HPN-ICF-IPX-MIB

Imported modules

Imported symbols

Integer32	MODULE-IDENTITY	OBJECT-TYPE
TimeTicks	Counter32	TEXTUAL-CONVENTION
RowStatus	hpnicfCommon

Defined Types

EnabledStatus
A simple status value for the object.
TEXTUAL-CONVENTION
	INTEGER	enabled(1), disabled(2)

HpnicfIpxIfConfigEntry
SEQUENCE
	hpnicfIpxIfIndex	Integer32
	hpnicfIpxIfNetId	OCTET STRING
	hpnicfIpxIfNodeId	OCTET STRING
	hpnicfIpxIfSplitHorizon	EnabledStatus
	hpnicfIPxIfTick	Integer32
	hpnicfIpxIfUpdateChangeOnly	EnabledStatus
	hpnicfIpxIfRipMtu	Integer32
	hpnicfIpxIfEncapsuleType	INTEGER
	hpnicfIpxIfNetbiosPropagation	EnabledStatus
	hpnicfIpxIfSapStatus	EnabledStatus
	hpnicfIpxIfSapMtu	Integer32
	hpnicfIpxIfGnsReply	EnabledStatus
	hpnicfIpxIfRowStatus	RowStatus

HpnicfIpxRouteEntry
SEQUENCE
	hpnicfIpxRouteIndex	Integer32
	hpnicfIpxRouteDestNetId	OCTET STRING
	hpnicfIpxRouteNextHop	OCTET STRING
	hpnicfIpxRoutePro	INTEGER
	hpnicfIpxRoutePre	Integer32
	hpnicfIpxRouteTicks	Integer32
	hpnicfIpxRouteHops	Integer32
	hpnicfIpxRouteTime	Integer32
	hpnicfIpxRouteOutInterface	OCTET STRING

HpnicfIpxStaticRouteEntry
SEQUENCE
	hpnicfIpxStaticRouteDestNetId	OCTET STRING
	hpnicfIpxStaticRouteNextHop	OCTET STRING
	hpnicfIpxStaticRoutePre	Integer32
	hpnicfIpxStaticRouteOutIf	OCTET STRING
	hpnicfIpxStaticRouteTicks	Integer32
	hpnicfIpxStaticRouteHops	Integer32
	hpnicfIpxStaticRouteStatus	INTEGER
	hpnicfIpxStaticRouteRowStatus	RowStatus

HpnicfIpxRouteStatEntry
SEQUENCE
	hpnicfIpxRouteStatPro	INTEGER
	hpnicfIpxRouteStatRoutes	Counter32
	hpnicfIpxRouteStatActives	Counter32
	hpnicfIpxRouteStatAddeds	Counter32
	hpnicfIpxRouteStatDeleteds	Counter32
	hpnicfIpxRouteStatFreeds	Counter32

HpnicfIpxServiceEntry
SEQUENCE
	hpnicfIpxServiceIndex	Integer32
	hpnicfIpxServiceName	OCTET STRING
	hpnicfIpxServiceType	OCTET STRING
	hpnicfIpxServiceNetId	OCTET STRING
	hpnicfIpxServiceNodeId	OCTET STRING
	hpnicfIpxServiceSocketNo	OCTET STRING
	hpnicfIpxServicePreference	Integer32
	hpnicfIpxServiceHops	Integer32
	hpnicfIpxServiceRecvIf	OCTET STRING

HpnicfIpxStaticServiceEntry
SEQUENCE
	hpnicfIpxStaticServiceType	OCTET STRING
	hpnicfIpxStaticServiceName	OCTET STRING
	hpnicfIpxStaticServiceNetId	OCTET STRING
	hpnicfIpxStaticServiceNodeId	OCTET STRING
	hpnicfIpxStatciServiceSocketNo	OCTET STRING
	hpnicfIpxStaticServicePreference	Integer32
	hpnicfIpxStaticServiceHops	Integer32
	hpnicfIpxStaticServiceStatus	INTEGER
	hpnicfIpxStaticServiceRowStatus	RowStatus

HpnicfIpxIfStatEntry
SEQUENCE
	hpnicfIpxIfStatIndex	Integer32
	hpnicfIpxIfStatNetId	OCTET STRING
	hpnicfIpxIfStatNodeId	OCTET STRING
	hpnicfIpxIfStatIpxReceives	Counter32
	hpnicfIpxIfStatIpxSends	Counter32
	hpnicfIpxIfStatIpxRecvBytes	Counter32
	hpnicfIpxIfStatIpxSendBytes	Counter32
	hpnicfIpxIfStatRipReceives	Counter32
	hpnicfIpxIfStatRipSends	Counter32
	hpnicfIpxIfStatRipDiscards	Counter32
	hpnicfIpxIfStatRipSpecReqReceives	Counter32
	hpnicfIpxIfStatRipSpecRspSends	Counter32
	hpnicfIpxIfStatRipGenReqReceives	Counter32
	hpnicfIpxIfStatRipGenRspSends	Counter32
	hpnicfIpxIfStatSapReceives	Counter32
	hpnicfIpxIfStatSapSends	Counter32
	hpnicfIpxIfStatSapDiscards	Counter32
	hpnicfIpxIfStatSapGnsReqReceives	Counter32
	hpnicfIpxIfStatSapGnsRspSends	Counter32

Defined Values

hpnicfIpx		1.3.6.1.4.1.11.2.14.11.15.2.34
This MIB defines management information used on products which support ipx protocol. It includes 4 parts: 1.ipx interface configuration group - This group contains configurable management information and statistic information on each interface. 2.rip group - Rip means route information protocol. This group contains configurable management information and route status and route statistic information. 3.sap group - Sap means service access group. This group contains all service information. 4.ipx statistics group - This group includes ipx statistic information on all interfaces.
MODULE-IDENTITY

hpnicfIpxConfig		1.3.6.1.4.1.11.2.14.11.15.2.34.1
OBJECT IDENTIFIER

hpnicfIpxRip		1.3.6.1.4.1.11.2.14.11.15.2.34.2
OBJECT IDENTIFIER

hpnicfIpxSap		1.3.6.1.4.1.11.2.14.11.15.2.34.3
OBJECT IDENTIFIER

hpnicfIpxStat		1.3.6.1.4.1.11.2.14.11.15.2.34.4
OBJECT IDENTIFIER

hpnicfIpxStatus		1.3.6.1.4.1.11.2.14.11.15.2.34.1.1
This object is used to enable or disable ipx globally.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfIpxIfConfigTable		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2
Table of configurable management information on each interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIpxIfConfigEntry

hpnicfIpxIfConfigEntry		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1
An entry in the table, containing management information about a single interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIpxIfConfigEntry

hpnicfIpxIfIndex		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.1
This variable uniquely identifies the interface to which the configurations are applied.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

hpnicfIpxIfNetId		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.2
The network number of the IPX address of this interface.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4)

hpnicfIpxIfNodeId		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.3
The node number of the IPX address of this interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

hpnicfIpxIfSplitHorizon		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.4
This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable.
Status: current	Access: read-create
OBJECT-TYPE
	EnabledStatus

hpnicfIPxIfTick		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.5
This object is used to set this interface's delay time. It is counted by ticks which is 1/18 second. By default, the ethernet interface's delay time is 1 tick, asynchronous serial interface's delay time is 30 ticks, WAN interface's delay time is 6 ticks.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..30000

hpnicfIpxIfUpdateChangeOnly		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.6
When this variable is set to 'enabled', updating change is on. And sap and rip will send updating packets periodically to avoid broadcast storm. Whereas updating change is off.
Status: current	Access: read-create
OBJECT-TYPE
	EnabledStatus

hpnicfIpxIfRipMtu		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.7
This variable is used to define the max length of RIP updating packets.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	432..1500

hpnicfIpxIfEncapsuleType		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.8
This node is used to define the encapsulating form of IPX packets. 'dot2' indicates the form is 802.2, while 'dot3' means 802.3. And 'snap' indicates the form is ethernet-snap. It takes effect only on ethernet interface, and the default value is 'dot3', while 'unkown' for other types of port.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	dot2(1), dot3(2), ethernet-2(3), snap(4), unkown(5)

