Hub-rptr-prvt

File: Hub-rptr-prvt.mib (28662 bytes)

Imported modules

Imported symbols

OBJECT-TYPE	internet	DisplayString
Counter

Defined Types

XrptrGroupEntry
SEQUENCE
	xrptrGroupIndex	INTEGER
	xrptrGroupGlobalStatus	OCTET STRING
	xrptrGroupPrevStatus	OCTET STRING
	xrptrGroupGlobalError	INTEGER
	xrptrGroupJabberError	INTEGER
	xrptrGroupRepeaterCpuBlockError	INTEGER
	xrptrGroupAutoPartition	INTEGER
	xrptrGroupDetachStatus	INTEGER
	xrptrGroupGlobalCommandCode	INTEGER
	xrptrGroupTrapMask	INTEGER
	xrptrGroupLinkSelectHead1	INTEGER
	xrptrGroupBackupHead1State	INTEGER
	xrptrGroupMaxModuleNumber	INTEGER
	xrptrGroupSlotNumber	INTEGER
	xrptrGroupSlotInternalIndex	INTEGER

XrptrGroupFaultEntry
SEQUENCE
	xrptrGroupGroupIndex	INTEGER
	xrptrGroupFaultIndex	INTEGER
	xrptrGroupFaultReport	DisplayString

XrptrGroupPortEntry
SEQUENCE
	xrptrGroupPIndex	INTEGER
	xrptrGroupPortIndex	INTEGER
	xrptrGroupPortLinkStatus	INTEGER
	xrptrGroupPortRcvStatus	INTEGER
	xrptrGroupPortLinkFaults	Counter
	xrptrGroupPortAutoPartitions	Counter
	xrptrGroupPortAutoPartitionType	INTEGER

XrptrGroupRPortProtectEntry
SEQUENCE
	xrptrGroupRPortProtectGrIndex	INTEGER
	xrptrGroupRPortProtectPortIndex	INTEGER
	xrptrGroupRPortProtectPortState	INTEGER

XrptrGroupPPortProtectEntry
SEQUENCE
	xrptrGroupPPortProtectGrIndex	INTEGER
	xrptrGroupPPortProtectPortIndex	INTEGER
	xrptrGroupPPortProtectPortState	INTEGER

XrptrGroupModuleEntry
SEQUENCE
	xrptrGroupMIndex	INTEGER
	xrptrGroupModuleIndex	INTEGER
	xrptrGroupModuleStructInfo	INTEGER
	xrptrGroupModuleBackupState	INTEGER

Defined Values

private		1.3.6.1.4
OBJECT IDENTIFIER

enterprises		1.3.6.1.4.1
OBJECT IDENTIFIER

fibronics		1.3.6.1.4.1.22
OBJECT IDENTIFIER

mibs		1.3.6.1.4.1.22.101
OBJECT IDENTIFIER

mibseth-rptrs		1.3.6.1.4.1.22.101.8
OBJECT IDENTIFIER

xrptrinfo		1.3.6.1.4.1.22.101.8.1
OBJECT IDENTIFIER

xrptrgroup		1.3.6.1.4.1.22.101.8.2
OBJECT IDENTIFIER

xrptrgroupport		1.3.6.1.4.1.22.101.8.3
OBJECT IDENTIFIER

xrptrgroupmodule		1.3.6.1.4.1.22.101.8.4
OBJECT IDENTIFIER

xrptrRxDscrptrOverFlows		1.3.6.1.4.1.22.101.8.1.1
This counter reflects the number of the missed received packets due to lack of resources such as descriptors or memory buffers
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

xrptrTxDscrptrOverFlows		1.3.6.1.4.1.22.101.8.1.2
This counter is incremented every time there is a transmit overflow
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

xrptrMemoryErrors		1.3.6.1.4.1.22.101.8.1.3
This counter is incremented every time there is a memory error
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

xrptrJabbers		1.3.6.1.4.1.22.101.8.1.4
This counter is incremented every time there is a jabber in one of the ports.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

xrptrNMSPort		1.3.6.1.4.1.22.101.8.1.5
Returns the port number which the NMS is connected to. If an NMS is not connected to the card the value returned will be 99.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrNMSGroup		1.3.6.1.4.1.22.101.8.1.6
Returns the group number which the NMS is connected to. If the NMS is not connected to a card the value returned will be 99.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrESMPort		1.3.6.1.4.1.22.101.8.1.7
Returns the port number which the GigaHub (ESM) is connected to. If the GigaHub is not connected to the card the value returned will be 99.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrESMGroup		1.3.6.1.4.1.22.101.8.1.8
Returns the group number which the GigaHub (ESM) is connected to. If the GigaHub is not connected to a card the value returned will be 99.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrSmCpuError		1.3.6.1.4.1.22.101.8.1.9
CPU Fault status. If the value is fault-exist(1) - there is a CPU fault in the repeater manager card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fault-exist(1), no-fault-exist(2)

xrptrSmControllerError		1.3.6.1.4.1.22.101.8.1.10
Controller Fault status. If the value is fault-exist(1) - there is a fault in the Ethernet control block of the repeater manager card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fault-exist(1), no-fault-exist(2)

xrptrGroupTable		1.3.6.1.4.1.22.101.8.2.1
Table of entries with global information on each group. Information or error may stem from one single port in group, but is displayed as group info/error.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		XrptrGroupEntry

xrptrGroupEntry		1.3.6.1.4.1.22.101.8.2.1.1
Entry per group containing info/errors on the group.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	XrptrGroupEntry

xrptrGroupIndex		1.3.6.1.4.1.22.101.8.2.1.1.1
Group Number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupGlobalStatus		1.3.6.1.4.1.22.101.8.2.1.1.2
8 bytes. 60 status bits of the card. For more information about the meaning of the status, read the specific user manual of each card. The channel leds are encoded into 2 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

xrptrGroupPrevStatus		1.3.6.1.4.1.22.101.8.2.1.1.3
8 bytes. Previous 60 status bits of the card. This object id is used mainly for traps (see Card Trap)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

xrptrGroupGlobalError		1.3.6.1.4.1.22.101.8.2.1.1.4
Group Global Fault status. If the value is fault-exist(1) - there is a fault in the card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fault-exist(1), no-fault-exist(2)

xrptrGroupJabberError		1.3.6.1.4.1.22.101.8.2.1.1.5
Jabber Fault status. If the value is fault-exist(1) - there is a jabber event.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fault-exist(1), no-fault-exist(2)

xrptrGroupRepeaterCpuBlockError		1.3.6.1.4.1.22.101.8.2.1.1.8
Repeater Block Fault status. If the value is fault-exist(1) - there is a fault in the repeater block or cpu block of the repeater card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fault-exist(1), no-fault-exist(2)

xrptrGroupAutoPartition		1.3.6.1.4.1.22.101.8.2.1.1.9
Group Auto partition Fault status. If the value is fault-exist(1) - at least one of the ports is in auto-partition.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fault-exist(1), no-fault-exist(2)

xrptrGroupDetachStatus		1.3.6.1.4.1.22.101.8.2.1.1.10
Global Detach status. If the value is fault-exist(1) - at least one of the ports is detached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	detach-exist(1), no-detach-exist(2)

xrptrGroupGlobalCommandCode		1.3.6.1.4.1.22.101.8.2.1.1.11
Enable the user to attach/detach all repeater ports. Note: in case of detach command - all ports will detach except the port on which the last NMS message was received. When reading this object the value returned is always attach-all-ports(1)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	attach-all-ports(1), detach-all-ports(2)

xrptrGroupTrapMask		1.3.6.1.4.1.22.101.8.2.1.1.12
If this variable is set to mask-info(4) all traps will be sent. If this variable is set to mask-warn(3) only traps with severity WARN or FATAL will be sent. If this variable is set to mask-fatal(2) only traps with severity FATAL will be sent. If this variable is set to mask-all(1) then no traps will be sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	mask-all(1), mask-fatal(2), mask-warn(3), mask-info(4)

xrptrGroupLinkSelectHead1		1.3.6.1.4.1.22.101.8.2.1.1.13
Enable the user to switch between MAIN and SECOND link only in Head module in the 342 type cards.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	toggle-link-select(1)

xrptrGroupBackupHead1State		1.3.6.1.4.1.22.101.8.2.1.1.14
Allow the user to enable or disable the backup port for Head module only in 342 cards. When set to primary(1) the active port will be the primary port, when set to secondary(2) the active port will be the secondary port and when set to normal(3) the active port will be set by the backup algorithm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	primary(1), secondary(2), normal(3), not-applicable(4)

xrptrGroupMaxModuleNumber		1.3.6.1.4.1.22.101.8.2.1.1.15
Maximum Number of modules in a group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupSlotNumber		1.3.6.1.4.1.22.101.8.2.1.1.16
Physical slot index of the group
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupSlotInternalIndex		1.3.6.1.4.1.22.101.8.2.1.1.17
Internal index of the group within its slot
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupFaultTable		1.3.6.1.4.1.22.101.8.2.2
Table of fault reports per group.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		XrptrGroupFaultEntry

xrptrGroupFaultEntry		1.3.6.1.4.1.22.101.8.2.2.1
Entry of fault information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	XrptrGroupFaultEntry

xrptrGroupGroupIndex		1.3.6.1.4.1.22.101.8.2.2.1.1
Group Number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupFaultIndex		1.3.6.1.4.1.22.101.8.2.2.1.2
The fault index in the fault table
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupFaultReport		1.3.6.1.4.1.22.101.8.2.2.1.3
Get the faults detected by the agent
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

xrptrGroupPortTable		1.3.6.1.4.1.22.101.8.3.1
Table of entries with information/errors per port in group.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		XrptrGroupPortEntry

xrptrGroupPortEntry		1.3.6.1.4.1.22.101.8.3.1.1
Entry per port with info/errors.
Status: mandatory	Access: read-write
OBJECT-TYPE
	XrptrGroupPortEntry

xrptrGroupPIndex		1.3.6.1.4.1.22.101.8.3.1.1.1
Group Number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupPortIndex		1.3.6.1.4.1.22.101.8.3.1.1.2
Port Number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupPortLinkStatus		1.3.6.1.4.1.22.101.8.3.1.1.3
When the value is 1, link status is O.K.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	link-ok(1), link-not-ok(2), link-not-applicable(3)

xrptrGroupPortRcvStatus		1.3.6.1.4.1.22.101.8.3.1.1.4
This object describes the receive status of the port, When a port is receiving data the object's value is receive(1); when the port does not receive any data the object's value is no-receive(2)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	receive(1), no-receive(2)

xrptrGroupPortLinkFaults		1.3.6.1.4.1.22.101.8.3.1.1.5
This counter is incremented every time a link change is detected in the port. A link change occurs whenever the link either goes down or comes up on the port
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

xrptrGroupPortAutoPartitions		1.3.6.1.4.1.22.101.8.3.1.1.6
This counter is incremented every time the port enters the Auto Partition state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

xrptrGroupPortAutoPartitionType		1.3.6.1.4.1.22.101.8.3.1.1.7
Auto Partition type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	collision-limit(1), collision-length-limit(2), loopback-failure(3), cpu-forced-reconnection(4), none(5)

xrptrGroupRPortProtectTable		1.3.6.1.4.1.22.101.8.3.2
Table of entries regarding status of port protect. One entry per port, with runtime status. Setting these objects will prevent detach of port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		XrptrGroupRPortProtectEntry

xrptrGroupRPortProtectEntry		1.3.6.1.4.1.22.101.8.3.2.1
Entry regarding port runtime protect status.
Status: mandatory	Access: read-write
OBJECT-TYPE
	XrptrGroupRPortProtectEntry

xrptrGroupRPortProtectGrIndex		1.3.6.1.4.1.22.101.8.3.2.1.1
Group Number
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xrptrGroupRPortProtectPortIndex		1.3.6.1.4.1.22.101.8.3.2.1.2
Port Number
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xrptrGroupRPortProtectPortState		1.3.6.1.4.1.22.101.8.3.2.1.3
State of port protection. If port is protected, a detach command to this port is rejected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	protected(1), not-protected(2)

xrptrGroupPPortProtectTable		1.3.6.1.4.1.22.101.8.3.3
Table of entries regarding status of port protect. One entry per port, with permanent status. Set on these objects will prevent detach of port. Value is saved permanently.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		XrptrGroupPPortProtectEntry

xrptrGroupPPortProtectEntry		1.3.6.1.4.1.22.101.8.3.3.1
Entry regarding port permanent protect status.
Status: mandatory	Access: read-write
OBJECT-TYPE
	XrptrGroupPPortProtectEntry

xrptrGroupPPortProtectGrIndex		1.3.6.1.4.1.22.101.8.3.3.1.1
Group Number
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xrptrGroupPPortProtectPortIndex		1.3.6.1.4.1.22.101.8.3.3.1.2
Port Number
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

xrptrGroupPPortProtectPortState		1.3.6.1.4.1.22.101.8.3.3.1.3
State of port protection. If port is protected, a detach command to this port is rejected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	protected(1), not-protected(2)

xrptrGroupModuleTable		1.3.6.1.4.1.22.101.8.4.1
Table of entries regarding port modules in group.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		XrptrGroupModuleEntry

xrptrGroupModuleEntry		1.3.6.1.4.1.22.101.8.4.1.1
Entry per group, per module, describing module.
Status: mandatory	Access: read-write
OBJECT-TYPE
	XrptrGroupModuleEntry

xrptrGroupMIndex		1.3.6.1.4.1.22.101.8.4.1.1.1
Group Number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupModuleIndex		1.3.6.1.4.1.22.101.8.4.1.1.2
Module Number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

xrptrGroupModuleStructInfo		1.3.6.1.4.1.22.101.8.4.1.1.3
List of module numbers: em350 /* BLANK / em351 / FO single port / em352 / FO dual port / em353 / COAX single port / em354 / COAX dual port / em357 / DTE / em356 / 10BASET dual port / em359 / AUI / em355 / EB2 */
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	em350-Blank(1), em351-FO1(2), em352-FO2(3), em353-CX1(4), em354-CX2(5), em357-DTE(8), em356-TP2(9), em359-AUI(10), other(11), em355-EB2(12)

xrptrGroupModuleBackupState		1.3.6.1.4.1.22.101.8.4.1.1.4
Enable the user to specify the backup state (enable/disable) for appropriate EM modules (e.g., em352 FO dual port) installed in an LC348 card. This object applies only to the 348 card. Setting this object will take effect only after the next reset or power up of the card.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

xrptrGroupPortStatus		1
Issued when a port changes its status
TRAP-TYPE

xrptrGroupJabberFaultStatus		2
Issued when a port enters the jabber lock state
TRAP-TYPE

xrptrGroupCPUBlockFaultStatus		3
Issued when a CPU or block error is detected
TRAP-TYPE

xrptrGrpPortAutoPartitionStatus		4
Issued when a port is auto partitioned
TRAP-TYPE

xrptrGroupPortLinkStatus		6
Issued when the link status of a port changes
TRAP-TYPE

xrptrDetachNmsPort		7
Issued when the port connected to the NMS is not detached by a detach command received from the NMS
TRAP-TYPE

xrptrGrpHead1BackupMainActive		8
Indicates that the MAIN link is active
TRAP-TYPE

xrptrGrpHead1BackupSecondActive		9
Indicates that the SECOND link is active
TRAP-TYPE

xrptrDetachEsm		10
Issued when the port connected to the ESM is not detached by a detach command received from the NMS
TRAP-TYPE

xrptrDetachProtectPort		11
Issued when a protected port is not detached by a detach command received from the NMS
TRAP-TYPE

xrptrSmCpufaultStatus		12
Issued when a CPU fault is detected in manager card. For factory use only.
TRAP-TYPE

xrptrSmControllerFaultStatus		13
Issued when a Controller fault is detected in manager card. For factory use only
TRAP-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor