HYTERA-REPEATER-MIB

File: HYTERA-REPEATER-MIB.mib (50192 bytes)

Imported modules

Imported symbols

private	enterprises	IpAddress
Counter	Gauge	TimeTicks
OBJECT-TYPE

Defined Types

ChannelParaEntry
SEQUENCE
	channelParaIndex	INTEGER
	actChannelAlias	OCTET STRING
	actChannelType	INTEGER
	actTxPower	INTEGER
	actChannelNo	INTEGER
	actChannelSubNo	INTEGER

LogEntry
SEQUENCE
	logIndex	INTEGER
	alarmName	INTEGER
	alarmStatus	INTEGER
	logTime	INTEGER

MultiCTCCDCEntry
SEQUENCE
	ctcssIndex	INTEGER
	txCtcssFrequency	INTEGER
	txCtcssType	INTEGER
	rxCtcssFrequency	INTEGER
	rxCtcssType	INTEGER

DigitalChnEntry
SEQUENCE
	digitalChnIndex	INTEGER
	digitalColorCode	INTEGER
	digitalIpMultisiteConnect	INTEGER
	digitalReceiveFrequency	INTEGER
	digitalTransmitFrequency	INTEGER
	digitalTxContactName	INTEGER

AnalogChnEntry
SEQUENCE
	analogChnIndex	INTEGER
	analogCarrierSquelchLevel	INTEGER
	analogMultiCtcCdc	INTEGER
	analogPreEmp	INTEGER
	analogScrambler	INTEGER
	analogFlatAudio	INTEGER
	analogReceiveFrequency	INTEGER
	analogRxCtcCdcType	INTEGER
	analogRxCtcss	INTEGER
	analogRxCdcss	INTEGER
	analogTransmitFrequency	INTEGER
	analogTxCtcCdcType	INTEGER
	analogTxCtcss	INTEGER
	analogTxCdcss	INTEGER

MixedChnEntry
SEQUENCE
	mixedChnIndex	INTEGER
	mixedCarrierSquelchLevel	INTEGER
	mixedTxContactName	INTEGER
	mixedIpMultisiteConnect	INTEGER
	mixedColorCode	INTEGER
	mixedTxChannelType	INTEGER
	mixedPreEmp	INTEGER
	mixedScrambler	INTEGER
	mixedFlatAudio	INTEGER
	mixedMultiCtcCdc	INTEGER
	mixedReceiveFrequency	INTEGER
	mixedRxCtcCdcType	INTEGER
	mixedRxCtcss	INTEGER
	mixedRxCdcss	INTEGER
	mixedTransmitFrequency	INTEGER
	mixedTxCtcCdcType	INTEGER
	mixedTxCtcss	INTEGER
	mixedTxCdcss	INTEGER

MultisiteAccessManageEntry
SEQUENCE
	multisiteAccessManageIndex	INTEGER
	multisiteStartId	INTEGER
	multisiteIdLength	INTEGER
	multisiteAccessCallType	INTEGER

ContactEntry
SEQUENCE
	contactIndex	INTEGER
	callAlias	OCTET STRING
	contactCallType	INTEGER
	callId	INTEGER

AccessManageEntry
SEQUENCE
	accessManageIndex	INTEGER
	startId	INTEGER
	idLength	INTEGER

Defined Values

hyteraRepeaterMIB		1.3.6.1.4.1.40297
OBJECT IDENTIFIER

product		1.3.6.1.4.1.40297.1
OBJECT IDENTIFIER

repeater		1.3.6.1.4.1.40297.1.2
OBJECT IDENTIFIER

rptRealTimeInfo		1.3.6.1.4.1.40297.1.2.1
OBJECT IDENTIFIER

rptControl		1.3.6.1.4.1.40297.1.2.2
OBJECT IDENTIFIER

rptLog		1.3.6.1.4.1.40297.1.2.3
OBJECT IDENTIFIER

rptSystemInfo		1.3.6.1.4.1.40297.1.2.4
OBJECT IDENTIFIER

rptConfiguration		1.3.6.1.4.1.40297.1.2.5
OBJECT IDENTIFIER

rptAlarmInfo		1.3.6.1.4.1.40297.1.2.1.1
OBJECT IDENTIFIER

rptVoltageAlarm		1.3.6.1.4.1.40297.1.2.1.1.1
The voltage alarm. normal(0), low voltage alarm(1), high voltage alarm(2), abnormal(3). The abnormal condition is used for RD960. For the RD960 do not distinguish low voltage alarm and high voltage alarm, we use abnormal to replace them.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2

rptTemperatureAlarm		1.3.6.1.4.1.40297.1.2.1.1.2
The temperature alarm. normal(0), low temperature alarm(1), high temperature alarm(2).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2

rptFanAlarm		1.3.6.1.4.1.40297.1.2.1.1.3
The fan alarm. normal(0), alarm(1). The object is not supported yet.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	0..1

rptForwardAlarm		1.3.6.1.4.1.40297.1.2.1.1.4
The forward power alarm. undefined(-1), normal(0), alarm(1). The object is not supported yet.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	-1..1

rptReflectedAlarm		1.3.6.1.4.1.40297.1.2.1.1.5
The reflected power alarm. undefined(-1), normal(0), alarm(1). The object is not supported yet.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	-1..1

rptVswrAlarm		1.3.6.1.4.1.40297.1.2.1.1.6
The voltage standing wave radio alarm. normal(0), alarm(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..1

rptTxPllAlarm		1.3.6.1.4.1.40297.1.2.1.1.7
The transmitting PLL alarm. normal(0), alarm(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..1

rptRxPllAlarm		1.3.6.1.4.1.40297.1.2.1.1.8
The receiving PLL alarm. normal(0), alarm(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..1

rptBatteryVoltageAlarm		1.3.6.1.4.1.40297.1.2.1.1.9
The battery voltage alarm. normal(0), abnormal(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2

rptDataInfo		1.3.6.1.4.1.40297.1.2.1.2
OBJECT IDENTIFIER

rptVoltage		1.3.6.1.4.1.40297.1.2.1.2.1
The voltage. It should be changed to float format. If the repeater is rd620 and rd960, the value is invalid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

rptPaTemprature		1.3.6.1.4.1.40297.1.2.1.2.2
The temperature. It should be changed to float format. The value is invalid, if the repeater is rd960.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

rptFanSpeed		1.3.6.1.4.1.40297.1.2.1.2.3
The fan speed. The object is not supported yet.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER

rptVswr		1.3.6.1.4.1.40297.1.2.1.2.4
The VSWR. It should be changed to float format.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

rptTxFwdPower		1.3.6.1.4.1.40297.1.2.1.2.5
The forward power. It should be changed to float format. The value is invalid, if the repeater is rd960 or rd620.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

rptTxRefPower		1.3.6.1.4.1.40297.1.2.1.2.6
The reflected power. It should be changed to float format. The value is invalid, if the repeater is rd960 or rd620.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

rptDataInfoBak1		1.3.6.1.4.1.40297.1.2.1.2.7
The backup object. The object is not supported yet.
Status: optional	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

rptDataInfoBak2		1.3.6.1.4.1.40297.1.2.1.2.8
The backup object. The object is not supported yet.
Status: optional	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

rptSlot1Rssi		1.3.6.1.4.1.40297.1.2.1.2.9
The RSSI value of slot1. unit: dB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rptSlot2Rssi		1.3.6.1.4.1.40297.1.2.1.2.10
The RSSI value of slot2. unit: dB. The value is valid only in digital model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rptSupplyPowerType		1.3.6.1.4.1.40297.1.2.1.2.11
The type of power. DC(0), Battery(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rptBatteryConnect		1.3.6.1.4.1.40297.1.2.1.2.12
The battery connecting condition. disconnected(0), connected(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rptBatteryVoltage		1.3.6.1.4.1.40297.1.2.1.2.13
The battery voltage. The object is not supported yet.
Status: optional	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

rptRestart		1.3.6.1.4.1.40297.1.2.2.1
Restart the repeater. do nothing(0), reset(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

rptChannelNumber		1.3.6.1.4.1.40297.1.2.2.2
The current channel number in the zone.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..15

rptChannelType		1.3.6.1.4.1.40297.1.2.2.3
The current channel type. digital(0), analog(1), mixed(2).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2

rptControlObjBak1		1.3.6.1.4.1.40297.1.2.2.4
The backup object. The object is not supported yet.
Status: optional	Access: read-only
OBJECT-TYPE
	INTEGER	0..1

rptTxPowerLevel		1.3.6.1.4.1.40297.1.2.2.5
The transmit power level. high(0), low(2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 2

rptKnockdown		1.3.6.1.4.1.40297.1.2.2.6
The status of repeating. repeating(0), knockdown(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

rptRadioState		1.3.6.1.4.1.40297.1.2.2.7
The status of the repeater's normal function. enable(0), disable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

rptSnmpTrapIp		1.3.6.1.4.1.40297.1.2.2.8
The SNMP trapping IP address. The default value is 230.37.0.0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rptSnmpTrapPort		1.3.6.1.4.1.40297.1.2.2.9
The SNMP trapping port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	162

rptchannelParaTable		1.3.6.1.4.1.40297.1.2.2.10
The table of channel's parameters relevant to the repeater's channels.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChannelParaEntry

channelParaEntry		1.3.6.1.4.1.40297.1.2.2.10.1
The channel's parameters for one of the repeater's channels.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ChannelParaEntry

channelParaIndex		1.3.6.1.4.1.40297.1.2.2.10.1.1
The index of the table which uniquely identifies the channel's parameters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

actChannelAlias		1.3.6.1.4.1.40297.1.2.2.10.1.2
The channel alias. It is an unicode string
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(32)

actChannelType		1.3.6.1.4.1.40297.1.2.2.10.1.3
The channel type. digital(0), analog(1), mixed(2).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

actTxPower		1.3.6.1.4.1.40297.1.2.2.10.1.4
The transmit power level. high(0), low(2).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

actChannelNo		1.3.6.1.4.1.40297.1.2.2.10.1.5
The channel number in the repeater's zone.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

actChannelSubNo		1.3.6.1.4.1.40297.1.2.2.10.1.6
The channel number in the group of same type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rptForbid		1.3.6.1.4.1.40297.1.2.2.11
The status of the repeater's all function. nomal(0), forbid(1). If the repeater is forbided, you can only wake up it by setting the rptRadioStatus object to 0 in local RDAC model.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

logTable		1.3.6.1.4.1.40297.1.2.3.1
The table of alarm records.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LogEntry

logEntry		1.3.6.1.4.1.40297.1.2.3.1.1
The record's content.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	LogEntry

logIndex		1.3.6.1.4.1.40297.1.2.3.1.1.1
The index of the table which uniquely identifies the alram record.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

alarmName		1.3.6.1.4.1.40297.1.2.3.1.1.2
The alarm name. temperature alarm(0), fan alarm(1), vswr alarm(2), low forward power alarm(3), low voltage alarm(4), high voltage alarm(5), tx unlock alarm(6), rx unlock alarm(7), battery voltage alarm(8), invalid(65535).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..9 \| 65535

alarmStatus		1.3.6.1.4.1.40297.1.2.3.1.1.3
The alarm status. alarm recove(0), alarm happen(1), invalid(65535).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..1 \| 65535

logTime		1.3.6.1.4.1.40297.1.2.3.1.1.4
The alarm time. unit: second. The time is the time lapsed since the repeater starting up. If the value is -1, the record is invalid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-1..134217728

clearLog		1.3.6.1.4.1.40297.1.2.3.2
Clear the log. do nothing(0), clear log(0).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

recordCount		1.3.6.1.4.1.40297.1.2.3.3
The number of records.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

latestRecordPosition		1.3.6.1.4.1.40297.1.2.3.4
The row number of the latest record. If the value is 0, there is no valid record in the table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

rptModelName		1.3.6.1.4.1.40297.1.2.4.1
The model name. It is an unicode string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

rptModelNo		1.3.6.1.4.1.40297.1.2.4.2
The model number. It is an unicode string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

rptFirmwareVersion		1.3.6.1.4.1.40297.1.2.4.3
The firmware version. It is an unicode string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

rptRcdbVersion		1.3.6.1.4.1.40297.1.2.4.4
The RCDB version. It is an unicode string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

rptSerialNo		1.3.6.1.4.1.40297.1.2.4.5
The serial number. It is an unicode string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

rptRadioAlias		1.3.6.1.4.1.40297.1.2.4.6
The repeater alias. It is an unicode string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

rptRadioID		1.3.6.1.4.1.40297.1.2.4.7
The ID of the repeater.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rptCurChannelType		1.3.6.1.4.1.40297.1.2.4.8
The type of the wroking channel. digital(0), analog(1), mixed(2).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..2

rptChannelName		1.3.6.1.4.1.40297.1.2.4.9
The name of the current channel. It is an unicode string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(32)

rptCurTxFreq		1.3.6.1.4.1.40297.1.2.4.10
The current transmitting frequency. unit: Hz.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	100000000..550000000

rptCurRxFreq		1.3.6.1.4.1.40297.1.2.4.11
The current receiving frequency. unit: Hz.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	100000000..550000000

rptWorkState		1.3.6.1.4.1.40297.1.2.4.12
The work status of the repeater. receive(0), transmit(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rptCurZoneAlias		1.3.6.1.4.1.40297.1.2.4.13
The alias of the current zone. It is an unicode string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(32)

rptBasicSetting		1.3.6.1.4.1.40297.1.2.5.1
OBJECT IDENTIFIER

powerOn		1.3.6.1.4.1.40297.1.2.5.1.1
OBJECT IDENTIFIER

designatedPowerOnChn		1.3.6.1.4.1.40297.1.2.5.1.1.1
Designate the power on channel. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

powerOnChannelNo		1.3.6.1.4.1.40297.1.2.5.1.1.2
The the power on channel number. invalid(65535).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..15 \| 65535

microphone		1.3.6.1.4.1.40297.1.2.5.1.2
OBJECT IDENTIFIER

internalMicGain		1.3.6.1.4.1.40297.1.2.5.1.2.1
The gain of the internal microphone. It is double of the real value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	4..36

externalMicGain		1.3.6.1.4.1.40297.1.2.5.1.2.2
The gain of the external microphone. It is double of the real value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	4..36

multiCTCCDCTable		1.3.6.1.4.1.40297.1.2.5.1.3
The table of subaudio frequency.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MultiCTCCDCEntry

multiCTCCDCEntry		1.3.6.1.4.1.40297.1.2.5.1.3.1
The subaudio frequency.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MultiCTCCDCEntry

ctcssIndex		1.3.6.1.4.1.40297.1.2.5.1.3.1.1
The index of the table which uniquely identifies the subaudio frequency.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

txCtcssFrequency		1.3.6.1.4.1.40297.1.2.5.1.3.1.2
The transmitting subaudio frequency. The value is limitted to the range. The range is changed with the type: 0 (txCtcssType: none) 19~492 (txCtcssType: CDCSS or CDCSS invert) 670~2541 (txCtcssType: CTCSS) The value is 10 times of the real value when the type is CTCSS. The value in first row is unable to be set. It's not able to be set, unless the rxCtcssType in the same row is not none. It will be set to the matched minimum available value automatically, when the txCtcssType in the same row is changed.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 19..492 \| 670..2541

txCtcssType		1.3.6.1.4.1.40297.1.2.5.1.3.1.3
The type of the transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). The value in first row is unable to be set. It's not able to be set, unless the rxCtcssType in the same row is not none.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

rxCtcssFrequency		1.3.6.1.4.1.40297.1.2.5.1.3.1.4
The receiving subaudio frequency. The value is limitted to the range and is not allowed to duplicate but 0. The range is changed with the type:0 0 (rxCtcssType: none) 19~492 (rxCtcssType: CDCSS or CDCSS invert) 670~2541 (rxCtcssType: CTCSS) The value is 10 times of the real value when the type is CTCSS. The value in first row is unable to be set. It will be set to the matched minimum available value automatically, when the rxCtcssType in the same row is changed.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 19..492 \| 670..2541

rxCtcssType		1.3.6.1.4.1.40297.1.2.5.1.3.1.5
The type of the receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3). It must be set according to line sequence. The value in first row is unable to be set.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

audioPriority		1.3.6.1.4.1.40297.1.2.5.1.4
OBJECT IDENTIFIER

pathPriority		1.3.6.1.4.1.40297.1.2.5.1.4.1
The transmit path priority. PTT request(0), repeat request(1), first come first send(2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

pttPriority		1.3.6.1.4.1.40297.1.2.5.1.4.2
The PTT priority. external PTT(0), front PTT(1), remote PTT(2), first come first send(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

jitterBufferLenth		1.3.6.1.4.1.40297.1.2.5.1.5
The jitter buffer length.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..8

analogCallHangTime		1.3.6.1.4.1.40297.1.2.5.1.6
The analog call hang time. unit: second.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..70

repeatRequestPriority		1.3.6.1.4.1.40297.1.2.5.1.7
The repeat request priority. local repeating(0), IP connect repeating(1), first come first send(2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

rptDigitalChannelSetting		1.3.6.1.4.1.40297.1.2.5.2
OBJECT IDENTIFIER

digitalChnTable		1.3.6.1.4.1.40297.1.2.5.2.1
The table of digital channel's configuration parameters relevant to the repeater's digital channels.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DigitalChnEntry

digitalChnEntry		1.3.6.1.4.1.40297.1.2.5.2.1.1
The digital channel's configuration parameters for one of the repeater's digital channels.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DigitalChnEntry

digitalChnIndex		1.3.6.1.4.1.40297.1.2.5.2.1.1.1
The index of the table which uniquely identifies the digital channel's parameter. It also represents the channel number which is counted from 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

digitalColorCode		1.3.6.1.4.1.40297.1.2.5.2.1.1.2
The color code.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..15

digitalIpMultisiteConnect		1.3.6.1.4.1.40297.1.2.5.2.1.1.3
The multisite connecting based on network. None(0), slot1(1), slot2(2), slot1&slot2(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

digitalReceiveFrequency		1.3.6.1.4.1.40297.1.2.5.2.1.1.4
The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100000000..550000000

digitalTransmitFrequency		1.3.6.1.4.1.40297.1.2.5.2.1.1.5
The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100000000..550000000

digitalTxContactName		1.3.6.1.4.1.40297.1.2.5.2.1.1.6
The row number of transmitting contact name. none(0), row number(1~512). The value is limmited by the number of rows in contact table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..512

rptAnalogChannelSetting		1.3.6.1.4.1.40297.1.2.5.3
OBJECT IDENTIFIER

analogChnTable		1.3.6.1.4.1.40297.1.2.5.3.1
The table of analog channel's configuration parameters relevant to the repeater's analog channels.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AnalogChnEntry

analogChnEntry		1.3.6.1.4.1.40297.1.2.5.3.1.1
The analog channel's configuration parameters for one of the repeater's analog channels.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AnalogChnEntry

analogChnIndex		1.3.6.1.4.1.40297.1.2.5.3.1.1.1
The index of the table which uniquely identifies the analog channel's parameters. It also represents the channel number which is counted from 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

analogCarrierSquelchLevel		1.3.6.1.4.1.40297.1.2.5.3.1.1.2
The carrier squelch level. open(0), normal(1), tight(2)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

analogMultiCtcCdc		1.3.6.1.4.1.40297.1.2.5.3.1.1.3
The multiCtcCdc control. disable(0), enable(1). It can't be set to enable until the analogRxCtcCdcType is not 0 and there is some valid data is multiCTCCDCTable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

analogPreEmp		1.3.6.1.4.1.40297.1.2.5.3.1.1.4
The pre-emphasis control. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

analogScrambler		1.3.6.1.4.1.40297.1.2.5.3.1.1.5
The scrambler control. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

analogFlatAudio		1.3.6.1.4.1.40297.1.2.5.3.1.1.6
The flat audio control. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

analogReceiveFrequency		1.3.6.1.4.1.40297.1.2.5.3.1.1.7
The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100000000..550000000

analogRxCtcCdcType		1.3.6.1.4.1.40297.1.2.5.3.1.1.8
The type of receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

analogRxCtcss		1.3.6.1.4.1.40297.1.2.5.3.1.1.9
The value of receiving CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	670..2541 \| 65535

analogRxCdcss		1.3.6.1.4.1.40297.1.2.5.3.1.1.10
The value of receiving CDCSS. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	19..492 \| 65535

analogTransmitFrequency		1.3.6.1.4.1.40297.1.2.5.3.1.1.11
The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100000000..550000000

analogTxCtcCdcType		1.3.6.1.4.1.40297.1.2.5.3.1.1.12
The type of transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

analogTxCtcss		1.3.6.1.4.1.40297.1.2.5.3.1.1.13
The value of transmitting CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is limited by analogTxCtcCdcType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	670..2541 \| 65535

analogTxCdcss		1.3.6.1.4.1.40297.1.2.5.3.1.1.14
The value of transmitting CDCSS. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	19..492 \| 65535

rptMixedChannelSetting		1.3.6.1.4.1.40297.1.2.5.4
OBJECT IDENTIFIER

mixedChnTable		1.3.6.1.4.1.40297.1.2.5.4.1
The table of mixed channel's configuration parameters relevant to the repeater's mixed channels.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MixedChnEntry

mixedChnEntry		1.3.6.1.4.1.40297.1.2.5.4.1.1
The mixed channel's configuration parameters for one of the repeater's mixed channels.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MixedChnEntry

mixedChnIndex		1.3.6.1.4.1.40297.1.2.5.4.1.1.1
The index of the table which uniquely identifies the mixed channel's parameters. It also represents the channel number which is counted from 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

mixedCarrierSquelchLevel		1.3.6.1.4.1.40297.1.2.5.4.1.1.2
The carrier squelch level control. open(0), normal(1), tight(2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

mixedTxContactName		1.3.6.1.4.1.40297.1.2.5.4.1.1.3
The row number of transmitting contact name. none(0), row number(1~512). The value is limited to the numbers of row in the contact table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..512

mixedIpMultisiteConnect		1.3.6.1.4.1.40297.1.2.5.4.1.1.4
The multisite connecting based on network. none(0), slot1(1), slot 2(2), slot1&slot2(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

mixedColorCode		1.3.6.1.4.1.40297.1.2.5.4.1.1.5
The color code.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..15

mixedTxChannelType		1.3.6.1.4.1.40297.1.2.5.4.1.1.6
The type of transmitting channel. digital(0), analog(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

mixedPreEmp		1.3.6.1.4.1.40297.1.2.5.4.1.1.7
The pre-emphasis control. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

mixedScrambler		1.3.6.1.4.1.40297.1.2.5.4.1.1.8
The scrambler control. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

mixedFlatAudio		1.3.6.1.4.1.40297.1.2.5.4.1.1.9
The flat audio control. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

mixedMultiCtcCdc		1.3.6.1.4.1.40297.1.2.5.4.1.1.10
The multiCtcCdc control. disable(0), enable(1). It can't be set to enable until the mixedRxCtcCdcType is not 0 and there is some valid data in multiCTCCDC Table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

mixedReceiveFrequency		1.3.6.1.4.1.40297.1.2.5.4.1.1.11
The receiving frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100000000..550000000

mixedRxCtcCdcType		1.3.6.1.4.1.40297.1.2.5.4.1.1.12
The type of receiving subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

mixedRxCtcss		1.3.6.1.4.1.40297.1.2.5.4.1.1.13
The value of receiving CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	670..2541 \| 65535

mixedRxCdcss		1.3.6.1.4.1.40297.1.2.5.4.1.1.14
The value of receiving CDCSS. 65535 is an invalid value. The value is restricted by analogRxCtcCdcType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	19..492 \| 65535

mixedTransmitFrequency		1.3.6.1.4.1.40297.1.2.5.4.1.1.15
The transmitting frequency. unit: Hz. The value is limitted by the assigned frequency range and the last digit should be 0 or 5.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100000000..550000000

mixedTxCtcCdcType		1.3.6.1.4.1.40297.1.2.5.4.1.1.16
The type of transmitting subaudio frequency. none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..3

mixedTxCtcss		1.3.6.1.4.1.40297.1.2.5.4.1.1.17
The value of transmitting CTCSS. It's 10 times of the real value. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	670..2541 \| 65535

mixedTxCdcss		1.3.6.1.4.1.40297.1.2.5.4.1.1.18
The value of transmitting CDCSS. 65535 is an invalid value. The value is restricted by analogTxCtcCdcType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	19..492 \| 65535

rptServiceSetting		1.3.6.1.4.1.40297.1.2.5.5
OBJECT IDENTIFIER

groupCallHangTime		1.3.6.1.4.1.40297.1.2.5.5.1
The group call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..60

privateCallHangTime		1.3.6.1.4.1.40297.1.2.5.5.2
The private call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..60

emergencyCallHangTime		1.3.6.1.4.1.40297.1.2.5.5.3
The emergency call hang time. unit: second. The value is 2 times of the real value and should not be greater than the value of sit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..60

sit		1.3.6.1.4.1.40297.1.2.5.5.4
The sit. unit: second. transmit always(0), the value of sit(2~120). The value is 2 times of the real value and should not be less than groupCallHangTime, privateCallHangTime and emergencyCallHangTime.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 2..120

txPreambleDuration		1.3.6.1.4.1.40297.1.2.5.5.5
The preamble duration. unit: milisecond. The value is 1/60 times of the real value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..144

beaconTxMode		1.3.6.1.4.1.40297.1.2.5.5.6
The beacon transmit mode. local(0), network(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

beaconDuration		1.3.6.1.4.1.40297.1.2.5.5.7
The beacon duration. unit: milisecond. disable(0), beacon duration(4~150). The value is 1/120 times of the real value
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0 \| 4..150

beaconInterval		1.3.6.1.4.1.40297.1.2.5.5.8
The beacon interval. unit: second.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	10..600

multisiteAccessManagement		1.3.6.1.4.1.40297.1.2.5.5.9
The multisite access management control. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

accessManagement		1.3.6.1.4.1.40297.1.2.5.5.10
The access management control. disable(0), enable(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1

multisiteAccessManageTable		1.3.6.1.4.1.40297.1.2.5.5.11
The table of multisite access management's parameters relevant to the multisite access management.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MultisiteAccessManageEntry

multisiteAccessManageEntry		1.3.6.1.4.1.40297.1.2.5.5.11.1
The multisite management parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MultisiteAccessManageEntry

multisiteAccessManageIndex		1.3.6.1.4.1.40297.1.2.5.5.11.1.1
The index of the table which uniquely identifies the multisite access management's parameters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..32

multisiteStartId		1.3.6.1.4.1.40297.1.2.5.5.11.1.2
The start ID. invalid record(0), start ID(1~16776415). It can't be set until multisiteAccessManagement is enable and the previous row is set. If it is set, the matched multisiteIdLength and multisiteAccessCallType will be set to 100 and 1 automaticly.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..16776415

multisiteIdLength		1.3.6.1.4.1.40297.1.2.5.5.11.1.3
The ID length. invalid(65535), ID length(1~255). It can't be set until the multisiteAccessManagement is enable and the matched multisiteStartId is set.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..255 \| 65535

multisiteAccessCallType		1.3.6.1.4.1.40297.1.2.5.5.11.1.4
The call type. private call(0), group call(1), invalid(65535). It can't be set until multisiteAccessManagement is enable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1 \| 65535

contactTable		1.3.6.1.4.1.40297.1.2.5.5.12
The table of contacts. It is not allowed to add a new contact information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ContactEntry

contactEntry		1.3.6.1.4.1.40297.1.2.5.5.12.1
The contact information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ContactEntry

contactIndex		1.3.6.1.4.1.40297.1.2.5.5.12.1.1
The index of the table which uniquely identifies the contact information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..512

callAlias		1.3.6.1.4.1.40297.1.2.5.5.12.1.2
The call alias. It is an unicode string. The value should be exclusive.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(32)

contactCallType		1.3.6.1.4.1.40297.1.2.5.5.12.1.3
The call type. private call(0), group call(1), all call(2), invalid(65535). If the contactCallType is all call, the matched callId will be set to 16777215 automatically. The number of all call contact must be less than 2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2 \| 65535

callId		1.3.6.1.4.1.40297.1.2.5.5.12.1.4
The call ID. invalid(0), call ID(1~16776415,16777215). The callId should be exclusive in the group of same call type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..16776415 \| 16777215

accessManageTable		1.3.6.1.4.1.40297.1.2.5.5.13
The table of access management's parameters relevant to the access management.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessManageEntry

accessManageEntry		1.3.6.1.4.1.40297.1.2.5.5.13.1
The access management parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessManageEntry

accessManageIndex		1.3.6.1.4.1.40297.1.2.5.5.13.1.1
The index of the table which uniquely identifies the access management's parameters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..32

startId		1.3.6.1.4.1.40297.1.2.5.5.13.1.2
The start ID. invalid record(0), start ID(1~16776415). It can't be set until accessManagement is enable and the previous row is set. If it is set, the matched idLength will be set to 100 automaticly.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..16776415

idLength		1.3.6.1.4.1.40297.1.2.5.5.13.1.3
The ID length. invalid(65535), ID length(1~255). It can't be set until the accessManagement is enable and the matched startId is set.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..255 \| 65535

repeatTOTTime		1.3.6.1.4.1.40297.1.2.5.5.14
The repeat TOT time. unit: second. The value is 1/5 times of the real value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 3..120

rerepeatTOTTime		1.3.6.1.4.1.40297.1.2.5.5.15
The rerepeat TOT time. unit: second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..60