HUAWEI-ETHARP-MIB

File: HUAWEI-ETHARP-MIB.mib (80815 bytes)

Imported modules

HUAWEI-MIB SNMPv2-SMI SNMPv2-TC
SNMPv2-CONF IF-MIB INET-ADDRESS-MIB
ENTITY-MIB P-BRIDGE-MIB

Imported symbols

hwDatacomm OBJECT-TYPE MODULE-IDENTITY
IpAddress Counter32 Integer32
Unsigned32 NOTIFICATION-TYPE PhysAddress
MacAddress DisplayString RowStatus
NOTIFICATION-GROUP OBJECT-GROUP MODULE-COMPLIANCE
InterfaceIndex InetAddressIPv4 PhysicalIndex
entPhysicalIndex entPhysicalName EnabledStatus

Defined Types

HwEthernetARPSpeedLimitEntry  
SEQUENCE    
  hwEthernetARPLimitSlot Integer32
  hwEthernetARPLimitType INTEGER
  hwEthernetARPLimitIPType INTEGER
  hwEthernetARPLimitSpeedValue Unsigned32

HwEthernetARPStaticsEntry  
SEQUENCE    
  hwEthernetARPStaticsSlot Integer32
  hwEthernetARPStaticsLearnTotal Counter32
  hwEthernetARPDropForLimit Counter32
  hwEthernetARPDropForARPSuppress Counter32
  hwEthernetARPDropForARPMissSuppress Counter32
  hwEthernetARPDropForOther Counter32
  hwEthernetARPMissDropForOther Counter32
  hwEthernetARPRcvNum Counter32
  hwEthernetARPMissRcvNum Counter32
  hwEthernetARPStaticsOperation INTEGER
  hwEthernetARPDropForARPProxySuppress Counter32

HwEthARPShowWithInterAndVidEntry  
SEQUENCE    
  hwEthARPShowIfindex InterfaceIndex
  hwEthARPShowVid Integer32
  hwEthARPIpAddr IpAddress
  hwEthARPMacAddr PhysAddress

HwEthARPLimitEntry  
SEQUENCE    
  hwEthARPLimitCfgIfindex InterfaceIndex
  hwEthARPVLANFirst Integer32
  hwEthARPVLANLast Integer32
  hwEthARPLimitNum Integer32
  hwEthARPLimitRowStatus RowStatus

HwEthernetARPLearningStrictInterfaceEntry  
SEQUENCE    
  hwEthernetARPLearningStrictIfindex InterfaceIndex
  hwEthernetARPLearningStrictState INTEGER
  hwEthernetARPLearningStrictRowStatus RowStatus

HwArpLinkInterfaceEntry  
SEQUENCE    
  hwArpLinkIfIndex Integer32
  hwArpLinkPeerIp InetAddressIPv4
  hwArpLinkDetectTime Integer32
  hwArpLinkDetectTimes Integer32
  hwArpLinkDetectMode INTEGER
  hwArpLinkStatus INTEGER
  hwArpLinkRowStatus RowStatus

HwArpEntryExpireControlEntry  
SEQUENCE    
  hwArpEntryExpireIfIndex InterfaceIndex
  hwArpEntryExpireDetectMode INTEGER
  hwArpEntryExpireFakeTime Integer32

HwArpDynEntry  
SEQUENCE    
  hwArpDynIfIndex Integer32
  hwArpDynIpAdd InetAddressIPv4
  hwArpDynVrf OCTET STRING
  hwArpDynMacAdd PhysAddress
  hwArpDynVlanId Integer32
  hwArpDynCeVlanId Integer32
  hwArpDynOutIfIndex InterfaceIndex
  hwArpDynExpireTime Integer32

HwArpCfgEntry  
SEQUENCE    
  hwArpCfgIpAdd InetAddressIPv4
  hwArpCfgMacAdd MacAddress
  hwArpCfgVrf OCTET STRING
  hwArpCfgVlanId Integer32
  hwArpCfgCeVlanId Integer32
  hwArpCfgOutIfIndex Integer32
  hwArpCfgRowstatus RowStatus

HwArpEntryGatewayConflictEntry  
SEQUENCE    
  hwEthernetARPAntiGatewayConflictIndex Integer32
  hwEthernetARPAntiGatewayConflictIpAddress IpAddress
  hwEthernetARPAntiGatewayConflictMacAddress OCTET STRING
  hwEthernetARPAntiGatewayConflictVlanId Integer32
  hwEthernetARPAntiGatewayConflictIfName OCTET STRING

HwArpSecValidateEntry  
SEQUENCE    
  hwArpSecValidateIfIndex InterfaceIndex
  hwArpSecValidateSmac EnabledStatus
  hwArpSecValidateDmac EnabledStatus
  hwArpSecValidateRowStatus RowStatus

HwARPGratuitousSendEntry  
SEQUENCE    
  hwARPGratuitousSendIfIndex InterfaceIndex
  hwARPGratuitousSendEnable EnabledStatus
  hwARPArpGratuitousSendInterval Integer32

