ieee8021QBridgeForwardAllPorts 1.3.111.2.802.1.1.4.1.2.4.1.2
The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by MMRP, or configured statically by management.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

ieee8021QBridgeForwardAllStaticPorts 1.3.111.2.802.1.1.4.1.2.4.1.3
The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by ieee8021QBridgeForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by ieee8021QBridgeVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

ieee8021QBridgeForwardAllForbiddenPorts 1.3.111.2.802.1.1.4.1.2.4.1.4
The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by MMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardAllStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

ieee8021QBridgeForwardUnregisteredTable 1.3.111.2.802.1.1.4.1.2.5
A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which no more specific forwarding information applies. This is configured statically by management and determined dynamically by MMRP. An entry appears in this table for all VLANs that are currently instantiated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeForwardUnregisteredEntry

ieee8021QBridgeForwardUnregisteredEntry 1.3.111.2.802.1.1.4.1.2.5.1
Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forwarded. This is configured statically by management or dynamically by MMRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeForwardUnregisteredEntry  

ieee8021QBridgeForwardUnregisteredVlanIndex 1.3.111.2.802.1.1.4.1.2.5.1.1
The VLAN-ID or other identifier referring to this VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021VlanIndexOrWildcard  

ieee8021QBridgeForwardUnregisteredPorts 1.3.111.2.802.1.1.4.1.2.5.1.2
The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by MMRP, or configured statically by management.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

ieee8021QBridgeForwardUnregisteredStaticPorts 1.3.111.2.802.1.1.4.1.2.5.1.3
The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this list will also appear in the complete set shown by ieee8021QBridgeForwardUnregisteredPorts. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardUnregisteredForbiddenPorts. The default value is a string of zeros of appropriate length, although this has no effect with the default value of ieee8021QBridgeForwardAllStaticPorts. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

ieee8021QBridgeForwardUnregisteredForbiddenPorts 1.3.111.2.802.1.1.4.1.2.5.1.4
The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by MMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardUnregisteredStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

ieee8021QBridgeStaticUnicastTable 1.3.111.2.802.1.1.4.1.3.1
A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. Entries are valid for unicast addresses only. Two modes of operation are supported by this table. When the receive port index is non-zero, this table is supporting an 802.1D filtering database as specified in 14.7.6.1. If the receive port is zero, the table is operating as specified in 802.1Q 8.8.1 and 12.7.7. An agent must at least support the 802.1Q mode of operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeStaticUnicastEntry

ieee8021QBridgeStaticUnicastEntry 1.3.111.2.802.1.1.4.1.3.1.1
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeStaticUnicastEntry  

ieee8021QBridgeStaticUnicastComponentId 1.3.111.2.802.1.1.4.1.3.1.1.1
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeStaticUnicastVlanIndex 1.3.111.2.802.1.1.4.1.3.1.1.2
The Vlan to which this entry applies.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021VlanIndexOrWildcard  

ieee8021QBridgeStaticUnicastAddress 1.3.111.2.802.1.1.4.1.3.1.1.3
The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

ieee8021QBridgeStaticUnicastReceivePort 1.3.111.2.802.1.1.4.1.3.1.1.4
Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. An implementation is required to support the '0' value and may optionally support non-zero values for this column.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021BridgePortNumberOrZero  

ieee8021QBridgeStaticUnicastStaticEgressPorts 1.3.111.2.802.1.1.4.1.3.1.1.5
The set of ports to which frames received from a specific port and destined for a specific unicast address must be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeStaticUnicastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

ieee8021QBridgeStaticUnicastForbiddenEgressPorts 1.3.111.2.802.1.1.4.1.3.1.1.6
The set of ports to which frames received from a specific port and destined for a specific unicast MAC address must not be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeStaticUnicastStaticEgressPorts. The default value of this object is a string of zeros of appropriate length.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

