HPN-ICF-LswQos-MIB

File: HPN-ICF-LswQos-MIB.mib (123061 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC HPN-ICF-OID-MIB

Imported symbols

Integer32 MODULE-IDENTITY OBJECT-TYPE
Counter32 Counter64 IpAddress
TruthValue MacAddress RowStatus
TEXTUAL-CONVENTION hpnicflswCommon

Defined Types

HpnicfMirrorOrMonitorType  
Specify the mirror source or destination type. port(1): the mirror source or destination is port. board(2): the mirror source or destination is board.
TEXTUAL-CONVENTION    
  INTEGER port(1), board(2)  

HpnicfQueueEntry  
SEQUENCE    
  hpnicfQueueIfIndex INTEGER
  hpnicfQueueScheduleMode INTEGER
  hpnicfQueueWeight1 INTEGER
  hpnicfQueueWeight2 INTEGER
  hpnicfQueueWeight3 INTEGER
  hpnicfQueueWeight4 INTEGER
  hpnicfQueueMaxDelay INTEGER
  hpnicfQueueWeight5 INTEGER
  hpnicfQueueWeight6 INTEGER
  hpnicfQueueWeight7 INTEGER
  hpnicfQueueWeight8 INTEGER

HpnicfRateLimitEntry  
SEQUENCE    
  hpnicfRateLimitAclIndex INTEGER
  hpnicfRateLimitIfIndex INTEGER
  hpnicfRateLimitVlanID INTEGER
  hpnicfRateLimitDirection INTEGER
  hpnicfRateLimitUserAclNum INTEGER
  hpnicfRateLimitUserAclRule INTEGER
  hpnicfRateLimitIpAclNum INTEGER
  hpnicfRateLimitIpAclRule INTEGER
  hpnicfRateLimitLinkAclNum INTEGER
  hpnicfRateLimitLinkAclRule INTEGER
  hpnicfRateLimitTargetRateMbps INTEGER
  hpnicfRateLimitTargetRateKbps INTEGER
  hpnicfRateLimitPeakRate INTEGER
  hpnicfRateLimitCIR INTEGER
  hpnicfRateLimitCBS INTEGER
  hpnicfRateLimitEBS INTEGER
  hpnicfRateLimitPIR INTEGER
  hpnicfRateLimitConformLocalPre INTEGER
  hpnicfRateLimitConformActionType INTEGER
  hpnicfRateLimitExceedActionType INTEGER
  hpnicfRateLimitExceedDscp INTEGER
  hpnicfRateLimitRuntime TruthValue
  hpnicfRateLimitRowStatus RowStatus
  hpnicfRateLimitExceedCos INTEGER
  hpnicfRateLimitConformCos INTEGER
  hpnicfRateLimitConformDscp INTEGER
  hpnicfRateLimitMeterStatByteCount Counter64
  hpnicfRateLimitMeterStatByteXCount Counter64
  hpnicfRateLimitMeterStatState INTEGER

HpnicfPriorityEntry  
SEQUENCE    
  hpnicfPriorityAclIndex INTEGER
  hpnicfPriorityIfIndex INTEGER
  hpnicfPriorityVlanID INTEGER
  hpnicfPriorityDirection INTEGER
  hpnicfPriorityUserAclNum INTEGER
  hpnicfPriorityUserAclRule INTEGER
  hpnicfPriorityIpAclNum INTEGER
  hpnicfPriorityIpAclRule INTEGER
  hpnicfPriorityLinkAclNum INTEGER
  hpnicfPriorityLinkAclRule INTEGER
  hpnicfPriorityDscp INTEGER
  hpnicfPriorityIpPre INTEGER
  hpnicfPriorityIpPreFromCos TruthValue
  hpnicfPriorityCos INTEGER
  hpnicfPriorityCosFromIpPre TruthValue
  hpnicfPriorityLocalPre INTEGER
  hpnicfPriorityPolicedServiceType INTEGER
  hpnicfPriorityPolicedServiceDscp INTEGER
  hpnicfPriorityPolicedServiceExp INTEGER
  hpnicfPriorityPolicedServiceCos INTEGER
  hpnicfPriorityPolicedServiceLoaclPre INTEGER
  hpnicfPriorityPolicedServiceDropPriority INTEGER
  hpnicfPriorityRuntime TruthValue
  hpnicfPriorityRowStatus RowStatus

HpnicfRedirectEntry  
SEQUENCE    
  hpnicfRedirectAclIndex INTEGER
  hpnicfRedirectIfIndex INTEGER
  hpnicfRedirectVlanID INTEGER
  hpnicfRedirectDirection INTEGER
  hpnicfRedirectUserAclNum INTEGER
  hpnicfRedirectUserAclRule INTEGER
  hpnicfRedirectIpAclNum INTEGER
  hpnicfRedirectIpAclRule INTEGER
  hpnicfRedirectLinkAclNum INTEGER
  hpnicfRedirectLinkAclRule INTEGER
  hpnicfRedirectToCpu TruthValue
  hpnicfRedirectToIfIndex INTEGER
  hpnicfRedirectToNextHop1 IpAddress
  hpnicfRedirectToNextHop2 IpAddress
  hpnicfRedirectRuntime TruthValue
  hpnicfRedirectRowStatus RowStatus
  hpnicfRedirectToSlotNo INTEGER
  hpnicfRedirectRemarkedDSCP INTEGER
  hpnicfRedirectRemarkedPri INTEGER
  hpnicfRedirectRemarkedTos INTEGER
  hpnicfRedirectToNextHop3 IpAddress
  hpnicfRedirectTargetVlanID INTEGER
  hpnicfRedirectMode INTEGER
  hpnicfRedirectToNestedVlanID Integer32
  hpnicfRedirectToModifiedVlanID Integer32

HpnicfStatisticEntry  
SEQUENCE    
  hpnicfStatisticAclIndex INTEGER
  hpnicfStatisticIfIndex INTEGER
  hpnicfStatisticVlanID INTEGER
  hpnicfStatisticDirection INTEGER
  hpnicfStatisticUserAclNum INTEGER
  hpnicfStatisticUserAclRule INTEGER
  hpnicfStatisticIpAclNum INTEGER
  hpnicfStatisticIpAclRule INTEGER
  hpnicfStatisticLinkAclNum INTEGER
  hpnicfStatisticLinkAclRule INTEGER
  hpnicfStatisticRuntime TruthValue
  hpnicfStatisticPacketCount Counter64
  hpnicfStatisticByteCount Counter64
  hpnicfStatisticCountClear INTEGER
  hpnicfStatisticRowStatus RowStatus
  hpnicfStatisticPacketXCount Counter64
  hpnicfStatisticByteXCount Counter64

HpnicfMirrorEntry  
SEQUENCE    
  hpnicfMirrorAclIndex INTEGER
  hpnicfMirrorIfIndex INTEGER
  hpnicfMirrorVlanID INTEGER
  hpnicfMirrorDirection INTEGER
  hpnicfMirrorUserAclNum INTEGER
  hpnicfMirrorUserAclRule INTEGER
  hpnicfMirrorIpAclNum INTEGER
  hpnicfMirrorIpAclRule INTEGER
  hpnicfMirrorLinkAclNum INTEGER
  hpnicfMirrorLinkAclRule INTEGER
  hpnicfMirrorToIfIndex INTEGER
  hpnicfMirrorToCpu TruthValue
  hpnicfMirrorRuntime TruthValue
  hpnicfMirrorRowStatus RowStatus
  hpnicfMirrorToGroup Integer32

HpnicfPortMirrorEntry  
SEQUENCE    
  hpnicfPortMirrorIfIndex INTEGER
  hpnicfPortMirrorDirection INTEGER
  hpnicfPortMirrorRowStatus RowStatus

HpnicfLineRateEntry  
SEQUENCE    
  hpnicfLineRateIfIndex INTEGER
  hpnicfLineRateDirection INTEGER
  hpnicfLineRateValue INTEGER
  hpnicfLineRateRowStatus RowStatus

HpnicfBandwidthEntry  
SEQUENCE    
  hpnicfBandwidthAclIndex INTEGER
  hpnicfBandwidthIfIndex INTEGER
  hpnicfBandwidthVlanID INTEGER
  hpnicfBandwidthDirection INTEGER
  hpnicfBandwidthIpAclNum INTEGER
  hpnicfBandwidthIpAclRule INTEGER
  hpnicfBandwidthLinkAclNum INTEGER
  hpnicfBandwidthLinkAclRule INTEGER
  hpnicfBandwidthMinGuaranteedWidth INTEGER
  hpnicfBandwidthMaxGuaranteedWidth INTEGER
  hpnicfBandwidthWeight INTEGER
  hpnicfBandwidthRuntime TruthValue
  hpnicfBandwidthRowStatus RowStatus

HpnicfRedEntry  
SEQUENCE    
  hpnicfRedAclIndex INTEGER
  hpnicfRedIfIndex INTEGER
  hpnicfRedVlanID INTEGER
  hpnicfRedDirection INTEGER
  hpnicfRedIpAclNum INTEGER
  hpnicfRedIpAclRule INTEGER
  hpnicfRedLinkAclNum INTEGER
  hpnicfRedLinkAclRule INTEGER
  hpnicfRedStartQueueLen INTEGER
  hpnicfRedStopQueueLen INTEGER
  hpnicfRedProbability INTEGER
  hpnicfRedRuntime TruthValue
  hpnicfRedRowStatus RowStatus

HpnicfMirrorGroupEntry  
SEQUENCE    
  hpnicfMirrorGroupID INTEGER
  hpnicfMirrorGroupDirection INTEGER
  hpnicfMirrorGroupMirrorIfIndexList OCTET STRING
  hpnicfMirrorGroupMonitorIfIndex INTEGER
  hpnicfMirrorGroupRowStatus RowStatus

HpnicfFlowtempEntry  
SEQUENCE    
  hpnicfFlowtempIndex INTEGER
  hpnicfFlowtempIpProtocol TruthValue
  hpnicfFlowtempTcpFlag TruthValue
  hpnicfFlowtempSPort TruthValue
  hpnicfFlowtempDPort TruthValue
  hpnicfFlowtempIcmpType TruthValue
  hpnicfFlowtempIcmpCode TruthValue
  hpnicfFlowtempFragment TruthValue
  hpnicfFlowtempDscp TruthValue
  hpnicfFlowtempIpPre TruthValue
  hpnicfFlowtempTos TruthValue
  hpnicfFlowtempSIp TruthValue
  hpnicfFlowtempSIpMask IpAddress
  hpnicfFlowtempDIp TruthValue
  hpnicfFlowtempDIpMask IpAddress
  hpnicfFlowtempEthProtocol TruthValue
  hpnicfFlowtempSMac TruthValue
  hpnicfFlowtempSMacMask MacAddress
  hpnicfFlowtempDMac TruthValue
  hpnicfFlowtempDMacMask MacAddress
  hpnicfFlowtempVpn TruthValue
  hpnicfFlowtempRowStatus RowStatus
  hpnicfFlowtempVlanId TruthValue
  hpnicfFlowtempCos TruthValue

HpnicfFlowtempEnableEntry  
SEQUENCE    
  hpnicfFlowtempEnableIfIndex INTEGER
  hpnicfFlowtempEnableVlanID INTEGER
  hpnicfFlowtempEnableFlowtempIndex INTEGER

HpnicfTrafficShapeEntry  
SEQUENCE    
  hpnicfTrafficShapeIfIndex INTEGER
  hpnicfTrafficShapeQueueId INTEGER
  hpnicfTrafficShapeMaxRate INTEGER
  hpnicfTrafficShapeBurstSize INTEGER
  hpnicfTrafficShapeBufferLimit INTEGER
  hpnicfTrafficShapeRowStatus RowStatus

HpnicfPortQueueEntry  
SEQUENCE    
  hpnicfPortQueueIfIndex INTEGER
  hpnicfPortQueueQueueID INTEGER
  hpnicfPortQueueWrrPriority INTEGER
  hpnicfPortQueueWeight INTEGER

HpnicfDropModeEntry  
SEQUENCE    
  hpnicfDropModeIfIndex INTEGER
  hpnicfDropModeMode INTEGER
  hpnicfDropModeWredIndex INTEGER

HpnicfWredEntry  
SEQUENCE    
  hpnicfWredIndex INTEGER
  hpnicfWredQueueId INTEGER
  hpnicfWredGreenMinThreshold INTEGER
  hpnicfWredGreenMaxThreshold INTEGER
  hpnicfWredGreenMaxProb INTEGER
  hpnicfWredYellowMinThreshold INTEGER
  hpnicfWredYellowMaxThreshold INTEGER
  hpnicfWredYellowMaxProb INTEGER
  hpnicfWredRedMinThreshold INTEGER
  hpnicfWredRedMaxThreshold INTEGER
  hpnicfWredRedMaxProb INTEGER
  hpnicfWredExponent INTEGER

HpnicfCosToLocalPrecedenceMapEntry  
SEQUENCE    
  hpnicfCosToLocalPrecedenceMapCosIndex INTEGER
  hpnicfCosToLocalPrecedenceMapLocalPrecedenceValue INTEGER

HpnicfCosToDropPrecedenceMapEntry  
SEQUENCE    
  hpnicfCosToDropPrecedenceMapCosIndex INTEGER
  hpnicfCosToDropPrecedenceMapDropPrecedenceValue INTEGER

HpnicfDscpMapEntry  
SEQUENCE    
  hpnicfDscpMapConformLevel INTEGER
  hpnicfDscpMapDscpIndex INTEGER
  hpnicfDscpMapDscpValue INTEGER
  hpnicfDscpMapExpValue INTEGER
  hpnicfDscpMapCosValue INTEGER
  hpnicfDscpMapLocalPrecedence INTEGER
  hpnicfDscpMapDropPrecedence INTEGER

HpnicfExpMapEntry  
SEQUENCE    
  hpnicfExpMapConformLevel INTEGER
  hpnicfExpMapExpIndex INTEGER
  hpnicfExpMapDscpValue INTEGER
  hpnicfExpMapExpValue INTEGER
  hpnicfExpMapCosValue INTEGER
  hpnicfExpMapLocalPrecedence INTEGER
  hpnicfExpMapDropPrecedence INTEGER

HpnicfLocalPrecedenceMapEntry  
SEQUENCE    
  hpnicfLocalPrecedenceMapConformLevel INTEGER
  hpnicfLocalPrecedenceMapLocalPrecedenceIndex INTEGER
  hpnicfLocalPrecedenceMapCosValue INTEGER

HpnicfPortWredEntry  
SEQUENCE    
  hpnicfPortWredIfIndex INTEGER
  hpnicfPortWredQueueID INTEGER
  hpnicfPortWredQueueStartLength INTEGER
  hpnicfPortWredQueueProbability INTEGER

HpnicfMirroringGroupEntry  
SEQUENCE    
  hpnicfMirroringGroupID INTEGER
  hpnicfMirroringGroupType INTEGER
  hpnicfMirroringGroupStatus INTEGER
  hpnicfMirroringGroupRowStatus RowStatus

HpnicfMirroringGroupMirrorEntry  
SEQUENCE    
  hpnicfMirroringGroupMirrorInboundIfIndexList OCTET STRING
  hpnicfMirroringGroupMirrorOutboundIfIndexList OCTET STRING
  hpnicfMirroringGroupMirrorRowStatus RowStatus
  hpnicfMirroringGroupMirrorInTypeList OCTET STRING
  hpnicfMirroringGroupMirrorOutTypeList OCTET STRING

HpnicfMirroringGroupMonitorEntry  
SEQUENCE    
  hpnicfMirroringGroupMonitorIfIndex INTEGER
  hpnicfMirroringGroupMonitorRowStatus RowStatus
  hpnicfMirroringGroupMonitorType HpnicfMirrorOrMonitorType

HpnicfMirroringGroupReflectorEntry  
SEQUENCE    
  hpnicfMirroringGroupReflectorIfIndex INTEGER
  hpnicfMirroringGroupReflectorRowStatus RowStatus

HpnicfMirroringGroupRprobeVlanEntry  
SEQUENCE    
  hpnicfMirroringGroupRprobeVlanID INTEGER
  hpnicfMirroringGroupRprobeVlanRowStatus RowStatus

HpnicfMirroringGroupMirrorMacEntry  
SEQUENCE    
  hpnicfMirroringGroupMirrorMacSeq Integer32
  hpnicfMirroringGroupMirrorMac MacAddress
  hpnicfMirrorMacVlanID Integer32
  hpnicfMirroringGroupMirroMacStatus RowStatus

HpnicfMirroringGroupMirrorVlanEntry  
SEQUENCE    
  hpnicfMirroringGroupMirrorVlanSeq Integer32
  hpnicfMirroringGroupMirrorVlanID Integer32
  hpnicfMirroringGroupMirrorVlanDirection INTEGER
  hpnicfMirroringGroupMirroVlanStatus RowStatus

HpnicfPortTrustEntry  
SEQUENCE    
  hpnicfPortTrustIfIndex Integer32
  hpnicfPortTrustTrustType INTEGER
  hpnicfPortTrustOvercastType INTEGER
  hpnicfPortTrustReset INTEGER

HpnicfRemarkVlanIDEntry  
SEQUENCE    
  hpnicfRemarkVlanIDAclIndex Integer32
  hpnicfRemarkVlanIDIfIndex Integer32
  hpnicfRemarkVlanIDVlanID Integer32
  hpnicfRemarkVlanIDDirection INTEGER
  hpnicfRemarkVlanIDUserAclNum Integer32
  hpnicfRemarkVlanIDUserAclRule Integer32
  hpnicfRemarkVlanIDIpAclNum Integer32
  hpnicfRemarkVlanIDIpAclRule Integer32
  hpnicfRemarkVlanIDLinkAclNum Integer32
  hpnicfRemarkVlanIDLinkAclRule Integer32
  hpnicfRemarkVlanIDRemarkVlanID Integer32
  hpnicfRemarkVlanIDPacketType INTEGER
  hpnicfRemarkVlanIDRowStatus RowStatus

HpnicfCosToDscpMapEntry  
SEQUENCE    
  hpnicfCosToDscpMapCosIndex Integer32
  hpnicfCosToDscpMapDscpValue Integer32
  hpnicfCosToDscpMapReSet INTEGER

HpnicfDscpToLocalPreMapEntry  
SEQUENCE    
  hpnicfDscpToLocalPreMapDscpIndex Integer32
  hpnicfDscpToLocalPreMapLocalPreVal Integer32
  hpnicfDscpToLocalPreMapReset INTEGER

HpnicfDscpToDropPreMapEntry  
SEQUENCE    
  hpnicfDscpToDropPreMapDscpIndex Integer32
  hpnicfDscpToDropPreMapDropPreVal Integer32
  hpnicfDscpToDropPreMapReset INTEGER

HpnicfDscpToCosMapEntry  
SEQUENCE    
  hpnicfDscpToCosMapDscpIndex Integer32
  hpnicfDscpToCosMapCosValue Integer32
  hpnicfDscpToCosMapReset INTEGER

HpnicfDscpToDscpMapEntry  
SEQUENCE    
  hpnicfDscpToDscpMapDscpIndex Integer32
  hpnicfDscpToDscpMapDscpValue Integer32
  hpnicfDscpToDscpMapReset INTEGER

Defined Values

hpnicfLswQosAclMib 1.3.6.1.4.1.11.2.14.11.15.8.35.16
Module node for qos and acl.
MODULE-IDENTITY    

hpnicfLswQosMibObject 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2
OBJECT IDENTIFIER    

hpnicfPriorityTrustMode 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.1
Priority type of inbound queue.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), dscp(1), ipprecedence(2), cos(3), localprecedence(4)  

hpnicfPortMonitorBothIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.2
The ifIndex of in/out monitor port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfQueueTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3
Queue table which contains queue entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfQueueEntry

hpnicfQueueEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1
The configuration information of queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfQueueEntry  

hpnicfQueueIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.1
ifIndex of port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hpnicfQueueScheduleMode 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.2
The mode of the queue schedule.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sp(1), wrr(2), wrr-max-delay(3), sc-0(4), sc-1(5), sc-2(6), rr(7), wfq(8), hq-wrr(9)  

hpnicfQueueWeight1 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.3
If queue mode is wfq, then hpnicfQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hpnicfQueueWeight1 represent the weight of queue 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfQueueWeight2 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.4
If queue mode is wfq, then hpnicfQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hpnicfQueueWeight2 represent the weight of queue 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfQueueWeight3 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.5
If queue mode is wfq, then hpnicfQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hpnicfQueueWeight3 represent the weight of queue 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfQueueWeight4 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.6
If queue mode is wfq, then hpnicfQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hpnicfQueueWeight4 represent the weight of queue 4.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfQueueMaxDelay 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.7
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

hpnicfQueueWeight5 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.8
If queue mode is wfq, then hpnicfQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hpnicfQueueWeight5 represent the weight of queue 5.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfQueueWeight6 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.9
If queue mode is wfq, then hpnicfQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hpnicfQueueWeight6 represent the weight of queue 6.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfQueueWeight7 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.10
If queue mode is wfq, then hpnicfQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hpnicfQueueWeight7 represent the weight of queue 7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfQueueWeight8 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.11
If queue mode is wfq, then hpnicfQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hpnicfQueueWeight8 represent the weight of queue 8.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfRateLimitTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4
Rate limit table which contains limit entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfRateLimitEntry

hpnicfRateLimitEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1
The configuration information of the rate-limited port.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfRateLimitEntry  

hpnicfRateLimitAclIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.1
Index of acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2999  

hpnicfRateLimitIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.2
ifIndex of the rate-limited port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfRateLimitVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.3
Vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfRateLimitDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.4
Direction of the rate-limited port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), input(1), output(2)  

hpnicfRateLimitUserAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.5
The number of user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 5000..5999 | 10000..12999  

hpnicfRateLimitUserAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.6
The number of user acl-rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfRateLimitIpAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.7
The number of Ip acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2000..3999 | 10000..12999  

hpnicfRateLimitIpAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.8
The number of Ip acl-rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfRateLimitLinkAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.9
The number of link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 4000..4999 | 10000..12999  

hpnicfRateLimitLinkAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.10
The number of link acl-rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfRateLimitTargetRateMbps 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.11
Target rate: Mbps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfRateLimitTargetRateKbps 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.12
Target rate: Kbps.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfRateLimitPeakRate 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.13
Peak rate of the rate-limited port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 64..8388608  

hpnicfRateLimitCIR 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.14
CIR of the rate-limited port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..34120000  

hpnicfRateLimitCBS 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.15
Burst traffic of the rate-limited port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1048575  

hpnicfRateLimitEBS 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.16
Excess burst traffic of the rate-limited port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..268435455  

hpnicfRateLimitPIR 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.17
PIR of the rate-limited port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..34120000  

hpnicfRateLimitConformLocalPre 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.18
Conform local pre.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfRateLimitConformActionType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.19
Conform action type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), remark-cos(1), remark-drop-priority(2), remark-cos-drop-priority(3), remark-policed-service(4), remark-dscp(5)  

hpnicfRateLimitExceedActionType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.20
Exceed action type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), forward(1), drop(2), remarkdscp(3), exceed-cos(4)  

hpnicfRateLimitExceedDscp 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.21
Exceed DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..63 | 255  

hpnicfRateLimitRuntime 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.22
Runtime.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfRateLimitRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.23
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfRateLimitExceedCos 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.24
Exceeding COS of rate-limited port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfRateLimitConformCos 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.25
If the user choose remark-cos value of the hpnicfRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfRateLimitConformDscp 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.26
If the user choose remark-dscp value of the hpnicfRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..63 | 255  

hpnicfRateLimitMeterStatByteCount 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.27
The counter of conform byte.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfRateLimitMeterStatByteXCount 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.28
The counter of exceed byte.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfRateLimitMeterStatState 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.29
The status of meter statistic.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER set(1), unDo(2), reset(3), running(4), notRunning(5)  

hpnicfPriorityTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5
The priority table which contains priority entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfPriorityEntry

hpnicfPriorityEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1
The configuration information of priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfPriorityEntry  

hpnicfPriorityAclIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.1
Index of acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2999  

hpnicfPriorityIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.2
ifIndex of the port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfPriorityVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.3
Vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfPriorityDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.4
Direction of data stream.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), input(1), output(2)  

hpnicfPriorityUserAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.5
The number of user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 5000..5999 | 10000..12999  

hpnicfPriorityUserAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.6
The subitem of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfPriorityIpAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.7
The number of Ip acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2000..3999 | 10000..12999  

hpnicfPriorityIpAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.8
The subitem of the IP acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfPriorityLinkAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.9
The number of Link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 4000..4999 | 10000..12999  

hpnicfPriorityLinkAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.10
The subitem of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfPriorityDscp 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.11
Set DSCP Value. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..63 | 255  

hpnicfPriorityIpPre 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.12
Set Ip precedence.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfPriorityIpPreFromCos 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.13
Set Ip precedence according to vlan priority.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfPriorityCos 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.14
Set vlan priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfPriorityCosFromIpPre 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.15
Set vlan priority according to IP precedence.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfPriorityLocalPre 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.16
Set local precedence.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfPriorityPolicedServiceType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.17
The service type of proliced Priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), auto(1), trust-dscp(2), new-dscp(3), untrusted(4)  

hpnicfPriorityPolicedServiceDscp 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.18
The service Dscp of proliced Priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..63 | 255  

hpnicfPriorityPolicedServiceExp 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.19
The service Exp of proliced Priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfPriorityPolicedServiceCos 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.20
The service COS of proliced Priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfPriorityPolicedServiceLoaclPre 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.21
The service local pre of proliced Priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfPriorityPolicedServiceDropPriority 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.22
The service drop priority of proliced Priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2 | 255  

hpnicfPriorityRuntime 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.23
Is run or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfPriorityRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.24
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfRedirectTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6
Redirect table which contains rediect entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfRedirectEntry

hpnicfRedirectEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1
Configuration information of redirection.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfRedirectEntry  

hpnicfRedirectAclIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.1
Index of acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2999  

hpnicfRedirectIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.2
ifIndex of port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfRedirectVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.3
Vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfRedirectDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.4
Direction of data stream.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), input(1), output(2)  

hpnicfRedirectUserAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.5
The number of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 5000..5999 | 10000..12999  

hpnicfRedirectUserAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.6
The subitem of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfRedirectIpAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.7
The num of the IP acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2000..3999 | 10000..12999  

hpnicfRedirectIpAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.8
The subitem of the IP acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfRedirectLinkAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.9
The num of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 4000..4999 | 10000..12999  

hpnicfRedirectLinkAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.10
The subitem of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfRedirectToCpu 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.11
Redirect to cpu.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfRedirectToIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.12
The ifIndex of port to be redirect to.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfRedirectToNextHop1 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.13
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hpnicfRedirectToNextHop2 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.14
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hpnicfRedirectRuntime 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.15
Is run or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfRedirectRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.16
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfRedirectToSlotNo 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.17
The slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..16  

hpnicfRedirectRemarkedDSCP 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.18
DSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..63 | 255  

hpnicfRedirectRemarkedPri 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.19
The priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfRedirectRemarkedTos 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.20
The TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..15 | 255  

hpnicfRedirectToNextHop3 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.21
The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hpnicfRedirectTargetVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.22
The destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfRedirectMode 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.23
The node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER strict-priority(1), load-balance(2)  

hpnicfRedirectToNestedVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.24
The nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfRedirectToModifiedVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.25
The new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfStatisticTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7
Statistic table which contains statistic entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfStatisticEntry

hpnicfStatisticEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1
Configuration about statistic information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfStatisticEntry  

hpnicfStatisticAclIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.1
Index of acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2999  

hpnicfStatisticIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.2
ifIndex of port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfStatisticVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.3
Vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfStatisticDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.4
Direction of data stream.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), input(1), output(2)  

hpnicfStatisticUserAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.5
The number of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 5000..5999 | 10000..12999  

hpnicfStatisticUserAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.6
The subitem of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfStatisticIpAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.7
The number of the IP acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2000..3999 | 10000..12999  

hpnicfStatisticIpAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.8
The subitem of the IP acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfStatisticLinkAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.9
The number of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 4000..4999 | 10000..12999  

hpnicfStatisticLinkAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.10
The subitem of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfStatisticRuntime 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.11
Is run or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfStatisticPacketCount 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.12
The counter of the packets which is matched.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfStatisticByteCount 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.13
The counter of the byte which is matched.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfStatisticCountClear 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.14
Clear the counter of the packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cleared(1), nouse(2)  

hpnicfStatisticRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.15
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfStatisticPacketXCount 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.16
The counter of the outprofile packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfStatisticByteXCount 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.17
The counter of the outprofile bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfMirrorTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8
Mirror table which contains mirror entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirrorEntry

hpnicfMirrorEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1
Configuration information to be mirrored.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirrorEntry  

hpnicfMirrorAclIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.1
Index of acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2999  

hpnicfMirrorIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.2
ifIndex of port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfMirrorVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.3
Vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfMirrorDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.4
Direction of data stream.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), input(1), output(2)  

hpnicfMirrorUserAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.5
The number of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 5000..5999 | 10000..12999  

hpnicfMirrorUserAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.6
The subitem of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfMirrorIpAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.7
The subitem of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2000..3999 | 10000..12999  

hpnicfMirrorIpAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.8
The subitem of the IP acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfMirrorLinkAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.9
The number of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 4000..4999 | 10000..12999  

hpnicfMirrorLinkAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.10
The subitem of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfMirrorToIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.11
The ifIndex of port that to be mirrored to.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfMirrorToCpu 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.12
Mirror to cpu.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfMirrorRuntime 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.13
Is run or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfMirrorRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.14
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfMirrorToGroup 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.15
The destination of stream-based mirroring is the mirroring group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfPortMirrorTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9
Port Mirror.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfPortMirrorEntry

hpnicfPortMirrorEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1
Configuration information of port mirroring.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfPortMirrorEntry  

hpnicfPortMirrorIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.1
The ifIndex of mirror port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfPortMirrorDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.2
The direction of mirror port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER in(1), out(2), both(3)  

hpnicfPortMirrorRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.3
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfLineRateTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10
Line Rate.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfLineRateEntry

hpnicfLineRateEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1
Configuration information of line-rate port.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfLineRateEntry  

hpnicfLineRateIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.1
The ifIndex of port of line rate.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfLineRateDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.2
The direction of line rate.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER in(1), out(2)  

hpnicfLineRateValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.3
The value of the line-rate.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfLineRateRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.4
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfBandwidthTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11
Bandwidth.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfBandwidthEntry

hpnicfBandwidthEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1
Configuration information of bandwidth of port.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfBandwidthEntry  

hpnicfBandwidthAclIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.1
Index of acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2999  

hpnicfBandwidthIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.2
ifIndex of port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfBandwidthVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.3
Vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfBandwidthDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.4
Direction of data stream.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), output(2)  

hpnicfBandwidthIpAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.5
The number of Ip acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2000..3999 | 10000..12999  

hpnicfBandwidthIpAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.6
The subitem of ip acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfBandwidthLinkAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.7
The number of link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 4000..4999 | 10000..12999  

hpnicfBandwidthLinkAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.8
The subitem of link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfBandwidthMinGuaranteedWidth 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.9
The min width which is guaranteed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8388608  

hpnicfBandwidthMaxGuaranteedWidth 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.10
The max width which is guaranteed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8388608  

hpnicfBandwidthWeight 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.11
Weight of bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

hpnicfBandwidthRuntime 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.12
Is run or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfBandwidthRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.13
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hpnicfRedTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12
Red table which contains RED entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfRedEntry

hpnicfRedEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1
Configuration information of RED.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfRedEntry  

hpnicfRedAclIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.1
Index of acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2999  

hpnicfRedIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.2
ifIndex of port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfRedVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.3
Vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfRedDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.4
Direction of data stream.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), output(2)  

hpnicfRedIpAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.5
The num of Ip acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 2000..3999 | 10000..12999  

hpnicfRedIpAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.6
The subitem of Ip acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfRedLinkAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.7
The number of link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 4000..4999 | 10000..12999  

hpnicfRedLinkAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.8
The subitem of link acl.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfRedStartQueueLen 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.9
The length of Starting queue.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..262128  

hpnicfRedStopQueueLen 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.10
The length of stopping queue.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..262128  

hpnicfRedProbability 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.11
Probability.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

hpnicfRedRuntime 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.12
Is run or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfRedRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.13
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hpnicfMirrorGroupTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13
Mirror Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirrorGroupEntry

hpnicfMirrorGroupEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1
Configuration information of mirroring group.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirrorGroupEntry  

hpnicfMirrorGroupID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.1
Group ID of mirroring group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..20  

hpnicfMirrorGroupDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.2
Direction of data stream which would be mirrored.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER input(1), output(2)  

hpnicfMirrorGroupMirrorIfIndexList 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.3
ifIndex list of source port.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..257)  

hpnicfMirrorGroupMonitorIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.4
ifIndex of destination port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hpnicfMirrorGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.5
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hpnicfFlowtempTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14
Flow-template table which contains flow-template entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfFlowtempEntry

hpnicfFlowtempEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1
Configuration information of flow-template.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfFlowtempEntry  

hpnicfFlowtempIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.1
Index of flow template.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(1), user-defined(2)  

hpnicfFlowtempIpProtocol 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.2
protocol-type of IP packet.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempTcpFlag 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.3
The flag of Tcp paceket.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempSPort 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.4
The port of source.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempDPort 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.5
The port of destination.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempIcmpType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.6
The type of Icmp.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempIcmpCode 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.7
The code of Icmp.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempFragment 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.8
The flag of Fragment.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempDscp 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.9
Dscp of IP packet.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempIpPre 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.10
The Precedence of Ip packet.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempTos 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.11
Tos of IP packet.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempSIp 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.12
The Ip of source.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempSIpMask 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.13
The mask of source-Ip.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hpnicfFlowtempDIp 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.14
The Ip of destination.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempDIpMask 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.15
The mask of destination-Ip.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hpnicfFlowtempEthProtocol 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.16
Protocol type of Ethernet.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempSMac 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.17
The Mac of source.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempSMacMask 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.18
The mask of source-Mac.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hpnicfFlowtempDMac 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.19
The mac of destination.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempDMacMask 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.20
The mask of destination-Mac.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hpnicfFlowtempVpn 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.21
Vpn
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.22
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfFlowtempVlanId 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.23
Source VLAN ID.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempCos 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.24
802.1P priority.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfFlowtempEnableTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15
The table of flow-template.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfFlowtempEnableEntry

hpnicfFlowtempEnableEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1
Enable entry of flow-template.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfFlowtempEnableEntry  

hpnicfFlowtempEnableIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.1
ifIndex of port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfFlowtempEnableVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.2
Vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfFlowtempEnableFlowtempIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.3
The index of Flowtemp table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(1), user-defined(2)  

hpnicfTrafficShapeTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16
The traffic-shape table which contains traffic-shape entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfTrafficShapeEntry

hpnicfTrafficShapeEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1
Configuration information of traffic-shape.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfTrafficShapeEntry  

hpnicfTrafficShapeIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.1
IfIdex of port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfTrafficShapeQueueId 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.2
ID of queue which would be shaped.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7 | 255  

hpnicfTrafficShapeMaxRate 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.3
The max rate.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfTrafficShapeBurstSize 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.4
The size of burst.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfTrafficShapeBufferLimit 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.5
The limit of buffer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0 | 16..8000  

hpnicfTrafficShapeRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.6
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfPortQueueTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17
The port-queue table which contains port-queue entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfPortQueueEntry

hpnicfPortQueueEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1
Configuration information of port-queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfPortQueueEntry  

hpnicfPortQueueIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.1
ifIndex of port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hpnicfPortQueueQueueID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.2
ID of port-queue.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfPortQueueWrrPriority 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.3
The priority of Wrr.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sp(1), wrr-high-priority(2), wrr-low-priority(3)  

hpnicfPortQueueWeight 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.4
The weight of this queue.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1..255  

hpnicfDropModeTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18
The drop-mode table which contains drop-mode entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDropModeEntry

hpnicfDropModeEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1
Configuration information of the drop-mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDropModeEntry  

hpnicfDropModeIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.1
ifIndex of port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hpnicfDropModeMode 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.2
Mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER random-detect(1), tail-drop(2)  

hpnicfDropModeWredIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.3
The index of Wred table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

hpnicfWredTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19
The Wred table which contains wred Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfWredEntry

hpnicfWredEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1
Configuration information of Wred.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfWredEntry  

hpnicfWredIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.1
Index of wred.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

hpnicfWredQueueId 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.2
Queue ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfWredGreenMinThreshold 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.3
The min threshold of Green.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfWredGreenMaxThreshold 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.4
The max threshold of Greem.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfWredGreenMaxProb 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.5
The max prob of Green.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

hpnicfWredYellowMinThreshold 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.6
The min threshold of Yellow.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfWredYellowMaxThreshold 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.7
The max threshold of Yellow.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfWredYellowMaxProb 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.8
The Prob threshold of Yellow.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

hpnicfWredRedMinThreshold 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.9
The min threshold of Red.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfWredRedMaxThreshold 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.10
The max threshold of Red.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

hpnicfWredRedMaxProb 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.11
The max prob of Red.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

hpnicfWredExponent 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.12
Exponent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

hpnicfCosToLocalPrecedenceMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20
Table of map of the COS to local-precedence.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfCosToLocalPrecedenceMapEntry

hpnicfCosToLocalPrecedenceMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1
Configuration information of map of the COS to local precedence.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfCosToLocalPrecedenceMapEntry  

hpnicfCosToLocalPrecedenceMapCosIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1.1
Index of the map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfCosToLocalPrecedenceMapLocalPrecedenceValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1.2
Value of local precedence.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfCosToDropPrecedenceMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21
The table of map of COS to drop-precedence.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfCosToDropPrecedenceMapEntry

hpnicfCosToDropPrecedenceMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1
Configuration information of the map of the COS to drop-precedence.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfCosToDropPrecedenceMapEntry  

hpnicfCosToDropPrecedenceMapCosIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1.1
Index of the map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfCosToDropPrecedenceMapDropPrecedenceValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1.2
Value of drop-precedence.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

hpnicfDscpMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22
Table of dscp map.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDscpMapEntry

hpnicfDscpMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1
Configuration information of Dscp map.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDscpMapEntry  

hpnicfDscpMapConformLevel 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.1
Conformable level of Dscp-map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

hpnicfDscpMapDscpIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.2
Index of dscp.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

hpnicfDscpMapDscpValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.3
Value of Dscp.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

hpnicfDscpMapExpValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.4
Exp value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfDscpMapCosValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.5
COS value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfDscpMapLocalPrecedence 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.6
The precedence of local.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfDscpMapDropPrecedence 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.7
The precedence of Drop.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

hpnicfExpMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23
The table of Exp-map
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfExpMapEntry

hpnicfExpMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1
Configuration information of Exp-map.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfExpMapEntry  

hpnicfExpMapConformLevel 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.1
Conformable level of Exp-map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

hpnicfExpMapExpIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.2
Index of Exp.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfExpMapDscpValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.3
Dscp value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

hpnicfExpMapExpValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.4
Exp value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfExpMapCosValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.5
COS Value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfExpMapLocalPrecedence 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.6
The precedence of local.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfExpMapDropPrecedence 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.7
The precedence of Drop.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

hpnicfLocalPrecedenceMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24
The table of local-precedence map.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfLocalPrecedenceMapEntry

hpnicfLocalPrecedenceMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1
Configuraion information of local-precedence map.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfLocalPrecedenceMapEntry  

hpnicfLocalPrecedenceMapConformLevel 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.1
Conformable level of local-precedence map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

hpnicfLocalPrecedenceMapLocalPrecedenceIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.2
Index of local-precedence.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfLocalPrecedenceMapCosValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.3
COS value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfPortWredTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25
The table of PortWred.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfPortWredEntry

hpnicfPortWredEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1
Configuration information of port Wred.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfPortWredEntry  

hpnicfPortWredIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.1
ifIndex of port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hpnicfPortWredQueueID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.2
ID of port-Wred queue.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

hpnicfPortWredQueueStartLength 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.3
Queue length.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2047  

hpnicfPortWredQueueProbability 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.4
Probability.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

hpnicfMirroringGroupTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26
The table of MirrorGroup.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirroringGroupEntry

hpnicfMirroringGroupEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1
Configuration information of MirrorGroup.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirroringGroupEntry  

hpnicfMirroringGroupID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.1
GroupID.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..20  

hpnicfMirroringGroupType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.2
GroupType.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER local(1), remote-source(2), remote-destination(3)  

hpnicfMirroringGroupStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.3
MirroringGroup status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

hpnicfMirroringGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.4
RowStatus, Now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfMirroringGroupMirrorTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27
MirroringGroup mirroring-port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirroringGroupMirrorEntry

hpnicfMirroringGroupMirrorEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1
MirroringGroup mirroring-port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirroringGroupMirrorEntry  

hpnicfMirroringGroupMirrorInboundIfIndexList 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.1
Inbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hpnicfMirroringGroupMirrorInboundIfIndexList and hpnicfMirroringGroupMirrorInTypeList. Example A: hpnicfMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hpnicfMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hpnicfMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hpnicfMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hpnicfMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the mirror source is board, the meaning reference the object HpnicfMirrorOrMonitorType), then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007' indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hpnicfMirroringGroupID separately, the result of get operation for that entry will be like the example A above. If hpnicfMirroringGroupMirrorInTypeList is not supported, the first four octets of hpnicfMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hpnicfMirroringGroupMirrorOutboundIfIndexList and hpnicfMirroringGroupMirrorOutTypeList are a pair and have the same relations like hpnicfMirroringGroupMirrorInboundIfIndexList and hpnicfMirroringGroupMirrorInTypeList pair.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfMirroringGroupMirrorOutboundIfIndexList 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.2
Outbound-Mirror ifIndex and slot number list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfMirroringGroupMirrorRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.3
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfMirroringGroupMirrorInTypeList 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.4
Inbound-Mirror type list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfMirroringGroupMirrorOutTypeList 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.5
Outbound-Mirror type list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfMirroringGroupMonitorTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28
MirroringGroup monitor-port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirroringGroupMonitorEntry

hpnicfMirroringGroupMonitorEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1
MirroringGroup monitor-port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirroringGroupMonitorEntry  

hpnicfMirroringGroupMonitorIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.1
If the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hpnicfMirroringGroupMonitorType.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfMirroringGroupMonitorRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.2
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfMirroringGroupMonitorType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.3
Specify whether the monitor destination is port or board. If this object is not supported, then the value of hpnicfMirroringGroupMonitorIfIndex means ifIndex.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfMirrorOrMonitorType  

hpnicfMirroringGroupReflectorTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29
MirroringGroup reflector-port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirroringGroupReflectorEntry

hpnicfMirroringGroupReflectorEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1
MirroringGroup reflector-port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirroringGroupReflectorEntry  

hpnicfMirroringGroupReflectorIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1.1
Only valid for remote-source MirroringGroup.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

hpnicfMirroringGroupReflectorRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1.2
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfMirroringGroupRprobeVlanTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30
MirroringGroup rprobe-vlan information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirroringGroupRprobeVlanEntry

hpnicfMirroringGroupRprobeVlanEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1
MirroringGroup rprobe-vlan information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirroringGroupRprobeVlanEntry  

hpnicfMirroringGroupRprobeVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1.1
Remote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4094  

hpnicfMirroringGroupRprobeVlanRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1.2
RowStatus, now support three status: createAndGo, active, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfMirroringGroupMirrorMacTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31
MirroringGroup MAC information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirroringGroupMirrorMacEntry

hpnicfMirroringGroupMirrorMacEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1
MirroringGroup MAC information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirroringGroupMirrorMacEntry  

hpnicfMirroringGroupMirrorMacSeq 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.1
The sequence MAC number of the same group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfMirroringGroupMirrorMac 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.2
The MAC address of the MirroringGroup.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hpnicfMirrorMacVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.3
The vlan ID of MAC address .
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hpnicfMirroringGroupMirroMacStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.4
The status of this conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfMirroringGroupMirrorVlanTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32
MirroringGroup Vlan Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMirroringGroupMirrorVlanEntry

hpnicfMirroringGroupMirrorVlanEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1
MirroringGroup Vlan Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfMirroringGroupMirrorVlanEntry  

hpnicfMirroringGroupMirrorVlanSeq 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.1
The sequence vlan number of the same group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfMirroringGroupMirrorVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.2
The vlan ID of MirroringGroup.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hpnicfMirroringGroupMirrorVlanDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.3
The vlan direction of MirroringGroup.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2), both(3)  

hpnicfMirroringGroupMirroVlanStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.4
The status of this conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfPortTrustTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33
Port trust information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfPortTrustEntry

hpnicfPortTrustEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1
Port trust information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfPortTrustEntry  

hpnicfPortTrustIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.1
ifIndex of the port which port trust is configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfPortTrustTrustType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.2
Trust type of port trust.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER port(1), cos(2), dscp(3)  

hpnicfPortTrustOvercastType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.3
Overcast type of port trust.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noOvercast(1), overcastDSCP(2), overcastCOS(3)  

hpnicfPortTrustReset 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.4
This object is used to reset port trust to default value. Read operation is meaningless.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hpnicfRemarkVlanIDTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34
Remark vlan ID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfRemarkVlanIDEntry

hpnicfRemarkVlanIDEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1
Remark vlan ID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfRemarkVlanIDEntry  

hpnicfRemarkVlanIDAclIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.1
Action identifier, acl index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2999  

hpnicfRemarkVlanIDIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.2
Action identifier, ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfRemarkVlanIDVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.3
Action identifier, vlan ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

hpnicfRemarkVlanIDDirection 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.4
Action identifier, direction of data stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER invalid(0), input(1), output(2)  

hpnicfRemarkVlanIDUserAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.5
The number of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 5000..5999 | 10000..12999  

hpnicfRemarkVlanIDUserAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.6
The subitem of the user acl.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfRemarkVlanIDIpAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.7
The num of the IP acl.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 2000..3999 | 10000..12999  

hpnicfRemarkVlanIDIpAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.8
The subitem of the IP acl.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfRemarkVlanIDLinkAclNum 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.9
The num of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 4000..4999 | 10000..12999  

hpnicfRemarkVlanIDLinkAclRule 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.10
The subitem of the link acl.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfRemarkVlanIDRemarkVlanID 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.11
Remark vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hpnicfRemarkVlanIDPacketType 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.12
Packet type of the remarked vlan ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(1), tagged(2), untagged(3)  

hpnicfRemarkVlanIDRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.13
The status of this conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfCosToDscpMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35
COS to DSCP map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfCosToDscpMapEntry

hpnicfCosToDscpMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1
COS to DSCP map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfCosToDscpMapEntry  

hpnicfCosToDscpMapCosIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.1
COS index of COS to DSCP map.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..7  

hpnicfCosToDscpMapDscpValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.2
DSCP value of COS to DSCP map.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

hpnicfCosToDscpMapReSet 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.3
This object is used to reset COS to DSCP map to default value. Read operation is meaningless.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hpnicfDscpToLocalPreMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36
DSCP to Local-precedence map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDscpToLocalPreMapEntry

hpnicfDscpToLocalPreMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1
DSCP to Local-precedence map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDscpToLocalPreMapEntry  

hpnicfDscpToLocalPreMapDscpIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.1
DSCP Index of DSCP to Local-precedence map.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..63  

hpnicfDscpToLocalPreMapLocalPreVal 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.2
Local-precedence value of DSCP to Local-precedence map.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hpnicfDscpToLocalPreMapReset 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.3
This object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hpnicfDscpToDropPreMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37
DSCP to Drop-precedence map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDscpToDropPreMapEntry

hpnicfDscpToDropPreMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1
DSCP to Drop-precedence map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDscpToDropPreMapEntry  

hpnicfDscpToDropPreMapDscpIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.1
DSCP Index of DSCP to Drop-precedence map.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..63  

hpnicfDscpToDropPreMapDropPreVal 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.2
Drop-precedence value of DSCP to Drop-precedence map.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2  

hpnicfDscpToDropPreMapReset 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.3
This object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hpnicfDscpToCosMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38
DSCP to COS map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDscpToCosMapEntry

hpnicfDscpToCosMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1
DSCP to COS map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDscpToCosMapEntry  

hpnicfDscpToCosMapDscpIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.1
DSCP index of DSCP to COS map.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..63  

hpnicfDscpToCosMapCosValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.2
COS value of DSCP to COS map.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hpnicfDscpToCosMapReset 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.3
This object is used to reset DSCP to COS map to default value. Read operation is meaningless.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hpnicfDscpToDscpMapTable 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39
DSCP to DSCP map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDscpToDscpMapEntry

hpnicfDscpToDscpMapEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1
DSCP to DSCP map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDscpToDscpMapEntry  

hpnicfDscpToDscpMapDscpIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.1
DSCP index of DSCP to DSCP map.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..63  

hpnicfDscpToDscpMapDscpValue 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.2
DSCP value of DSCP to DSCP map.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

hpnicfDscpToDscpMapReset 1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.3
This object is used to reset DSCP to DSCP map to default value. Read operation is meaningless.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)