HwEthernetARPLearnStopEntry  
SEQUENCE    
  hwEthernetARPLearnStopSlot Integer32 0..128
  hwEthernetARPLearnStopThreshold Counter32

HwArpStatisticsEntry  
SEQUENCE    
  hwArpStatisticsSlot Integer32
  hwArpStatisticsType INTEGER
  hwArpStatisticsLearnedCount Counter32
  hwArpStatisticsAvailableCount Counter32

Defined Values

hwEthernetARPMIB 1.3.6.1.4.1.2011.5.25.123
This MIB describes objects used for managing Ethernet ARP, including ARP Speed-limit,ARP Limit etc.
MODULE-IDENTITY    

hwEthernetARPObjects 1.3.6.1.4.1.2011.5.25.123.1
OBJECT IDENTIFIER    

hwEthernetARPAntiAttackLog 1.3.6.1.4.1.2011.5.25.123.1.1
To prevent log and trap from being attacked, the function is not enabled by default.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1200  

hwEthernetARPLearningStrict 1.3.6.1.4.1.2011.5.25.123.1.2
Indicates the ARP strict learning. In this way, routers can learn ARP entries only from the arp reply in response to the arp requrest send by the router.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwEthernetARPSpeedLimitTable 1.3.6.1.4.1.2011.5.25.123.1.3
The table contains the configuration information of Ethernet ARP Speed limit slot. The information includes type, speedvalue, sourceip and destip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwEthernetARPSpeedLimitEntry

hwEthernetARPSpeedLimitEntry 1.3.6.1.4.1.2011.5.25.123.1.3.1
The table contains the configuration information of Ethernet ARP Speed limit slot. The information includes type, speedvalue, sourceip and destip.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwEthernetARPSpeedLimitEntry  

hwEthernetARPLimitSlot 1.3.6.1.4.1.2011.5.25.123.1.3.1.1
The slot of ARP Speed Limit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..128  

hwEthernetARPLimitType 1.3.6.1.4.1.2011.5.25.123.1.3.1.2
The Type of ARP Speed Limit.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER arp(1), arpmiss(2)  

hwEthernetARPLimitIPType 1.3.6.1.4.1.2011.5.25.123.1.3.1.3
ARP speed limit is performed on a source or a destination IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER sourceip(4), destinationip(8)  

hwEthernetARPLimitSpeedValue 1.3.6.1.4.1.2011.5.25.123.1.3.1.4
The Speed Value of ARP Speed Limit.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65536  

hwEthernetARPSpeedLimitIfIndex 1.3.6.1.4.1.2011.5.25.123.1.4
Indicates an interface enabled with ARP-MISS or an interface receiving the ARP packets.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndex  

hwEthernetARPSpeedLimitConfigured 1.3.6.1.4.1.2011.5.25.123.1.5
The Configured Speed Limit Value of ARP Speed Limit.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Counter32  

hwEthernetARPSpeedLimitCurrent 1.3.6.1.4.1.2011.5.25.123.1.6
The Current Speed Limit Value of ARP Speed Limit.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Counter32  

hwEthernetARPSpeedLimitType 1.3.6.1.4.1.2011.5.25.123.1.7
The Type of ARP Speed Limit.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

hwEthernetARPSpeedLimitSrcIPAddr 1.3.6.1.4.1.2011.5.25.123.1.8
The Source IP address of ARP Speed Limit.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hwEthernetARPSpeedLimitDstIPAddr 1.3.6.1.4.1.2011.5.25.123.1.9
The Destination IP address of ARP Speed Limit.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hwEthernetARPSpeedLimitVPNinstance 1.3.6.1.4.1.2011.5.25.123.1.10
The VPN-instance name of ARP Speed Limit.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

hwEthernetARPStaticsTable 1.3.6.1.4.1.2011.5.25.123.1.11
A table contains the statistics about Ethernet ARP. The statistics include number of received ARP packets, number of received ARP-MISS packets, number of learned ARP packets, number of discarded ARP packets caused by the ARP limit, the number of discarded ARP-MISS packets caused by the limit and the number of discarded ARP and ARP-MISS packets caused by other reasons.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwEthernetARPStaticsEntry

hwEthernetARPStaticsEntry 1.3.6.1.4.1.2011.5.25.123.1.11.1
A table contains the statistics about Ethernet ARP. The statistics include number of received ARP packets, number of received ARP-MISS packets, number of learned ARP packets, number of discarded ARP packets caused by the ARP limit, the number of discarded ARP-MISS packets caused by the limit and the number of discarded ARP and ARP-MISS packets caused by other reasons.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwEthernetARPStaticsEntry  

hwEthernetARPStaticsSlot 1.3.6.1.4.1.2011.5.25.123.1.11.1.1
The slot about which the ARP statistics are displayed.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..128 | 65535  

hwEthernetARPStaticsLearnTotal 1.3.6.1.4.1.2011.5.25.123.1.11.1.2
The total number of the learned ARP packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPDropForLimit 1.3.6.1.4.1.2011.5.25.123.1.11.1.3
The number of discarded packets caused by limit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPDropForARPSuppress 1.3.6.1.4.1.2011.5.25.123.1.11.1.4
The number of discarded packets caused by the ARP suppress.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPDropForARPMissSuppress 1.3.6.1.4.1.2011.5.25.123.1.11.1.5
The number of discarded packets caused by the ARP-MISS suppress.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPDropForOther 1.3.6.1.4.1.2011.5.25.123.1.11.1.6
The number of discarded ARP packets caused by other reasons.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPMissDropForOther 1.3.6.1.4.1.2011.5.25.123.1.11.1.7
The number of discarded ARP-MISS caused by other reasons.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPRcvNum 1.3.6.1.4.1.2011.5.25.123.1.11.1.8
The number of received ARP packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPMissRcvNum 1.3.6.1.4.1.2011.5.25.123.1.11.1.9
The number of received ARP-MISS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPStaticsOperation 1.3.6.1.4.1.2011.5.25.123.1.11.1.10
resets the statistics about Ethernet ARP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), unused(2)  

hwEthernetARPDropForARPProxySuppress 1.3.6.1.4.1.2011.5.25.123.1.11.1.11
The number of discarded packets caused by the ARP-PROXY suppress.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthARPShowWithInterAndVidTable 1.3.6.1.4.1.2011.5.25.123.1.12
Display the ARP table based on interface number or interface number and VLAN ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwEthARPShowWithInterAndVidEntry

hwEthARPShowWithInterAndVidEntry 1.3.6.1.4.1.2011.5.25.123.1.12.1
Display the ARP table based on interface number or interface number and VLAN ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwEthARPShowWithInterAndVidEntry  

hwEthARPShowIfindex 1.3.6.1.4.1.2011.5.25.123.1.12.1.1
The interface learns ARP packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwEthARPShowVid 1.3.6.1.4.1.2011.5.25.123.1.12.1.2
The VLAN receives the APR packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

hwEthARPIpAddr 1.3.6.1.4.1.2011.5.25.123.1.12.1.3
The ip of ARP .
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwEthARPMacAddr 1.3.6.1.4.1.2011.5.25.123.1.12.1.4
The MAC of ARP .
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

hwEthARPLimitTable 1.3.6.1.4.1.2011.5.25.123.1.13
Configure the ARP limit based on interfaces or VLANs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwEthARPLimitEntry

hwEthARPLimitEntry 1.3.6.1.4.1.2011.5.25.123.1.13.1
Configure the ARP limit based on interfaces or VLANs.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwEthARPLimitEntry  

hwEthARPLimitCfgIfindex 1.3.6.1.4.1.2011.5.25.123.1.13.1.1
The interface on which the limit is configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwEthARPVLANFirst 1.3.6.1.4.1.2011.5.25.123.1.13.1.2
The VLAN to which Layer 2 interfaces belong.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

hwEthARPVLANLast 1.3.6.1.4.1.2011.5.25.123.1.13.1.3
The VLAN to which Layer 2 interfaces belong.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

hwEthARPLimitNum 1.3.6.1.4.1.2011.5.25.123.1.13.1.4
The value of the ARP limit.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..2147483647  

hwEthARPLimitRowStatus 1.3.6.1.4.1.2011.5.25.123.1.13.1.5
The running status of the ARP limit table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwEthernetARPLearningStrictInterfaceTable 1.3.6.1.4.1.2011.5.25.123.1.14
Configure the ARP Learning Strict based on interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwEthernetARPLearningStrictInterfaceEntry

hwEthernetARPLearningStrictInterfaceEntry 1.3.6.1.4.1.2011.5.25.123.1.14.1
Configure the ARP Learning Strict based on interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwEthernetARPLearningStrictInterfaceEntry  

hwEthernetARPLearningStrictIfindex 1.3.6.1.4.1.2011.5.25.123.1.14.1.1
The interface on which the ARP Learning Strict be configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwEthernetARPLearningStrictState 1.3.6.1.4.1.2011.5.25.123.1.14.1.2
The ARP Learning Strict State be configured.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER forceEnable(1), forceDisable(2)  

hwEthernetARPLearningStrictRowStatus 1.3.6.1.4.1.2011.5.25.123.1.14.1.3
The running status of the ARP Learning Strict table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwArpLinkInterfaceTable 1.3.6.1.4.1.2011.5.25.123.1.15
Config ARP link interface: hwArpLinkIfIndex: interface index hwArpLinkPeerIp: peer ip hwArpLinkDetectTime: detection time between two ARP packects hwArpLinkDetectTimes: detection times of ARP packects hwArpLinkDetectMode: detection mode hwArpLinkStatus: interface status hwArpLinkRowStatus: the row status of this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwArpLinkInterfaceEntry

hwArpLinkInterfaceEntry 1.3.6.1.4.1.2011.5.25.123.1.15.1
Config ARP link interface: hwArpLinkIfIndex: interface index hwArpLinkPeerIp: peer ip hwArpLinkDetectTime: detection time between two ARP packects hwArpLinkDetectTimes: detection times of ARP packects hwArpLinkDetectMode: detection mode hwArpLinkStatus: interface status hwArpLinkRowStatus: the row status of this row.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwArpLinkInterfaceEntry  

hwArpLinkIfIndex 1.3.6.1.4.1.2011.5.25.123.1.15.1.1
The index of interface which is configed to be linked by ARP, the zero value is invalid.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwArpLinkPeerIp 1.3.6.1.4.1.2011.5.25.123.1.15.1.11
The IP address which ARP detecting packet will send to. When creating a new record or modifying the peer ip address, a check for this ip will be generated. If it is invalid, that operation will be not applicable.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv4  

hwArpLinkDetectTime 1.3.6.1.4.1.2011.5.25.123.1.15.1.12
The interval time for two ARP packets are sent to detect the peer's interface status, this time unit is millisecond. The valid range is from 200 to 10000, and the default value is 1000.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 200..10000  

hwArpLinkDetectTimes 1.3.6.1.4.1.2011.5.25.123.1.15.1.13
After the max detecting times for ARP packet is sent to, and there is not any response, the sender can judge the peer interface is down. Then, setting the status of current interface down. The valid range is from 1 to 10, and the default value is 3.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..10  

hwArpLinkDetectMode 1.3.6.1.4.1.2011.5.25.123.1.15.1.14
The detecting mode for ARP linking interface. If the mode is loose and its status is down, current interface just wait to receive the ARP packet, when received peer's arp packet, current interface status is up. If mode is strict, current interface sends ARP detecting packet to peer actively, and shutdown itself, if these is no response from peer after the retry times. If status of current interface is up, it will send ARP packet to detect the status of peer actively, whenever the mode is loose or strict.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER loose(1), strict(2)  

hwArpLinkStatus 1.3.6.1.4.1.2011.5.25.123.1.15.1.15
The status of interface linked by ARP. This value can not be set anytime.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

hwArpLinkRowStatus 1.3.6.1.4.1.2011.5.25.123.1.15.1.51
The row status of ARP link table. The detail can be found from the rowstatus definition.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwArpEntryExpireControlTable 1.3.6.1.4.1.2011.5.25.123.1.16
The value of the object identifies the parameters of ARP aging detection, such as ARP detection mode, start time, detection times. At present, only the ARP detection mode and ARP fake-entry expire time can be configured. hwArpEntryExpireIfIndex: indicates the interface index. hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode. hwArpEntryExpireFakeTime: indicates the expire time of ARP fake entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwArpEntryExpireControlEntry

hwArpEntryExpireControlEntry 1.3.6.1.4.1.2011.5.25.123.1.16.1
The value of the object identifies the parameters of ARP aging detection, such as ARP detection mode, start time, detection times. At present, only the ARP detection mode and ARP fake-entry expire time can be configured. hwArpEntryExpireIfIndex: indicates the interface index. hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode. hwArpEntryExpireFakeTime: indicates the expire time of ARP fake entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwArpEntryExpireControlEntry  

hwArpEntryExpireIfIndex 1.3.6.1.4.1.2011.5.25.123.1.16.1.1
This object indicates the index of an interface on which ARP aging detection parameters are set. The value 0 is invalid.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwArpEntryExpireDetectMode 1.3.6.1.4.1.2011.5.25.123.1.16.1.2
This object indicates the ARP aging detection mode. In unicast ARP detection mode, unicast ARP detection packets are sent before ARP ages. In broadcast ARP detection mode, broadcast ARP detection packets are sent before ARP ages. By default, the system adopts the broadcast ARP detection mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER broadcast(1), unicast(2)  

hwArpEntryExpireFakeTime 1.3.6.1.4.1.2011.5.25.123.1.16.1.3
This object indicates the expire time of ARP fake entry. The valid range is from 1 to 36000, and the default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..36000  

hwArpDynTable 1.3.6.1.4.1.2011.5.25.123.1.17
The value of the object identifies the items of ARP table, such as IP address of ARP items, VPN instance name of ARP items, MAC address of ARP items, VLAN information of ARP items, expire time of ARP items. hwArpDynEntryIfIndex: indicates the interface index. hwArpDynEntryIpAdd: indicates the IP address. hwArpDynEntryVrf: indicates the VPN instance name. hwArpDynEntryMacAdd: indicates the MAC address. hwArpDynEntryVlanId: indicates the VLAN of ARP item. hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item. hwArpDynEntryOutIfIndex: indicates the forwarding interface. hwArpDynEntryExpireTime: indicates the expire time of ARP item.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwArpDynEntry

hwArpDynEntry 1.3.6.1.4.1.2011.5.25.123.1.17.1
The value of the object identifies the items of dynamic ARP table, such as IP address of ARP items, VPN instance name of ARP items, MAC address of ARP items, VLAN information of ARP items, expire time of ARP items. hwArpDynEntryIfIndex: indicates the interface index. hwArpDynEntryIpAdd: indicates the IP address. hwArpDynEntryVrf: indicates the VPN instance name. hwArpDynEntryMacAdd: indicates the MAC address. hwArpDynEntryVlanId: indicates the VLAN of ARP item. hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item. hwArpDynEntryOutIfIndex: indicates the forwarding interface. hwArpDynEntryExpireTime: indicates the expire time of ARP item.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwArpDynEntry  

hwArpDynIfIndex 1.3.6.1.4.1.2011.5.25.123.1.17.1.1
The logic forwarding interface. The value 0 is invalid.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwArpDynIpAdd 1.3.6.1.4.1.2011.5.25.123.1.17.1.2
This object indicates the IP address of an ARP items. The value 0 is invalid.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressIPv4  

hwArpDynVrf 1.3.6.1.4.1.2011.5.25.123.1.17.1.3
This object indicates the VPN name of an ARP items.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwArpDynMacAdd 1.3.6.1.4.1.2011.5.25.123.1.17.1.11
This object indicates the MAC address of an ARP items.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

hwArpDynVlanId 1.3.6.1.4.1.2011.5.25.123.1.17.1.12
This object indicates the VLAN of an ARP items.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4096  

hwArpDynCeVlanId 1.3.6.1.4.1.2011.5.25.123.1.17.1.13
This object indicates the CE VLAN of an ARP items.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4096  

hwArpDynOutIfIndex 1.3.6.1.4.1.2011.5.25.123.1.17.1.14
The physical forwarding interface.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

hwArpDynExpireTime 1.3.6.1.4.1.2011.5.25.123.1.17.1.15
This object indicates the expire time of an ARP items.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwArpCfgTable 1.3.6.1.4.1.2011.5.25.123.1.18
The value of the object identifies the items of static ARP table, such as IP address of ARP items, VPN instance name of ARP items, MAC address of ARP items, VLAN information of ARP items. hwArpDynEntryIpAdd: indicates the IP address. hwArpDynEntryVrf: indicates the VPN instance name. hwArpDynEntryMacAdd: indicates the MAC address. hwArpDynEntryVlanId: indicates the VLAN of ARP item. hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item. hwArpDynEntryOutIfIndex: indicates the forwarding interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwArpCfgEntry

hwArpCfgEntry 1.3.6.1.4.1.2011.5.25.123.1.18.1
The value of the object identifies the items of static ARP table, such as IP address of ARP items, VPN instance name of ARP items, MAC address of ARP items, VLAN information of ARP items. hwArpDynEntryIpAdd: indicates the IP address. hwArpDynEntryVrf: indicates the VPN instance name. hwArpDynEntryMacAdd: indicates the MAC address. hwArpDynEntryVlanId: indicates the VLAN of ARP item. hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item. hwArpDynEntryOutIfIndex: indicates the forwarding interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwArpCfgEntry  

hwArpCfgIpAdd 1.3.6.1.4.1.2011.5.25.123.1.18.1.1
This object indicates the IP address of an ARP items. The value 0 is invalid.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressIPv4  

hwArpCfgMacAdd 1.3.6.1.4.1.2011.5.25.123.1.18.1.2
This object indicates the MAC address of an ARP items.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hwArpCfgVrf 1.3.6.1.4.1.2011.5.25.123.1.18.1.3
This object indicates the VPN name of an ARP items.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwArpCfgVlanId 1.3.6.1.4.1.2011.5.25.123.1.18.1.11
This object indicates the VLAN of an ARP items.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4096  

hwArpCfgCeVlanId 1.3.6.1.4.1.2011.5.25.123.1.18.1.12
This object indicates the CE VLAN of an ARP items.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4096  

hwArpCfgOutIfIndex 1.3.6.1.4.1.2011.5.25.123.1.18.1.13
The physical forwarding interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hwArpCfgRowstatus 1.3.6.1.4.1.2011.5.25.123.1.18.1.51
This object indicates the row status of an static ARP item.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwEthernetARPAntiAttackStatus 1.3.6.1.4.1.2011.5.25.123.1.19
This object indicates the status of the ARP anti-attack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), fixMac(1), fixAll(2), sendAck(3)  

hwEthernetARPAntiGateWayConflict 1.3.6.1.4.1.2011.5.25.123.1.20
This object indicates the status of the ARP anti-gateway-conflict.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwEthernetARPLogAndTrapTimer 1.3.6.1.4.1.2011.5.25.123.1.21
This object indicates the interval of log and trap. The default value is 0, which means no log and trap.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1200  

hwEthernetARPAntiAttackObjects 1.3.6.1.4.1.2011.5.25.123.1.22
OBJECT IDENTIFIER    

hwEthernetARPAntiAttackIpAddress 1.3.6.1.4.1.2011.5.25.123.1.22.1
This object indicates the IP address which is attacked.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hwEthernetARPAntiAttackMacAddress 1.3.6.1.4.1.2011.5.25.123.1.22.2
This object indicates the MAC address which is attacked.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPAntiAttackVlanId 1.3.6.1.4.1.2011.5.25.123.1.22.3
This object indicates the VLAN ID which is attacked.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..4094  

hwEthernetARPAntiAttackIfName 1.3.6.1.4.1.2011.5.25.123.1.22.4
This object indicates the interface name which is attacked.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwArpEntryGatewayConflictTable 1.3.6.1.4.1.2011.5.25.123.1.23
The value of the object identifies the information about the source of the attack. It contains IP address, MAC, VLAN ID and interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwArpEntryGatewayConflictEntry

hwArpEntryGatewayConflictEntry 1.3.6.1.4.1.2011.5.25.123.1.23.1
The value of the object identifies the information about the source of the attack. It contains IP address, MAC, VLAN ID and interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwArpEntryGatewayConflictEntry  

hwEthernetARPAntiGatewayConflictIndex 1.3.6.1.4.1.2011.5.25.123.1.23.1.1
The index of the gateway conflict entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..100  

hwEthernetARPAntiGatewayConflictIpAddress 1.3.6.1.4.1.2011.5.25.123.1.23.1.2
This object indicates the IP address is attacked.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwEthernetARPAntiGatewayConflictMacAddress 1.3.6.1.4.1.2011.5.25.123.1.23.1.3
This object indicates the MAC of the attack-source.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPAntiGatewayConflictVlanId 1.3.6.1.4.1.2011.5.25.123.1.23.1.4
This object indicates the VLAN ID of the attack-source.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

hwEthernetARPAntiGatewayConflictIfName 1.3.6.1.4.1.2011.5.25.123.1.23.1.5
This object indicates the interface of the attack-source.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwArpSecValidateTable 1.3.6.1.4.1.2011.5.25.123.1.24
The table contains the arp validation information on the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwArpSecValidateEntry

hwArpSecValidateEntry 1.3.6.1.4.1.2011.5.25.123.1.24.1
The entry contains the arp validation information on the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwArpSecValidateEntry  

hwArpSecValidateIfIndex 1.3.6.1.4.1.2011.5.25.123.1.24.1.1
The index of the arp validation entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwArpSecValidateSmac 1.3.6.1.4.1.2011.5.25.123.1.24.1.2
indicates check the source-mac of arp packet head and the ethernet packet head.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwArpSecValidateDmac 1.3.6.1.4.1.2011.5.25.123.1.24.1.3
indicates check the destination-mac of arp packet head and the ethernet packet head.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwArpSecValidateRowStatus 1.3.6.1.4.1.2011.5.25.123.1.24.1.51
This object specifies the status of the arp validation table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwARPGratuitousSendTable 1.3.6.1.4.1.2011.5.25.123.1.25
The table contains the arp validation information on the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwARPGratuitousSendEntry

hwARPGratuitousSendEntry 1.3.6.1.4.1.2011.5.25.123.1.25.1
The entry contains the gratuitous arp send information on the vlanif interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwARPGratuitousSendEntry  

hwARPGratuitousSendIfIndex 1.3.6.1.4.1.2011.5.25.123.1.25.1.1
The ifindex of the ARP gratuitous send configed.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwARPGratuitousSendEnable 1.3.6.1.4.1.2011.5.25.123.1.25.1.2
This object indicates the status of the gratuitous-arp send.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

hwARPArpGratuitousSendInterval 1.3.6.1.4.1.2011.5.25.123.1.25.1.3
This object indicates the interval of the gratuitous-arp send. The value ranges from 1 to 86400, in second, with default value 90.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..86400  

hwEthernetARPThresholdObjects 1.3.6.1.4.1.2011.5.25.123.1.26
OBJECT IDENTIFIER    

hwEthernetARPThresholdValue 1.3.6.1.4.1.2011.5.25.123.1.26.1
This object indicates the threshold of the alarm generated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Counter32  

hwEthernetARPThresholdDynamicNumber 1.3.6.1.4.1.2011.5.25.123.1.26.2
This object indicates the number of dynamic ARP entries.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Counter32  

hwEthernetARPThresholdStaticNumber 1.3.6.1.4.1.2011.5.25.123.1.26.3
This object indicates the number of static ARP entries.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Counter32  

hwEthernetARPConflictDetect 1.3.6.1.4.1.2011.5.25.123.1.27
Indicates the ARP conflict detect. In this way, router can detect ARP entries conflict.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwETHARPIPConflictObjects 1.3.6.1.4.1.2011.5.25.123.1.28
OBJECT IDENTIFIER    

hwEthernetARPIPConflictIPAddress 1.3.6.1.4.1.2011.5.25.123.1.28.1
This object indicates the conflict IP address.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hwEthernetARPIPConflictLocalInterfaceName 1.3.6.1.4.1.2011.5.25.123.1.28.2
This object indicates the interface before conflict.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPIPConflictLocalMAC 1.3.6.1.4.1.2011.5.25.123.1.28.3
This object indicates the MAC before conflict.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPIPConflictLocalVLAN 1.3.6.1.4.1.2011.5.25.123.1.28.4
This object indicates the VLAN before conflict.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..4094  

hwEthernetARPIPConflictLocalCEVLAN 1.3.6.1.4.1.2011.5.25.123.1.28.5
This object indicates the CE VLAN before conflict.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..4094  

hwEthernetARPIPConflictReceiveInterfaceName 1.3.6.1.4.1.2011.5.25.123.1.28.6
This object indicates the conflict interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPIPConflictReceiveMAC 1.3.6.1.4.1.2011.5.25.123.1.28.7
This object indicates the conflict MAC of the received packet.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPIPConflictReceiveVLAN 1.3.6.1.4.1.2011.5.25.123.1.28.8
This object indicates the VLAN of the received packet.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..4094  

hwEthernetARPIPConflictReceiveCEVLAN 1.3.6.1.4.1.2011.5.25.123.1.28.9
This object indicates the CE VLAN of the received packet.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..4094  

hwEthernetARPIPConflictType 1.3.6.1.4.1.2011.5.25.123.1.28.10
This object indicates the conflict type.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPReceiveDstIPAddr 1.3.6.1.4.1.2011.5.25.123.1.28.11
This object indicates the destination IP address of the received packet.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hwEthernetARPReceiveDstMAC 1.3.6.1.4.1.2011.5.25.123.1.28.12
This object indicates the destination MAC of the received packet.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPLearnStopTable 1.3.6.1.4.1.2011.5.25.123.1.29
The value of the object identifies the parameters of ARP learning disable threshold. hwEthernetARPLearnStopSlot: indicates the slot. hwEthernetARPLearnStopThreshold: indicates the threshold usage of memory for learning ARP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwEthernetARPLearnStopEntry

hwEthernetARPLearnStopEntry 1.3.6.1.4.1.2011.5.25.123.1.29.1
The value of the object identifies the parameters of of ARP learning disable threshold. hwEthernetARPLearnStopSlot: indicates the slot of the alarm generated. hwEthernetARPLearnStopThreshold: indicates the threshold usage of memory for learning ARP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwEthernetARPLearnStopEntry  

hwEthernetARPLearnStopSlot 1.3.6.1.4.1.2011.5.25.123.1.29.1.1
This object indicates the the slot of the alarm generated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..128  

hwEthernetARPLearnStopThreshold 1.3.6.1.4.1.2011.5.25.123.1.29.1.2
This object indicates the threshold usage of memory for learning ARP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwArpStatisticsTable 1.3.6.1.4.1.2011.5.25.123.1.30
The table contains the arp information of the interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwArpStatisticsEntry

hwArpStatisticsEntry 1.3.6.1.4.1.2011.5.25.123.1.30.1
The entry contains the arp information of the interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwArpStatisticsEntry  

hwArpStatisticsSlot 1.3.6.1.4.1.2011.5.25.123.1.30.1.1
The slot of ARP Statics Verbose.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..128  

hwArpStatisticsType 1.3.6.1.4.1.2011.5.25.123.1.30.1.2
The Type of Interface Learn ARP.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER phy(1), ve(2), ethTrunk(3), vlanif(4), phyQinq(5), ethTrunkQinq(6), veQinq(7)  

hwArpStatisticsLearnedCount 1.3.6.1.4.1.2011.5.25.123.1.30.1.3
Number of ARP entries learned by this type of interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwArpStatisticsAvailableCount 1.3.6.1.4.1.2011.5.25.123.1.30.1.4
The avaiable number of ARP entries of this type of interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwEthernetARPRemoteBackupFailObjects 1.3.6.1.4.1.2011.5.25.123.1.31
OBJECT IDENTIFIER    

hwEthernetARPRemoteBackupFailMainIfName 1.3.6.1.4.1.2011.5.25.123.1.31.1
This object indicates that the interface name with the remote ARP entry backup failure.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEthernetARPNotifications 1.3.6.1.4.1.2011.5.25.123.2
OBJECT IDENTIFIER    

