HUAWEI-SYS-MAN-MIB

File: HUAWEI-SYS-MAN-MIB.mib (115819 bytes)

Imported modules

ENTITY-MIB P-BRIDGE-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC HUAWEI-MIB

Imported symbols

PhysicalIndex entPhysicalIndex entPhysicalName
EnabledStatus OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP Integer32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE IpAddress
Unsigned32 RowPointer DateAndTime
DisplayString RowStatus TEXTUAL-CONVENTION
hwDatacomm

Defined Types

HWPatchErrorType  
description.
TEXTUAL-CONVENTION    
  INTEGER initNoMemory(1), initMemProtectFail(2), fetchInputIsNull(5), fetchFlagNotSame(6), fetchProgVerInvalid(7), fetchProgCrcInvalid(8), fetchPatNoInvalid(9), fetchTotalNumInvalid(10), fetchUnitCrcInvalid(11), fetchFuncNumTooMany(12), fetchTypeInvalid(13), fetchCommonAfterTemp(14), fetchLengthNotSuited(15), fetchCodeAddrNotSuited(16), fetchDataAddrNotSuited(17), fetchBaseAddrNotSuited(18), fetchCodeLenOverflow(19), fetchDataLenOverflow(20), fetchOldAfterIndependent(103), fetchUpdateDependency(104), chgproChangeModeFailed(30), activeNumInvalid(40), activeHasBeenActived(41), activeNotExist(42), activeStateInvalid(43), activeCodeAddrNotSuited(44), activeDataAddrNotSuited(45), activeBaseAddrNotSuited(46), activeFormatUnknown(47), runNumInvalid(55), runHasInRunning(56), runNotActive(57), runIdleState(58), runBadState(59), deactNumInvalid(70), deactRunOrActive(71), deactRunningState(72), deactBadState(73), removeNumInvalid(80), removeHasInIdle(81), removeBadStatus(82), caclcrcFileCrcInvalid(90), caclcrcUnitCrcInvalid(91), caclcrcOutputIsNull(92), caclcrcNumInvalid(93), caclcrcBadUnitCrc(95), showNumInvalid(100), showCodeLenIsZero(101), showDataLenIsZero(102), addlistBadParam(105), addlistMemAllocFail(106), depToListBadParamDep(107), depToListBadParamList(108), depToListMemFreeFail(109), depToListAddItemFail(110), listToDepBadParamDep(111), listToDepBadParamList(112), listToDepBadParamDepCount(113), updateDepBadParam(114), updateDepMemAllocFail(115), updateDepDepToListFail(116), updateDepToInterFail(117), updateDepFromInterFail(118), updateDepListToDepFail(119), depToInterBadParam(120), depToInterInvalidNo(121), depToInterAddFail(122), interToDepBadParam(123), interToDepAppendFail(124), appendListBadParam(125), appendListAddFail(126), indActiveBadParam(127), indActiveAlreadyActive(128), indActiveListFail(129), indActiveListGenFail(130), indActiveListAppendFail(131), indActiveMemFreeFail(132), indActiveDepIdle(133), indActiveDepInvalid(134), indActiveCodeAddrNotSuited(135), indActiveDataAddrNotSuited(136), indActiveBaseAddrNotSuited(137), indActiveNotLoaded(138), indActiveFuncFail(139), indPatchFileNoInd(140), indRunFail(141), indDeactiveFail(142), indRemoveFail(143), indGetDepOfPara(144), indGetDepOnPara(145), indGetDepOnFail(146), fetchBufferPara(147), fetchBufferFail(148), getStatePara(149), indActiveAlreadyRunning(150), indFreeListInputNull(151), indFreeListMemFreeErr(152), indBitTblToArrayInputNull(153), indBitTblToArrayFreeFail(154), indBitTblToArrayAllocFail(155), indBitTblToArrayBitsetMore(156), indBitTblToArrayBitsetLess(157), listToDepBadParamAllocFail(158), listToDepBadParamFreeFail(159), indDeactiveFreeNull(160), indRemoveFreeFail(161), getInfoBufNull(162), getInfoOutputNull(163), getInfoFlagNotSame(164), getInfoProgCrcInvalid(165), getInfoFileCrcInvalid(166), getInfoUnitCrcInvalid(167), indPatchOpNotconfig(169), normalOpNotconfig(170), indDeactiveDeative(173), indDeactiveRunning(174), indDeactiveInvalid(176), indRunDeactive(177), indRunRunning(178), indRunIdle(179), indRunInvalid(180), indActiveIdle(171), indActiveInvalid(172), indFetchActive(183), indFetchRunning(185), indFetchDeactive(184), indFetchInvalid(186), indRemoveIdle(181), indRemoveInvalid(182), patchFileNotExist(187), patchRestoreFailed(188), patchPackageError(189), patchMisoperation(190), unknown(65535)  

HwSysCurEntry  
SEQUENCE    
  hwSysCurEntPhysicalIndex Integer32
  hwSysCurCFGFileIndex Integer32
  hwSysCurImageIndex Integer32
  hwSysCurPafFileIndex Integer32
  hwSysCurLicenseIndex Integer32
  hwSysCurPatchFileIndex Integer32
  hwSysCurVoiceFileIndex Integer32

HwSysReloadScheduleEntry  
SEQUENCE    
  hwSysReloadScheduleIndex Integer32
  hwSysReloadEntity PhysicalIndex
  hwSysReloadCfgFile Integer32
  hwSysReloadImage Integer32
  hwSysReloadReason DisplayString
  hwSysReloadScheduleTime DateAndTime
  hwSysReloadRowStatus RowStatus
  hwSysReloadPafFile Integer32
  hwSysReloadLicenseFile Integer32
  hwSysReloadPatchFile Integer32
  hwSysReloadPatchState INTEGER
  hwSysReloadOperateDestType INTEGER
  hwSysReloadOperateDestIndex DisplayString
  hwSysReloadVoiceFile Integer32
  hwSysReloadAndroidFile Integer32

HwSysSlaveSwitchEntry  
SEQUENCE    
  hwSysSlaveSwitchIndex Integer32
  hwSysSlaveSwitchChassisNum DisplayString
  hwSysSlaveSwitchOperType INTEGER
  hwSysSlaveSwitchEnableStatus EnabledStatus
  hwSysSlaveSwitchSrc DisplayString
  hwSysSlaveSwitchDst DisplayString

HwSysImageEntry  
SEQUENCE    
  hwSysImageIndex Integer32
  hwSysImageName DisplayString
  hwSysImageSize Integer32
  hwSysImageLocation DisplayString
  hwSysImageVersion DisplayString
  hwSysImageReason DisplayString

HwSysCFGFileEntry  
SEQUENCE    
  hwSysCFGFileIndex Integer32
  hwSysCFGFileName DisplayString
  hwSysCFGFileSize Integer32
  hwSysCFGFileLocation DisplayString
  hwSysCFGFileReason DisplayString

HwSysPafFileEntry  
SEQUENCE    
  hwSysPafFileIndex Integer32
  hwSysPafFileName DisplayString
  hwSysPafFileSize Integer32
  hwSysPafFileLocation DisplayString
  hwSysPafFileVersion DisplayString

HwSysLicenseFileEntry  
SEQUENCE    
  hwSysLicenseFileIndex Integer32
  hwSysLicenseFileName DisplayString
  hwSysLicenseFileSize Integer32
  hwSysLicenseFileLocation DisplayString

HwPatchFileEntry  
SEQUENCE    
  hwPatchFileIndex Unsigned32
  hwPatchFileName DisplayString
  hwPatchFileSize Integer32
  hwPatchFileLocation DisplayString
  hwPatchFileVersion DisplayString

HwLoadPatchEntry  
SEQUENCE    
  hwPatchLoadDestType INTEGER
  hwPatchLoadDestIndex DisplayString
  hwPatchLoadState INTEGER
  hwLoadPatchRowState RowStatus

HwPatchEntry  
SEQUENCE    
  hwPatchSlotIndex Integer32
  hwPatchIndex Unsigned32
  hwPatchUsedFileName DisplayString
  hwPatchVersion DisplayString
  hwPatchDescription DisplayString
  hwPatchProgramVersion DisplayString
  hwPatchFuncNum Integer32
  hwPatchTextLen Integer32
  hwPatchDataLen Integer32
  hwPatchType INTEGER
  hwPatchBuildTime DateAndTime
  hwPatchActiveTime DateAndTime
  hwPatchAdminStatus INTEGER
  hwPatchOperateState INTEGER
  hwPatchOperateDestType INTEGER
  hwPatchOperateDestIndex DisplayString

HwPatchStateEntry  
SEQUENCE    
  hwPatchNumMax Unsigned32
  hwPatchIdleNum Integer32
  hwPatchTextMax Integer32
  hwPatchDataMax Integer32
  hwPatchStateTextUsed Integer32
  hwPatchStateDataUsed Integer32
  hwPatchStateTotalPatchNum Integer32
  hwPatchStateTempPatchNum Integer32
  hwPatchStateCommonPatchNum Integer32
  hwPatchStateRuningPatchNum Integer32
  hwPatchStateActivePatchNum Integer32
  hwPatchStateDeactivePatchNum Integer32

HwPatchHistoryEntry  
SEQUENCE    
  hwPatchHistoryIndex Unsigned32
  hwPatchHistoryProgrameVersion DisplayString
  hwPatchHistoryVersion DisplayString
  hwSlotId Integer32
  hwPatchBeginIndex Integer32
  hwPatchEndIndex Integer32
  hwPatchHistoryAction INTEGER
  hwPatchHistoryBeginTime DateAndTime
  hwPatchHistoryEndTime DateAndTime

HwPatchErrorEntry  
SEQUENCE    
  hwPatchErrorIndex Unsigned32
  hwPatchErrorSlot Unsigned32
  hwPatchErrorPatchFileName DisplayString
  hwPatchErrorPatchIndex Unsigned32
  hwPatchErrorCode HWPatchErrorType

HwBootRomEntry  
SEQUENCE    
  hwBootRomIndex INTEGER
  hwBootRomBootDevice DisplayString
  hwBootRomProcessorNo Integer32
  hwBootRomHostName DisplayString
  hwBootRomFileName DisplayString
  hwBootRomIpOnEthernet IpAddress
  hwBootRomIpOnBackPlane IpAddress
  hwBootRomHostIp IpAddress
  hwBootRomGatewayIp IpAddress
  hwBootRomUserName DisplayString
  hwBootRomPassword DisplayString
  hwBootRomTargetName DisplayString
  hwBootRomStartupScript DisplayString
  hwBootRomXModemBaudRate Integer32
  hwBootRomVersion Integer32

HwSysUpgradeEntry  
SEQUENCE    
  hwIssuIndex Integer32
  hwIssuMode INTEGER
  hwIssuImageFile DisplayString
  hwIssuPafFile DisplayString
  hwIssuLicenseFile DisplayString
  hwIssuPatchFile DisplayString

HwSysSourceIndexEntry  
SEQUENCE    
  hwSysFileType INTEGER
  hwSysFileName OCTET STRING
  hwSysFileIndex Integer32

HwSysRebootRecordEntry  
SEQUENCE    
  hwSysRebootRecordIndex Integer32
  hwSysRebootReason INTEGER
  hwSysRebootTime DateAndTime

HwSysSwitchoverStateEntry  
SEQUENCE    
  hwSysSwitchoverStateIndex Integer32
  hwSysSwitchoverSlotId Integer32
  hwSysSwitchoverBoardType INTEGER
  hwSysSwitchoverInfo OCTET STRING

HwSysSwitchoverStateMultiEntry  
SEQUENCE    
  hwSysMultiSwtStateIndex Integer32
  hwSysMultiSwtChassisId OCTET STRING
  hwSysMultiSwtSlotId Integer32
  hwSysMultiSwtBoardType INTEGER
  hwSysMultiSwtInfo OCTET STRING

HwSysVoiceFileEntry  
SEQUENCE    
  hwSysVoiceFileIndex Integer32
  hwSysVoiceFileName DisplayString
  hwSysVoiceFileSize Integer32
  hwSysVoiceFileLocation DisplayString

HwSysAndroidFileEntry  
SEQUENCE    
  hwSysAndroidFileIndex Integer32
  hwSysAndroidFileName DisplayString
  hwSysAndroidFileSize Integer32
  hwSysAndroidFileLocation DisplayString
  hwSysAndroidFileReason DisplayString

Defined Values

huaweiSystemManMIB 1.3.6.1.4.1.2011.5.25.19
The HUAWEI-SYS-MAN-MIB contains objects to manage the system. The module defines the information about system, such as system time, the current configuration file and system image file, system reload actions, and notifications. By querying the system time, configuration files and system image files, NMS can reboot the device in the specified time and the specified configuration and system image.
MODULE-IDENTITY    

huaweiSystemManMIBObjects 1.3.6.1.4.1.2011.5.25.19.1
OBJECT IDENTIFIER    

hwSysClock 1.3.6.1.4.1.2011.5.25.19.1.1
OBJECT IDENTIFIER    

hwSysLocalClock 1.3.6.1.4.1.2011.5.25.19.1.1.1
This object indicates the local time of the device.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwSysCurrent 1.3.6.1.4.1.2011.5.25.19.1.2
OBJECT IDENTIFIER    

hwSysCurTable 1.3.6.1.4.1.2011.5.25.19.1.2.1
The current status of system. A configuration file and an image file are used to describe the current status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysCurEntry

hwSysCurEntry 1.3.6.1.4.1.2011.5.25.19.1.2.1.1
An entry of hwSysCurTable. It is indexed by hwSysCurEntPhysicalIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysCurEntry  

hwSysCurEntPhysicalIndex 1.3.6.1.4.1.2011.5.25.19.1.2.1.1.1
The value of this object identifies the system index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysCurCFGFileIndex 1.3.6.1.4.1.2011.5.25.19.1.2.1.1.2
The value of this object identifies the index of the configuration file in the configuration file list. The value is referenced from hwSysCFGFileTable. The value ranges from 1 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysCurImageIndex 1.3.6.1.4.1.2011.5.25.19.1.2.1.1.3
The value of this object identifies the index of the image file in the image file list. The value is referenced from hwSysImageTable. The value ranges from 1 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysCurPafFileIndex 1.3.6.1.4.1.2011.5.25.19.1.2.1.1.4
The value of this object identifies the index of the PAF file in the PAF file list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysCurLicenseIndex 1.3.6.1.4.1.2011.5.25.19.1.2.1.1.5
The value of this object identifies the index of the license file in the license file list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysCurPatchFileIndex 1.3.6.1.4.1.2011.5.25.19.1.2.1.1.6
The value of this object identifies the index of the patch file in the patch file list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysCurVoiceFileIndex 1.3.6.1.4.1.2011.5.25.19.1.2.1.1.7
The value of this object identifies the index of the configuration file in the configuration file list. The value is referenced from hwSysCFGFileTable. The value ranges from 1 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysReload 1.3.6.1.4.1.2011.5.25.19.1.3
OBJECT IDENTIFIER    

hwSysReloadSchedule 1.3.6.1.4.1.2011.5.25.19.1.3.1
The value of this object identifies the record number used when the device restarts. The value ranges from 0 to 2147483647. After the system restarts, the value returns to 0. 0: initial value. 65536: main board schedule method.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysReloadAction 1.3.6.1.4.1.2011.5.25.19.1.3.2
The value of this object identifies restart types. 1: reloadUnavailable 2: reloadOnSchedule, indicating periodical restart 3: reloadAtOnce, indicating immediate restart without considering hwSysReloadScheduleTime 4: reloadCancel, indicating that all the planned restart activities are cancelled. If hwSysReloadSchedule is invalid or the rows that hwSysReloadScheduleEntry and hwSysReloadSchedule point to are not activated, all the restart activities are ignored and an inconsistent value is returned. When the restart of the system is complete or no restart activities exist, the value of this object is reloadUnavailable(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reloadUnavailable(1), reloadOnSchedule(2), reloadAtOnce(3), reloadCancel(4)  

hwSysReloadScheduleTable 1.3.6.1.4.1.2011.5.25.19.1.3.3
A reload parameters table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysReloadScheduleEntry

hwSysReloadScheduleEntry 1.3.6.1.4.1.2011.5.25.19.1.3.3.1
Entry of hwSysReloadScheduleTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysReloadScheduleEntry  

hwSysReloadScheduleIndex 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.1
The value of this object identifies the index of the instance. The value ranges from 0 to 2147483647.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysReloadEntity 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.2
This object indicates the index of the restarting entity. The value is referred to from entPhysicalTable. 1. When get/get-next, 1 means active main board, 2 means slave main board, 65535 means other board. 2. When set, 2 means slave main board, other values mean active main board.
Status: current Access: read-create
OBJECT-TYPE    
  PhysicalIndex  

hwSysReloadCfgFile 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.3
The value of this object identifies the configuration file used after the restart. The value is limited by hwSysCFGFileTable. The value ranges from 0 to 2147483647. The default value is 0, which means the configuration file remains unchanged.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysReloadImage 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.4
The value of this object identifies the image file used after the restart. The value is limited by hwSysImageTable. The value ranges from 1 to 2147483647.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysReloadReason 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.5
This object indicates the cause of the restart. The value is a string of 0 to 255 characters. After the system restarts, the character string is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

hwSysReloadScheduleTime 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.6
This object indicates the time of the restart. The only valid value of this object is an 8-byte string which indicates the local time of the switch. The maximum scheduled time is 30 days from the current system clock time. If the value set is earlier than the value of hwSysLocalClock or beyond the maximum scheduled time limit, a bad value error occurred. The value of all-zero octet strings indicates system restart at once if the reload action is reloadOnSchedule(1).
Status: current Access: read-create
OBJECT-TYPE    
  DateAndTime Size(8)  

hwSysReloadRowStatus 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.7
If one of values of hwSysReloadEntity, hwSysReloadCfgFile and hwSysReloadImage is invalid, the value of hwSysReloadRowStatus cannot be set to 'active'. A valid entry means the specified element is available in the current system. Reload an entity indexed by hwSysReloadEntity with the startup configuration file and the image may be not allowed. Herein the entry is invalid.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwSysReloadPafFile 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.8
The value of this object identifies the PAF file used after the restart.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwSysReloadLicenseFile 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.9
The value of this object identifies the license file used after the restart.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwSysReloadPatchFile 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.10
The value of this object identifies the patch file used after the restart.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwSysReloadPatchState 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.11
The value of this object identifies the running status of the patch at the next startup. That is, whether the loaded patch is in the Run state at the next startup. run(1): indicates that the loaded patch is in the Run state at the next startup. unused(255): indicates that the loaded patch is in the original state at the next startup.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER run(1), unused(255)  

hwSysReloadOperateDestType 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.12
This object indicates the object to be restarted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(1), slave(2), chassis(3), unused(4)  

hwSysReloadOperateDestIndex 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.13
This object indicates the index of the board needs to be restarted. The get/get-next result is 'unused'. but, you can't use 'unused' to set.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

hwSysReloadVoiceFile 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.14
The value of this object identifies the license file used after the restart.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwSysReloadAndroidFile 1.3.6.1.4.1.2011.5.25.19.1.3.3.1.15
The value of this object identifies the android file used after the restart. The value is limited by hwSysAndroidFileTable. The value ranges from 0 to 2147483647. The default value is 0, which means the android file remains unchanged.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysReboot 1.3.6.1.4.1.2011.5.25.19.1.3.4
The value of this object identifies the restart of the master and slave boards. Values are as follows unused(1): indicates that this value is not used. Generally, this value is read. rebootAllRoute(2): indicates that the integrated device is restarted. rebootSlave(3): indicates that the slave board is restarted. slaveSwitch(4): indicates that the switchover between the main and slave boards is performed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unused(1), rebootWholeRoute(2), rebootSlave(3), slaveSwitch(4)  

hwSysSlaveSwitchEnable 1.3.6.1.4.1.2011.5.25.19.1.3.5
The value of this object identifies whether the switchover between the main and the slave boards is enabled. enable(1): indicates that the switchover between the main and slave boards is enabled. disable(2): indicates that the switchover between the main and slave boards is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwSysLatestRebootErrorInfo 1.3.6.1.4.1.2011.5.25.19.1.3.6
This object indicates the cause of the last restart.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysSlaveSwitchTable 1.3.6.1.4.1.2011.5.25.19.1.3.7
A slave switchover enable parameters table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysSlaveSwitchEntry

hwSysSlaveSwitchEntry 1.3.6.1.4.1.2011.5.25.19.1.3.7.1
Entry of hwSysSlaveSwitchTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysSlaveSwitchEntry  

hwSysSlaveSwitchIndex 1.3.6.1.4.1.2011.5.25.19.1.3.7.1.1
The value of the object identifies the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..80  

hwSysSlaveSwitchChassisNum 1.3.6.1.4.1.2011.5.25.19.1.3.7.1.2
The value of the object identifies the chassis number.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hwSysSlaveSwitchOperType 1.3.6.1.4.1.2011.5.25.19.1.3.7.1.3
Operation type. The object has the following values: unused(1): means the default value. slaveswitch(2): perform force switchover. slaveswitchlock(3): enable the force switchover, this value should be used with the object of hwSysSlaveSwitchEnableStatus.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unused(1), slaveSwitch(2), slaveSwitchLock(3)  

hwSysSlaveSwitchEnableStatus 1.3.6.1.4.1.2011.5.25.19.1.3.7.1.4
The enable status of switchover for AMB (Active Main Board) and SMB (Standby Main Board). enable(1): enable the force switchover. disable(2): disable the force switchover.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwSysSlaveSwitchSrc 1.3.6.1.4.1.2011.5.25.19.1.3.7.1.5
The source slot for slave switchover.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hwSysSlaveSwitchDst 1.3.6.1.4.1.2011.5.25.19.1.3.7.1.6
The destination slot for slave switchover.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hwSysDelayReboot 1.3.6.1.4.1.2011.5.25.19.1.3.8
Restart the device at a delayed time. The delayed time can be set up to 43200 minutes. The node is used to set the delayed time, cancel the setting, or check the status of the delayed restart. If a value within the range of 0 to 43200 is entered, the delayed time is set. If the value 65535 is entered, the setting is cancelled. During system reboot, a return value 65534 is displayed if the Get or Walk operation is performed. Other values are invalid.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysImage 1.3.6.1.4.1.2011.5.25.19.1.4
OBJECT IDENTIFIER    

hwSysImageNum 1.3.6.1.4.1.2011.5.25.19.1.4.1
The value of this object identifies the number of image files. The object calculates the number of image files given by hwSysImageTable. The value ranges from 0 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysImageTable 1.3.6.1.4.1.2011.5.25.19.1.4.2
The system image management table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysImageEntry

hwSysImageEntry 1.3.6.1.4.1.2011.5.25.19.1.4.2.1
A system image entry. Each entry consists of information of a system image. hwSysImageIndex exclusively decides an image file.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysImageEntry  

hwSysImageIndex 1.3.6.1.4.1.2011.5.25.19.1.4.2.1.1
The value of this object identifies the index of the image file.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysImageName 1.3.6.1.4.1.2011.5.25.19.1.4.2.1.2
This object indicates the name of the image file. A file name containing path and suffix is a string of 4 to 64 characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysImageSize 1.3.6.1.4.1.2011.5.25.19.1.4.2.1.3
The value of this object identifies the size of the image file. The value ranges from 0 to 2147483647, in bytes. The size depends on the actual file and is limited by the physical storage device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysImageLocation 1.3.6.1.4.1.2011.5.25.19.1.4.2.1.4
This object indicates the location of the image file, namely the path.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysImageVersion 1.3.6.1.4.1.2011.5.25.19.1.4.2.1.5
The value of this object identifies the version of the image file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysImageReason 1.3.6.1.4.1.2011.5.25.19.1.4.2.1.6
The value of this object identifies the error cause of the image file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

hwSysCFGFile 1.3.6.1.4.1.2011.5.25.19.1.5
OBJECT IDENTIFIER    

hwSysCFGFileNum 1.3.6.1.4.1.2011.5.25.19.1.5.1
The value of this object identifies the number of configuration files. The object calculates the number of configuration files given by hwSysCFGFileTable. The value ranges from 0 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysCFGFileTable 1.3.6.1.4.1.2011.5.25.19.1.5.2
A table of configuration files in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysCFGFileEntry

hwSysCFGFileEntry 1.3.6.1.4.1.2011.5.25.19.1.5.2.1
A configuration file entry. Each entry consists of information of a configuration file. hwSysCFGFileIndex exclusively decides a configuration file.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysCFGFileEntry  

hwSysCFGFileIndex 1.3.6.1.4.1.2011.5.25.19.1.5.2.1.1
The value of this object identifies the index of the configuration file.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysCFGFileName 1.3.6.1.4.1.2011.5.25.19.1.5.2.1.2
This object indicates the name of the configuration file. Currently, Huawei products support two formats of configuration files, namely, .CFG and .ZIP. A file name containing path and suffix is a string of 5 to 64 characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysCFGFileSize 1.3.6.1.4.1.2011.5.25.19.1.5.2.1.3
The value of this object identifies the size of the configuration file. The value ranges from 0 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysCFGFileLocation 1.3.6.1.4.1.2011.5.25.19.1.5.2.1.4
This object indicates the location of the configuration file, namely, the path.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysCFGFileReason 1.3.6.1.4.1.2011.5.25.19.1.5.2.1.5
This object indicates the error cause of the configuration file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

hwSysPafFile 1.3.6.1.4.1.2011.5.25.19.1.6
OBJECT IDENTIFIER    

hwSysPafFileNum 1.3.6.1.4.1.2011.5.25.19.1.6.1
The value of this object identifies the number of PAF files in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysPafFileTable 1.3.6.1.4.1.2011.5.25.19.1.6.2
A table of paf files in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysPafFileEntry

hwSysPafFileEntry 1.3.6.1.4.1.2011.5.25.19.1.6.2.1
A paf file entry. Each entry consists of information of a paf file. hwSysPafFileIndex exclusively decides a configuration file.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysPafFileEntry  

hwSysPafFileIndex 1.3.6.1.4.1.2011.5.25.19.1.6.2.1.1
The value of this object identifies the index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysPafFileName 1.3.6.1.4.1.2011.5.25.19.1.6.2.1.2
This object indicates the name of the PAF file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysPafFileSize 1.3.6.1.4.1.2011.5.25.19.1.6.2.1.3
The value of this object identifies the size of the PAF file.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwSysPafFileLocation 1.3.6.1.4.1.2011.5.25.19.1.6.2.1.4
This object indicates the position of the PAF file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysPafFileVersion 1.3.6.1.4.1.2011.5.25.19.1.6.2.1.5
This object indicates the version of the PAF file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysLicenseFile 1.3.6.1.4.1.2011.5.25.19.1.7
OBJECT IDENTIFIER    

hwSysLicenseFileNum 1.3.6.1.4.1.2011.5.25.19.1.7.1
The value of this object identifies the number of license files in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysLicenseFileTable 1.3.6.1.4.1.2011.5.25.19.1.7.2
A table of license files in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysLicenseFileEntry

hwSysLicenseFileEntry 1.3.6.1.4.1.2011.5.25.19.1.7.2.1
A license file entry. Each entry consists of information of a license file. hwSysLicenseFileIndex exclusively decides a configuration file.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysLicenseFileEntry  

hwSysLicenseFileIndex 1.3.6.1.4.1.2011.5.25.19.1.7.2.1.1
The value of this object identifies the index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysLicenseFileName 1.3.6.1.4.1.2011.5.25.19.1.7.2.1.2
This object indicates the name of the license file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysLicenseFileSize 1.3.6.1.4.1.2011.5.25.19.1.7.2.1.3
This object indicates the size of the license file.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwSysLicenseFileLocation 1.3.6.1.4.1.2011.5.25.19.1.7.2.1.4
This object indicates the position of the license file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatch 1.3.6.1.4.1.2011.5.25.19.1.8
OBJECT IDENTIFIER    

hwPatchBase 1.3.6.1.4.1.2011.5.25.19.1.8.1
OBJECT IDENTIFIER    

hwPatchFileNum 1.3.6.1.4.1.2011.5.25.19.1.8.1.1
The value of this object identifies the number of patches in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwPatchRecordReset 1.3.6.1.4.1.2011.5.25.19.1.8.1.2
Clear the patch records. unused(1): unused. resetPatchHistory(2): clears the hwPatchHistoryTable record. resetPatchError(3): clears the hwPatchErrorTable record.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unused(1), resetPatchHistory(2), resetPatchError(3)  

hwPatchHistoryTableMax 1.3.6.1.4.1.2011.5.25.19.1.8.1.3
Set the size of hwPatchHistoryTable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

hwPatchTrapEnble 1.3.6.1.4.1.2011.5.25.19.1.8.1.4
The value of this object determines whether to generate the trap of HUAWEI-SYS-MAN-MIB. enable(1): Trap is enabled. disable(2): Trap is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwPatchErrorTableMax 1.3.6.1.4.1.2011.5.25.19.1.8.1.5
The value of this object identifies the maximum number of recorded errors supported by hwPatchErrorTable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

hwPatchId 1.3.6.1.4.1.2011.5.25.19.1.8.1.6
This object indicates the patch ID on the device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchLatestId 1.3.6.1.4.1.2011.5.25.19.1.8.1.7
This object indicates the latest patch ID on the device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchFailReason 1.3.6.1.4.1.2011.5.25.19.1.8.1.8
This object is an index that specifies patch fail reason.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER patchOpenErr(1), getPatchErr(2), patchSpaceShortage(3), patchConflict(4), versionErr(5), synchronizePatchPackageError(8)  

hwPatchFileTable 1.3.6.1.4.1.2011.5.25.19.1.8.2
Patch file query table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPatchFileEntry

hwPatchFileEntry 1.3.6.1.4.1.2011.5.25.19.1.8.2.1
Defines an entry in the hwPatchFileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPatchFileEntry  

hwPatchFileIndex 1.3.6.1.4.1.2011.5.25.19.1.8.2.1.1
The value of this object identifies the index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2147483647  

hwPatchFileName 1.3.6.1.4.1.2011.5.25.19.1.8.2.1.2
This object indicates the name of a patch file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchFileSize 1.3.6.1.4.1.2011.5.25.19.1.8.2.1.3
This object indicates the size of a patch file.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchFileLocation 1.3.6.1.4.1.2011.5.25.19.1.8.2.1.4
This object indicates the position of a patch file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchFileVersion 1.3.6.1.4.1.2011.5.25.19.1.8.2.1.5
This object indicates the version of the patch file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwLoadPatchTable 1.3.6.1.4.1.2011.5.25.19.1.8.4
The load table of the patch file. Load the patch file to the memory: hwSlotIndex:The slot ID of the destination device to be loaded by the patch file, hwPatchFileIndex:The index of the patch file, If hwSlotIndex is 128, it indicates all slots of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwLoadPatchEntry

hwLoadPatchEntry 1.3.6.1.4.1.2011.5.25.19.1.8.4.1
Defines an entry in the hwLoadPatchTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwLoadPatchEntry  

hwPatchLoadDestType 1.3.6.1.4.1.2011.5.25.19.1.8.4.1.1
This object indicates the type of the board to be loaded with the patch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(1), slave(2), slot(3), chassis(4), unused(5)  

hwPatchLoadDestIndex 1.3.6.1.4.1.2011.5.25.19.1.8.4.1.2
This object indicates the index of the board to be loaded with the patch.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

hwPatchLoadState 1.3.6.1.4.1.2011.5.25.19.1.8.4.1.3
Patch loading state: loading(1):Patch is loading. success(2):Patch loading succeeded. failure(3):Patch loading failed. none(4):Patch and board do not match.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER loading(1), success(2), failure(3), none(4)  

hwLoadPatchRowState 1.3.6.1.4.1.2011.5.25.19.1.8.4.1.51
This object identifies the status of a row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwPatchInfo 1.3.6.1.4.1.2011.5.25.19.1.8.5
OBJECT IDENTIFIER    

hwPatchTable 1.3.6.1.4.1.2011.5.25.19.1.8.5.1
Running status transfer and query of the patch. If hwSlotIndex is 128, it indicates all slots of the device. If hwPatchNum is 65535, it indicates all patches of the specified slot. If hwPatchNum is 0, it indicates the NP patch of the specified slot. If hwPatchNum is in range from 1 to 200, it indicates the C patch of the specified slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPatchEntry

hwPatchEntry 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1
Defines an entry in the hwPatchTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPatchEntry  

hwPatchSlotIndex 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.1
The value of this object identifies the index of the slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..255  

hwPatchIndex 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.2
This object indicates the index of the patch.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

hwPatchUsedFileName 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.3
This object indicates the name of the patch file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchVersion 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.4
This object indicates the version of the patch file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchDescription 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.5
This object indicates the description of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchProgramVersion 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.6
The value of the object identifies the version number of the host software.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchFuncNum 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.7
The value of this object identifies the number functions contained in the patch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchTextLen 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.8
The value of this object identifies the length of the patch code.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchDataLen 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.9
The value of this object identifies the length of the patch data.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchType 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.10
The value of this object identifies the patch type. hotCommon(1): indicates the common hot patch. hotTemporary(2): indicates the temporary hot patch. coolCommon(3): indicates the common cool patch. coolTemporary(4): indicates the temporary cool patch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER hotCommon(1), hotTemporary(2), coolCommon(3), coolTemporary(4)  

hwPatchBuildTime 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.11
This object indicates the time when a patch file is built.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwPatchActiveTime 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.12
This object indicates the time when a patch file is activated.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwPatchAdminStatus 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.13
The value of this object identifies the operation status of a patch. Run (1): indicates that the patch status is Run. Active(2): indicates the patch status is Active. Deactive(3): indicates the patch status is Deactive. Delete(4): indicates that the patch is deleted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER run(1), active(2), deactive(3), delete(4)  

hwPatchOperateState 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.14
status of the patch. patchRunning(1): indicates that current status of the patch is Run. patchActive(2): indicates that current status of the patch is Active. patchDeactive(3): indicates that current status of the patch is Deactive.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER patchRunning(1), patchActive(2), patchDeactive(3), patchDeleting(4)  

hwPatchOperateDestType 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.15
Patch operate object type,it combine with the hwPatchOperateDestIndex to note the operate object.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(1), slave(2), slot(3), chassis(4), unused(5)  

hwPatchOperateDestIndex 1.3.6.1.4.1.2011.5.25.19.1.8.5.1.1.16
Patch operate object index,it combine with chassis,the value of the hwPatchOperateDestType to note the operate object.hwPatchOperateDestIndex is value such as ccc1,clc2 etc.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

hwPatchStateTable 1.3.6.1.4.1.2011.5.25.19.1.8.5.2
The statistics information of the C patch area on each slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPatchStateEntry

hwPatchStateEntry 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1
Defines an entry in the hwPatchStateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPatchStateEntry  

hwPatchNumMax 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.1
The value of this object identifies the maximum number of patches.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPatchIdleNum 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.2
The value of this object identifies the number of idle patches.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchTextMax 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.3
The value of this object identifies the size of the code in the patch area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchDataMax 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.4
The value of this object identifies the size of the data in the patch area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchStateTextUsed 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.5
The value of this object identifies the size of the used code in the patch area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchStateDataUsed 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.6
The value of this object identifies the size of the used data in the patch area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchStateTotalPatchNum 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.7
The value of this object identifies the total number of used patches.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchStateTempPatchNum 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.8
The value of this object identifies the total number of used temporary patches.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchStateCommonPatchNum 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.9
The value of this object identifies the total number of used common patches.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchStateRuningPatchNum 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.10
The value of this object identifies the number of patches in the Run state in the patch area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchStateActivePatchNum 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.11
The value of this object identifies the number of patches in the Active state in the patch area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchStateDeactivePatchNum 1.3.6.1.4.1.2011.5.25.19.1.8.5.2.1.12
The value of this object identifies the number of patches in the Deactive state in the patch area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchHistoryTable 1.3.6.1.4.1.2011.5.25.19.1.8.5.3
Patch history table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPatchHistoryEntry

hwPatchHistoryEntry 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1
Defines an entry in the hwPatchHistoryTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPatchHistoryEntry  

hwPatchHistoryIndex 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.1
This object indicates the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwPatchHistoryProgrameVersion 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.2
The value of the object identifies the version number of the image file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchHistoryVersion 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.3
The value of this object identifies the version of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSlotId 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.4
The value of the object identifies the slot number of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchBeginIndex 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.5
The value of this object identifies the start ID of the loaded patch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchEndIndex 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.6
The value of this object identifies the end ID of the loaded patch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwPatchHistoryAction 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.7
The value of this object identifies the patch status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER running(1), active(2), deactive(3), delete(4)  

hwPatchHistoryBeginTime 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.8
This object indicates the start time of running the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwPatchHistoryEndTime 1.3.6.1.4.1.2011.5.25.19.1.8.5.3.1.9
This object indicates the end time of running the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwPatchErrorTable 1.3.6.1.4.1.2011.5.25.19.1.8.5.4
The error record table of patch operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPatchErrorEntry

hwPatchErrorEntry 1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1
Defines an entry in the hwPatchErrorTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPatchErrorEntry  

hwPatchErrorIndex 1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.1
This object indicates the index of the patch error.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwPatchErrorSlot 1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.2
This object indicates the number of the slot related to a patch error.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPatchErrorPatchFileName 1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.3
This object indicates the index of the patch file when the patch has an error.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwPatchErrorPatchIndex 1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.4
This object indicates the index of the patch when the patch has an error.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

hwPatchErrorCode 1.3.6.1.4.1.2011.5.25.19.1.8.5.4.1.5
This object indicates the flag of the patch error.
Status: current Access: read-only
OBJECT-TYPE    
  HWPatchErrorType  

hwBootRom 1.3.6.1.4.1.2011.5.25.19.1.11
OBJECT IDENTIFIER    

hwBootRomTable 1.3.6.1.4.1.2011.5.25.19.1.11.1
Boot ROM startup parameter query table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBootRomEntry

hwBootRomEntry 1.3.6.1.4.1.2011.5.25.19.1.11.1.1
Defines an entry in the hwBootRomTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBootRomEntry  

hwBootRomIndex 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.1
The value of this object identifies the index of the BootROM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

hwBootRomBootDevice 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.2
This object indicates the name of the BootROM startup device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwBootRomProcessorNo 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.3
The value of this object identifies the number of the BootROM processor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwBootRomHostName 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.4
The object indicates the name of the BootROM host.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwBootRomFileName 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.5
The object indicates the name of the BootROM file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwBootRomIpOnEthernet 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.6
The object indicates the IP address of the BootROM Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwBootRomIpOnBackPlane 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.7
The object indicates the IP address of the BootROM backplane.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwBootRomHostIp 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.8
The object indicates the IP address of the BootROM host.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwBootRomGatewayIp 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.9
The object indicates the IP address of the BootROM gateway.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwBootRomUserName 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.10
The object indicates the name of the BootROM user.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwBootRomPassword 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.11
The object indicates the BootROM password.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwBootRomTargetName 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.12
The object indicates the name of the BootROM target.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwBootRomStartupScript 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.13
The object indicates the BootROM startup script.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwBootRomXModemBaudRate 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.14
The value of the object identifies the baud rate for transmitting the XModem data.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwBootRomVersion 1.3.6.1.4.1.2011.5.25.19.1.11.1.1.15
Boot ROM version.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwSysUpgrade 1.3.6.1.4.1.2011.5.25.19.1.12
OBJECT IDENTIFIER    

hwSysUpgradeTable 1.3.6.1.4.1.2011.5.25.19.1.12.1
ISSU upgrade table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysUpgradeEntry

hwSysUpgradeEntry 1.3.6.1.4.1.2011.5.25.19.1.12.1.1
Defines an entry in the hwSysUpgradeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysUpgradeEntry  

hwIssuIndex 1.3.6.1.4.1.2011.5.25.19.1.12.1.1.1
Set system issu table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIssuMode 1.3.6.1.4.1.2011.5.25.19.1.12.1.1.2
Set system issu upgrade mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER issuUpgrade(1), issuPrecheck(2)  

hwIssuImageFile 1.3.6.1.4.1.2011.5.25.19.1.12.1.1.3
The name of the image file.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..127)  

hwIssuPafFile 1.3.6.1.4.1.2011.5.25.19.1.12.1.1.4
The name of the paf file.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..127)  

hwIssuLicenseFile 1.3.6.1.4.1.2011.5.25.19.1.12.1.1.5
The name of the license file.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..127)  

hwIssuPatchFile 1.3.6.1.4.1.2011.5.25.19.1.12.1.1.6
The name of the patch file.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(5..127)  

hwIssuState 1.3.6.1.4.1.2011.5.25.19.1.12.2
System issu upgrade state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noIssuUpgrading(1), issuUpgrading(2), issuExceptional(3), issuRollBackByUserCancel(4), issuRollBackByExceptional(5)  

hwIssuConditionCheck 1.3.6.1.4.1.2011.5.25.19.1.12.3
System issu upgrade condition check. The default check result is normal.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), notRealtimeBackup(2), slotAbnormal(3), configurationChange(4), otherAbnormal(5)  

hwSysSourceIndex 1.3.6.1.4.1.2011.5.25.19.1.13
OBJECT IDENTIFIER    

hwSysSourceIndexTable 1.3.6.1.4.1.2011.5.25.19.1.13.1
System file Index query table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysSourceIndexEntry

hwSysSourceIndexEntry 1.3.6.1.4.1.2011.5.25.19.1.13.1.1
Defines an entry in the hwBootRomTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysSourceIndexEntry  

hwSysFileType 1.3.6.1.4.1.2011.5.25.19.1.13.1.1.1
The value of this object is an index that indicates the type of a file.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER image(1), config(2), paf(3), license(4), patch(5)  

hwSysFileName 1.3.6.1.4.1.2011.5.25.19.1.13.1.1.2
This object is an index that indicates the name of a file on the main control board.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..110)  

hwSysFileIndex 1.3.6.1.4.1.2011.5.25.19.1.13.1.1.3
The value of this object identifies the index of a file in the specified table. If the value is 0, it indicates that this file does not exist in the specified table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysRebootInfo 1.3.6.1.4.1.2011.5.25.19.1.14
OBJECT IDENTIFIER    

hwSysRebootTimes 1.3.6.1.4.1.2011.5.25.19.1.14.1
The value of the device reboot times.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysRebootRecordTable 1.3.6.1.4.1.2011.5.25.19.1.14.2
A reboot information record table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysRebootRecordEntry

hwSysRebootRecordEntry 1.3.6.1.4.1.2011.5.25.19.1.14.2.1
Entry of hwSysReloadScheduleTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysRebootRecordEntry  

hwSysRebootRecordIndex 1.3.6.1.4.1.2011.5.25.19.1.14.2.1.1
The index of hwSysRebootRecordTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysRebootReason 1.3.6.1.4.1.2011.5.25.19.1.14.2.1.2
The reason of system's reboot.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER manual(1), powerOff(2), unknown(3), schedule(4), software(5)  

hwSysRebootTime 1.3.6.1.4.1.2011.5.25.19.1.14.2.1.3
The time at which the reboot action occurred. we will only take octet strings with length 8 for this object which indicates the local time of the switch. The maximum scheduled time is 30 days from the current system clock time. field octets contents range 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime Size(8)  

hwSysDeviceCheck 1.3.6.1.4.1.2011.5.25.19.1.15
OBJECT IDENTIFIER    

hwSysDeviceCheckStart 1.3.6.1.4.1.2011.5.25.19.1.15.1
Set system check start.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER checkStart(1)  

hwSysDeviceCheckState 1.3.6.1.4.1.2011.5.25.19.1.15.2
Get system check state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER done(1), checking(2)  

hwSysSwitchoverState 1.3.6.1.4.1.2011.5.25.19.1.19
OBJECT IDENTIFIER    

hwSysSwitchoverStateTable 1.3.6.1.4.1.2011.5.25.19.1.19.1
Get switchover state of single-chassis
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysSwitchoverStateEntry

hwSysSwitchoverStateEntry 1.3.6.1.4.1.2011.5.25.19.1.19.1.1
Entry of hwSysSwitchoverStateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysSwitchoverStateEntry  

hwSysSwitchoverStateIndex 1.3.6.1.4.1.2011.5.25.19.1.19.1.1.1
This object indicates the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysSwitchoverSlotId 1.3.6.1.4.1.2011.5.25.19.1.19.1.1.2
The value of this object identifies the slot number of the board.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysSwitchoverBoardType 1.3.6.1.4.1.2011.5.25.19.1.19.1.1.3
The value of this object identifies the type of the board.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2), systemMaster(3), systemSlave(4), issuOldMaster(5), issuNewMaster(6)  

hwSysSwitchoverInfo 1.3.6.1.4.1.2011.5.25.19.1.19.1.1.4
The value of this object descries the real-time information of HA status.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..190)  

hwSysSwitchoverStateMultiTable 1.3.6.1.4.1.2011.5.25.19.1.19.2
Get switchover state of multi-chassis
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysSwitchoverStateMultiEntry

hwSysSwitchoverStateMultiEntry 1.3.6.1.4.1.2011.5.25.19.1.19.2.1
Entry of hwSysSwitchoverStateMultiTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysSwitchoverStateMultiEntry  

hwSysMultiSwtStateIndex 1.3.6.1.4.1.2011.5.25.19.1.19.2.1.1
This object indicates the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysMultiSwtChassisId 1.3.6.1.4.1.2011.5.25.19.1.19.2.1.2
The value of this object identifies the chassis id.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwSysMultiSwtSlotId 1.3.6.1.4.1.2011.5.25.19.1.19.2.1.3
The value of this object identifies the slot number of the board.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysMultiSwtBoardType 1.3.6.1.4.1.2011.5.25.19.1.19.2.1.4
The value of this object identifies the type of the board.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2), systemMaster(3), systemSlave(4), issuOldMaster(5), issuNewMaster(6)  

hwSysMultiSwtInfo 1.3.6.1.4.1.2011.5.25.19.1.19.2.1.5
The value of this object descries the real-time information of HA status.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..190)  

hwSysVoiceFile 1.3.6.1.4.1.2011.5.25.19.1.20
OBJECT IDENTIFIER    

hwSysVoiceFileNum 1.3.6.1.4.1.2011.5.25.19.1.20.1
The value of this object identifies the number of configuration files. The object calculates the number of configuration files given by hwSysCFGFileTable. The value ranges from 0 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysVoiceFileTable 1.3.6.1.4.1.2011.5.25.19.1.20.2
A table of configuration files in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysVoiceFileEntry

hwSysVoiceFileEntry 1.3.6.1.4.1.2011.5.25.19.1.20.2.1
A configuration file entry. Each entry consists of information of a configuration file. hwSysCFGFileIndex exclusively decides a configuration file.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysVoiceFileEntry  

hwSysVoiceFileIndex 1.3.6.1.4.1.2011.5.25.19.1.20.2.1.1
The value of this object identifies the index of the configuration file.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysVoiceFileName 1.3.6.1.4.1.2011.5.25.19.1.20.2.1.2
This object indicates the name of the configuration file. Currently, Huawei products support two formats of configuration files, namely, .CFG and .ZIP. A file name containing path and suffix is a string of 4 to 64 characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysVoiceFileSize 1.3.6.1.4.1.2011.5.25.19.1.20.2.1.3
The value of this object identifies the size of the configuration file. The value ranges from 0 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysVoiceFileLocation 1.3.6.1.4.1.2011.5.25.19.1.20.2.1.4
This object indicates the location of the configuration file, namely, the path.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysWlanApUpgrade 1.3.6.1.4.1.2011.5.25.19.1.24
OBJECT IDENTIFIER    

hwSysWlanApUpgradeCmd 1.3.6.1.4.1.2011.5.25.19.1.24.1
OBJECT IDENTIFIER    

hwSysWlanApUpgradeMode 1.3.6.1.4.1.2011.5.25.19.1.24.1.1
The value of this object identifies the ap upgrade mode. The value ranges from 1 to 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftp(1), sftp(2), tftp(3)  

hwSysWlanApUpgradeFileName 1.3.6.1.4.1.2011.5.25.19.1.24.1.2
The value of this object identifies the filename of the ap upgrade file. The value ranges from 1 to 127.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..127)  

hwSysWlanApUpgradeServerIp 1.3.6.1.4.1.2011.5.25.19.1.24.1.3
The value of this object identifies server ip address in ipv4 format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSysWlanApUpgradeServerUserName 1.3.6.1.4.1.2011.5.25.19.1.24.1.4
The value of this object identifies the username of server. The value ranges from 0 to 31.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

hwSysWlanApUpgradeServerPassword 1.3.6.1.4.1.2011.5.25.19.1.24.1.5
The value of this object identifies the password of server. The value ranges from 0 to 63.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

hwSysWlanApUpgradeStatus 1.3.6.1.4.1.2011.5.25.19.1.24.2
OBJECT IDENTIFIER    

hwSysWlanApUpgradeProgressStatus 1.3.6.1.4.1.2011.5.25.19.1.24.2.1
The value of this object identifies the status of the upgrade or the last result of the upgrade. The value ranges from 0 to 10.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER updating(0), updateSuccessful(1), updateFailed(2), failToDownloadFile(4), efsAndVersionMismatched(5), invalidFileName(6), efsAndApTypeMismatched(7), fileContentError(8), writingMemoryError(9), noUpdateResult(10)  

hwSysWlanApUpgradeLoadProgress 1.3.6.1.4.1.2011.5.25.19.1.24.2.2
The value of this object identifies the progress of file downloading. The value ranges from 0 to 100.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

hwSysWlanApUpgradeStorageProgress 1.3.6.1.4.1.2011.5.25.19.1.24.2.3
The value of this object identifies the progress of file storaging. The value ranges from 0 to 100.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

hwSysWlanApUpgradeNotifications 1.3.6.1.4.1.2011.5.25.19.1.24.3
OBJECT IDENTIFIER    

hwSysWlanApUpgradeBeginNotify 1.3.6.1.4.1.2011.5.25.19.1.24.3.1
This notification occurs when ap begin to update.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwSysWlanApUpgradeResultNotify 1.3.6.1.4.1.2011.5.25.19.1.24.3.2
This notification occurs when ap has updated successfully or failed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwSysWlanApUpgradeUbootNotMatchNotify 1.3.6.1.4.1.2011.5.25.19.1.24.3.3
This notification occurs when ap uboot not match version.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwSysWlanApUpgradeAssistantPackageNotMatchNotify 1.3.6.1.4.1.2011.5.25.19.1.24.3.4
This notification occurs when ap upgrade-assistant-package not match version.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwSysAndroidFile 1.3.6.1.4.1.2011.5.25.19.1.25
OBJECT IDENTIFIER    

hwSysAndroidFileNum 1.3.6.1.4.1.2011.5.25.19.1.25.1
The value of this object identifies the number of Android files. The object calculates the number of android files given by hwSysAndroidFileTable. The value ranges from 0 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysAndroidFileTable 1.3.6.1.4.1.2011.5.25.19.1.25.2
A table of android files in this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSysAndroidFileEntry

hwSysAndroidFileEntry 1.3.6.1.4.1.2011.5.25.19.1.25.2.1
A android file entry. Each entry consists of information of a android file. hwSysAndroidFileIndex exclusively decides a android file.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSysAndroidFileEntry  

hwSysAndroidFileIndex 1.3.6.1.4.1.2011.5.25.19.1.25.2.1.1
The value of this object identifies the index of the android file.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwSysAndroidFileName 1.3.6.1.4.1.2011.5.25.19.1.25.2.1.2
This object indicates the name of the android file. Currently, Huawei products support one format of android files, namely, .BIN. A file name containing path and suffix is a string of 4 to 64 characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysAndroidFileSize 1.3.6.1.4.1.2011.5.25.19.1.25.2.1.3
The value of this object identifies the size of the android file. The value ranges from 0 to 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwSysAndroidFileLocation 1.3.6.1.4.1.2011.5.25.19.1.25.2.1.4
This object indicates the location of the android file, namely, the path.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwSysAndroidFileReason 1.3.6.1.4.1.2011.5.25.19.1.25.2.1.5
This object indicates the error cause of the android file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

huaweiSystemManMIBNotifications 1.3.6.1.4.1.2011.5.25.19.2
OBJECT IDENTIFIER    

hwSysClockChangedNotification 1.3.6.1.4.1.2011.5.25.19.2.1
This object indicates the notification sent when the system clock changes. When the system clock changes, this trap is triggered. For example, the system clock is changed through command lines.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysReloadNotification 1.3.6.1.4.1.2011.5.25.19.2.2
This object indicates the restart notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysMasterHDError 1.3.6.1.4.1.2011.5.25.19.2.3
When the hard disk on master board cannot be read and written because of a certain error, the hard disk on master board is unregistered and the notification is sent.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysSlaveHDError 1.3.6.1.4.1.2011.5.25.19.2.4
When the hard disk on slave board cannot be read and written because of a certain error, the hard disk on slave board is unregistered and the notification is sent.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPatchTrap 1.3.6.1.4.1.2011.5.25.19.2.5
OBJECT IDENTIFIER    

hwPatchErrorTrap 1.3.6.1.4.1.2011.5.25.19.2.5.1
The trap is generated when the patch operation error occurs.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPatchActiveOverTimeTrap 1.3.6.1.4.1.2011.5.25.19.2.5.2
The patch is not run within 24 hours after it is activated.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPatchMalfunctionComebackTrap 1.3.6.1.4.1.2011.5.25.19.2.5.3
The patch operation is restored.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPatchUpdateTrap 1.3.6.1.4.1.2011.5.25.19.2.5.4
The patch state change notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysMasterCfcardError 1.3.6.1.4.1.2011.5.25.19.2.6
When the cfcard on master board can't be read and written because of some error, the Cfcard on master board will be unregistered and the notification is sent.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysSlaveCfcardError 1.3.6.1.4.1.2011.5.25.19.2.7
When the cfcard on slave board can't be read and written because of some error, the Cfcard on slave board will be unregistered and the notification is sent.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysSlaveSwitchSuccessNotification 1.3.6.1.4.1.2011.5.25.19.2.8
This object indicates that the hwSysSlaveSwitchChassisNum chassis is successfully switched.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysSlaveSwitchFailNotification 1.3.6.1.4.1.2011.5.25.19.2.9
This object indicates that the hwSysSlaveSwitchChassisNum chassis fails to be switched.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysIssuNotification 1.3.6.1.4.1.2011.5.25.19.2.10
When the ISSU upgrade over, it will send success or failed message.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPatchInstallFail 1.3.6.1.4.1.2011.5.25.19.2.11
The patch package install fail notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPatchInstallFailClear 1.3.6.1.4.1.2011.5.25.19.2.12
The patch package install fail clear notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSumUpgradeSuccess 1.3.6.1.4.1.2011.5.25.19.2.13
The patch package upgrade success notification
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysCfgFileErrorNotification 1.3.6.1.4.1.2011.5.25.19.2.14
This object notifies that some error occurs when the configuration file is specified as the next startup configuration file.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysImageErrorNotification 1.3.6.1.4.1.2011.5.25.19.2.15
The image file upgrade fail notification. The first hwSysImageName indicates the current image file, and the second hwSysImageName indicates the next startup image file.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysPafChangeNotification 1.3.6.1.4.1.2011.5.25.19.2.16
This object indicates the notification sent when the system PAF file changes.The hwSysPafFileName indicates system PAF file, and the hwSysReloadEntity indicates the board type(1 means main board,2 means slave main board).
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSysLicenseChangeNotification 1.3.6.1.4.1.2011.5.25.19.2.17
This object indicates the notification sent when the system license file changes.The hwSysLicenseFileName indicates the system license file, and the hwSysReloadEntity indicates the board type(1 means main board,2 means slave main board).
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSystemBoardExclude 1.3.6.1.4.1.2011.5.25.19.2.18
The board(s) excluded during software upgrading
Status: current Access: read-only
NOTIFICATION-TYPE    

hwSystemBoardExcludeClear 1.3.6.1.4.1.2011.5.25.19.2.19
The board(s) excluded retrieved during software upgrading
Status: current Access: read-only
NOTIFICATION-TYPE    

huaweiSystemManMIBConformance 1.3.6.1.4.1.2011.5.25.19.3
OBJECT IDENTIFIER    

huaweiSystemManMIBCompliances 1.3.6.1.4.1.2011.5.25.19.3.1
OBJECT IDENTIFIER    

huaweiSystemManMIBCompliance 1.3.6.1.4.1.2011.5.25.19.3.1.1
The compliance statement for entities which implement the Huawei system management MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

huaweiSystemManMIBGroups 1.3.6.1.4.1.2011.5.25.19.3.2
OBJECT IDENTIFIER    

huaweiSysClockGroup 1.3.6.1.4.1.2011.5.25.19.3.2.1
A collection of objects providing mandatory system reload.
Status: current Access: read-only
OBJECT-GROUP    

huaweiSysReloadGroup 1.3.6.1.4.1.2011.5.25.19.3.2.2
A collection of objects providing mandatory system clock information.
Status: current Access: read-only
OBJECT-GROUP    

huaweiSysImageGroup 1.3.6.1.4.1.2011.5.25.19.3.2.3
A collection of objects providing mandatory system image information.
Status: current Access: read-only
OBJECT-GROUP    

huaweiSysCFGFileGroup 1.3.6.1.4.1.2011.5.25.19.3.2.4
A collection of objects providing mandatory system configureation file information.
Status: current Access: read-only
OBJECT-GROUP    

hwSysCurGroup 1.3.6.1.4.1.2011.5.25.19.3.2.5
A collection of system current status.
Status: current Access: read-only
OBJECT-GROUP    

huaweiSystemManNotificationGroup 1.3.6.1.4.1.2011.5.25.19.3.2.6
A collection of notification.
Status: current Access: read-only
NOTIFICATION-GROUP    

huaweiSystemHDNotificationGroup 1.3.6.1.4.1.2011.5.25.19.3.2.7
A collection of notification about system hard disk.
Status: current Access: read-only
NOTIFICATION-GROUP    

hwPatchLoadGroup 1.3.6.1.4.1.2011.5.25.19.3.2.8
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwPatchTrapsGrop 1.3.6.1.4.1.2011.5.25.19.3.2.9
Patch operation error.
Status: current Access: read-only
NOTIFICATION-GROUP    

hwPatchInfoGroup 1.3.6.1.4.1.2011.5.25.19.3.2.10
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwPatchFileGroup 1.3.6.1.4.1.2011.5.25.19.3.2.11
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSysPafFileGroup 1.3.6.1.4.1.2011.5.25.19.3.2.13
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSysPafLicenseGroup 1.3.6.1.4.1.2011.5.25.19.3.2.14
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSysRebootAndSwitchGrop 1.3.6.1.4.1.2011.5.25.19.3.2.15
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwBootRomGroup 1.3.6.1.4.1.2011.5.25.19.3.2.16
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSystemCfcardNotificationGroup 1.3.6.1.4.1.2011.5.25.19.3.2.17
A collection of notification about system cfcard.
Status: current Access: read-only
NOTIFICATION-GROUP    

hwSysUpgradeGroup 1.3.6.1.4.1.2011.5.25.19.3.2.18
A collection of system upgrade.
Status: current Access: read-only
OBJECT-GROUP    

hwSysRebootInfoGroup 1.3.6.1.4.1.2011.5.25.19.3.2.19
A collection of system upgrade.
Status: current Access: read-only
OBJECT-GROUP    

hwSysDeviceCheckGroup 1.3.6.1.4.1.2011.5.25.19.3.2.20
A collection of system device checks.
Status: current Access: read-only
OBJECT-GROUP    

huaweiSysVoiceFileGroup 1.3.6.1.4.1.2011.5.25.19.3.2.21
A collection of objects providing mandatory system configureation file information.
Status: current Access: read-only
OBJECT-GROUP    

hwSysWlanApUpgradeCmdGroup 1.3.6.1.4.1.2011.5.25.19.3.2.22
A collection of system wlan ap upgrade.
Status: current Access: read-only
OBJECT-GROUP    

hwSysWlanApUpgradeStatusGroup 1.3.6.1.4.1.2011.5.25.19.3.2.23
A collection of system wlan ap upgrade status.
Status: current Access: read-only
OBJECT-GROUP    

hwSysWlanApUpgradeNotificationsGroup 1.3.6.1.4.1.2011.5.25.19.3.2.24
A collection of system wlan ap upgrade notifications.
Status: current Access: read-only
NOTIFICATION-GROUP    

huaweiSysAndroidFileGroup 1.3.6.1.4.1.2011.5.25.19.3.2.25
A collection of objects providing mandatory system android file information.
Status: current Access: read-only
OBJECT-GROUP