HUAWEI-VO-DIGITAL-IF-MIB

File: HUAWEI-VO-DIGITAL-IF-MIB.mib (53047 bytes)

Imported modules

SNMPv2-SMI HUAWEI-3COM-OID-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
voice

Defined Types

HWVoDigitalIfCommonCfgEntry  
SEQUENCE    
  hwVoDigitalIfCfgPortNumber INTEGER
  hwVoDigitalIfCfgGroupNumber INTEGER
  hwVoDigitalIfCfgBoardType INTEGER
  hwVoDigitalIfCfgSignalType INTEGER
  hwVoDigitalIfCfgTimeSlotsConfigurable OCTET STRING

HWVoDigitalIfEMCfgEntry  
SEQUENCE    
  hwVoDigitalIfEMCfgPortNumber INTEGER
  hwVoDigitalIfEMCfgGroupNumber INTEGER
  hwVoDigitalIfEMCfgTimeoutInterDigits INTEGER
  hwVoDigitalIfEMCfgTimeoutRinging INTEGER
  hwVoDigitalIfEMCfgTimeoutWaitDigit INTEGER

HWVoDigitalIfEMABCDCfgEntry  
SEQUENCE    
  hwVoDigitalIfEMABCDCfgPortNumber INTEGER
  hwVoDigitalIfEMABCDCfgGroupNumber INTEGER
  hwVoDigitalIfEMABCDRxIdle OCTET STRING
  hwVoDigitalIfEMABCDRxSeize OCTET STRING
  hwVoDigitalIfEMABCDTxIdle OCTET STRING
  hwVoDigitalIfEMABCDTxSeize OCTET STRING

HWVoDigitalIfEMTimerEntry  
SEQUENCE    
  hwVoDigitalIfEMTimerPortNumber INTEGER
  hwVoDigitalIfEMTimerGroupNumber INTEGER
  hwVoDigitalIfEMTimerCallInterval INTEGER
  hwVoDigitalIfEMTimerSendWink INTEGER
  hwVoDigitalIfEMTimerWinkRising INTEGER
  hwVoDigitalIfEMTimerWinkHold INTEGER
  hwVoDigitalIfEMTimerDialoutDelay INTEGER
  hwVoDigitalIfEMTimerRising INTEGER
  hwVoDigitalIfEMTimerHold INTEGER
  hwVoDigitalIfEMTimerDtmf INTEGER
  hwVoDigitalIfEMTimerDtmfInterval INTEGER

HWVoDigitalIfR2CfgEntry  
SEQUENCE    
  hwVoDigitalIfR2CfgPortNumber INTEGER
  hwVoDigitalIfR2CfgGroupNumber INTEGER
  hwVoDigitalIfR2CfgAniSwitch INTEGER
  hwVoDigitalIfR2CallerDigits INTEGER
  hwVoDigitalIfR2DebounceTime INTEGER
  hwVoDigitalIfR2Ka INTEGER
  hwVoDigitalIfR2Kd INTEGER
  hwVoDigitalIfR2SeizureAckTime INTEGER
  hwVoDigitalIfR2SelectMode INTEGER
  hwVoDigitalIfR2TimeoutKb INTEGER
  hwVoDigitalIfR2TimeoutKd INTEGER
  hwVoDigitalIfR2TimeoutNextNumber INTEGER
  hwVoDigitalIfR2TimeoutReleaseApprove INTEGER
  hwVoDigitalIfR2TimeoutRing Integer32
  hwVoDigitalIfR2TimeoutSendAnswer INTEGER
  hwVoDigitalIfR2CfgBillingCategory INTEGER
  hwVoDigitalIfR2CfgCallingCategory INTEGER
  hwVoDigitalIfR2CfgCongestion INTEGER
  hwVoDigitalIfR2CfgDemandRefused INTEGER
  hwVoDigitalIfR2CfgDigitEnd INTEGER
  hwVoDigitalIfR2CfgNullnum INTEGER
  hwVoDigitalIfR2CfgReqBillingCategory INTEGER
  hwVoDigitalIfR2CfgReqCallingCategory INTEGER
  hwVoDigitalIfR2CfgReqCurrentdigit INTEGER
  hwVoDigitalIfR2CfgReqFirstCallingnum INTEGER
  hwVoDigitalIfR2CfgReqFirstDigit INTEGER
  hwVoDigitalIfR2CfgReqNextCallednum INTEGER
  hwVoDigitalIfR2CfgReqNextCallingnum INTEGER
  hwVoDigitalIfR2CfgReqLastFirstDigit INTEGER
  hwVoDigitalIfR2CfgReqLastSecondDigit INTEGER
  hwVoDigitalIfR2CfgReqLastThirdDigit INTEGER
  hwVoDigitalIfR2CfgReqSwitchGroupB INTEGER
  hwVoDigitalIfR2CfgSubscriberIdle INTEGER
  hwVoDigitalIfR2CfgSubscriberBusy INTEGER
  hwVoDigitalIfR2CfgDebounceTime INTEGER
  hwVoDigitalIfR2CfgSendringBackTime INTEGER
  hwVoDigitalIfR2CfgSendringBusyTime INTEGER
  hwVoDigitalIfR2CfgPulseSignalPersistenceTime INTEGER
  hwVoDigitalIfR2CfgDlAnswerTime INTEGER
  hwVoDigitalIfR2CfgDlClearBackTime INTEGER
  hwVoDigitalIfR2CfgDlClearForwardTime INTEGER
  hwVoDigitalIfR2CfgDlSeizureTime INTEGER
  hwVoDigitalIfR2CfgDlReanswerTime INTEGER
  hwVoDigitalIfR2CfgDlReleaseGuardTime INTEGER
  hwVoDigitalIfR2CfgMfcGroupBTime INTEGER
  hwVoDigitalIfR2CfgAniEnable INTEGER
  hwVoDigitalIfR2CfgGroupBEnable INTEGER
  hwVoDigitalIfR2CfgClearForwardAckEnable INTEGER
  hwVoDigitalIfR2CfgDlSeizureAckEnable INTEGER
  hwVoDigitalIfR2CfgDTMFEnable INTEGER
  hwVoDigitalIfR2CfgAnswerEnable INTEGER
  hwVoDigitalIfR2CfgReanswerEnable INTEGER
  hwVoDigitalIfR2CfgFinalCallnumEnable INTEGER
  hwVoDigitalIfR2CfgForceMeteringEnable INTEGER
  hwVoDigitalIfR2CfgSendRingBackEnable INTEGER
  hwVoDigitalIfR2CfgSendRingBusyEnable INTEGER
  hwVoDigitalIfR2CfgReqCategoryOffset INTEGER
  hwVoDigitalIfR2CfgReqCallingnumOffset INTEGER
  hwVoDigitalIfR2CfgCountryMode INTEGER
  hwVoDigitalIfR2CfgSpecialCharacter INTEGER
  hwVoDigitalIfR2CfgSpecialSignal INTEGER
  hwVoDigitalIfR2CfgSelectMode INTEGER
  hwVoDigitalIfR2CfgDTMFTime INTEGER
  hwVoDigitalIfR2CfgReqCallCreate INTEGER

HWVoDigitalIfR2ABCDCfgEntry  
SEQUENCE    
  hwVoDigitalIfR2ABCDCfgPortNumber INTEGER
  hwVoDigitalIfR2ABCDCfgGroupNumber INTEGER
  hwVoDigitalIfR2ABCDReverseABCD OCTET STRING
  hwVoDigitalIfR2ABCDRenewABCD OCTET STRING
  hwVoDigitalIfR2ABCDRxIdle OCTET STRING
  hwVoDigitalIfR2ABCDTxIdle OCTET STRING
  hwVoDigitalIfR2ABCDRxSeizure OCTET STRING
  hwVoDigitalIfR2ABCDTxSeizure OCTET STRING
  hwVoDigitalIfR2ABCDRxSeizureAck OCTET STRING
  hwVoDigitalIfR2ABCDTxSeizureAck OCTET STRING
  hwVoDigitalIfR2ABCDRxAnswer OCTET STRING
  hwVoDigitalIfR2ABCDTxAnswer OCTET STRING
  hwVoDigitalIfR2ABCDRxClearForward OCTET STRING
  hwVoDigitalIfR2ABCDTxClearForward OCTET STRING
  hwVoDigitalIfR2ABCDRxClearBack OCTET STRING
  hwVoDigitalIfR2ABCDTxClearBack OCTET STRING
  hwVoDigitalIfR2ABCDRxReleaseGuard OCTET STRING
  hwVoDigitalIfR2ABCDTxReleaseGuard OCTET STRING
  hwVoDigitalIfR2ABCDRxBlocking OCTET STRING
  hwVoDigitalIfR2ABCDTxBlocking OCTET STRING

Defined Values

hwVoiceDigitalInterfaceMIB 1.3.6.1.4.1.2011.5.25.1.4
MODULE-IDENTITY    

hwVoDigitalIfCommonObjects 1.3.6.1.4.1.2011.5.25.1.4.1
OBJECT IDENTIFIER    

hwVoDigitalIfCommonCfgTable 1.3.6.1.4.1.2011.5.25.1.4.1.1
The voice digital interface common configuration table contains information about configuration parameters for digital voice interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoDigitalIfCommonCfgEntry

hwVoDigitalIfCommonCfgEntry 1.3.6.1.4.1.2011.5.25.1.4.1.1.1
An entry in the voice digital interface common configuration table. The entry is automatically created when a digital voice interface hardware is found.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoDigitalIfCommonCfgEntry  

hwVoDigitalIfCfgPortNumber 1.3.6.1.4.1.2011.5.25.1.4.1.1.1.1
Index of voice digital interface common config table. It identify the number of the voice port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoDigitalIfCfgGroupNumber 1.3.6.1.4.1.2011.5.25.1.4.1.1.1.2
Index of voice digital interface common config table. It identify the number of the ds0 or pri group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..30  

hwVoDigitalIfCfgBoardType 1.3.6.1.4.1.2011.5.25.1.4.1.1.1.3
This object expresses the type of digital voice interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER e1vi(1), t1vi(2)  

hwVoDigitalIfCfgSignalType 1.3.6.1.4.1.2011.5.25.1.4.1.1.1.4
This object expresses the signal type of ds0 or pri group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER r2(1), dss1(2), em(3)  

hwVoDigitalIfCfgTimeSlotsConfigurable 1.3.6.1.4.1.2011.5.25.1.4.1.1.1.5
This object expresses whether the timeslot is available. '1' states the timeslot is available for the E1VI or T1VI, '0' states the timeslot is not available. For T1VI, the length is 24. For E1VI, the length is 32.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(24|32)  

hwVoDigitalIfEMObjects 1.3.6.1.4.1.2011.5.25.1.4.2
OBJECT IDENTIFIER    

hwVoDigitalIfEMCfgTable 1.3.6.1.4.1.2011.5.25.1.4.2.1
The voice digital interface e&m configuration table contains information about configuration parameters for digital e&m voice interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoDigitalIfEMCfgEntry

hwVoDigitalIfEMCfgEntry 1.3.6.1.4.1.2011.5.25.1.4.2.1.1
An entry in the voice digital interface e&m configuration table. The entry is automatically created when a digital voice interface is configed for digital e&m signal.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoDigitalIfEMCfgEntry  

hwVoDigitalIfEMCfgPortNumber 1.3.6.1.4.1.2011.5.25.1.4.2.1.1.1
Index of voice digital interface e&m config table. It identify the number of the voice port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoDigitalIfEMCfgGroupNumber 1.3.6.1.4.1.2011.5.25.1.4.2.1.1.2
Index of voice digital interface e&m config table. It identify the number of the ds0 group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..30  

hwVoDigitalIfEMCfgTimeoutInterDigits 1.3.6.1.4.1.2011.5.25.1.4.2.1.1.3
This object states the longest time to wait between two input digit from caller side. The default value is 10 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..120  

hwVoDigitalIfEMCfgTimeoutRinging 1.3.6.1.4.1.2011.5.25.1.4.2.1.1.4
This object expresses the ring timeout of the digital e&m interface. The value of 65535 indicates the timer is approach infinity. The default value of this object is 60 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..600 | 65535  

hwVoDigitalIfEMCfgTimeoutWaitDigit 1.3.6.1.4.1.2011.5.25.1.4.2.1.1.5
This object expresses the wait digit timeout of the digital e&m interface. The value of 65535 indicates the timer is approach infinity. The default value of this object is 5 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 3..600 | 65535  

hwVoDigitalIfEMABCDCfgTable 1.3.6.1.4.1.2011.5.25.1.4.2.2
The voice digital interface e&m abcd configuration table contains information about abcd bits configuration parameters for digital e&m voice interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoDigitalIfEMABCDCfgEntry

hwVoDigitalIfEMABCDCfgEntry 1.3.6.1.4.1.2011.5.25.1.4.2.2.1
An entry in the voice digital interface e&m abcd configuration table. The entry is automatically created when a digital voice interface is configed for digital e&m signal.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoDigitalIfEMABCDCfgEntry  

hwVoDigitalIfEMABCDCfgPortNumber 1.3.6.1.4.1.2011.5.25.1.4.2.2.1.1
Index of voice digital interface e&m abcd config table. It identify the number of the voice port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoDigitalIfEMABCDCfgGroupNumber 1.3.6.1.4.1.2011.5.25.1.4.2.2.1.2
Index of voice digital interface e&m abcd config table. It identify the number of the ds0 group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..30  

hwVoDigitalIfEMABCDRxIdle 1.3.6.1.4.1.2011.5.25.1.4.2.2.1.3
This object expresses the a b c d bits for receiving idle signal. The default value is '1101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfEMABCDRxSeize 1.3.6.1.4.1.2011.5.25.1.4.2.2.1.4
This object expresses the a b c d bits for receiving seize signal. The default value is '0101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfEMABCDTxIdle 1.3.6.1.4.1.2011.5.25.1.4.2.2.1.5
This object expresses the a b c d bits for sending idle signal. The default value is '1101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfEMABCDTxSeize 1.3.6.1.4.1.2011.5.25.1.4.2.2.1.6
This object expresses the a b c d bits for sending seize signal. The default value is '0101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfEMTimerTable 1.3.6.1.4.1.2011.5.25.1.4.2.4
The voice digital interface e&m timer table contains information about timer parameters for digital e&m voice interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoDigitalIfEMTimerEntry

hwVoDigitalIfEMTimerEntry 1.3.6.1.4.1.2011.5.25.1.4.2.4.1
An entry in the voice digital interface e&m timer table. The entry is automatically created when a digital voice interface is configed for digital e&m signal.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoDigitalIfEMTimerEntry  

hwVoDigitalIfEMTimerPortNumber 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.1
Index of voice digital interface e&m timer config table. It identify the number of the voice port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoDigitalIfEMTimerGroupNumber 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.2
Index of voice digital interface e&m timer config table. It identify the number of the ds0 group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..30  

hwVoDigitalIfEMTimerCallInterval 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.3
This object expresses the dureation of call clearing. The default value is 200 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 200..2000  

hwVoDigitalIfEMTimerSendWink 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.4
This object expresses the max time between receiving seizure signal and sending wink signal. The default value is 500 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..5000  

hwVoDigitalIfEMTimerWinkRising 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.5
This object expresses the max time between sending seizure signal and receiving wink signal. The default value is 1000 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..5000  

hwVoDigitalIfEMTimerWinkHold 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.6
This object expresses the max duration for sending wink signal. The default value is 500 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..3000  

hwVoDigitalIfEMTimerDialoutDelay 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.7
This object expresses max time sending called digits. The default value is 300 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..5000  

hwVoDigitalIfEMTimerRising 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.8
This object expresses the wait duration between receiveing seizure signal and sending delay signal. The default value is 300 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..2000  

hwVoDigitalIfEMTimerHold 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.9
This object expresses the max time sending delay signal. The default value is 400 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..5000  

hwVoDigitalIfEMTimerDtmf 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.10
This object expresses outgoing dtmf digit duration of the digital e&m interface. The default value is 120 milliseconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..500  

hwVoDigitalIfEMTimerDtmfInterval 1.3.6.1.4.1.2011.5.25.1.4.2.4.1.11
This object expresses outgoing dtmf inter-digit duration of the digital e&m interface. The default value is 120 milliseconds
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..500  

hwVoDigitalIfR2Objects 1.3.6.1.4.1.2011.5.25.1.4.3
OBJECT IDENTIFIER    

hwVoDigitalIfR2CfgTable 1.3.6.1.4.1.2011.5.25.1.4.3.1
The voice digital interface r2 configuration table contains information about configuration parameters for digital r2 voice interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoDigitalIfR2CfgEntry

hwVoDigitalIfR2CfgEntry 1.3.6.1.4.1.2011.5.25.1.4.3.1.1
An entry in the voice digital interface r2 configuration table. The entry is automatically created when a digital voice interface is configed for digital r2 signal.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoDigitalIfR2CfgEntry  

hwVoDigitalIfR2CfgPortNumber 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.1
Index of voice digital interface r2 config table. It identify the number of the voice port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoDigitalIfR2CfgGroupNumber 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.2
Index of voice digital interface r2 config table. It identify the number of the ds0 group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..30  

hwVoDigitalIfR2CfgAniSwitch 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.3
This object expresses the ANI funtion is enable or disable. The default value is disable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CallerDigits 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.4
This object expresses how many digits will be collected befor sending A6. The default value of this object is 1.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

hwVoDigitalIfR2DebounceTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.5
This object expresses the minimus duration the line signal to persist. The default value of this object is 40.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 10..40  

hwVoDigitalIfR2Ka 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.6
This object expresses the code of KA signal. The default value is 1.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

hwVoDigitalIfR2Kd 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.7
This object expresses the code of KD signal. The default value is 3.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

hwVoDigitalIfR2SeizureAckTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.8
This object expresses the longgest time to wait the seizure acknowldge signal. The default value is 1000 milliseconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 200..3000  

hwVoDigitalIfR2SelectMode 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.9
This object expresses the trunk mode to be selected. max set select trunk mode to max-mode maxpoll set select trunk mode to max-poll-mode min set select trunk mode to min-mode minpoll set select trunk mode to min-poll-mode The default value is min.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER max(1), maxpoll(2), min(3), minpoll(4)  

hwVoDigitalIfR2TimeoutKb 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.10
This object expresses the maxinum time to wait kb signal. The default value of this object is 5000 milliseconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1000..50000  

hwVoDigitalIfR2TimeoutKd 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.11
This object expresses the maxinum time to wait kd signal. The default value of this object is 5000 milliseconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1000..50000  

hwVoDigitalIfR2TimeoutNextNumber 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.12
This object expresses the maxinum time to wait next number. The default value of this object is 5000 milliseconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1000..50000  

hwVoDigitalIfR2TimeoutReleaseApprove 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.13
This object expresses the maxinum time to wait release approve. The default value of this object is 1000 milliseconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 200..3000  

hwVoDigitalIfR2TimeoutRing 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.14
This object expresses the maxinum time to wait the end of ring. The default value is 30000 milliseconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32 1000..240000  

hwVoDigitalIfR2TimeoutSendAnswer 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.15
This object expresses the maxinum time to wait Answer signal. The default value is 500 milliseconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 50..1000  

hwVoDigitalIfR2CfgBillingCategory 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.16
This object expresses the value of signal BillingCategory. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgCallingCategory 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.17
This object expresses the value of signal CallingCategory. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgCongestion 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.18
This object expresses the value of signal Congestion. The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgDemandRefused 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.19
This object expresses the value of signal DemandRefused. The default value is 12.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgDigitEnd 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.20
This object expresses the value of signal DigitEnd. The default value is 15.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgNullnum 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.21
This object expresses the value of signal Nullnum. The default value is 5.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqBillingCategory 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.22
This object expresses the value of signal requesting BillingCategory. The default value is 16.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqCallingCategory 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.23
This object expresses the value of signal requesting CallingCategory. The default value is 5.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqCurrentdigit 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.24
This object expresses the value of signal requesting Currentdigit. The default value is 16.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqFirstCallingnum 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.25
This object expresses the value of signal requesting FirstCallingnum. The default value is 5.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqFirstDigit 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.26
This object expresses the value of signal requesting FirstDigit. The default value is 16.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqNextCallednum 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.27
This object expresses the value of signal requesting NextCallednum. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqNextCallingnum 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.28
This object expresses the value of signal requesting NextCallingnum. The default value is 5.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqLastFirstDigit 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.29
This object expresses the value of signal requesting LastFirstDigit. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqLastSecondDigit 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.30
This object expresses the value of signal requesting LastSecondDigit. The default value is 7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqLastThirdDigit 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.31
This object expresses the value of signal requesting LastFirstDigit. The default value is 8.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgReqSwitchGroupB 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.32
This object expresses the value of signal requesting SwitchGroupB. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgSubscriberIdle 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.33
This object expresses the value of signal SubscriberIdle. The default value is 6.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgSubscriberBusy 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.34
This object expresses the value of signal SubscriberBusy. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2CfgDebounceTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.35
This object expresses the minimus duration the line signal to persist. The default value of this object is 10.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 10..40  

hwVoDigitalIfR2CfgSendringBackTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.36
This object expresses the minimus duration the back-ring to persist. The default value of this object is 60000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1000..90000  

hwVoDigitalIfR2CfgSendringBusyTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.37
This object expresses the minimus duration the busy-ring to persist. The default value of this object is 30000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1000..90000  

hwVoDigitalIfR2CfgPulseSignalPersistenceTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.38
This object expresses the value of PulseSignalPersistence-Timer. The default value is 150.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..3000  

hwVoDigitalIfR2CfgDlAnswerTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.39
This object expresses the value of Answer-Timer. The default value is 60000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..120000  

hwVoDigitalIfR2CfgDlClearBackTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.40
This object expresses the value of ClearBack-Timer. The default value is 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..60000  

hwVoDigitalIfR2CfgDlClearForwardTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.41
This object expresses the value of ClearForward-Timer. The default value is 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..60000  

hwVoDigitalIfR2CfgDlSeizureTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.42
This object expresses the value of Seize-Timer. The default value is 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..5000  

hwVoDigitalIfR2CfgDlReanswerTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.43
This object expresses the value of ReAnswer-Timer. The default value is 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..60000  

hwVoDigitalIfR2CfgDlReleaseGuardTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.44
This object expresses the value of ReleaseGuard-Timer. The default value is 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..60000  

hwVoDigitalIfR2CfgMfcGroupBTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.45
This object expresses the value of GroupB-Timer. The default value is 30000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..90000  

hwVoDigitalIfR2CfgAniEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.46
This object expresses the ANI is enable or disable. The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgGroupBEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.47
This object expresses the GroupB-Process is enable or disable . The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgClearForwardAckEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.48
This object expresses the ClearForwardAck-Signal is enable or disable . The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgDlSeizureAckEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.49
This object expresses the SeizureAck-Signal is enable or disable . The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgDTMFEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.50
This object expresses the DTMF is enable or disable . The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgAnswerEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.51
This object expresses the Answer-Signal is enable or disable . The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgReanswerEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.52
This object expresses the ReAnswer-Signal is enable or disable . The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgFinalCallnumEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.53
This object expresses the FinalCallnum-Signal is enable or disable . The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgForceMeteringEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.54
This object expresses the Metering-Signal is enable or disable . The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgSendRingBackEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.55
This object expresses the SendRingBack is enable or disable . The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgSendRingBusyEnable 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.56
This object expresses the SendRingBusy is enable or disable . The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoDigitalIfR2CfgReqCategoryOffset 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.57
This object expresses the value of CategoryOffset . The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

hwVoDigitalIfR2CfgReqCallingnumOffset 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.58
This object expresses the value of CallingnumOffset . The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

hwVoDigitalIfR2CfgCountryMode 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.59
This object expresses the value of CountryMode . The default value is 9.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER argentina(0), australia(1), bengal(2), brazil(3), china(4), customer(5), hongkong(6), india(7), indonesia(8), itu-t(9), korea(10), malaysia(11), mexico(12), newzealand(13), singapore(14), thailand(15)  

