HUAWEI-WLAN-AP-MIB

File: HUAWEI-WLAN-AP-MIB.mib (140073 bytes)

Imported modules

HUAWEI-WLAN-MIB SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

hwWlan OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP IpAddress Integer32
Unsigned32 Counter64 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE MacAddress
RowStatus DateAndTime

Defined Types

HwWlanApTypeEntry  
SEQUENCE    
  hwWlanApType OCTET STRING
  hwWlanApTypeDesc OCTET STRING
  hwWlanApTypeWiredPortNum Integer32
  hwWlanApTypeRadioNum Integer32
  hwWlanApTypeMaxStaNum Integer32
  hwWlanApTypeReset Integer32

HwWlanApTypeRadioEntry  
SEQUENCE    
  hwWlanApTypeRadioIndex Integer32
  hwWlanApTypeRadioType INTEGER
  hwWlanRadioMaxSpatialStreamsNum Unsigned32
  hwWlanApTypeRadioAntennaGain Integer32
  hwWlanApTypeRadioMaxVAPNum Unsigned32

HwWlanApTypeWiredPortEntry  
SEQUENCE    
  hwWlanApTypeWiredPortIndex Integer32
  hwWlanApTypeWiredPortType INTEGER
  hwWlanApTypeWiredPortName OCTET STRING

HwWlanUnauthedApRecordEntry  
SEQUENCE    
  hwWlanUnauthedApRecordIndex Integer32
  hwWlanUnauthedApType OCTET STRING
  hwWlanUnauthedApMacAddress MacAddress
  hwWlanUnauthedApSn OCTET STRING
  hwWlanUnauthedApIpAddress IpAddress
  hwWlanUnauthedApRecordTime DateAndTime

HwWlanApEntry  
SEQUENCE    
  hwWlanApMac MacAddress
  hwWlanApSn OCTET STRING
  hwWlanApTypeInfo OCTET STRING
  hwWlanApName OCTET STRING
  hwWlanApGroup OCTET STRING
  hwWlanApRunState INTEGER
  hwWlanApSoftwareVersion OCTET STRING
  hwWlanApHardwareVersion OCTET STRING
  hwWlanApCpuType OCTET STRING
  hwWlanApCpufrequency Integer32
  hwWlanApMemoryType OCTET STRING
  hwWlanApDomain OCTET STRING
  hwWlanApIpAddress IpAddress
  hwWlanApIpNetMask IpAddress
  hwWlanApGatewayIp IpAddress
  hwWlanApMemorySize Integer32
  hwWlanApFlashSize Integer32
  hwWlanApRunTime Unsigned32
  hwWlanApAdminOper INTEGER
  hwWlanApDNS IpAddress
  hwWlanApOnlineTime Unsigned32
  hwWlanApSysSoftwareDesc OCTET STRING
  hwWlanApSysHardtwareDesc OCTET STRING
  hwWlanApSysManufacture OCTET STRING
  hwWlanApSysSoftwareName OCTET STRING
  hwWlanApSysSoftwareVendor OCTET STRING
  hwWlanApBomCode OCTET STRING
  hwWlanApIpv6Address OCTET STRING
  hwWlanApIpv6NetMask OCTET STRING
  hwWlanApGatewayIpv6 OCTET STRING
  hwWlanApIpv6DNS OCTET STRING
  hwWlanApProtectAcIPv6Addr OCTET STRING
  hwWlanApBootCountTotal Integer32
  hwWlanApBootCountPowerOff Integer32
  hwWlanApBootCountClear RowStatus
  hwWlanApElectronicLabel OCTET STRING
  hwWlanApWiredPortNum Integer32
  hwWlanApWiredPortMtu Integer32
  hwWlanApWiredPortMac MacAddress
  hwWlanApMemoryUseRate Integer32
  hwWlanApCpuUseRate Integer32
  hwWlanApFlashFreeSize Integer32
  hwWlanApTemperature Integer32
  hwWlanApOnlineUserNum Integer32
  hwWlanApDualBandAssoc5gStaNum Unsigned32
  hwWlanApDualBandStaNum Unsigned32
  hwWlanApStaOnlineFailRatio Unsigned32
  hwWlanApStaOfflineRatio Unsigned32
  hwWlanApStickyClientRatio Unsigned32
  hwWlanApUpEthPortSpeed INTEGER
  hwWlanApUpEthPortSpeedMode INTEGER
  hwWlanApUpEthPortDuplex INTEGER
  hwWlanApUpEthPortDuplexMode INTEGER
  hwWlanApUpPortSpeed Integer32
  hwWlanAPUpPortPER Integer32
  hwWlanEthportUpRate Integer32
  hwWlanEthportDownRate Integer32
  hwWlanApAirportUpTraffic OCTET STRING
  hwWlanApAirportDwTraffic OCTET STRING
  hwWlanApEthportDwTraffic OCTET STRING
  hwWlanApEthportUpTraffic OCTET STRING
  hwWlanApUpPortRecvPackets Counter64
  hwWlanApUpPortSendPackets Counter64
  hwWlanApRowstatus RowStatus
  hwWlanApUpPortRecvBytes Counter64
  hwWlanApUpPortSendBytes Counter64
  hwWlanApId Unsigned32
  hwWlanCentralApId Unsigned32
  hwWlanCentralApMac MacAddress
  hwWlanCentralApName OCTET STRING
  hwWlanApSDCardSize Integer32
  hwWlanAPLongitude OCTET STRING
  hwWlanAPLatitude OCTET STRING

HwWlanApWiredPortEntry  
SEQUENCE    
  hwWlanApWiredPortIndex Integer32
  hwWlanApWiredPortType INTEGER
  hwWlanApWiredPortDesc OCTET STRING
  hwWlanApWiredPortState INTEGER
  hwWlanApWiredPortSpeed Integer32
  hwWlanApMultiWiredPortDuplex INTEGER
  hwWlanApMultiWiredPortNegotiation INTEGER
  hwWlanApMultiWiredPortMode INTEGER
  hwWlanApWiredPortApId Unsigned32
  hwWlanApWiredPortApName OCTET STRING

HwWlanApWiredPortStatEntry  
SEQUENCE    
  hwWlanApWiredPortStatClear Integer32
  hwWlanApWiredPortUpDwnTimes Unsigned32
  hwWlanApWiredPortInPkts Counter64
  hwWlanApWiredPortInUnicastPkts Counter64
  hwWlanApWiredPortInNonUnicastPkts Counter64
  hwWlanApWiredPortInBytes Counter64
  hwWlanApWiredPortInErrorPkts Counter64
  hwWlanApWiredPortInDiscardPkts Counter64
  hwWlanApWiredPortOutPkts Counter64
  hwWlanApWiredPortOutUnicastPkts Counter64
  hwWlanApWiredPortOutNonUnicastPkts Counter64
  hwWlanApWiredPortOutBytes Counter64
  hwWlanApWiredPortOutErrorsPkts Counter64
  hwWlanApWiredPortOutDiscardPkts Counter64

HwWlanApWiredPortLldpEntry  
SEQUENCE    
  hwWlanApWiredPortLldpRemLocalPortNum Integer32
  hwWlanApWiredPortLldpRemIndex Integer32
  hwWlanApWiredPortLldpRemChassisIdSubtype Integer32
  hwWlanApWiredPortLldpRemChassisId OCTET STRING
  hwWlanApWiredPortLldpRemPortIdSubtype Integer32
  hwWlanApWiredPortLldpRemPortId OCTET STRING
  hwWlanApWiredPortLldpRemPortDesc OCTET STRING
  hwWlanApWiredPortLldpRemSysName OCTET STRING
  hwWlanApWiredPortLldpRemSysDesc OCTET STRING
  hwWlanApWiredPortLldpRemSysCapSupported Integer32
  hwWlanApWiredPortLldpRemSysCapEnabled Integer32
  hwWlanApWiredPortLldpRemLocalApId Unsigned32

HwWlanApWiredPortLldpRemManAddrEntry  
SEQUENCE    
  hwWlanApWiredPortLldpRemManAddrSubtype Integer32
  hwWlanApWiredPortLldpRemManAddr OCTET STRING
  hwWlanApWiredPortLldpRemManAddrIfSubtype Integer32
  hwWlanApWiredPortLldpRemManAddrIfId Integer32
  hwWlanApWiredPortLldpRemManAddrOID OCTET STRING

HwWlanApOnlineFailEntry  
SEQUENCE    
  hwWlanApOnlineFailMac MacAddress
  hwWlanApOnlineFailTime OCTET STRING
  hwWlanApOnlineFailReason OCTET STRING
  hwWlanApOnlineFailRowStatus RowStatus

HwWlanApOfflineEntry  
SEQUENCE    
  hwWlanApOfflineMac MacAddress
  hwWlanApOfflineTime OCTET STRING
  hwWlanApOfflineReason OCTET STRING
  hwWlanApOfflineRowStatus RowStatus

HwWlanIDIndexedApEntry  
SEQUENCE    
  hwWlanIDIndexedApId Unsigned32
  hwWlanIDIndexedApMac MacAddress
  hwWlanIDIndexedApSn OCTET STRING
  hwWlanIDIndexedApTypeInfo OCTET STRING
  hwWlanIDIndexedApName OCTET STRING
  hwWlanIDIndexedApGroup OCTET STRING
  hwWlanIDIndexedApRunState INTEGER
  hwWlanIDIndexedApSoftwareVersion OCTET STRING
  hwWlanIDIndexedApHardwareVersion OCTET STRING
  hwWlanIDIndexedApCpuType OCTET STRING
  hwWlanIDIndexedApCpufrequency Integer32
  hwWlanIDIndexedApMemoryType OCTET STRING
  hwWlanIDIndexedApDomain OCTET STRING
  hwWlanIDIndexedApIpAddress IpAddress
  hwWlanIDIndexedApIpNetMask IpAddress
  hwWlanIDIndexedApGatewayIp IpAddress
  hwWlanIDIndexedApMemorySize Integer32
  hwWlanIDIndexedApFlashSize Integer32
  hwWlanIDIndexedApRunTime Unsigned32
  hwWlanIDIndexedApAdminOper INTEGER
  hwWlanIDIndexedApDNS IpAddress
  hwWlanIDIndexedApOnlineTime Unsigned32
  hwWlanIDIndexedApSysSoftwareDesc OCTET STRING
  hwWlanIDIndexedApSysHardtwareDesc OCTET STRING
  hwWlanIDIndexedApSysManufacture OCTET STRING
  hwWlanIDIndexedApSysSoftwareName OCTET STRING
  hwWlanIDIndexedApSysSoftwareVendor OCTET STRING
  hwWlanIDIndexedApBomCode OCTET STRING
  hwWlanIDIndexedApIpv6Address OCTET STRING
  hwWlanIDIndexedApIpv6NetMask OCTET STRING
  hwWlanIDIndexedApGatewayIpv6 OCTET STRING
  hwWlanIDIndexedApIpv6DNS OCTET STRING
  hwWlanIDIndexedApProtectAcIPv6Addr OCTET STRING
  hwWlanIDIndexedApBootCountTotal Integer32
  hwWlanIDIndexedApBootCountPowerOff Integer32
  hwWlanIDIndexedApBootCountClear RowStatus
  hwWlanIDIndexedApElectronicLabel OCTET STRING
  hwWlanIDIndexedApWiredPortNum Integer32
  hwWlanIDIndexedApWiredPortMtu Integer32
  hwWlanIDIndexedApWiredPortMac MacAddress
  hwWlanIDIndexedApMemoryUseRate Integer32
  hwWlanIDIndexedApCpuUseRate Integer32
  hwWlanIDIndexedApFlashFreeSize Integer32
  hwWlanIDIndexedApTemperature Integer32
  hwWlanIDIndexedApOnlineUserNum Integer32
  hwWlanIDIndexedApDualBandAssoc5gStaNum Unsigned32
  hwWlanIDIndexedApDualBandStaNum Unsigned32
  hwWlanIDIndexedApStaOnlineFailRatio Unsigned32
  hwWlanIDIndexedApStaOfflineRatio Unsigned32
  hwWlanIDIndexedApStickyClientRatio Unsigned32
  hwWlanIDIndexedApUpEthPortSpeed INTEGER
  hwWlanIDIndexedApUpEthPortSpeedMode INTEGER
  hwWlanIDIndexedApUpEthPortDuplex INTEGER
  hwWlanIDIndexedApUpEthPortDuplexMode INTEGER
  hwWlanIDIndexedApUpPortSpeed Integer32
  hwWlanIDIndexedAPUpPortPER Integer32
  hwWlanIDIndexedEthportUpRate Integer32
  hwWlanIDIndexedEthportDownRate Integer32
  hwWlanIDIndexedApAirportUpTraffic OCTET STRING
  hwWlanIDIndexedApAirportDwTraffic OCTET STRING
  hwWlanIDIndexedApEthportDwTraffic OCTET STRING
  hwWlanIDIndexedApEthportUpTraffic OCTET STRING
  hwWlanIDIndexedApUpPortRecvPackets Counter64
  hwWlanIDIndexedApUpPortSendPackets Counter64
  hwWlanIDIndexedApUpPortRecvBytes Counter64
  hwWlanIDIndexedApUpPortSendBytes Counter64
  hwWlanIDIndexedCentralApId Unsigned32
  hwWlanIDIndexedCentralApMac MacAddress
  hwWlanIDIndexedCentralApName OCTET STRING
  hwWlanIDIndexedApRowstatus RowStatus
  hwWlanIDIndexedApSDCardSize Integer32
  hwWlanIDIndexedAPLongitude OCTET STRING
  hwWlanIDIndexedAPLatitude OCTET STRING

Defined Values

hwWlanAp 1.3.6.1.4.1.2011.6.139.13
V1.31, add hwApConfigInconsistWithActualTrap trap node.
MODULE-IDENTITY    