hpnicfIpxIfNetbiosPropagation		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.9
This node is used to configure whether the current interface can forward broadcasting packets which IPX type is 20 used for NetBIOS.
Status: current	Access: read-create
OBJECT-TYPE
	EnabledStatus

hpnicfIpxIfSapStatus		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.10
The status of sap on the current interface. It is enabled when ipx is enabled on this interface.
Status: current	Access: read-create
OBJECT-TYPE
	EnabledStatus

hpnicfIpxIfSapMtu		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.11
This variable is used to define the max length of SAP refreshing packets.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	480..1500

hpnicfIpxIfGnsReply		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.12
This object is used to enable or disable the current interface to response the IPX GNS request.
Status: current	Access: read-create
OBJECT-TYPE
	EnabledStatus

hpnicfIpxIfRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.13
The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfIpxRouteMultiplier		1.3.6.1.4.1.11.2.14.11.15.2.34.2.1
This node is used to calculate Rip aging time of route information. The absolute aging time = (hpnicfIpxRouteMultiplier * hpnicfIpxRouteUpdateTimer).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..1000

hpnicfIpxRouteUpdateTimer		1.3.6.1.4.1.11.2.14.11.15.2.34.2.2
This node is used to set rip updating time which is based on seconds
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	10..60000

hpnicfIpxRouteImpRouteStatic		1.3.6.1.4.1.11.2.14.11.15.2.34.2.3
This object determines whether static route can be imported.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfIpxRouteLoadBalancePaths		1.3.6.1.4.1.11.2.14.11.15.2.34.2.4
This object defines the max equivalent paths to the same destination. If the newly defined value is smaller than the current value, the routes out of the new value will be set inactive.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..64

hpnicfIpxRouteMaxResPaths		1.3.6.1.4.1.11.2.14.11.15.2.34.2.5
This object defines the max dynamic routes to the same destination. If the newly defined value is smaller than the current value, the routes will not be deleted until they age out or are deleted manually.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..255

hpnicfIpxRouteTable		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6
This table contains all dynamic and direct ipx route information of this system. The information of this table is read only.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIpxRouteEntry

hpnicfIpxRouteEntry		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1
Each entry includes a dynamic or direct route.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIpxRouteEntry

hpnicfIpxRouteIndex		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.1
This object uniquely identifies a route.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hpnicfIpxRouteDestNetId		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.2
The destination network number of this route information, and its value ranges from 1 to 0xfffffffe.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

hpnicfIpxRouteNextHop		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.3
The next hop of this route.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(10)

hpnicfIpxRoutePro		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.4
The protocol type of this route information.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	direct(1), rip(2)

hpnicfIpxRoutePre		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.5
The preference of this route information. The direct route's preference is 0, and it can't be modified. Dynamic route's default preference is 100.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfIpxRouteTicks		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.6
The time, in ticks, that the packet takes to reach the destination.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65534

hpnicfIpxRouteHops		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.7
The object indicates the number of hops that the packet must be passed through to reach the destination.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..15

hpnicfIpxRouteTime		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.8
The aging time of this route information. The aging time of static and interface route information is 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..60000000

hpnicfIpxRouteOutInterface		1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.9
The out interface of this route information.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..30)

hpnicfIpxStaticRouteTable		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7
This table contains all static ipx route information of this system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIpxStaticRouteEntry

hpnicfIpxStaticRouteEntry		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1
Each entry includes one static route information.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIpxStaticRouteEntry

hpnicfIpxStaticRouteDestNetId		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.1
The index of Static Route Table. This object and hpnicfIpxStaticRouteNextHop uniquely identify a static route. The destination network number of this static route information,and its value ranges from 1 to 0xfffffffe. Note that the broadcast network number is 0xffffffff and is not allowed in IPX. The network number of 0xfffffffe would be considered to be the network number of default route.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(4)

hpnicfIpxStaticRouteNextHop		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.2
The sub-index of Static Route Table. The next hop of this static route information.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(10)

hpnicfIpxStaticRoutePre		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.3
The preference of this route information. Static route's preference is 60, and it can be configured.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

hpnicfIpxStaticRouteOutIf		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.4
The out interface of this route. This interface can be serial or pos interface.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..30)

hpnicfIpxStaticRouteTicks		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.5
The time, in ticks that the packet takes to reach the destination with the static route.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..65534

hpnicfIpxStaticRouteHops		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.6
This object indicates how many hops are needed to arrive at the destination network.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hpnicfIpxStaticRouteStatus		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.7
The status of this static route.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

hpnicfIpxStaticRouteRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.8
The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfIpxRouteStatTable		1.3.6.1.4.1.11.2.14.11.15.2.34.2.8
A table includes all statistic route information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIpxRouteStatEntry

hpnicfIpxRouteStatEntry		1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1
An entry records a statistic information of route.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIpxRouteStatEntry

hpnicfIpxRouteStatPro		1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.1
The protocol type of the route information. The value of 'total' is the total amount of all kinds of IPX routes.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	direct(1), static(2), rip(3), default(4), total(5)

hpnicfIpxRouteStatRoutes		1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.2
The route amount of the corresponding protocol type.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxRouteStatActives		1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.3
The active route amount of the corresponding protocol type.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxRouteStatAddeds		1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.4
The added route amount of the corresponding protocol type.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxRouteStatDeleteds		1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.5
The deleted but not freed route amount of the corresponding protocol type.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxRouteStatFreeds		1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.6
The freed route amount of the corresponding protocol type.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxSapMultiplier		1.3.6.1.4.1.11.2.14.11.15.2.34.3.1
This node is used to calculate aging time of service information. The absolute aging time = (hpnicfIpxSapMultiplier * hpnicfIpxSapUpdateTimer).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..1000

hpnicfIpxSapUpdateTimer		1.3.6.1.4.1.11.2.14.11.15.2.34.3.2
This node is used to set service packet updating time which is based on seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	10..60000

hpnicfIpxSapGnsLoadBalance		1.3.6.1.4.1.11.2.14.11.15.2.34.3.3
This object is used to set whether the system will reply to the GNS request with the Round-Robin way. By default, the system will response to the GNS request with the servers known to the device in turn, preventing from the nearest server's over loading. With value of disabled, in this way, the system will response to the request with the nearest server(who has smallest hop in system's service information table).
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfIpxSapMaxResServers		1.3.6.1.4.1.11.2.14.11.15.2.34.3.4
This object is used to configure maximum number of servers of a type. If the newly defined value is smaller than the previous value, the information out of the value will not be deleted. If the queue reaches to the maximum number, no new information can be added.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..2048

hpnicfIpxServiceTable		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5
This table inlcudes all dynamic service information. The dynamic service information can be read only.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIpxServiceEntry

hpnicfIpxServiceEntry		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1
One entry records one service
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIpxServiceEntry

hpnicfIpxServiceIndex		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.1
This object uniquely identifies a service information.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hpnicfIpxServiceName		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.2
The name of the service.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..47)

hpnicfIpxServiceType		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.3
The service type.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

hpnicfIpxServiceNetId		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.4
The IPX network number portion of the IPX address of the service.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

hpnicfIpxServiceNodeId		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.5
The IPX node number portion of the IPX address of the service.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

hpnicfIpxServiceSocketNo		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.6
The socket portion of the IPX address of the service
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

hpnicfIpxServicePreference		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.7
The service preference of the service
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfIpxServiceHops		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.8
The hops from the device to the server.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..15

hpnicfIpxServiceRecvIf		1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.9
Interface from which the service is receieved
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..30)

hpnicfIpxStaticServiceTable		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6
This table inlcudes all static service information. This table supports to creation and deletione of a static service, but not supports to modification
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIpxStaticServiceEntry

hpnicfIpxStaticServiceEntry		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1
An entry records one service
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIpxStaticServiceEntry

hpnicfIpxStaticServiceType		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.1
The index of static service table.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(2)

hpnicfIpxStaticServiceName		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.2
The sub-index of static service table. The name of the service.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..47)

hpnicfIpxStaticServiceNetId		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.3
The sub-index of static service table. The IPX network number portion of the IPX address of the service.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(4)

hpnicfIpxStaticServiceNodeId		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.4
The IPX node number portion of the IPX address of the service.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(6)

hpnicfIpxStatciServiceSocketNo		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.5
The socket portion of the IPX address of the service.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(2)