hwEthernetARPSpeedLimitAlarm 1.3.6.1.4.1.2011.5.25.123.2.1
Trap information about ARP speed limit: interface index, current configured limit number, current received number, limit type (ARP, ARP-MISS), source IP address, destination IP address, VPN instance.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPAntiAttackAlarm 1.3.6.1.4.1.2011.5.25.123.2.2
Trap information about ARP anti-attack: IP address, MAC, VLAN id, interface index.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPAntiGatewayConflictAlarm 1.3.6.1.4.1.2011.5.25.123.2.3
Trap information about ARP anti-attack: IP address, MAC, VLAN ID, interface index.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPThresholdExceedAlarm 1.3.6.1.4.1.2011.5.25.123.2.4
Trap information about ARP exceed threshold: slot, threshold, number of dynamic ARP, number of static ARP.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPThresholdResumeAlarm 1.3.6.1.4.1.2011.5.25.123.2.5
Trap information about ARP resume threshold: slot, threshold, number of dynamic ARP, number of static ARP.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPIPConflictEvent 1.3.6.1.4.1.2011.5.25.123.2.6
Trap information about ARP IP conflict.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPMACIPConflict 1.3.6.1.4.1.2011.5.25.123.2.7
Trap information about MAC and IP address conflict: conflict interface name, conflict MAC address, conflict IP address, and the received packet's destination MAC address, destination IP address, vlan, ce-vlan, receive interface.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPMACIPConflictResolved 1.3.6.1.4.1.2011.5.25.123.2.8
Trap information about MAC and IP address conflict resolved: conflict interface name, conflict MAC address, conflict IP address.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPLearnStopAlarm 1.3.6.1.4.1.2011.5.25.123.2.9
Trap information about ARP learning disable: memory usage threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPLearnResumeAlarm 1.3.6.1.4.1.2011.5.25.123.2.10
Trap information about ARP learning enable: memory usage threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPRemoteBackupFailAlarm 1.3.6.1.4.1.2011.5.25.123.2.11
Trap information about the remote ARP entry backup failure.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPRemoteBackupFailResumeAlarm 1.3.6.1.4.1.2011.5.25.123.2.12
Trap clearing information when the backup device detects that ARP entries are successfully backed up within a period.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwEthernetARPConformance 1.3.6.1.4.1.2011.5.25.123.3
OBJECT IDENTIFIER    

hwEthernetARPGroups 1.3.6.1.4.1.2011.5.25.123.3.1
OBJECT IDENTIFIER    

hwEthernetARPCompliances 1.3.6.1.4.1.2011.5.25.123.3.2
OBJECT IDENTIFIER    

hwEthernetARPStaticsGroup 1.3.6.1.4.1.2011.5.25.123.3.1.1
A table contains the statistics about Ethernet ARP. The statistics include number of received ARP packets, number of received ARP-MISS packets, number of learned ARP packets, number of discarded ARP packets caused by the ARP limit, the number of discarded ARP-MISS packets caused by the limit and the number of discarded ARP and ARP-MISS packets caused by other reasons.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthernetARPSpeedLimitGroup 1.3.6.1.4.1.2011.5.25.123.3.1.2
A Group table ,which contains the configuration information of Ethernet ARP Speed limit slot. The information includes type, speedvalue, sourceip and destip.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthARPShowWithInterAndVidGroup 1.3.6.1.4.1.2011.5.25.123.3.1.3
Display the ARP table based on interface number or interface number and VLAN ID.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthARPLimitGroup 1.3.6.1.4.1.2011.5.25.123.3.1.4
config the arp limit on the interface with vlanid,limit num.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthernetARPBaseGroup 1.3.6.1.4.1.2011.5.25.123.3.1.5
A collection of objects providing configuration or display.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthernetARPNotificationsGroup 1.3.6.1.4.1.2011.5.25.123.3.1.6
notification Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

hwEthernetARPLearningStrictInterfaceGroup 1.3.6.1.4.1.2011.5.25.123.3.1.7
ARP Learning Strict Interface Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwArpLinkInferaceGroup 1.3.6.1.4.1.2011.5.25.123.3.1.8
A collection of objects providing configuration of ARP linking interface.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwArpEntryExpireControlGroup 1.3.6.1.4.1.2011.5.25.123.3.1.9
A collection of objects providing configuration of ARP Expire Parameter.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwArpAntiAttackGroup 1.3.6.1.4.1.2011.5.25.123.3.1.10
A collection of objects providing lockuping ARP anti attack.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthernetARPThresholdGroup 1.3.6.1.4.1.2011.5.25.123.3.1.11
A collection of objects for ARP threshold alarm.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwETHARPIPConflictGroup 1.3.6.1.4.1.2011.5.25.123.3.1.12
A collection of objects for ARP conflict trap.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthernetARPLearnStopGroup 1.3.6.1.4.1.2011.5.25.123.3.1.13
A collection of objects for ARP learning alarm.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwArpStatisticsGroup 1.3.6.1.4.1.2011.5.25.123.3.1.14
A collection of objects for ARP statistics table.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthernetARPRemoteBackupFaidGroup 1.3.6.1.4.1.2011.5.25.123.3.1.15
A collection of objects for the remote ARP entry backup failure alarm.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwEthernetARPCompliance 1.3.6.1.4.1.2011.5.25.123.3.2.1
The compliance statement for arp Speedlimit and arp limit.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE