HUAWEI-WLAN-SECURITY-MIB

File: HUAWEI-WLAN-SECURITY-MIB.mib (69386 bytes)

Imported modules

HUAWEI-WLAN-DEVICE-MIB	HUAWEI-WLAN-MIB	HUAWEI-WLAN-RADIO-MIB
HUAWEI-WLAN-SERVICE-MIB	SNMPv2-CONF	SNMPv2-SMI
SNMPv2-TC

Imported symbols

hwApRegionIndex	hwApIndex	hwApMac
hwWlan	hwRadioID	hwWlanServiceEssSsid
hwWlanServiceStaMac	OBJECT-GROUP	MODULE-COMPLIANCE
NOTIFICATION-GROUP	IpAddress	Integer32
Unsigned32	Counter32	OBJECT-TYPE
MODULE-IDENTITY	NOTIFICATION-TYPE	MacAddress
TruthValue	RowStatus	DisplayString

Defined Types

HwWsecProfileEntry
SEQUENCE
	hwWsecProfileName	OCTET STRING
	hwWsecProfileWEPDataEncrypt	TruthValue
	hwWsecProfileWEPDefaultKeyID	Integer32
	hwWsecProfileWEPKeyMappingLength	Integer32
	hwWsecProfileAsuIpAddr	IpAddress
	hwWsecProfileCaCertFileName	OCTET STRING
	hwWsecProfileAsuCertFileName	OCTET STRING
	hwWsecProfileAcCertFileName	OCTET STRING
	hwWsecProfileAcPrvKeyFileName	OCTET STRING
	hwWsecProfileRsnaVersion	Integer32
	hwWsecProfileWapiVersion	Integer32
	hwWsecProfileRowStatus	RowStatus
	hwWsecProfileCaPfxPassword	OCTET STRING
	hwWsecProfileCaCertState	INTEGER
	hwWsecProfileAsuPfxPassword	OCTET STRING
	hwWsecProfileAsuCertState	INTEGER
	hwWsecProfileAcPfxPassword	OCTET STRING
	hwWsecProfileAcCertState	INTEGER
	hwWsecProfileKeyPfxPassword	OCTET STRING
	hwWsecProfileAsuType	INTEGER
	hwWsecProfileWpaPtkRekeySwitch	INTEGER
	hwWsecProfileWpa2PtkRekeySwitch	INTEGER
	hwWsecProfileWpaWpa2PtkRekeySwitch	INTEGER
	hwWsecProfileWpaPtkRekeyInterval	Integer32
	hwWsecProfileWpa2PtkRekeyInterval	Integer32
	hwWsecProfileWpaWpa2PtkRekeyInterval	Integer32

HwWsecWEPDefaultKeysEntry
SEQUENCE
	hwWsecWEPDefaultKeyIndex	Integer32
	hwWsecWEPDefaultKeyValue	OCTET STRING
	hwWsecWEPPassPhrase	DisplayString

HwWsecWEPKeyMappingsEntry
SEQUENCE
	hwWsecWEPKeyMappingIndex	Integer32
	hwWsecWEPKeyMappingAddress	MacAddress
	hwWsecWEPKeyMappingWEPOn	TruthValue
	hwWsecWEPKeyMappingValue	OCTET STRING
	hwWsecWEPKeyMappingStatus	RowStatus

HwWsecAuthSuitesEntry
SEQUENCE
	hwWsecAuthSuiteIndex	INTEGER
	hwWsecAuthSuite	OCTET STRING
	hwWsecAuthSuiteEnabled	TruthValue
	hwWsecAuthPreauthenticationImplemented	TruthValue
	hwWsecAuthPreauthenticationEnabled	TruthValue
	hwWsecAuthUnicastKeysSupported	Integer32
	hwWsecAuthPairwiseCipher	INTEGER
	hwWsecAuthPairwiseCipherSize	Integer32
	hwWsecAuthUnicastRekeyMethod	INTEGER
	hwWsecAuthUnicastRekeyTime	Unsigned32
	hwWsecAuthUnicastRekeyPackets	Unsigned32
	hwWsecAuthMulticastCipher	INTEGER
	hwWsecAuthMulticastCipherSize	Integer32
	hwWsecAuthMulticastRekeyMethod	INTEGER
	hwWsecAuthMulticastRekeyTime	Unsigned32
	hwWsecAuthMulticastRekeyPackets	Unsigned32
	hwWsecAuthMulticastRekeyStrict	TruthValue
	hwWsecAuthPSKValue	OCTET STRING
	hwWsecAuthPSKPassPhrase	DisplayString
	hwWsecAuthCertificateUpdateCount	Unsigned32
	hwWsecAuthMulticastUpdateCount	Unsigned32
	hwWsecAuthUnicastUpdateCount	Unsigned32
	hwWsecAuthBKLifetime	Unsigned32
	hwWsecAuthBKReauthThreshold	Unsigned32
	hwWsecAuthSATimeout	Unsigned32
	hwWsecAuthExcludeUnencrypted	TruthValue
	hwWsecAuthDot1XMethod	Integer32
	hwWsecAuthControlledAuthControl	TruthValue
	hwWsecAuthControlledPortControl	Integer32
	hwWsecAuthOptionalImplemented	TruthValue

HwWsecStatsEntry
SEQUENCE
	hwWsecStatsSTAAddress	MacAddress
	hwWsecStatsVersion	Integer32
	hwWsecStatsBKIDUsed	OCTET STRING
	hwWsecStatsAuthenticationSuiteSelected	INTEGER
	hwWsecStatsUnicastCipherSelected	INTEGER
	hwWsecStatsMulticastCipherSelected	INTEGER
	hwWsecStatsAuthenticationSuiteRequested	INTEGER
	hwWsecStatsUnicastCipherRequested	INTEGER
	hwWsecStatsMulticastCipherRequested	INTEGER
	hwWsecStatsWEPICVErrorCount	Counter32
	hwWsecStatsWEPExcludedCount	Counter32
	hwWsecStatsWEPUndecryptableCount	Counter32
	hwWsecStatsTKIPICVErrors	Counter32
	hwWsecStatsTKIPLocalMICFailures	Counter32
	hwWsecStatsTKIPRemoteMICFailures	Counter32
	hwWsecStatsTKIPReplays	Counter32
	hwWsecStatsCCMPReplays	Counter32
	hwWsecStatsCCMPDecryptErrors	Counter32
	hwWsecStatsWAISignatureErrors	Counter32
	hwWsecStatsWAIHMACErrors	Counter32
	hwWsecStatsWAIAuthenticationResultFailures	Counter32
	hwWsecStatsWAIDiscardCounters	Counter32
	hwWsecStatsWAITimeoutCounters	Counter32
	hwWsecStatsWAIFormatErrors	Counter32
	hwWsecStatsWAICertificateHandshakeFailures	Counter32
	hwWsecStatsWAIUnicastHandshakeFailures	Counter32
	hwWsecStatsWAIMulticastHandshakeFailures	Counter32
	hwWsecStatsWPIReplayCounter	Counter32
	hwWsecStatsWPIDecryptableErrors	Counter32
	hwWsecStatsWPIMICErrors	Counter32
	hwWsecStatsControlledPortStatus	TruthValue
	hwWsecStatsNumberOfPTKSAReplayCounters	Integer32
	hwWsecStatsNumberOfGTKSAReplayCounters	Integer32
	hwWsecStatsTKIPCounterMeasuresInvoked	Integer32
	hwWsecStatsWpa4WayHandshakeFailures	Integer32

Defined Values

hwWlanSecurity		1.3.6.1.4.1.2011.6.139.6
huawei HUAWEI-WLAN-SECURITY-MIB.
MODULE-IDENTITY

hwWsecProfileTable		1.3.6.1.4.1.2011.6.139.6.1
WLAN access security profile table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwWsecProfileEntry

hwWsecProfileEntry		1.3.6.1.4.1.2011.6.139.6.1.1
WLAN access security profile entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwWsecProfileEntry

hwWsecProfileName		1.3.6.1.4.1.2011.6.139.6.1.1.1
WLAN access security profile Name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..31)

hwWsecProfileWEPDataEncrypt		1.3.6.1.4.1.2011.6.139.6.1.1.2
When this attribute is TRUE, WEP data will be encrypted. When this attribute is FALSE, WEP data will not be encrypted. The default value of this attribute is FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hwWsecProfileWEPDefaultKeyID		1.3.6.1.4.1.2011.6.139.6.1.1.3
This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of zero, one, two, or three. The default value of this attribute shall be 0.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..3

hwWsecProfileWEPKeyMappingLength		1.3.6.1.4.1.2011.6.139.6.1.1.4
The maximum number of tuples that hwWsecWEPKeyMappings can hold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwWsecProfileAsuIpAddr		1.3.6.1.4.1.2011.6.139.6.1.1.5
ASU IP address for WAPI certification authentication
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwWsecProfileCaCertFileName		1.3.6.1.4.1.2011.6.139.6.1.1.6
CA certification file name
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hwWsecProfileAsuCertFileName		1.3.6.1.4.1.2011.6.139.6.1.1.7
ASU certification file name
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hwWsecProfileAcCertFileName		1.3.6.1.4.1.2011.6.139.6.1.1.8
AC certification file name
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hwWsecProfileAcPrvKeyFileName		1.3.6.1.4.1.2011.6.139.6.1.1.9
AC private key file name
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hwWsecProfileRsnaVersion		1.3.6.1.4.1.2011.6.139.6.1.1.10
The highest WAPI/RSNA version this entity supports. See 7.3.2.9.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecProfileWapiVersion		1.3.6.1.4.1.2011.6.139.6.1.1.11
This object indicates the highest WAPI version that this entity supports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecProfileRowStatus		1.3.6.1.4.1.2011.6.139.6.1.1.12
Row status
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwWsecProfileCaPfxPassword		1.3.6.1.4.1.2011.6.139.6.1.1.13
Description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwWsecProfileCaCertState		1.3.6.1.4.1.2011.6.139.6.1.1.14
Description.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwWsecProfileAsuPfxPassword		1.3.6.1.4.1.2011.6.139.6.1.1.15
Description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwWsecProfileAsuCertState		1.3.6.1.4.1.2011.6.139.6.1.1.16
Description.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwWsecProfileAcPfxPassword		1.3.6.1.4.1.2011.6.139.6.1.1.17
Description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwWsecProfileAcCertState		1.3.6.1.4.1.2011.6.139.6.1.1.18
Description.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwWsecProfileKeyPfxPassword		1.3.6.1.4.1.2011.6.139.6.1.1.19
Description.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwWsecProfileAsuType		1.3.6.1.4.1.2011.6.139.6.1.1.20
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remote(1), local(2)

hwWsecProfileWpaPtkRekeySwitch		1.3.6.1.4.1.2011.6.139.6.1.1.21
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwWsecProfileWpa2PtkRekeySwitch		1.3.6.1.4.1.2011.6.139.6.1.1.22
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwWsecProfileWpaWpa2PtkRekeySwitch		1.3.6.1.4.1.2011.6.139.6.1.1.23
Description.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwWsecProfileWpaPtkRekeyInterval		1.3.6.1.4.1.2011.6.139.6.1.1.24
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	30..86400

hwWsecProfileWpa2PtkRekeyInterval		1.3.6.1.4.1.2011.6.139.6.1.1.25
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	30..86400

hwWsecProfileWpaWpa2PtkRekeyInterval		1.3.6.1.4.1.2011.6.139.6.1.1.26
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	30..86400

hwWsecWEPDefaultKeysTable		1.3.6.1.4.1.2011.6.139.6.2
Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and values of null or zero. The default value of each WEP default key shall be null.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwWsecWEPDefaultKeysEntry

hwWsecWEPDefaultKeysEntry		1.3.6.1.4.1.2011.6.139.6.2.1
An Entry (conceptual row) in the WEP Default Keys Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwWsecWEPDefaultKeysEntry

hwWsecWEPDefaultKeyIndex		1.3.6.1.4.1.2011.6.139.6.2.1.1
The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..4

hwWsecWEPDefaultKeyValue		1.3.6.1.4.1.2011.6.139.6.2.1.2
A WEP default secret hexadecimal key value. 10 byte for WEP-40, 26 byte for WEP-104, 32 byte for WEP-128. Reading this variable shall return unsuccessful status or null or zero.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hwWsecWEPPassPhrase		1.3.6.1.4.1.2011.6.139.6.2.1.4
A WEP default secret ASCII key value. 5 byte for WEP-40, 13 byte for WEP-104, 16 byte for WEP-128. Reading this variable shall return unsuccessful status or null or zero.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

hwWsecWEPKeyMappingsTable		1.3.6.1.4.1.2011.6.139.6.3
Conceptual table for WEP Key Mappings. The MIB supports the ability to share a separate WEP key for each RA/TA pair. The Key Mappings Table contains zero or one entry for each MAC address and contains two fields for each entry: WEPOn and the corresponding WEP key. The WEP key mappings are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and values of null or zero. The default value for all WEPOn fields is FALSE.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwWsecWEPKeyMappingsEntry

hwWsecWEPKeyMappingsEntry		1.3.6.1.4.1.2011.6.139.6.3.1
An Entry (conceptual row) in the WEP Key Mappings Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwWsecWEPKeyMappingsEntry

hwWsecWEPKeyMappingIndex		1.3.6.1.4.1.2011.6.139.6.3.1.1
The auxiliary variable used to identify instances of the columnar objects in the WEP Key Mappings Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwWsecWEPKeyMappingAddress		1.3.6.1.4.1.2011.6.139.6.3.1.2
The MAC address of the STA for which the values from this key mapping entry are to be used.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

hwWsecWEPKeyMappingWEPOn		1.3.6.1.4.1.2011.6.139.6.3.1.3
Boolean as to whether WEP is to be used when communicating with the hwWsecWEPKeyMappingAddress STA.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hwWsecWEPKeyMappingValue		1.3.6.1.4.1.2011.6.139.6.3.1.4
A WEP secret key value.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING

hwWsecWEPKeyMappingStatus		1.3.6.1.4.1.2011.6.139.6.3.1.5
The status column used for creating, modifying, and deleting instances of the columnar objects in the WEP key mapping Table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwWsecAuthSuitesTable		1.3.6.1.4.1.2011.6.139.6.4
This table lists the AKM suites supported by this entity. Each AKM suite can be individually enabled and disabled. The AKM suite list in the RSN information element is formed using the information in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwWsecAuthSuitesEntry

hwWsecAuthSuitesEntry		1.3.6.1.4.1.2011.6.139.6.4.1
An entry (row) in the hwWsecAuthSuitesTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwWsecAuthSuitesEntry

hwWsecAuthSuiteIndex		1.3.6.1.4.1.2011.6.139.6.4.1.1
The auxiliary variable used as an index into the hwWsecAuthSuitesTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	wapiCertification(1), wapiPreShareKey(2), wpa18021x(3), wpa1PreShareKey(4), wpa28021x(5), wpa2PreShareKey(6), shareKey(7), openSystem(8), wpa1wpa2PreShareKey(9), wpa1wpa28021x(10)

hwWsecAuthSuite		1.3.6.1.4.1.2011.6.139.6.4.1.2
The selector of an AKM suite. It consists of an OUI (the first 3 octets) and a cipher suite identifier (the last octet). 0x00147201 : WAPI certification authentication 0x00147202 : WAPI preShare key authentication 0x000FAC01 : WPA1(WPA version 1) 802.1X authentication 0x000FAC02 : WPA1(WPA version 1) preShare key authentication 0x00E0FC01 : WPA2(WPA version 2) 802.1X authentication 0x00E0FC02 : WPA2(WPA version 2) preShare key authentication 0x00E0FC03 : share key (for WEP) 0x00E0FC04 : open system (no authentication) 0x00E0FC05 : wpa-wpa2-preShareKey 0x00E0FC06 : wpa-wpa2-8021x
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

hwWsecAuthSuiteEnabled		1.3.6.1.4.1.2011.6.139.6.4.1.3
This variable indicates whether the corresponding AKM suite is enabled/disabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hwWsecAuthPreauthenticationImplemented		1.3.6.1.4.1.2011.6.139.6.4.1.4
This variable indicates whether the entity supports WAPI pre-authentication. This cannot be TRUE unless hwWsecAuthOptionImplemented is TRUE.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hwWsecAuthPreauthenticationEnabled		1.3.6.1.4.1.2011.6.139.6.4.1.5
When this object is set to TRUE, this shall indicate that WAPI pre-authentication is enabled on this entity. This object requires that WAPI authentication of this profile Enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hwWsecAuthUnicastKeysSupported		1.3.6.1.4.1.2011.6.139.6.4.1.6
This object indicates the number of the unicast keys that a WAPI/RSNA of this entity supports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecAuthPairwiseCipher		1.3.6.1.4.1.2011.6.139.6.4.1.7
The selector of a supported pairwise cipher. It consists of an OUI (the first 3 octets) and a cipher suite identifier (the last octet). 0x00147201 : WPI-SMS4 0x000FAC00 : Use group cipher suite 0x000FAC01 : WEP-40 0x000FAC02 : TKIP 0x000FAC04 : CCMP-default in an RSNA 0x000FAC05 : WEP-104 0x000FAC06 : wep-128 0x000FAC07 : tkip-ccmp 0x00E0FC01 : null (no encryption), only for open system authentication The cipher suite selector 00-0F-AC:4 (CCMP) shall be the default cipher suite value. The cipher suite selectors 00-0F-AC:1 (WEP-40) and 00-0F-AC:5 (WEP-104) are only valid as a group cipher suite in a transition security network (TSN) to allow pre-RSNA devices to join the BSS. Use of CCMP as the group cipher suite with TKIP as the pairwise cipher suite shall not be supported. NOTE?If the STAs can support CCMP, then there is no need for a weaker data confidentiality protocol. The cipher suite selector 00-0F-AC:0 (Use group cipher suite) is only valid as the pairwise cipher suite. An AP may specify the selector 00-0F-AC:0 (Use group cipher suite) for a pairwise cipher suite if it does not cipher selection, this shall be the only pairwise cipher selection the AP advertises. If CCMP is enabled, then the AP supports pairwise keys, and thus the suite selector 00-0F-AC:0 (Use group cipher suite) shall not be a valid option.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	wpiSms4(1), wep40(2), wep104(3), tkip(4), ccmp(5), null(6), tkipCcmp(7), wep128(8)

hwWsecAuthPairwiseCipherSize		1.3.6.1.4.1.2011.6.139.6.4.1.8
This object indicates the length in bits of the pairwise cipher key. This should be 256 for TKIP and 128 for CCMP.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecAuthUnicastRekeyMethod		1.3.6.1.4.1.2011.6.139.6.4.1.9
This object selects a mechanism for rekeying the WAPI/RSNA USK. The default is time-based, once per day. Rekeying the USK is only applicable to an entity acting in the AE or ASUE role.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), timeBased(2), packetBased(3), timepacketBased(4)

hwWsecAuthUnicastRekeyTime		1.3.6.1.4.1.2011.6.139.6.4.1.10
The time in seconds after which the WAPI/RSNA USK shall be refreshed. The timer shall start at the moment the USK was set using the MLME-SETWPIKEYS.request primitive.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthUnicastRekeyPackets		1.3.6.1.4.1.2011.6.139.6.4.1.11
A packet count (in 1000s of packets) after which the WAPI/RSNA USK shall be refreshed. The packet counter shall start at the moment the USK was set using the MLME-SETWPIKEYS.request primitive and it shall count all packets encrypted using the current USK.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthMulticastCipher		1.3.6.1.4.1.2011.6.139.6.4.1.12
This object indicates the multicast cipher suite that this entity must adopt. The WAPI/RSNA information element shall adopt the value of this variable, which contains a 3-octet OUI and a one-octet cipher suite identifier. 0x00147201 : WPI-SMS4 0x000FAC01 : WEP-40 0x000FAC02 : TKIP 0x000FAC04 : CCMP-default in an RSNA 0x000FAC05 : WEP-104 0x000FAC06 : wep-128 0x000FAC07 : tkip-ccmp 0x00E0FC01 : null (no encryption), only for open system authentication
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	wpiSms4(1), wep40(2), wep104(3), tkip(4), ccmp(5), null(6), tkipCcmp(7), wep128(8)

hwWsecAuthMulticastCipherSize		1.3.6.1.4.1.2011.6.139.6.4.1.13
This object indicates the length in bit of the multicast cipher key. This should be 256 for in SMS4. The former 128bits is the encryption key and the latter 128bits is the message integrity check key. This should be 256 for in TKIP. The former 128bits is the encryption key and the latter 128bits is the message integrity check key. This should be 128 for in CCMP. The 128bits is the encryption key and the message integrity check key. This should be 40 for in WEP-40. The 40bits is the encryption key. This should be 40 for in WEP-104. The 104bits is the encryption key. This should be 40 for in WEP-128. The 128bits is the encryption key.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecAuthMulticastRekeyMethod		1.3.6.1.4.1.2011.6.139.6.4.1.14
This object selects a mechanism for rekeying the WAPI/RSNA MSK. The default is time-based, once per day. Rekeying the MSK is only applicable to an entity acting in the Authenticator role.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), timeBased(2), packetBased(3), timepacketBased(4)

hwWsecAuthMulticastRekeyTime		1.3.6.1.4.1.2011.6.139.6.4.1.15
The time in seconds after which the WAPI/RSNA MSK shall be refreshed. The timer shall start at the moment the MSK was set using the MLME-SETWPIKEYS.request primitive.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthMulticastRekeyPackets		1.3.6.1.4.1.2011.6.139.6.4.1.16
A packet count (in 1000s of packets) after which the WAPI/RSNA MSK shall be refreshed. The packet counter shall start at the moment the MSK was set using the MLME-SETWPIKEYS.request primitive and it shall count all packets encrypted using the current MSK.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthMulticastRekeyStrict		1.3.6.1.4.1.2011.6.139.6.4.1.17
This object signals that the MSK shall be refreshed whenever a STA leaves the BSS that possesses the MSK.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hwWsecAuthPSKValue		1.3.6.1.4.1.2011.6.139.6.4.1.18
The PSK for when WAPI/RSNA in PSK mode is the selected AKM suite. In that case, the BK/PMK will obtain its value from this object. This object is logically write-only. Reading this variable shall return unsuccessful status or null or zero. WAPI need 16 byte Hex, RSNA need 32 byte Hex. User should input Hex data for this node.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hwWsecAuthPSKPassPhrase		1.3.6.1.4.1.2011.6.139.6.4.1.19
The PSK, for when WAPI/RSNA in PSK mode is the selected AKM suite, is configured by hwWsecAuthPSKValue. An alternative manner of setting the PSK uses the password-to-key algorithm. This variable provides a means to enter a pass-phrase. When this object is written, the WAPI/RSNA entity shall use the password-to-key algorithm to derive a pre-shared and populate hwWsecAuthPSKValue with this key. This object is logically write-only. Reading this variable shall return unsuccessful status or null or zero.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

hwWsecAuthCertificateUpdateCount		1.3.6.1.4.1.2011.6.139.6.4.1.20
The number of times messages in the WAPI Certificate Authentication Handshake protocol will be retried per Certificate Authentication Handshake attempt.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthMulticastUpdateCount		1.3.6.1.4.1.2011.6.139.6.4.1.21
The number of times Message 1 in the WAPI Multicast Key Announcement Handshake will be retried per MSK Handshake attempt. The number of times Message 1 in the RSNA Group Key Handshake will be retried per GTK Handshake attempt.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthUnicastUpdateCount		1.3.6.1.4.1.2011.6.139.6.4.1.22
The number of times Message 1 and Message 3 in the WAPI Unicast Key Negotiation Handshake will be retried per USK Handshake attempt. The number of times Message 1 and Message 3 in the RSNA 4-Way Handshake will be retried per 4-Way Handshake attempt.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthBKLifetime		1.3.6.1.4.1.2011.6.139.6.4.1.23
The maximum lifetime of a BK in the BK cache.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthBKReauthThreshold		1.3.6.1.4.1.2011.6.139.6.4.1.24
The percentage of the BK lifetime that should expire before a WAI/RSNA re-authentication occurs.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthSATimeout		1.3.6.1.4.1.2011.6.139.6.4.1.25
The maximum time a security association shall take to set up.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwWsecAuthExcludeUnencrypted		1.3.6.1.4.1.2011.6.139.6.4.1.26
When this attribute is TRUE, the STA shall not indicate at the MAC service interface received MSDUs that have the Protected Frame subfield of the Frame Control field equal to zero. When this attribute is FALSE, the STA may accept MSDUs that have the Protected Frame subfield of the Frame Control field equal to zero. The default value of this attribute shall be FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hwWsecAuthDot1XMethod		1.3.6.1.4.1.2011.6.139.6.4.1.27
Leaf don't sustain for V2R3 on 2012/11/26.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwWsecAuthControlledAuthControl		1.3.6.1.4.1.2011.6.139.6.4.1.28
This attribute indicates whether the entity enable the authentication. If the value is '0' which means 'authentication disabled', the state of the controlled port shall be set to 'authenticated'; else the value is '1' which means 'authentication enabled', the state of the controlled port shall be based on the hwWsecAuthControlledPortControl.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hwWsecAuthControlledPortControl		1.3.6.1.4.1.2011.6.139.6.4.1.29
This attribute, when the hwWsecAuthControlledAuthControl is set to true, shall be effective and indicate the methods by which the port is controlled. If the value is '0' which means 'auto', the state of the controlled port shall be based on the result of the authentication; else the value is '1' which means 'force unauthenticated', the state of the controlled port shall be unconditionally set to 'unauthenticated'.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecAuthOptionalImplemented		1.3.6.1.4.1.2011.6.139.6.4.1.30
This attribute, when true, shall indicate that the WAPI, WPA, RSNA option is implemented; else, this attribute shall be false.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hwWsecStatsTable		1.3.6.1.4.1.2011.6.139.6.5
This table maintains per-STA statistics in an RSN. The entry with hwWsecStatsSTAAddress set to FF-FF-FF-FF-FF-FF shall contain statistics for broadcast/multicast traffic.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwWsecStatsEntry

hwWsecStatsEntry		1.3.6.1.4.1.2011.6.139.6.5.1
An entry in the hwWsecStatsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwWsecStatsEntry

hwWsecStatsSTAAddress		1.3.6.1.4.1.2011.6.139.6.5.1.1
The MAC address of the STA to which the statistics in this conceptual row belong.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

hwWsecStatsVersion		1.3.6.1.4.1.2011.6.139.6.5.1.2
The RSNA version with which the STA associated.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecStatsBKIDUsed		1.3.6.1.4.1.2011.6.139.6.5.1.3
The selector of the last BKID of WAPI used in the last Unicast Key Negotiation Handshake. The selector of the last PMKID of RSNA used in the last 4-Way Handshake.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwWsecStatsAuthenticationSuiteSelected		1.3.6.1.4.1.2011.6.139.6.5.1.4
The selector of the last AKM suite negotiated.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wapiCertification(1), wapiPreShareKey(2), wpa18021x(3), wpa1PreShareKey(4), wpa28021x(5), wpa2PreShareKey(6), shareKey(7), openSystem(8), wpa1wpa2PreShareKey(9), wpa1wpa28021x(10)

hwWsecStatsUnicastCipherSelected		1.3.6.1.4.1.2011.6.139.6.5.1.5
The selector of the last unicast cipher suite negotiated.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wpiSms4(1), wep40(2), wep104(3), tkip(4), ccmp(5), null(6), tkipCcmp(7), wep128(8)

hwWsecStatsMulticastCipherSelected		1.3.6.1.4.1.2011.6.139.6.5.1.6
The selector of the last multicast cipher suite negotiated
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wpiSms4(1), wep40(2), wep104(3), tkip(4), ccmp(5), null(6), tkipCcmp(7), wep128(8)

hwWsecStatsAuthenticationSuiteRequested		1.3.6.1.4.1.2011.6.139.6.5.1.7
The selector of the last AKM suite requested.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wapiCertification(1), wapiPreShareKey(2), wpa18021x(3), wpa1PreShareKey(4), wpa28021x(5), wpa2PreShareKey(6), shareKey(7), openSystem(8), wpa1wpa2PreShareKey(9), wpa1wpa28021x(10)

hwWsecStatsUnicastCipherRequested		1.3.6.1.4.1.2011.6.139.6.5.1.8
The selector of the last unicast cipher suite requested
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wpiSms4(1), wep40(2), wep104(3), tkip(4), ccmp(5), null(6), tkipCcmp(7), wep128(8)

hwWsecStatsMulticastCipherRequested		1.3.6.1.4.1.2011.6.139.6.5.1.9
The selector of the last multicast cipher suite requested.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wpiSms4(1), wep40(2), wep104(3), tkip(4), ccmp(5), null(6), tkipCcmp(7), wep128(8)

hwWsecStatsWEPICVErrorCount		1.3.6.1.4.1.2011.6.139.6.5.1.10
This counter shall increment when a frame is received with the Protected Frame subfield of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame. ICV errors for TKIP are not counted in this variable but in hwWsecStatsTKIPICVErrors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWEPExcludedCount		1.3.6.1.4.1.2011.6.139.6.5.1.11
This counter shall increment when a frame is received with the Protected Frame subfield of the Frame Control field set to zero and the value of hwWsecProfileExcludeUnencrypted causes that frame to be discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWEPUndecryptableCount		1.3.6.1.4.1.2011.6.139.6.5.1.12
This counter shall increment when a frame is received with the Protected Frame subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the transmitter's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsTKIPICVErrors		1.3.6.1.4.1.2011.6.139.6.5.1.13
Counts the number of TKIP ICV errors encountered when decrypting packets for the STA.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsTKIPLocalMICFailures		1.3.6.1.4.1.2011.6.139.6.5.1.14
Counts the number of MIC failures encountered when checking the integrity of packets received from the STA at this entity.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsTKIPRemoteMICFailures		1.3.6.1.4.1.2011.6.139.6.5.1.15
Counts the number of MIC failures encountered by the STA identified by dot11StatsSTAAddress and reported back to this entity.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsTKIPReplays		1.3.6.1.4.1.2011.6.139.6.5.1.16
Counts the number of TKIP replay errors detected.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsCCMPReplays		1.3.6.1.4.1.2011.6.139.6.5.1.17
The number of received CCMP MPDUs discarded by the replay mechanism.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsCCMPDecryptErrors		1.3.6.1.4.1.2011.6.139.6.5.1.18
The number of received MPDUs discarded by the CCMP decryption algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAISignatureErrors		1.3.6.1.4.1.2011.6.139.6.5.1.19
This counter shall increment when the signature in the received WAI packet is wrong.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAIHMACErrors		1.3.6.1.4.1.2011.6.139.6.5.1.20
This counter shall increment when the message authentication code in the received WAI packet is wrong.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAIAuthenticationResultFailures		1.3.6.1.4.1.2011.6.139.6.5.1.21
This counter shall increment when the WAI authentication is unsuccessful.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAIDiscardCounters		1.3.6.1.4.1.2011.6.139.6.5.1.22
This counter shall increment when the received WAI packet is discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAITimeoutCounters		1.3.6.1.4.1.2011.6.139.6.5.1.23
This counter shall increment when the WAI packet is timeout.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAIFormatErrors		1.3.6.1.4.1.2011.6.139.6.5.1.24
This counter shall increment when there exists format error in the WAI packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAICertificateHandshakeFailures		1.3.6.1.4.1.2011.6.139.6.5.1.25
This counter shall increment when the WAI certificate authentication is unsuccessful.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAIUnicastHandshakeFailures		1.3.6.1.4.1.2011.6.139.6.5.1.26
This counter shall increment when the WAI unicast key negotiation process is unsuccessful.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWAIMulticastHandshakeFailures		1.3.6.1.4.1.2011.6.139.6.5.1.27
This counter shall increment when the WAI multicast key announcement process is unsuccessful.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWPIReplayCounter		1.3.6.1.4.1.2011.6.139.6.5.1.28
The number of received WPI MPDUs discarded by the replay mechanism.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWPIDecryptableErrors		1.3.6.1.4.1.2011.6.139.6.5.1.29
The number of received MPDUs discarded by the WPI decryption algorithm because of no valid key.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsWPIMICErrors		1.3.6.1.4.1.2011.6.139.6.5.1.30
The number of received MPDUs discarded because of the MIC check error during the WPI decryption.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwWsecStatsControlledPortStatus		1.3.6.1.4.1.2011.6.139.6.5.1.31
This attribute indicates the state of the controlled port in a authenticator subsystem. If value is '1', the state is set to'authenticated'; else, the state is set to 'unauthenticated'.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hwWsecStatsNumberOfPTKSAReplayCounters		1.3.6.1.4.1.2011.6.139.6.5.1.32
Specifies the number of PTKSA replay counters per association: 0 ?> 1 replay counter, 1 ?> 2 replay counters, 2 ?> 4 replay counters, 3 ?> 16 replay counters
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecStatsNumberOfGTKSAReplayCounters		1.3.6.1.4.1.2011.6.139.6.5.1.33
Specifies the number of GTKSA replay counters per association: 0 ?> 1 replay counter, 1 ?> 2 replay counters, 2 ?> 4 replay counters, 3 ?> 16 replay counters
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecStatsTKIPCounterMeasuresInvoked		1.3.6.1.4.1.2011.6.139.6.5.1.34
Counts the number of times that a TKIP MIC failure occurred two times within 60 s and TKIP countermeasures were invoked. This attribute counts both local and remote MIC failure events reported to this STA. It increments every time TKIP countermeasures are invoked
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecStatsWpa4WayHandshakeFailures		1.3.6.1.4.1.2011.6.139.6.5.1.35
Counts the number of 4-Way Handshake failures.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecBatchProfileInfo		1.3.6.1.4.1.2011.6.139.6.6
OBJECT IDENTIFIER

hwWsecBatchProfileStartNumber		1.3.6.1.4.1.2011.6.139.6.6.1
The security profile start number in batch operation. This node is used with node hwWsecBatchProfileWantNumber, for example, hwWsecBatchProfileStartNumber is set to one, and hwWsecBatchProfileWantNumber is set to three, then get the node hwWsecBatchProfileReturnNumber,hwWsecBatchProfileName, that means start from the first security profile, get three security profile's name list. if it dose not exist three security profile, the hwWsecBatchProfileReturnNumber will be the real security profile number, otherwise, it is equal to hwWsecBatchProfileWantNumber.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwWsecBatchProfileWantNumber		1.3.6.1.4.1.2011.6.139.6.6.2
The security profile number that want to get in batch operation.This node is used with node hwWsecBatchProfileWantNumber, for example, hwWsecBatchProfileStartNumber is set to one, and hwWsecBatchProfileWantNumber is set to three, then get the node hwWsecBatchProfileReturnNumber,hwWsecBatchProfileName, that means start from the first security profile, get three security profile's name list. if it dose not exist three security profile, the hwWsecBatchProfileReturnNumber will be the real security profile number, otherwise, it is equal to hwWsecBatchProfileWantNumber.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwWsecBatchProfileReturnNumber		1.3.6.1.4.1.2011.6.139.6.6.3
The ess number get in batch operation.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWsecBatchProfileName		1.3.6.1.4.1.2011.6.139.6.6.4
The names of security profile which are determined by node hwWsecBatchProfileStratNumber and node hwWsecBatchProfileWantNumber. each hwWsecProfileName name is divided by '?'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwWsecNotifications		1.3.6.1.4.1.2011.6.139.6.9
OBJECT IDENTIFIER

hwWsecNotify		1.3.6.1.4.1.2011.6.139.6.9.1
OBJECT IDENTIFIER

hwStaAuthErrorNotify		1.3.6.1.4.1.2011.6.139.6.9.1.1
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwStaAssociationFailNotify		1.3.6.1.4.1.2011.6.139.6.9.1.2
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwUserWithInvalidCerficationInbreakNetworkNotify		1.3.6.1.4.1.2011.6.139.6.9.1.3
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwStationRepititiveAttackNotify		1.3.6.1.4.1.2011.6.139.6.9.1.4
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwTamperAttackNotify		1.3.6.1.4.1.2011.6.139.6.9.1.5
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwLowSafeLevelAttackNotify		1.3.6.1.4.1.2011.6.139.6.9.1.6
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwAddressRedirectionAttackNotify		1.3.6.1.4.1.2011.6.139.6.9.1.7
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwWepIDConflictNotify		1.3.6.1.4.1.2011.6.139.6.9.1.8
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwStaAuthEncryptModeNotMatchNotify		1.3.6.1.4.1.2011.6.139.6.9.1.9
Description.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwWsecNotifyObjects		1.3.6.1.4.1.2011.6.139.6.9.2
OBJECT IDENTIFIER

hwStaAuthenticationMode		1.3.6.1.4.1.2011.6.139.6.9.2.1
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwStaAuthenticationFailCause		1.3.6.1.4.1.2011.6.139.6.9.2.2
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwStaAssociationFailCause		1.3.6.1.4.1.2011.6.139.6.9.2.3
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwStaAssocBssid		1.3.6.1.4.1.2011.6.139.6.9.2.4
Description.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

hwStaFailCodeType		1.3.6.1.4.1.2011.6.139.6.9.2.5
Description.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	reasonCode(1), statusCode(2)

hwWepIDConflictTrapAPMAC		1.3.6.1.4.1.2011.6.139.6.9.2.6
Description.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

hwWepIDConflictTrapAPID		1.3.6.1.4.1.2011.6.139.6.9.2.7
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWepIDConflictTrapRadioId		1.3.6.1.4.1.2011.6.139.6.9.2.8
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWepIDConflictTrapPreSSID		1.3.6.1.4.1.2011.6.139.6.9.2.9
Description.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwWepIDConflictTrapCurrSSID		1.3.6.1.4.1.2011.6.139.6.9.2.10
Description.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwWepIDConflictTrapCipherIdx		1.3.6.1.4.1.2011.6.139.6.9.2.11
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWlanStaAuthEncryptMode		1.3.6.1.4.1.2011.6.139.6.9.2.12
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWlanVapAuthEncryptMode		1.3.6.1.4.1.2011.6.139.6.9.2.13
Description.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwStaAuthenticationFailCauseStr		1.3.6.1.4.1.2011.6.139.6.9.2.14
Description.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwStaAssociationFailCauseStr		1.3.6.1.4.1.2011.6.139.6.9.2.15
Description.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwWlanSecurityObject		1.3.6.1.4.1.2011.6.139.6.10
OBJECT IDENTIFIER

hwWlanSecurityConformance		1.3.6.1.4.1.2011.6.139.6.11
OBJECT IDENTIFIER

hwWlanSecurityCompliances		1.3.6.1.4.1.2011.6.139.6.11.1
OBJECT IDENTIFIER

hwWlanSecurityCompliance		1.3.6.1.4.1.2011.6.139.6.11.1.1
Description.
Status: current	Access: read-only
MODULE-COMPLIANCE

hwWlanSecurityObjectGroups		1.3.6.1.4.1.2011.6.139.6.11.2
OBJECT IDENTIFIER

hwWsecProfileGroup		1.3.6.1.4.1.2011.6.139.6.11.2.1
Description.
Status: current	Access: read-only
OBJECT-GROUP

hwWsecWEPDefaultKeysGroup		1.3.6.1.4.1.2011.6.139.6.11.2.2
Description.
Status: current	Access: read-only
OBJECT-GROUP

hwWsecWEPKeyMappingsGroup		1.3.6.1.4.1.2011.6.139.6.11.2.3
Description.
Status: current	Access: read-only
OBJECT-GROUP

hwWsecAuthSuitesGroup		1.3.6.1.4.1.2011.6.139.6.11.2.4
Description.
Status: current	Access: read-only
OBJECT-GROUP

hwWsecStatsGroup		1.3.6.1.4.1.2011.6.139.6.11.2.5
Description.
Status: current	Access: read-only
OBJECT-GROUP

hwWsecBatchProfileInfoGroup		1.3.6.1.4.1.2011.6.139.6.11.2.6
Description.
Status: current	Access: read-only
OBJECT-GROUP

hwWsecNotifyGroup		1.3.6.1.4.1.2011.6.139.6.11.2.7
Description.
Status: current	Access: read-only
NOTIFICATION-GROUP

hwWsecNotifyObjectsGroup		1.3.6.1.4.1.2011.6.139.6.11.2.8
Description.
Status: current	Access: read-only
OBJECT-GROUP