hwWlanApTrapInfo 1.3.6.1.4.1.2011.6.139.13.1
OBJECT IDENTIFIER    

hwWlanApTrap 1.3.6.1.4.1.2011.6.139.13.1.1
OBJECT IDENTIFIER    

hwApFaultTrap 1.3.6.1.4.1.2011.6.139.13.1.1.1
The object indicates an AP communication fault alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApNormalTrap 1.3.6.1.4.1.2011.6.139.13.1.1.2
This object indicates an AP communication fault clear alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPingResultTrap 1.3.6.1.4.1.2011.6.139.13.1.1.3
This object indicates an AP ping result alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApConfigCommitTrap 1.3.6.1.4.1.2011.6.139.13.1.1.4
This object indicates that the configuration of an AP is successfully committed.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwUnAuthorizedApRecordExistTrap 1.3.6.1.4.1.2011.6.139.13.1.1.5
This object indicates that unauthorized AP alarms exist.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwUnAuthorizedApRecordClearTrap 1.3.6.1.4.1.2011.6.139.13.1.1.6
This object indicates that unauthorized AP alarms are cleared.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApCpuOverloadTrap 1.3.6.1.4.1.2011.6.139.13.1.1.7
This object indicates that the CPU usage of an AP exceeds the upper threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApCpuOverloadRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.8
This object indicates that an AP's CPU usage restores to the allowed range.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApMemoryOverloadTrap 1.3.6.1.4.1.2011.6.139.13.1.1.9
This object indicates that the memory usage of an AP exceeds the upper threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApMemoryOverloadRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.10
This object indicates that the memory usage of an AP restores to the allowed range.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApStaFullTrap 1.3.6.1.4.1.2011.6.139.13.1.1.11
This object indicates that new STAs cannot associate with an AP.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApStaFullRecoverTrap 1.3.6.1.4.1.2011.6.139.13.1.1.12
This object indicates that new STAs can associate with an AP.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwAcDevicesSwitchTrap 1.3.6.1.4.1.2011.6.139.13.1.1.13
This object that an active/standby AC switchover occurs.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwDyingGaspTrap 1.3.6.1.4.1.2011.6.139.13.1.1.14
This object indicates a dying gasp alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFaultTrapFat 1.3.6.1.4.1.2011.6.139.13.1.1.15
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApNormalTrapFat 1.3.6.1.4.1.2011.6.139.13.1.1.16
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApTemperatureTooLowTrap 1.3.6.1.4.1.2011.6.139.13.1.1.17
This object indicates that the temperature is too low.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApTemperatureTooLowRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.18
This object indicates that the temperature restores to the normal range.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApTemperatureTooHighTrap 1.3.6.1.4.1.2011.6.139.13.1.1.19
This object indicates that the temperature is too high.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApTemperatureTooHighRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.20
This object indicates that the temperature restores to the normal range.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalRxPowerTooHighTrap 1.3.6.1.4.1.2011.6.139.13.1.1.21
This object indicates that the receive power of an AP's optical module is too high.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalRxPowerTooHighRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.22
This object indicates that the receive power of an AP's optical module restores to the normal range.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalRxPowerTooLowTrap 1.3.6.1.4.1.2011.6.139.13.1.1.23
This object indicates that the receive power of an AP's optical module is too low.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalRxPowerTooLowRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.24
This object indicates that the receive power of an AP's optical module restores to the normal range.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalTemperatureTooHighTrap 1.3.6.1.4.1.2011.6.139.13.1.1.25
This object indicates that the temperature of an AP's optical module is too high.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalTemperatureTooHighRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.26
This object indicates that the temperature of an AP's optical module restores to the normal range.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalTemperatureTooLowTrap 1.3.6.1.4.1.2011.6.139.13.1.1.27
This object indicates that the temperature of an AP's optical module is too low.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalTemperatureTooLowRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.28
This object indicates that the temperature of an AP's optical module restores to the normal range.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApNotSupportCountryCodeTrap 1.3.6.1.4.1.2011.6.139.13.1.1.29
This object indicates that the country code is not supported.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApColdBootTrap 1.3.6.1.4.1.2011.6.139.13.1.1.30
This object indicates a cold restart alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApColdBootRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.31
This object indicates a cold restart clear alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApHotBootTrap 1.3.6.1.4.1.2011.6.139.13.1.1.32
This object indicates a hot restart alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApHotBootRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.33
This object indicates a hot restart clear alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApCRCTooHighTrap 1.3.6.1.4.1.2011.6.139.13.1.1.34
This object indicates a CRC error alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApCRCTooHighRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.35
This object indicates that CRC error alarms are cleared.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApConflictApNameTrap 1.3.6.1.4.1.2011.6.139.13.1.1.36
This object indicates an alarm of AP name conflict.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApLicenseTrap 1.3.6.1.4.1.2011.6.139.13.1.1.37
This object indicates an AP license resource exhaustion alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFmeaIICFaultTrap 1.3.6.1.4.1.2011.6.139.13.1.1.38
This object indicates an FMEA IIC fault alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFmeaIICFaultRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.39
This object indicates that the FMEA IIC fault alarm is cleared.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFmeaPHYFaultTrap 1.3.6.1.4.1.2011.6.139.13.1.1.40
This object indicates an FMEA PHY fault alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFmeaPHYFaultRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.41
This object indicates that the FMEA PHY fault alarm is cleared.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFmeaFaultTrap 1.3.6.1.4.1.2011.6.139.13.1.1.42
This object indicates an FMEA fault alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFmeaFaultRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.43
This object indicates that the FMEA fault alarm is cleared.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalInsertTrap 1.3.6.1.4.1.2011.6.139.13.1.1.44
This object indicates an alarm that is generated when an optical module is installed.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalRemoveTrap 1.3.6.1.4.1.2011.6.139.13.1.1.45
This object indicates an alarm generated due to installation of an optical module is cleared.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApReceivedInvalidArpNewTrap 1.3.6.1.4.1.2011.6.139.13.1.1.46
This object indicates that invalid ARP packets are received.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApVersionMismatchTrap 1.3.6.1.4.1.2011.6.139.13.1.1.47
This object indicates that the AP version and the AC version do not match.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioUploadRemoteCaptureFileTrap 1.3.6.1.4.1.2011.6.139.13.1.1.48
This object indicates the alarm on the remote capture result upload result.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwMPJoinedOnEthernetTrap 1.3.6.1.4.1.2011.6.139.13.1.1.49
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwMPJoinedOnEthernetRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.50
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwMPPJoinedOnAirTrap 1.3.6.1.4.1.2011.6.139.13.1.1.51
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwMPPJoinedOnAirRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.52
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalTxPowerTooHighTrap 1.3.6.1.4.1.2011.6.139.13.1.1.53
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalTxPowerTooHighRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.54
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalTxPowerTooLowTrap 1.3.6.1.4.1.2011.6.139.13.1.1.55
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalTxPowerTooLowRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.56
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOnLineNumExceedCardSpecTrap 1.3.6.1.4.1.2011.6.139.13.1.1.57
This object indicates the number of online APs on the card has exceeded the maximum value.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFanInvalidTrap 1.3.6.1.4.1.2011.6.139.13.1.1.58
This object indicates a complete failure of a fan.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApFanInvalidRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.59
This object indicates that the complete failure of a fan has been rectified.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApStorageDevRemoveTrap 1.3.6.1.4.1.2011.6.139.13.1.1.60
This object indicates that the storage card is removed.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApStorageDevInsertTrap 1.3.6.1.4.1.2011.6.139.13.1.1.61
This object indicates that the storage card is installed.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPoePowerOffTrap 1.3.6.1.4.1.2011.6.139.13.1.1.62
This object indicates that a port is powered off.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPoePowerOnTrap 1.3.6.1.4.1.2011.6.139.13.1.1.63
This object indicates that a port is powered on.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPoePdConnectedTrap 1.3.6.1.4.1.2011.6.139.13.1.1.64
This object indicates that a port detects a PD connected to it.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPoePdDisconnectedTrap 1.3.6.1.4.1.2011.6.139.13.1.1.65
This object indicates that a port detects disconnection of the attached PD.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPoePdClassOvercurrentTrap 1.3.6.1.4.1.2011.6.139.13.1.1.66
This object indicates that a port detects a PD whose current exceeds the threshold of the corresponding class.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPoePdPriorityDifferentTrap 1.3.6.1.4.1.2011.6.139.13.1.1.67
This object indicates that the priority configured on a port is different from the PD priority.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPoePowerOverUtilizationThresholdTrap 1.3.6.1.4.1.2011.6.139.13.1.1.68
This object indicates that the load power of a PoE slot exceeds the upper limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApPoePowerOverUtilizationThresholdRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.69
This object indicates that the load power of a PoE slot has fallen below the upper limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApSTPAutoShutdownTrap 1.3.6.1.4.1.2011.6.139.13.1.1.70
This object indicates that STP detected a loop and shut down the port based on configuration.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApSTPAutoShutdownRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.71
This object indicates that the shutdown port has recovered.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalInvalidTrap 1.3.6.1.4.1.2011.6.139.13.1.1.72
This object indicates that the optical transceiver does not work normally.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApOpticalInvalidRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.73
This object indicates that the optical transceiver has restored.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApVapStaFullTrap 1.3.6.1.4.1.2011.6.139.13.1.1.74
This object indicates that new STAs cannot associate with an VAP.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwVapStaFullRecoverTrap 1.3.6.1.4.1.2011.6.139.13.1.1.75
This object indicates that new STAs can associate with an VAP.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWlanBLELowPowerTrap 1.3.6.1.4.1.2011.6.139.13.1.1.76
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWlanBLELowPowerRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.77
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWlanBLEOfflineTrap 1.3.6.1.4.1.2011.6.139.13.1.1.78
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWlanBLEOfflineRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.79
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWlanBLEFaultyTrap 1.3.6.1.4.1.2011.6.139.13.1.1.80
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWlanBLEFaultyRestoreTrap 1.3.6.1.4.1.2011.6.139.13.1.1.81
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwAPIoTCardInsertTrap 1.3.6.1.4.1.2011.6.139.13.1.1.82
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwAPIoTCardRemoveTrap 1.3.6.1.4.1.2011.6.139.13.1.1.83
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwAPIoTServerStartFailTrap 1.3.6.1.4.1.2011.6.139.13.1.1.84
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwAPIoTServerStartFailResumeTrap 1.3.6.1.4.1.2011.6.139.13.1.1.85
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWlanApSubFirmwareMismatchTrap 1.3.6.1.4.1.2011.6.139.13.1.1.86
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApSpecificConfigChangedTrap 1.3.6.1.4.1.2011.6.139.13.1.1.87
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApConfigInconsistWithActualTrap 1.3.6.1.4.1.2011.6.139.13.1.1.88
This alarm is generated when a the AP config is inconsistent with the actual attribute.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWlanApTrapObjects 1.3.6.1.4.1.2011.6.139.13.1.2
OBJECT IDENTIFIER    

hwWlanApActualType 1.3.6.1.4.1.2011.6.139.13.1.2.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApCpuOccupancyRate 1.3.6.1.4.1.2011.6.139.13.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApMemoryOccupancyRate 1.3.6.1.4.1.2011.6.139.13.1.2.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApPermitStaNum 1.3.6.1.4.1.2011.6.139.13.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanStaAuthFailCause 1.3.6.1.4.1.2011.6.139.13.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanAcSystemSwitchType 1.3.6.1.4.1.2011.6.139.13.1.2.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApOpticalRxPower 1.3.6.1.4.1.2011.6.139.13.1.2.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApOpticalTemperature 1.3.6.1.4.1.2011.6.139.13.1.2.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApCfgCountryCode 1.3.6.1.4.1.2011.6.139.13.1.2.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApArpAttackSrcMac 1.3.6.1.4.1.2011.6.139.13.1.2.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanApArpAttackDstMac 1.3.6.1.4.1.2011.6.139.13.1.2.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanApArpAttackSrcIP 1.3.6.1.4.1.2011.6.139.13.1.2.12
Description.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanApArpCfgRateThreshold 1.3.6.1.4.1.2011.6.139.13.1.2.13
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApArpActualRate 1.3.6.1.4.1.2011.6.139.13.1.2.14
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApNotifyRadioId 1.3.6.1.4.1.2011.6.139.13.1.2.15
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApNotifyOrRestoreTemperature 1.3.6.1.4.1.2011.6.139.13.1.2.16
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanOccurTime 1.3.6.1.4.1.2011.6.139.13.1.2.17
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApBootNotifyName 1.3.6.1.4.1.2011.6.139.13.1.2.18
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApFaultTimes 1.3.6.1.4.1.2011.6.139.13.1.2.19
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApUnAuthorizedApRecordNumber 1.3.6.1.4.1.2011.6.139.13.1.2.20
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanCrcErrActual 1.3.6.1.4.1.2011.6.139.13.1.2.21
CRC error alarm threshold value.The unit is 1/10000.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanCrcThreshold 1.3.6.1.4.1.2011.6.139.13.1.2.22
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApNotifyWlanId 1.3.6.1.4.1.2011.6.139.13.1.2.23
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApLicenseInfo 1.3.6.1.4.1.2011.6.139.13.1.2.24
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanCrcPortType 1.3.6.1.4.1.2011.6.139.13.1.2.25
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanCrcPortID 1.3.6.1.4.1.2011.6.139.13.1.2.26
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApArpAttackDropNum 1.3.6.1.4.1.2011.6.139.13.1.2.27
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApFaultID 1.3.6.1.4.1.2011.6.139.13.1.2.28
This object indicates an FMEA fault alarm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApIfIndex 1.3.6.1.4.1.2011.6.139.13.1.2.29
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApFaultInfo 1.3.6.1.4.1.2011.6.139.13.1.2.30
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApSoftWareVersion 1.3.6.1.4.1.2011.6.139.13.1.2.31
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioUploadRemoteCaptureResult 1.3.6.1.4.1.2011.6.139.13.1.2.32
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApRadioID 1.3.6.1.4.1.2011.6.139.13.1.2.33
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApCpuOverloadDescInfo 1.3.6.1.4.1.2011.6.139.13.1.2.34
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApOpticalTxPower 1.3.6.1.4.1.2011.6.139.13.1.2.35
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanSlotNum 1.3.6.1.4.1.2011.6.139.13.1.2.36
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwApPoePdPriority 1.3.6.1.4.1.2011.6.139.13.1.2.37
This object identifies the PD priority.The default value is low.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER critical(1), high(2), low(3)  

hwApPoePortPriority 1.3.6.1.4.1.2011.6.139.13.1.2.38
This object identifies the priority of an interface.The default value is low.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER critical(1), high(2), low(3)  

hwApPoeCurConsumPower 1.3.6.1.4.1.2011.6.139.13.1.2.39
This object identifies the current consuming power.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwApPoeConsumPowerThreshold 1.3.6.1.4.1.2011.6.139.13.1.2.40
This object identifies the threshold of consuming power.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwApFanIndex 1.3.6.1.4.1.2011.6.139.13.1.2.41
This object identifies the id of fan.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwApEntityPhysicalName 1.3.6.1.4.1.2011.6.139.13.1.2.42
This object identifies the phisical name of entity name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwApStorageIndex 1.3.6.1.4.1.2011.6.139.13.1.2.43
This object identifies the id of Storage.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwApStorageName 1.3.6.1.4.1.2011.6.139.13.1.2.44
This object identifies the name of Storage.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwWlanApOpticalFaultID 1.3.6.1.4.1.2011.6.139.13.1.2.45
This object identifies the error corde of the optical transceiver fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwWlanApWlanID 1.3.6.1.4.1.2011.6.139.13.1.2.46
This object identifies the Wlan Id of the Vap that has the max number of stations.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanBLEMacAddr 1.3.6.1.4.1.2011.6.139.13.1.2.47
Description.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanApUdp 1.3.6.1.4.1.2011.6.139.13.1.2.48
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwSubFirmwareName 1.3.6.1.4.1.2011.6.139.13.1.2.49
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwSubFirmware 1.3.6.1.4.1.2011.6.139.13.1.2.50
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwRealVersion 1.3.6.1.4.1.2011.6.139.13.1.2.51
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwExpectVersion 1.3.6.1.4.1.2011.6.139.13.1.2.52
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwWlanApIotCardId 1.3.6.1.4.1.2011.6.139.13.1.2.53
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwPowerOffReason 1.3.6.1.4.1.2011.6.139.13.1.2.54
This object identifies the reason of power off.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwApSpecificChangeConfig 1.3.6.1.4.1.2011.6.139.13.1.2.55
This object identifies the config of change.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwApSpecificChangeReason 1.3.6.1.4.1.2011.6.139.13.1.2.56
This object identifies the reason of change config.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwApInconsisitConfig 1.3.6.1.4.1.2011.6.139.13.1.2.57
This object identifies the inconsistent config.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwApConfigInconsisitReason 1.3.6.1.4.1.2011.6.139.13.1.2.58
This object identifies the reason of inconsistent config.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwWlanApTypeObjects 1.3.6.1.4.1.2011.6.139.13.2
OBJECT IDENTIFIER    

hwWlanApTypeTable 1.3.6.1.4.1.2011.6.139.13.2.1
This table is used to query attributes based on AP types and restart APs based on AP types.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApTypeEntry

hwWlanApTypeEntry 1.3.6.1.4.1.2011.6.139.13.2.1.1
The index of this table is hwWlanApType.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApTypeEntry  

hwWlanApType 1.3.6.1.4.1.2011.6.139.13.2.1.1.1
This object indicates the AP type name. It is the index of the table.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwWlanApTypeDesc 1.3.6.1.4.1.2011.6.139.13.2.1.1.2
This object indicates description of an AP type.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApTypeWiredPortNum 1.3.6.1.4.1.2011.6.139.13.2.1.1.3
This object indicates the number of wired ports on APs of a certain type.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApTypeRadioNum 1.3.6.1.4.1.2011.6.139.13.2.1.1.4
This object indicates the number of radios on APs of a certain type.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApTypeMaxStaNum 1.3.6.1.4.1.2011.6.139.13.2.1.1.5
This object indicates the maximum number of access STAs on an AP of a certain type.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApTypeReset 1.3.6.1.4.1.2011.6.139.13.2.1.1.6
This object indicates that APs are restarted based on the AP type.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanApTypeRadioTable 1.3.6.1.4.1.2011.6.139.13.2.2
This table is used to query radio-related attributes of APs of a certain type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApTypeRadioEntry

hwWlanApTypeRadioEntry 1.3.6.1.4.1.2011.6.139.13.2.2.1
The indexes of this table are hwWlanApType and hwWlanApTypeRadioIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApTypeRadioEntry  

hwWlanApTypeRadioIndex 1.3.6.1.4.1.2011.6.139.13.2.2.1.1
This object indicates the radio index of APs of a certain type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanApTypeRadioType 1.3.6.1.4.1.2011.6.139.13.2.2.1.2
This object indicates the radio type of APs of a certain type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER wlan80211a(1), wlan80211b(2), wlan80211g(3), wlan80211bg(4), wlan80211an(5), wlan80211bgn(6), wlan80211abgn(7), wlan80211ac(8), wlan80211anac(9)  

hwWlanRadioMaxSpatialStreamsNum 1.3.6.1.4.1.2011.6.139.13.2.2.1.3
This object indicates the maximum number of spatial streams of an AP radio.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApTypeRadioAntennaGain 1.3.6.1.4.1.2011.6.139.13.2.2.1.4
This object indicates that the antenna gain is configured according to the radio ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApTypeRadioMaxVAPNum 1.3.6.1.4.1.2011.6.139.13.2.2.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApTypeWiredPortTable 1.3.6.1.4.1.2011.6.139.13.2.3
This table is used to query wired interface attributes of APs of a certain type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApTypeWiredPortEntry

hwWlanApTypeWiredPortEntry 1.3.6.1.4.1.2011.6.139.13.2.3.1
The indexes of this table are hwWlanApType and hwWlanApTypeWiredPortIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApTypeWiredPortEntry  

hwWlanApTypeWiredPortIndex 1.3.6.1.4.1.2011.6.139.13.2.3.1.1
This object indicates the index of an AP's wired interface. Numbering rule: port-index = port-type * 100 + port-number. For example, the indexes of a wall plate AP's GE0, eth0, and eth1 are 200 (2 * 100 + 0 = 200), 100 (1 * 100 + 0 = 100), and 101 (1 * 100 + 1 = 101) respectively.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanApTypeWiredPortType 1.3.6.1.4.1.2011.6.139.13.2.3.1.2
This object indicates the type of an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fe(1), ge(2), gpon(3), epon(4), adsl2plus(5), ethTrunk(6), multige(7)  

hwWlanApTypeWiredPortName 1.3.6.1.4.1.2011.6.139.13.2.3.1.3
This object indicates the name of a wired interface on APs of a certain type, for example, ethernet 0, ethernet 1, gigabit-ethernet 0, and eth-trunk 0.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApObjects 1.3.6.1.4.1.2011.6.139.13.3
OBJECT IDENTIFIER    

hwWlanApPing 1.3.6.1.4.1.2011.6.139.13.3.1
OBJECT IDENTIFIER    

hwWlanApPingApMac 1.3.6.1.4.1.2011.6.139.13.3.1.1
This object specifies the MAC address in an AP ping operation. If the AP ID and MAC address are specified concurrently, the AP is pinged based on the MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwWlanApPingAddress 1.3.6.1.4.1.2011.6.139.13.3.1.2
This object indicates the domain name or IP address of the destination host.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanApPingCount 1.3.6.1.4.1.2011.6.139.13.3.1.3
This object indicates the number of times ICMP ECHO-REQUEST packets are sent.Default value: 4.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanApPingPacketSize 1.3.6.1.4.1.2011.6.139.13.3.1.4
This object indicates the length of an ECHO-REQUE.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanApPingWaitTime 1.3.6.1.4.1.2011.6.139.13.3.1.5
This object indicates the time to wait before sending the next ICMP Request packet.Unit: ms Default value: 2000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanApPingTimeOut 1.3.6.1.4.1.2011.6.139.13.3.1.6
This object indicates the timeout period for an ECHO-RESPONSE after an ECHO-REQUEST is sent.Unit: ms Default value: 2000.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanApPingResultSuccessCount 1.3.6.1.4.1.2011.6.139.13.3.1.7
This object indicates the number of successful AP ping operations. Only the result of the latest AP ping operation is kept.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApPingResultFailureCount 1.3.6.1.4.1.2011.6.139.13.3.1.8
This object indicates the number of AP ping operation failures. Only the result of the latest AP ping operation is kept.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApPingResultAveResponseTime 1.3.6.1.4.1.2011.6.139.13.3.1.9
This object indicates the average response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApPingResultMinResponseTime 1.3.6.1.4.1.2011.6.139.13.3.1.10
This object indicates the minimum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApPingResultMaxResponseTime 1.3.6.1.4.1.2011.6.139.13.3.1.11
This object indicates the maximum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApPingResultFlag 1.3.6.1.4.1.2011.6.139.13.3.1.12
This object indicates the result of the AP ping operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2)  

hwWlanUnauthedApRecordTable 1.3.6.1.4.1.2011.6.139.13.3.2
This table describes rogue AP records. Rogue APs are those whose MAC addresses and SNs are not in the whitelist and not confirmed after being discovered by the AC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanUnauthedApRecordEntry

hwWlanUnauthedApRecordEntry 1.3.6.1.4.1.2011.6.139.13.3.2.1
The index of this table is hwWlanUnauthedApRecordIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanUnauthedApRecordEntry  

hwWlanUnauthedApRecordIndex 1.3.6.1.4.1.2011.6.139.13.3.2.1.1
This object indicates the index of a rogue AP record.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanUnauthedApType 1.3.6.1.4.1.2011.6.139.13.3.2.1.2
This object indicates the type of a rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanUnauthedApMacAddress 1.3.6.1.4.1.2011.6.139.13.3.2.1.3
This object indicates the type of a rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanUnauthedApSn 1.3.6.1.4.1.2011.6.139.13.3.2.1.4
This object indicates the SN of a rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanUnauthedApIpAddress 1.3.6.1.4.1.2011.6.139.13.3.2.1.5
This object indicates the IP address of a rogue AP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanUnauthedApRecordTime 1.3.6.1.4.1.2011.6.139.13.3.2.1.6
This object indicates the time when a rogue AP is recorded.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwWlanApTable 1.3.6.1.4.1.2011.6.139.13.3.3
This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApEntry

hwWlanApEntry 1.3.6.1.4.1.2011.6.139.13.3.3.1
The index of this table is hwWlanApMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApEntry  

hwWlanApMac 1.3.6.1.4.1.2011.6.139.13.3.3.1.1
This object indicates the MAC address of an AP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

hwWlanApSn 1.3.6.1.4.1.2011.6.139.13.3.3.1.2
This object indicates the sequence number (SN) of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApTypeInfo 1.3.6.1.4.1.2011.6.139.13.3.3.1.3
This object indicates the AP type.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApName 1.3.6.1.4.1.2011.6.139.13.3.3.1.4
This object indicates the AP name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanApGroup 1.3.6.1.4.1.2011.6.139.13.3.3.1.5
This object indicates the group to which an AP belongs.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanApRunState 1.3.6.1.4.1.2011.6.139.13.3.3.1.6
This object indicates the AP state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), autofind(2), typeNotMatch(3), fault(4), config(5), configFailed(6), download(7), normal(8), committing(9), commitFailed(10), standby(11), verMismatch(12), nameConflicted(13), invalid(14)  

hwWlanApSoftwareVersion 1.3.6.1.4.1.2011.6.139.13.3.3.1.7
This object indicates the AP software version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApHardwareVersion 1.3.6.1.4.1.2011.6.139.13.3.3.1.8
This object indicates the AP hardware version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApCpuType 1.3.6.1.4.1.2011.6.139.13.3.3.1.9
This object indicates the CPU type of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApCpufrequency 1.3.6.1.4.1.2011.6.139.13.3.3.1.10
This object indicates the CPU frequency of an AP.Unit: MHz.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApMemoryType 1.3.6.1.4.1.2011.6.139.13.3.3.1.11
This object indicates the memory type of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApDomain 1.3.6.1.4.1.2011.6.139.13.3.3.1.12
This object indicates the AP domain.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApIpAddress 1.3.6.1.4.1.2011.6.139.13.3.3.1.13
This object indicates the IP address of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanApIpNetMask 1.3.6.1.4.1.2011.6.139.13.3.3.1.14
This object indicates the IP address mask of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanApGatewayIp 1.3.6.1.4.1.2011.6.139.13.3.3.1.15
This object indicates the gateway IP address of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanApMemorySize 1.3.6.1.4.1.2011.6.139.13.3.3.1.16
This object indicates the memory size of an AP.Unit: MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApFlashSize 1.3.6.1.4.1.2011.6.139.13.3.3.1.17
This object indicates the flash memory size of an AP.Unit: MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApRunTime 1.3.6.1.4.1.2011.6.139.13.3.3.1.18
This object indicates the running time of an AP.Unit: tick.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApAdminOper 1.3.6.1.4.1.2011.6.139.13.3.3.1.19
This object indicates administrative status of an AP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reset(1), manufacturerConfig(3)  

hwWlanApDNS 1.3.6.1.4.1.2011.6.139.13.3.3.1.20
This object indicates the AP DNS.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanApOnlineTime 1.3.6.1.4.1.2011.6.139.13.3.3.1.21
This object indicates online duration of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApSysSoftwareDesc 1.3.6.1.4.1.2011.6.139.13.3.3.1.22
This object indicates system software description of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApSysHardtwareDesc 1.3.6.1.4.1.2011.6.139.13.3.3.1.23
This object indicates system hardware description of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApSysManufacture 1.3.6.1.4.1.2011.6.139.13.3.3.1.24
This object indicates the manufacturer of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApSysSoftwareName 1.3.6.1.4.1.2011.6.139.13.3.3.1.25
This object indicates software name of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApSysSoftwareVendor 1.3.6.1.4.1.2011.6.139.13.3.3.1.26
This object indicates the manufacturer of the AP software.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApBomCode 1.3.6.1.4.1.2011.6.139.13.3.3.1.27
This object indicates the BOM code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApIpv6Address 1.3.6.1.4.1.2011.6.139.13.3.3.1.28
This object indicates the IPv6 address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApIpv6NetMask 1.3.6.1.4.1.2011.6.139.13.3.3.1.29
This object indicates the IPv6 address mask.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApGatewayIpv6 1.3.6.1.4.1.2011.6.139.13.3.3.1.30
This object indicates the IPv6 gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApIpv6DNS 1.3.6.1.4.1.2011.6.139.13.3.3.1.31
This object indicates the IPv6 DNS.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApProtectAcIPv6Addr 1.3.6.1.4.1.2011.6.139.13.3.3.1.32
This object indicates the IPv6 address of the standby AC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApBootCountTotal 1.3.6.1.4.1.2011.6.139.13.3.3.1.33
This object indicates the total number of times an AP is restarted.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApBootCountPowerOff 1.3.6.1.4.1.2011.6.139.13.3.3.1.34
This object indicates the number of times an AP is restarted due to a power failure.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApBootCountClear 1.3.6.1.4.1.2011.6.139.13.3.3.1.35
This object clears the AP restart count.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwWlanApElectronicLabel 1.3.6.1.4.1.2011.6.139.13.3.3.1.36
This object indicates the electronic label of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1025)  

hwWlanApWiredPortNum 1.3.6.1.4.1.2011.6.139.13.3.3.1.37
This object indicates the total number of wired interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortMtu 1.3.6.1.4.1.2011.6.139.13.3.3.1.38
This object indicates the maximum transmit unit (MTU) of a wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortMac 1.3.6.1.4.1.2011.6.139.13.3.3.1.39
This object indicates the MAC address of a wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanApMemoryUseRate 1.3.6.1.4.1.2011.6.139.13.3.3.1.40
This object indicates the memory usage.Unit: %.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApCpuUseRate 1.3.6.1.4.1.2011.6.139.13.3.3.1.41
This object indicates the CPU usage.Unit: %.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApFlashFreeSize 1.3.6.1.4.1.2011.6.139.13.3.3.1.42
This object indicates available space in the flash memory.Unit: KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApTemperature 1.3.6.1.4.1.2011.6.139.13.3.3.1.43
This object indicates the operating temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApOnlineUserNum 1.3.6.1.4.1.2011.6.139.13.3.3.1.44
This object indicates the number of online users.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApDualBandAssoc5gStaNum 1.3.6.1.4.1.2011.6.139.13.3.3.1.45
This object indicates the number of dual-band terminals that access the 5 GHz radio.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApDualBandStaNum 1.3.6.1.4.1.2011.6.139.13.3.3.1.46
This object indicates the number of STAs that support dual frequency bands.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApStaOnlineFailRatio 1.3.6.1.4.1.2011.6.139.13.3.3.1.47
This object indicates STA online failure ratio on an AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApStaOfflineRatio 1.3.6.1.4.1.2011.6.139.13.3.3.1.48
This object indicates STA offline ratio of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApStickyClientRatio 1.3.6.1.4.1.2011.6.139.13.3.3.1.49
This object indicates the proportion of sticky STAs to all STAs.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApUpEthPortSpeed 1.3.6.1.4.1.2011.6.139.13.3.3.1.50
This object indicates the rate of an upstream Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER speed10(1), speed100(2), speed1000(3), speed10000(4)  

hwWlanApUpEthPortSpeedMode 1.3.6.1.4.1.2011.6.139.13.3.3.1.51
This object indicates the rate mode of an upstream Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), forced(2)  

hwWlanApUpEthPortDuplex 1.3.6.1.4.1.2011.6.139.13.3.3.1.52
This object indicates the duplex state of an upstream Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER half(1), full(2)  

hwWlanApUpEthPortDuplexMode 1.3.6.1.4.1.2011.6.139.13.3.3.1.53
This object indicates the duplex mode of an upstream Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), forced(2)  

hwWlanApUpPortSpeed 1.3.6.1.4.1.2011.6.139.13.3.3.1.54
This object indicates the real-time rate of an upstream interface.Unit: Kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanAPUpPortPER 1.3.6.1.4.1.2011.6.139.13.3.3.1.55
This object indicates the packet error rate of an upstream interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanEthportUpRate 1.3.6.1.4.1.2011.6.139.13.3.3.1.56
This object indicates the upstream rate of an Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanEthportDownRate 1.3.6.1.4.1.2011.6.139.13.3.3.1.57
This object indicates the downstream rate of an Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApAirportUpTraffic 1.3.6.1.4.1.2011.6.139.13.3.3.1.58
This object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApAirportDwTraffic 1.3.6.1.4.1.2011.6.139.13.3.3.1.59
This object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApEthportDwTraffic 1.3.6.1.4.1.2011.6.139.13.3.3.1.60
This object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApEthportUpTraffic 1.3.6.1.4.1.2011.6.139.13.3.3.1.61
This object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApUpPortRecvPackets 1.3.6.1.4.1.2011.6.139.13.3.3.1.62
This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApUpPortSendPackets 1.3.6.1.4.1.2011.6.139.13.3.3.1.63
This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApRowstatus 1.3.6.1.4.1.2011.6.139.13.3.3.1.64
This object indicates the row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwWlanApUpPortRecvBytes 1.3.6.1.4.1.2011.6.139.13.3.3.1.65
This object indicates the total number of bytes received on an upstream interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApUpPortSendBytes 1.3.6.1.4.1.2011.6.139.13.3.3.1.66
This object indicates the total number of bytes sent on an upstream interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApId 1.3.6.1.4.1.2011.6.139.13.3.3.1.67
Ap ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanCentralApId 1.3.6.1.4.1.2011.6.139.13.3.3.1.68
This object indicates the central AP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanCentralApMac 1.3.6.1.4.1.2011.6.139.13.3.3.1.69
This object indicates the MAC address of an central AP.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanCentralApName 1.3.6.1.4.1.2011.6.139.13.3.3.1.70
This object indicates the central AP name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApSDCardSize 1.3.6.1.4.1.2011.6.139.13.3.3.1.71
This object indicates the SD card size of an AP.Unit: MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanAPLongitude 1.3.6.1.4.1.2011.6.139.13.3.3.1.72
This object indicates the longitude of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanAPLatitude 1.3.6.1.4.1.2011.6.139.13.3.3.1.73
This object indicates the latitude of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortTable 1.3.6.1.4.1.2011.6.139.13.3.4
This table describes AP wired interfaces and is used to query attributes of the wired interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApWiredPortEntry

hwWlanApWiredPortEntry 1.3.6.1.4.1.2011.6.139.13.3.4.1
The index of this table is hwWlanApMac and hwWlanApWiredPortIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApWiredPortEntry  

hwWlanApWiredPortIndex 1.3.6.1.4.1.2011.6.139.13.3.4.1.1
This object indicates the index of an AP's wired interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortType 1.3.6.1.4.1.2011.6.139.13.3.4.1.2
This object indicates the type of an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fe(1), ge(2), gpon(3), epon(4), adsl2plus(5), trunk(6), multige(7)  

hwWlanApWiredPortDesc 1.3.6.1.4.1.2011.6.139.13.3.4.1.3
This object indicates description of an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortState 1.3.6.1.4.1.2011.6.139.13.3.4.1.4
This object indicates status of an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2), unknown(-1)  

hwWlanApWiredPortSpeed 1.3.6.1.4.1.2011.6.139.13.3.4.1.5
This object indicates the rate of an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApMultiWiredPortDuplex 1.3.6.1.4.1.2011.6.139.13.3.4.1.6
This object indicates the duplex state of an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER half(1), full(2), unknown(-1)  

hwWlanApMultiWiredPortNegotiation 1.3.6.1.4.1.2011.6.139.13.3.4.1.7
This object indicates the auto-negotiation mode of an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), forced(2), unknown(-1)  

hwWlanApMultiWiredPortMode 1.3.6.1.4.1.2011.6.139.13.3.4.1.8
This object indicates the working mode of an AP's wired interface.Default value: null.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER root(1), endpoint(2), middle(3), null(256)  

hwWlanApWiredPortApId 1.3.6.1.4.1.2011.6.139.13.3.4.1.9
This object indicates the AP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApWiredPortApName 1.3.6.1.4.1.2011.6.139.13.3.4.1.10
This object indicates the AP name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortStatTable 1.3.6.1.4.1.2011.6.139.13.3.5
This table is used to query or clear statistics on AP wired interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApWiredPortStatEntry

hwWlanApWiredPortStatEntry 1.3.6.1.4.1.2011.6.139.13.3.5.1
The indexes of this table are hwWlanApMac and hwWlanApWiredPortIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApWiredPortStatEntry  

hwWlanApWiredPortStatClear 1.3.6.1.4.1.2011.6.139.13.3.5.1.1
This object clears interface statistics.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortUpDwnTimes 1.3.6.1.4.1.2011.6.139.13.3.5.1.2
This object indicates the number of times an AP's wired interface alternates between Up and Down.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApWiredPortInPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.3
This object indicates the total number of frames received on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortInUnicastPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.4
This object indicates the number of unicast frames received on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortInNonUnicastPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.5
This object indicates the number of non-unicast frames received on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortInBytes 1.3.6.1.4.1.2011.6.139.13.3.5.1.6
This object indicates the number of bytes received on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortInErrorPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.7
This object indicates the number of error frames received on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortInDiscardPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.8
This object indicates the number of dropped frames received on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortOutPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.9
This object indicates the total number of frames sent on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortOutUnicastPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.10
This object indicates the number of unicast frames sent on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortOutNonUnicastPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.11
This object indicates the number of non-unicast frames sent on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortOutBytes 1.3.6.1.4.1.2011.6.139.13.3.5.1.12
This object indicates the number of bytes sent on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortOutErrorsPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.13
This object indicates the number of error packets sent on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortOutDiscardPkts 1.3.6.1.4.1.2011.6.139.13.3.5.1.14
This object indicates the number of dropped packets sent on an AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanApWiredPortLldpTable 1.3.6.1.4.1.2011.6.139.13.3.6
This table is used to query LLDP neighbor information of a specified AP. No entry can be created, modified, or deleted in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApWiredPortLldpEntry

hwWlanApWiredPortLldpEntry 1.3.6.1.4.1.2011.6.139.13.3.6.1
The indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, and hwWlanApWiredPortLldpRemIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApWiredPortLldpEntry  

hwWlanApWiredPortLldpRemLocalPortNum 1.3.6.1.4.1.2011.6.139.13.3.6.1.1
This object indicates the local port number of the remote neighbor of the AP's wired interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemIndex 1.3.6.1.4.1.2011.6.139.13.3.6.1.2
This object indicates the index of the remote neighbor interface of the AP's wired interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemChassisIdSubtype 1.3.6.1.4.1.2011.6.139.13.3.6.1.3
This object indicates the subtype of the remote neighbor of the AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemChassisId 1.3.6.1.4.1.2011.6.139.13.3.6.1.4
This object indicates the subtype ID of the remote neighbor of the AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortLldpRemPortIdSubtype 1.3.6.1.4.1.2011.6.139.13.3.6.1.5
This object indicates the subtype of the remote neighbor interface of the AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemPortId 1.3.6.1.4.1.2011.6.139.13.3.6.1.6
This object indicates the ID of the remote neighbor interface of the AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortLldpRemPortDesc 1.3.6.1.4.1.2011.6.139.13.3.6.1.7
This object indicates descriptions about the remote neighbor interface of the AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortLldpRemSysName 1.3.6.1.4.1.2011.6.139.13.3.6.1.8
This object indicates the system name of the remote neighbor of the AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortLldpRemSysDesc 1.3.6.1.4.1.2011.6.139.13.3.6.1.9
This object indicates system descriptions about the remote neighbor of the AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortLldpRemSysCapSupported 1.3.6.1.4.1.2011.6.139.13.3.6.1.10
This object indicates whether the remote neighbor of the AP's wired interface supports the system capability.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemSysCapEnabled 1.3.6.1.4.1.2011.6.139.13.3.6.1.11
This object enables the system capability of the remote neighbor of the AP's wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemLocalApId 1.3.6.1.4.1.2011.6.139.13.3.6.1.12
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanApWiredPortLldpRemManAddrTable 1.3.6.1.4.1.2011.6.139.13.3.7
This table is used to query management addresses of LLDP neighbors of a specified AP. No entry can be created, modified, or deleted in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApWiredPortLldpRemManAddrEntry

hwWlanApWiredPortLldpRemManAddrEntry 1.3.6.1.4.1.2011.6.139.13.3.7.1
The indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, hwWlanApWiredPortLldpRemIndex, hwWlanApWiredPortLldpRemManAddrSubtype, and hwWlanApWiredPortLldpRemManAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApWiredPortLldpRemManAddrEntry  

hwWlanApWiredPortLldpRemManAddrSubtype 1.3.6.1.4.1.2011.6.139.13.3.7.1.1
This object indicates the This object indicates the remote management address subtype of the wired interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemManAddr 1.3.6.1.4.1.2011.6.139.13.3.7.1.2
This object indicates the remote management address of the wired interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

hwWlanApWiredPortLldpRemManAddrIfSubtype 1.3.6.1.4.1.2011.6.139.13.3.7.1.3
This object indicates the interface subtype of the remote management address of the wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemManAddrIfId 1.3.6.1.4.1.2011.6.139.13.3.7.1.4
This object indicates the interface ID of the remote management address of the wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanApWiredPortLldpRemManAddrOID 1.3.6.1.4.1.2011.6.139.13.3.7.1.5
This object indicates the remote management address OID of the wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApOnlineFailTable 1.3.6.1.4.1.2011.6.139.13.3.8
This table is used to query or clear AP online failure records, including failure time and reason.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApOnlineFailEntry

hwWlanApOnlineFailEntry 1.3.6.1.4.1.2011.6.139.13.3.8.1
The index of this table is hwWlanApOnlineFailMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApOnlineFailEntry  

hwWlanApOnlineFailMac 1.3.6.1.4.1.2011.6.139.13.3.8.1.1
This object indicates the MAC address of the STA who fails to go online.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanApOnlineFailTime 1.3.6.1.4.1.2011.6.139.13.3.8.1.2
This object indicates the latest time when the STA fails to go online.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApOnlineFailReason 1.3.6.1.4.1.2011.6.139.13.3.8.1.3
This object indicates the reason for the latest STA online failure.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApOnlineFailRowStatus 1.3.6.1.4.1.2011.6.139.13.3.8.1.4
This object indicates that online failure records of STAs are deleted based on MAC addresses.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanApOfflineTable 1.3.6.1.4.1.2011.6.139.13.3.9
This table is used to query or clear AP offline records, including offline time and reason.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApOfflineEntry

hwWlanApOfflineEntry 1.3.6.1.4.1.2011.6.139.13.3.9.1
The index of this table is hwWlanApOfflineMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApOfflineEntry  

hwWlanApOfflineMac 1.3.6.1.4.1.2011.6.139.13.3.9.1.1
This object indicates the MAC address of an AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanApOfflineTime 1.3.6.1.4.1.2011.6.139.13.3.9.1.2
This object indicates the AP offline time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApOfflineReason 1.3.6.1.4.1.2011.6.139.13.3.9.1.3
This object indicates the AP offline reason.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanApOfflineRowStatus 1.3.6.1.4.1.2011.6.139.13.3.9.1.4
This object clears AP offline records.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwWlanIDIndexedApTable 1.3.6.1.4.1.2011.6.139.13.3.10
This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanIDIndexedApEntry

hwWlanIDIndexedApEntry 1.3.6.1.4.1.2011.6.139.13.3.10.1
The index of this table is hwWlanIDIndexedApId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanIDIndexedApEntry  

hwWlanIDIndexedApId 1.3.6.1.4.1.2011.6.139.13.3.10.1.1
Ap ID.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedApMac 1.3.6.1.4.1.2011.6.139.13.3.10.1.2
This object indicates the MAC address of an AP.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwWlanIDIndexedApSn 1.3.6.1.4.1.2011.6.139.13.3.10.1.3
This object indicates the sequence number (SN) of an AP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApTypeInfo 1.3.6.1.4.1.2011.6.139.13.3.10.1.4
This object indicates the AP type.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApName 1.3.6.1.4.1.2011.6.139.13.3.10.1.5
This object indicates the AP name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApGroup 1.3.6.1.4.1.2011.6.139.13.3.10.1.6
This object indicates the group to which an AP belongs.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApRunState 1.3.6.1.4.1.2011.6.139.13.3.10.1.7
This object indicates the AP state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), autofind(2), typeNotMatch(3), fault(4), config(5), configFailed(6), download(7), normal(8), committing(9), commitFailed(10), standby(11), verMismatch(12), nameConflicted(13), invalid(14)  

hwWlanIDIndexedApSoftwareVersion 1.3.6.1.4.1.2011.6.139.13.3.10.1.8
This object indicates the AP software version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApHardwareVersion 1.3.6.1.4.1.2011.6.139.13.3.10.1.9
This object indicates the AP hardware version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApCpuType 1.3.6.1.4.1.2011.6.139.13.3.10.1.10
This object indicates the CPU type of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApCpufrequency 1.3.6.1.4.1.2011.6.139.13.3.10.1.11
This object indicates the CPU frequency of an AP.Unit: MHz.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApMemoryType 1.3.6.1.4.1.2011.6.139.13.3.10.1.12
This object indicates the memory type of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApDomain 1.3.6.1.4.1.2011.6.139.13.3.10.1.13
This object indicates the AP domain.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApIpAddress 1.3.6.1.4.1.2011.6.139.13.3.10.1.14
This object indicates the IP address of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanIDIndexedApIpNetMask 1.3.6.1.4.1.2011.6.139.13.3.10.1.15
This object indicates the IP address mask of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanIDIndexedApGatewayIp 1.3.6.1.4.1.2011.6.139.13.3.10.1.16
This object indicates the gateway IP address of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanIDIndexedApMemorySize 1.3.6.1.4.1.2011.6.139.13.3.10.1.17
This object indicates the memory size of an AP.Unit: MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApFlashSize 1.3.6.1.4.1.2011.6.139.13.3.10.1.18
This object indicates the flash memory size of an AP.Unit: MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApRunTime 1.3.6.1.4.1.2011.6.139.13.3.10.1.19
This object indicates the running time of an AP.Unit: tick.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedApAdminOper 1.3.6.1.4.1.2011.6.139.13.3.10.1.20
This object indicates administrative status of an AP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reset(1), manufacturerConfig(3)  

hwWlanIDIndexedApDNS 1.3.6.1.4.1.2011.6.139.13.3.10.1.21
This object indicates the AP DNS.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanIDIndexedApOnlineTime 1.3.6.1.4.1.2011.6.139.13.3.10.1.22
This object indicates online duration of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedApSysSoftwareDesc 1.3.6.1.4.1.2011.6.139.13.3.10.1.23
This object indicates system software description of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApSysHardtwareDesc 1.3.6.1.4.1.2011.6.139.13.3.10.1.24
This object indicates system hardware description of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApSysManufacture 1.3.6.1.4.1.2011.6.139.13.3.10.1.25
This object indicates the manufacturer of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApSysSoftwareName 1.3.6.1.4.1.2011.6.139.13.3.10.1.26
This object indicates software name of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApSysSoftwareVendor 1.3.6.1.4.1.2011.6.139.13.3.10.1.27
This object indicates the manufacturer of the AP software.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApBomCode 1.3.6.1.4.1.2011.6.139.13.3.10.1.28
This object indicates the BOM code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApIpv6Address 1.3.6.1.4.1.2011.6.139.13.3.10.1.29
This object indicates the IPv6 address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApIpv6NetMask 1.3.6.1.4.1.2011.6.139.13.3.10.1.30
This object indicates the IPv6 address mask.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApGatewayIpv6 1.3.6.1.4.1.2011.6.139.13.3.10.1.31
This object indicates the IPv6 gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApIpv6DNS 1.3.6.1.4.1.2011.6.139.13.3.10.1.32
This object indicates the IPv6 DNS.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApProtectAcIPv6Addr 1.3.6.1.4.1.2011.6.139.13.3.10.1.33
This object indicates the IPv6 address of the standby AC.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApBootCountTotal 1.3.6.1.4.1.2011.6.139.13.3.10.1.34
This object indicates the total number of times an AP is restarted.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApBootCountPowerOff 1.3.6.1.4.1.2011.6.139.13.3.10.1.35
This object indicates the number of times an AP is restarted due to a power failure.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApBootCountClear 1.3.6.1.4.1.2011.6.139.13.3.10.1.36
This object clears the AP restart count.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwWlanIDIndexedApElectronicLabel 1.3.6.1.4.1.2011.6.139.13.3.10.1.37
This object indicates the electronic label of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1025)  

hwWlanIDIndexedApWiredPortNum 1.3.6.1.4.1.2011.6.139.13.3.10.1.38
This object indicates the total number of wired interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApWiredPortMtu 1.3.6.1.4.1.2011.6.139.13.3.10.1.39
This object indicates the maximum transmit unit (MTU) of a wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApWiredPortMac 1.3.6.1.4.1.2011.6.139.13.3.10.1.40
This object indicates the MAC address of a wired interface.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanIDIndexedApMemoryUseRate 1.3.6.1.4.1.2011.6.139.13.3.10.1.41
This object indicates the memory usage.Unit: %.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApCpuUseRate 1.3.6.1.4.1.2011.6.139.13.3.10.1.42
This object indicates the CPU usage.Unit: %.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApFlashFreeSize 1.3.6.1.4.1.2011.6.139.13.3.10.1.43
This object indicates available space in the flash memory.Unit: KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApTemperature 1.3.6.1.4.1.2011.6.139.13.3.10.1.44
This object indicates the operating temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApOnlineUserNum 1.3.6.1.4.1.2011.6.139.13.3.10.1.45
This object indicates the number of online users.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApDualBandAssoc5gStaNum 1.3.6.1.4.1.2011.6.139.13.3.10.1.46
This object indicates the number of dual-band terminals that access the 5 GHz radio.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedApDualBandStaNum 1.3.6.1.4.1.2011.6.139.13.3.10.1.47
This object indicates the number of STAs that support dual frequency bands.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedApStaOnlineFailRatio 1.3.6.1.4.1.2011.6.139.13.3.10.1.48
This object indicates STA online failure ratio on an AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedApStaOfflineRatio 1.3.6.1.4.1.2011.6.139.13.3.10.1.49
This object indicates STA offline ratio of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedApStickyClientRatio 1.3.6.1.4.1.2011.6.139.13.3.10.1.50
This object indicates the proportion of sticky STAs to all STAs.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedApUpEthPortSpeed 1.3.6.1.4.1.2011.6.139.13.3.10.1.51
This object indicates the rate of an upstream Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER speed10(1), speed100(2), speed1000(3), speed10000(4)  

hwWlanIDIndexedApUpEthPortSpeedMode 1.3.6.1.4.1.2011.6.139.13.3.10.1.52
This object indicates the rate mode of an upstream Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), forced(2)  

hwWlanIDIndexedApUpEthPortDuplex 1.3.6.1.4.1.2011.6.139.13.3.10.1.53
This object indicates the duplex state of an upstream Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER half(1), full(2)  

hwWlanIDIndexedApUpEthPortDuplexMode 1.3.6.1.4.1.2011.6.139.13.3.10.1.54
This object indicates the duplex mode of an upstream Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), forced(2)  

hwWlanIDIndexedApUpPortSpeed 1.3.6.1.4.1.2011.6.139.13.3.10.1.55
This object indicates the real-time rate of an upstream interface.Unit: Kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedAPUpPortPER 1.3.6.1.4.1.2011.6.139.13.3.10.1.56
This object indicates the packet error rate of an upstream interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedEthportUpRate 1.3.6.1.4.1.2011.6.139.13.3.10.1.57
This object indicates the upstream rate of an Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedEthportDownRate 1.3.6.1.4.1.2011.6.139.13.3.10.1.58
This object indicates the downstream rate of an Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedApAirportUpTraffic 1.3.6.1.4.1.2011.6.139.13.3.10.1.59
This object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApAirportDwTraffic 1.3.6.1.4.1.2011.6.139.13.3.10.1.60
This object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApEthportDwTraffic 1.3.6.1.4.1.2011.6.139.13.3.10.1.61
This object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApEthportUpTraffic 1.3.6.1.4.1.2011.6.139.13.3.10.1.62
This object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApUpPortRecvPackets 1.3.6.1.4.1.2011.6.139.13.3.10.1.63
This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanIDIndexedApUpPortSendPackets 1.3.6.1.4.1.2011.6.139.13.3.10.1.64
This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanIDIndexedApUpPortRecvBytes 1.3.6.1.4.1.2011.6.139.13.3.10.1.65
This object indicates the total number of bytes received on an upstream interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanIDIndexedApUpPortSendBytes 1.3.6.1.4.1.2011.6.139.13.3.10.1.66
This object indicates the total number of bytes sent on an upstream interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwWlanIDIndexedCentralApId 1.3.6.1.4.1.2011.6.139.13.3.10.1.67
This object indicates the central AP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedCentralApMac 1.3.6.1.4.1.2011.6.139.13.3.10.1.68
This object indicates the MAC address of an central AP.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWlanIDIndexedCentralApName 1.3.6.1.4.1.2011.6.139.13.3.10.1.69
This object indicates the central AP name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedApRowstatus 1.3.6.1.4.1.2011.6.139.13.3.10.1.70
This object indicates the row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwWlanIDIndexedApSDCardSize 1.3.6.1.4.1.2011.6.139.13.3.10.1.71
This object indicates the SD card size of an AP.Unit: MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanIDIndexedAPLongitude 1.3.6.1.4.1.2011.6.139.13.3.10.1.72
This object indicates the longitude of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedAPLatitude 1.3.6.1.4.1.2011.6.139.13.3.10.1.73
This object indicates the latitude of an AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanAPConformance 1.3.6.1.4.1.2011.6.139.13.4
OBJECT IDENTIFIER    

hwWlanAPCompliances 1.3.6.1.4.1.2011.6.139.13.4.1
OBJECT IDENTIFIER    

hwWlanAPCompliance 1.3.6.1.4.1.2011.6.139.13.4.1.1
Description.
Status: current Access: read-only
MODULE-COMPLIANCE    

hwWlanAPObjectGroups 1.3.6.1.4.1.2011.6.139.13.4.2
OBJECT IDENTIFIER    

hwWlanApTrapGroup 1.3.6.1.4.1.2011.6.139.13.4.2.1
Description.
Status: current Access: read-only
NOTIFICATION-GROUP    

hwWlanApTrapObjectsGroup 1.3.6.1.4.1.2011.6.139.13.4.2.2
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanApTypeGroup 1.3.6.1.4.1.2011.6.139.13.4.2.3
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanApInfoGroup 1.3.6.1.4.1.2011.6.139.13.4.2.4
Description.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor