HUAWEI-CDP-COMPLIANCE-MIB

File: HUAWEI-CDP-COMPLIANCE-MIB.mib (19210 bytes)

Imported modules

SNMPv2-TC SNMPv2-CONF SNMPv2-SMI
RMON2-MIB IF-MIB P-BRIDGE-MIB
HUAWEI-MIB

Imported symbols

TEXTUAL-CONVENTION TimeStamp TruthValue
OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP
MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 NOTIFICATION-TYPE OBJECT-IDENTITY
TimeFilter ZeroBasedCounter32 InterfaceIndex
EnabledStatus hwDatacomm

Defined Types

HwCdpCompliancePortConfigEntry  
SEQUENCE    
  hwCdpCompliancePortConfigIfIndex InterfaceIndex
  hwCdpCompliancePortConfigAdminStatus INTEGER
  hwCdpCompliancePortConfigHoldTime Integer32
  hwCdpCompliancePortConfigNotificationEnable TruthValue
  hwCdpCompliancePortStatsReset EnabledStatus

HwCdpComplianceStatsRxPortEntry  
SEQUENCE    
  hwCdpComplianceStatsRxPortIfIndex InterfaceIndex
  hwCdpComplianceStatsRxPortFramesTotal Counter32
  hwCdpComplianceStatsRxPortAgeoutsTotal Counter32

HwCdpComplianceRemoteEntry  
SEQUENCE    
  hwCdpComplianceRemLocalPortIfIndex InterfaceIndex
  hwCdpComplianceRemTimeMark TimeFilter
  hwCdpComplianceRemoteInfo OCTET STRING

Defined Values

hwCdpComplianceMIB 1.3.6.1.4.1.2011.5.25.198
This file is an file for CDP compliance. It provides such functions of globally enabling or disabling the CDP compliance function, enabling the global alarm, querying and clearing statistics on ports.
MODULE-IDENTITY    

hwCdpComplianceObjects 1.3.6.1.4.1.2011.5.25.198.1
OBJECT IDENTIFIER    

hwCdpComplianceNotifications 1.3.6.1.4.1.2011.5.25.198.2
OBJECT IDENTIFIER    

hwCdpComplianceConformance 1.3.6.1.4.1.2011.5.25.198.3
OBJECT IDENTIFIER    

hwCdpComplianceConfiguration 1.3.6.1.4.1.2011.5.25.198.1.1
OBJECT IDENTIFIER    

hwCdpComplianceStatistics 1.3.6.1.4.1.2011.5.25.198.1.2
OBJECT IDENTIFIER    

hwCdpComplianceRemoteSystemsData 1.3.6.1.4.1.2011.5.25.198.1.3
OBJECT IDENTIFIER    

hwCdpComplianceEnable 1.3.6.1.4.1.2011.5.25.198.1.1.1
The administratively desired status of the global CDP compliance function. If the associated hwCdpComplianceEnable object has a value of 'disable(2)', then the system will discard CDP packets. If the associated hwCdpComplianceEnable object has a value of 'enable(1)', then the system will counter and keep the latest CDP packets.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwCdpComplianceNotificationInterval 1.3.6.1.4.1.2011.5.25.198.1.1.2
The hwCdpComplianceNotificationInterval indicates the interval (in units of seconds) of sending CDP notifications. The default value for hwCdpComplianceNotificationInterval object is five seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

hwCdpCompliancePortConfigTable 1.3.6.1.4.1.2011.5.25.198.1.1.3
The table that controls CDP compliance function setting on individual ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwCdpCompliancePortConfigEntry

hwCdpCompliancePortConfigEntry 1.3.6.1.4.1.2011.5.25.198.1.1.3.1
CDP compliance configuration information for a particular port. This configuration parameter controls transmission and the reception of CDP frames on those ports whose rows are created in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwCdpCompliancePortConfigEntry  

hwCdpCompliancePortConfigIfIndex 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.1
The interface index of the configured bridge port, reference RFC2233.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwCdpCompliancePortConfigAdminStatus 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.2
The administratively desired status of the CDP compliance of the port. If the associated hwCdpCompliancePortConfigAdminStatus object has a value of 'disabled(1)', then port will discard CDP packets received on this port. If the associated hwCdpCompliancePortConfigAdminStatus object has a value of 'rxOnly(2)', then the port will receive and store the CDP packet, but it will not transmit CDP frames on this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), rxOnly(2)  

hwCdpCompliancePortConfigHoldTime 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.3
The seconds of holding the recieved CDP packets. The received CDP packets wiil be aged if no new CDP packets received after so many seconds. This value should equal to or greater than the TTL value in the received CDP packets.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..254  

hwCdpCompliancePortConfigNotificationEnable 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.4
The hwCdpCompliancePortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwCdpCompliancePortStatsReset 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.5
Clears the statistics of packets received on the current port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwCdpComplianceStatsRemTablesLastChangeTime 1.3.6.1.4.1.2011.5.25.198.1.2.1
The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the hwCdpComplianceRemoteSystemData objects associated with remote systems. An NMS can use this object to reduce polling of the hwCdpComplianceRemoteSystemData objects.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

hwCdpComplianceStatsRemTablesAgeouts 1.3.6.1.4.1.2011.5.25.198.1.2.2
The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in hwCdpComplianceRemoteSystemsData because the information timeliness interval has expired. This counter should be incremented only once when the complete set of information is completely invalidated (aged out) from all related tables. Partial aging, similar to deletion case, is not allowed, and thus, should not change the value of this counter.
Status: current Access: read-only
OBJECT-TYPE    
  ZeroBasedCounter32  

hwCdpComplianceStatsRxPortTable 1.3.6.1.4.1.2011.5.25.198.1.2.3
A table containing CDP reception statistics for individual ports. Entries are not required to exist in this table while the hwCdpCompliancePortConfigEntry object is equal to 'disabled(1)'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwCdpComplianceStatsRxPortEntry

hwCdpComplianceStatsRxPortEntry 1.3.6.1.4.1.2011.5.25.198.1.2.3.1
CDP frame reception statistics for a particular port. All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted until ageed out. All statistical counters associated with a particular port on the port become frozen whenever the adminStatus is disabled for the same port.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwCdpComplianceStatsRxPortEntry  

hwCdpComplianceStatsRxPortIfIndex 1.3.6.1.4.1.2011.5.25.198.1.2.3.1.1
The interface index of the bridge port receiving CDP packets, reference RFC2233.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwCdpComplianceStatsRxPortFramesTotal 1.3.6.1.4.1.2011.5.25.198.1.2.3.1.2
The number of valid CDP frames received on the indicated port, while this CDP compliance function is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwCdpComplianceStatsRxPortAgeoutsTotal 1.3.6.1.4.1.2011.5.25.198.1.2.3.1.3
The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in hwCdpComplianceRemoteSystemsData because the information timeliness interval has expired. This counter is similar to hwCdpComplianceStatsRemTablesAgeouts, exceptthat the counter is on a per port basis. This enables NMS to poll tables associated with the hwCdpComplianceRemoteSystemsData objects associated with remote systems on the indicated port only. This counter should be set to zero during agent initialization and its value should not be saved in non-volatile storage. When a port's admin status changes from 'disabled' to 'rxOnly', the counter associated with the same port should reset to 0. The agent should also flush all remote system information associated with the same port. This counter should be incremented only once when the complete set of information is invalidated (aged out) from all related tables on a particular port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwCdpComplianceRemoteTable 1.3.6.1.4.1.2011.5.25.198.1.3.1
This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one hwCdpComplianceRemoteEntry is present for each local port, or it may choose to maintain multiple hwCdpComplianceRemoteEntry for the same local port. The following procedure may be used to retrieve remote systems information updates from an CDP compliance agent: 1. NMS polls all tables associated with remote systems and keeps a local copy of the information retrieved. 2. CDP compliance agent updates remote systems MIB objects, and sends out notifications to a list of notification destinations. 3. NMS receives the notifications and compares the new values of objects listed in step 1. Periodically, NMS should poll the object hwCdpStatsRemTablesLastChangeTime to find out if anything has changed since the last poll. if something has changed, NMS will poll the objects listed in step 1 to figure out what kind of changes occurred in the tables. if value of hwCdpComplianceStatsRemTablesInserts has changed, then NMS will walk all tables by employing TimeFilter with the last-polled time value. This request will return new objects or objects whose values are updated since the last poll. if value of hwCdpComplianceStatsRemTablesAgeouts has changed, then NMS will walk the hwCdpComplianceStatsRxPortAgeoutsTotal and compare the new values with previously recorded ones. For ports whose hwCdpComplianceStatsRxPortAgeoutsTotal value is greater than the recorded value, NMS will have to retrieve objects associated with those ports from table(s) without employing a TimeFilter (which is performed by specifying 0 for the TimeFilter.) hwCdpComplianceStatsRemTablesDeletes and hwCdpComplianceStatsRemTablesDrops objects are provided for informational purposes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwCdpComplianceRemoteEntry

hwCdpComplianceRemoteEntry 1.3.6.1.4.1.2011.5.25.198.1.3.1.1
Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwCdpComplianceRemoteEntry  

hwCdpComplianceRemLocalPortIfIndex 1.3.6.1.4.1.2011.5.25.198.1.3.1.1.1
The interface index of the local bridge port receving CDP packets, reference RFC2233.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwCdpComplianceRemTimeMark 1.3.6.1.4.1.2011.5.25.198.1.3.1.1.2
A time filter for this entry. See the time filter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how time filter works.
Status: current Access: read-only
OBJECT-TYPE    
  TimeFilter  

hwCdpComplianceRemoteInfo 1.3.6.1.4.1.2011.5.25.198.1.3.1.1.3
The latest CDP packet recieved oon the port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1600)  

hwCdpComplianceNotificationPrefix 1.3.6.1.4.1.2011.5.25.198.2.1
OBJECT IDENTIFIER    

hwCdpComplianceRemTablesChange 1.3.6.1.4.1.2011.5.25.198.2.1.1
A hwCdpComplianceRemTablesChange notification is sent when the value of hwCdpComplianceStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote systems table maintenance polls. Note that transmission of hwCdpComplianceRemTablesChange notifications are throttled by the agent, as specified by the 'hwCdpComplianceNotificationInterval' object.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwCdpComplianceCompliances 1.3.6.1.4.1.2011.5.25.198.3.1
OBJECT IDENTIFIER    

hwCdpComplianceGroups 1.3.6.1.4.1.2011.5.25.198.3.2
OBJECT IDENTIFIER    

hwCdpComplianceCompliance 1.3.6.1.4.1.2011.5.25.198.3.1.1
The compliance statement for SNMP entities which implement the HUAWEI-CDP-COMPLIANCE-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

hwCdpComplianceConfigGroup 1.3.6.1.4.1.2011.5.25.198.3.2.1
The collection of objects which are used to configure the CDP compliance implementation behavior. This group is mandatory for agents which implement the Huawei CDP compliance.
Status: current Access: read-only
OBJECT-GROUP    

hwCdpComplianceStatsGroup 1.3.6.1.4.1.2011.5.25.198.3.2.2
The collection of objects which are used to represent LLDP statistics. This group is mandatory for agents which implement the LLDP and have the capability of receiving and transmitting LLDP frames.
Status: current Access: read-only
OBJECT-GROUP    

hwCdpComplianceRemSysGroup 1.3.6.1.4.1.2011.5.25.198.3.2.3
The CDP packet received on the port.
Status: current Access: read-only
OBJECT-GROUP    

hwCdpComplianceTrapGroup 1.3.6.1.4.1.2011.5.25.198.3.2.4
The collection of notifications used to indicate HUAWEI-CDP-COMPLIANCE-MIB data consistency and general status information. This group is mandatory for agents which implement the huawei CDP compliance and have the capability of receiving CDP frames.
Status: current Access: read-only
NOTIFICATION-GROUP