IBM-SYSTEM-MEMORY-MIB

File: IBM-SYSTEM-MEMORY-MIB.mib (7805 bytes)

Imported modules

Imported symbols

OBJECT-TYPE	TRAP-TYPE	ibmSystemMemory
Boolean	Uint8	Sint8
Uint16	Sint16	Uint32
Sint32	Uint64	Sint64
Real32	Real64	String
Datetime

Defined Types

IbmSystemPhysicalMemoryEntry
SEQUENCE
	ibmSystemPhysicalMemoryKeyIndex	String
	ibmSystemPhysicalMemoryIsActive	Boolean
	ibmSystemPhysicalMemoryHasError	Boolean
	ibmSystemPhysicalMemoryPoweredOn	Boolean
	ibmSystemPhysicalMemoryTotalWidth	Uint16
	ibmSystemPhysicalMemoryDataWidth	Uint16
	ibmSystemPhysicalMemoryFormFactor	Uint16
	ibmSystemPhysicalMemoryMemoryType	Uint16
	ibmSystemPhysicalMemoryTypeDetail	Uint16
	ibmSystemPhysicalMemorySpeed	Uint32
	ibmSystemPhysicalMemoryCapacity	Uint64
	ibmSystemPhysicalMemoryBankLabel	String
	ibmSystemPhysicalMemoryDeviceLocator	String
	ibmSystemPhysicalMemoryManufacturer	String
	ibmSystemPhysicalMemoryPartNumber	String
	ibmSystemPhysicalMemorySerialNumber	String
	ibmSystemPhysicalMemoryStatus	String

Defined Values

ibmSystemPhysicalMemoryTable		1.3.6.1.4.1.2.6.159.1.1.120.1
The IBMPSG_PhysicalMemory class represents an IBM managed Memory Array.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmSystemPhysicalMemoryEntry

ibmSystemPhysicalMemoryEntry		1.3.6.1.4.1.2.6.159.1.1.120.1.1
This class defines an entry for each IBMPSG_PhysicalMemory instance. Each instance of the IBMPSG_PhysicalMemory class contains status and descriptive information for each memory bank recognized by the operating system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmSystemPhysicalMemoryEntry

ibmSystemPhysicalMemoryKeyIndex		1.3.6.1.4.1.2.6.159.1.1.120.1.1.1
The index used by this table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	String

ibmSystemPhysicalMemoryIsActive		1.3.6.1.4.1.2.6.159.1.1.120.1.1.2
Indicates whether memory is active 1 - is active 0 - is not active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Boolean

ibmSystemPhysicalMemoryHasError		1.3.6.1.4.1.2.6.159.1.1.120.1.1.3
Indicates whether memory has error 1 - has error 0 - does not have error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Boolean

ibmSystemPhysicalMemoryPoweredOn		1.3.6.1.4.1.2.6.159.1.1.120.1.1.4
Indicates whether memory is powered on 1 - powered on 0 - powered off.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Boolean

ibmSystemPhysicalMemoryTotalWidth		1.3.6.1.4.1.2.6.159.1.1.120.1.1.5
Total width, in bits, of the PhysicalMemory, including check or error correction bits. If there are no error correction bits, the value in this property should match that specified for DataWidth.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Uint16

ibmSystemPhysicalMemoryDataWidth		1.3.6.1.4.1.2.6.159.1.1.120.1.1.6
Data width of the PhysicalMemory, in bits. A data width of 0 and a TotalWidth of 8 would indicate that the Memory is solely used to provide error correction bits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Uint16

ibmSystemPhysicalMemoryFormFactor		1.3.6.1.4.1.2.6.159.1.1.120.1.1.7
Refers to the physical packaging of the memory examples - DIMM,SIMM,Chip.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Uint16

ibmSystemPhysicalMemoryMemoryType		1.3.6.1.4.1.2.6.159.1.1.120.1.1.8
The type of PhysicalMemory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Uint16

ibmSystemPhysicalMemoryTypeDetail		1.3.6.1.4.1.2.6.159.1.1.120.1.1.9
Further Details about memory type examples - Fast-paged,static column,window DRAM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Uint16

ibmSystemPhysicalMemorySpeed		1.3.6.1.4.1.2.6.159.1.1.120.1.1.10
The speed of the PhysicalMemory, in nanoseconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Uint32

ibmSystemPhysicalMemoryCapacity		1.3.6.1.4.1.2.6.159.1.1.120.1.1.11
The total capacity of this PhysicalMemory, in bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Uint64

ibmSystemPhysicalMemoryBankLabel		1.3.6.1.4.1.2.6.159.1.1.120.1.1.12
A string identifying the physically labeled bank where the Memory is located - for example, 'Bank 0' or 'Bank A'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	String

ibmSystemPhysicalMemoryDeviceLocator		1.3.6.1.4.1.2.6.159.1.1.120.1.1.13
The physically labeled socket or board position where the memory device is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	String

ibmSystemPhysicalMemoryManufacturer		1.3.6.1.4.1.2.6.159.1.1.120.1.1.14
The name of the organization responsible for producing this Memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	String

ibmSystemPhysicalMemoryPartNumber		1.3.6.1.4.1.2.6.159.1.1.120.1.1.15
The part number for this memory device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	String

ibmSystemPhysicalMemorySerialNumber		1.3.6.1.4.1.2.6.159.1.1.120.1.1.16
A manufacturer-allocated number used to identify the Memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	String

ibmSystemPhysicalMemoryStatus		1.3.6.1.4.1.2.6.159.1.1.120.1.1.17
The current Status of the Memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	String

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor