IBMHPRROUTETEST-MIB

File: IBMHPRROUTETEST-MIB.mib (15561 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises Gauge DisplayString
OBJECT-TYPE

Defined Types

IbmHprRtGenEntry  
SEQUENCE    
  ibmHprRtGenTestId Gauge
  ibmHprRtGenTestType INTEGER
  ibmHprRtGenConnTrigger OCTET STRING
  ibmHprRtGenNameTrigger DisplayString
  ibmHprRtGenResult INTEGER
  ibmHprRtGenSenseCode OCTET STRING
  ibmHprRtGenCosName DisplayString
  ibmHprRtGenRscv OCTET STRING

IbmHprRtDetEntry  
SEQUENCE    
  ibmHprRtDetTestId Gauge
  ibmHprRtDetSubTestId INTEGER
  ibmHprRtDetDestNode DisplayString
  ibmHprRtDetPriorNode DisplayString
  ibmHprRtDetLastTgNumber INTEGER
  ibmHprRtDetRtripTime Gauge
  ibmHprRtDetResult INTEGER

Defined Values

ibm 1.3.6.1.4.1.2
OBJECT IDENTIFIER    

ibmArchitecture 1.3.6.1.4.1.2.5
OBJECT IDENTIFIER    

hpr 1.3.6.1.4.1.2.5.10
OBJECT IDENTIFIER    

ibmHprRouteTest 1.3.6.1.4.1.2.5.10.4
OBJECT IDENTIFIER    

ibmHprRtGlobe 1.3.6.1.4.1.2.5.10.4.1
OBJECT IDENTIFIER    

ibmHprRtGlobeConnTrigger 1.3.6.1.4.1.2.5.10.4.1.1
This object is used to trigger an HPR route test of the physical path of an existing RTP Connection. The format of this object is: nceid-length.nceid.tcid, where - nceid-length: 1 octet. valid values are 1-8. - nceid: 1-8 octets. - tcid: 8 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0|10..17)  

ibmHprRtGlobeNameTrigger 1.3.6.1.4.1.2.5.10.4.1.2
This object is used to trigger an HPR route test of the physical path of an existing or non-existing RTP Connection. The names will be used to generate a HPR Route which may or may not match an existing RTP Connection; but must be reside on a current or potential RTP Connection endpoint node. The format of this object is: netid.lu-name.mode-name, where - netid: 1-8 octets. - period: 1 octet. - lu-name: 1-8 octets. - period: 1 octet. - mode-name: 1-8 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0|5..26)  

ibmHprRtGenResults 1.3.6.1.4.1.2.5.10.4.2
OBJECT IDENTIFIER    

ibmHprRtGenTable 1.3.6.1.4.1.2.5.10.4.2.1
The HPR Route Test General Results Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IbmHprRtGenEntry

ibmHprRtGenEntry 1.3.6.1.4.1.2.5.10.4.2.1.1
The HPR Route Test Id is used to index to this table. This Id is an integer that begins at 1 and is incremented with each route test executed on the agent node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IbmHprRtGenEntry  

ibmHprRtGenTestId 1.3.6.1.4.1.2.5.10.4.2.1.1.1
The route test id. This Id is an integer that begins at 1 and is incremented with each route test execution.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ibmHprRtGenTestType 1.3.6.1.4.1.2.5.10.4.2.1.1.2
The route test type. This indicates whether the route test was triggered by setting the: 1. global connection trigger, or 2. global name trigger.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connTrigger(1), nameTrigger(2)  

ibmHprRtGenConnTrigger 1.3.6.1.4.1.2.5.10.4.2.1.1.3
This object will be valid if the route test was triggered by setting the global connection trigger. If the route test was triggered by setting the global name trigger, this object will return the zero-length string. When it is not null, the format of this object is: nceid-length.nceid.tcid, where - nceid-length: 1 octet. valid values are 1-8. - nceid: 1-8 octets. - tcid: 8 octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0|10..17)  

ibmHprRtGenNameTrigger 1.3.6.1.4.1.2.5.10.4.2.1.1.4
This object will be valid if the route test was triggered by setting the global name trigger. If the route test was triggered by setting the global connection trigger, this object will return the zero-length string. When it is not null, the format of this object is: netid.lu-name.mode-name, where - netid: 1-8 octets. - period: 1 octet. - lu-name: 1-8 octets. - period: 1 octet. - mode-name: 1-8 octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0|5..26)  

ibmHprRtGenResult 1.3.6.1.4.1.2.5.10.4.2.1.1.5
The route test result. This indicates whether the route test was: 1. successfully executed, or 2. in progress and has not completed yet, or 3. no response was received from one or more nodes, or 4. the nce id used to trigger the route test was invalid, or 5. the tcid used to trigger the route test was invalid, or 6. the lu name used to trigger the route test was invalid, or 7. the mode name used to trigger the route test was invalid for the lu name specified, or 8. a contiguous hpr route from this node to the target lu does not exist and cannot be created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER successful(1), inProgess(2), noResponse(3), nceidInvalid(4), tcidInvalid(5), luInvalid(6), modeInvalid(7), noHprRoute(8)  

ibmHprRtGenSenseCode 1.3.6.1.4.1.2.5.10.4.2.1.1.6
The SNA sense data that corresponds to the route test result.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

ibmHprRtGenCosName 1.3.6.1.4.1.2.5.10.4.2.1.1.7
The class of service name used for this route test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

ibmHprRtGenRscv 1.3.6.1.4.1.2.5.10.4.2.1.1.8
The route selection control vector used for this route test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

ibmHprRtDetResults 1.3.6.1.4.1.2.5.10.4.3
OBJECT IDENTIFIER    

ibmHprRtDetTable 1.3.6.1.4.1.2.5.10.4.3.1
The HPR Route Test Detailed Results Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IbmHprRtDetEntry

ibmHprRtDetEntry 1.3.6.1.4.1.2.5.10.4.3.1.1
The HPR Route Test Id and HPR Route Sub Test Id are used to index this table. The Test Id is an integer that begins at 1 and is incremented with each route test execution. The Sub Test Id is an integer that begins at 1 and is incremented with each node along the path being tested.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IbmHprRtDetEntry  

ibmHprRtDetTestId 1.3.6.1.4.1.2.5.10.4.3.1.1.1
The route test id. This Id is an integer that begins at 1 and is incremented with each route test execution. If this object has the same value as the ibmHprRtGenTestId, then the two objects apply to the same route test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ibmHprRtDetSubTestId 1.3.6.1.4.1.2.5.10.4.3.1.1.2
The sub test id. This Id is an integer that begins at 1 and is incremented with each node along the path being tested. The last entry of the test will be designated by a value 255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ibmHprRtDetDestNode 1.3.6.1.4.1.2.5.10.4.3.1.1.3
The destination node name for this portion of the route test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..17)  

ibmHprRtDetPriorNode 1.3.6.1.4.1.2.5.10.4.3.1.1.4
The name of the node which is prior to the destination node for this portion of the route test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..17)  

ibmHprRtDetLastTgNumber 1.3.6.1.4.1.2.5.10.4.3.1.1.5
The last TG number for this portion of the route test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

ibmHprRtDetRtripTime 1.3.6.1.4.1.2.5.10.4.3.1.1.6
The round trip time for this portion of the route test. It is the total time from when the test frame was sent by this node to the time when the test frame was received back at this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ibmHprRtDetResult 1.3.6.1.4.1.2.5.10.4.3.1.1.7
The result of this portion of the route test. It indicates whether this portion of the route test was: 1. successfully executed, or 2. no response was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER successful(1), noResponse(2)