hpnicfIpxStaticServicePreference		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.6
The service preference of the server.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

hpnicfIpxStaticServiceHops		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.7
The hops from the device to the server.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..15

hpnicfIpxStaticServiceStatus		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.8
The status of the service that you created. The value of this object is determined by system.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

hpnicfIpxStaticServiceRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.9
The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfIpxStatGlobal		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1
OBJECT IDENTIFIER

hpnicfIpxStatInterface		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2
OBJECT IDENTIFIER

hpnicfIpxStatTotalReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.1
The total number of packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatPitchs		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.2
The number of received packets filled by device when forwarding or delivering up to upper protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatLenErrors		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.3
The number of received packets discarded due to length error.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatFormatErrors		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.4
The number of received packets discarded due to format error.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatBadHops		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.5
The number of received packets which's value of field Hops is greater than 16.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatHopsDiscards		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.6
The number of received packets of which hops portion is equal to 16.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatOtherErrors		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.7
The number of received packets discarded due to other error.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatLocalDests		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.8
The number of received packets which destination is the local device. Note that this would include the IPX NetBIOS propagation packets and those broadcast packets just to the network on which local device resides.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatCantDeals		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.9
The number of received packets with which can't be dealt. One possible reason for discarding such a packet would be receiving a packet of an unknown or unsupported protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatForwards		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.10
The number of received packets to be forwarded in the case that the entity was not their final destination.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatGenerates		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.11
The number of sent packets that the device generated itself.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatNoRoutes		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.12
The number of packets discarded due to no route to the destination was found in routing table.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatOutDiscards		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.13
The number of packets to be discarded when sending out. Note that this counter would not include the packet(s) discarded due to no route.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatRipSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.14
The total number of RIP packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatRipReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.15
The total number of RIP packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStaRipRspSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.16
The total number of RIP response packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStaRipRspReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.17
The total number of RIP response packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatRipReqReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.18
The total number of RIP request packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatRipReqDeals		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.19
The total number of RIP request packets dealt with.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatRipReqSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.20
The total number of RIP request packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatRipPeriUpdates		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.21
The total number of periodic update RIP packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatSapGenReqReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.22
The total number of SAP general request packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatSapSpecReqReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.23
The total number of SAP specific request packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatSapGnsReqReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.24
The total number of SAP GNS request packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatSapGenRspSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.25
The total number of SAP general response packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatSapSpecRspSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.26
The total number of SAP specific response packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatSapGnsRspSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.27
The total number of SAP GNS response packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatSapPeriUpdates		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.28
The total number of SAP periodic update packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxStatSapInPktErrors		1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.29
The total number of SAP error packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatTable		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1
The table of the statistic information on each interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfIpxIfStatEntry

hpnicfIpxIfStatEntry		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1
The entry of the statistic table.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfIpxIfStatEntry

hpnicfIpxIfStatIndex		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.1
The index of the table's entry. According to the interface's index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

hpnicfIpxIfStatNetId		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.2
The network number of the IPX address of this interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

hpnicfIpxIfStatNodeId		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.3
The node number of the IPX address of this interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

hpnicfIpxIfStatIpxReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.4
The total number of packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatIpxSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.5
The total number of packets sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatIpxRecvBytes		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.6
The total number of bytes received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatIpxSendBytes		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.7
The total number of bytes sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatRipReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.8
The total number of RIP packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatRipSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.9
The total number of RIP packets sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatRipDiscards		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.10
The total number of RIP packets discarded on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatRipSpecReqReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.11
The total number of RIP specific request packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatRipSpecRspSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.12
The total number of RIP specific response packets sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatRipGenReqReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.13
The total number of RIP general request packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatRipGenRspSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.14
The total number of RIP general response packets sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatSapReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.15
The total number of SAP packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatSapSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.16
The total number of SAP packets sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatSapDiscards		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.17
The total number of SAP packets discarded on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatSapGnsReqReceives		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.18
The total number of SAP GNS response packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfIpxIfStatSapGnsRspSends		1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.19
The total number of SAP GNS response packets sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32