ieee8021QBridgeStaticUnicastStorageType 1.3.111.2.802.1.1.4.1.3.1.1.7
The storage type for this conceptual row. If this object has a value of permanent(4), then no other objects are required to be able to be modified.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ieee8021QBridgeStaticUnicastRowStatus 1.3.111.2.802.1.1.4.1.3.1.1.8
This object indicates the status of this entry, and is used to create/delete entries in the table. An entry of this table may be set to active without setting any other columns of the table. Also, other columns of this table may be set while the value of this object is active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeStaticMulticastTable 1.3.111.2.802.1.1.4.1.3.2
A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeStaticMulticastEntry

ieee8021QBridgeStaticMulticastEntry 1.3.111.2.802.1.1.4.1.3.2.1
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeStaticMulticastEntry  

ieee8021QBridgeStaticMulticastAddress 1.3.111.2.802.1.1.4.1.3.2.1.1
The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

ieee8021QBridgeStaticMulticastReceivePort 1.3.111.2.802.1.1.4.1.3.2.1.2
Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. An implementation is required to support the '0' value and may optionally support non-zero values for this column.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021BridgePortNumberOrZero  

ieee8021QBridgeStaticMulticastStaticEgressPorts 1.3.111.2.802.1.1.4.1.3.2.1.3
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeStaticMulticastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

ieee8021QBridgeStaticMulticastForbiddenEgressPorts 1.3.111.2.802.1.1.4.1.3.2.1.4
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeStaticMulticastStaticEgressPorts. The default value of this object is a string of zeros of appropriate length.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

ieee8021QBridgeStaticMulticastStorageType 1.3.111.2.802.1.1.4.1.3.2.1.5
The storage type for this conceptual row. If this object has a value of permanent(4), then no other objects are required to be able to be modified.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

ieee8021QBridgeStaticMulticastRowStatus 1.3.111.2.802.1.1.4.1.3.2.1.6
This object indicates the status of this entry, and is used to create/delete entries in the table. An entry of this table may be set to active without setting any other columns of the table. Also, other columns of this table may be set while the value of this object is active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeVlanNumDeletes 1.3.111.2.802.1.1.4.1.4.1
The number of times a VLAN entry has been deleted from the ieee8021QBridgeVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. Discontinuities in this value can only occur at a reboot.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ieee8021QBridgeVlanCurrentTable 1.3.111.2.802.1.1.4.1.4.2
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of MVRP requests received.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeVlanCurrentEntry

ieee8021QBridgeVlanCurrentEntry 1.3.111.2.802.1.1.4.1.4.2.1
Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of MVRP requests received.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeVlanCurrentEntry  

ieee8021QBridgeVlanTimeMark 1.3.111.2.802.1.1.4.1.4.2.1.1
A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
Status: current Access: not-accessible
OBJECT-TYPE    
  TimeFilter  

ieee8021QBridgeVlanCurrentComponentId 1.3.111.2.802.1.1.4.1.4.2.1.2
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeVlanIndex 1.3.111.2.802.1.1.4.1.4.2.1.3
The VLAN-ID or other identifier referring to this VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021VlanIndex  

ieee8021QBridgeVlanFdbId 1.3.111.2.802.1.1.4.1.4.2.1.4
The Filtering Database used by this VLAN. This is one of the ieee8021QBridgeFdbId values in the ieee8021QBridgeFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by MVRP, or by management, in ieee8021QBridgeVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in ieee8021QBridgeLearningConstraintsTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021QBridgeVlanCurrentEgressPorts 1.3.111.2.802.1.1.4.1.4.2.1.5
The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

ieee8021QBridgeVlanCurrentUntaggedPorts 1.3.111.2.802.1.1.4.1.4.2.1.6
The set of ports that are transmitting traffic for this VLAN as untagged frames.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

ieee8021QBridgeVlanStatus 1.3.111.2.802.1.1.4.1.4.2.1.7
This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in ieee8021QBridgeVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent ieee8021QBridgeVlanStaticTable entry and ports learned dynamically. dynamicMvrp(3) - this entry is currently in use and will remain so until removed by MVRP. There is no static entry for this VLAN, and it will be removed when the last port leaves the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), permanent(2), dynamicMvrp(3)  

ieee8021QBridgeVlanCreationTime 1.3.111.2.802.1.1.4.1.4.2.1.8
The value of sysUpTime when this VLAN was created.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ieee8021QBridgeVlanStaticTable 1.3.111.2.802.1.1.4.1.4.3
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are persistent and will be restored after the device is reset.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeVlanStaticEntry

ieee8021QBridgeVlanStaticEntry 1.3.111.2.802.1.1.4.1.4.3.1
Static information for a VLAN configured into the device by (local or network) management.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeVlanStaticEntry  

ieee8021QBridgeVlanStaticComponentId 1.3.111.2.802.1.1.4.1.4.3.1.1
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeVlanStaticVlanIndex 1.3.111.2.802.1.1.4.1.4.3.1.2
The VLAN-ID or other identifier referring to this VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021VlanIndex  

ieee8021QBridgeVlanStaticName 1.3.111.2.802.1.1.4.1.4.3.1.3
An administratively assigned string, which may be used to identify the VLAN.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ieee8021QBridgeVlanStaticEgressPorts 1.3.111.2.802.1.1.4.1.4.3.1.4
The set of ports that are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port, per-VLAN Registrar control for Registration Fixed for the relevant MVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

ieee8021QBridgeVlanForbiddenEgressPorts 1.3.111.2.802.1.1.4.1.4.3.1.5
The set of ports that are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port, per-VLAN Registrar control for Registration Forbidden for the relevant MVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

ieee8021QBridgeVlanStaticUntaggedPorts 1.3.111.2.802.1.1.4.1.4.3.1.6
The set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (ieee8021QBridgeVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

ieee8021QBridgeVlanStaticRowStatus 1.3.111.2.802.1.1.4.1.4.3.1.7
This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeNextFreeLocalVlanTable 1.3.111.2.802.1.1.4.1.4.4
A table that contains information about the next free VLAN value for a statically configured VLAN bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeNextFreeLocalVlanEntry

ieee8021QBridgeNextFreeLocalVlanEntry 1.3.111.2.802.1.1.4.1.4.4.1
The next free VLAN value for a statically configured VLAN bridge
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeNextFreeLocalVlanEntry  

ieee8021QBridgeNextFreeLocalVlanComponentId 1.3.111.2.802.1.1.4.1.4.4.1.1
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeNextFreeLocalVlanIndex 1.3.111.2.802.1.1.4.1.4.4.1.2
The next available value for ieee8021QBridgeVlanIndex of a local VLAN entry in ieee8021QBridgeVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possible. A row creation operation in this table for an entry with a local VlanIndex value may fail if the current value of this object is not used as the index. Even if the value read is used, there is no guarantee that it will still be the valid index when the create operation is attempted; another manager may have already got in during the intervening time interval. In this case, ieee8021QBridgeNextFreeLocalVlanIndex should be re-read and the creation re-tried with the new value. This value will automatically change when the current value is used to create a new row.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 4096..4294967295  

ieee8021QBridgePortVlanTable 1.3.111.2.802.1.1.4.1.4.5
A table containing per-port control and status information for VLAN configuration in the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgePortVlanEntry

ieee8021QBridgePortVlanEntry 1.3.111.2.802.1.1.4.1.4.5.1
Information controlling VLAN configuration for a port on the device. This is indexed by ieee8021BridgeBasePort.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgePortVlanEntry  

ieee8021QBridgePvid 1.3.111.2.802.1.1.4.1.4.5.1.1
The PVID, the VLAN-ID assigned to untagged frames or Priority-Tagged frames received on this port. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  IEEE8021VlanIndex  

ieee8021QBridgePortAcceptableFrameTypes 1.3.111.2.802.1.1.4.1.4.5.1.2
When this is admitTagged(3), the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to a VID based on the PVID and VID Set for this port. This control does not affect VLAN-independent Bridge Protocol Data Unit (BPDU) frames, such as MVRP and Spanning Tree Protocol (STP). It does affect VLAN- dependent BPDU frames, such as MMRP. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  IEEE8021PortAcceptableFrameTypes  

ieee8021QBridgePortIngressFiltering 1.3.111.2.802.1.1.4.1.4.5.1.3
When this is true(1), the device will discard incoming frames for VLANs that do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN-independent BPDU frames, such as MVRP and STP. It does affect VLAN- dependent BPDU frames, such as MMRP. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ieee8021QBridgePortMvrpEnabledStatus 1.3.111.2.802.1.1.4.1.4.5.1.4
The state of MVRP operation on this port. The value true(1) indicates that MVRP is enabled on this port, as long as ieee8021QBridgeMvrpEnabledStatus is also enabled for this device. When false(2) but ieee8021QBridgeMvrpEnabledStatus is still enabled for the device, MVRP is disabled on this port: any MVRP packets received will be silently discarded, and no MVRP registrations will be propagated from other ports. This object affects all MVRP Applicant and Registrar state machines on this port. A transition from false(2) to true(1) will cause a reset of all MVRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ieee8021QBridgePortMvrpFailedRegistrations 1.3.111.2.802.1.1.4.1.4.5.1.5
The total number of failed MVRP registrations, for any reason, on this port. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ieee8021QBridgePortMvrpLastPduOrigin 1.3.111.2.802.1.1.4.1.4.5.1.6
The Source MAC Address of the last MVRP message received on this port.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

ieee8021QBridgePortRestrictedVlanRegistration 1.3.111.2.802.1.1.4.1.4.5.1.7
The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned, in which the Registrar Administrative Control value for this port is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ieee8021QBridgePortVlanStatisticsTable 1.3.111.2.802.1.1.4.1.4.6
A table containing per-port, per-VLAN statistics for traffic received.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgePortVlanStatisticsEntry

ieee8021QBridgePortVlanStatisticsEntry 1.3.111.2.802.1.1.4.1.4.6.1
Traffic statistics for a VLAN on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgePortVlanStatisticsEntry  

ieee8021QBridgeTpVlanPortInFrames 1.3.111.2.802.1.1.4.1.4.6.1.1
The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwarding process for this VLAN. This object includes received bridge management frames classified as belonging to this VLAN (e.g., MMRP, but not MVRP or STP. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ieee8021QBridgeTpVlanPortOutFrames 1.3.111.2.802.1.1.4.1.4.6.1.2
The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to this VLAN (e.g., MMRP, but not MVRP or STP). Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ieee8021QBridgeTpVlanPortInDiscards 1.3.111.2.802.1.1.4.1.4.6.1.3
The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ieee8021QBridgeLearningConstraintsTable 1.3.111.2.802.1.1.4.1.4.8
A table containing learning constraints for sets of Shared and Independent VLANs. Entries in this table are persistent and are preserved across reboots.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeLearningConstraintsEntry

ieee8021QBridgeLearningConstraintsEntry 1.3.111.2.802.1.1.4.1.4.8.1
A learning constraint defined for a VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeLearningConstraintsEntry  

ieee8021QBridgeLearningConstraintsComponentId 1.3.111.2.802.1.1.4.1.4.8.1.1
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeLearningConstraintsVlan 1.3.111.2.802.1.1.4.1.4.8.1.2
The index of the row in ieee8021QBridgeVlanCurrentTable for the VLAN constrained by this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021VlanIndex  

ieee8021QBridgeLearningConstraintsSet 1.3.111.2.802.1.1.4.1.4.8.1.3
The identity of the constraint set to which ieee8021QBridgeLearningConstraintsVlan belongs. These values may be chosen by the management station.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

ieee8021QBridgeLearningConstraintsType 1.3.111.2.802.1.1.4.1.4.8.1.4
The type of constraint this entry defines. independent(1) - the VLAN, ieee8021QBridgeLearningConstraintsVlan, uses a filtering database independent from all other VLANs in the same set, defined by ieee8021QBridgeLearningConstraintsSet. shared(2) - the VLAN, ieee8021QBridgeLearningConstraintsVlan, shares the same filtering database as all other VLANs in the same set, defined by ieee8021QBridgeLearningConstraintsSet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER independent(1), shared(2)  

ieee8021QBridgeLearningConstraintsStatus 1.3.111.2.802.1.1.4.1.4.8.1.5
The status of this entry. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeLearningConstraintDefaultsTable 1.3.111.2.802.1.1.4.1.4.9
A table containing learning constraints for sets of Shared and Independent VLANs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeLearningConstraintDefaultsEntry

ieee8021QBridgeLearningConstraintDefaultsEntry 1.3.111.2.802.1.1.4.1.4.9.1
A learning constraint defined for a VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeLearningConstraintDefaultsEntry  

ieee8021QBridgeLearningConstraintDefaultsComponentId 1.3.111.2.802.1.1.4.1.4.9.1.1
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeLearningConstraintDefaultsSet 1.3.111.2.802.1.1.4.1.4.9.1.2
The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in ieee8021QBridgeLearningConstraintsTable. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

ieee8021QBridgeLearningConstraintDefaultsType 1.3.111.2.802.1.1.4.1.4.9.1.3
The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in ieee8021QBridgeLearningConstraintsTable. The types are as defined for ieee8021QBridgeLearningConstraintsType. The value of this object MUST be retained across reinitializations of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER independent(1), shared(2)  

ieee8021QBridgeProtocolGroupTable 1.3.111.2.802.1.1.4.1.5.1
A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification. Entries in this table must be persistent over power up restart/reboot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeProtocolGroupEntry

ieee8021QBridgeProtocolGroupEntry 1.3.111.2.802.1.1.4.1.5.1.1
A mapping from a Protocol Template to a Protocol Group Identifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeProtocolGroupEntry  

ieee8021QBridgeProtocolGroupComponentId 1.3.111.2.802.1.1.4.1.5.1.1.1
The component identifier is used to distinguish between the multiple virtual bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021QBridgeProtocolTemplateFrameType 1.3.111.2.802.1.1.4.1.5.1.1.2
The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ethernet(1), rfc1042(2), snap8021H(3), snapOther(4), llcOther(5)  

ieee8021QBridgeProtocolTemplateProtocolValue 1.3.111.2.802.1.1.4.1.5.1.1.3
The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(2|5)  

ieee8021QBridgeProtocolGroupId 1.3.111.2.802.1.1.4.1.5.1.1.4
Represents a group of protocols that are associated together when assigning a VID to a frame.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

ieee8021QBridgeProtocolGroupRowStatus 1.3.111.2.802.1.1.4.1.5.1.1.5
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeProtocolPortTable 1.3.111.2.802.1.1.4.1.5.2
A table that contains VID sets used for Port-and-Protocol-based VLAN Classification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeProtocolPortEntry

ieee8021QBridgeProtocolPortEntry 1.3.111.2.802.1.1.4.1.5.2.1
A VID set for a port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeProtocolPortEntry  

ieee8021QBridgeProtocolPortGroupId 1.3.111.2.802.1.1.4.1.5.2.1.1
Designates a group of protocols in the Protocol Group Database.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

ieee8021QBridgeProtocolPortGroupVid 1.3.111.2.802.1.1.4.1.5.2.1.2
The VID associated with a group of protocols for each port.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

ieee8021QBridgeProtocolPortRowStatus 1.3.111.2.802.1.1.4.1.5.2.1.3
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeVIDXTable 1.3.111.2.802.1.1.4.1.6.1
This table is used to configure the VID Translation Table defined in 12.10.1.8 and 6.9. The Bridge VID Translation Table is used to implement a mapping between a local VID, and a relay VID, used by the filtering and forwarding process. Each row in this table is indexed by component, port, and local VID value and a value to be used for the specified VID as specified in (6.9). Entries in this table must be persistent over power up restart/reboot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeVIDXEntry

ieee8021QBridgeVIDXEntry 1.3.111.2.802.1.1.4.1.6.1.1
An entry for the S-VID translation table which includes both the Local and Relay S-VIDs.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeVIDXEntry  

ieee8021QBridgeVIDXLocalVid 1.3.111.2.802.1.1.4.1.6.1.1.1
The Local VID after translation received at the ISS or EISS.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

ieee8021QBridgeVIDXRelayVid 1.3.111.2.802.1.1.4.1.6.1.1.2
The Relay VID received before translation received at ISS or EISS.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

ieee8021QBridgeVIDXRowStatus 1.3.111.2.802.1.1.4.1.6.1.1.3
This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeEgressVidXTable 1.3.111.2.802.1.1.4.1.6.2
This table is used to configure the VID Translation Table defined in 12.10.1.9 and 6.9. The Bridge VID Egress Translation Table is used to implement a mapping between a relay VID, and a local VID, used by the filtering and forwarding process. Each row in this table is indexed by component, port, and relay VID value and a value to be used for the specified local VID as specified in (6.9). Entries in this table must be persistent over power up restart/reboot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021QBridgeEgressVidXEntry

ieee8021QBridgeEgressVidXEntry 1.3.111.2.802.1.1.4.1.6.2.1
An entry for the Egress VID translation table which includes both the relay and local IDs between which the PNP or CNP translates.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021QBridgeEgressVidXEntry  

ieee8021QBridgeEgressVidXRelayVid 1.3.111.2.802.1.1.4.1.6.2.1.1
The Relay VID after translation transmitted to the ISS or EISS.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

ieee8021QBridgeEgressVidXLocalVid 1.3.111.2.802.1.1.4.1.6.2.1.2
The Local VID before translation transmitted to the ISS or EISS.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

ieee8021QBridgeEgressVidXRowStatus 1.3.111.2.802.1.1.4.1.6.2.1.3
This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ieee8021QBridgeConformance 1.3.111.2.802.1.1.4.2
OBJECT IDENTIFIER    

ieee8021QBridgeGroups 1.3.111.2.802.1.1.4.2.1
OBJECT IDENTIFIER    

ieee8021QBridgeCompliances 1.3.111.2.802.1.1.4.2.2
OBJECT IDENTIFIER    

ieee8021QBridgeBaseGroup 1.3.111.2.802.1.1.4.2.1.1
A collection of objects providing device-level control and status information for the Virtual LAN bridge services.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeFdbUnicastGroup 1.3.111.2.802.1.1.4.2.1.2
A collection of objects providing information about all unicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeFdbMulticastGroup 1.3.111.2.802.1.1.4.2.1.3
A collection of objects providing information about all multicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeServiceRequirementsGroup 1.3.111.2.802.1.1.4.2.1.4
A collection of objects providing information about service requirements, learned dynamically or statically configured by management, in each Filtering Database.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeFdbStaticGroup 1.3.111.2.802.1.1.4.2.1.5
A collection of objects providing information about unicast and multicast addresses statically configured by management, in each Filtering Database or VLAN.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeVlanGroup 1.3.111.2.802.1.1.4.2.1.6
A collection of objects providing information about all VLANs currently configured on this device.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeVlanStaticGroup 1.3.111.2.802.1.1.4.2.1.7
A collection of objects providing information about VLANs statically configured by management.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeVlanStatisticsGroup 1.3.111.2.802.1.1.4.2.1.8
A collection of objects providing per-port packet statistics for all VLANs currently configured on this device.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeLearningConstraintsGroup 1.3.111.2.802.1.1.4.2.1.9
A collection of objects defining the Filtering Database constraints all VLANs have with each other.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeLearningConstraintDefaultGroup 1.3.111.2.802.1.1.4.2.1.10
A collection of objects defining the default Filtering Database constraints for VLANs that have no specific constraints defined.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeClassificationDeviceGroup 1.3.111.2.802.1.1.4.2.1.11
VLAN classification information for the bridge.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeClassificationPortGroup 1.3.111.2.802.1.1.4.2.1.12
VLAN classification information for individual ports.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgePortGroup2 1.3.111.2.802.1.1.4.2.1.13
A collection of objects providing port-level VLAN control and status information for all ports.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeCVlanPortGroup 1.3.111.2.802.1.1.4.2.1.14
Objects used to create/delete customer VLAN ports.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeVIDXGroup 1.3.111.2.802.1.1.4.2.1.15
Ingress or Ingress/Egress VID translation for individual ports.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeEgressVIDXGroup 1.3.111.2.802.1.1.4.2.1.16
Egress VID translation for individual ports.
Status: current Access: read-create
OBJECT-GROUP    

ieee8021QBridgeCompliance 1.3.111.2.802.1.1.4.2.2.1
The compliance statement for device support of Virtual LAN Bridge services.
Status: current Access: read-only
MODULE-COMPLIANCE