hwVoDigitalIfR2CfgSpecialCharacter 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.60
This object expresses the SpecialCharacter(A,B,C,D,#,*). The default value is NULL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER null(0), a(65), b(66), c(67), d(68), pound(35), asterisk(42)  

hwVoDigitalIfR2CfgSpecialSignal 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.61
This object expresses the signal of SpecialCharacter. The default value is 16.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 11..16  

hwVoDigitalIfR2CfgSelectMode 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.62
This object expresses the trunk mode to be selected. max set select trunk mode to max-mode maxpoll set select trunk mode to max-poll-mode min set select trunk mode to min-mode minpoll set select trunk mode to min-poll-mode The default value is min.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER min(1), max(2), minpoll(3), maxpoll(4)  

hwVoDigitalIfR2CfgDTMFTime 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.63
This object expresses the value of DTMF-Timer. The default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..10000  

hwVoDigitalIfR2CfgReqCallCreate 1.3.6.1.4.1.2011.5.25.1.4.3.1.1.64
This object expresses the value of signal callcreate in group-a. The default value is 6.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

hwVoDigitalIfR2ABCDCfgTable 1.3.6.1.4.1.2011.5.25.1.4.3.2
The voice digital interface r2 abcd configuration table contains information about abcd bits configuration parameters for digital r2 voice interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoDigitalIfR2ABCDCfgEntry

hwVoDigitalIfR2ABCDCfgEntry 1.3.6.1.4.1.2011.5.25.1.4.3.2.1
An entry in the voice digital interface r2 abcd configuration table. The entry is automatically created when a digital voice interface is configed for digital r2 signal.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoDigitalIfR2ABCDCfgEntry  

hwVoDigitalIfR2ABCDCfgPortNumber 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.1
Index of voice digital interface r2 abcd config table. It identify the number of the voice port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoDigitalIfR2ABCDCfgGroupNumber 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.2
Index of voice digital interface r2 abcd config table. It identify the number of the ds0 group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..30  

hwVoDigitalIfR2ABCDReverseABCD 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.3
This object expresses whether or not the a b c d bits should be invert. '0' : disable invert. '1' : enable invert. The default value is '0000'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRenewABCD 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.4
This object expresses the unused a b c d bits to be sent. The default value is '1111'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRxIdle 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.5
This object expresses the idle line signal bits to be received. The default value is '1001'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDTxIdle 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.6
This object expresses the idle line signal bits to be sent. The default value is '1001'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRxSeizure 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.7
This object expresses the seizure line signal bits to be received. The default value is '0001'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDTxSeizure 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.8
This object expresses the seizure line signal bits to be sent. The default value is '0001'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRxSeizureAck 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.9
This object expresses the seizureAck line signal bits to be received. The default value is '1101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDTxSeizureAck 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.10
This object expresses the seizureAck line signal bits to be sent. The default value is '1101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRxAnswer 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.11
This object expresses the answer line signal bits to be received. The default value is '0101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDTxAnswer 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.12
This object expresses the answer line signal bits to be sent. The default value is '0101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRxClearForward 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.13
This object expresses the ClearForward line signal bits to be received. The default value is '1001'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDTxClearForward 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.14
This object expresses the ClearForward line signal bits to be sent. The default value is '1001'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRxClearBack 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.15
This object expresses the ClearBackward line signal bits to be received. The default value is '1101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDTxClearBack 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.16
This object expresses the ClearBackward line signal bits to be sent. The default value is '1101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRxReleaseGuard 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.17
This object expresses the ReleaseGuard line signal bits to be received. The default value is '1001'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDTxReleaseGuard 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.18
This object expresses the ReleaseGuard line signal bits to be sent. The default value is '1001'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDRxBlocking 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.19
This object expresses the Blocking line signal bits to be received. The default value is '1101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hwVoDigitalIfR2ABCDTxBlocking 1.3.6.1.4.1.2011.5.25.1.4.3.2.1.20
This object expresses the Blocking line signal bits to be sent. The default value is '1101'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)