HUAWEI-WLAN-QOS-MIB

File: HUAWEI-WLAN-QOS-MIB.mib (40544 bytes)

Imported modules

HUAWEI-WLAN-MIB	SNMPv2-CONF	SNMPv2-SMI
SNMPv2-TC

Imported symbols

hwWlan	OBJECT-GROUP	MODULE-COMPLIANCE
Integer32	Unsigned32	OBJECT-TYPE
MODULE-IDENTITY	RowStatus

Defined Types

HwWlanWmmProfileEntry
SEQUENCE
	hwWlanWmmProfileName	OCTET STRING
	hwWlanWmmSwitch	INTEGER
	hwWlanWmmMandatorySwitch	INTEGER
	hwWlanWmmProfileRowStatus	RowStatus
	hwQAPEDCAVoiceECWmax	Integer32
	hwQAPEDCAVoiceECWmin	Integer32
	hwQAPEDCAVoiceAIFSN	Integer32
	hwQAPEDCAVoiceTXOPLimit	Integer32
	hwQAPEDCAVoiceACKPolicy	INTEGER
	hwQAPEDCAVideoECWmax	Integer32
	hwQAPEDCAVideoECWmin	Integer32
	hwQAPEDCAVideoAIFSN	Integer32
	hwQAPEDCAVideoTXOPLimit	Integer32
	hwQAPEDCAVideoACKPolicy	INTEGER
	hwQAPEDCABEECWmax	Integer32
	hwQAPEDCABEECWmin	Integer32
	hwQAPEDCABEAIFSN	Integer32
	hwQAPEDCABETXOPLimit	Integer32
	hwQAPEDCABEACKPolicy	INTEGER
	hwQAPEDCABKECWmax	Integer32
	hwQAPEDCABKECWmin	Integer32
	hwQAPEDCABKAIFSN	Integer32
	hwQAPEDCABKTXOPLimit	Integer32
	hwQAPEDCABKACKPolicy	INTEGER
	hwQClientEDCAVoiceECWmax	Integer32
	hwQClientEDCAVoiceECWmin	Integer32
	hwQClientEDCAVoiceAIFSN	Integer32
	hwQClientEDCAVoiceTXOPLimit	Integer32
	hwQClientEDCAVideoECWmax	Integer32
	hwQClientEDCAVideoECWmin	Integer32
	hwQClientEDCAVideoAIFSN	Integer32
	hwQClientEDCAVideoTXOPLimit	Integer32
	hwQClientEDCABEECWmax	Integer32
	hwQClientEDCABEECWmin	Integer32
	hwQClientEDCABEAIFSN	Integer32
	hwQClientEDCABETXOPLimit	Integer32
	hwQClientEDCABKECWmax	Integer32
	hwQClientEDCABKECWmin	Integer32
	hwQClientEDCABKAIFSN	Integer32
	hwQClientEDCABKTXOPLimit	Integer32

HwWlanTrafficProfileEntry
SEQUENCE
	hwWlanTrafficProfileName	OCTET STRING
	hwWlanTrafficProfileRowStatus	RowStatus
	hwWlanClientUpLimitRate	Unsigned32
	hwWlanVAPUpLimitRate	Unsigned32
	hwWlan8021pMapMode	INTEGER
	hwWlan8021pSpecValue	Integer32
	hwWlanUP0Map8021p	Integer32
	hwWlanUP1Map8021p	Integer32
	hwWlanUP2Map8021p	Integer32
	hwWlanUP3Map8021p	Integer32
	hwWlanUP4Map8021p	Integer32
	hwWlanUP5Map8021p	Integer32
	hwWlanUP6Map8021p	Integer32
	hwWlanUP7Map8021p	Integer32
	hwWlan8021p0MapUPValue	Integer32
	hwWlan8021p1MapUPValue	Integer32
	hwWlan8021p2MapUPValue	Integer32
	hwWlan8021p3MapUPValue	Integer32
	hwWlan8021p4MapUPValue	Integer32
	hwWlan8021p5MapUPValue	Integer32
	hwWlan8021p6MapUPValue	Integer32
	hwWlan8021p7MapUPValue	Integer32
	hwWlanUpTunnelPriorityMapMode	INTEGER
	hwWlanUpTunnelPrioritySpecValue	Integer32
	hwWlanValue0MapUpTunnelPriority	Integer32
	hwWlanValue1MapUpTunnelPriority	Integer32
	hwWlanValue2MapUpTunnelPriority	Integer32
	hwWlanValue3MapUpTunnelPriority	Integer32
	hwWlanValue4MapUpTunnelPriority	Integer32
	hwWlanValue5MapUpTunnelPriority	Integer32
	hwWlanValue6MapUpTunnelPriority	Integer32
	hwWlanValue7MapUpTunnelPriority	Integer32
	hwWlanDownTunnelPriorityMapMode	INTEGER
	hwWlanDownTunnelPrioritySpecValue	Integer32
	hwWlanValue0MapDownTunnelPriority	Integer32
	hwWlanValue1MapDownTunnelPriority	Integer32
	hwWlanValue2MapDownTunnelPriority	Integer32
	hwWlanValue3MapDownTunnelPriority	Integer32
	hwWlanValue4MapDownTunnelPriority	Integer32
	hwWlanValue5MapDownTunnelPriority	Integer32
	hwWlanValue6MapDownTunnelPriority	Integer32
	hwWlanValue7MapDownTunnelPriority	Integer32
	hwWlanClientDownLimitRate	Unsigned32
	hwWlanVAPDownLimitRate	Unsigned32
	hwWlanTos0MapUPValue	Integer32
	hwWlanTos1MapUPValue	Integer32
	hwWlanTos2MapUPValue	Integer32
	hwWlanTos3MapUPValue	Integer32
	hwWlanTos4MapUPValue	Integer32
	hwWlanTos5MapUPValue	Integer32
	hwWlanTos6MapUPValue	Integer32
	hwWlanTos7MapUPValue	Integer32

Defined Values

hwWlanQosManagement		1.3.6.1.4.1.2011.6.139.5
Wlan QoS management.
MODULE-IDENTITY

hwWlanWmmProfileTable		1.3.6.1.4.1.2011.6.139.5.1
Wmm profile management table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwWlanWmmProfileEntry

hwWlanWmmProfileEntry		1.3.6.1.4.1.2011.6.139.5.1.1
Wmm profile management entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwWlanWmmProfileEntry

hwWlanWmmProfileName		1.3.6.1.4.1.2011.6.139.5.1.1.1
Wmm profile name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..31)

hwWlanWmmSwitch		1.3.6.1.4.1.2011.6.139.5.1.1.2
The wmm switch.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwWlanWmmMandatorySwitch		1.3.6.1.4.1.2011.6.139.5.1.1.3
The mandatory switch.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwWlanWmmProfileRowStatus		1.3.6.1.4.1.2011.6.139.5.1.1.4
Row status. Add or delete a table item.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwQAPEDCAVoiceECWmax		1.3.6.1.4.1.2011.6.139.5.1.1.5
Exponent form of CWmax. This attribute shall specify the value of ECWmax that shall be used by an AP for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQAPEDCAVoiceECWmin		1.3.6.1.4.1.2011.6.139.5.1.1.6
Exponent form of CWmin. This attribute shall specify the value of ECWmin that shall be used by an AP for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQAPEDCAVoiceAIFSN		1.3.6.1.4.1.2011.6.139.5.1.1.7
Arbitration Inter Frame Spacing Number. This attribute shall specify the value of AIFSN that shall be used by an AP for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hwQAPEDCAVoiceTXOPLimit		1.3.6.1.4.1.2011.6.139.5.1.1.8
Transmission Opportunity Limit. This attribute shall specify the value of TXOPLimit that shall be used by an AP for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwQAPEDCAVoiceACKPolicy		1.3.6.1.4.1.2011.6.139.5.1.1.9
ACK policy. This attribute shall specify the policy of ACK that shall be used by an AP for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	normal(1), noack(2)

hwQAPEDCAVideoECWmax		1.3.6.1.4.1.2011.6.139.5.1.1.10
Exponent form of CWmax. This attribute shall specify the value of ECWmax that shall be used by an AP for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQAPEDCAVideoECWmin		1.3.6.1.4.1.2011.6.139.5.1.1.11
Exponent form of CWmin. This attribute shall specify the value of ECWmin that shall be used by an AP for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQAPEDCAVideoAIFSN		1.3.6.1.4.1.2011.6.139.5.1.1.12
Arbitration Inter Frame Spacing Number. This attribute shall specify the value of AIFSN that shall be used by an AP for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hwQAPEDCAVideoTXOPLimit		1.3.6.1.4.1.2011.6.139.5.1.1.13
Transmission Opportunity Limit. This attribute shall specify the value of TXOPLimit that shall be used by an AP for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwQAPEDCAVideoACKPolicy		1.3.6.1.4.1.2011.6.139.5.1.1.14
ACK policy. This attribute shall specify the policy of ACK that shall be used by an AP for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	normal(1), noack(2)

hwQAPEDCABEECWmax		1.3.6.1.4.1.2011.6.139.5.1.1.15
Exponent form of CWmax. This attribute shall specify the value of ECWmax that shall be used by an AP for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQAPEDCABEECWmin		1.3.6.1.4.1.2011.6.139.5.1.1.16
Exponent form of CWmin. This attribute shall specify the value of ECWmin that shall be used by an AP for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQAPEDCABEAIFSN		1.3.6.1.4.1.2011.6.139.5.1.1.17
Arbitration Inter Frame Spacing Number. This attribute shall specify the value of AIFSN that shall be used by an AP for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hwQAPEDCABETXOPLimit		1.3.6.1.4.1.2011.6.139.5.1.1.18
Transmission Opportunity Limit. This attribute shall specify the value of TXOPLimit that shall be used by an AP for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwQAPEDCABEACKPolicy		1.3.6.1.4.1.2011.6.139.5.1.1.19
ACK policy. This attribute shall specify the policy of ACK that shall be used by an AP for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	normal(1), noack(2)

hwQAPEDCABKECWmax		1.3.6.1.4.1.2011.6.139.5.1.1.20
Exponent form of CWmax. This attribute shall specify the value of ECWmax that shall be used by an AP for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQAPEDCABKECWmin		1.3.6.1.4.1.2011.6.139.5.1.1.21
Exponent form of CWmin. This attribute shall specify the value of ECWmin that shall be used by an AP for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQAPEDCABKAIFSN		1.3.6.1.4.1.2011.6.139.5.1.1.22
Arbitration Inter Frame Spacing Number. This attribute shall specify the value of AIFSN that shall be used by an AP for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hwQAPEDCABKTXOPLimit		1.3.6.1.4.1.2011.6.139.5.1.1.23
Transmission Opportunity Limit. This attribute shall specify the value of TXOPLimit that shall be used by an AP for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwQAPEDCABKACKPolicy		1.3.6.1.4.1.2011.6.139.5.1.1.24
ACK policy. This attribute shall specify the policy of ACK that shall be used by an AP for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	normal(1), noack(2)

hwQClientEDCAVoiceECWmax		1.3.6.1.4.1.2011.6.139.5.1.1.25
Exponent form of CWmax. This attribute shall specify the value of ECWmax that shall be used by a STA for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQClientEDCAVoiceECWmin		1.3.6.1.4.1.2011.6.139.5.1.1.26
Exponent form of CWmin. This attribute shall specify the value of ECWmin that shall be used by a STA for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQClientEDCAVoiceAIFSN		1.3.6.1.4.1.2011.6.139.5.1.1.27
Arbitration Inter Frame Spacing Number. This attribute shall specify the value of AIFSN that shall be used by a STA for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hwQClientEDCAVoiceTXOPLimit		1.3.6.1.4.1.2011.6.139.5.1.1.28
Transmission Opportunity Limit. This attribute shall specify the value of TXOPLimit that shall be used by a STA for AC_VO.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwQClientEDCAVideoECWmax		1.3.6.1.4.1.2011.6.139.5.1.1.29
Exponent form of CWmax. This attribute shall specify the value of ECWmax that shall be used by a STA for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQClientEDCAVideoECWmin		1.3.6.1.4.1.2011.6.139.5.1.1.30
Exponent form of CWmin. This attribute shall specify the value of ECWmin that shall be used by a STA for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQClientEDCAVideoAIFSN		1.3.6.1.4.1.2011.6.139.5.1.1.31
Arbitration Inter Frame Spacing Number. This attribute shall specify the value of AIFSN that shall be used by a STA for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hwQClientEDCAVideoTXOPLimit		1.3.6.1.4.1.2011.6.139.5.1.1.32
Transmission Opportunity Limit. This attribute shall specify the value of TXOPLimit that shall be used by a STA for AC_VI.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwQClientEDCABEECWmax		1.3.6.1.4.1.2011.6.139.5.1.1.33
Exponent form of CWmax. This attribute shall specify the value of ECWmax that shall be used by a STA for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQClientEDCABEECWmin		1.3.6.1.4.1.2011.6.139.5.1.1.34
Exponent form of CWmin. This attribute shall specify the value of ECWmin that shall be used by a STA for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQClientEDCABEAIFSN		1.3.6.1.4.1.2011.6.139.5.1.1.35
Arbitration Inter Frame Spacing Number. This attribute shall specify the value of AIFSN that shall be used by a STA for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hwQClientEDCABETXOPLimit		1.3.6.1.4.1.2011.6.139.5.1.1.36
Transmission Opportunity Limit. This attribute shall specify the value of TXOPLimit that shall be used by a STA for AC_BE.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwQClientEDCABKECWmax		1.3.6.1.4.1.2011.6.139.5.1.1.37
Exponent form of CWmax. This attribute shall specify the value of ECWmax that shall be used by a STA for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQClientEDCABKECWmin		1.3.6.1.4.1.2011.6.139.5.1.1.38
Exponent form of CWmin. This attribute shall specify the value of ECWmin that shall be used by a STA for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwQClientEDCABKAIFSN		1.3.6.1.4.1.2011.6.139.5.1.1.39
Arbitration Inter Frame Spacing Number. This attribute shall specify the value of AIFSN that shall be used by a STA for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hwQClientEDCABKTXOPLimit		1.3.6.1.4.1.2011.6.139.5.1.1.40
Transmission Opportunity Limit. This attribute shall specify the value of TXOPLimit that shall be used by a STA for AC_BK.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwWlanTrafficProfileTable		1.3.6.1.4.1.2011.6.139.5.2
Traffic profile management table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwWlanTrafficProfileEntry

hwWlanTrafficProfileEntry		1.3.6.1.4.1.2011.6.139.5.2.1
Traffic profile management entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwWlanTrafficProfileEntry

hwWlanTrafficProfileName		1.3.6.1.4.1.2011.6.139.5.2.1.1
Traffic profile name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..31)

hwWlanTrafficProfileRowStatus		1.3.6.1.4.1.2011.6.139.5.2.1.2
Row status. Add or delete a table item.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwWlanClientUpLimitRate		1.3.6.1.4.1.2011.6.139.5.2.1.3
The up limit rate of client.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hwWlanVAPUpLimitRate		1.3.6.1.4.1.2011.6.139.5.2.1.4
The up limit rate of VAP.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hwWlan8021pMapMode		1.3.6.1.4.1.2011.6.139.5.2.1.5
The mapping mode of user-priority to 802.1p, supporting mapping and designate.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	designate(1), mapping(2)

hwWlan8021pSpecValue		1.3.6.1.4.1.2011.6.139.5.2.1.6
Designate the 802.1p priority value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanUP0Map8021p		1.3.6.1.4.1.2011.6.139.5.2.1.7
The mapping 802.1p priority value from user-priority 0.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanUP1Map8021p		1.3.6.1.4.1.2011.6.139.5.2.1.8
The mapping 802.1p priority value from user-priority 1.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanUP2Map8021p		1.3.6.1.4.1.2011.6.139.5.2.1.9
The mapping 802.1p priority value from user-priority 2.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanUP3Map8021p		1.3.6.1.4.1.2011.6.139.5.2.1.10
The mapping 802.1p priority value from user-priority 3.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanUP4Map8021p		1.3.6.1.4.1.2011.6.139.5.2.1.11
The mapping 802.1p priority value from user-priority 4.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanUP5Map8021p		1.3.6.1.4.1.2011.6.139.5.2.1.12
The mapping 802.1p priority value from user-priority 5.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanUP6Map8021p		1.3.6.1.4.1.2011.6.139.5.2.1.13
The mapping 802.1p priority value from user-priority 6.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanUP7Map8021p		1.3.6.1.4.1.2011.6.139.5.2.1.14
The mapping 802.1p priority value from user-priority 7.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlan8021p0MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.15
The mapping user-priority value from 802.1p priority value 0.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlan8021p1MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.16
The mapping user-priority value from 802.1p priority value 1.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlan8021p2MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.17
The mapping user-priority value from 802.1p priority value 2.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlan8021p3MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.18
The mapping user-priority value from 802.1p priority value 3.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlan8021p4MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.19
The mapping user-priority value from 802.1p priority value 4.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlan8021p5MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.20
The mapping user-priority value from 802.1p priority value 5.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlan8021p6MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.21
The mapping user-priority value from 802.1p priority value 6.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlan8021p7MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.22
The mapping user-priority value from 802.1p priority value 7.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanUpTunnelPriorityMapMode		1.3.6.1.4.1.2011.6.139.5.2.1.23
The mapping mode to up tunnel priority, supporting specDSCP and specCOS and dscp2dscp and dscp2cos and cos2cos and cos2dscp.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	specCOS(1), specDSCP(2), cos2cos(3), cos2dscp(4), dscp2cos(5), dscp2dscp(6)

hwWlanUpTunnelPrioritySpecValue		1.3.6.1.4.1.2011.6.139.5.2.1.24
Designate the up tunnel priority value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue0MapUpTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.25
The mapping value of the up tunnel priority from priority value 0.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue1MapUpTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.26
The mapping value of the up tunnel priority from priority value 1.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue2MapUpTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.27
The mapping value of the up tunnel priority from priority value 2.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue3MapUpTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.28
The mapping value of the up tunnel priority from priority value 3.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue4MapUpTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.29
The mapping value of the up tunnel priority from priority value 4.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue5MapUpTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.30
The mapping value of the up tunnel priority from priority value 5.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue6MapUpTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.31
The mapping value of the up tunnel priority from priority value 6.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue7MapUpTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.32
The mapping value of the up tunnel priority from priority value 7.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanDownTunnelPriorityMapMode		1.3.6.1.4.1.2011.6.139.5.2.1.33
The mapping mode to down tunnel priority, supporting specDSCP and specCOS and dscp2dscp and dscp2cos and cos2cos and cos2dscp.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	specCOS(1), specDSCP(2), cos2cos(3), cos2dscp(4), dscp2cos(5), dscp2dscp(6)

hwWlanDownTunnelPrioritySpecValue		1.3.6.1.4.1.2011.6.139.5.2.1.34
Designate the down tunnel priority value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue0MapDownTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.35
The mapping value of the down tunnel priority from priority value 0.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue1MapDownTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.36
The mapping value of the down tunnel priority from priority value 1.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue2MapDownTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.37
The mapping value of the down tunnel priority from priority value 2.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue3MapDownTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.38
The mapping value of the down tunnel priority from priority value 3.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue4MapDownTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.39
The mapping value of the down tunnel priority from priority value 4.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue5MapDownTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.40
The mapping value of the down tunnel priority from priority value 5.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue6MapDownTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.41
The mapping value of the down tunnel priority from priority value 6.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanValue7MapDownTunnelPriority		1.3.6.1.4.1.2011.6.139.5.2.1.42
The mapping value of the down tunnel priority from priority value 7.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwWlanClientDownLimitRate		1.3.6.1.4.1.2011.6.139.5.2.1.43
The down limit rate of client.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hwWlanVAPDownLimitRate		1.3.6.1.4.1.2011.6.139.5.2.1.44
The down limit rate of VAP.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hwWlanTos0MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.45
The mapping user-priority value from tos priority value 0.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanTos1MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.46
The mapping user-priority value from tos priority value 1.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanTos2MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.47
The mapping user-priority value from tos priority value 2.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanTos3MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.48
The mapping user-priority value from tos priority value 3.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanTos4MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.49
The mapping user-priority value from tos priority value 4.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanTos5MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.50
The mapping user-priority value from tos priority value 5.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanTos6MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.51
The mapping user-priority value from tos priority value 6.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanTos7MapUPValue		1.3.6.1.4.1.2011.6.139.5.2.1.52
The mapping user-priority value from 802.1p priority value 7.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..7

hwWlanBatchWmmProfileStartNumber		1.3.6.1.4.1.2011.6.139.5.3
The wmm-profile start number in batch operation. This node is used with node hwWlanBatchWmmProfileGetNumber, for example, hwWlanBatchWmmProfileStartNumber is set to one, and hwWlanBatchWmmProfileGetNumber is set to three, then get the node hwWlanBatchWmmProfileReturnNumber, hwWlanBatchWmmProfileName, that means start from the first wmm-profile, get three wmm-profile's name . if it dose not exist three wmm-profile, the hwWlanBatchWmmProfileReturnNumber will be the real wmm-profile number, otherwise, it is equal to hwWlanBatchWmmProfileGetNumber.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..32

hwWlanBatchWmmProfileGetNumber		1.3.6.1.4.1.2011.6.139.5.4
The wmm-profile number that want to get in batch operation.This node is used with node hwWlanBatchWmmProfileStartNumber, for example, hwWlanBatchWmmProfileStartNumber is set to one, and hwWlanBatchWmmProfileGetNumber is set to three, then get the node hwWlanBatchWmmProfileReturnNumber, hwWlanBatchWmmProfileName, that means start from the first wmm-profile, get three wmm-profile's name . if it dose not exist three wmm-profile, the hwWlanBatchWmmProfileReturnNumber will be the real wmm-profile number, otherwise, it is equal to hwWlanBatchWmmProfileGetNumber.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..32

hwWlanBatchWmmProfileReturnNumber		1.3.6.1.4.1.2011.6.139.5.5
The wmm-profile number get in batch operation.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWlanBatchWmmProfileName		1.3.6.1.4.1.2011.6.139.5.6
The names of wmm-profiles which are determined by node hwWlanBatchWmmProfileStartNumber and node hwWlanBatchWmmProfileGetNumber. each wmm-profile name is divided by '?'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwWlanBatchTrafficProfileStartNumber		1.3.6.1.4.1.2011.6.139.5.7
The traffic-profile start number in batch operation. This node is used with node hwWlanBatchTrafficProfileGetNumber, for example, hwWlanBatchTrafficProfileStartNumber is set to one, and hwWlanBatchTrafficProfileGetNumber is set to three, then get the node hwWlanBatchTrafficProfileReturnNumber, hwWlanBatchTrafficProfileName, that means start from the first traffic-profile, get three traffic-profile's name . if it dose not exist three traffic-profile, the hwWlanBatchTrafficProfileReturnNumber will be the real traffic-profile number, otherwise, it is equal to hwWlanBatchTrafficProfileGetNumber.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..32

hwWlanBatchTrafficProfileGetNumber		1.3.6.1.4.1.2011.6.139.5.8
The traffic-profile number that want to get in batch operation.This node is used with node hwWlanBatchTrafficProfileStartNumber, for example, hwWlanBatchTrafficProfileStartNumber is set to one, and hwWlanBatchTrafficProfileGetNumber is set to three, then get the node hwWlanBatchTrafficProfileReturnNumber, hwWlanBatchTrafficProfileName, that means start from the first traffic-profile, get three traffic-profile's name . if it dose not exist three traffic-profile, the hwWlanBatchTrafficProfileReturnNumber will be the real traffic-profile number, otherwise, it is equal to hwWlanBatchTrafficProfileGetNumber.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..32

hwWlanBatchTrafficProfileReturnNumber		1.3.6.1.4.1.2011.6.139.5.9
The traffic-profile number get in batch operation.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwWlanBatchTrafficProfileName		1.3.6.1.4.1.2011.6.139.5.10
The names of traffic-profiles which are determined by node hwWlanBatchTrafficProfileStartNumber and node hwWlanBatchTrafficProfileGetNumber. each traffic-profile name is divided by '?'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwWlanQosManagementObjects		1.3.6.1.4.1.2011.6.139.5.11
OBJECT IDENTIFIER

hwWlanQosManagementConformance		1.3.6.1.4.1.2011.6.139.5.12
OBJECT IDENTIFIER

hwWlanQosManagementCompliances		1.3.6.1.4.1.2011.6.139.5.12.1
OBJECT IDENTIFIER

hwWlanQosManagementCompliance		1.3.6.1.4.1.2011.6.139.5.12.1.1
Description.
Status: current	Access: read-only
MODULE-COMPLIANCE

hwWlanQosManagementObjectGroups		1.3.6.1.4.1.2011.6.139.5.12.2
OBJECT IDENTIFIER

hwWlanWmmProfileGroup		1.3.6.1.4.1.2011.6.139.5.12.2.1
Description.
Status: current	Access: read-only
OBJECT-GROUP

hwWlanTrafficProfileGroup		1.3.6.1.4.1.2011.6.139.5.12.2.2
Description.
Status: current	Access: read-only
OBJECT-GROUP

hwWlanQosManagementGroup		1.3.6.1.4.1.2011.6.139.5.12.2.3
Description.
Status: current	Access: read-only
OBJECT-GROUP